Enhanced degradation of sulfamethoxazole by a modified nano zero-valent iron with a β-cyclodextrin polymer: Mechanism and toxicity evaluation

Rising concern about emerging and already persisting pollutants in water has urged the scientific community to develop novel remedial techniques. A new group of remediation methods is based on the modification of nanoscale zero-valent iron particles (nZVI), which are well known for treating volatile organic compounds and heavy metals. The properties of nZVI may be further enhanced by modifying their structure or surface using "green" polymers. Herein, nZVI was modified by a β-cyclodextrin polymer (β-CDP), which is considered an environmentally safe and inexpensive adsorbent of contaminants. This composite was used for the first time for the degradation of sulfamethoxazole (SMX). Coating by β-CDP not only enhanced the degradation of SMX (>95%, under 10 min) by the nanoparticles in a wide pH range (3-9) and enabled their efficient reusability (for three cycles) but also made the coated nZVI less toxic to the model bioindicator microalga Raphidocelis subcapitata. Moreover, degradation products of SMX were found to be less toxic to Escherichia coli bacteria and R. subcapitata microalga, contrary to the SMX antibiotic itself, indicating a simple and eco-friendly cleaning process. This research aims to further stimulate and develop novel remedial techniques based on nZVI, and provides a potential application in the degradation of antibiotics in a wide pH range. Moreover, the wealth of available cyclodextrin materials used for surface modification may open a way to discover more efficient and attractive composites for environmental applications.

Selectivity of 1-O-Propargyl-d-Mannose Preparations

Thanks to their ability to bind to specific biological receptors, mannosylated structures are examined in biomedical applications. One of the most common ways of linking a functional moiety to a structure is to use an azide-alkyne click reaction. Therefore, it is necessary to prepare and isolate a propargylated mannose derivative of high purity to maintain its bioactivity. Three known preparations of propargyl-α-mannopyranoside were revisited, and products were analysed by NMR spectroscopy. The preparations were shown to yield by-products that have not been described in the literature yet. Our experiments showed that one-step procedures could not provide pure propargyl-α-mannopyranoside, while a three-step procedure yielded the desired compound of high purity.

Lipidomic analysis of diatoms cultivated with silica nanoparticles

Polar lipids from the diatoms Diadesmis gallica and Navicula atomus were separated and their structures were determined using high resolution tandem MS HILIC-LC/ESI. This method allowed us to identify 34 classes of lipids, each containing dozens of molecular species, including regioisomers. The largest differences were found in two sulfur-containing lipids, sulfoquinovosyldiacylglycerol and phosphatidylsulfocholine caused probably by the remodeling of lipid species. These diatoms have been found to use several mechanisms to resolve growth in extreme environments, i.e. silica starvation. The presence of insoluble nano-SiO₂ leads to the replacement of cellular phospholipids with sulfolipids. Regioisomer ratios also vary depending on the concentration of nano-SiO₂ in the culture medium, i.e. the biosynthesis of polar lipids via the prokaryotic (plastidial) and/or eukaryotic (explastidial) pathways. Complex analyses of polar lipids using high resolution HILIC-LC/ESI-tandem, as used for diatoms, can also be used for other photosynthetic microorganisms.

(1S,2S)-Cyclohexane-1,2-diamine-based Organosilane Fibres as a Powerful Tool Against Pathogenic Bacteria

An urgent need to find an effective solution to bacterial resistance is pushing worldwide research for highly effective means against this threat. Newly prepared hybrid organosilane fibres consisting of a (1S,2S)-cyclohexane-1,2-diamine derivative, interconnected in the fibre network via covalent bonds, were fully characterised via different techniques, including FTIR, TGA-FTIR, SEM-EDS, and solid-state NMR. Fibrous samples were successfully tested against two types of pathogenic bacterial strains, namely Staphylococcus aureus, and Pseudomonas aeruginosa. The obtained results, showing >99.9% inhibition against Staphylococcus aureus and Pseudomonas aeruginosa in direct contact compared to the control, may help particularly in case of infections, where there is an urgent need to treat the infection in direct contact. From this point of view, the above-mentioned fibrous material may find application in wound healing. Moreover, this new material has a positive impact on fibroblasts viability.

Cyclodextrin-Polypyrrole Coatings of Scaffolds for Tissue Engineering

Polypyrrole is one of the most investigated conductive polymers used for tissue engineering applications because of its advantageous properties and the ability to promote different cell types' adhesion and proliferation. Together with β-cyclodextrin, which is capable of accommodating helpful biomolecules in its cavity, it would make a perfect couple for use as a scaffold for tissue engineering. Such scaffolds were prepared by the polymerisation of 6-(pyrrol-3-yl)hexanoic acid on polycaprolactone microfibres with subsequent attachment of β-cyclodextrin on the polypyrrole layer. The materials were deeply characterised by several physical and spectroscopic techniques. Testing of the cyclodextrin enriched composite scaffold revealed its better performance in in vitro experiments compared with pristine polycaprolactone or polypyrrole covered polycaprolactone scaffolds.

The effect of lanthanides on photosynthesis, growth, and chlorophyll profile of the green alga Desmodesmus quadricauda

Lanthanides (La, Gd, Nd, Ce) accumulated in the green alga Desmodesmus quadricauda but their intracellular localizations were distinctly different: lanthanum and gadolinium were localized in cytoplasm, while neodymium and cerium were in the chloroplast. The effect of lanthanum and neodymium, as representatives of these two groups, on growth, chlorophyll content and photosynthetic rate at different light intensities was studied. At the lowest light intensity used (50 µmol photons m^-2 s^-1), in the presence of lanthanides (Nd), growth was enhanced by as much as 36 % over lanthanide free control, and the photosynthetic rate increased by up to 300 %. At high light intensities (238, 460, and 750 µmol photons m^-2 s^-1), photosynthetic rate increased markedly, but there was no significant difference between rates in the presence or absence of lanthanides. However, growth, measured as a percentage of dry weight, if compared with lanthanide free control, increased at all light intensities (31, 39, and 20 %, respectively). The total amount of chlorophyll after lanthanide treatment increased by up to 21 % relative to the control culture, mainly due to an increase in the level of chlorophyll b. Addition of lanthanides caused a change in the chlorophyll a/b ratio from 4.583 in control cultivation, to 1.05. Possible mechanisms of lanthanide-induced photosynthetic change, alterations in photosynthetic structures, and increases in growth are discussed and compared with findings in higher plants. The hypothesis that the lanthanide effect could be due to formation of lanthanide-pheophytins was not confirmed as lanthanide pheophytins were not found in D. quadricauda. Furthermore, we have shown that the preferential incorporation of heavy isotopes of magnesium, namely ²⁵Mg and ²⁶Mg, into chlorophyll during photosynthesis that occurred in controls was diminished in the presence of lanthanides.

Anion recognition in water by a rotaxane containing a secondary rim functionalised cyclodextrin stoppered axle

The synthesis of a water soluble [2]rotaxane is reported using hydrophilic secondary rim functionalised permethylated β-cyclodextrin derivatives as the axle stopper groups. The rotaxane recognises halide anions in pure water with impressive selectivity over sulfate.