Studying Edema Formation After Release of the Infraspinatus Muscle as an Experimental Model of Rotator Cuff Lesions in Sheep: A Histological Analysis

BACKGROUND

Muscle edema formation and inflammatory processes are early manifestations of acute rotator cuff lesions in sheep. Histological analysis of affected muscles revealed edema formation, inflammatory changes, and muscle tissue disruption in MRs.

HYPOTHESIS

Edema contributes to inflammatory reactions and early muscle fiber degeneration before the onset of fatty infiltration.

STUDY DESIGN

Controlled laboratory study.

METHODS

Osteotomy of the greater tuberosity, including the insertion of the infraspinatus tendon, was performed on 14 sheep. These experimental animal models were divided into 2 groups: a nontrauma group with surgical muscle release alone (7 sheep) and a trauma group with standardized application of additional trauma to the musculotendinous unit (7 sheep). Excisional biopsy specimens of the infraspinatus muscle were taken at 0, 3, and 4 weeks.

RESULTS

Edema formation was histologically demonstrated in both groups and peaked at 3 weeks. At 3 weeks, signs of muscle fiber degeneration were observed. At 4 weeks, ingrowth of loose alveolar and fibrotic tissue between fibers was detected. Fatty tissue was absent. The diameter of muscle fibers increased in both groups, albeit to a lesser degree in the trauma group, and practically normalized at 4 weeks. Immunohistology revealed an increase in macrophage types 1 and 2, as well as inflammatory mediators such as prostaglandin E2 and nuclear factor kappa-light-chain-enhancer of activated B cells.

CONCLUSION

Early muscle edema and concomitant inflammation precede muscle fiber degeneration and fibrosis. Edema formation results from tendon release alone and is only slightly intensified by additional trauma.

CLINICAL RELEVANCE

This study illustrates that early edema formation and inflammation elicit muscle fiber degeneration that precedes fatty infiltration. Should this phenomenon be applicable to human traumatic rotator cuff tears, then surgery should be performed as soon as possible, ideally within the first 21 days after injury.

Torsion constants and virtual mechanical tests are valid image-based surrogate measures of ovine fracture healing

In large animal studies, the mechanical reintegration of the bone fragments is measured using postmortem physical testing, but these assessments can only be performed once, after sacrifice. Image-based virtual mechanical testing is an attractive alternative because it could be used to monitor healing longitudinally. However, the procedures and software required to perform finite element analysis (FEA) on subject-specific models for virtual mechanical testing can be time consuming and costly. Accordingly, the goal of this study was to determine whether a simpler image-based geometric measure-the torsion constant, sometimes known as polar moment of inertia-can be reliably used as a surrogate measure of bone healing in large animals. To achieve this, postmortem biomechanical testing and microCT scans were analyzed for a total of 33 operated and 20 intact ovine tibiae. An image-processing procedure to compute the attenuation-weighted torsion constant from the microCT scans was developed in MATLAB and this code has been made freely available. Linear regression analysis was performed between the postmortem biomechanical data, the results of virtual mechanical testing using FEA, and the torsion constants measured from the scans. The results showed that virtual mechanical testing is the most reliable surrogate measure of postmortem torsional rigidity, having strong correlations and high absolute agreement. However, when FEA is not practical, the torsion constant is a viable alternative surrogate measure that is moderately correlated with postmortem torsional rigidity and can be readily calculated.

Rotator Cuff Repair and Overlay Augmentation by Direct Interlocking of a Nonwoven Polyethylene Terephthalate Patch Into the Tendon: Evaluation in an Ovine Model

BACKGROUND

Arthroscopic repair of large rotator cuff tendon tears is associated with high rates of retear. Construct failure often occurs at the suture-tendon interface. Patch augmentation can improve mechanical strength and healing at this interface.

PURPOSE

To introduce a novel technique for suture-free attachment of an overlaid patch and evaluate its biomechanical strength and biological performance.

STUDY DESIGN

Descriptive and controlled laboratory studies.

METHODS

An established ovine model of partial infraspinatus tendon resection and immediate repair was used. After a nonwoven polyethylene terephthalate patch was overlaid to the resected tendon, a barbed microblade was used to draw fibers of the patch directly into the underlying tissue. In vivo histological assessment of healing was performed at 6 and 13 weeks after implantation. Ex vivo models were used to characterize primary repair strength of the suture-free patch fixation to tendon. Additional ex vivo testing assessed the potential of the technique for patch overlay augmentation of suture-based repair.

RESULTS

The in vivo study revealed no macroscopic evidence of adverse tissue reactions to the interlocked patch fibers. Histological testing indicated a normal host healing response with minimal fibrosis. Uniform and aligned tissue ingrowth to the core of the patch was observed from both the tendon and the bone interfaces to the patch. There was no evident retraction of the infraspinatus muscle, lengthening of the tendon, or tendon gap formation over 13 weeks. Ex vivo testing revealed that direct patch interlocking yielded tendon purchase equivalent to a Mason-Allen suture (150 ± 58 vs 154 ± 49 N, respectively; P = .25). In an overlay configuration, fiber interlocked patch augmentation increased Mason-Allen suture retention strength by 88% (from 221 ± 43 N to 417 ± 86 N; P < .01) with no detectable difference in repair stiffness.

CONCLUSION

Testing in an ovine model of rotator cuff tendon repair suggested that surgical interlocking of a nonwoven medical textile can provide effective biomechanical performance, support functional tissue ingrowth, and help avoid musculotendinous retraction after surgical tendon repair.

CLINICAL RELEVANCE

The novel technique may facilitate patch augmentation of rotator cuff repairs.

Autologous and Allogeneic Cytotherapies for Large Knee (Osteo)Chondral Defects: Manufacturing Process Benchmarking and Parallel Functional Qualification

Cytotherapies are often necessary for the management of symptomatic large knee (osteo)-chondral defects. While autologous chondrocyte implantation (ACI) has been clinically used for 30 years, allogeneic cells (clinical-grade FE002 primary chondroprogenitors) have been investigated in translational settings (Swiss progenitor cell transplantation program). The aim of this study was to comparatively assess autologous and allogeneic approaches (quality, safety, functional attributes) to cell-based knee chondrotherapies developed for clinical use. Protocol benchmarking from a manufacturing process and control viewpoint enabled us to highlight the respective advantages and risks. Safety data (telomerase and soft agarose colony formation assays, high passage cell senescence) and risk analyses were reported for the allogeneic FE002 cellular active substance in preparation for an autologous to allogeneic clinical protocol transposition. Validation results on autologous bioengineered grafts (autologous chondrocyte-bearing Chondro-Gide scaffolds) confirmed significant chondrogenic induction (COL2 and ACAN upregulation, extracellular matrix synthesis) after 2 weeks of co-culture. Allogeneic grafts (bearing FE002 primary chondroprogenitors) displayed comparable endpoint quality and functionality attributes. Parameters of translational relevance (transport medium, finished product suturability) were validated for the allogeneic protocol. Notably, the process-based benchmarking of both approaches highlighted the key advantages of allogeneic FE002 cell-bearing grafts (reduced cellular variability, enhanced process standardization, rationalized logistical and clinical pathways). Overall, this study built on our robust knowledge and local experience with ACI (long-term safety and efficacy), setting an appropriate standard for further clinical investigations into allogeneic progenitor cell-based orthopedic protocols.

Studying Edema Formation After Release of the Infraspinatus Tendon as an Experimental Model of Rotator Cuff Tears in Sheep: A Preliminary Imaging and Morphological Analysis

BACKGROUND

The cause, extent, and role of muscle edema for muscle degeneration are unknown and not considered in the current literature. In vivo experiments were designed to prove muscle edema formation in the early period in a sheep model of acute rotator cuff tears.

HYPOTHESIS

Muscle edema occurs after tendon release with or without additional stretching trauma and may be associated with muscle retraction and subsequent muscle degeneration.

STUDY DESIGN

Controlled laboratory study.

METHODS

A sheep model with acute release of the infraspinatus tendon was used. An osteotomy of the greater tuberosity, including the insertion of the infraspinatus tendon, was performed in 14 sheep. To demonstrate presence of edema, magnetic resonance imaging scans were performed at 0, 2, and 4 weeks using T1-weighted, T2-weighted, proton density-weighted, and Dixon sequences. Excisional biopsy specimens were taken at 0, 3, and 4 weeks (histological results will be reported in a later publication). Two injury models were created: a nontrauma group that consisted of muscle release alone and a trauma group that included additional standardized traction to the musculotendinous unit. Evaluation of T1- and T2-weighted images included calculation of pennation angle, muscle fiber length, signal intensity (edema), and muscle volume. Muscle wet weight and volume were measured at sacrifice.

RESULTS

Edema formation was shown in all sheep and slightly more pronounced in the trauma group, where muscle intensity increased significantly between time point 0 (200 Grey Value (GV)) and weeks 2, 3, and 4 (300 GV). Edema formation started early after tendon release with a plateau between 3 and 4 weeks. Deterioration of muscle fiber bundles began also after tendon release with a peak at 4 weeks. Muscle volume decreased steadily over time.

CONCLUSION

Muscle edema appeared early after rotator cuff tendon release, was more pronounced in the trauma group, and reached a plateau after 3 to 4 weeks. Muscle fatty content decreased within the short period of 4 weeks owing to a dilution effect. Muscle edema seems to be an essential factor in cuff tears and subsequent muscle retraction and degeneration.

CLINICAL RELEVANCE

This study demonstrates a new type of muscle edema of retraction and describes the characteristics of edema associated with a retracted rotator cuff tear.

Biomechanical duality of fracture healing captured using virtual mechanical testing and validated in ovine bones

Bone fractures commonly repair by forming a bridging structure called callus, which begins as soft tissue and gradually ossifies to restore rigidity to the bone. Virtual mechanical testing is a promising technique for image-based assessment of structural bone healing in both preclinical and clinical settings, but its accuracy depends on the validity of the material model used to assign tissue mechanical properties. The goal of this study was to develop a constitutive model for callus that captures the heterogeneity and biomechanical duality of the callus, which contains both soft tissue and woven bone. To achieve this, a large-scale optimization analysis was performed on 2363 variations of 3D finite element models derived from computed tomography (CT) scans of 33 osteotomized sheep under normal and delayed healing conditions. A piecewise material model was identified that produced high absolute agreement between virtual and physical tests by differentiating between soft and hard callus based on radiodensity. The results showed that the structural integrity of a healing long bone is conferred by an internal architecture of mineralized hard callus that is supported by interstitial soft tissue. These findings suggest that with appropriate material modeling, virtual mechanical testing is a reliable surrogate for physical biomechanical testing.

Engineered nasal cartilage for the repair of osteoarthritic knee cartilage defects

[Figure: see text].

Virtual mechanical tests out-perform morphometric measures for assessment of mechanical stability of fracture healing in vivo

Finite element analysis with models derived from computed tomography (CT) scans is potentially powerful as a translational research tool because it can achieve what animal studies and cadaver biomechanics cannot-low-risk, noninvasive, objective assessment of outcomes in living humans who have actually experienced the injury, or treatment being studied. The purpose of this study was to assess the validity of CT-based virtual mechanical testing with respect to physical biomechanical tests in a large animal model. Three different tibial osteotomy models were performed on 44 sheep. Data from 33 operated limbs and 20 intact limbs was retrospectively analyzed. Radiographic union scoring was performed on the operated limbs and physical torsional tests were performed on all limbs. Morphometric measures and finite element models were developed from CT scans and virtual torsional tests were performed to assess healing with four material assignment techniques. In correlation analysis, morphometric measures and radiographic scores were unreliable predictors of biomechanical rigidity, while the virtual torsion test results were strongly and significantly correlated with measured biomechanical test data, with high absolute agreement. Overall, the results validated the use of virtual mechanical testing as a reliable in vivo assessment of structural bone healing. This method is readily translatable to clinical evaluation for noninvasive assessment of the healing progress of fractures with minimal risk. Clinical significance: virtual mechanical testing can be used to reliably and noninvasively assess the rigidity of a healing fracture using clinical-resolution CT scans and that this measure is superior to morphometric and radiographic measures.

Development of Standardized Fetal Progenitor Cell Therapy for Cartilage Regenerative Medicine: Industrial Transposition and Preliminary Safety in Xenogeneic Transplantation

Diverse cell therapy approaches constitute prime developmental prospects for managing acute or degenerative cartilaginous tissue affections, synergistically complementing specific surgical solutions. Bone marrow stimulation (i.e., microfracture) remains a standard technique for cartilage repair promotion, despite incurring the adverse generation of fibrocartilagenous scar tissue, while matrix-induced autologous chondrocyte implantation (MACI) and alternative autologous cell-based approaches may partly circumvent this effect. Autologous chondrocytes remain standard cell sources, yet arrays of alternative therapeutic biologicals present great potential for regenerative medicine. Cultured human epiphyseal chondro-progenitors (hECP) were proposed as sustainable, safe, and stable candidates for chaperoning cartilage repair or regeneration. This study describes the development and industrial transposition of hECP multi-tiered cell banking following a single organ donation, as well as preliminary preclinical hECP safety. Optimized cell banking workflows were proposed, potentially generating millions of safe and sustainable therapeutic products. Furthermore, clinical hECP doses were characterized as non-toxic in a standardized chorioallantoic membrane model. Lastly, a MACI-like protocol, including hECPs, was applied in a three-month GLP pilot safety evaluation in a caprine model of full-thickness articular cartilage defect. The safety of hECP transplantation was highlighted in xenogeneic settings, along with confirmed needs for optimal cell delivery vehicles and implantation techniques favoring effective cartilage repair or regeneration.

Imaging Modalities to Assess Fracture Healing

PURPOSE OF REVIEW

This review discusses imaging modalities for fracture repair assessment, with an emphasis on pragmatic clinical and translational use, best practices for implementation, and challenges and opportunities for continuing research.

RECENT FINDINGS

Semiquantitative radiographic union scoring remains the clinical gold standard, but has questionable reliability as a surrogate indicator of structural bone healing, particularly in early-stage, complex, or compromised healing scenarios. Alternatively, computed tomography (CT) scanning enables quantitative assessment of callus morphometry and mechanics through the use of patient-specific finite-element models. Dual-energy X-ray absorptiometry (DXA) scanning and radiostereometric analysis (RSA) are also quantitative, but technically challenging. Nonionizing magnetic resonance (MR) and ultrasound imaging are of high interest, but require development to enable quantification of 3D mineralized structures. Emerging image-based methods for quantitative assessment of bone healing may transform clinical research design by displacing binary outcomes classification (union/nonunion) and ultimately enhance clinical care by enabling early nonunion detection.

Development of a cost-effective method for platelet-rich plasma (PRP) preparation for topical wound healing

Platelet-rich plasma (PRP) is a volume of plasma fraction of autologous blood having platelet concentrations above baseline whole-blood values due to processing and concentration. PRP is used in various surgical fields to enhance soft-tissue and bone healing by delivering supra-physiological concentrations of autologous platelets at the site of tissue damage. These preparations may provide a good cellular source of various growth factors and cytokines, and modulate tissue response to injury. Common clinically available materials for blood preparations combined with a two-step centrifugation protocol at 280g each, to ensure cellular component integrity, provided platelet preparations which were concentrated 2-3 fold over total blood values. Costs were shown to be lower than those of other methods which require specific equipment and high-cost disposables, while safety and traceability can be increased. PRP can be used for the treatment of wounds of all types including burns and also of split-thickness skin graft donor sites, which are frequently used in burn management. The procedure can be standardized and is easy to adapt in clinical settings with minimal infrastructure, thus enabling large numbers of patients to benefit from a form of cellular therapy.

Epiphyseal Chondroprogenitors Provide a Stable Cell Source for Cartilage Cell Therapy

Articular cartilage regeneration poses particularly tough challenges for implementing cell-based therapies. Many cell types have been investigated looking for a balanced combination of responsiveness and stability, yet techniques are still far from defining a gold standard. The work presented focuses on the reliable expansion and characterization of a clinical grade human epiphyseal chondroprogenitor (ECP) cell bank from a single tissue donation. A parental human ECP cell bank was established, which provides the seed material for master and working cell banks. ECPs were investigated at both low and high cumulative population doublings looking at morphology, monolayer expansion kinetics, resistance to cryogenic shock, colony-forming efficiency, and cell surface markers. Three-dimensional micropellet assays were used to determine spontaneous extracellular matrix deposition at varying population doublings and monolayer 2D differentiation studies were undertaken to assess the propensity for commitment into other lineages and their stability. ECPs exhibited remarkable homogeneity in expansion with a steady proliferative potential averaging three population doublings over 8 days. Surface marker analysis revealed no detectable contaminating subpopulations or population enrichment during prolonged culture periods. Despite a slight reduction in Sox9 expression levels at higher population doublings in monolayer, nuclear localization was equivalent both in monolayer and in micropellet format. Equally, ECPs were capable of depositing glycosaminoglycans and producing aggrecan, collagen I, and collagen II in 3D pellets both at low and high population doublings indicating a stable spontaneous chondrogenic potential. Osteogenic induction was differentially restricted in low and high population doublings as observed by Von Kossa staining of calcified matrix, with a notable collagen X, MMP13, and ADAMTS5 downregulation. Rare adipogenic induction was seen as evidenced by cytoplasmic lipid accumulation detectable by Oil Red O staining. These findings highlight the reliability, stability, and responsiveness of ECPs over prolonged culture, making them ideal candidates in defining novel strategies for cartilage regeneration.