Carrageenan from Gigartina skottsbergii: A Novel Molecular Probe to Detect SARS-CoV-2

The COVID-19 pandemic has caused an unprecedented health and economic crisis, highlighting the importance of developing new molecular tools to monitor and detect SARS-CoV-2. Hence, this study proposed to employ the carrageenan extracted from Gigartina skottsbergii algae as a probe for SARS-CoV-2 virus binding capacity and potential use in molecular methods. G. skottsbergii specimens were collected in the Chilean subantarctic ecoregion, and the carrageenan was extracted -using a modified version of Webber's method-, characterized, and quantified. After 24 h of incubation with an inactivated viral suspension, the carrageenan's capacity to bind SARS-CoV-2 was tested. The probe-bound viral RNA was quantified using the reverse transcription and reverse transcription loop-mediated isothermal amplification (RT-LAMP) methods. Our findings showed that carrageenan extraction from seaweed has a similar spectrum to commercial carrageenan, achieving an excellent proportion of binding to SARS-CoV-2, with a yield of 8.3%. Viral RNA was also detected in the RT-LAMP assay. This study shows, for the first time, the binding capacity of carrageenan extracted from G. skottsbergii, which proved to be a low-cost and highly efficient method of binding to SARS-CoV-2 viral particles.

In vitro efficacy of commercial and experimental proteolytic enzyme-based whitening dentifrices on enamel whitening and superficial roughness

OBJECTIVE

To evaluate the whiteness index (W_ID ) and surface roughness (Ra) of bovine enamel after simulated tooth brushing with different commercial and experimental whitening dentifrices.

MATERIALS AND METHODS

Cylindrical enamel bovine specimens were acid etched, stained, and divided in nine groups (n = 8): Colgate® Optic White®, Crest® Baking Soda and Peroxide, Arm and Hammer® Advanced White™ Extreme Whitening, Rembrandt® Deeply White® + Peroxide, Close up® White Attraction Natural Glow, Hinode Prowhite, and experimental dentifrice containing papain (PP), bromelain (PB), or papain and bromelain (PPB). Ra and W_ID were obtained initially and after 600, 1200, and 3,600 cycles of simulated tooth brushing. Data were analyzed using two-way analysis of variance test (α = 0.05).

RESULTS

Ra was significantly influenced by both dentifrice (p = 0.043) and period of tooth-brushing simulation (p < 0.001). Except for PP and PPB, all groups showed a statistically significant increase in Ra after simulated tooth brushing. After staining and brushing, none of the materials tested increased the initial W_ID .

CONCLUSIONS

The effect of commercial whitening dentifrices may be related to their high abrasiveness. Experimental formulations tested provided a similar effect without undesired wear of enamel. Whitening dentifrices only act through an abrasive effect rather than bleaching the tooth structures. When used, special care must be taken for avoid undesired wear of enamel. Experimental dentifrices provided similar removal of extrinsic stains without undesired abrasiveness; however, this effect may be due to the use of less aggressive abrasives in their formulations.

Fast and simultaneous doping of Sr0.9-x-y-zCa0.1In2O4:(xEu3+, yTm3+, zTb3+) superstructure by ultrasonic spray pyrolysis

In the present work, Sr_0.9-x-y-zCa_0.1In₂O₄:(xEu³⁺, yTm³⁺, zTb³⁺) particles were synthesized by the ultrasonic spray pyrolysis (USP) method to obtain a single-phase white phosphorus formed by six different cations in solution within the lattice (superstructure). The samples were also structurally and morphologically characterized by X-ray diffraction (XRD) techniques and by field emission scanning electron microscopy (FE-SEM). The photoluminescent behavior and the characteristics of the emitted colors were studied by the variation in the co-doping of the rare earth elements. The Sr_0.9Ca_0.1In₂O₄ sample showed a near blue color emission, but all co-doped samples showed emission in white with very close chromaticity coordinates to the standard white (x = 0.33 and y = 0.33). The Tm³⁺ → Tb³⁺ (ET1), Tm³⁺ → Eu³⁺ (ET2) and Tb³⁺ → Eu³⁺ (ET3) Energy Transfers were proposed and are considered necessary for adjusting and controlling the desired color properties.

Tunable graphene oxide inter-sheet distance to obtain graphene oxide–silver nanoparticle hybrids

An improved capacitor using silver nanoparticles incorporated within sheets of graphene oxide. 90 times higher specific capacitance than bare graphene oxide.

Electrochemical Cathodic Polarization, a Simplified Method That Can Modified and Increase the Biological Activity of Titanium Surfaces: A Systematic Review

Background

The cathodic polarization seems to be an electrochemical method capable of modifying and coat biomolecules on titanium surfaces, improving the surface activity and promoting better biological responses.

Objective

The aim of the systematic review is to assess the scientific literature to evaluate the cellular response produced by treatment of titanium surfaces by applying the cathodic polarization technique.

Data, Sources, and Selection

The literature search was performed in several databases including PubMed, Web of Science, Scopus, Science Direct, Scielo and EBSCO Host, until June 2016, with no limits used. Eligibility criteria were used and quality assessment was performed following slightly modified ARRIVE and SYRCLE guidelines for cellular studies and animal research.

Results

Thirteen studies accomplished the inclusion criteria and were considered in the review. The quality of reporting studies in animal models was low and for the in vitro studies it was high. The in vitro and in vivo results reported that the use of cathodic polarization promoted hydride surfaces, effective deposition, and adhesion of the coated biomolecules. In the experimental groups that used the electrochemical method, cellular viability, proliferation, adhesion, differentiation, or bone growth were better or comparable with the control groups.

Conclusions

The use of the cathodic polarization method to modify titanium surfaces seems to be an interesting method that could produce active layers and consequently enhance cellular response, in vitro and in vivo animal model studies.

Adsorbent 2D and 3D carbon matrices with protected magnetic iron nanoparticles

We report on the synthesis of two and three dimensional carbonaceous sponges produced directly from graphene oxide (GO) into which functionalized iron nanoparticles can be introduced to render it magnetic. This simple, low cost procedure, wherein an iron polymeric resin precursor is introduced into the carbon framework, results in carbon-based materials with specific surface areas of the order of 93 and 66 m(2) g(-1), compared to approx. 4 m(2) g(-1) for graphite, decorated with ferromagnetic iron nanoparticles giving coercivity fields postulated to be 216 and 98 Oe, values typical for ferrite magnets, for 3.2 and 13.5 wt% Fe respectively. The strongly magnetic iron nanoparticles are robustly anchored to the GO sheets by a layer of residual graphite, on the order of 5 nm, formed during the pyrolysis of the precursor material. The applicability of the carbon sponges is demonstrated in their ability to absorb, store and subsequently elute an organic dye, Rhodamine B, from water as required. It is possible to regenerate the carbon-iron hybrid material after adsorption by eluting the dye with a solvent to which it has a high affinity, such as ethanol. The use of a carbon framework opens the hybrid materials to further chemical functionalization, for enhanced chemical uptake of contaminants, or co-decoration with, for example, silver nanoparticles for bactericidal properties. Such analytical properties, combined with the material's magnetic character, offer solutions for environmental decontamination at land and sea, wastewater purification, solvent extraction, and for the concentration of dilute species.

Films based on oxidized starch and cellulose from barley

Starch and cellulose fibers were isolated from grains and the husk from barley, respectively. Biodegradable films of native starch or oxidized starches and glycerol with different concentrations of cellulose fibers (0%, 10% and 20%) were prepared. The films were characterized by morphological, mechanical, barrier, and thermal properties. Cellulose fibers isolated from the barley husk were obtained with 75% purity and high crystallinity. The morphology of the films of the oxidized starches, regardless of the fiber addition, was more homogeneous as compared to the film of the native starch. The addition of cellulose fibers in the films increased the tensile strength and decreased elongation. The water vapor permeability of the film of oxidized starch with 20% of cellulose fibers was lower than the without fibers. However the films with cellulose fibers had the highest decomposition with the initial temperature and thermal stability. The oxidized starch and cellulose fibers from barley have a good potential for use in packaging. The addition of cellulose fibers in starch films can contribute to the development of films more resistant that can be applied in food systems to maintain its integrity.

Comparing different methods to fix and to dehydrate cells on alginate hydrogel scaffolds using scanning electron microscopy

Scanning electron microscopy (SEM) is commonly used in the analysis of scaffolds morphology, as well as cell attachment, morphology and spreading on to the scaffolds. However, so far a specific methodology to prepare the alginate hydrogel (AH) scaffolds for SEM analysis has not been evaluated. This study compared different methods to fix/dehydrate cells in AH scaffolds for SEM analysis. AH scaffolds were prepared and seeded with NIH/3T3 cell line; fixed with glutaraldehyde, osmium tetroxide, or the freeze drying method and analyzed by SEM. Results demonstrated that the freeze dried method interferes less with cell morphology and density, and preserves the scaffolds structure. The fixation with glutaraldehyde did not affect cells morphology and density; however, the scaffolds morphology was affected in some level. The fixation with osmium tetroxide interfered in the natural structure of cells and scaffold. In conclusion the freeze drying and glutaraldehyde are suitable methods for cell fixation in AH scaffold for SEM, although scaffolds structure seems to be affected by glutaraldehyde.