Electrospun TiO2-GO/PAN-CA nanofiber mats: A novel material for remediation of organic contaminants and nitrophenol reduction

The outstanding properties of nanofiber composites have made them a popular choice for various structural applications. Recently, there has been a growing interest in using electrospun nanofibers as reinforcement agents, which possess exceptional properties that can enhance the performance of these composites. Herein, TiO2-graphene oxide (GO) nanocomposite incorporated into polyacrylonitrile (PAN)/cellulose acetate (CA) nanofibers were fabricated by an effortless electrospinning technique. The chemical and structural characteristics of the resulting electrospun TiO2-GO nanofibers were examined employing diverse techniques such as XRD, FTIR, XPS, TGA, mechanical properties, and FESEM. Remediation of organic contaminants and organic transformation reactions with electrospun TiO2-GO nanofibers were performed. The results indicated that the incorporation of TiO2-GO with various TiO2/GO ratios did not affect the molecular structure of PAN-CA. Still, they did significantly increase the mean fiber diameter (234-467 nm) and the mechanical properties of the nanofibers comprising UTS, elongation, Young's modulus, and toughness compared to PAN-CA. From various ratios of TiO2/GO (0.01TiO2/0.005GO and 0.005TiO2/0.01GO) in the electrospun NFs, the nanofiber containing a high content of TiO2 showed over 97% of the initial MB dyes were degraded after 120 min of visible light exposure and the same nanofibers also, achieved 96% nitrophenol conversion to aminophenol in just 10 min with activity factor kAF value of 47.7 g-1min-1. These findings illustrate the promise of TiO2-GO/PAN-CA nanofibers for use in various structural applications, particularly in the remediation of organic contaminants from water and organic transformation reactions.

Controllable Fabrication of Zn2+ Self-Doped TiO2 Tubular Nanocomposite for Highly Efficient Water Treatment

Tailoring high-efficiency photocatalytic composites for various implementations is a major research topic. 1D TNTs-based nanomaterials show promise as a photocatalyst for the remediation of organic pigments in an aqueous solution. Despite this, TiO2 (TNTs) is only photoactive in the UV range due to its inherent restriction on absorption of light in the UV range. Herein, we provide a facile recipe to tailor the optical characteristics and photocatalytic activity of TNTs by incorporating Zn (II) ionic species via an ion-exchange approach in an aqueous solution. The inclusion of Zn (II) ions into the TNTs framework expands its absorption of light toward the visible light range, therefore TiO2 nanotubes shows the visible-light photo-performance. Activity performance on photocatalytic decontamination of RhB at ambient temperature demonstrates that Zn-TNTs offer considerable boosted catalytic performance compared with untreated tubular TiO2 during the illumination of visible light. RhB (10 mg L−1) degradation of around 95% was achieved at 120 min. Radical scavenger experiment demonstrated that when electron (e−) or holes (h+) scavengers are introduced to the photodegradation process, the assessment of decontamination efficacy decreased by 45% and 76%, respectively. This demonstrates a more efficient engagement of the photoexcited electrons over photogenerated holes in the photodegradation mechanism. Furthermore, there seems to be no significant decrease in the activity of the Zn-TNTs after five consecutive runs. As a result, the fabricated Zn-TNTs composite has a high economic potential in the energy and environmental domains.

Valuation of rice straw residues: Production of silylated methylcellulose containing propylamine and propylethylenediamine for use as anticorrosion and antibacterial

Green technology is a scientific movement seeking to eliminate industrial chemicals and replace them with natural products by valorizing natural resources or biological waste. In this work, we present the extraction of cellulose from rice straw and chemically modified water-dispersible cellulose (methylcellulose) by performing a methylation process. The methylcellulose is chemically bonded to N-[3-(trimethoxysilyl)propyl]ethylenediamine, and (3-aminopropyl)triethoxysilane compounds to produce a cellulose-organosilane hybrid. The prepared compounds were studied with appropriate techniques such as ¹H NMR, XRD, FTIR, TGA, Raman spectroscopy, FE-SEM, and AFM. The prepared materials were used as corrosion inhibitors of steel in 1 N H₂SO₄ for studies of potentiodynamic polarization measurements and electrochemical impedance spectroscopy. The materials were also studied as antibacterial agents. The results indicate the successful use of a modified extracted cellulose hybrid in the corrosion field and as an antibacterial agent. Quantum chemical assessments based on density functional theory (DFT) of the trimethoxysilyl propylamine and dimethoxymethylsilyl propylethylenediamine grafted methylcellulose were calculated. The results obtained showed the agreement of the theoretical data with the experimental data.

Improving heavy oil recovery, part (I): synthesis and surface activity evaluation of some novel organometallic surfactants based on salen-M complexes

This study focuses on preparing a new family of organometallic surfactants based on five ion complexes, namely Co²⁺, Ni²⁺, Cu²⁺, Fe³⁺, and Mn²⁺. The first step is the preparation of 5-chloromethyl salicylaldehyde (Salen, S). The second step is the formation of sodium alkoxide of Pluronic F-127 (AP). The third step is the formation of the modified AP–Salen (new ligand). This ligand was reacted with the metal chlorides as mentioned earlier to obtain the organometallic surfactants (OMS) named AP–Salen–M complexes. FT-IR, ¹H-NMR, SEM, and EDX justified the chemical structure of the as-prepared materials. The surface tension of these surfactants was measured for surfactant solutions at different concentrations to determine the CMC and calculate their surface–active properties. The interfacial tension at CMC was measured against heavy crude oil to predict the availability and use these surfactants in the enhanced oil recovery (EOR) process. From the results, this class of surfactants exhibited good surface–active properties and high efficiency on the interface adsorption; besides, they reduced the interfacial tension in the order between 10⁻¹ and 10⁻² mN m⁻¹, which gives a good indication to use these surfactants in EOR application for the heavy crude oil.

This study focuses on preparing a new family of organometallic surfactants based on five ion complexes, namely Co²⁺, Ni²⁺, Cu²⁺, Fe³⁺, and Mn²⁺.

Polyvinylpyrrolidone-Aminopropyl-SBA-15 schiff Base hybrid for efficient removal of divalent heavy metal cations from wastewater

The mesoporous silica-polymer hybrid was prepared as an adsorbent for divalent heavy metals (Pb(II), Ni(II), and Cu (II)) from rice husk and polyvinylpyrrolidone (PVP) through three successive steps. The first is the preparation of the mesoporous silica (SBA-15), the second is grafting 3-aminopropyltrimethoxysilane on SBA-15, and the following step is the formation of Schiff base (PVP-SBA-15) between amine end-capped silica and PVP moieties. The materials were characterized by different techniques, including FTIR, low and wide-angle XRD, N₂-adsorption, and HR-TEM. The NH₂-SBA-15 displayed a moderate affinity toward heavy element ions under study. Grafting of PVP moieties introduces a high affinity toward heavy metal ions, and the adsorption is a well-fitted Langmuir adsorption model. A series of experiment adsorption equilibrium reported with SBA-15, NH₂-SBA-15, and PVP-SBA-15, which showed an adsorption capacity of 128 mg/g (Cu (II)), 175 mg/g (Pb (II)) and 72 mg/g for Ni(II). Kinetic studies have shown that the best way to describe the adsorption process of heavy metals is pseudo-first-order. The value of ΔG°, ΔH°, and ΔS° demonstrated that the adsorption of heavy metals on the PVP-SBA-15 was endothermic in nature and spontaneous. These results exhibited that PVP-SBA-15 material has considerable competence in eliminating heavy metals from wastewater.

Photocatalytic degradation of malachite green dye using chitosan supported ZnO and Ce-ZnO nano-flowers under visible light

Two types of chitosan-based composites (chitosan/ZnO and chitosan/Ce-ZnO composites) were synthesized under microwave irradiation and characterized as advanced catalysts of enhanced photocatalytic activity under the visible light. The morphological investigation reflected the formation of ZnO and Ce doped ZnO at stunning micro flowers of nano limps. Additionally, the optical studies reflected a reduction in the bandgap of ZnO from 3.3 eV to 2.85 eV and 2.5 eV after supporting it onto chitosan chains and after doping it with cerium, respectively. The synthetic composites were applied in photocatalytic removal of malachite green dye under a visible light source. The synthetic CH/ZnO and CH/Ce-ZnO showed enhancement in the photocatalytic removal of M.G by 54% and 87%, respectively, as compared to the pure ZnO. The synthetic composites are of high stability and can be reused for five photocatalytic degradation cycles at stunning removal percentages. The main oxidizing radicals during the removal of M.G by CH/ZnO are the generated electron-hole pairs as well as the hydroxyl radicals. The effective species in CH/Ce-ZnO photocatalytic system are the photogenerated hydroxyl radicals followed by the electron-hole pairs.

Ni-doped and Ni/Cr co-doped TiO2 nanotubes for enhancement of photocatalytic degradation of methylene blue

Ni-doped and Ni/Cr co-doped TiO₂ nanotubes were successfully synthesized using a novel hydrothermal method. The surface and bulk properties of as-synthesized nanopowders were characterized using various microstructural and optical techniques. The photocatalytic ability of these nanopowders was investigated systematically for the decomposition of methylene blue dye (MB) under visible light illumination. The morphological results revealed the structural transformation of TiO₂ nanotubes to nanosheets, and further to a mixture of nanosheet/nanotube on doping with Ni and co-doping of Ni/Cr, respectively. Moreover, the Ni doping causes an optical absorption edge shifts towards lower wavelengths, while doping by Ni/Cr results to an optical absorption edge shifts towards higher wavelength in comparison to TiO₂-nanotubes. Also, Ni-doping and Ni/Cr co-doping strongly affects the Raman vibrational modes owing to the changes in interplanar distance, crystallite size, dislocation density, and crystal microstrains. Among the undoped, doped and co-doped TiO₂ nanoparticles, the 6Ni/4Cr co-doped TiO₂ exhibited a higher efficiency of 95.6% and excellent stability towards the photocatalytic degradation of MB. It is attributed to the availability of many carriers for the efficient photo-oxidation within the UV-Vis optical absorption range. Also, the photocatalytic reaction kinetics and degradation mechanism of MB were discussed.

Oxidation of p-toluic acid to terephthalic acid via a bromine-free process using nano manganese and manganese–copper mixed oxides

Challenges and technological opportunities for nano-mixed oxide (Cu–Mn) allowing a green route to valued terephthalic acid production from p-xylene.