Injectable Tissue-Specific Hydrogel System for Pulp-Dentin Regeneration

The quest for finding a suitable scaffold system that supports cell survival and function and, ultimately, the regeneration of the pulp-dentin complex remains challenging. Herein, we hypothesized that dental pulp stem cells (DPSCs) encapsulated in a collagen-based hydrogel with varying stiffness would regenerate functional dental pulp and dentin when concentrically injected into the tooth slices. Collagen hydrogels with concentrations of 3 mg/mL (Col3) and 10 mg/mL (Col10) were prepared, and their stiffness and microstructure were assessed using a rheometer and scanning electron microscopy, respectively. DPSCs were then encapsulated in the hydrogels, and their viability and differentiation capacity toward endothelial and odontogenic lineages were evaluated using live/dead assay and quantitative real-time polymerase chain reaction. For in vivo experiments, DPSC-encapsulated collagen hydrogels with different stiffness, with or without growth factors, were injected into pulp chambers of dentin tooth slices and implanted subcutaneously in severe combined immunodeficient (SCID) mice. Specifically, vascular endothelial growth factor (VEGF [50 ng/mL]) was loaded into Col3 and bone morphogenetic protein (BMP2 [50 ng/mL]) into Col10. Pulp-dentin regeneration was evaluated by histological and immunofluorescence staining. Data were analyzed using 1-way or 2-way analysis of variance accordingly (α = 0.05). Rheology and microscopy data revealed that Col10 had a stiffness of 8,142 Pa with a more condensed and less porous structure, whereas Col3 had a stiffness of 735 Pa with a loose microstructure. Furthermore, both Col3 and Col10 supported DPSCs' survival. Quantitative polymerase chain reaction showed Col3 promoted significantly higher von Willebrand factor (VWF) and CD31 expression after 7 and 14 d under endothelial differentiation conditions (P < 0.05), whereas Col10 enhanced the expression of dentin sialophosphoprotein (DSPP), alkaline phosphatase (ALP), runt-related transcription factor 2 (Runx2), and collagen 1 (Col1) after 7, 14, and 21 d of odontogenic differentiation (P < 0.05). Hematoxylin and eosin and immunofluorescence (CD31 and vWF) staining revealed Col10+Col3+DPSCs+GFs enhanced pulp-dentin tissue regeneration. In conclusion, the collagen-based concentric construct modified by growth factors guided the specific lineage differentiation of DPSCs and promoted pulp-dentin tissue regeneration in vivo.

Citric Acid Conditioning as an Alternative to EDTA for Growth Factors Release and Stem Cell Response in Regenerative Endodontics: A Systematic Review of In Vitro Studies

INTRODUCTION

Citric acid (CA) conditioning may be a promising alternative to ethylenediaminetetraacetic acid (EDTA) in regenerative endodontic procedures, as reported to improve growth factors' release from dentin. This review systematically investigated the effect of CA conditioning on the growth factors release from dentin and cell behavior compared to EDTA conditioning.

METHODS

Searches were conducted (PubMed/MEDLINE, Scopus, Web of Science, Embase, SciELO, Cochrane Library, and grey literature) until May-2023. Only in vitro studies that evaluated the effects of CA on growth factors' release from dentin and cell behavior outcomes compared to EDTA were included. The studies were critically appraised using a modified Joanna Briggs Institute's checklist. Meta-analysis was unfeasible.

RESULTS

Out of the 335 articles screened, nine were included. Among these, three studies used dentin discs/roots from permanent human teeth; the rest combined them with stem cells. 10% CA for 5 or 10 minute was the most used protocol. Meanwhile, EDTA concentrations ranged from 10% to 17%. In eight studies examining the release of growth factors, five reported a significant release of transforming growth factor-β after dentin conditioning with 10% CA compared to 17% EDTA. Regarding cell behavior (6 studies), three studies assessed cell viability. The findings revealed that 10% CA conditioning showed cell viability similar to those of 17% EDTA. Additionally, in two out of three studies, it was observed that 10% CA conditioning did not affect cell morphology. The studies had a low risk of bias.

CONCLUSIONS

The use of 10% CA to condition dentin for 5-10 minutes resulted in a notable transforming growth factor -β1 release, but its cell responses were similar to those of EDTA.

Influence of ethylenediaminetetraacetic acid on regenerative endodontics: a systematic review

BACKGROUND

The effects of ethylenediaminetetraacetic acid (EDTA) on regenerative endodontic procedures (REPs) are controversial, because, despite releasing growth factors from dentine, some studies show negative effects on cell behaviour.

OBJECTIVES

To investigate the influence of the use of EDTA in REP on the growth factors' release, cell behaviour, and tissue regeneration.

METHODS

A systematic search was conducted (PubMed/Medline, Scopus, Cochrane Library, Web of Science, Embase, OpenGrey, and reference lists) up to February 2021. Only in vivo and in vitro studies evaluating the effects of EDTA on the biological factors of dentine, pulp/periapical tissues, and cell behaviour were eligible. Studies without a control group or available full text were excluded. The growth factors' release was the primary outcome. Risk of bias in the in vitro and in vivo studies was performed according to Joanna Briggs Institute's Checklist and SYRCLE's RoB tool, respectively.

RESULTS

Of the 1848 articles retrieved, 36 were selected. Among these, 32 were in vitro, three animal studies, and one with both models. The EDTA concentrations ranged from 3%-15%, at different times. Regarding growth factors' release (17 studies), 15 studies found significant transforming growth factor (TGF)-β release after dentine conditioning with EDTA, and most found no influence on vascular endothelial growth factor (VEGF) release. Regarding cell behaviour (26 studies), eight studies showed no influence of EDTA-treated dentine on cell viability; whereas, five, nine, and six studies showed higher cell migration, adhesion, and differentiation, respectively. No influence of EDTA conditioning was observed in animal studies. In vitro studies had a low risk of bias, whereas animal studies had high risk of bias. Meta-analysis was unfeasible.

DISCUSSION

This review found that EDTA increased TGF-β release and improved cell activity. However, well-designed histological analyses using immature teeth models are needed.

CONCLUSIONS

High quality in vitro evidence suggests that EDTA-treated dentine positively influences TGF-β release, cell migration, attachment, and differentiation; further research to evaluate its influence on tissue regeneration is necessary due to low methodological quality of the animal studies.

Comparison of Internal Adaptation of Bulk-fill and Increment-fill Resin Composite Materials

Objectives:

To evaluate 1) the internal adaptation of a light-activated incremental-fill and bulk-fill resin-based composite (RBC) materials by measuring the gap between the restorative material and the tooth structure and 2) the aging effect on internal adaptation.

Methods and Materials:

Seventy teeth with class I cavity preparations were randomly distributed into five groups; four groups were restored with bulk-fill RBCs: Tetric EvoCeram Bulk Fill (TEC), SonicFill (SF), QuiXX Posterior Restorative (QX), and X-tra fil (XF); the fifth group was restored with incremental-fill Filtek Supreme Ultra Universal Restorative (FSU). One-half of the specimens of each group were thermocycled. Each tooth was sectioned, digital images were recorded, and the dimensions of any existing gaps were measured. Data were analyzed using analysis of variance (α=0.05).

Results:

FSU had the smallest gap measurement values compared with the bulk-fill materials except QX and TEC (p≤0.008). FSU had the smallest sum of all gap category values compared with the bulk-fill materials, except QX (p≤0.021). The highest gap incidence and size values were found at the composite/adhesive interface. All aged groups had greater gap values in regard to the gap measurement and the sum of all gap categories compared with non-aged groups.

Significance:

The incrementally placed material FSU had the highest internal adaptation to the cavity surface, while the four bulk-fill materials showed varied results. Thermocycling influenced the existing gap area magnitudes. The findings suggest that the incremental-fill technique produces better internal adaptation than the bulk-fill technique.

Novel bioactive tetracycline-containing electrospun polymer fibers as a potential antibacterial dental implant coating

The purpose of this investigation was to determine the ability of tetracycline-containing fibers to inhibit biofilm formation of peri-implantitis-associated pathogens [i.e., Porphyromonas gingivalis (Pg), Fusobacterium nucleatum (Fn), Prevotella intermedia (Pi), and Aggregatibacter actinomycetemcomitans (Aa)]. Tetracycline hydrochloride (TCH) was added to a poly(DL-lactide) [PLA], poly(ε-caprolactone) [PCL], and gelatin [GEL] polymer blend solution at distinct concentrations to obtain the following fibers: PLA:PCL/GEL (TCH-free, control), PLA:PCL/GEL + 5 % TCH, PLA:PCL/GEL + 10 % TCH, and PLA:PCL/GEL + 25 % TCH. The inhibitory effect of TCH-containing fibers on biofilm formation was assessed by colony-forming units (CFU/mL). Qualitative analysis of biofilm inhibition was done via scanning electron microscopy (SEM). Statistical significance was reported at p < 0.05. Complete inhibition of biofilm formation on the fibers was observed in groups containing TCH at 10 and 25 wt%. Fibers containing TCH at 5 wt% demonstrated complete inhibition of Aa biofilm. Even though a marked reduction in CFU/mL was observed with an increase in TCH concentration, Pi proved to be the most resilient microorganism. SEM images revealed the absence of or a notable decrease in bacterial biofilm on the TCH-containing nanofibers. Collectively, our data suggest that tetracycline-containing fibers hold great potential as an antibacterial dental implant coating.

Bonding Ability of Paste-Paste Glass Ionomer Systems to Tooth Structure: In Vitro Studies

This study investigated the effect of nonrinse conditioners (ie, Ketac Nano Primer [KNP] and GC Self Conditioner [SC]) used as substrate pretreatment and their respective paste-paste resin-modified glass-ionomer cement (RMGIC) (ie, Ketac Nano [KN] and Fuji Filling LC [FF]) on microtensile bond strength to dentin and marginal sealing when compared with traditional RMGIC (ie, Photac Fil [PF] and Fuji II LC [FII]) used in association with polyacrylic acid (ie, Ketac Cavity Conditioner [KC] and GC Cavity Conditioner [CC]). A total of 192 extracted human molars were allocated into eight groups: KNP-KN, KC-KN, KNP-PF, KC-PF, SC-FF, CC-FF, SC-FII, and CC-FII. For microtensile bond strength, the teeth were sectioned to expose occlusal dentin and restored according to the group. After 24 hours the teeth were cut to yield nine beams per tooth (±0.8 mm2). Testing was done using a universal testing machine followed by failure mode classification. For microleakage testing, standardized cavity preparations were made on the buccal cementoenamel junction and restored according to the group. The teeth were thermocycled (500 cycles, 8°C to 48°C), sealed, immersed in methylene blue for 24 hours, and then assessed for microleakage using a stereomicroscope. Microtensile bond strengths in megapascals (mean±SE) were KNP-KN: 14.9 ± 1.6, KC-KN: 17.2 ± 1.5, KNP-PF: 31.2 ± 1.6, KC-PF: 26.2 ± 1.2, SC-FF: 23.6 ± 1.5, SC-FII: 31.2 ± 1.5, and CC-FII: 21.9 ± 1.5. Cervical margins showed more microleakage compared with occlusal margins. Overall, the use of nonrinse conditioners in association with traditional RMGICs demonstrated superior microtensile bond strengths to dentin when compared with the paste-paste RMGICs. Meanwhile, the association between polyacrylic acid (CC) and a traditional RMGIC (FII) led to the least microleakage for cervical locations when compared with all other groups.

Effect of Ceramic Etching Protocols on Resin Bond Strength to a Feldspar Ceramic

This study sought to evaluate the resin microtensile bond strength (MTBS) stability of a leucite-reinforced ceramic after different ceramic etching protocols. The microtensile test had 40 ceramic blocks (5×5×6 mm) assigned to five groups (n=8), in accordance with the following surface etching protocols: NE nonetched (control); 9HF: hydrofluoric (HF) acid etching (9%HF)+wash/dry; 4HF: 4%HF+wash/dry; 5HF: 5%HF+wash/dry; and 5HF+N: 5%HF+neutralizer+wash/dry+ultrasonic-cleaning. Etched ceramic surfaces were treated with a silane agent. Next, resin cement blocks were built on the prepared ceramic surface and stored for 24 hours in distilled water at 37°C. The specimens were then sectioned to obtain microtensile beams (32/block), which were randomly assigned to the following conditions, nonaged (immediate test) and aged (water storage for 150 days plus 12,000 thermal cycles), before the microtensile test. Bond strength data were submitted to one-way analysis of variance and Tukey test (α=0.05). Additional ceramic samples were subjected to the different ceramic etching protocols and evaluated using a scanning electron microscope (n=2) and atomic force microscopy (n=2). Aging led to a statistically significant decrease in the MTBS for all groups, except the untreated one (NE). Among the groups submitted to the same aging conditions, the untreated (NE) revealed inferior MTBS values compared to the 9HF and 4HF groups. The 5HF and 5HF+N groups had intermediate mean values, being statistically similar to the higher values presented by the 9HF and 4HF groups and to the lower value associated with the NE group. The neutralization procedure did not enhance the ceramic/resin cement bond strength. HF acid etching is a crucial step in resin/ceramic bonding.

Effect of Cleansing Methods on Saliva-Contaminated Zirconia—An Evaluation of Resin Bond Durability

The aims of this study were to investigate 1) the influence of cleansing methods after saliva contamination and 2) aging conditions (thermocycling and water storage) on zirconia shear bond strength (SBS) with a resin cement. One hundred and eighty zirconia specimens were sandblasted with 50 μm aluminum oxide particles, immersed in saliva for one minute (with the exception of the control group, [C]), and divided into groups according to the cleansing method, as follows: water rinse (W); 37% phosphoric acid gel (PA); cleaning paste (ie, Ivoclean®) containing mainly zirconium oxide (IC); and 70% isopropanol (AL). Scanning electron microscopy was done to qualitatively evaluate the zirconia surface after each cleansing method. For the SBS test, resin cement buttons were bonded to the specimens using a dedicated jig. SBS was evaluated according to standard protocols after 24 hours, 5000 thermal cycles (TC), or 150 days of water storage. Statistical analysis was performed using two-way analysis of variance and Tukey test (p&lt;0.05). Data showed a significant effect for the 150 days of water storage, TC, and 24 hours of water storage (150 days &lt; TC &lt; 24 hours). Group comparisons showed that PA &lt; AL and W &lt; IC and C. SBS ranged from 10.4 to 21.9 MPa (24 hours), from 6.4 to 14.8 MPa (TC), and from 2.9 to 7.0 MPa (150 days). Failure analysis revealed a greater percentage of mixed failures for the majority of the specimens and a smaller percentage of adhesive failures at the ceramic-resin cement interface. Our findings suggest that Ivoclean® was able to maintain adequate SBS values after TC and 150 days of storage, comparable to the uncontaminated zirconia.

Dental pulp stem cell responses to novel antibiotic-containing scaffolds for regenerative endodontics

AIM

To evaluate both the drug-release profile and the effects on human dental pulp stem cells' (hDPSC) proliferation and viability of novel bi-mix antibiotic-containing scaffolds intended for use as a drug delivery system for root canal disinfection prior to regenerative endodontics.

METHODOLOGY

Polydioxanone (PDS)-based fibrous scaffolds containing both metronidazole (MET) and ciprofloxacin (CIP) at selected ratios were synthesized via electrospinning. Fibre diameter was evaluated based on scanning electron microscopy (SEM) images. Pure PDS scaffolds and a saturated CIP/MET solution (i.e. 50 mg of each antibiotic in 1 mL) (hereafter referred to as DAP) served as both negative (nontoxic) and positive (toxic) controls, respectively. High-performance liquid chromatography (HPLC) was performed to investigate the amount of drug(s) released from the scaffolds. WST-1(®) proliferation assay was used to evaluate the effect of the scaffolds on cell proliferation. LIVE/DEAD(®) assay was used to qualitatively assess cell viability. Data obtained from drug release and proliferation assays were statistically analysed at the 5% significance level.

RESULTS

A burst release of CIP and MET was noted within the first 24 h, followed by a sustained maintenance of the drug(s) concentration for 14 days. A concentration-dependent trend was noticed upon hDPSCs' exposure to all CIP-containing scaffolds, where increasing the CIP concentration resulted in reduced cell proliferation (P < 0.05) and viability. In groups exposed to pure MET or pure PDS scaffolds, no changes in proliferation were observed.

CONCLUSIONS

Synthesized antibiotic-containing scaffolds had significantly lower effects on hDPSCs proliferation when compared to the saturated CIP/MET solution (DAP).

Doxycycline-encapsulated nanotube-modified dentin adhesives

This article presents details of fabrication, biological activity (i.e., anti-matrix metalloproteinase [anti-MMP] inhibition), cytocompatibility, and bonding characteristics to dentin of a unique doxycycline (DOX)-encapsulated halloysite nanotube (HNT)-modified adhesive. We tested the hypothesis that the release of DOX from the DOX-encapsulated nanotube-modified adhesive can effectively inhibit MMP activity. We incorporated nanotubes, encapsulated or not with DOX, into the adhesive resin of a commercially available bonding system (Scotchbond Multi-Purpose [SBMP]). The following groups were tested: unmodified SBMP (control), SBMP with nanotubes (HNT), and DOX-encapsulated nanotube-modified adhesive (HNT+DOX). Changes in degree of conversion (DC) and microtensile bond strength were evaluated. Cytotoxicity was examined on human dental pulp stem cells (hDPSCs). To prove the successful encapsulation of DOX within the adhesives-but, more important, to support the hypothesis that the HNT+DOX adhesive would release DOX at subantimicrobial levels-we tested the antimicrobial activity of synthesized adhesives and the DOX-containing eluates against Streptococcus mutans through agar diffusion assays. Anti-MMP properties were assessed via β-casein cleavage assays. Increasing curing times (10, 20, 40 sec) led to increased DC values. There were no statistically significant differences (p > .05) in DC within each increasing curing time between the modified adhesives compared to SBMP. No statistically significant differences in microtensile bond strength were noted. None of the adhesives eluates were cytotoxic to the human dental pulp stem cells. A significant growth inhibition of S. mutans by direct contact illustrates successful encapsulation of DOX into the experimental adhesive. More important, DOX-containing eluates promoted inhibition of MMP-1 activity when compared to the control. Collectively, our findings provide a solid background for further testing of encapsulated MMP inhibitors into the synthesis of therapeutic adhesives that may enhance the longevity of hybrid layers and the overall clinical performance of adhesively bonded resin composite restorations.

Tissue-engineering-based strategies for regenerative endodontics

Stemming from in vitro and in vivo pre-clinical and human models, tissue-engineering-based strategies continue to demonstrate great potential for the regeneration of the pulp-dentin complex, particularly in necrotic, immature permanent teeth. Nanofibrous scaffolds, which closely resemble the native extracellular matrix, have been successfully synthesized by various techniques, including but not limited to electrospinning. A common goal in scaffold synthesis has been the notion of promoting cell guidance through the careful design and use of a collection of biochemical and physical cues capable of governing and stimulating specific events at the cellular and tissue levels. The latest advances in processing technologies allow for the fabrication of scaffolds where selected bioactive molecules can be delivered locally, thus increasing the possibilities for clinical success. Though electrospun scaffolds have not yet been tested in vivo in either human or animal pulpless models in immature permanent teeth, recent studies have highlighted their regenerative potential both from an in vitro and in vivo (i.e., subcutaneous model) standpoint. Possible applications for these bioactive scaffolds continue to evolve, with significant prospects related to the regeneration of both dentin and pulp tissue and, more recently, to root canal disinfection. Nonetheless, no single implantable scaffold can consistently guide the coordinated growth and development of the multiple tissue types involved in the functional regeneration of the pulp-dentin complex. The purpose of this review is to provide a comprehensive perspective on the latest discoveries related to the use of scaffolds and/or stem cells in regenerative endodontics. The authors focused this review on bioactive nanofibrous scaffolds, injectable scaffolds and stem cells, and pre-clinical findings using stem-cell-based strategies. These topics are discussed in detail in an attempt to provide future direction and to shed light on their potential translation to clinical settings.

Impact of Quantity of Resin, C-factor, and Geometry on Resin Composite Polymerization Shrinkage Stress in Class V Restorations

Objective

This study evaluated the effect of quantity of resin composite, C-factor, and geometry in Class V restorations on shrinkage stress after bulk fill insertion of resin using two-dimensional finite element analysis.

Methods

An image of a buccolingual longitudinal plane in the middle of an upper first premolar and supporting tissues was used for modeling 10 groups: cylindrical cavity, erosion, and abfraction lesions with the same C-factor (1.57), a second cylindrical cavity and abfraction lesion with the same quantity of resin (QR) as the erosion lesion, and then all repeated with a bevel on the occlusal cavosurface angle. The 10 groups were imported into Ansys 13.0 for two-dimensional finite element analysis. The mesh was built with 30,000 triangle and square elements of 0.1 mm in length for all the models. All materials were considered isotropic, homogeneous, elastic, and linear, and the resin composite shrinkage was simulated by thermal analogy. The maximum principal (MPS) and von Mises stresses (VMS) were analyzed for comparing the behavior of the groups.

Results

Different values of angles for the cavosurface margin in enamel and dentin were obtained for all groups and the higher the angle, the lower the stress concentration. When the groups with the same C-factor and QR were compared, the erosion shape cavity showed the highest MPS and VMS values, and abfraction shape, the lowest. A cavosurface bevel decreased the stress values on the occlusal margin. The geometry factor overcame the effects of C-factor and QR in some situations.

Conclusion

Within the limitations of the current methodology, it is possible to conclude that the combination of all variables studied influences the stress, but the geometry is the most important factor to be considered by the operator.

Bioactive nanofibrous scaffolds for regenerative endodontics

Here we report the synthesis, materials characterization, antimicrobial capacity, and cytocompatibility of novel antibiotic-containing scaffolds. Metronidazole (MET) or Ciprofloxacin/(CIP) was mixed with a polydioxanone (PDS)polymer solution at 5 and 25 wt% and processed into fibers. PDS fibers served as a control. Scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), tensile testing, and high-performance liquid chromatography (HPLC) were used to assess fiber morphology, chemical structure, mechanical properties, and drug release, respectively. Antimicrobial properties were evaluated against those of Porphyromonas gingivalis/Pg and Enterococcus faecalis/Ef. Cytotoxicity was assessed in human dental pulp stem cells (hDPSCs). Statistics were performed, and significance was set at the 5% level. SEM imaging revealed a submicron fiber diameter. FTIR confirmed antibiotic incorporation. The tensile values of hydrated 25 wt% CIP scaffold were significantly lower than those of all other groups. Analysis of HPLC data confirmed gradual, sustained drug release from the scaffolds over 48 hrs. CIP-containing scaffolds significantly (p < .00001) inhibited biofilm growth of both bacteria. Conversely, MET-containing scaffolds inhibited only Pg growth. Agar diffusion confirmed the antimicrobial properties against specific bacteria for the antibiotic-containing scaffolds. Only the 25 wt% CIP-containing scaffolds were cytotoxic. Collectively, this study suggests that polymer-based antibiotic-containing electrospun scaffolds could function as a biologically safe antimicrobial drug delivery system for regenerative endodontics.

Carcinoma-associated fibroblasts activate progesterone receptors and induce hormone independent mammary tumor growth: A role for the FGF-2/FGFR-2 axis

The mechanisms by which mammary carcinomas acquire hormone independence are still unknown. To study the role of cancer-associated fibroblasts (CAF) in the acquisition of hormone-independence we used a hormone-dependent (HD) mouse mammary tumor and its hormone-independent (HI) variant, which grows in vivo without hormone supply. HI tumors express higher levels of FGFR-2 than HD tumors. In spite of their in vivo differences, both tumors have the same hormone requirement in primary cultures. We demonstrated that CAF from HI tumors (CAF-HI) growing in vitro, express higher levels of FGF-2 than HD counterparts (CAF-HD). FGF-2 activated the progesterone receptors (PR) in the tumor cells, thus increasing cell proliferation in both HI and HD tumors. CAF-HI induced a higher proliferative rate on the tumor cells and in PR activation than CAF-HD. The blockage of FGF-2 in the co-cultures or the genetic or pharmacological inhibition of FGFR-2 inhibited PR activation and tumor cell proliferation. Moreover, in vivo, the FGFR inhibitor decreased C4-HI tumor growth, whereas FGF-2 was able to stimulate C4-HD tumor growth as MPA. T47D human breast cancer cells were also stimulated by progestins, FGF-2 or CAF-HI, and this stimulation was abrogated by antiprogestins, suggesting that the murine C4-HI cells respond as the human T47D cells. In summary, this is the first study reporting differences between CAF from HD and HI tumors suggesting that CAF-HI actively participate in driving HI tumor growth.

Glutamate induces apoptosis in anterior pituitary cells through group II metabotropic glutamate receptor activation

Glutamate can induce neuronal cell death by activating ionotropic glutamate receptors (iGluRs) as well as metabotropic glutamate receptors (mGluRs). In the present study, we investigated whether glutamate induces apoptosis of cultured anterior pituitary cells from female rats. Glutamate (1 mm) significantly reduced the metabolic activity of viable cells and increased the percentage of terminal deoxynucleotidyl transferase-mediated deoxyuridine triphosphate nick-end labeling (TUNEL)-positive cells and caspase-3 activity in anterior pituitary cells. The inhibitory effect of glutamate on the viability of anterior pituitary cells was not observed in the presence of [2S]-alpha-ethylglutamic acid (0.75 mm), a specific group II mGluR antagonist. Also, (2S,1'S,2'S)-2-(carboxycyclopropyl)glycine (LCCG-I; 0.75 mm), a specific group II mGluR agonist, reduced viability and increased the percentage of TUNEL-positive anterior pituitary cells. Group I and III mGluRs and iGluRs agonists failed to modify the metabolic activity of anterior pituitary cells. Glutamate and LCCG-I increased the percentage of TUNEL-positive lactotropes and somatotropes. The subunit mGluR2/3, belonging to group II mGluR, was localized in these cell types. Glutamate increased nitric oxide (NO) synthase (NOS) activity and inducible NOS expression in anterior pituitary cells. N-methyl-l-arginine (NMMA, 0.5 mm), a NOS inhibitor, potentiated the apoptotic effect of glutamate in anterior pituitary cells, indicating that NO may restrain glutamate-induced apoptosis. Incubation of anterior pituitary cells with a cAMP analog (N6, 2'-o-dibutyryladenosine 3', 5'-cyclic monophosphate; 1 mm) attenuated the apoptosis induced by glutamate. Glutamate and LCCG-I decreased prolactin release from anterior pituitary cells. N6, 2'-o-dibutyryladenosine 3', 5'-cyclic monophosphate reversed the inhibitory effect of glutamate on prolactin release, but NMMA failed to modify it. Our data show that glutamate induces apoptosis of lactotropes and somatotropes through group II mGluR activation, probably by decreasing cAMP synthesis.

The effect of D-aspartate on luteinizing hormone-releasing hormone, alpha-melanocyte-stimulating hormone, GABA and dopamine release

Since D-aspartate stimulates prolactin and LH release, our objective was to determine whether D-aspartate modifies the release of hypothalamic and posterior pituitary factors involved in the control of their secretion and whether its effects on these tissues are exerted through NMDA receptors and mediated by nitric oxide. In the hypothalamus, D-aspartate stimulated luteinizing hormone-releasing hormone (LHRH), alpha-melanocyte-stimulating hormone (alpha-MSH) and GABA release and inhibited dopamine release through interaction with NMDA receptors. It increased nitric oxide synthase (NOS) activity, and its effects on LHRH and hypothalamic GABA release were blunted when NOS was inhibited. In the posterior pituitary gland, D-aspartate inhibited GABA release but had no effect on dopamine or alpha-MSH release. We report that D-aspartate differentially affects the release of hypothalamic and posterior pituitary factors involved in the regulation of pituitary hormone secretion.