Reactive layered hydroxide membrane for advanced water treatment: Micropollutant degradation and antifouling potential

The effective removal of micropollutants by water treatment technologies remains a significant challenge. Herein, we develop a CoFe layered double hydroxide (CoFeLDH) catalytic membrane for peroxymonosulfate (PMS) activation to achieve efficient micropollutant removal with improved mass transfer rate and reaction kinetics. This study found that the CoFeLDH membrane/PMS system achieved an impressive above 98% degradation of the probe chemical ranitidine at 0.1 mM of PMS including five more micropollutants (Sulfamethoxazole, Ciprofloxacin, Carbamazepine, Acetaminophen and Bisphenol A) at satisfactory level (above 80%). Moreover, significant improvements in water flux and antifouling properties were observed, marking the membrane as a specific advancement in the removal of membrane fouling in water purification technology. The membrane demonstrated consistent degradation efficiency for several micropollutants and across a range of pH (4 to 9) as well as different anionic environments, thereby showing it suitability for scale-up application. The key role of reactive species such as SO4•-, and O2•- radicals in the degradation process was elucidated. This is followed by the confirmation of the occurrence of redox cycling between Co and Fe, and the presence of CoOH+ that promotes PMS activation. Over the ten cycles, the membrane could be operated with a flux recovery of up to 99.8% and maintained efficient performance over 24 h continuous operation. Finally, the efficiency in degrading micropollutants, coupled with reduced metal leaching, makes the CoFeLDH membrane as a promising technology for application in water treatment.

Progress in layered double hydroxides (LDHs): Synthesis and application in adsorption, catalysis and photoreduction

Layered double hydroxides (LDHs), also known as anionic clays, have attracted significant attention in energy and environmental applications due to their exceptional physicochemical properties. These materials possess a unique structure with surface hydroxyl groups, tunable properties, and high stability, making them highly desirable. In this review, the synthesis and functionalization of LDHs have been explored including co-precipitation and hydrothermal methods. Furthermore, extensive research on LDH application in toxic pollutant removal has shown that modifying or functionalizing LDHs using materials such as activated carbon, polymers, and inorganics is crucial for achieving efficient pollutant adsorption, improved cyclic performance, as well as effective catalytic oxidation of organics and photoreduction. This study offers a comprehensive overview of the progress made in the field of LDHs and LDH-based composites for water and wastewater treatment. It critically discusses and explains both direct and indirect synthesis and modification techniques, highlighting their advantages and disadvantages. Additionally, this review critically discusses and explains the potential of LDH-based composites as absorbents. Importantly, it focuses on the capability of LDH and LDH-based composites in heterogeneous catalysis, including the Fenton reaction, Fenton-like reactions, photocatalysis, and photoreduction, for the removal of organic dyes, organic micropollutants, and heavy metals. The mechanisms involved in pollutant removal, such as adsorption, electrostatic interaction, complexation, and degradation, are thoroughly explained. Finally, this study outlines future research directions in the field.

Boosting Hydroxyl Radical Yield via Synergistic Activation of Electrogenerated HOCl/H2O2 in Electro-Fenton-like Degradation of Contaminants under Chloride Conditions

Hydroxyl radical production via catalytic activation of HOCl is a new type of Fenton-like process. However, metal-chlorocomplex formation under high chloride conditions could deactivate the catalyst and reduce the process efficiency. Herein, in situ electrogenerated HOCl was activated to •OH via a metal-free, B/N-codoped carbon nanofiber cathode for the first time to degrade contaminant under high chloride condition. The results show 98% degradation of rhodamine B (RhB) within 120 min (k = 0.036 min-1) under sulfate conditions, while complete degradation (k = 0.188 min-1) was obtained in only 30 min under chloride conditions. An enhanced degradation mechanism consists of an Adsorb & Shuttle process, wherein adsorption concentrates the pollutants at the cathode surface and they are subsequently oxidized by the large amount of •OH produced via activation of HOCl and H2O2 at the cathode. Density functional theory calculations verify the pyridinic N as the active site for the activation of HOCl and H2O2. The process efficiency was also evaluated by treating tetracycline and bisphenol A as well as high chloride-containing real secondary effluents from a pesticide manufacturing plant. High yields of •OH and HOCl allow continuous regeneration of the cathode for several cycles, limiting its fast deactivation, which is promising for real application.

Membrane-based nanoconfined heterogeneous catalysis for water purification: A critical review✰

Progress in heterogeneous advanced oxidation processes (AOPs) is hampered by several issues including mass transfer limitation, limited diffusion of short-lived reactive oxygen species (ROS), aggregation of nanocatalysts, and loss of nanocatalysts to treated water. These issues have been addressed in recent studies by executing the heterogeneous AOPs in confinement, especially in the nanopores of catalytic membranes. Under nanoconfinement (preferably at the length of less than 25 nm), the oxidant-nanocatalyst interaction, ROS-micropollutant interaction and diffusion of ROS have been observed to significantly improve, which results in enhanced ROS yield and mass transfer, improved reaction kinetics and reduced matrix effect as compared to conventional heterogenous AOP configuration. Given the significance of nanoconfinement effect, this study presents a critical review of the current status of membrane-based nanoconfined heterogeneous catalysis system for the first time. A succinct overview of the nanoconfinement concept in the context of membrane-based nanofluidic platforms is provided to elucidate the theoretical and experimental findings related to reaction kinetics, reaction mechanisms and molecule transport in membrane-based nanoconfined AOPs vs. conventional AOPs. In addition, strategies to construct membrane-based nanoconfined catalytic systems are explained along with conflicting arguments/opinions, which provides critical information on the viability of these strategies and future research directions. To show the desirability and applicability of membrane-based nanoconfined catalysis systems, performance governing factors including operating conditions and water matrix effect are particularly focused. Finally, this review presents a systematic account of the opportunities and technological constraints in the development of membrane-based nanoconfined catalytic platform to realize effective micropollutant elimination in water treatment.

Spontaneous intra-electron transfer within rGO@Fe2O3-MnO catalyst promotes long-term NOx reduction at ambient conditions

Iron (Fe)-based catalysts are widely used for taming nitrogen oxides (NO_x) containing flue gas, but the regeneration and long-term reusability remains a concern. The reusability can be acquired by external additives, and resultantly can not only increase the cost but can also add to process complexity as well as secondary pollutants. Herein, a self-sustainable material is designed to regenerate the catalyst for long-term reusability without adding to process complexity. The catalyst is based on reduced graphene-oxide impregnated by Fe₂O₃-MnO (rGO@Fe₂O₃-MnO; G-F-M) for spontaneous intra electron (e^-)-transfer from Mn to Fe. The developed catalyst; G-M-F exhibited 93.7% NO_x reduction, which suggests its high catalytic activity. The morphological and structure characterizations confirmed the Fe/Mn loading, contributing to e^--transfer between Mn and Fe due to its conductivity. The synthesized G-F-M showed higher NO_x reduction about 2.5 folds, than rGO@Fe₂O₃ (G-FeO) and rGO@MnO_x (G-MnO_x). The performance of G-M-F without and with an electrochemical system was also compared, and the difference was only 5%, which is an evidence of the spontaneous e^- transfer between the Mn and Fe-NO_x complex. The designed catalyst can be used for a long time without external assistance, and its efficiency was not affected significantly (<3.7%) in the presence of high oxygen contents (8%). The as-prepared G-M-F catalyst has great potential for executing a dual role NOx removal and self-regeneration of catalyst (SRC), promoting a sustainable remediation approach for large-scale applications.

Separation of Fe from wastewater and its use for NOx reduction; a sustainable approach for environmental remediation

The nitrogen and sulphur oxide (NO_x and SO₂) emissions are causing a serious threat to the existence of life on earth, requiring their effective removal for a sustainable future. Among various approaches, catalytic or electrochemical reduction of air pollutants (NO_x) has gained much attention due to its high efficiency and the possibility of converting these gases into valuable products. However, the required catalysts are generally synthesized from lab-grade chemicals, which may not be a sustainable approach. Herein, a sustainable approach is presented to synthesize an efficient iron-based catalyst directly from industrial/lake wastewater (WW) for NO_x-reduction. According to the theoretical calculations and experimental results, Fe-ions could be readily recovered from wastewater because it has the best adsorption efficiency among all other co-existing metals (Ni²⁺, Cd²⁺, Co²⁺, Cu²⁺, and Cr⁶⁺). The subsequent experimental investigations confirmed the preferential Fe adsorption from different WW streams to develop Fe₃O₄@EDTA-Fe composite, whereby Fe₃O₄ could be used due to its high recycling ability, and ethylenediaminetetraacetic acid (EDTA) acted as a chelating agent to adsorb Fe-metal from effluents. The Fe₃O₄@EDTA-Fe exhibited high efficiency (≥87%) for NO_x reduction even in the presence of high-degree oxygen contents (10-12%). Moreover, Fe₃O₄-EDTA-Fe showed excellent long-term stability for 24 h and maintained more than 80% NO_x reduction. The fabricated catalyst has a great potential for executing a dual role simultaneously for Fe-recovery and NO_x removal, promoting the circular economy concept and providing a potentially sustainable remediation approach for large-scale applications.

Gravity-driven layered double hydroxide nanosheet membrane activated peroxymonosulfate system for micropollutant degradation

For the first time in this study, CoAl-layered double hydroxide nanosheet membrane (LDH_m) with abundant active sites was fabricated for peroxymonosulfate (PMS) activation with the mindset to catalytically degrade micropollutants. Depending on the catalyst loading, the developed LDH_m can be driven under gravity at a permeate flux of approximately 80 L/m² h and 210 L/m² h at LDH loading of 0.80 mg/cm² and 0.08 mg/cm², respectively. Notably, the LDH_m (0.63 mg) exhibited excellent PMS activation efficiency as indicated by 87.8% removal of the probe chemical (ranitidine) at 0.2 mM PMS, which was higher than that (37-44%) achieved by conventional LDH (5-20 mg)/PMS (0.2 mM) system. In addition to efficient degradation of several micropollutants, LDH_m/PMS performance was not inhibited by variation in solution pH (4-8) as well as during long-term (29 h) continuous-flow operation. SO₄^•- and ¹O₂ were identified as the primary reactive species in the LDH_m/PMS system, while both Co and Al participated in PMS activation. This study offers a simple strategy for efficient removal of several micropollutants with significantly reduced catalyst leaching, which could be applied sustainably in water treatment.

Acid mine drainage and sewage impacted groundwater treatment by membrane distillation: Organic micropollutant and metal removal and membrane fouling

Groundwater is the dominant source of freshwater in many countries around the globe, and the deterioration in its quality by contaminants originating from anthropogenic sources raises serious concern. In this study, a scenario where groundwater is contaminated by acid mine drainage (AMD) from mining activities and/or sewage was envisaged, and the performance of a direct contact membrane distillation (DCMD) system was investigated comprehensively for different compositions of the AMD- and sewage-impacted groundwater. Regardless of the composition, MD membrane achieved 98-100% removal of metals and bulk organics, while the removal of the selected micropollutants ranged between 80 and 100%. Effective retention of contaminants by the MD led to their accumulation over time, which affected the hydraulic performance of the MD membrane by reducing the permeate flux by 29-76%. When persulfate (PS)-mediated oxidation process was integrated with the DCMD, degradation of bulk organics (50-71%) and micropollutants (50-100%) by PS reduced their accumulation. Characterisation of the fouling layer revealed the occurrence of membrane scaling that was mainly due to the deposition of iron oxide or oxyhydroxide precipitates. For an identical composition of the AMD- and sewage-impacted groundwater, flux decline was 10% less in PS-assisted DCMD as compared to that in the standalone DCMD. However, this did not prevent the formation of iron oxide scales on MD membrane during the operation of PS-assisted DCMD. This study demonstrates the long-term performance of a standalone and PS-assisted DCMD operated in continuous-flow mode to treat AMD- and sewage-impacted groundwater for the first time.

Determining the leading sources of N-nitrosamines and dissolved organic matter in four reservoirs in Southern China

The presence of carcinogenic N-nitrosamines and dissolved organic matter (DOM) in freshwater is a significant concern from the perspective of public health and drinking water treatment plant operation. This study investigated the N-nitrosamines concentration and their precursors' distributions, and DOM composition in four reservoirs located in a southern city of China. A total of 22 renowned precursors were identified. Precursors from industrial and pharmaceutical origins were found to be dominant in all reservoirs; however, traces of pesticide-based precursors, i.e. pirimicarb and cycluron were also found. The distribution of nine N-nitrosamines was substantially different among the reservoirs. N-Nitrosodibutylamine (NDBA), N-Nitrosopiperidine (NPIP), N-Nitrosodimethylamine (NDMA), and N-Nitrosopyrrolidine (NPYR) were abundantly present in all reservoirs. Most of N-nitrosamines except NDMA and N-nitrosodiethylamine (NDEA) were far below the generally accepted cancer risk of 10^-6, and NDMA/NDEA were found close to the risk level (10^-6). Anthropogenic DOM was dominant in three reservoirs as depicted by a higher biological index (BIX) than the humification index (HIX). By the principle component analysis, BIX appeared as an indicator of N-nitrosamines (except NDEA and NPIP). A strong and direct relationship was observed between the NDMA-formation potential (FP) and concentration of total N-nitrosamines (∑NA), and BIX. These results confirmed that the anthropogenic activities were the leading source of DOM and N-nitrosamines in this city based on land-use.

A year-long cyclic pattern of dissolved organic matter in the tap water of a metropolitan city revealed by fluorescence spectroscopy

Delivering drinking water with stable quality in metropolitan cities is a big challenge. This study investigated the year-long dynamics of dissolved organic matter (DOM) in the tap water and source water of a metropolitan city in southern China using fluorescence spectroscopy. The DOM detected in the tap water, and source water of Shenzhen city was season and location-dependent. A year-long cyclic trend of DOM was found with predominate protein-like fluorescence in the dry season compared to the humic-like enriched DOM in the wet season. A general DOM pattern was estimated by measuring the shift in dominant fluorescence regions on the excitation-emission matrix (EEM). The difference in fluorescent DOM (FDOM) composition (in terms of the ratio of protein-like to humic-like fluorescence) was above 200% between wet and dry seasons. The taps associated with reservoirs receiving water from the eastern tributary of Dongjiang River showed significant changes in protein-like contents than the taps with source water originating from the western part of the river. This study highlights the importance of optimizing drinking water treatment plants' operational conditions after considering seasonal changes and source water characteristics.

Characterization and physicochemical aspects of novel cellulose-based layered double hydroxide nanocomposite for removal of antimony and fluoride from aqueous solution

A series of novel adsorbents composed of cellulose (CL) with Ca/Al layered double hydroxide (CC_xA; where x represent the Ca/Al molar ratio) were prepared for the adsorption of antimony (Sb(V)) and fluoride (F^-) ions from aqueous solutions. The CC_xA was characterized by Fourier-transform infrared spectroscopy (FTIR), Brunauer-Emmett-Teller (BET), elemental analysis (CHNS/O), thermogravimetric analysis (TGA-DTA), zeta potential, X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX) analysis. The effects of varying parameters such as dose, pH, contact time, temperature and initial concentration on the adsorption process were investigated. According to the obtained results, the adsorption processes were described by a pseudo-second-order kinetic model. Langmuir adsorption isotherm model provided the best fit for the experimental data and was used to describe isotherm constants. The maximum adsorption capacity was found to be 77.2 and 63.1 mg/g for Sb(V) and F^-, respectively by CC₃A (experimental conditions: pH 5.5, time 60 min, dose 15 mg/10 mL, temperature 298 K). The CC₃A nanocomposite was able to reduce the Sb(V) and F^- ions concentration in synthetic solution to lower than 6 μg/L and 1.5 mg/L, respectively, which are maximum contaminant levels of these elements in drinking water according to WHO guidelines.

Elucidating the impacts of intermittent in-situ ozonation in a ceramic membrane bioreactor: Micropollutant removal, microbial community evolution and fouling mechanisms

In this study, impacts of in-situ ozonation applied directly in the membrane tank of a ceramic MBR (Oz-MBR) were assessed to elucidate its implications on micropollutant removal, microbial taxa and membrane fouling. The basic effluent quality (i.e., bulk organics and nutrients) of the MBR without and with in-situ ozonation was comparable. Importantly, pollutant-specific (10-26%) improvement in micropollutant removal was achieved by the Oz-MBR, which could be attributed to the increase in the abundance of microbial taxa responsible for the removal of structurally complex pollutants and/or ozone-assisted oxidation. In-situ ozonation affected the abundance of denitrifying bacteria and functional genes but total nitrogen removal by the Oz-MBR was comparable to that achieved by the control (C)-MBR. Improved mixed liquor properties, and the reduced accumulation of foulants on the membrane surface resulted in membrane fouling alleviation (53%) in the Oz-MBR. In addition, fouling models evaluated for the first time in the case of Oz-MBR indicated that the cake-complete model was suitable to explain membrane fouling mechanism. This comprehensive study demonstrates the performance of MBR coupled with in-situ ozonation, and the obtained results would serve as a useful reference for its implementation at pilot- and/or full-scale.

Lithium recovery from salt-lake brine: Impact of competing cations, pretreatment and preconcentration

The global demand of lithium is rising steadily, and many industrially advanced countries may find it hard to secure an uninterrupted supply of lithium for meeting their manufacturing demands. Thus, innovative processes for lithium recovery from a wide range of natural reserves should be explored for meeting the future demands. In this study, a novel integrated approach was investigated by combining nanofiltration (NF), membrane distillation (MD) and precipitation processes for lithium recovery from salt-lake brines. Initially, the brine was filtered with an NF membrane for the separation of lithium ions (Li⁺) from competing ions such as Na⁺, K⁺, Ca²⁺ and Mg²⁺. The extent of permeation of metal ions by the NF membrane was governed by their hydrated ionic radii. Rejection by NF membrane was 42% for Li, 48% for Na and 61% for K, while both the divalent cations were effectively rejected (above 90%). Importantly, in the NF-permeate, Mg²⁺/Li⁺ mass ratio reduced to less than 6 (suggested for lithium recovery). The result showed that MD can enrich lithium with a concentration of 2.5 for raw brine and 5 for NF-treated brine. Following the enrichment of NF-permeate by the MD membrane, a two-stage precipitation method was used for the recovery of lithium. X-ray diffraction confirmed the precipitation of lithium as well as the formation of lithium carbonate crystals.

Powdered activated carbon - Membrane bioreactor (PAC-MBR): Impacts of high PAC concentration on micropollutant removal and microbial communities

In this study, the effect of a high concentration of powdered activated carbon (PAC) on pollutant removal and microbial communities was systematically investigated. Micropollutant removal by the 'control' MBR (without PAC addition) was pollutant-specific and was mainly controlled by their molecular properties. The PAC-MBR achieved enhanced removal of micropollutant by 10% (ofloxacin) to 40% (caffeine). Analysis of the microbial communities in the sludge samples collected from both MBRs indicated an increase in the abundance of 24 (out of 31) genera following PAC addition. Notably, bacterial diversity enriched, particularly in the anoxic zone of the PAC-MBR, indicating a positive impact of recirculating mixed liquor containing PAC from the aerobic to the anoxic zone. In addition, PAC improved the abundance of Comamonas and Methanomethylovorans (up to 2.5%) that can degrade recalcitrant micropollutants. According to the quantitative PCR (qPCR) analysis, the copies of functional genes (nirS, nosZ and narG) increased in PAC-MBR. This study demonstrated that MBR could be operated at a high PAC concentration without compromising the pollutant removal and microbial community evolution during wastewater treatment.

Electrochemical membrane bioreactors: State-of-the-art and future prospects

Integration of an electrochemical process with membrane bioreactor (MBR) has attracted considerable attention in the last decade for simultaneous improvement in pollutant removal and hydraulic performance of MBR. Electrochemical MBR (eMBR) with sacrificial anodes has been observed to achieve enhanced phosphorus (up to 40%) and micropollutant removal (5-60%). This is because direct anodic oxidation, indirect oxidation by reactive oxygen species and electrocoagulation can supplement the biological process. The application of an electric field can substantially reduce membrane fouling by 10% to 95% in the eMBR as compared to the conventional MBR. Sacrificial electrodes (e.g., iron or aluminium) have been reported to be more suitable for fouling mitigation than non-sacrificial electrodes (e.g., titanium). However, during prolonged operation, metal ions released from sacrificial electrodes can adversely affect microbial activity and could accumulate in activated sludge. Depending on the current density and electrode material (sacrificial or non- sacrificial), anodic oxidation, electrocoagulation, electrophoresis and/or electroosmosis mechanisms are responsible for suppressing membrane fouling propensity. This paper critically reviews the current status of the electrochemical MBR technology and presents a concise summary of eMBR configurations and electrode materials. Comparative removal of bulk organics, nutrients and micropollutants in the eMBR and conventional MBR is discussed, and performance governing factors are elucidated. Impacts of operating conditions such as current density on mixed liquor properties (e.g., floc size and zeta potential) and microbial activity are elucidated. The extent of membrane fouling mitigation along with associated mechanisms as well as energy consumption is explained and critically analysed. Future research directions are suggested to fast track the scalability of eMBR, which include but are not limited to electrode lifetime, development of self-cleaning conductive membranes, optimisation of operating parameters, removal of emerging micropollutants, accumulation of toxic metals in activated sludge, and degradation by-products and ecotoxicity.

Exploring the relative changes in dissolved organic matter for assessing the water quality of full-scale drinking water treatment plants using a fluorescence ratio approach

This study aims to extend and demonstrate the application of fluorescence spectroscopy for monitoring the water quality of three differently operated full-scale drinking water treatment plants located in the Shenzhen city (China). A ratio of fluorescent dissolved organic matter (FDOM), which describes relative changes in humic-like to protein-like fluorescence, was used to explain mechanisms behind the physicochemical processes. The fluorescence components obtained through individual and combined parallel factor analysis (PARAFAC) modeling revealed the presence of humic-like (C1) and protein-like (C2) structures in the DOM. The C1/C2 ratio provided a direct relationship between the seasonal variations and DOM composition. Wet season generated DOM enriched with humic-like fluorescence, while dry season caused a higher release of protein-like fluorescence. The fluorescence ratio presented unique patterns of DOM in treatment trains. The chemical pretreatment and disinfection unit processes showed a higher tendency to remove the humic-like fluorescence. However, the C1/C2 ratio increased during physical treatment processes such as coagulation-precipitation and sand filtration, indicating preferential removal of protein-like fluorescence. The DOM composition in influent directly (R² = 0.77) influenced the relative intensities of fluorescence components in the treated water. Compared to the dry season, the wet season caused significant changes in DOM composition and produced treated water enriched with humic-like fluorescence. This fluorescence ratio offers an approach to explore the role of different treatment units and determine the factors affecting the composition of DOM in the surface water and drinking water treatment plants.

Seasonal occurrence of N-nitrosamines and their association with dissolved organic matter in full-scale drinking water systems: Determination by LC-MS and EEM-PARAFAC

N-nitrosamines have been identified as emerging contaminants with tremendous carcinogenic potential for human beings. This study examined the seasonal changes in the occurrence of N-nitrosamines and N-nitrosodimethylamine formation potential (NDMA-FP) in drinking water resources and potable water from 10 drinking water treatment plants in a southern city of China. The changes in N-nitrosamines are well correlated with dissolved organic matter (DOM), particularly fluorophores, which were measured and compared between traditional fluorescence indices and excitation-emission matrix coupled with parallel factor analysis (EEM-PARAFAC). Four of N-nitrosamine species including N-nitrosodimethylamine (NDMA), N-Nitrosodibutylamine (NDBA), N-Nitrosopyrrolidine (NPYR), and N-Nitrosodiphenylamine (NDPhA) are found to be abundant compounds with an average of 29.5% (26.7%), 20.0% (25.2%), 18.9% (16.0%), and 9.0% (9.9%) in the source (and treated) water, respectively. The sum of N-nitrosamines concentration is recorded to be low in the wet season (July-September), whereas the dry season (October-December) provided opposite impacts. EEM-PARAFAC modeling indicated the predominance of humic-like component (C1) in the wet season while in the dry season the water was dominant in protein-like component (C2). All the N-nitrosamines excluding NDPhA and N-Nitrosomorpholine (NMOR) showed a strong association with protein-like component (C2). In contrast, humic-like C1, which was directly influenced by rainfall, was found to be a suitable proxy for NMOR and NDPhA. The results of this study are valuable to understand the correlation between different N-nitrosamines and DOM through adopting fluorescence signatures.

Fate and role of fluorescence moieties in extracellular polymeric substances during biological wastewater treatment: A review

In biological wastewater treatment systems, extracellular polymeric substances (EPS) are continuously excreted as a response to environmental changes and substrate conditions. It could severely affect the treatment efficacy such as membrane fouling, dewaterability and the formation of carcinogenic disinfection by-products (DBPs). The heterogeneous dissolved organic matter (DOM) with varying size and chemical nature constitute a primary proportion of EPS. In the last few decades, fluorescence spectroscopy has received increasing attention for characterizing these organic substances due to the attractive features of this low-cost spectroscopic approach, including easy sample handling, rapid, non-destructive and highly sensitive nature. In this review, we summarize the application of fluorescence spectroscopy for characterizing EPS and provide the potential implications for online monitoring of water quality along with its limitations. We also link the dynamics of fluorescent dissolved organic matter (FDOM) in EPS with operational and environmental changes in wastewater treatment systems as well as their associations with metal binding, membrane fouling, adsorption, toxicity, and dewaterability. The multiple modes of exploration of fluorescence spectra, such as synchronous spectra with or without coupling with two-dimensional correlation spectroscopy (2D-COS), excitation-emission matrix (EEM) deconvoluted fluorescence regional integration (FRI), and parallel factor analysis (PARAFAC) are also discussed. The potential fluorescence indicators to depict the composition and bulk characteristics of EPS are also of interest. Further studies are highly recommended to expand the application of fluorescence spectroscopy paired with appropriate supplementary techniques to fully unravel the underlying mechanisms associated with EPS.

Understanding the factors affecting the adsorption of Lanthanum using different adsorbents: A critical review

Over the past few decades, removal and recovery of Lanthanum (La) have received great attention due to its significance in different industrial processes. In this review, the application of various adsorbents viz. biosorbents, commercial and hybrid materials, nanoparticles, nanocomposites etc. have been summarized in terms of the removal and recovery of La. The influence of various operating parameters including pH, dosage, contact time, temperature, coexisting ions, adsorption kinetics, isotherm and thermodynamics were investigated. Statistical analysis of the obtained data revealed that 60% and 70% of the authors reported an optimum pH of 4-6 and a dose of 1-2 g/L, respectively. It can be concluded on the basis of an extensive literature survey that the adsorbent materials (especially hybrids nanocomposites) containing carboxyl, hydroxyl and amine groups offered efficient La removal over a wide range of pH with higher adsorption capacity as compared to other adsorbents (e.g., biosorbents and magnetic adsorbents). Also, in most cases, equilibrium and kinetics were followed by Langmuir and pseudo second-order model and adsorption was endothermic in nature. To evaluate the adsorption efficiency of several adsorbents towards La, desorption and regeneration of adsorbents should be given due consideration. The main objective of the review is to provide an insight into the important factors that may affect the recovery of La using various adsorbents.

Influence of relaxation modes on membrane fouling in submerged membrane bioreactor for domestic wastewater treatment

Relaxation and backwashing have become an integral part of membrane bioreactor (MBR) operations for fouling control. This study was carried out on real municipal wastewater to evaluate the influence of different operational strategies on membrane fouling at equivalent water yield. Four relaxation modes (MBR_10+0, MBR₁₀₊₁, MBR_10+1.5 and MBR₁₀₊₂) were tested to analyze membrane fouling behavior. For the optimization of relaxation modes, fouling rate in terms of trans-membrane pressure, hydraulic resistances and characteristics of fouling fractions were analyzed. It has been observed that cake layer resistance was minimum in MBR_10+1.5 but pore blockage resistance was increased in all relaxation modes. Moreover, high instantaneous flux contributed significantly to fouling rate at the initial stage of MBR operations. Relaxation modes were also efficient in removing irreversible fouling to some extent. Under all relaxation modes, COD removal efficiency ranged from 92 to 96.5%. Ammonium and TP removal were on the lower side due to the short solids and hydraulic retention time.

Study of physio-psychological effects on traffic wardens due to traffic noise pollution; exposure-effect relation

BACKGROUND

Noise pollution has increased to alarming extent in most of the urban areas in Pakistan. It is assumed even more perilous than air and water pollution due to its direct acute and chronic physio-psychological effects. The objective of this study is to analyze and evaluate the psychological and physiological effects caused by traffic noise on traffic wardens and to find relation type between exposure time and effect.

METHODS

Three wardens check posts near roads were selected for survey in Taxila and Islamabad cities of Pakistan. Survey conducted included noise measurements at aforementioned check posts for one month and Performa based interviews of traffic wardens.

RESULTS AND CONCLUSIONS

Analysis of results showed that noise levels varied between 85-106 dB hence violating OSHA regulations. Major psychological effects found in wardens were aggravated depression 58%, stress 65%, public conflict 71%, irritation and annoyance 54%, behavioral affects 59% and speech interference 56%. Physiological effects found were hypertension 87%, muscle tension 64%, exhaustion 48%, low performance levels 55%, concentration loss 93%, hearing impairment 69%, headache 74% and cardiovascular issue 71%. Relation between exposure time and effects were evaluated by using simple regression test in excel. Percentage of psychological and physiological effects in wardens varied with the exposure time; aggravated depression (R(2) = 0.946, P = 0.133), stress suffering (R(2) = 0.014, P = 0.173), public conflict (R(2) = 0.946, P = 0.133), irritation and annoyance (R(2) = 0.371, P = 0.137), behavioral affects (R(2) = 0.596, P = 0.0616) and speech interference (R(2) = 0.355, P = 0.445), hypertension (R(2) = 0.96, P = 0.00095) and cardiovascular issue (R(2) = 0.775, P = 0.044).