The making of a potent L-lactate transport inhibitor

L-lactate is an important metabolite, energy source, and signaling molecule in health and disease. In mammals, its transport across biological membranes is mediated by monocarboxylate transporters (MCTs) of the solute carrier 16 (SLC16) family. Malfunction, overexpression or absence of transporters of this family are associated with diseases such as cancer and type 2 diabetes. Moreover, lactate acts as a signaling molecule and virulence factor in certain bacterial infections. Here, we report the rational, structure-guided identification of potent, nanomolar affinity inhibitors acting on an L-lactate-specific SLC16 homologue from the bacterium Syntrophobacter fumaroxidans (SfMCT). High-resolution crystal structures of SfMCT with bound inhibitors uncovered their interaction mechanism on an atomic level and the role of water molecules in inhibitor binding. The presented systematic approach is a valuable procedure for the identification of L-lactate transport inhibitors. Furthermore, identified inhibitors represent potential tool compounds to interfere with monocarboxylate transport across biological membranes mediated by MCTs.

The Heavy Chain 4F2hc Modulates the Substrate Affinity and Specificity of the Light Chains LAT1 and LAT2

The human L-type amino acid transporters LAT1 and LAT2 mediate the transport of amino acids and amino acid derivatives across plasma membranes in a sodium-independent, obligatory antiport mode. In mammalian cells, LAT1 and LAT2 associate with the type-II membrane N-glycoprotein 4F2hc to form heteromeric amino acid transporters (HATs). The glycosylated ancillary protein 4F2hc is known to be important for successful trafficking of the unglycosylated transporters to the plasma membrane. The heavy (i.e., 4F2hc) and light (i.e., LAT1 and LAT2) chains belong to the solute carrier (SLC) families SLC3 and SLC7, and are covalently linked by a conserved disulfide bridge. Overexpression, absence, or malfunction of certain HATs is associated with human diseases and HATs are therefore considered therapeutic targets. Here, we present a comparative, functional characterization of the HATs 4F2hc-LAT1 and 4F2hc-LAT2, and their light chains LAT1 and LAT2. For this purpose, the HATs and the light chains were expressed in the methylotrophic yeast Pichia pastoris and a radiolabel transport assay was established. Importantly and in contrast to mammalian cells, P. pastoris has proven useful as eukaryotic expression system to successfully express human LAT1 and LAT2 in the plasma membrane without the requirement of co-expressed trafficking chaperone 4F2hc. Our results show a novel function of the heavy chain 4F2hc that impacts transport by modulating the substrate affinity and specificity of corresponding LATs. In addition, the presented data confirm that the light chains LAT1 and LAT2 constitute the substrate-transporting subunits of the HATs, and that light chains are also functional in the absence of the ancillary protein 4F2hc.

A procedure and double-chambered device for macromolecular crystal flash-cooling in different cryogenic liquids

Flash-cooling of macromolecular crystals for X-ray diffraction analysis is usually performed in liquid nitrogen (LN2). Cryogens different than LN2 are used as well for this procedure but are highly underrepresented, e.g., liquid propane and liquid ethane. These two cryogens have significantly higher cooling rates compared with LN2 and may thus be beneficial for flash-cooling of macromolecular crystals. Flash-cooling in liquid propane or liquid ethane results in sample vitrification but is accompanied by solidification of these cryogens, which is not compatible with the robotic systems nowadays used for crystal mounting at most synchrotrons. Here we provide a detailed description of a new double-chambered device and procedure to flash-cool loop mounted macromolecular crystals in different cryogenic liquids. The usage of this device may result in specimens of better crystal- and optical quality in terms of mosaic spread and ice contamination. Furthermore, applying the described procedure with the new double-chambered device provides the possibility to screen for the best flash-cooling cryogen for macromolecular crystals on a routine basis, and, most importantly, the samples obtained allow the usage of state-of-the-art robotic sample-loading systems at synchrotrons.

SLC16 Family: From Atomic Structure to Human Disease

The solute carrier 16 (SLC16) family represents a diverse group of membrane proteins mediating the transport of monocarboxylates across biological membranes. Family members show a variety of functional roles ranging from nutrient transport and intracellular pH regulation to thyroid hormone homeostasis. Changes in the expression levels and transport function of certain SLC16 transporters are manifested in severe health disorders including cancer, diabetes, and neurological disorders. L-Lactate-transporting SLC16 family members play essential roles in the metabolism of certain tumors and became validated drug targets. This review illuminates the SLC16 family under a new light using structural information obtained from a SLC16 homolog. Furthermore, the role of these transporters in cancer metabolism and how their inhibition can contribute to anticancer therapy are discussed.

Structure and function of a monocarboxylate transporter homolog specific for L-lactate

Monocarboxylate transporters play important roles in certain cancers. We have reported structures of an L-lactate-transporting solute carrier family 16 homolog with bound substrate and inhibitor. The structures show the transporter in the pharmacologically relevant outward-open conformation. Structure–function analysis provides insights into the molecular working mechanisms of ligand binding and L-lactate transport.

Mechanistic basis of L-lactate transport in the SLC16 solute carrier family

In human and other mammalian cells, transport of L-lactate across plasma membranes is mainly catalyzed by monocarboxylate transporters (MCTs) of the SLC16 solute carrier family. MCTs play an important role in cancer metabolism and are promising targets for tumor treatment. Here, we report the crystal structures of an SLC16 family homologue with two different bound ligands at 2.54 and 2.69 Å resolution. The structures show the transporter in the pharmacologically relevant outward-open conformation. Structural information together with a detailed structure-based analysis of the transport function provide important insights into the molecular working mechanisms of ligand binding and L-lactate transport.

The transport of L-lactate across plasma membranes is catalyzed by proton-driven monocarboxylate transporters (MCTs) of the SLC16 solute carrier family. Here, the authors present the crystal structures of a bacterial SLC16 homologue with the bound substrate L-lactate and ligand thiosalicylate both in an outward-open conformation and discuss the L-lactate transport mechanism.

Secondary Active Transporters

Transport of solutes across biological membranes is essential for cellular life. This process is mediated by membrane transport proteins which move nutrients, waste products, certain drugs and ions into and out of cells. Secondary active transporters couple the transport of substrates against their concentration gradients with the transport of other solutes down their concentration gradients. The alternating access model of membrane transporters and the coupling mechanism of secondary active transporters are introduced in this book chapter. Structural studies have identified typical protein folds for transporters that we exemplify by the major facilitator superfamily (MFS) and LeuT folds. Finally, substrate binding and substrate translocation of the transporters LacY of the MFS and AdiC of the amino acid-polyamine-organocation (APC) superfamily are described.

High-resolution atomic force microscopy imaging of rhodopsin in rod outer segment disk membranes

Atomic force microscopy (AFM) is a powerful imaging technique that allows recording topographical information of membrane proteins under near-physiological conditions. Remarkable results have been obtained on membrane proteins that were reconstituted into lipid bilayers. High-resolution AFM imaging of native disk membranes from vertebrate rod outer segments has unveiled the higher-order oligomeric state of the G protein-coupled receptor rhodopsin, which is highly expressed in disk membranes. Based on AFM imaging, it has been demonstrated that rhodopsin assembles in rows of dimers and paracrystals and that the rhodopsin dimer is the fundamental building block of higher-order structures.

The transmembrane protein KpOmpA anchoring the outer membrane of Klebsiella pneumoniae unfolds and refolds in response to tensile load

In Klebsiella pneumoniae the transmembrane β-barrel forming outer membrane protein KpOmpA mediates adhesion to a wide range of immune effector cells, thereby promoting respiratory tract and urinary infections. As major transmembrane protein OmpA stabilizes Gram-negative bacteria by anchoring their outer membrane to the peptidoglycan layer. Adhesion, osmotic pressure, hydrodynamic flow, and structural deformation apply mechanical stress to the bacterium. This stress can generate tensile load to the peptidoglycan-binding domain (PGBD) of KpOmpA. To investigate how KpOmpA reacts to mechanical stress, we applied a tensile load to the PGBD and observed a detailed unfolding pathway of the transmembrane β-barrel. Each step of the unfolding pathway extended the polypeptide connecting the bacterial outer membrane to the peptidoglycan layer and absorbed mechanical energy. After relieving the tensile load, KpOmpA reversibly refolded back into the membrane. These results suggest that bacteria may reversibly unfold transmembrane proteins in response to mechanical stress.

Single-molecule force spectroscopy from nanodiscs: an assay to quantify folding, stability, and interactions of native membrane proteins

Single-molecule force spectroscopy (SMFS) can quantify and localize inter- and intramolecular interactions that determine the folding, stability, and functional state of membrane proteins. To conduct SMFS the membranes embedding the membrane proteins must be imaged and localized in a rather time-consuming manner. Toward simplifying the investigation of membrane proteins by SMFS, we reconstituted the light-driven proton pump bacteriorhodopsin into lipid nanodiscs. The advantage of using nanodiscs is that membrane proteins can be handled like water-soluble proteins and characterized with similar ease. SMFS characterization of bacteriorhodopsin in native purple membranes and in nanodiscs reveals no significant alterations of structure, function, unfolding intermediates, and strengths of inter- and intramolecular interactions. This demonstrates that lipid nanodiscs provide a unique approach for in vitro studies of native membrane proteins using SMFS and open an avenue to characterize membrane proteins by a wide variety of SMFS approaches that have been established on water-soluble proteins.

High-throughput single-molecule force spectroscopy for membrane proteins

Atomic force microscopy-based single-molecule force spectroscopy (SMFS) is a powerful tool for studying the mechanical properties, intermolecular and intramolecular interactions, unfolding pathways, and energy landscapes of membrane proteins. One limiting factor for the large-scale applicability of SMFS on membrane proteins is its low efficiency in data acquisition. We have developed a semi-automated high-throughput SMFS (HT-SMFS) procedure for efficient data acquisition. In addition, we present a coarse filter to efficiently extract protein unfolding events from large data sets. The HT-SMFS procedure and the coarse filter were validated using the proton pump bacteriorhodopsin (BR) from Halobacterium salinarum and the L-arginine/agmatine antiporter AdiC from the bacterium Escherichia coli. To screen for molecular interactions between AdiC and its substrates, we recorded data sets in the absence and in the presence of L-arginine, D-arginine, and agmatine. Altogether ∼400 000 force-distance curves were recorded. Application of coarse filtering to this wealth of data yielded six data sets with ∼200 (AdiC) and ∼400 (BR) force-distance spectra in each. Importantly, the raw data for most of these data sets were acquired in one to two days, opening new perspectives for HT-SMFS applications.

Conductive supports for combined AFM-SECM on biological membranes

Four different conductive supports are analysed regarding their suitability for combined atomic force and scanning electrochemical microscopy (AFM-SECM) on biological membranes. Highly oriented pyrolytic graphite (HOPG), MoS(2), template stripped gold, and template stripped platinum are compared as supports for high resolution imaging of reconstituted membrane proteins or native membranes, and as electrodes for transferring electrons from or to a redox molecule. We demonstrate that high resolution topographs of the bacterial outer membrane protein F can be recorded by contact mode AFM on all four supports. Electrochemical feedback experiments with conductive cantilevers that feature nanometre-scale electrodes showed fast re-oxidation of the redox couple Ru(NH(3))(6)(3+/2+) with the two metal supports after prolonged immersion in electrolyte. In contrast, the re-oxidation rates decayed quickly to unpractical levels with HOPG or MoS(2) under physiological conditions. On HOPG we observed heterogeneity in the re-oxidation rate of the redox molecules with higher feedback currents at step edges. The latter results demonstrate the capability of conductive cantilevers with small electrodes to measure minor variations in an SECM signal and to relate them to nanometre-scale features in a simultaneously recorded AFM topography. Rapid decay of re-oxidation rate and surface heterogeneity make HOPG or MoS(2) less attractive for combined AFM-SECM experiments on biological membranes than template stripped gold or platinum supports.