In Situ Labeling of the Aqueous Compartment of Extracellular Vesicles with Luminescent Gold Nanoclusters

Extracellular vesicles (EVs) are well-known membrane-limited particles secreted by both healthy and cancerous cells. They are considered as biomarkers for early cancer diagnosis and are involved in many pathologies and physiological pathways. They could serve as diagnostic tools in liquid biopsies, as therapeutics in regenerative medicine, or as drug delivery vehicles. Our aim is here to encapsulate luminescent nanoprobes in the aqueous compartment of human EVs extracted from reproductive fluids. The analysis and labeling of the EVs content with easily detectable luminescent nanoparticles could enable a powerful tool for early diagnosis of specific diseases and also for the design of new therapeutics. In this view, gold nanoclusters (AuNCs) appear as an attractive alternative as nontoxic fluorophore probes because of their luminescence properties, large window of fluorescence lifetimes (1 ns-1 μs), ultrasmall size (<2 nm), good biocompatibility, and specific ability as X-ray photosensitizers. Here, we investigated an attractive method that uses fusogenic liposomes to deliver gold nanoclusters into EVs. This approach guarantees the preservation of the EVs membrane without any breakage, thus maintaining compartmental integrity. Different lipid compositions of liposomes preloaded with AuNCs were selected to interact electrostatically with human EVs and compared in terms of fusion efficiency. The mixture of liposomes and EVs results in membrane mixing as demonstrated by FRET experiments and fusion revealed by flux cytometry and cryo-TEM. The resulting fused EVs exhibit typical fluorescence of the AuNCs together with an increased size in agreement with fusion. Moreover, the fusion events in mixtures of EVs and AuNCs preloaded liposomes were analyzed by using cryo-electron microscopy. Finally, the ratio of released AuNCs during the fusion between the fusogenic liposomes and the EVs was estimated to be less than 20 mol % by Au titration using ICP spectroscopy.

Encapsulation of Luminescent Gold Nanoclusters into Synthetic Vesicles

Gold nanoclusters (Au NCs) are attractive luminescent nanoprobes for biomedical applications. In vivo biosensing and bioimaging requires the delivery of the Au NCs into subcellular compartments. In this view, we explore here the possible encapsulation of ultra-small-sized red and blue emitting Au NCs into liposomes of various sizes and chemical compositions. Different methods were investigated to prepare vesicles containing Au NCs in their lumen. The efficiency of the process was correlated to the structural and morphological aspect of the Au NCs' encapsulating vesicles thanks to complementary analyses by SAXS, cryo-TEM, and confocal microscopy techniques. Cell-like-sized vesicles (GUVs) encapsulating red or blue Au NCs were successfully obtained by an innovative method using emulsion phase transfer. Furthermore, exosome-like-sized vesicles (LUVs) containing Au NCs were obtained with an encapsulation yield of 40%, as estimated from ICP-MS.

Luminescent Gold Nanoclusters Interacting with Synthetic and Biological Vesicles

According to their high electron density and ultrasmall size, gold nanoclusters (AuNCs) have unique luminescence and photoelectrochemical properties that make them very attractive for various biomedical fields. These applications require a clear understanding of their interaction with biological membranes. Here we demonstrate the ability of the AuNCs as markers for lipidic bilayer structures such as synthetic liposomes and biological extracellular vesicles (EVs). The AuNCs can selectively interact with liposomes or EVs through an attractive electrostatic interaction as demonstrated by zetametry and fluorescence microscopy. According to the ratio of nanoclusters to vesicles, the lipidic membranes can be fluorescently labeled without altering their thickness until charge reversion, the AuNCs being located at the level of the phosphate headgroups. In presence of an excess of AuNCs, the vesicles tend to adhere and aggregate. The strong adsorption of AuNCs results in the formation of a lamellar phase as demonstrated by cryo-transmission electron microscopy and small-angle X-ray scattering techniques.

Extra-cellular vesicles of the male genital tract: new actors in male fertility?

Extracellular Vesicles (EVs) are membrane-limited particles containing proteins, lipids, metabolites and nucleic acids that are secreted by healthy and cancerous cells. These vesicles are very heterogeneous in size and content and mediate a variety of biological functions. Three subtypes of EV have been described in the male genital tract: microvesicles, myelinosomes and exosomes. Each type of EVs depends on the location of secretion such as the testis, prostate or epididymis. It has been shown that EVs can fuse together and deliver information to recipient cells, for example spermatozoa in the male genital tract. Cryo-electron microscopy remains the reference technique for determining EV morphology, but quantifying the absolute concentration of these EVs in biological fluids remains a challenge from a clinical point of view. The field of bio detection has considerably increased with the introduction of nanomaterials in biosensors and will provide a better understanding of the impact of these EVs. However, functional modifications of male gametes result from interactions with the components of the intraluminal fluid all along the genital tract and depend on the secretion and absorption of proteins and lipids from the local microenvironment. We cannot therefore exclude the possibility of epigenetic modulation of the information that will be transmitted to the embryo and therefore to the next generation via EVs.

Hybrid gold nanoparticle-quantum dot self-assembled nanostructures driven by complementary artificial proteins

Hybrid nanostructures are constructed by the direct coupling of fluorescent quantum dots and plasmonic gold nanoparticles. Self-assembly is directed by the strong affinity between two artificial α-repeat proteins that are introduced in the capping layers of the nanoparticles at a controlled surface density. The proteins have been engineered to exhibit a high mutual affinity, corresponding to a dissociation constant in the nanomolar range, towards the protein-functionalized quantum dots and gold nanoparticles. Protein-mediated self-assembly is evidenced by surface plasmon resonance and gel electrophoresis. The size and the structure of colloidal superstructures of complementary nanoparticles are analyzed by transmission electron microscopy and small angle X-ray scattering. The size of the superstructures is determined by the number of proteins per nanoparticle. The well-defined geometry of the rigid protein complex sets a highly uniform interparticle distance of 8 nm that affects the emission properties of the quantum dots in the hybrid ensembles. Our results open the route to the design of hybrid emitter-plasmon colloidal assemblies with controlled near-field coupling and better optical response.

Photo-electrochemical properties of quantum rods studied by scanning electrochemical microscopy

Scanning electrochemical microscopy (SECM) is used for studying the intrinsic photo-electrochemical properties of CdSe/CdS quantum rods.

An aqueous one-pot route to gold/quantum rod heterostructured nanoparticles functionalized with DNA

We report an original approach exploiting the photoelectrochemical properties of quantum rods and the versatility of Au(I) organometallic chemistry to control DNA surface grafting. This one-pot aqueous approach provides Janus biofunctionalized nanoparticles, the assembly of which should results in the emergence of synergistic properties.

Synthesis and enzymatic photo-activity of an O2 tolerant hydrogenase-CdSe@CdS quantum rod bioconjugate

This communication reports on the preparation of stable and photo-active nano-heterostructures composed of O2 tolerant [NiFe] hydrogenase extracted from the Aquifex aeolicus bacterium grafted onto hydrophilic CdSe/CdS quantum rods in view of the development of H2/O2 biofuel cells. The resulting complex is efficient towards H2 oxidation, displays good stability and new photosensitive properties.

Peptidic ligands to control the three-dimensional self-assembly of quantum rods in aqueous media

The use of peptidic ligands is validated as a generic chemical platform allowing one to finely control the organization in solid phase of semiconductor nanorods originally dispersed in an aqueous media. An original method to generate, on a macroscopic scale and with the desired geometry, three-dimensional supracrystals composed of quantum rods is introduced. In a first step, nanorods are transferred in an aqueous phase thanks to the substitution of the original capping layer by peptidic ligands. Infrared and nuclear magnetic resonance spectroscopy data prove that the exchange is complete; fluorescence spectroscopy demonstrates that the emitter optical properties are not significantly altered; electrophoresis and dynamic light scattering experiments assess the good colloidal stability of the resulting aqueous suspension. In a second step, water evaporation in a microstructured environment yields superstructures with a chosen geometry and in which nanorods obey a smectic B arrangement, as shown by electron microscopy. Incidentally, bulk drying in a capillary tube generates a similar local order, as evidenced by small angle X-ray scattering.

Replacement of CTAB with peptidic ligands at the surface of gold nanorods and their self-assembling properties

Herein, we describe the self-assembling of gold nanorods (GNRs) induced during the ligand exchange at their surface. An exchange reaction between tricysteine PEGylated peptidic ligands and cetyltrimethylammonium bromide (CTAB)-protected gold nanorods is conducted. We demonstrated that the terminal group charge (positively or negatively charged) and the hydrophobicity of the peptidic ligands (bearing or not an undecanoyl chain) strongly affects the self-organization of the GNRs occurring in solution. Adjusting the amount of short PEGylated peptides causes a self-organization of the gold nanorods in solution, resulting in a red- or blue-shift of the plasmon bands. The decrease of their surface charge and the self-assembling in solution were first shown by zetametry, by Dynamic Light Scattering and UV-spectroscopy. Thanks to Small Angle X-ray Scattering experiments and Transmission Electron Microscopy images, the self-organization of the nanorods in solution was clearly demonstrated and correlated to the spectroscopic change in absorbance. Conversely, in the case of longer PEGylated peptidic ligands including an undecanoyl chain, the GNRs are particularly stable against aggregation for several days after purification. By controlled drying on a substrate, we showed their ability to self-organize into well-defined ordered structures making them very attractive as building blocks to design optical materials.

Three-dimensional self-assembling of gold nanorods with controlled macroscopic shape and local smectic B order

We describe a method of controlled evaporation on a textured substrate for self-assembling and shaping gold-nanorod-based materials. Tridimensional wall features are formed over areas as large as several square millimeters. Furthermore, analyses by small-angle X-ray scattering and scanning electron microscopy techniques demonstrate that colloids are locally ordered as a smectic B phase. Such crystallization is in fact possible because we could finely adjust the nanoparticle charge, knowledge that additionally enables tuning the lattice parameters. In the future, the type of ordered self-assemblies of gold nanorods we have prepared could be used for amplifying optical signals.

Structural characterization of zinc and iron (II/III) complexes of a porphyrin bearing two built-in nitrogen bases. An example of high-spin diaqua-iron(III) bromo complex

A bis-strapped porphyrin with two intramolecular nitrogen bases was synthesized, and its zinc(II), iron(II), and iron(III) complexes have been structurally characterized. Whereas the zinc(II) complex is square pyramidal five-coordinate and the iron(II) complex is six-coordinate despite a significant distortion of the macrocycle induced by the rigidity of the straps, the iron(III) complex exhibits a peculiar bis-aqua structure in which no intramolecular axial base is bound to the iron atom in the porphyrin. Furthermore, on one side, the bromide counteranion of the iron is bound inside the cycle formed by a strap and establishes a hydrogen bond with an axially bound water molecule. On the other side, a residual HBr molecule protonates one pyridine base leading to the formation of an intermolecular pyridinium-pyridine hydrogen bond. The large ionic radius of the high-spin iron(III) cation is accommodated in the macrocycle with no displacement of the metal out of the mean porphyrinic plane, with an average Fe-Np bond distance of 2.057 A, and the axial Fe-Ow(aqua) bond distance measured at 2.090 A. As a result, this high-spin iron(III) bis-aqua complex is only lightly distorted.