Eco-friendly synthesis of mesoporous bioactive glass ceramics and functionalization for drug delivery and hard tissue engineering applications

Hard tissue regenerative mesoporous bioactive glass (MBG) has traditionally been synthesized using costly and toxic alkoxysilane agents and harsh conditions. In this study, MBG was synthesized using the cheaper reagent SiO2by using a co-precipitation approach. The surface properties of MBG ceramic were tailored by functionalizing with amino and carboxylic groups, aiming to develop an efficient drug delivery system for treating bone infections occurring during or after reconstruction surgeries. The amino groups were introduced through a salinization reaction, while the carboxylate groups were added via a chain elongation reaction. The MBG, MBG-NH2, and MBG-NH-COOH were analyzed by using various techniques: x-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Brunauer-Emmett-Teller (BET), scanning electron microscopy and energy-dispersive x-ray spectroscopy. The XRD results confirmed the successful preparation of MBG, and the FTIR results indicated successful functionalization. BET analysis revealed that the prepared samples were mesoporous, and functionalization tuned their surface area and surface properties. Cefixime, an antibiotic, was loaded onto MBG, MBG-NH2, and MBG-NH-COOH to test their drug-carrying capacity. Comparatively, MBG-NH-COOH showed good drug loading and sustained release behavior. The release of the drug followed the Fickian diffusion mechanism. All prepared samples displayed favorable biocompatibility at higher concentration in the Alamar blue assay with MC3T3 cells and exhibited the good potential for hard tissue regeneration, as carbonated hydroxyapatite formed on their surfaces in simulated body fluid.

Exploring the Mechanism of Anionic Chemosensing by Imidazoles: A Review

Chemosensing of ions has gained considerable attention by chemists. Insight into the mechanism involved between sensors and ions always fascinates researchers to develop economical, sensitive, selective, and robust sensors. This review comprehensively explores the mechanism of interaction between Imidazole sensors and anions. With most of the research concentrating only on fluoride and cyanide, this review has highlighted a large gap in various anions detection including SCN^-, Cr₂O₇^2-, CrO₄^2-, H₂PO₄^-, NO₂^-, and HSO₄^-.This study also includes a critical analysis of different mechanisms and their respective limits of detection, with a discussion of the reported results.

Addition of transglutaminase enzyme in camel milk yoghurt to increase its sensorial aspects

Camel milk was obtained from A-block UVAS Ravi Campus Pattoki. After pasteurization at 72 °C (15 sec) it was cooled to 42 °C, then glutathione treated transglutaminase enzyme was added with the concentration of 0.5 g/300 mL, 1 g/300 mL, 1.5 g/300 mL, 2 g/300 mL while control sample with the addition of 1.5 g/300 mL gelatin. Then inoculation of milk was done with standard cultures of Yoghurt Lactobacillus delbrueckii subsp bulgaricus and Streptococcus thermophilus at the rate of 2% for 3-4 hours at 42 °C. Samples were stored at 4 °C and were analyzed on 1st day and 28th day of storage. In our findings, there was slight increase in sensorial properties of all the samples. It was also observed that syneresis was reduced with the increase of enzyme quantity.

Fabrication of sensor based on polyvinyl alcohol functionalized tungsten oxide/reduced graphene oxide nanocomposite for electrochemical monitoring of 4-aminophenol

4-aminophenol (4-AP) is one of the major environmental pollutants which is broadly exploited as drug intermediate in the pharmaceutical formulations. The extensive release of 4-AP in the environment without treatment has become a serious issue that has led several health effects on humans. This work describe the determination of 4-AP through a new chemically modified sensor based on polyvinyl alcohol functionalized tungsten oxide/reduced graphene oxide (PVA/WO₃/rGO) nanocomposite. The fabricated nanocomposite was characterized through XRD and HR-TEM to confirm the crystalline structure with average size of 35.9 nm and 2D texture with ultra-fine sheets. The electrochemical characterization of fabricated sensor was carried out by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) to ensure the charge transfer kinetics of modified sensor that revealed high conductivity of PVA/WO₃/rGO/GCE. Under optimized conditions e.g. scan rate 80 mV/s, phosphate buffer (pH 6) as supporting electrolyte and potential window from -0.2 to 0.8 V, the prepared sensor showed excellent response for 4-AP. The linear dynamic range of developed method was optimized as 0.003-70 μM. The LOD of fabricated sensor based on PVA/WO₃/rGO/GCE for 4-AP was calculated as 0.51 nM. The practical application of PVA/WO₃/rGO/GCE was tested in real water and pharmaceutical samples. The fabricated sensor presented here, exhibited exceptional stability and sensitivity than the reported sensors and could be effectively used for the monitoring 4-AP without interferences.

Fe-POM/attapulgite composite materials: Efficient catalysts for plastic pyrolysis

This article describes the catalytic cracking of low-density polyethylene over attapulgite clay and iron substituted tungstophosphate/attapulgite clay (Fe-POM/attapulgite) composite materials to evaluate their suitability and performance for recycling of plastic waste into liquid fuel. The prepared catalysts enhanced the yield of liquid fuel (hydrocarbons) produced in cracking process. A maximum yield of 82% liquid oil fraction with a negligible amount of coke was obtained for 50% Fe-POM/attapulgite composite. Whereas, only 68% liquid oil fractions with a large amount of solid black residue was produced in case of non-catalytic pyrolysis. Moreover, Fe-POM/attapulgite clay composites showed higher selectivity towards lower hydrocarbons (C₅-C₁₂) with aliphatic hydrocarbons as major fractions. These synthesised composite catalysts significantly lowered the pyrolysis temperature from 375°C to 310°C. Hence, recovery of valuable fuel oil from polyethylene using these synthesised catalysts suggested their applicability for energy production from plastic waste at industrial level as well as for effective environment pollution control.

Sulfonamides as Optical Chemosensors

Sulfonamides are auspicious chemosensors which are capable to bind with ionic species through various ways like complexation, charge transfer, proton transfer etc. and produce a detection signal in the form of an optical change either in visible or UV-light and for electronic as well as fluorimetric spectra. Sulfonamides have gained much attention of analytical chemists these days as these are inexpensive, robust, green in nature and some what sensitive and selective to many anionic and cationic species. Due to their promising versatility in sensing properties, these are under great consideration in forensic, environmental, analytical and biochemistry laboratories. This review narrates how sulfonamides are being used to optically sense ionic species.

Natural and anthropogenic origin of metallic contamination and health risk assessment: A hydro-geochemical study of Sehwan Sharif, Pakistan

Heavy metal contamination in groundwater is a serious threat to the environment and therefore its proper monitoring is a matter of great concern these days. In the present research, groundwater samples from Sehwan Sharif district Jamshoro, Pakistan were collected to estimate the concentration of various elements including potentially hazardous metals. Statistical analysis of the collected data based on Pearson co-relation metal clustering and Principal Component Analysis (PCA) divides the elements into three groups; Group I contains As, Cu, Ni, and Cd, Group II contains Mn, Fe, B, and Cr and Group III contains Pb and Zn. The elements Cu, Ni, As, Pb, Cd, and Zn found with higher RSD values demonstrate their anthropogenic origin whereas the lower concentration of Mn, Fe, B, and Cr indicate their natural origin (Tepanosyan et al., 2016). The histograms and box-plots of Mn, Fe, B and Cr were found normally distributed while abnormal for Cu, Ni, Pb, As, Cd and Zn. The HQs of these elements indicate their non-carcinogenic risks. However, results of individual metallic behavior indicate the highest HQ measured for B followed by HQs for Cu, and As. The toxic effects of investigated metal (loid)s calculated using HI were found to be 1.58 for adults and 1.35 for the child which is considered the medium chromic risk and cancer risk. About the toxicity of these heavy metals, their cancer risk was assessed on the levels of Cd, As, and Cr in groundwater. The carcinogenic risk of As was found to be 2.78 × 10^-4 and 1.62 × 10^-3 for child and adult, respectively. Furthermore, the values of this carcinogenic risk are 2.64 × 10^-6 and 1.54 × 10^-5 for Cd while 4.24 × 10^-3 and 2.48 × 10^-2 for Cr in child and adult, respectively. Since cancer risk exceeded the target risk of 1 × 10^-4 for As and Cr in adults and children, it can thus be considered 'non-acceptable'. The Geographic Information System (GIS) based maps were prepared using Inverse Distance Weighted (IDW) interpolation which showed the Spatial distribution of all elements throughout Sehwan Sharif from different sources of environment. Spatial maps of elements produced by ArcGIS show the hotspots of potentially hazardous elements such as the highest concentration of Pb, As, Zn, Cu, Ni, and Cd were found in urban areas of Sehwan Sharif district Jamshoro, Pakistan.

Formulation and Characterization of Calcium-Fortified Jelly and Its Proximate Composition and Sensory Analysis

Calcium is a dynamic mineral. Recent discoveries designate that low intake of calcium generates deficiencies and path to other diseases. Food fortification could play a key role to overcome this problem. To cope with this deficiency problem, jellies were formulated with food-grade calcium salts and chicken eggshell powder. In the present study, three different concentrations of calcium salts, as well as eggshell powder were used to formulate jellies. The results of the sensory evaluation indicated that the two jelly products (A&D) in the current study were suitable for consumers. Results of Atomic Absorption Spectrophotometer revealed Jelly A and jelly D had 151±0.05 ppm and 133±0.06 ppm calcium concentration, respectively. Proximate analysis of Jelly A showed that it has 6.0±0.01% ash, 9.2±0.1% moisture, 0.4±0.01 g crude protein, 82.79±0.001 g crude fiber, and 0.61±0.001 g crude fat, while the jelly D that was made with chicken eggshell powder exhibited 6.0±0.01% ash, 10.1±0.1% moisture, 0.5±0.01 g protein, 84.54±0.01 g crude fiber and 1.61±0.01 g crude fat. Therefore, these two jelly A & D were greatly appreciated among other attributes. In spite of naturally available calcium-rich sources, calcium-fortified jellies can be consumed by individuals who are incapable to take sufficient calcium from their diet.

Carbon dots as naked eye sensors

Optical sensors are always fascinating for chemists due to their selectivity, sensitivity, robustness and cost-effective nature.

Metal Ion Detection by Carbon Dots-A Review

Development of economical, sensitive, selective and robust sensors for metal ion sensing is always fascinating for a chemist because traditional routs for their detection involve complicated instrumentation and critical sample preparation procedures. A large number of metal ion detectors including carbon dots (CDs) have been reported for sensitive and selective detection of metal ions. This review comprehensively explores the use of CDs as metallic cation sensors. CDs are being fabricated from variety of carbon sources by employing various synthetic channels. CDs are proved to be efficient colorimetric and fluorimetric detectors due to surface oxygen moieties which are responsible to co-ordinate with metal ions. Doping of CDs with hetero atom such as N, S, B etc. may further enhance their activity toward metal detection. Therefore, designing of CDs having selective sensing properties with low detection limits has gained significant interest.HighlightsCDs have gained much attention as chemical sensors due to their dynamic features i.e. less toxicity, stability, solubility in various solvents, absorption in UV/Vis. region, fluorescence and tunable physico-chemical properties.These are coast effective, sensitive and selective colorimetric and fluorimetric metal ion sensors.Detection of metal ions by CDs involves different mechanisms such as complexation, aggregation, electron transfer, inner filter effect etc.LOD data is an evidence of their greater efficiency.

Highly efficient catalytic pyrolysis of polyethylene waste to derive fuel products by novel polyoxometalate/kaolin composites

We report here alumina-substituted Keggin tungstoborate/kaolin clay composite materials (KAB/kaolin) as polyethylene cracking catalysts. KAB/kaolin composites with varying concentrations of KAB (10-50 wt.%) were synthesized by the wet impregnation method and successfully characterized by Fourier-transform infrared spectroscopy, powder X-ray diffraction, thermo-gravimetric analysis and scanning electron microscopy with energy dispersive X-ray spectroscopy analytical techniques. Use of KAB loaded kaolin composites as the catalyst for low-density polyethylene (LDPE) cracking exhibited a higher percentage of polymer conversion (99%), producing 84 wt.% of fuel oil and negligible amount (˂ 1 wt.%) of solid residue while thermal cracking produced ~22 wt.% residue. Furthermore, gas chromatography-mass spectrometry analysis of oil obtained by non-catalytic cracking exhibited a high selectivity to high molecular weight hydrocarbons (C₁₃-C₂₃) compared to the catalytic cracking where 70 mol.% of gasoline range hydrocarbons (C₅-C₁₂) were produced. We propose that higher cracking ability of our prepared catalysts might ensue from both Brønsted and Lewis acid sites (from KAB and kaolin respectively), which enhanced the yield of liquid fuel products and reduced the cracking temperature of LDPE. These findings suggest that the prepared composites were cost-effective and excellent cracking catalysts that could be recommended for highly efficient conversion of waste plastic materials to petrochemicals at an industrial scale.

P4146The six-transmembrane protein Stamp2 protects from hypoxia-induced pulmonary vascular remodeling and pulmonary hypertension via actions in mononuclear cells and CXCL12

Background

The six-transmembrane protein of prostate (Stamp2) is a potent anti-inflammatory player in adipocytes and also in macrophages. Stamp2's actions in these cells protects from diet-induced diabetes and from atherosclerosis mice. As chronic inflammation is a hallmark of pulmonary arterial hypertension (PH), we sought to investigate the role of Stamp2 in PH.

Methods and results

Morphometric analyses of small pulmonary arteries after 3 weeks of chronic hypoxia (10% O2) showed aggravated pulmonary vascular remodeling in Stamp2−/− mice as compared to WT, demonstrated by a significantly reduced number of non-muscularized vessels and higher extent of fully-muscularized vessels. Consequently, right ventricular systolic pressure (RVSP, Millar catheter via right jugular vein) was significantly higher in Stamp2−/− mice (33.4±0.7 mmHg vs. 30.3±1.4, p<0.05). As endothelial (EC) and smooth muscle cells (PASMC) are critical for remodeling processes in PH, the role of Stamp2 in these cells was explored. However, siRNA-mediated knock-down of Stamp2 in human microvascular EC had no effect on apoptotic susceptibility (CellDeath Detection ELISA), or release of IL-6 (qPCR). Furthermore, Stamp2-deficiency in isolated primary PASMC had no effect on proliferation (BrdU incorporation) and chemotaxis (modified Boyden chamber). As Stamp2 deficiency promotes higher expression of inflammatory cytokines (IL6, IL1b, MCP1, TNFa, CXCL12, qPCR) and increased numbers of CD68-positive cells in the lung, actions of Stamp2 in macrophages are potentially driving vascular remodeling in PH. To test this hypothesis, PASMC proliferation and chemotaxis were assessed in response to treatment with supernatants from primary thioglycolate-elicited peritoneal Stamp2−/− or WT-macrophages. These experiments revealed that supernatants from Stamp2−/− macrophages induced PASMC proliferation and chemotaxis significantly stronger, thus providing a link between inflammatory actions in Stamp2 deficiency and vascular remodeling. To gain further insights, a cytokine array was performed with supernatants from Stamp2−/− and WT-macrophages, revealing CXCL12 as the most relevant candidate. Experiments with neutralizing antibodies confirmed the role of CXCL12 in driving Stamp2's actions on vascular remodelling processes in PASMC.

Importantly, Stamp2 expression (qPCR, western blot analyses) was significantly lower in the lung of humans with idiopathic PAH (IPAH), as well as in experimental PH in rats (monocrotalin, sugen/hypoxia) and in mice (hypoxia).

Conclusions

Stamp2 deficiency aggravates hypoxia-induced pulmonary vascular remodeling and pulmonary hypertension in mice. On the cellular level, actions of Stamp2 in macrophages drive vascular remodelling processes in smooth muscle cells via secreted factors such as CXCL12. The finding of decreased expression of Stamp2 in human and various experimental forms of PH points towards a general protective role of Stamp2.

Synthesis of antibacterial poly(o-chloroaniline)/chromium hybrid composites with enhanced electrical conductivity

Electrically conductive polyorthochloroaniline/chromium nanocomposites (POC/Cr NCs) were prepared by in situ chemical oxidative polymerization of orthochloroaniline in the presence of Cr nanoparticles (Cr NPs). The load percentage of Cr nanofiller was varied in POC matrix to investigate the effect of Cr nanoparticles on the properties of the nanocomposites. The composition, structure, and morphology of POC and its composites were examined by Scanning electron microscopy, Fourier transform infrared spectroscopy, and UV–visible spectroscopic analysis. The antibacterial potential of POC and its composites was evaluated by the disc diffusion method against Escherichia coli and Bacillus subtilis. The results showed the improved antibacterial potential with the increase in the load percentage of nanofiller. The electrical conductivity of polymer and its composites was measured and correlated with the load percentage. The results showed that electrical conductivity of the composites was enhanced with the increase in load percentage of Cr nanoparticles.

Report: Central nervous system (CNS) toxicity caused by metal poisoning: Brain as a target organ

People relate the neural disorders with either inheritance or psychological violence but there might be some other reasons responsible for the ailment of people that do not have such a background. The present study explains the chronic effect of heavy toxic metals on nervous system. During experimentation, rabbits used as laboratory animals, were given test metals in their diet. Concentration of metals given to them in the diet was less than their tolerable dietary intake. Behavioral changes were observed during experimentation. Periodic increase in the metal concentration was seen in the blood sample of rabbits. They were slaughtered after a period of eight months of slow poisoning. Histological examination of brain tissues was performed. The brain samples were analyzed by Atomic absorption spectroscopy and Inductively Coupled Plasma Mass Spectrometry to find the retention of heavy metals in mammalian brain. Concentration of lead, mercury and cadmium in the blood samples of occupationally exposed people and patients with neurological disorders at the time of neurosurgery was determined by using the same techniques. During circulation, toxic metals passes through the nerve capillaries to settle down in the brain. Heavy metals cross the blood brain barrier and 'may retain themselves in it. Brain tumors and biopsy samples of patients with neurological disorder were also analyzed to relate neurotoxicity and heavy metal poisoning. Results obtained shows that lead, mercury and cadmium retain themselves in the brain for longer period of time and are one of the causes of neurotoxicity.

Long-term results of subtotal colectomy and evidence of noncolonic involvement in patients with idiopathic slow-transit constipation

BACKGROUND

Patients with chronic idiopathic constipation can be difficult to manage either medically or surgically. We report our experience of long-term follow-up of 21 patients who had undergone colectomy with ileorectal anastomosis for difficult chronic idiopathic constipation.

METHODS

The patients (19 female, 2 male) were aged 26-68 (median = 46) years and had undergone subtotal colectomy 5-12 (median = 8) years before their assessment. They answered a questionnaire about severity of abdominal pain, bloating, urgency, and straining. They also completed the hospital anxiety and depression questionnaire. Fifteen ulcerative colitis patients with panproctocolectomy and 13 colon cancer patients with colonic resection who had a similar follow-up period served as control groups. The following assessments were performed in chronic idiopathic constipation patients with subtotal colectomy: a) oesophageal manometry; b) scintigraphic gastric emptying test; c) review of barium follow-through; d) glucose H2 breath test; e) urodynamic studies; and f) autonomic function tests.

RESULTS

Twenty-four per cent of patients with chronic idiopathic constipation had a family history of difficult constipation requiring hospital investigations and treatment. At the time of assessment abdominal pain, bloating, urgency, and straining at defecation were all significantly more frequent in patients with chronic idiopathic constipation with colectomy than in the control groups with colectomy. Seventy-one per cent of chronic idiopathic constipation patients had at least one episode of intestinal obstruction after subtotal colectomy, which is significantly higher (P < 0.01) than in the control groups (ulcerative colitis, 13%; colonic carcinoma, 8%). In patients with chronic idiopathic constipation, among those studied, 68% had some oesophageal motor dysfunction: 19% delayed gastric emptying; 10%, prolonged small-bowel transit on barium follow-through; 54%, abnormal urodynamic variables; and 14%, abnormal autonomic function tests.

CONCLUSIONS

This study shows considerable morbidity in a selected cohort of patients with chronic idiopathic constipation who were sufficiently disabled by their symptoms to undergo subtotal colectomy. They had more abdominal and rectal symptoms and more frequent intestinal obstructive episodes than control groups with colonic resection. Evidence of generalized smooth-muscle dysfunction and familial occurrence of constipation suggests a primary chronic intestinal pseudo-obstruction-like disorder in some of these patients.