Evidence of the presence of SARS-CoV-2 virus in atmospheric air and surfaces of a dedicated COVID hospital

The present study was conducted from July 1, 2020 to September 25, 2020 in a dedicated coronavirus disease 2019 (COVID‐19) hospital in Delhi, India to provide evidence for the presence of severe acute respiratory syndrome coronavirus 2 (SARS‐CoV‐2) virus in atmospheric air and surfaces of the hospital wards. Swabs from hospital surfaces (patient's bed, ward floor, and nursing stations area) and suspended particulate matter in ambient air were collected by a portable air sampler from the medicine ward, intensive care unit, and emergency ward admitting COVID‐19 patients. By performing reverse‐transcriptase polymerase chain reaction (RT‐PCR) for E‐gene and RdRp gene, SARS‐CoV‐2 virus was detected from hospital surfaces and particulate matters from the ambient air of various wards collected at 1 and 3‐m distance from active COVID‐19 patients. The presence of the virus in the air beyond a 1‐m distance from the patients and surfaces of the hospital indicates that the SARS‐CoV‐2 virus has the potential to be transmitted by airborne and surface routes from COVID‐19 patients to health‐care workers working in COVID‐19 dedicated hospital. This warrants that precautions against airborne and surface transmission of COVID‐19 in the community should be taken when markets, industries, educational institutions, and so on, reopen for normal activities.

Lattice defect-formulated ferromagnetism and UV photo-response in pure and Nd, Sm substituted ZnO thin films

The induction of charge and spin in diluted magnetic semiconductor ZnO is explored for spintronic devices and its wide direct band gap (3.37 eV) and large exciton binding energy (60 meV) exhibit potential in UV photodetectors. We reported the ferromagnetic and optical properties of pure ZnO, Zn_0.97Nd_0.03O and Zn_0.97Sm_0.03O thin films. These thin films were synthesized by a metallo-organic decomposition method and annealed at 500 °C for 7 h. Rietveld refinement of the XRD data results in a wurtzite ZnO structure with Nd, Sm doping. The dopants and nanoparticle size are responsible for wurtzite structural deformation, inducing lattice strain effect, which may influence the band gap energy and high-T_C ferromagnetism of ZnO. The average size of ZnO nanoparticles with Nd, Sm doping is 10 nm, confirmed with atomic force microscopy. The Raman spectra confirm the wurtzite structure of ZnO with crystalline quality and lattice defect formation with dopant Nd, Sm ions. A near-band-edge emission due to band gap energy is evaluated with photoluminescence spectra, which also involved multiple visible emissions due to oxygen vacancies. The oxygen vacancies-mediated magnetic interactions impart room temperature ferromagnetism in pure ZnO which is enhanced with Nd, Sm doping. The electron paramagnetic resonance spectra revealed the effects of defects and unpaired electrons responsible for observed room temperature ferromagnetism. The zero field cooling and field cooling magnetic measurements include antiferromagnetic interactions without any spin-glass formation. The observed ferromagnetism also correlates with first principle calculations reported for Nd, Sm-doped ZnO and suggests long-range ferromagnetic ordering attributed to defect carriers. The Nd, Sm doping into ZnO thin films significantly enhances absorption in the UV region and suggests its usability for UV detectors. Under UV irradiation (λ = 325 nm), the value of photocurrent in Nd, Sm:ZnO thin films is highly enhanced for possible use in UV sensors.

Multifunctional gold coated iron oxide core-shell nanoparticles stabilized using thiolated sodium alginate for biomedical applications

In this paper we report synthesis of aqueous based gold coated iron oxide nanoparticles to integrate the localized surface plasma resonance (SPR) properties of gold and magnetic properties of iron oxide in a single system. Iron oxide-gold core shell nanoparticles were stabilized by attachment of thiolated sodium alginate to the surface of nanoparticles. Transmission electron microscope (TEM) micrograph presents an average elementary particle size of 8.1±2.1nm. High resolution TEM (HR-TEM) and X-ray photon spectroscopy further confirms the presence of gold shell around iron oxide core. Gold coating is responsible for reducing saturation magnetization (M_s) value from ~41emu/g to ~24emu/g - in thiolated sodium alginate stabilized gold coated iron oxide core-shell nanoparticles. The drug (curcumin) loading efficiency for the prepared nanocomposites was estimated to be around 7.2wt% (72μgdrug/mg nanoparticles) with encapsulation efficiency of 72.8%. Gold-coated iron oxide core-shell nanoparticles could be of immense importance in the field of targeted drug delivery along with capability to be used as contrast agent for MRI & CT.

Fe3C-filled carbon nanotubes: permanent cylindrical nanomagnets possessing exotic magnetic properties

The present study aims to deduce the confinement effect on the magnetic properties of iron carbide (Fe3C) nanorods filled inside carbon nanotubes (CNTs), and to document any structural phase transitions that can be induced by compressive/tensile stress generated within the nanorod. Enhancement in the magnetic properties of the nanorods is attributed to tensile stress as well as to compression, present in the radial direction and along the nanotube axis, respectively. Finally, the growth of permanent cylindrical nanomagnets has been optimized by applying a field gradient. Besides presenting the growth model of in situ filling, we have also proposed the mechanism of magnetization of the nanotubes. Magnetization along the tube axis has been probed by confirming the pole formation. Fe3C has been selected because of its ease of formation, low TC and incompressibility.

Interfacial Charge Induced Magnetoelectric Coupling at BiFeO₃/BaTiO₃ Bilayer Interface

Bilayer thin films of BiFeO3-BaTiO3 at different thicknesses of BiFeO3 were prepared by RF-magnetron sputtering technique. A pure phase polycrystalline growth of thin films was confirmed from XRD results. Significantly improved ferroelectric polarization (2Pr ∼ 30 μC/cm(2)) and magnetic moment (Ms ∼ 33 emu/cc) were observed at room temperature. Effect of ferroelectric polarization on current conduction across the interface has been explored. Accumulation and depletion of charges at the bilayer interface were analyzed by current-voltage measurements which were further confirmed from hysteretic dynamic resistance and capacitance voltage profiles. Magnetoelectric coupling due to induced charges at grain boundaries of bilayer interface was further investigated by room temperature magnetocapacitance analysis. A room temperature magnetocapacitance was found to originate from induced charge at the bilayer interface which can be manipulated by varying the thickness of BFO to obtain higher ME coupling coefficient. Dynamic magnetoelectric coupling was investigated, and maximum longitudinal magnetoelectric coupling was observed to be 61 mV/cm·Oe at 50 nm thickness of BiFeO3. The observed magnetoelectric properties are potentially useful for novel room temperature magnetoelectric and spintronic device applications.

Strong Magnetoelectric Coupling of Pb1-xSrx(Fe0.012Ti0.988)O3 Nanoparticles

Pb1-xSrx(Fe012Ti0.988)O3 (PSFT) nanoparticles were prepared by a chemical synthesis using polyvinyl alcohol as surfactant. X-ray diffraction pattern has been used to analyze the phase structure and average particles size. Transmission electron microscopy is used to confirm the nano size of the PSFT particles. The magnetoelectric (ME) coupling is observed at room temperature by measuring the ME coefficient (αE) as the function of applied dc magnetizing field under the influence of ac magnetic field of 2 Oe and frequency 800 Hz. The maximal value of αE is observed in PSFT3. The ME coupling is also studied by observing the variation of polarization hysteresis measured in the presence of zero and 0.2 T of external magnetic field.

Temperature tuned defect induced magnetism in reduced graphene oxide

The existence of ferromagnetism in the wonder material graphene has opened up the path for many future spintronics and memory applications. But simultaneously it is very important to understand the variation of these properties with temperature in regards to the device applications. Here we observed defect induced ferromagnetism in chemically reduced graphene and the effect of temperature on it. Several theoretical studies have proved that the main cause of ferromagnetism in graphene is due to various defects. The observed results established that these defects can be mended by treating the samples at elevated temperatures but sacrificing the ferromagnetism simultaneously. Hence, temperature plays a crucial role in controlling the magnetism as well as the defects in graphene. In this study we revealed that at 600 °C the self-repair mechanism helps the defects to mend but resulting in the decrement of magnetization and providing a good quality graphene with less defects.

Chemical and biological extraction of metals present in E waste: A hybrid technology

Management of metal pollution associated with E-waste is widespread across the globe. Currently used techniques for the extraction of metals from E-waste by using either chemical or biological leaching have their own limitations. Chemical leaching is much rapid and efficient but has its own environmental consequences, even the future prospects of associated nanoremediation are also uncertain. Biological leaching on the other hand is comparatively a cost effective technique but at the same moment it is time consuming and the complete recovery of the metal, alone by biological leaching is not possible in most of the cases. The current review addresses the individual issues related to chemical and biological extraction techniques and proposes a hybrid-methodology which incorporates both, along with safer chemicals and compatible microbes for better and efficient extraction of metals from the E-waste.

Direct evidence for multiferroic magnetoelectric coupling in 0.9BiFeO3-0.1BaTiO3

Magnetic, dielectric and calorimetric studies on 0.9BiFeO3-0.1BaTiO3 indicate strong magnetoelectric coupling. XRD studies reveal a very remarkable change in the rhombohedral distortion angle and a significant shift in the atomic positions at the magnetic Tc due to an isostructural phase transition. The calculated polarization using Rietveld refined atomic positions scales linearly with magnetization. Our results provide the first unambiguous, atomic level evidence for magnetoelectric coupling of intrinsic multiferroic origin in a BiFeO3-based system.

Magnetic properties of iron nanoparticles prepared by exploding wire technique

Nanoparticles of iron were prepared in distilled water using very thin iron wires and sheets, by the electro-exploding wire technique. Transmission electron microscopy reveals the size of the nanoparticles to be in the range 10 to 50 nm. However, particles of different sizes can be segregated by using ultrahigh centrifuge. X-ray diffraction studies confirm the presence of the cubic phase of iron. These iron nanoparticles were found to exhibit fluorescence in the visible region in contrast to the normal bulk material. The room temperature hysteresis measurements upto a field of 1.0 tesla were performed on a suspension of iron particles in the solution as well as in the powders obtained by filtration. The hysteresis loops indicate that the particles are superparamagnetic in nature. The saturation magnetizations was approximately 60 emu/gm. As these iron particles are very sensitive to oxygen a coating of non-magnetic iron oxide tends to form around the particles giving it a core-shell structure. The core particle size is estimated theoretically from the magnetization measurements. Suspensions of iron nanoparticles in water have been proposed to be used as an effective decontaminant for ground water.