Enhanced H2 gas production from bagasse using adhE inactivated Klebsiella oxytoca HP1 by sequential dark-photo fermentations

Sequential dark-photo fermentations (SDPF) was used for hydrogen production from bagasse, an acetaldehyde dehydrogenase (adhE) gene inactivated Klebsiella oxytoca HP1 (DeltaadhE HP1) mutant was used to reduce the alcohol content in dark fermentation (DF) broths and to further enhance the hydrogen yield during the photo fermentation (PF) stage. Compared with that of the wild strain, the ethanol concentration in DF broths of DeltaadhE HP1 decreased 69.4%, which resulted in a hydrogen yield in the PF stage and the total hydrogen yield over the two steps increased by 54.7% and 23.5%, respectively. The culture conditions for hydrogen production from acid pretreated bagasse by SDPF were optimized as culture temperature 37.5 degrees C, initial pH 7.0, and cellulase loading 20 FPA/g in the DF stage, with initial pH 6.5, temperature 30 degrees C and photo intensity 5,000 lux in the PF stage. Under optimum conditions, by using DeltaadhE HP1 and wild type strain, the H(2) yields were 107.8+/-5.3 mL H(2)/g-bagasse, 96.2+/-4.4 mL H(2)/g-bagasse in DF and 54.3+/-2.2 mL H(2)/g-bagasse, 35.1+/-2.0 mL H(2)/g-bagasse in PF, respectively. The special hydrogen production rate (SHPR) were 5.51+/-0.34 mL H(2)/g-bagasseh, 4.95+/-0.22 mL H(2)/g-bagasseh in DF and 0.93+/-0.12 mL H(2)/g-bagasseh, 0.59+/-0.07 mL H(2)/g-bagasseh in PF, respectively. The total hydrogen yield from bagasse over two steps was 162.1+/-7.5 mL H(2)/g-bagasse by using DeltaadhE HP1, which was 50.4% higher than that from dark fermentation only. These results indicate that reducing ethanol content during dark fermentation by using an adhE inactivated strain can significantly enhance hydrogen production from bagasse in the SDPF system. This work also proved that SDPF was an effective way to improve hydrogen production from bagasse.

Calibrated nanoscale capacitance measurements using a scanning microwave microscope

A scanning microwave microscope (SMM) for spatially resolved capacitance measurements in the attofarad-to-femtofarad regime is presented. The system is based on the combination of an atomic force microscope (AFM) and a performance network analyzer (PNA). For the determination of absolute capacitance values from PNA reflection amplitudes, a calibration sample of conductive gold pads of various sizes on a SiO(2) staircase structure was used. The thickness of the dielectric SiO(2) staircase ranged from 10 to 200 nm. The quantitative capacitance values determined from the PNA reflection amplitude were compared to control measurements using an external capacitance bridge. Depending on the area of the gold top electrode and the SiO(2) step height, the corresponding capacitance values, as measured with the SMM, ranged from 0.1 to 22 fF at a noise level of ~2 aF and a relative accuracy of 20%. The sample capacitance could be modeled to a good degree as idealized parallel plates with the SiO(2) dielectric sandwiched in between. The cantilever/sample stray capacitance was measured by lifting the tip away from the surface. By bringing the AFM tip into direct contact with the SiO(2) staircase structure, the electrical footprint of the tip was determined, resulting in an effective tip radius of ~60 nm and a tip-sample capacitance of ~20 aF at the smallest dielectric thickness.

Improved localization of cellular membrane receptors using combined fluorescence microscopy and simultaneous topography and recognition imaging

The combination of fluorescence microscopy and atomic force microscopy has a great potential in single-molecule-detection applications, overcoming many of the limitations coming from each individual technique. Here we present a new platform of combined fluorescence and simultaneous topography and recognition imaging (TREC) for improved localization of cellular receptors. Green fluorescent protein (GFP) labeled human sodium-glucose cotransporter (hSGLT1) expressed Chinese Hamster Ovary (CHO) cells and endothelial cells (MyEnd) from mouse myocardium stained with phalloidin-rhodamine were used as cell systems to study AFM topography and fluorescence microscopy on the same surface area. Topographical AFM images revealed membrane features such as lamellipodia, cytoskeleton fibers, F-actin filaments and small globular structures with heights ranging from 20 to 30 nm. Combined fluorescence and TREC imaging was applied to detect density, distribution and localization of YFP-labeled CD1d molecules on alpha-galactosylceramide (alphaGalCer)-loaded THP1 cells. While the expression level, distribution and localization of CD1d molecules on THP1 cells were detected with fluorescence microscopy, the nanoscale distribution of binding sites was investigated with molecular recognition imaging by using a chemically modified AFM tip. Using TREC on the inverted light microscope, the recognition sites of cell receptors were detected in recognition images with domain sizes ranging from approximately 25 to approximately 160 nm, with the smaller domains corresponding to a single CD1d molecule.

Exposure to chloramines in a green salad processing plant

Acute eye and upper respiratory irritation was reported at an industrial facility that processes green salads in water containing hypochlorite. The irritant agents were chloramines resulting from the reaction of hypochlorite and nitrogen compounds coming from the sap proteins released when the vegetables were cut. Specific sampling and analytical methods were developed in order to assess the workers' exposure. Monochloramine, dichloramine and nitrogen trichloride were found in the atmosphere, which can explain the irritation phenomena of which the workers complained. In the washing room (where salads are processed), the total chloramine concentration ranged from 0.4 to 16 mg.m-3, depending on the day and the location of the area sampling points. The exposure of workers determined by personal sampling ranged from 0.2 to 5 mg.m-3. In a previous study, with swimming pool instructors exposed to the same pollutants, irritation phenomena generally appeared at chloramine values of around 0.5 mg.m-3.