1
|
Charge Concentration Limits the Hydrogen Evolution Rate in Organic Nanoparticle Photocatalysts. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2024; 36:e2210481. [PMID: 36972554 DOI: 10.1002/adma.202210481] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/11/2022] [Revised: 02/08/2023] [Indexed: 06/18/2023]
Abstract
Time-resolved microwave conductivity is used to compare aqueous-soluble organic nanoparticle photocatalysts and bulk thin films composed of the same mixture of semiconducting polymer and non-fullerene acceptor molecule and the relationship between composition, interfacial surface area, charge-carrier dynamics, and photocatalytic activity is examined. The rate of hydrogen evolution reaction by nanoparticles composed of various donor:acceptor blend ratio compositions is quantitatively measured, and it is found that the most active blend ratio displays a hydrogen quantum yield of 0.83% per photon. Moreover, it is found that nanoparticle photocatalytic activity corresponds directly to charge generation, and that nanoparticles have 3× more long-lived accumulated charges relative to bulk samples of the same material composition. These results suggest that, under the current reaction conditions, with ≈3× solar flux, catalytic activity by the nanoparticles is limited by the concentration of electrons and holes in operando and not a finite number of active surface sites or the catalytic rate at the interface. This provides a clear design goal for the next generation of efficient photocatalytic nanoparticles.
Collapse
|
2
|
The Excited-State Lifetime of Poly(NDI2OD-T2) Is Intrinsically Short. THE JOURNAL OF PHYSICAL CHEMISTRY. C, NANOMATERIALS AND INTERFACES 2024; 128:6392-6400. [PMID: 38655059 PMCID: PMC11033933 DOI: 10.1021/acs.jpcc.4c00653] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 01/30/2024] [Revised: 03/08/2024] [Accepted: 03/15/2024] [Indexed: 04/26/2024]
Abstract
Conjugated polymers composed of alternating electron donor and acceptor segments have come to dominate the materials being considered for organic photoelectrodes and solar cells, in large part because of their favorable near-infrared absorption. The prototypical electron-transporting push-pull polymer poly(NDI2OD-T2) (N2200) is one such material. While reasonably efficient organic solar cells can be fabricated with N2200 as the acceptor, it generally fails to contribute as much photocurrent from its absorption bands as the donor with which it is paired. Moreover, transient absorption studies have shown N2200 to have a consistently short excited-state lifetime (∼100 ps) that is dominated by a ground-state recovery. In this paper, we investigate whether these characteristics are intrinsic to the backbone structure of this polymer or if these are extrinsic effects from ubiquitous solution-phase and thin-film aggregates. We compare the solution-phase photophysics of N2200 with those of a pair of model compounds composed of alternating bithiophene (T2) donor and naphthalene diimide (NDI) acceptor units, NDI-T2-NDI and T2-NDI-T2, in a dilute solution. We find that the model compounds have even faster ground-state recovery dynamics (τ = 45, 27 ps) than the polymer (τ = 133 ps), despite remaining molecularly isolated in solution. In these molecules, as in the case of the N2200 polymer, the lowest excited state has a T2 to NDI charge-transfer (CT) character. Electronic-structure calculations indicate that the short lifetime of this state is due to fast nonradiative decay to the ground state (GS) promoted by strong CT-GS electronic coupling and strong electron-vibrational coupling with high-frequency (quantum) normal modes.
Collapse
|
3
|
Molecular Control of Triplet-Pair Spin Polarization and Its Optoelectronic Magnetic Resonance Probes. Acc Chem Res 2024; 57:59-69. [PMID: 38103045 PMCID: PMC10765369 DOI: 10.1021/acs.accounts.3c00556] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/05/2023] [Revised: 11/21/2023] [Accepted: 11/22/2023] [Indexed: 12/17/2023]
Abstract
ConspectusPreparing and manipulating pure magnetic states in molecular systems are the key initial requirements for harnessing the power of synthetic chemistry to drive practical quantum sensing and computing technologies. One route for achieving the requisite higher spin states in organic systems exploits the phenomenon of singlet fission, which produces pairs of triplet excited states from initially photoexcited singlets in molecular assemblies with multiple chromophores. The resulting spin states are characterized by total spin (quintet, triplet, or singlet) and its projection onto a specified molecular or magnetic field axis. These excited states are typically highly polarized but exhibit an impure spin population pattern. Herein, we report the prediction and experimental verification of molecular design rules that drive the population of a single pure magnetic state and describe the progress toward its experimental realization.A vital feature of this work is the close partnership among theory, chemical synthesis, and spectroscopy. We begin by presenting our theoretical framework for understanding spin manifold interconversion in singlet fission systems. This theory makes specific testable predictions about the intermolecular structure and orientation relative to an external magnetic field that should lead to pure magnetic state preparation and provides a powerful tool for interpreting magnetic spectra. We then test these predictions through detailed magnetic spectroscopy experiments on a series of new molecular architectures that meet one or more of the identified structural criteria. Many of these architectures rely on the synthesis of molecules with features unique to this effort: rigid bridges between chromophores in dimers, heteroacenes with tailored singlet/triplet-pair energy level matching, or side-group engineering to produce specific crystal structures. The spin evolution of these systems is revealed through our application and development of several magnetic resonance methods, each of which has different sensitivities and relevance in environments relevant to quantum applications.Our theoretical predictions prove to be remarkably consistent with our experimental results, though experimentally meeting all the structural prescriptions demanded by theory for true pure-state preparation remains a challenge. Our magnetic spectra agree with our model of triplet-pair behavior, including funneling of the population to the ms = 0 magnetic sublevel of the quintet under specified conditions in dimers and crystals, showing that this phenomenon is subject to control through molecular design. Moreover, our demonstration of novel and/or highly sensitive detection mechanisms of spin states in singlet fission systems, including photoluminescence (PL), photoinduced absorption (PA), and magnetoconductance (MC), points the way toward both a deeper understanding of how these systems evolve and technologically feasible routes toward experiments at the single-molecule quantum limit that are desirable for computational applications.
Collapse
|
4
|
Near-Infrared Absorption Features of Triplet-Pair States Assigned by Photoinduced-Absorption-Detected Magnetic Resonance. J Phys Chem Lett 2023; 14:2387-2394. [PMID: 36848633 PMCID: PMC10009807 DOI: 10.1021/acs.jpclett.2c03665] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/01/2022] [Accepted: 02/22/2023] [Indexed: 06/18/2023]
Abstract
Singlet fission proceeds through a manifold of triplet-pair states that are exceedingly difficult to distinguish spectroscopically. Here, we introduce a new implementation of photoinduced-absorption-detected magnetic resonance (PADMR) and use it to understand the excited-state absorption spectrum of a tri-2-pentylsilylethynyl pentadithiophene (TSPS-PDT) film. These experiments allow us to directly correlate magnetic transitions driven by RF with electronic transitions in the visible and near-infrared spectrum with high sensitivity. We find that the new near-infrared excited-state transitions that arise in thin films of TSPS-PDT are correlated with the magnetic transitions of T1, not 5TT. Thus, we assign these features to the excited-state absorption of 1TT, which is depleted when T1 states are driven to a spin configuration that forbids subsequent fusion. These results clarify the disputed origin of triplet-associated near-infrared absorption features in singlet-fission materials and demonstrate an incisive general purpose tool for studying the evolution of high-spin excited states.
Collapse
|
5
|
Trap-Filling Magnetoconductance as an Initialization and Readout Mechanism of Triplet Exciton Spins. J Phys Chem Lett 2022; 13:9895-9902. [PMID: 36256578 DOI: 10.1021/acs.jpclett.2c02710] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 06/16/2023]
Abstract
Photoexcited triplet states are promising candidates for hybrid qubit systems, as they can be used as a controlling gate for nuclear spins. But microwave readout schemes do not generally offer the sensitivity needed to approach the single-molecule limit or the scope to integrate such systems into devices. Here, we demonstrate the possibility of electrical readout of triplet spins at room temperature through a specific mechanism of magnetoconductance (MC) in polycrystalline pentacene. We show that hole-only pentacene devices exhibit a positive photoinduced MC response that is consistent with a trap-filling mechanism. Spin and magnetic-field-dependent quenching of photogenerated triplets by holes quantitatively explains the MC response we observe. These results are distinct in both sign and proposed mechanism compared to previous reports on polyacene materials and provide clear design rules for future spintronic devices based on this spin-sensing mechanism.
Collapse
|
6
|
Controlled n-Doping of Naphthalene-Diimide-Based 2D Polymers. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2022; 34:e2101932. [PMID: 34850459 DOI: 10.1002/adma.202101932] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/10/2021] [Revised: 11/12/2021] [Indexed: 06/13/2023]
Abstract
2D polymers (2DPs) are promising as structurally well-defined, permanently porous, organic semiconductors. However, 2DPs are nearly always isolated as closed shell organic species with limited charge carriers, which leads to low bulk conductivities. Here, the bulk conductivity of two naphthalene diimide (NDI)-containing 2DP semiconductors is enhanced by controllably n-doping the NDI units using cobaltocene (CoCp2 ). Optical and transient microwave spectroscopy reveal that both as-prepared NDI-containing 2DPs are semiconducting with sub-2 eV optical bandgaps and photoexcited charge-carrier lifetimes of tens of nanoseconds. Following reduction with CoCp2 , both 2DPs largely retain their periodic structures and exhibit optical and electron-spin resonance spectroscopic features consistent with the presence of NDI-radical anions. While the native NDI-based 2DPs are electronically insulating, maximum bulk conductivities of >10-4 S cm-1 are achieved by substoichiometric levels of n-doping. Density functional theory calculations show that the strongest electronic couplings in these 2DPs exist in the out-of-plane (π-stacking) crystallographic directions, which indicates that cross-plane electronic transport through NDI stacks is primarily responsible for the observed electronic conductivity. Taken together, the controlled molecular doping is a useful approach to access structurally well-defined, paramagnetic, 2DP n-type semiconductors with measurable bulk electronic conductivities of interest for electronic or spintronic devices.
Collapse
|
7
|
Abstract
The optoelectronic properties of lead halide perovskite thin films can be tuned through compositional variations and strain, but the associated nanocrystalline structure makes it difficult to untangle the link between composition, processing conditions, and ultimately material properties and degradation. Here, we study the effect of processing conditions and degradation on the local photoconductivity dynamics in [(CsPbI3)0.05(FAPbI3)0.85(MAPbBr3)0.15] and (FA0.7Cs0.3PbI3) perovskite thin films using temporally and spectrally resolved microwave near-field microscopy with a temporal resolution as high as 5 ns and a spatial resolution better than 50 nm. For the latter FACs formulation, we find a clear effect of the process annealing temperature on film morphology, stability, and spatial photoconductivity distribution. After exposure of samples to ambient conditions and illumination, we find spectral evidence of halide segregation-induced degradation below the instrument resolution limit for the mixed halide formulation, while we find a clear spatially inhomogeneous increase in the carrier lifetime for the FACs formulation annealed at 180 °C.
Collapse
|
8
|
Short and long-range electron transfer compete to determine free-charge yield in organic semiconductors. MATERIALS HORIZONS 2022; 9:312-324. [PMID: 34787147 DOI: 10.1039/d1mh01331a] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
Understanding how Frenkel excitons efficiently split to form free-charges in low-dielectric constant organic semiconductors has proven challenging, with many different models proposed in recent years to explain this phenomenon. Here, we present evidence that a simple model invoking a modest amount of charge delocalization, a sum over the available microstates, and the Marcus rate constant for electron transfer can explain many seemingly contradictory phenomena reported in the literature. We use an electron-accepting fullerene host matrix dilutely sensitized with a series of electron donor molecules to test this hypothesis. The donor series enables us to tune the driving force for photoinduced electron transfer over a range of 0.7 eV, mapping out normal, optimal, and inverted regimes for free-charge generation efficiency, as measured by time-resolved microwave conductivity. However, the photoluminescence of the donor is rapidly quenched as the driving force increases, with no evidence for inverted behavior, nor the linear relationship between photoluminescence quenching and charge-generation efficiency one would expect in the absence of additional competing loss pathways. This behavior is self-consistently explained by competitive formation of bound charge-transfer states and long-range or delocalized free-charge states, where both rate constants are described by the Marcus rate equation. Moreover, the model predicts a suppression of the inverted regime for high-concentration blends and efficient ultrafast free-charge generation, providing a mechanistic explanation for why Marcus-inverted-behavior is rarely observed in device studies.
Collapse
|
9
|
Linking optical spectra to free charges in donor/acceptor heterojunctions: cross-correlation of transient microwave and optical spectroscopy. MATERIALS HORIZONS 2021; 8:1509-1517. [PMID: 34846459 DOI: 10.1039/d0mh01810d] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
The primary photoexcited species in excitonic semiconductors is a bound electron-hole pair, or exciton. An important strategy for producing separated electrons and holes in photoexcited excitonic semiconductors is the use of donor/acceptor heterojunctions, but the degree to which the carriers can escape their mutual Coulomb attraction is still debated for many systems. Here, we employ a combined pump-probe ultrafast transient absorption (TA) spectroscopy and time-resolved microwave conductivity (TRMC) study on a suite of model excitonic heterojunctions consisting of mono-chiral semiconducting single-walled carbon nanotube (s-SWCNT) electron donors and small-molecule electron acceptors. Comparison of the charge-separated state dynamics between TA and TRMC photoconductance reveals a quantitative match over the 0.5 microsecond time scale. Charge separation yields derived from TA allow extraction of s-SWCNT hole mobilities of ca. 1.5 cm2 V-1 s-1 (at 9 GHz) by TRMC. The correlation between the techniques conclusively demonstrates that photoinduced charge carriers separated across these heterojunctions do not form bound charge transfer states, but instead form free/mobile charge carriers.
Collapse
|
10
|
Conversion between triplet pair states is controlled by molecular coupling in pentadithiophene thin films. Chem Sci 2020; 11:7226-7238. [PMID: 34123008 PMCID: PMC8159287 DOI: 10.1039/d0sc02497j] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/02/2020] [Accepted: 06/21/2020] [Indexed: 11/21/2022] Open
Abstract
In singlet fission (SF) the initially formed correlated triplet pair state, 1(TT), may evolve toward independent triplet excitons or higher spin states of the (TT) species. The latter result is often considered undesirable from a light harvesting perspective but may be attractive for quantum information sciences (QIS) applications, as the final exciton pair can be spin-entangled and magnetically active with relatively long room temperature decoherence times. In this study we use ultrafast transient absorption (TA) and time-resolved electron paramagnetic resonance (TR-EPR) spectroscopy to monitor SF and triplet pair evolution in a series of alkyl silyl-functionalized pentadithiophene (PDT) thin films designed with systematically varying pairwise and long-range molecular interactions between PDT chromophores. The lifetime of the (TT) species varies from 40 ns to 1.5 μs, the latter of which is associated with extremely weak intermolecular coupling, sharp optical spectroscopic features, and complex TR-EPR spectra that are composed of a mixture of triplet and quintet-like features. On the other hand, more tightly coupled films produce broader transient optical spectra but simpler TR-EPR spectra consistent with significant population in 5(TT)0. These distinctions are rationalized through the role of exciton diffusion and predictions of TT state mixing with low exchange coupling J versus pure spin substate population with larger J. The connection between population evolution using electronic and spin spectroscopies enables assignments that provide a more detailed picture of triplet pair evolution than previously presented and provides critical guidance for designing molecular QIS systems based on light-induced spin coherence.
Collapse
|
11
|
Disentangling oxygen and water vapor effects on optoelectronic properties of monolayer tungsten disulfide. NANOSCALE 2020; 12:8344-8354. [PMID: 32236241 DOI: 10.1039/c9nr09326e] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
By understanding how the environmental composition impacts the optoelectronic properties of transition metal dichalcogenide monolayers, we demonstrate that simple photoluminescence (PL) measurements of tungsten disulfide (WS2) monolayers can differentiate relative humidity environments. In this paper, we examine the PL and photoconductivity of chemical vapor deposition grown WS2 monolayers under three carefully controlled environments: inert gas (N2), dry air (O2 in N2), and humid nitrogen (H2O vapor in N2). The WS2 PL is measured as a function of 532 nm laser power and exposure time and can be decomposed into the exciton, trion, and lower energy state(s) contributions. Under continuous illumination in either O2 or H2O vapor environment, we find dramatic (and reversible) increases in PL intensity relative to the PL in an inert environment. The PL bathochromically shifts in an O2 environment and is dominated by increased trion emission and diminished exciton emission. In contrast, the WS2 PL increase in a H2O environment results from an overall increase in emission from all spectral components where the exciton contribution dominates. The drastic increases in PL are anticorrelated with corresponding decreases in photoconductivity, as measured by time-resolved microwave conductivity. The results suggest that both O2 and H2O react photochemically with the WS2 monolayer surface, modifying the optoelectronic properties, but do so via distinct pathways. Thus, we use these optoelectronic differences to differentiate the amount of humidity in the air, which we show with 0%, 40%, and 80% relative humidity environments. This deeper understanding of how ambient conditions impact WS2 monolayers enables novel humidity sensors as well as a better understanding of the correlation between TMDC surface chemistry, light emission, and photoconductivity. Moreover, these WS2 measurements highlight the importance of considering the impact of the local environment on reported results.
Collapse
|
12
|
Measuring Photoexcited Free Charge Carriers in Mono- to Few-Layer Transition-Metal Dichalcogenides with Steady-State Microwave Conductivity. J Phys Chem Lett 2020; 11:99-107. [PMID: 31790587 DOI: 10.1021/acs.jpclett.9b03117] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
Photoinduced generation of mobile charge carriers is the fundamental process underlying many applications, such as solar energy harvesting, solar fuel production, and efficient photodetectors. Monolayer transition-metal dichalcogenides (TMDCs) are an attractive model system for studying photoinduced carrier generation mechanisms in low-dimensional materials because they possess strong direct band gap absorption, large exciton binding energies, and are only a few atoms thick. While a number of studies have observed charge generation in neat TMDCs for photoexcitation at, above, or even below the optical band gap, the role of nonlinear processes (resulting from high photon fluences), defect states, excess charges, and layer interactions remains unclear. In this study, we introduce steady-state microwave conductivity (SSMC) spectroscopy for measuring charge generation action spectra in a model WS2 mono- to few-layer TMDC system at fluences that coincide with the terrestrial solar flux. Despite utilizing photon fluences well below those used in previous pump-probe measurements, the SSMC technique is sensitive enough to easily resolve the photoconductivity spectrum arising in mono- to few-layer WS2. By correlating SSMC with other spectroscopy and microscopy experiments, we find that photoconductivity is observed predominantly for excitation wavelengths resonant with the excitonic transition of the multilayer portions of the sample, the density of which can be controlled by the synthesis conditions. These results highlight the potential of layer engineering as a route toward achieving high yields of photoinduced charge carriers in neat TMDCs, with implications for a broad range of optoelectronic applications.
Collapse
|
13
|
Carrier lifetimes of >1 μs in Sn-Pb perovskites enable efficient all-perovskite tandem solar cells. Science 2019; 364:475-479. [DOI: 10.1126/science.aav7911] [Citation(s) in RCA: 537] [Impact Index Per Article: 107.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/20/2018] [Revised: 02/15/2019] [Accepted: 04/08/2019] [Indexed: 12/20/2022]
Abstract
All-perovskite–based polycrystalline thin-film tandem solar cells have the potential to deliver efficiencies of >30%. However, the performance of all-perovskite–based tandem devices has been limited by the lack of high-efficiency, low–band gap tin-lead (Sn-Pb) mixed-perovskite solar cells (PSCs). We found that the addition of guanidinium thiocyanate (GuaSCN) resulted in marked improvements in the structural and optoelectronic properties of Sn-Pb mixed, low–band gap (~1.25 electron volt) perovskite films. The films have defect densities that are lower by a factor of 10, leading to carrier lifetimes of greater than 1 microsecond and diffusion lengths of 2.5 micrometers. These improved properties enable our demonstration of >20% efficient low–band gap PSCs. When combined with wider–band gap PSCs, we achieve 25% efficient four-terminal and 23.1% efficient two-terminal all-perovskite–based polycrystalline thin-film tandem solar cells.
Collapse
|
14
|
Enhanced Charge Transport in 2D Perovskites via Fluorination of Organic Cation. J Am Chem Soc 2019; 141:5972-5979. [DOI: 10.1021/jacs.9b00972] [Citation(s) in RCA: 198] [Impact Index Per Article: 39.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/15/2022]
|
15
|
Efficiency of Charge-Transfer Doping in Organic Semiconductors Probed with Quantitative Microwave and Direct-Current Conductance. J Phys Chem Lett 2018; 9:6864-6870. [PMID: 30457866 DOI: 10.1021/acs.jpclett.8b03074] [Citation(s) in RCA: 17] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 05/27/2023]
Abstract
Although molecular charge-transfer doping is widely used to manipulate carrier density in organic semiconductors, only a small fraction of charge carriers typically escape the Coulomb potential of dopant counterions to contribute to electrical conductivity. Here, we utilize microwave and direct-current (DC) measurements of electrical conductivity to demonstrate that a high percentage of charge carriers in redox-doped semiconducting single-walled carbon nanotube (s-SWCNT) networks is delocalized as a free carrier density in the π-electron system (estimated as >46% at high doping densities). The microwave and four-point probe conductivities of hole-doped s-SWCNT films quantitatively match over almost 4 orders of magnitude in conductance, indicating that both measurements are dominated by the same population of delocalized carriers. We address the relevance of this surprising one-to-one correspondence by discussing the degree to which local environmental parameters (e.g., tube-tube junctions, Coulombic stabilization, and local bonding environment) may impact the relative magnitudes of each transport measurement.
Collapse
|
16
|
The Role of the Side Chain on the Performance of N-type Conjugated Polymers in Aqueous Electrolytes. CHEMISTRY OF MATERIALS : A PUBLICATION OF THE AMERICAN CHEMICAL SOCIETY 2018; 30:2945-2953. [PMID: 29780208 PMCID: PMC5953566 DOI: 10.1021/acs.chemmater.8b00321] [Citation(s) in RCA: 104] [Impact Index Per Article: 17.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/23/2018] [Revised: 04/12/2018] [Indexed: 05/19/2023]
Abstract
We report a design strategy that allows the preparation of solution processable n-type materials from low boiling point solvents for organic electrochemical transistors (OECTs). The polymer backbone is based on NDI-T2 copolymers where a branched alkyl side chain is gradually exchanged for a linear ethylene glycol-based side chain. A series of random copolymers was prepared with glycol side chain percentages of 0, 10, 25, 50, 75, 90, and 100 with respect to the alkyl side chains. These were characterized to study the influence of the polar side chains on interaction with aqueous electrolytes, their electrochemical redox reactions, and performance in OECTs when operated in aqueous electrolytes. We observed that glycol side chain percentages of >50% are required to achieve volumetric charging, while lower glycol chain percentages show a mixed operation with high required voltages to allow for bulk charging of the organic semiconductor. A strong dependence of the electron mobility on the fraction of glycol chains was found for copolymers based on NDI-T2, with a significant drop as alkyl side chains are replaced by glycol side chains.
Collapse
|
17
|
Electronic Properties of Bimetallic Metal–Organic Frameworks (MOFs): Tailoring the Density of Electronic States through MOF Modularity. J Am Chem Soc 2017; 139:5201-5209. [DOI: 10.1021/jacs.7b01125] [Citation(s) in RCA: 134] [Impact Index Per Article: 19.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/19/2022]
|
18
|
Abstract
A series of covalent organic framework (COF) structures is synthesized that possesses a tunable density of covalently bound nitroxyl radicals within the COF pores. The highest density of organic radicals produces an electron paramagnetic resonance (EPR) signal that suggests the majority of radicals strongly interact with other radicals, whereas for smaller loadings the EPR signals indicate the radicals are primarily isolated but with restricted motion. The dielectric loss as determined from microwave absorption of the framework structures compared with an amorphous control suggests that free motion of the radicals is inhibited when more than 25% of available sites are occupied. The ability to tune the mode of radical interactions and the subsequent effect on redox, electrical, and optical characteristics in a porous framework may lead to a class of structures with properties ideal for photoelectrochemistry or energy storage.
Collapse
|
19
|
Probing Exciton Diffusion and Dissociation in Single-Walled Carbon Nanotube-C(60) Heterojunctions. J Phys Chem Lett 2016; 7:1794-1799. [PMID: 27127916 DOI: 10.1021/acs.jpclett.6b00604] [Citation(s) in RCA: 10] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
The efficiency of thin-film organic photovoltaic (OPV) devices relies heavily upon the transport of excitons to type-II heterojunction interfaces, where there is sufficient driving force for exciton dissociation and ultimately the formation of charge carriers. Semiconducting single-walled carbon nanotubes (SWCNTs) are strong near-infrared absorbers that form type-II heterojunctions with fullerenes such as C60. Although the efficiencies of SWCNT-fullerene OPV devices have climbed over the past few years, questions remain regarding the fundamental factors that currently limit their performance. In this study, we determine the exciton diffusion length in the C60 layer of SWCNT-C60 bilayer active layers using femtosecond transient absorption measurements. We demonstrate that hole transfer from photoexcited C60 molecules to SWCNTs can be tracked by the growth of narrow spectroscopic signatures of holes in the SWCNT "reporter layer". In bilayers with thick C60 layers, the SWCNT charge-related signatures display a slow rise over hundreds of picoseconds, reflecting exciton diffusion through the C60 layer to the interface. A model based on exciton diffusion with a Beer-Lambert excitation profile, as well as Monte Carlo simulations, gives the best fit to the data as a function of C60 layer thickness using an exciton diffusion length of approximately 5 nm.
Collapse
|
20
|
Photoconductivity of CdTe Nanocrystal-Based Thin Films: Te(2-) Ligands Lead To Charge Carrier Diffusion Lengths Over 2 μm. J Phys Chem Lett 2015; 6:4815-21. [PMID: 26571095 DOI: 10.1021/acs.jpclett.5b02252] [Citation(s) in RCA: 10] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 05/22/2023]
Abstract
We report on photoconductivity of films of CdTe nanocrystals (NCs) using time-resolved microwave photoconductivity (TRMC). Spherical and tetrapodal CdTe NCs with tunable size-dependent properties are studied as a function of surface ligand (including inorganic molecular chalcogenide species) and annealing temperature. Relatively high carrier mobility is measured for films of sintered tetrapod NCs (4 cm(2)/(V s)). Our TRMC findings show that Te(2-) capped CdTe NCs show a marked improvement in carrier mobility (11 cm(2)/(V s)), indicating that NC surface termination can be altered to play a crucial role in charge-carrier mobility even after the NC solids are sintered into bulk films.
Collapse
|
21
|
Photoinduced spontaneous free-carrier generation in semiconducting single-walled carbon nanotubes. Nat Commun 2015; 6:8809. [PMID: 26531728 PMCID: PMC4667683 DOI: 10.1038/ncomms9809] [Citation(s) in RCA: 46] [Impact Index Per Article: 5.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/01/2015] [Accepted: 10/06/2015] [Indexed: 02/08/2023] Open
Abstract
Strong quantum confinement and low dielectric screening impart single-walled carbon nanotubes with exciton-binding energies substantially exceeding kBT at room temperature. Despite these large binding energies, reported photoluminescence quantum yields are typically low and some studies suggest that photoexcitation of carbon nanotube excitonic transitions can produce free charge carriers. Here we report the direct measurement of long-lived free-carrier generation in chirality-pure, single-walled carbon nanotubes in a low dielectric solvent. Time-resolved microwave conductivity enables contactless and quantitative measurement of the real and imaginary photoconductance of individually suspended nanotubes. The conditions of the microwave conductivity measurement allow us to avoid the complications of most previous measurements of nanotube free-carrier generation, including tube-tube/tube-electrode contact, dielectric screening by nearby excitons and many-body interactions. Even at low photon fluence (approximately 0.05 excitons per μm length of tubes), we directly observe free carriers on excitation of the first and second carbon nanotube exciton transitions.
Collapse
|
22
|
Photoinduced Carrier Generation and Recombination Dynamics of a Trilayer Cascade Heterojunction Composed of Poly(3-hexylthiophene), Titanyl Phthalocyanine, and C60. J Phys Chem B 2015; 119:7729-39. [DOI: 10.1021/acs.jpcb.5b00110] [Citation(s) in RCA: 18] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
|
23
|
Control of polythiophene film microstructure and charge carrier dynamics through crystallization temperature. ACTA ACUST UNITED AC 2014. [DOI: 10.1002/polb.23471] [Citation(s) in RCA: 11] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
|
24
|
Submicrosecond time resolution atomic force microscopy for probing nanoscale dynamics. NANO LETTERS 2012; 12:893-898. [PMID: 22248070 DOI: 10.1021/nl203956q] [Citation(s) in RCA: 24] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/31/2023]
Abstract
We propose, simulate, and experimentally validate a new mechanical detection method to analyze atomic force microscopy (AFM) cantilever motion that enables noncontact discrimination of transient events with ~100 ns temporal resolution without the need for custom AFM probes, specialized instrumentation, or expensive add-on hardware. As an example application, we use the method to screen thermally annealed poly(3-hexylthiophene):phenyl-C(61)-butyric acid methyl ester photovoltaic devices under realistic testing conditions over a technologically relevant performance window. We show that variations in device efficiency and nanoscale transient charging behavior are correlated, thereby linking local dynamics with device behavior. We anticipate that this method will find application in scanning probe experiments of dynamic local mechanical, electronic, magnetic, and biophysical phenomena.
Collapse
|
25
|
The influence of solid-state microstructure on the origin and yield of long-lived photogenerated charge in neat semiconducting polymers. ACTA ACUST UNITED AC 2011. [DOI: 10.1002/polb.22379] [Citation(s) in RCA: 92] [Impact Index Per Article: 7.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/05/2022]
|
26
|
Concerted emission and local potentiometry of light-emitting electrochemical cells. ACS NANO 2010; 4:2673-2680. [PMID: 20423059 DOI: 10.1021/nn1003315] [Citation(s) in RCA: 21] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/29/2023]
Abstract
We study the operation of polymer light-emitting electrochemical cells (LECs) by combining scanning Kelvin probe microscopy with in situ imaging of the electroluminescence and photoluminescence on planar LECs. By combining these techniques on the same device in the same apparatus we directly map the relationship between the spatial distribution of electroluminescence and the local potential profile across the device. We find that the electroluminescence is always associated with a region of potential drop in LECs made with poly[2-methoxy-5-(3',7'-dimethyl-octyloxy)-p-phenylenevinylene] (MDMO-PPV), poly(ethylene oxide)(PEO), and potassium trifluoromethanesulfonate. Nevertheless, depending on the electrode metal used, we also find significant potential drops at or near the electrode/organic interfaces. We study the effects of using different electrodes and show that both the electroluminescence and potential profiles are strongly dependent on the electrode work function for thin junctions operated at low potentials. These results indicate injection barriers can affect the operation of LECs even in the presence of doping.
Collapse
|
27
|
Heterogeneity in polymer solar cells: local morphology and performance in organic photovoltaics studied with scanning probe microscopy. Acc Chem Res 2010; 43:612-20. [PMID: 20143815 DOI: 10.1021/ar900231q] [Citation(s) in RCA: 172] [Impact Index Per Article: 12.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Abstract
The use of organic photovoltaics (OPVs) could reduce production costs for solar cells because these materials are solution processable and can be manufactured by roll-to-roll printing. The nanoscale texture, or film morphology, of the donor/acceptor blends used in most OPVs is a critical variable that can dominate both the performance of new materials being optimized in the lab and efforts to move from laboratory-scale to factory-scale production. Although efficiencies of organic solar cells have improved significantly in recent years, progress in morphology optimization still occurs largely by trial and error, in part because much of our basic understanding of how nanoscale morphology affects the optoelectronic properties of these heterogeneous organic semiconductor films has to be inferred indirectly from macroscopic measurements. In this Account, we review the importance of nanoscale morphology in organic semiconductors and the use of electrical scanning probe microscopy techniques to directly probe the local optoelectronic properties of OPV devices. We have observed local heterogeneity of electronic properties and performance in a wide range of systems, including model polymer-fullerene blends such as poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl-C(61)-butyric acid methyl ester (PCBM), newer polyfluorene copolymer-PCBM blends, and even all polymer donor-acceptor blends. The observed heterogeneity in local photocurrent poses important questions, chiefly what information is contained and what is lost when using average values obtained from conventional measurements on macroscopic devices and bulk samples? We show that in many cases OPVs are best thought of as a collection of nanoscopic photodiodes connected in parallel, each with their own morphological and therefore electronic and optical properties. This local heterogeneity forces us to carefully consider the adequacy of describing OPVs solely by "average" properties such as the bulk carrier mobility. Characterizing this local heterogeneity in the morphology of an OPV and the consequent variations in local performance is vital to understanding OPV operation.
Collapse
|
28
|
Polymer nanowire/fullerene bulk heterojunction solar cells: how nanostructure determines photovoltaic properties. ACS NANO 2010; 4:1861-1872. [PMID: 20222697 DOI: 10.1021/nn9014906] [Citation(s) in RCA: 39] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/28/2023]
Abstract
We report studies of bulk heterojunction solar cells composed of self-assembled poly(3-butylthiophene) nanowires (P3BT-nw) as the donor component with a fullerene acceptor. We show that the nanostructure of these devices is the single most important variable determining their performance, and we use a combination of solvent and thermal annealing to control it. A combination of conductive and photoconductive atomic force microscopy provides direct connections between local nanostructure and overall device performance. Films with a dense random web of nanowires cause the fullerene to aggregate in the interstices, giving a quasi-ordered interpenetrating heterojunction with high short-circuit current density (10.58 mA/cm(2)), but relatively low open circuit voltage (520 mV). Films with a low density of nanowires result in a random bulk heterojunction composed of small crystalline PCBM and P3BT phases. Fewer nanowires result in higher open circuit voltage (650 mV) but lower current density (6.02 mA/cm(2)). An average power conversion efficiency of 3.35% was achieved in a structure which balances these factors, with intermediate nanowire density. The best photovoltaic performance would be realized in a material structure which maintains the interpenetrating network of nanowires and fullerene phases (high current density), but avoids the device bridging we observe, and the recombination and shunt losses associated with it (high open-circuit voltage).
Collapse
|
29
|
Imaging the evolution of nanoscale photocurrent collection and transport networks during annealing of polythiophene/fullerene solar cells. NANO LETTERS 2009; 9:2946-52. [PMID: 19588929 DOI: 10.1021/nl901358v] [Citation(s) in RCA: 17] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/08/2023]
Abstract
We use photoconductive atomic force microscopy to image nanoscale spatial variations in photocurrent across the surfaces of photovoltaic cells made from blends of the conjugated polymer regioregular poly(3-hexylthiopene) (P3HT) with phenyl-C(61)-butyric acid methyl ester (PCBM). We study how the spatial variations in photocurrent evolve with thermal annealing, and we correlate these changes with the evolution of macroscopic film and device properties such as external quantum efficiency and carrier mobility. We use conductive atomic force microscopy to examine the development of injection and transport networks for both electrons and holes as a function of annealing. We find that the hole transport, electron transport, and photocurrent collection networks become increasingly heterogeneous with thermal annealing and remain heterogeneous on the 10-100 nm length scale even in the most efficient P3HT/PCBM devices. After annealing, the regions of the greatest dark hole currents, greatest dark electron currents, and greatest photocurrents are each associated with different regions of the nanostructured films. These results suggest spatial heterogeneity can contribute to the imperfect internal quantum efficiency even in relatively efficient organic photovoltaics and that fully 3D modeling is needed to describe the devices physics of polymer blend solar cells.
Collapse
|
30
|
Space charge limited current measurements on conjugated polymer films using conductive atomic force microscopy. NANO LETTERS 2008; 8:1602-9. [PMID: 18447400 DOI: 10.1021/nl080155l] [Citation(s) in RCA: 41] [Impact Index Per Article: 2.6] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/08/2023]
Abstract
We describe local (~150 nm resolution), quantitative measurements of charge carrier mobility in conjugated polymer films that are commonly used in thin-film transistors and nanostructured solar cells. We measure space charge limited currents (SCLC) through these films using conductive atomic force microscopy (c-AFM) and in macroscopic diodes. The current densities we measure with c-AFM are substantially higher than those observed in planar devices at the same bias. This leads to an overestimation of carrier mobility by up to 3 orders of magnitude when using the standard Mott-Gurney law to fit the c-AFM data. We reconcile this apparent discrepancy between c-AFM and planar device measurements by accounting for the proper tip-sample geometry using finite element simulations of tip-sample currents. We show that a semiempirical scaling factor based on the ratio of the tip contact area diameter to the sample thickness can be used to correct c-AFM current-voltage curves and thus extract mobilities that are in good agreement with values measured in the conventional planar device geometry.
Collapse
|
31
|
Mapping local photocurrents in polymer/fullerene solar cells with photoconductive atomic force microscopy. NANO LETTERS 2007; 7:738-44. [PMID: 17295549 DOI: 10.1021/nl062989e] [Citation(s) in RCA: 123] [Impact Index Per Article: 7.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/13/2023]
Abstract
The performance of organic solar cells is highly dependent on film morphology. However, directly correlating local film structures with device performance remains challenging. We demonstrate that photoconductive atomic force microscopy (pcAFM) can be used to map local photocurrents with 20 nm resolution in donor/acceptor blend solar cells of the conjugated polymer poly[2-methoxy-5-(3',7'-dimethyloctyl-oxy)-1,4-phenylene vinylene] (MDMO-PPV) with the fullerene (6,6)-phenyl-C61-butyric acid methyl ester (PCBM) spin-coated from various solvents. We present photocurrent maps under short-circuit conditions (zero applied bias) as well as under various applied voltages. We find significant variation in the short-circuit current between regions that appear identical in AFM topography. These variations occur from one domain to another as well as on larger length scales incorporating multiple domains. These results suggest that the performance of polymer-fullerene blends can still be improved through better control of morphology.
Collapse
|