Media selection for anammox-based polishing filters: Balancing anammox enrichment and retention with filtration function

Retrofitting conventional denitrification filters into partial denitrification-anammox (PdNA)- or anammox (AnAOB)-based filters will reduce the needs for external carbon addition. The success of AnAOB-based filters depends on anammox growth and retention within such filters. Studies have overlooked the importance of media selection and its impact on AnAOB capacity, head loss progression dynamics, and shear conditions applied onto the AnAOB biofilm. The objective of this study was to evaluate viable media types (10 types) that can enhance AnAOB rates for efficient nitrogen removal in filters. Given the higher backwash requirement and lower AnAOB capacity of the conventionally used sand, expanded clay (3-5 mm) was recommended for AnAOB-based filters in this study. Owing to its surface characteristics, expanded clay had higher AnAOB activity (304- vs. 104-g NH₄ ⁺ -N/m² /day) and higher AnAOB retention (43% more) than sand. Increasing the iron content of expanded clay to 37% resulted in an increase in zeta potential, which led to 56% more anammox capacity compared to expanded clay with 7% iron content. This work provides insight into the importance of media types in the growth and retention of AnAOB in filters, and this knowledge could be used as basis in the development of PdNA filters. PRACTITIONER POINTS: Expanded clay showed the lowest head loss buildup and most likely will result in longer runtime for full-scale PdNA applications The highest AnAOB rates were achieved in expanded clay types and sand compared with smaller media typically used in biofiltration Expanded clay resulted in better AnAOB retention under shear, whereas sand could not withstand shear and required more frequent backwashing Expanded clay iron coating enhanced AnAOB enrichment and retention, most likely due to increased surface roughness and/or positive charge.

Full-scale transition from denitrification to partial denitrification-anammox (PdNA) in deep-bed filters: Operational strategies for and benefits of PdNA implementation

This study shows for the first time more than 2 years of operation of a mainstream anammox application at full-scale under temperate climate. This implementation of partial denitrification-anammox (PdNA) in deep bed filters at the HRSD York River treatment plant was demonstrated to achieve the benefits of shortcut nitrogen removal without nitrite oxidizing bacteria (NOB) out-selection. The transition from denitrification to PdNA filters required bleeding ammonium to the filters using an optimized ammonium versus NOx (AvN) control in the upstream aeration tanks and maintaining a nitrate residual in the filter effluent through feedforward/feedback control. The latter actions led to savings of 85% in methanol, 100% in alkalinity, and 35% in capacity enhancement. Up to 6 mg NH₄ ⁺ -N/L with an average of 2.2 ± 0.98 mg NH₄ ⁺ -N/L was removed through the anammox pathway, which accounted for about 15% of the overall plant nitrogen removal. Anammox enrichment was confirmed by activity testing and molecular analysis. The large excess of AnAOB capacity present in the filters (5-10 times more than normal operation) resulted in stable and reliable operation through winter conditions and showed potential for further intensification. PRACTITIONER POINTS: For the first time, long-term mainstream anammox was established full-scale through PdNA implementation in deep-bed filters. PdNA implementation required upstream aeration control optimization to provide a blend of ammonium and nitrate to the filters. Efficient anammox enrichment and retention resulted in reliable PdNA performance under different seasonal and influent conditions. PdNA implementation resulted in significant methanol and alkalinity savings and upstream capacity enhancement as ammonia removal depended less on aerobic nitrification. In the event of NOB out-selection and presence of nitrite, carbon savings in PdNA polishing filters can be enhanced via partial nitritation-anammox.

Mainstream partial denitrification-anammox in sand and expanded clay deep-bed polishing filters under practical loading rates and backwashing conditions

This study focused on evaluating the feasibility of expanded clay and sand as media types for mainstream partial denitrification-anammox (PdNA) in deep-bed single-media polishing filters under nitrogen and solids loading rates as well as backwash conditions similar to conventional denitrification filters. The surface roughness and iron content of the expanded clay were hypothesized to allow for enhanced anammox retention, nitrogen removal rates, and runtimes. However, under the tested loading rates and backwash conditions, no clear benefit of expanded clay was observed compared with conventional sand. This study showed the feasibility of PdNA in filters with both sand and expanded clay with PdN efficiencies of 76% and 77%, PdNA rates of 840 and 843 g N/m³ /d and TIN removal rates of 960 and 964 g N/m³ /d, respectively. Glycerol demands were 1.5-1.6 g COD _added per g TIN _removed , thus indicating potential carbon savings up to 75% compared with conventional denitrification. Overall, this study showed for the first time PdNA filters performing at nitrogen removal rates double that of previous PdNA studies under realistic conditions while providing insights into the media choice and backwashing conditions. Future research on expanded clay backwash conditions is needed to provide its full potential in PdNA filters. PRACTITIONER POINTS: Hydraulic and TSS loading rates similar to conventional denitrification can be applied in PdNA filters. Conventional sand can be used when retrofitting conventional denitrification filters into PdNA filters. Carbon savings up to 75% can be achieved with glycerol when retrofitting conventional filters into PdNA filters.