Effect of heavy chain signal peptide mutations and NH2-terminal chain length on binding of anti-digoxin antibodies

In certain instances, antibody variable region mutations outside of the antigen-combining site influence antigen binding. We reported previously that a heavy chain mutation (Ser-94-->Arg) decreased binding of the anti-digoxin antibody 40-150, whereas an additional signal peptide mutation at the -2 position (Gln-->Pro) causing NH2-terminal 2-residue truncation partially restored binding. To assess the combined effects on binding of two seemingly distant mutations, we constructed signal peptide mutations and NH2-terminal deletions in the presence of Ser-94 and Arg-94. Deletions of one to three amino acids had little effect on binding for Ser-94 mutants, whereas 2-residue truncations produced directly or by signal peptide mutation increased affinity approximately 40-fold for Arg-94 mutants. These observations are consistent with the reported computer-generated model of antibody 40-150. Introduction of Pro at the signal peptide -3 position in 40-150 resulted in cleavage at alternative sites, with varying effects on affinity. Introduction of Pro at -2 into the anti-digoxin antibody 26-10 resulted, unexpectedly, in expression of heavy chains with 3 extra NH2-terminal residues, causing an approximately 100-fold reduction in affinity. Thus, both extensions and deletions of the heavy chain amino terminus can enhance or reduce antigen binding, depending on the structural context of specific antigen combining sites.

Characterization of an anti-digoxin antibody binding site by site-directed in vitro mutagenesis

In vitro mutagenesis and immunoglobulin gene transfection were used to investigate the binding site of a monoclonal antibody, 2610, that binds to digoxin, a cardiac glycoside. A computer model was generated in order to select sites in the complementarity determining regions (CDR) that would participate in binding. Residues in the CDR segments were chosen that possess high solvent exposure and were located in a putative cleft. The cloned heavy and light chain variable regions were subjected to in vitro mutagenesis at these sites. The mutated variable regions in M13 were then subcloned into expression vectors and transfected. The affinities and specificity binding properties of the resultant expressed antibodies were measured. Many of the mutants of the putative contact residues showed significant but not major alterations of binding properties. Since most of the residues in the binding site are non-polar and aromatic and since many of the mutations resulted in only modest binding changes, we theorize that much of the high affinity binding (> 10(9)/M) is the cumulation of many weak interactions, arising from dispersion forces and hydrophobic effects in the pocket. Preliminary mutagenesis of two L chain positions proposed to bind to the lactone end of digoxin have larger binding effects. Specificity studies show that the mutants more frequently possess altered binding to the lactone ring of digoxin that altered binding to other digoxin moieties. The data are most suggestive of a model in which lactone is at the bottom of a binding pocket, followed by the steroid nucleus and then by the sugar moiety extruding out of the pocket. The binding information may be useful in understanding the immune response to large, hydrophobic haptens.

The specificity properties that distinguish members of a set of homologous anti-digoxin antibodies are controlled by H chain mutations

Five murine A/J strain anti-digoxin mAb (35-20, 40-40, 40-120, 40-140, and 40-160) have highly homologous H and L chain V regions, only differing by somatic mutation, yet differ in affinity and specificity. The availability of the VH and VL genomic clones from one hybridoma, 40-140, has now allowed studies involving in vitro mutagenesis and chain recombination among these five hybridomas. To determine the relative contributions of the mutations found in either VH or VL to the overall binding properties of these antibodies, we recombined the 40-140VH with the VL of each hybridoma. The 40-140VH gene was transfected into hybridoma variants that produce only VL. The recombinant antibodies show that the mutations present in VH, rather than in VL, affect the fine specificity properties of these antibodies, whereas, the mutations among both VH and VL chains are important in determining antigen affinity. From mutations present in VH that affect fine specificity properties, the comparison of the antibody sequences, and from the previously measured binding properties, we predicted and tested selected VH mutations for their ability to alter specificity or affinity by doing site-directed in vitro mutagenesis. The results for the somatic mutations found in this group of antibodies show: 1) VH mutations control the fine specificity properties that distinguish different members of this group; 2) in particular, VH residues 54 and 55 in CDR2 control the distinguishing characteristics of specificities between these antibodies; and 3) by mutagenesis, we had the unusual result of being able to alter Ag specificity without affecting affinity. A computer model of the 40-140 antibody binding site was generated which indicates that VH residues 54 and 55 are highly accessible.

The specificity properties that distinguish members of a set of homologous anti-digoxin antibodies are controlled by H chain mutations

Five murine A/J strain anti-digoxin mAb (35-20, 40-40, 40-120, 40-140, and 40-160) have highly homologous H and L chain V regions, only differing by somatic mutation, yet differ in affinity and specificity. The availability of the VH and VL genomic clones from one hybridoma, 40-140, has now allowed studies involving in vitro mutagenesis and chain recombination among these five hybridomas. To determine the relative contributions of the mutations found in either VH or VL to the overall binding properties of these antibodies, we recombined the 40-140VH with the VL of each hybridoma. The 40-140VH gene was transfected into hybridoma variants that produce only VL. The recombinant antibodies show that the mutations present in VH, rather than in VL, affect the fine specificity properties of these antibodies, whereas, the mutations among both VH and VL chains are important in determining antigen affinity. From mutations present in VH that affect fine specificity properties, the comparison of the antibody sequences, and from the previously measured binding properties, we predicted and tested selected VH mutations for their ability to alter specificity or affinity by doing site-directed in vitro mutagenesis. The results for the somatic mutations found in this group of antibodies show: 1) VH mutations control the fine specificity properties that distinguish different members of this group; 2) in particular, VH residues 54 and 55 in CDR2 control the distinguishing characteristics of specificities between these antibodies; and 3) by mutagenesis, we had the unusual result of being able to alter Ag specificity without affecting affinity. A computer model of the 40-140 antibody binding site was generated which indicates that VH residues 54 and 55 are highly accessible.

Domain association in immunoglobulin molecules. The packing of variable domains

We have analyzed the structure of the interface between VL and VH domains in three immunoglobulin fragments: Fab KOL, Fab NEW and Fab MCPC 603. About 1800 A2 of protein surface is buried between the domains. Approximately three quarters of this interface is formed by the packing of the VL and VH beta-sheets in the conserved "framework" and one quarter from contacts between the hypervariable regions. The beta-sheets that form the interface have edge strands that are strongly twisted (coiled) by beta-bulges. As a result, the edge strands fold back over their own beta-sheet at two diagonally opposite corners. When the VL and VH domains pack together, residues from these edge strands form the central part of the interface and give what we call a three-layer packing; i.e. there is a third layer composed of side-chains inserted between the two backbone side-chain layers that are usually in contact. This three-layer packing is different from previously described beta-sheet packings. The 12 residues that form the central part of the three observed VL-VH packings are absolutely or very strongly conserved in all immunoglobulin sequences. This strongly suggests that the structure described here is a general model for the association of VL and VH domains and that the three-layer packing plays a central role in forming the antibody combining site.

An analysis of incorrectly folded protein models. Implications for structure predictions

Proteins with homologous amino acid sequences have similar folds and it has been assumed that an unknown three-dimensional structure can be obtained from a known homologous structure by substituting new side-chains into the polypeptide chain backbone, followed by relatively small adjustment of the model. To examine this approach of structure prediction and, more generally, to isolate the characteristics of native proteins, we constructed two incorrectly folded protein models. Sea-worm hemerythrin and the variable domain of mouse immunoglobulin K-chain, two proteins with no sequence homology, were chosen for study; the former is composed of a bundle of four alpha-helices and the latter consists of two 4-stranded beta-sheets. Using an automatic computer procedure, hemerythrin side-chains were substituted into the immunoglobulin domain and vice versa. The structures were energy-minimized with the program CHARMM and the resulting structures compared with the correctly folded forms. It was found that the incorrect side-chains can be incorporated readily into both types of structures (alpha-helices, beta-sheets) with only small structural adjustments. After constrained energy-minimization, which led to an average atomic co-ordinate shift of no more than 0.7 to 0.9 A, the incorrectly folded models arrived at potential energy values comparable to those of the correct structures. Detailed analysis of the energy results shows that the incorrect structures have less stabilizing electrostatic, van der Waals' and hydrogen-bonding interactions. The difference is particularly pronounced when the electrostatic and van der Waals' energy terms are calculated by modified equations that include an approximate representation of solvent effects. The incorrectly folded structures also have a significantly larger solvent-accessible surface and a greater fraction of non-polar side-chain atoms exposed to solvent. Examination of their interior shows that the packing of side-chains at the secondary structure interfaces, although corresponding to sterically allowed conformations, deviates from the characteristics found in normal proteins. The analysis of incorrectly folded structures has made it clear that the absence of bad non-bonded contacts, though necessary, is not sufficient to demonstrate the validity of model-built structures and that modeling of homologous structures has to be accompanied by a thorough quantitative evaluation of the results. Further, certain features that characterize native proteins are made evident by their absence in misfolded models.

Molecular anatomy of the antibody binding site

The binding region of immunoglobulins, which includes the portion of the molecule having the most variability in its amino acid sequence, is shown to have a surprisingly constant structure that can be characterized in terms of a simple, well-defined model. The binding region is composed of the antigen combining site plus its immediate vicinity and arises by noncovalent association of the light and heavy chain variable domains (VL and VH, respectively). The antigen combining site itself consists of six polypeptide chain segments ("hypervariable loops") which comprise some 80 amino acid residues and are attached to a framework of VL and VH beta-sheet bilayers. Having analyzed refined x-ray crystallographic coordinates for three antigen-binding fragments (Fab KOL (Marquart, M., Deisenhofer, J., and Huber, R. (1980) J. Mol. Biol. 141, 369-391), MCPC 603 (Segal, D., Padlan, E. A., Cohen, G. H., Rudikoff, S., Potter, M., and Davies, D. R. (1974) Proc. Natl. Acad. Sci. U. S. A. 71, 4298-4302), and NEW (Saul, F. A., Amzel, L. M., and Poljak, R. J. (1978) J. Biol. Chem. 253, 585-597] we use the results to introduce a general model for the VL-VH interface forming the binding region. The region consists of two closely packed beta-sheets, and its geometry corresponds to a 9-stranded, cylindrical barrel of average radius 0.84 nm with an average angle of -53 degrees between its two constituent beta-sheets. The barrel forms the bottom and sides of the antigen combining site. The model demonstrates that the structural variability of the binding region is considerably less than was thought previously. Amino acid residues which are part of the domain-domain interface and appear not to be accessible to solvent or antigen contribute to antibody specificity.