Chronic full-band recordings with graphene microtransistors as neural interfaces for discrimination of brain states

Brain states such as sleep, anesthesia, wakefulness, or coma are characterized by specific patterns of cortical activity dynamics, from local circuits to full-brain emergent properties. We previously demonstrated that full-spectrum signals, including the infraslow component (DC, direct current-coupled), can be recorded acutely in multiple sites using flexible arrays of graphene solution-gated field-effect transistors (gSGFETs). Here, we performed chronic implantation of 16-channel gSGFET arrays over the rat cerebral cortex and recorded full-band neuronal activity with two objectives: (1) to test the long-term stability of implanted devices; and (2) to investigate full-band activity during the transition across different levels of anesthesia. First, we demonstrate it is possible to record full-band signals with stability, fidelity, and spatiotemporal resolution for up to 5.5 months using chronic epicortical gSGFET implants. Second, brain states generated by progressive variation of levels of anesthesia could be identified as traditionally using the high-pass filtered (AC, alternating current-coupled) spectrogram: from synchronous slow oscillations in deep anesthesia through to asynchronous activity in the awake state. However, the DC signal introduced a highly significant improvement for brain-state discrimination: the DC band provided an almost linear information prediction of the depth of anesthesia, with about 85% precision, using a trained algorithm. This prediction rose to about 95% precision when the full-band (AC + DC) spectrogram was taken into account. We conclude that recording infraslow activity using gSGFET interfaces is superior for the identification of brain states, and further supports the preclinical and clinical use of graphene neural interfaces for long-term recordings of cortical activity.

Typical values of z-resolution for different Digital Breast Tomosynthesis systems evaluated in a multicenter study

PURPOSE

The aim of the present study, conducted by a working group of the Italian Association of Medical Physics (AIFM), was to define typical z-resolution values for different digital breast tomosynthesis (DBT) models to be used as a reference for quality control (QC). Currently, there are no typical values published in internationally agreed QC protocols.

METHODS

To characterize the z-resolution of the DBT models, the full width at half maximum (FWHM) of the artifact spread function (ASF), a technical parameter that quantifies the signal intensity of a detail along reconstructed planes, was analyzed. Five different commercial phantoms, CIRS Model 011, CIRS Model 015, Modular DBT phantom, Pixmam 3-D, and Tomophan, were evaluated on reconstructed DBT images and 82 DBT systems (6 vendors, 9 models) in use at 39 centers in Italy were involved.

RESULTS

The ASF was found to be dependent on the detail size, the DBT angular acquisition range, the reconstruction algorithm and applied image processing. In particular, a progressively greater signal spread was observed as the detail size increased and the acquisition angle decreased. However, a clear correlation between signal spread and angular range width was not observed due to the different signal reconstruction and image processing strategies implemented in the algorithms developed by the vendors studied.

CONCLUSIONS

The analysis led to the identification of typical z-resolution values for different DBT model-phantom configurations that could be used as a reference during a QC program.

Electrochemical biosensor for aerobic acetate detection

There is an increasing demand on alternatives methods to animal testing. Numerous health parameters have been already studied using in vitro devices able to mimic the essential functions of the organs, being the real-time monitoring and response to stimuli their main limitations. Regarding the health of the gut, the short chain fatty acids, and particularly acetate, have emerged as key biomarkers to evaluate gut healthiness and disease development, although the number of acetate biosensors is still very low. This article presents a microbial biosensor based on fully biocompatible materials which is able to detect acetate in aerobic conditions in the range between 11 and 50 mM, and without compromising the viability and function of either bacteria (>90% viability) or mammalian cells (>80% viability). The detection mechanism is based on the metabolism of acetate by Escherichia coli bacteria immobilized on the transducer surface. Ferricyanide is used as a redox mediator to transfer electrons from the acetate metabolism in the bacterial cells to the transducer. High bacterial concentrations are immobilized in the transducer surface (109 cfu mL-1) by electrodeposition of conductive alginate hydrogels doped with reduced graphene oxide. The results show successful outcomes to exploit bacteria as a biosensing tool, based on the use of inkjet printed transducers, biocompatible materials and cell entrapment technologies.

Structural brain anomalies in Cri-du-Chat syndrome: MRI findings in 14 patients and possible genotype-phenotype correlations

INTRODUCTION

Cri-du-Chat Syndrome (CdCS) is a genetic condition due to deletions showing different breakpoints encompassing a critical region on the short arm of chromosome 5, located between p15.2 and p15.3, first defined by Niebuhr in 1978. The classic phenotype includes a characteristic cry, peculiar facies, microcephaly, growth retardation, hypotonia, speech and psychomotor delay and intellectual disability. A wide spectrum of clinical manifestations can be attributed to differences in size and localization of the 5p deletion. Several critical regions related to some of the main features (such as cry, peculiar facies, developmental delay) have been identified. The aim of this study is to further define the genotype-phenotype correlations in CdCS with particular regards to the specific neuroradiological findings.

PATIENTS AND METHODS

Fourteen patients with 5p deletions have been included in the present study. Neuroimaging studies were conducted using brain Magnetic Resonance Imaging (MRI). Genetic testing was performed by means of comparative genomic hybridization (CGH) array at 130 kb resolution.

RESULTS

MRI analyses showed that isolated pontine hypoplasia is the most common finding, followed by vermian hypoplasia, ventricular anomalies, abnormal basal angle, widening of cavum sellae, increased signal of white matter, corpus callosum anomalies, and anomalies of cortical development. Chromosomal microarray analysis identified deletions ranging in size from 11,6 to 33,8 Mb on the short arm of chromosome 5. Then, we took into consideration the overlapping and non-overlapping deleted regions. The goal was to establish a correlation between the deleted segments and the neuroradiological features of our patients.

CONCLUSIONS

Performing MRI on all the patients in our cohort, allowed us to expand the neuroradiological phenotype in CdCS. Moreover, possible critical regions associated to characteristic MRI findings have been identified.

Understanding why fat, oil and grease (FOG) bioremediation can be unsuccessful

Commercial kitchen wastewaters are typically strong organic and fat-rich effluents, often identified as major contributors to fatberg formation and associated blockages in sewers. Experimental trials were done using synthetic kitchen wastewater to understand the complex reactions involved in microbial remediation in grease traps/separators prior discharge in sewers. The principle organic components (FOG, carbohydrate and protein nitrogen), were varied using ranges observed in a previous study on real kitchen wastewater characterisation. A model bacterium, Bacillus licheniformis NCIMB 9375, was used to evaluate microbial utilisation of the different organic fractions in relation to fat, oil and grease (FOG) degradation. Novel results in the treatment of these effluents showed that, the presence and concentration of alternative carbon sources and the ratio of carbon to nitrogen (COD:N) had great influence on FOG-degradation response. For example, FOG removal decreased from 24 to 10 mg/l/h when glucose was substitute for starch at equivalent concentrations (500 mg/l); and from 26 to 5 mg/l/h when initial COD:N increased from 45:1 to 147:1. The dominant influence of COD:N was validated using a commercial bioadditive and real kitchen wastewater adjusted to different COD:N ratios, confirming the strong influence of kitchen wastewater composition on bioremediation outcomes. These results can therefore have major implications for biological management of FOG in kitchens and sewers as they provide a scientific explanation for bioremediation success or failure.

A new conceptual model of pesticide transfers from agricultural land to surface waters with a specific focus on metaldehyde

Pesticide losses from agricultural land to water can result in the environmental deterioration of receiving systems. Mathematical models can make important contributions to risk assessments and catchment management. However, some mechanistic models have high parameter requirements which can make them difficult to apply in data poor areas. In addition, uncertainties in pesticide properties and applications are difficult to account for using models with long run-times. Alternative, simpler, conceptual models are easier to apply and can still be used as a framework for process interpretation. Here, we present a new conceptual model of pesticide behaviour in surface water catchments, based on continuous water balance calculations. Pesticide losses to surface waters are calculated based on the displacement of a limited fraction of the soil pore water during storm events occurring after application. The model was used to describe the behaviour of metaldehyde in a small (2.2 km2) under-drained catchment in Eastern England. Metaldehyde is a molluscicide which has been regularly detected at high concentrations in many drinking water supply catchments. Measured peak concentrations in stream water (to about 9 μg L-1) occurred in the first few storm events after application in mid-August. In each event, there was a quasi-exponential decrease in concentration during hydrograph recession. Peak concentrations decreased in successive events - responding to rainfall but reflecting an effective exhaustion in soil supply due to degradation and dissipation. Uncertain pesticide applications to the catchment were estimated using land cover analysis of satellite data, combined with a Poisson distribution to describe the timing of application. Model performance for both the hydrograph (after calibration of the water balance) and the chemograph was good and could be improved via some minor adjustments in assumptions which yield general insights into the drivers for pesticide transport. The use of remote sensing offers some promising opportunities for estimating catchment-scale pesticide applications and associated losses.

Characterisation of food service establishment wastewater and its implication for treatment

Essential for the selection of a reliable treatment system is the characterisation of the effluent to treat. Kitchen wastewater (KWW) from food service establishments (FSEs) is a strong organic and fat-rich effluent whose characterisation has not been sufficiently addressed. KWW composition is highly variable and linked to the FSE's size, the type of meals prepared and the amount of water used during the cleaning. COD, TSS and fat content (FOG) are the most common parameters found in literature. However, other physical and chemical parameters (e.g. temperature, pH, oil droplets characteristics and trace elements), correlated to commercial kitchen cleaning practices rather than the specific effluent, but equally influential on the treatment efficiencies of both physical and biological methods, have hardly been investigated. A comprehensive characterisation of wastewaters from three food service establishments was used to generate data to support the selection of appropriate FOG mitigation methods. Two novel analytical methods were used to quantify the proportion of emulsified FOG and associated droplet size from different kitchen washing effluents. The results showed that more than 90% of the FOG from the dishwasher effluent and around 35% of sink one was emulsified, with droplet sizes less than 100 μm, well below the removal capabilities of conventional grease interceptors, but easily removed using biological means. From the WW composition results, a formula for predictive modelling was derived to represent average organic matter composition for kitchen wastewater as C₂₀H₃₈O₁₀N, applicable in remediation processes. These results offer a good starting point for the design, operation, and optimisation of wastewater treatment systems of oil-rich KWW.

Color tunable pressure sensors based on polymer nanostructured membranes for optofluidic applications

We demonstrate an integrated optical pressure sensing platform for multiplexed optofluidics applications. The sensing platform consists in an array of elastomeric on-side nanostructured membranes -effectively 2D photonic crystal- which present colour shifts in response to mechanical stress that alter their nanostructure characteristical dimensions, pitch or orientation. The photonic membranes are prepared by a simple and cost-effective method based on the infiltration of a 2D colloidal photonic crystal (CPC) with PDMS and their integration with a microfluidic system. We explore the changes in the white light diffraction produced by the nanostructured membranes when varying the pneumatic pressure in the microfluidics channels as a way to achieve a power-free array of pressure sensors that change their reflective colour depending on the bending produced on each sensor. The structural characterization of these membranes was performed by SEM, while the optical properties and the pressure-colour relation were evaluated via UV-Vis reflection spectrometry. Maximum sensitivities of 0.17 kPa^-1 is obtained when measuring at Littrow configuration (θ_in = -θ_out), and close to the border of the membranes. The reflected colour change with pressure is as well monitorized by using a smartphone camera.

A balanced reciprocal translocation t(10;15)(q22.3;q26.1) interrupting ACAN gene in a family with proportionate short stature

PURPOSE

Few examples of the involvement of a single gene in idiopathic short stature have been described until now. Our aim was to identify the causative gene of proportionate short stature in a large family showing co-segregation of the phenotype with the reciprocal translocation t(10;15)(q22;q24).

METHODS

FISH mapping was carried out with BACs and long-range PCR probes to identify the smallest genomic regions harboring the translocation breakpoints. Real-Time RT-PCR was performed in blood after pre-amplification of target genes cDNA.

RESULT

The affected family members presented with a final height of between - 2.41 and - 4.18 SDS and very mild skeletal dysmorphisms. Growth rates of the proband and of her cousin, whose childhood and pre-pubertal bone age corresponded to the chronological age, showed a poor growth spurt during treatment with rhGH. However, their adult height was greater than that of their untreated mothers, suggesting efficacy of GH therapy. Breakpoint mapping revealed that the translocation t(10;15)(q22.3;q26.1) disrupts, on 15q, the ACAN gene at intron 1, decreasing its transcriptional expression.

CONCLUSIONS

This is the first description of a chromosome rearrangement disrupting ACAN and leading to its haploinsufficiency. ACAN loss of function should be considered a potential underpinning of short patients who display a poor growth spurt and belong to families with autosomal dominant segregation of proportionate short stature. Besides this core phenotype, literature review suggests that advanced bone age, early onset osteochondritis dissecans, osteoarthritis, intervertebral disc disease as well as craniofacial dysmorphisms can be important suggestive phenotypes in affected families.

Online oxygen monitoring using integrated inkjet-printed sensors in a liver-on-a-chip system

The demand for real-time monitoring of cell functions and cell conditions has dramatically increased with the emergence of organ-on-a-chip (OOC) systems. However, the incorporation of co-cultures and microfluidic channels in OOC systems increases their biological complexity and therefore makes the analysis and monitoring of analytical parameters inside the device more difficult. In this work, we present an approach to integrate multiple sensors in an extremely thin, porous and delicate membrane inside a liver-on-a-chip device. Specifically, three electrochemical dissolved oxygen (DO) sensors were inkjet-printed along the microfluidic channel allowing local online monitoring of oxygen concentrations. This approach demonstrates the existence of an oxygen gradient up to 17.5% for rat hepatocytes and 32.5% for human hepatocytes along the bottom channel. Such gradients are considered crucial for the appearance of zonation of the liver. Inkjet printing (IJP) was the selected technology as it allows drop on demand material deposition compatible with delicate substrates, as used in this study, which cannot withstand temperatures higher than 130 °C. For the deposition of uniform gold and silver conductive inks on the porous membrane, a primer layer using SU-8 dielectric material was used to seal the porosity of the membrane at defined areas, with the aim of building a uniform sensor device. As a proof-of-concept, experiments with cell cultures of primary human and rat hepatocytes were performed, and oxygen consumption rate was stimulated with carbonyl-cyanide-4-(trifluoromethoxy)phenylhydrazone (FCCP), accelerating the basal respiration of 0.23 ± 0.07 nmol s-1/106 cells up to 5.95 ± 0.67 nmol s-1/106 cells s for rat cells and the basal respiration of 0.17 ± 0.10 nmol s-1/106 cells by up to 10.62 ± 1.15 nmol s-1/106 cells for human cells, with higher oxygen consumption of the cells seeded at the outflow zone. These results demonstrate that the approach of printing sensors inside an OOC has tremendous potential because IJP is a feasible technique for the integration of different sensors for evaluating metabolic activity of cells, and overcomes one of the major challenges still remaining on how to tap the full potential of OOC systems.

Laparoscopic pancreaticoduodenectomy for tumors of the head of pancreas; 10 cases for a single center experience

OBJECTIVE

The tumors of the head of the pancreas are one of the leading causes of cancer-related death in Western countries. The current gold standard for these tumors is a Whipple procedure. This procedure did not change in its surgical steps since when it was initially introduced in 1935. More recently, a laparoscopic approach with similar outcomes has been described. The aim of this paper is to describe the laparoscopic surgical technique performed in our unit, reporting single center postoperative outcomes.

PATIENTS AND METHODS

From the 1st January 2013 to the 31st December 2015 a database was created. Data about patients who underwent a laparoscopic pancreaticoduodenectomy (LPD) were collected prospectively. All patients were preoperatively assessed with blood samples, tumor markers, CT chest abdomen and pelvis and/or MRI pancreas. Only patients with specific characteristics were considered eligible for an LPD: performance status 0, body mass index (BMI) less than 30 kg/m2, a small neoplastic lesion (< 3.5 cm) confined to the pancreas, the absence of infiltrated organs and/or blood vessels (T1 or T2). Postoperative data and complications were recorded and described according to the Clavien-Dindo classification and the international study group of pancreatic surgery definitions.

RESULTS

In a time interval of 36 months, 31 patients with an initially considered resectable pancreatic cancer were referred. 11 patients were found to have metastasis during the preoperative workout. Only 10 patients were considered eligible for a LPD. Six of them were men (60%). The mean BMI was 25.01 kg/m2 (19.6-29.8). 5 patients, who underwent to LPD did not have any comorbidities. An overall 50% of all patients were jaundice at the time of diagnosis with a mean bilirubin level of 181.3 µmol/L (119.7-307.8). All patients with a direct bilirubin greater than 250 µmol/L underwent a preoperative percutaneous biliary drainage. In the majority of the LPD performed (50%), the histology reported a pancreatic adenocarcinoma. Other postoperative histology described were: IPMN (20%), ampullar neoplasia (20%) and neuroendocrine tumor (10%). Neo-adjuvant chemotherapy was never considered indicated. The reported postoperative complications were: 1 anastomotic bleeding, 2 pancreatic fistula, 1 infected intra-abdominal collection and 1 delay gastric emptying. The pancreatic fistulas were considered grade A and grade B. One fatality after LPD occurred because of an uncontrollable, diffuse severe hemorrhagic gastritis associated with a GJ anastomosis bleeding in the POD 25. The mean hospital stay was 12.3 days (8-25). The mean operative time was 224 min (170-310). There were no intraoperative complications. The main intraoperative blood loss was 220 ml (180-400) and intraoperative blood transfusions were not required. The resection margins were negative (R0) in 100% of cases and the mean lymph nodes harvested were 24 (18-40). The LPD is still a not common practice. Our results are comparable with those reported in literature about the open technique. These remarkable surgical outcomes are probably related to the extremely careful preoperative patient selection performed. The indication for a laparoscopic vs. an open pancreaticoduodenectomy was based on a CT scan pancreas performed less than 30 days before the planned date of surgery and a careful preoperative assessment. A low complication rate and a relative short stay in hospital were associated to a good quality of life in the early postoperative period and an early referral for postoperative chemotherapy. Good clinical outcomes were associated with outstanding oncological results.

CONCLUSIONS

Laparoscopic pancreaticoduodenectomy is a feasible surgical procedure. Remarkable oncological and surgical outcomes can be achieved with a morbidity and mortality rate in line with the data reported by the large series of open procedures.

Compositional and physicochemical changes in waste materials and biogas production across 7 landfill sites in UK

The aim of this study was to evaluate the spatial distribution of the paper and fines across seven landfill sites (LFS) and assess the relationship between waste physicochemical properties and biogas production. Physicochemical analysis of the waste samples demonstrated that there were no clear trends in the spatial distribution of total solids (TS), moisture content (MC) and waste organic strength (VS) across all LFS. There was however noticeable difference between samples from the same landfill site. The effect of landfill age on waste physicochemical properties showed no clear relationship, thus, providing evidence that waste remains dormant and non-degraded for long periods of time. Landfill age was however directly correlated with the biochemical methane potential (BMP) of waste; with the highest BMP obtained from the most recent LFS. BMP was also correlated with depth as the average methane production decreased linearly with increasing depth. There was also a high degree of correlation between the Enzymatic Hydrolysis Test (EHT) and BMP test results, which motivates its potential use as an alternative to the BMP test method. Further to this, there were also positive correlations between MC and VS, VS and biogas volume and biogas volume and CH₄ content. Outcomes of this work can be used to inform waste degradation and methane enhancement strategies for improving recovery of methane from landfills.

Genome-wide association analysis of body conformation traits in Mexican Holstein cattle using a mix of sampled and imputed SNP genotypes

In arid and semi-arid zones, animal health and production are closely correlated with body conformation traits. These selected traits, in turn, allow livestock to adapt unfavorable soil and environmental conditions. The primary objective of this study was to perform a genome-wide association analysis for a set of sampled and imputed SNPs with 16 conformation traits in a population of Holstein cows from a desert area of Northwestern Mexico. Imputation from 6K to 50K SNPs was performed as a low-cost optimization strategy. Results show eight SNPs associated with two conformation traits. The Udder Depth trait resulted in seven associated SNPs from chromosome 10, that related to Marbling Score, Milk Yield, Fat Yield, Protein Yield, and Protein Percentage Quantitative Trait Loci (QTLs). The Body Depth trait resulted in one associated SNP from chromosome 2, although no QTL relation was found. The discovery of genes associated with conformation traits may be indicative of the adaptive selection pressures the Holstein breed has undergone in response to the extreme weather conditions found in the northwestern areas of Mexico. Results of this study indicate that traits such as stature and body depth may be used as indicators of cows' potential genetic merits for milk, fat, and protein production.

Zika, or the burden of uncertainty

In the first phases of an infectious outbreak, health authorities have to face the challenge of communicating uncertainty. Just when the attention of the public is at the top, information about what is going on is usually still missing. This is the case of Zika crisis in Latin America, where an association with microcephaly in newborns and neurological complications have been described, but not yet confirmed. Despite this, and even if the risk would be mainly limited to pregnant women, Zika threat is perceived by the general public as greater than others, such as those from dengue or flu. Some peculiarities of this outbreak explain such a gap between real and perceived risk. Nevertheless, in such a situation, WHO and other health authorities have the duty to act out of an abundance of caution, aware of the lose-lose game they are going through: if they raise alarm, and this subsided, they could be accused to fuel people's fears because of economic interests, as it happened in 2009 A(H1N1) pandemic; if they underestimate the threat, they could find themselves in front of a global tragedy.

Compositional analysis of excavated landfill samples and the determination of residual biogas potential of the organic fraction

The objectives of this study were to assess the biogas potential of landfilled materials and to further validate the suitability of the enzymatic hydrolysis test EHT as a valuable alternative to substitute the standardised test currently in use (BMP). Both tests were applied to a range of landfill waste samples. The waste composition and volatile solids content (VS) profile together with the BMP test results showed that the biogas potential of the waste samples was directly related to their VS content, as expected. The positive correlation between the VS and the BMP test (r=0.67) suggests that the first could be used as a primary indicator of biogas potential of waste samples. Nevertheless, it should be validated against the BMP test because, occasionally, the VS content does not equate to the biogas production. This was mainly due to the paper content of the samples which also correlates positively (r=0.77) with the BMP biogas production. The EHT results showed a higher correlation with the BMP test (r=0.91) than in previous studies which used a wider mixture of enzymes containing cellulase, hemicellulase and carbohydrase. This finding positions the EHT as a quick assessing method for the biodegradability of waste samples in future sample regimes.

Evaluating leachate recirculation with cellulase addition to enhance waste biostabilisation and landfill gas production

The effect of leachate recirculation with cellulase augmentation on municipal solid waste (MSW) biostabilisation and landfill gas production was investigated using batch bioreactors to determine the optimal conditions of moisture content, temperature and nutrients. Experimentation was thereafter scaled-up in 7L bioreactors. Three conditions were tested including (1) leachate recirculation only, (2) leachate recirculation with enzyme augmentation and (3) no leachate recirculation (control). Cumulative biogas production of the batch tests indicated that there was little difference between the leachate and control test conditions, producing on average 0.043m(3)biogaskg(-1) waste. However the addition of cellulase at 15×10(6)Utonne(-1) waste doubled the biogas production (0.074m(3)biogaskg(-1) waste). Similar trend was observed with the bioreactors. Cellulase addition also resulted in the highest COD reduction in both the waste and the leachate samples (47% and 42% COD reduction, respectively). In both cases, the quantity of biogas produced was closer to the lower value of theoretical and data-based biogas prediction indicators (0.05-0.4m(3)biogaskg(-1) waste). This was likely due to a high concentration of heavy metals present in the leachate, in particular Cr and Mn, which are known to be toxic to methanogens. The cost-benefit analysis (CBA) based on the settings of the study (cellulase concentration of 15×10(6)Utonne(-1) waste) showed that leachate bioaugmentation using cellulase is economically viable, with a net benefit of approximately €12.1million on a 5Mt mixed waste landfill.

Carbon capture and biogas enhancement by carbon dioxide enrichment of anaerobic digesters treating sewage sludge or food waste

The increasing concentration of carbon dioxide (CO2) in the atmosphere and the stringent greenhouse gases (GHG) reduction targets, require the development of CO2 sequestration technologies applicable for the waste and wastewater sector. This study addressed the reduction of CO2 emissions and enhancement of biogas production associated with CO2 enrichment of anaerobic digesters (ADs). The benefits of CO2 enrichment were examined by injecting CO2 at 0, 0.3, 0.6 and 0.9 M fractions into batch ADs treating food waste or sewage sludge. Daily specific methane (CH4) production increased 11-16% for food waste and 96-138% for sewage sludge over the first 24h. Potential CO2 reductions of 8-34% for sewage sludge and 3-11% for food waste were estimated. The capacity of ADs to utilise additional CO2 was demonstrated, which could provide a potential solution for onsite sequestration of CO2 streams while enhancing renewable energy production.

Evaluation of engineered nanoparticle toxic effect on wastewater microorganisms: current status and challenges

The use of engineered nanoparticles (ENPs) in a wide range of products is associated with an increased concern for environmental safety due to their potential toxicological and adverse effects. ENPs exert antimicrobial properties through different mechanisms such as the formation of reactive oxygen species, disruption of physiological and metabolic processes. Although there are little empirical evidences on environmental fate and transport of ENPs, biosolids in wastewater most likely would be a sink for ENPs. However, there are still many uncertainties in relation to ENPs impact on the biological processes during wastewater treatment. This review provides an overview of the available data on the plausible effects of ENPs on AS and AD processes, two key biologically relevant environments for understanding ENPs-microbial interactions. It indicates that the impact of ENPs is not fully understood and few evidences suggest that ENPs could augment microbial-mediated processes such as AS and AD. Further to this, wastewater components can enhance or attenuate ENPs effects. Meanwhile it is still difficult to determine effective doses and establish toxicological guidelines, which is in part due to variable wastewater composition and inadequacy of current analytical procedures. Challenges associated with toxicity evaluation and data interpretation highlight areas in need for further research studies.

Peripheral nerve regeneration through microelectrode arrays based on silicon technology

This paper describes some developments, made to obtain a chronic neural interface to record signals from regenerated peripheral nerves. Microperforated silicon dices, fabricated by techniques compatible with CMOS processes, were coupled in silicone nerve chambers and implanted between the severed ends of peripheral nerves in rats. Three configurations of perforated dices with 25 via-holes of 100 μm diameter, 121 via-holes of 40 μm and 400 via-holes of 10 μm were assessed. The feasibility of axonal regeneration through the dices via-holes was proved by histological and physiological methods over 3 months post-implantation. The regenerated nerves were organized in fascicles corresponding to the grid pattern of the via-holes. However, nerve regeneration was difficult and distal re-innervation delayed with respect to simple tubulization repair. The size of the via-holes and the total open area are determinants of the degree and quality of regeneration. Further improvements are needed in both the microelectrode dice design and in neurobiological stimulation of regeneration.

Isolation and culture of pig tonsil lymphocytes

Tonsils are secondary lymphoid organs that play an important role in host defense. The aim of our study was to develop reliable procedures for isolation and culture of pig tonsil cells, and to validate their possible use in functional immunoassays. Using our isolation procedure, we recovered on average 238.7 ± 107.1 × 10(6) cells per tonsil couple with a mean vitality of 89.8 ± 2.7%. These values significantly decreased 8 months after freezing at -80°C along with the subsequent spontaneous release of both IgA and IgG in culture. These results suggest to use pig tonsil cells within 2 months from thawing to maintain suitable conditions in terms of recovery, vitality and release of antibody in vitro. Tonsil mononuclear cells also showed the ability to secrete antimicrobial peptides and to respond in vitro to immunological stimuli. On the whole, our study has defined operating conditions for tonsil processing, control of bacterial contaminations, time limits of storage at -80°C, as well as for evaluating polyclonal Ig production in vitro. Such procedures are likely to be of some importance in studies on regional immunity and in the development of large animal models for biomedical sciences.

Pharmacokinetics of ketamine and propofol combination administered as ketofol via continuous infusion in cats

The pharmacokinetics of the extemporaneous combination of low doses of ketamine and propofol, known as 'ketofol', frequently used for emergency procedures in humans to achieve safe sedation and analgesia was studied in cats. The study was performed to assess propofol, ketamine and norketamine kinetics in six female cats that received ketamine and propofol (1:1 ratio) as a loading dose (2 mg/kg each, IV) followed by a continuous infusion (10 mg/kg/h each, IV, 25 min of length). Blood samples were collected during the infusion period and up to 24 h afterwards. Drug quantification was achieved by HPLC analysis using UV-visible detection for ketamine and fluorimetric detection for propofol. The pharmacokinetic parameters were deduced by a two-compartment bolus plus infusion model for propofol and ketamine and a monocompartmental model for norketamine. Additional data were derived by a noncompartmental analysis. Propofol and ketamine were quantifiable in most animals until 24 and 8 h after the end of infusion, respectively. Propofol showed a long elimination half-life (t(1/2λ2) 7.55 ± 9.86 h), whereas ketamine was characterized by shorter half-life (t(1/2λ2) 4 ± 3.4 h) owing to its rapid biotransformation into norketamine. The clinical significance of propofol's long elimination half-life and low clearance is negligible when the drug is administered as short-term and low-dosage infusion. The concurrent administration of ketamine and propofol in cats did not produce adverse effects although it was not possible to exclude interference in the metabolism.

Reverse transcription real-time PCR for detection of porcine interferon α and β genes

A few studies provided convincing evidence of constitutive expression of type I interferons (IFNs) in humans and mice, and of the steady-state role of these cytokines under health conditions. These results were later confirmed in pigs, too. In line with this tenet, low levels of IFN-α/β can be detected in swine tissues in the absence of any specific inducer. These studies are compounded by the utmost complexity of type I IFNs (including among others 17 IFN-α genes in pigs), which demands proper research tools. This prompted us to analyse the available protocols and to develop a relevant, robust, reverse transcription (RT) real-time polymerase chain reaction (PCR) detection system for the amplification of porcine IFN-α/β genes. The adopted test procedure is user-friendly and provides the complete panel of gene expression of one subject in a microtitre plate. Also, a proper use of PCR fluorochromes (SYBR(®) versus EvaGreen(®) supermix) enables users to adopt proper test protocols in case of low-expression porcine IFN-α genes. This is accounted for by the much higher sensitivity of the test protocol with EvaGreen(®) supermix. Interestingly, IFN-β showed the highest frequency of constitutive expression, in agreement with its definition of 'immediate early' gene in both humans and mice. Results indicate that the outlined procedure can detect both constitutively expressed and virus-induced IFN-α/β genes, as well as the impact of environmental, non-infectious stressors on the previous profile of constitutive expression.

A mass transfer model of ammonia volatilization from anaerobic digestate

Anaerobic digestion (AD) is becoming increasingly popular for treating organic waste. The methane produced can be burned to generate electricity and the digestate, which is high in mineral nitrogen, can be used as a fertiliser. In this paper we evaluate potential losses of ammonia via volatilization from food waste anaerobic digestate using a closed chamber system equipped with a sulphuric acid trap. Ammonia losses represent a pollution source and, over long periods could reduce the agronomic value of the digestate. Observed ammonia losses from the experimental system were linear with time. A simple non-steady-state partitioning model was developed to represent the process. After calibration, the model was able to describe the behaviour of ammonia in the digestate and in the trap very well. The average rate of volatilization was approximately 5.2 g Nm(-2)week(-1). The model was used to extrapolate the findings of the laboratory study to a number of AD storage scenarios. The simulations highlight that open storage of digestate could result in significant losses of ammonia to the atmosphere. Losses are predicted to be relatively minor from covered facilities, particularly if depth to surface area ratio is high.

Non-invasive assessment of corneal endothelial permeability by means of electrical impedance measurements

The permeability of the corneal endothelial layer has an important role in the correct function of the cornea. Since ionic permeability has a fundamental impact on the passive electrical properties of living tissues, here it is hypothesized that impedance methods can be employed for assessing the permeability of the endothelial layer in a minimally invasive fashion. Precisely, the main objective of the present study is to develop and to analyze a minimally invasive method for assessing the electrical properties of the corneal endothelium, as a possible diagnostic tool for the evaluation of patients with endothelial dysfunction. A bidimensional model consisting of the main corneal layers and a four-electrode impedance measurement setup placed on the epithelium has been implemented and analyzed by means of the finite elements method (FEM). In order to obtain a robust indicator of the permeability of the endothelium layer, the effect of the endothelium electrical properties on the measured impedance has been studied together with reasonable variations of the other model layers. Simulation results show that the impedance measurements by means of external electrodes are indeed sufficiently sensitive to the changes in the electrical properties of the endothelial layer. It is concluded that the method presented here can be employed as non-invasive method for assessing endothelial layer function.

Residues characterisation from the fluidised bed combustion of East London's solid recovered fuel

Waste thermal treatment in Europe is moving towards the utilisation of the combustible output of mechanical, biological treatment (MBT) plants. The standardisation of solid recovered fuels (SRF) is expected to support this trend and increase the amount of the generated combustion residues. In this work, the residues and especially the fly ashes from the fluidised bed combustion (FBC) of East London's NCV 3, Cl 2, and Hg 1 class SRF, are characterised. The following toxicity indicators have been studied: leachable chlorine, organochlorides expressed as pentachlorobenzene and hexachlorobenzene, and the heavy metals Cu, Cr, Cd, Zn, Ni, and Pb. Furthermore the mineralogical pattern of the ashes has been studied by means of XRD and SEM-EDS. The results suggest that these SRF derived ashes have significantly lower quantities of Cu, Cd, Pb, Zn, leachable Cl, and organochlorides when compared to other literature values from traditional waste thermal treatment applications. This fact highlights the importance of modern separation technologies employed in MBT plants for the removal of components rich in metals and chlorine from the combustible output fraction of SRF resulting to less hazardous residues.