Piezo1-mediated regulation of smooth muscle cell volume in response to enhanced extracellular matrix rigidity

BACKGROUND AND PURPOSE

Decreased aortic compliance is a precursor to numerous cardiovascular diseases. Compliance is regulated by the rigidity of the aortic wall and the vascular smooth muscle cells (VSMCs). Extracellular matrix stiffening, observed during ageing, reduces compliance. In response to increased rigidity, VSMCs generate enhanced contractile forces that result in VSMC stiffening and a further reduction in compliance. Mechanisms driving VSMC response to matrix rigidity remain poorly defined.

EXPERIMENTAL APPROACH

Human aortic-VSMCs were seeded onto polyacrylamide hydrogels whose rigidity mimicked either healthy (12 kPa) or aged/diseased (72 kPa) aortae. VSMCs were treated with pharmacological agents prior to agonist stimulation to identify regulators of VSMC volume regulation.

KEY RESULTS

On pliable matrices, VSMCs contracted and decreased in cell area. Meanwhile, on rigid matrices VSMCs displayed a hypertrophic-like response, increasing in area and volume. Piezo1 activation stimulated increased VSMC volume by promoting calcium ion influx and subsequent activation of PKC and aquaporin-1. Pharmacological blockade of this pathway prevented the enhanced VSMC volume response on rigid matrices whilst maintaining contractility on pliable matrices. Importantly, both piezo1 and aquaporin-1 gene expression were up-regulated during VSMC phenotypic modulation in atherosclerosis and after carotid ligation.

CONCLUSIONS AND IMPLICATIONS

In response to extracellular matrix rigidity, VSMC volume is increased by a piezo1/PKC/aquaporin-1 mediated pathway. Pharmacological targeting of this pathway specifically blocks the matrix rigidity enhanced VSMC volume response, leaving VSMC contractility on healthy mimicking matrices intact. Importantly, upregulation of both piezo1 and aquaporin-1 gene expression is observed in disease relevant VSMC phenotypes.

New insights from nanotechnology in SARS-CoV-2 detection, treatment strategy, and prevention

The recent outbreak of SARS-CoV-2 resulted into the deadly COVID-19 pandemic, which has made a profound impact on mankind and the world health care system. SARS-CoV-2 is mainly transmitted within the population via symptomatic carriers, enters the host cell via ACE2 and TMPSSR2 receptors and damages the organs. The standard diagnostic tests and treatment methods implemented lack required efficiency to beat SARS-CoV-2 in the race of its spreading. The most prominently used diagnostic test,reverse transcription-polymerase chain reaction (a nucleic acid-based method), has limitations including a prolonged time taken to reveal results, limited sensitivity, a high rate of false negative results, and lacking specificity due to a homology with other viruses. Furthermore, as part of the treatment, antiviral drugs such as remdesivir, favipiravir, lopinavir/ritonavir, chloroquine, daclatasvir, atazanavir, and many more have been tested clinically to check their potency for the treatment of SARS-CoV-2 but none of these antiviral drugs are the definitive cure or suitable prophylaxis. Thus, it is always required to combat SARS-CoV-2 spread and infection for a better and precise prognosis. This review answers the above mentioned challenges by employing nanomedicine for the development of improved detection, treatment, and prevention strategies for SARS-CoV-2. In this review, nanotechnology-based detection methods such as colorimetric assays, photothermal biosensors, molecularly imprinted nanoparticles sensors, electrochemical nanoimmunosensors, aptamer-based biosensors have been discussed. Furthermore, nanotechnology-based treatment strategies involving polymeric nanoparticles, metallic nanoparticles, lipid nanoparticles, and nanocarrier-based antiviral siRNA delivery have been depicted. Moreover, SARS-CoV-2 prevention strategies, which include the nanotechnology for upgrading personal protective equipment, facemasks, ocular protection gears, and nanopolymer-based disinfectants, have been also reviewed. This review will provide a one-site informative platform for researchers to explore the crucial role of nanomedicine in managing the COVID-19 curse more effectively.

Ultramini-percutaneous nephrolithotomy versus retrograde intrarenal surgery in the treatment of 10-30 mm calculi: a randomized controlled trial

The surgical management of renal stones 10-30 mm is usually performed with percutaneous nephrolithotomy (PCNL) and retrograde intrarenal surgery (RIRS). Standard form of percutaneous nephrolithotomy has paved the way for miniaturized PCNL in many centres. We wanted to evaluate the efficacy, safety and the cost-effectiveness of ultramini-percutaneous nephrolithotomy (UMP) versus RIRS in the treatment of renal stones with stone burden 10-30 mm. Patients with renal stone burden 10-30 mm were prospectively randomized into either UMP or RIRS. The demographic data, stone characteristic, operative time and cost of the equipment were recorded. The stone free status, analgesic requirement, deterioration of the renal function and hemoglobin and the postoperative complications as per Clavein-Dindo grade were recorded. One hundred and fifty patients met inclusion criteria. Out of these 98 underwent UMP and 46 RIRS. Six withdrew the consent before the procedure. Mean stone size was comparable in either of the groups. Mean laser time and stone extraction time was significantly less for UMP compared to RIRS (41.17 min versus 73.58 min p < 0.0001). Mean consumable costs in the UMP group were considerably less at US$45.73 compared to the RIRS group at $423.11 (p < 0.0001). The stone free rates at 1 month of follow-up were 100% for UMP group and 73% for RIRS group. There were insignificant changes to mean hemoglobin and glomerular filtration rate (GFR) in all patients and the average length of the stay was similar in both the groups. The postoperative complications revealed Grade I and II rate of 10% in the UMP group and 35% in the RIRS group, respectively. We concluded that UMP to be safe, effective and more economical to the RIRS for renal stones up to 3 cm in size.Trial registered with ISRCTN registry ID ISRCTN20935105, Retrospective.

Using Polyacrylamide Hydrogels to Model Physiological Aortic Stiffness Reveals that Microtubules Are Critical Regulators of Isolated Smooth Muscle Cell Morphology and Contractility

Vascular smooth muscle cells (VSMCs) are the predominant cell type in the medial layer of the aortic wall and normally exist in a quiescent, contractile phenotype where actomyosin-derived contractile forces maintain vascular tone. However, VSMCs are not terminally differentiated and can dedifferentiate into a proliferative, synthetic phenotype. Actomyosin force generation is essential for the function of both phenotypes. Whilst much is already known about the mechanisms of VSMC actomyosin force generation, existing assays are either low throughput and time consuming, or qualitative and inconsistent. In this study, we use polyacrylamide hydrogels, tuned to mimic the physiological stiffness of the aortic wall, in a VSMC contractility assay. Isolated VSMC area decreases following stimulation with the contractile agonists angiotensin II or carbachol. Importantly, the angiotensin II induced reduction in cell area correlated with increased traction stress generation. Inhibition of actomyosin activity using blebbistatin or Y-27632 prevented angiotensin II mediated changes in VSMC morphology, suggesting that changes in VSMC morphology and actomyosin activity are core components of the contractile response. Furthermore, we show that microtubule stability is an essential regulator of isolated VSMC contractility. Treatment with either colchicine or paclitaxel uncoupled the morphological and/or traction stress responses of angiotensin II stimulated VSMCs. Our findings support the tensegrity model of cellular mechanics and we demonstrate that microtubules act to balance actomyosin-derived traction stress generation and regulate the morphological responses of VSMCs.

Mechanical programming of arterial smooth muscle cells in health and ageing

Arterial smooth muscle cells (ASMCs), the predominant cell type within the arterial wall, detect and respond to external mechanical forces. These forces can be derived from blood flow (i.e. pressure and stretch) or from the supporting extracellular matrix (i.e. stiffness and topography). The healthy arterial wall is elastic, allowing the artery to change shape in response to changes in blood pressure, a property known as arterial compliance. As we age, the mechanical forces applied to ASMCs change; blood pressure and arterial wall rigidity increase and result in a reduction in arterial compliance. These changes in mechanical environment enhance ASMC contractility and promote disease-associated changes in ASMC phenotype. For mechanical stimuli to programme ASMCs, forces must influence the cell's load-bearing apparatus, the cytoskeleton. Comprised of an interconnected network of actin filaments, microtubules and intermediate filaments, each cytoskeletal component has distinct mechanical properties that enable ASMCs to respond to changes within the mechanical environment whilst maintaining cell integrity. In this review, we discuss how mechanically driven cytoskeletal reorganisation programmes ASMC function and phenotypic switching.

Strengthened capacity of India´s bedaquiline Conditional Access Programme for introducing new drugs and regimens

BACKGROUND: Addressing TB in India is critical to meeting global targets. With the scale-up of diagnostic networks and the availability of new TB drugs, India had the opportunity to improve the detection and treatment outcomes in drug-resistant TB (DR-TB).OBJECTIVE: To document how the introduction of new drugs and regimens is helping India improve the care of DR-TB patients.DESIGN: In 2016, India´s National TB Programme (NTP) introduced bedaquiline (BDQ) under a Conditional Access Programme (BDQ-CAP) at six sites after providing extensive training and strengthening laboratory testing, pre-treatment evaluation, active drug safety monitoring and management (aDSM) and follow-up systems.RESULTS: An interim analysis reflected earlier and better culture conversion rates: 83% of the 620 patients converted within a median time of 60 days. However, 248 serious adverse events were reported, including 73 deaths (12%) and 100 cardiotoxicity events (16.3%). Encouraged by the evidence of safety and efficacy of BDQ, the NTP took steps to systematically expand its access to cover the entire population by 2018.CONCLUSION: The cautious yet focused approach used to introduce BDQ under BDQ-CAP paved the way for the rapid introduction of delamanid, as well as the shorter treatment regimen and the all-oral regimen for DR-TB.

Pharmacological Protein Kinase C Modulators Reveal a Pro-hypertrophic Role for Novel Protein Kinase C Isoforms in Human Induced Pluripotent Stem Cell-Derived Cardiomyocytes

Background: Hypertrophy of cardiomyocytes (CMs) is initially a compensatory mechanism to cardiac overload, but when prolonged, it leads to maladaptive myocardial remodeling, impairing cardiac function and causing heart failure. A key signaling molecule involved in cardiac hypertrophy is protein kinase C (PKC). However, the role of different PKC isoforms in mediating the hypertrophic response remains controversial. Both classical (cPKC) and novel (nPKC) isoforms have been suggested to play a critical role in rodents, whereas the role of PKC in hypertrophy of human CMs remains to be determined. Here, we aimed to investigate the effects of two different types of PKC activators, the isophthalate derivative HMI-1b11 and bryostatin-1, on CM hypertrophy and to elucidate the role of cPKCs and nPKCs in endothelin-1 (ET-1)-induced hypertrophy in vitro.

Methods and Results: We used neonatal rat ventricular myocytes (NRVMs) and human induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CMs) to study the effects of pharmacological PKC modulators and ET-1. We used quantitative reverse transcription PCR to quantify hypertrophic gene expression and high-content analysis (HCA) to investigate CM morphology. In both cell types, ET-1, PKC activation (bryostatin-1 and HMI-1b11) and inhibition of cPKCs (Gö6976) increased hypertrophic gene expression. In NRVMs, these treatments also induced a hypertrophic phenotype as measured by increased recognition, intensity and area of α-actinin and F-actin fibers. Inhibition of all PKC isoforms with Gö6983 inhibited PKC agonist-induced hypertrophy, but could not fully block ET-1-induced hypertrophy. The mitogen-activated kinase kinase 1/2 inhibitor U0126 inhibited PKC agonist-induced hypertrophy fully and ET-1-induced hypertrophy partially. While ET-1 induced a clear increase in the percentage of pro-B-type natriuretic peptide-positive hiPSC-CMs, none of the phenotypic parameters used in HCA directly correlated with gene expression changes or with phenotypic changes observed in NRVMs.

Conclusion: This work shows similar hypertrophic responses to PKC modulators in NRVMs and hiPSC-CMs. Pharmacological PKC activation induces CM hypertrophy via activation of novel PKC isoforms. This pro-hypertrophic effect of PKC activators should be considered when developing PKC-targeted compounds for e.g. cancer or Alzheimer’s disease. Furthermore, this study provides further evidence on distinct PKC-independent mechanisms of ET-1-induced hypertrophy both in NRVMs and hiPSC-CMs.

Outcomes of Category III DOTS treatment in immunocompetent patients with tuberculosis pleural effusion

OBJECTIVES

To study the efficacy and safety of Category III DOTS treatment (intermittent thrice-weekly rifampicin [RMP], isoniazid [INH] and pyrazinamide for 2 months, followed by RMP and INH for 4 months) under India's Revised National Tuberculosis Control Programme in patients with uncomplicated small unilateral pleural effusion (<1500 ml).

DESIGN

This prospective, multicentre, observational study recruited 351 patients between 2006 and 2010. Patients were regularly followed up clinically as well as with ultrasound examination of the chest.

RESULTS

Successful outcome (clinical response with complete resolution on ultrasound examination at 6 months) was seen in 274 patients (78.1%). Efficacy was 88.9% (excluding defaulters), and 94% among those completing follow-up as per protocol. None of the patients received corticosteroids. Other outcomes included treatment extension (n = 26, 7.4%), default (n = 43, 12.2%), treatment failure (n = 3, 0.9%) and death (n = 3, 0.9%). Seventy-nine mild/moderate adverse events and one treatment-related serious adverse event were noted; one patient developed recurrent drug-induced hepatotoxicity. Two patients (0.7%) had relapse/re-infection at 24 months follow-up.

CONCLUSION

Intermittent thrice-weekly treatment for 6 months with three drugs in the intensive phase is effective and safe for unilateral small pleural effusion in immunocompetent patients. Although Category III no longer exists in the programme, the results are reassuring for intermittent treatment in extra-pulmonary TB under programme conditions.

Laser Photolytic Deposition of Thin Films

An excimer laser is used to photochemically deposit thin films of silicon dioxide, silicon nitride, aluminum oxide, and zinc oxide at low temperatures (100–350deg;C). Deposition rates in excess of 3000 Å/min and conformal coverage over vertical walled steps were demonstrated. The films exhibit low defect density and high breakdown voltage and have been characterized using IR spectrophotometry, AES, and C-V analysis. Device compatibility has been studied by using photodeposited films as interlayer dielectrics, diffusion masks, and passivation layers in production CMOS devices.

Additionally, we have deposited metallic films of Al, Mo, W, and Cr over large (>5 cm2) areas using UV photodissociation of trimethylaluminum and the refractory metal hexacarbonyls. Both shiny metallic films as well as black particulate films were obtained depending on the deposition geometry. The black films are shown to grow in columnar grains. The depositions were made at room temperature over pyrex and quartz plates as well as silicon wafers. We have examined the resistivity, adhesion, stress and step coverage of these films. The films exhibited resistivities at most ∼20 times that of the bulk materials and tensile stress no higher than 7 × 109 dynes/cm2

Atomic Layer Chemical Vapor Deposition of Hafnium Oxide Using Anhydrous Hafnium Nitrate Precursor

HfO2 films have been deposited using anhydrous hafnium nitrate (Hf(NO3)4) as a precursor for atomic layer chemical vapor deposition (ALCVD). These films have been characterized using x-ray diffraction, x-ray reflectivity, atomic force microscopy, current vs. voltage, and capacitance vs. voltage measurements. An advantage of this precursor is that it produces smooth and uniform initiation of film deposition on H-terminated silicon surfaces. As deposited films remained amorphous at temperatures below ∼700°C. The effective dielectric constant of the film (neglecting quantum effects) for films less than ∼15 nm thick, was in the range of kfilm ∼ 10-11, while the HfO2 layer value was estimated to be kHfO2 ∼ 12-14. The lower than expected dielectric constant of the film stack is due in part to the presence of an interfacial layer such as HfSiOx. Excess oxygen may play a role in the lower than expected dielectric constant of the HfO2 layer. Breakdown of HfO2 films occurred at ∼5-7 MV/cm. Leakage current was lower than that of SiO2 films of comparable equivalent thickness.

Chemical vapor deposition of graphene films

Graphene films were grown on nickel films and foils using chemical vapor deposition. To date, similar growth has been reported at around 1000 degrees C using methane or ethylene as source gases. However, by using acetylene, we have achieved growth of graphene films between 650 and 700 degrees C. The electrical and optical properties, including high resolution transmission electron microscopy of these films, suggest that this technique is both viable and scalable for potential large area optoelectronic applications.

LIVER RESECTION FOR METASTASES FROM COLORECTAL CANCER

Five percent of patients with liver secondaries from colorectal carcinoma are potentially resectable and several studies have demonstrated significantly improved survival following resection. Two hundred and ten patients operated for colorectal carcinoma were followed up. Computed tomography confirmed potentially resectable metastasis to the liver in 38. On exploration 18 patients who had 4 or less hepatic metastases and no extrahepatic disease, underwent resection of their secondaries. Fourteen were males and 4 females with a mean age of 43.5 (SD 13.6, range 18-72) years. Ten patients presented with synchronous liver metastasis and 8 had metachronous disease. There was no post-operative mortality. All 18 have been followed up. for a median period of 23.5 (range 12-38) months. Seven patients are alive and well with no evidence of recurrence at a median period of 28 months (survival 39%). Four are alive with local recurrence in the liver. Median time to recurrence was 22 months. Seven patients have died of disseminated disease. The disease free survival at 28 months is 39% and the overall survival 61%. A close follow-up protocol for all patient undergoing curative surgery for colorectal cancer is essential, if such patients are to be selected early.