Photoswitching of arylazopyrazoles upon S1 (nπ*) excitation studied by transient absorption spectroscopy and ab initio molecular dynamics

Arylazopyrazoles (AAPs) are an important class of molecular photoswitches with high photostationary states (PSS) and long thermal lifetimes. The ultrafast photoisomerization of four water-soluble arylazopyrazoles, all of them featuring an ortho-dimethylated pyrazole ring, is studied by narrowband femtosecond transient absorption spectroscopy and ab initio molecular dynamics simulations. Upon S1 (nπ*) photoexcitation of the planar E-isomers (E-AAPs), excited-state bi-exponential decays with time constants τ1 in the 220-440 fs range and τ2 in the 1.4-1.8 ps range are observed, comparable to those reported for azobenzene (AB). This is indicative of the same photoisomerization mechanism as has been reported for ABs. In contrast to the planar E-AAPs, a twisted E-AAP with two methyl groups in ortho-position of the phenyl ring displays faster initial photoswitching with τ1 = 170 ± 10 fs and τ2 = 1.6 ± 0.1 ps. Our static DFT calculations and ab initio molecular dynamics simulations of E-AAPs on the S0 and S1 potential energy surfaces suggest that twisted E-isomer azo photoswitches exhibit faster initial photoisomerization dynamics out of the Franck-Condon region due to a weaker π-coordination of the central CNNC unit to the aromatic ligands.

Convergence of Surface-Enhanced Raman Scattering with Molecular Diagnostics: A Perspective on Future Directions

Molecular diagnostics (MD) is widely employed in multiple scientific disciplines, such as oncology, pathogen detection, forensic investigations, and the pharmaceutical industry. Techniques such as polymerase chain reaction (PCR) revolutionized the rapid and accurate identification of nucleic acids (DNA, RNA). More recently, CRISPR and its CRISPR-associated protein (Cas) have been a ground-breaking discovery that is the latest revolution in molecular biology, including MD. Surface-enhanced Raman scattering (SERS) is a very attractive alternative to fluorescence as the currently most widely used optical readout in MD. In this Perspective, milestones in the development of MD, SERS-PCR, and next-generation approaches to MD, such as Specific High-Sensitivity Enzymatic Reporter UnLOCKing (SHERLOCK) and DNA Endonuclease-Targeted CRISPR Trans Reporter (DETECTR), are briefly summarized. Our perspective on the future convergence of SERS with MD is focused on SERS-based CRISPR/Cas (SERS-CRISPR) since we anticipate many promising applications in this rapidly emerging field. We predict that major future developments will exploit the advantages of real-time monitoring with the superior brightness, photostability, and spectral multiplexing potential of SERS nanotags in an automated workflow for rapid assays under isothermal, amplification-free conditions.

Curvature dependent onset of quantum tunneling in subnanometer gaps

The quantum tunneling in subnanometer gap sizes in gold dimers is studied in order to account for the dependency of the onset of quantum tunneling on the dimer's radius and accordingly the gap wall's curvature, realized in experiments. Several nanodimers both nanowires and nanospheres with various radii and gap sizes are modelled and simulated based on the quantum corrected model, determining the onset of the quantum tunneling. Results show that the onset of quantum tunneling is both dependent on the gap size as well as on the dimer's radius. As larger dimers result in larger effective conductivity volumes, the influence of the quantum tunneling begins in larger gap sizes in larger dimers.

Impact of bimetallic interface design on heat generation in plasmonic Au/Pd nanostructures studied by single-particle thermometry

Localized surface plasmons are lossy and generate heat. However, accurate measurement of the temperature of metallic nanoparticles under illumination remains an open challenge, creating difficulties in the interpretation of results across plasmonic applications. Particularly, there is a quest for understanding the role of temperature in plasmon-assisted catalysis. Bimetallic nanoparticles combining plasmonic with catalytic metals are raising increasing interest in artificial photosynthesis and the production of solar fuels. Here, we perform single-particle thermometry measurements to investigate the link between morphology and light-to-heat conversion of colloidal Au/Pd nanoparticles with two different configurations: core-shell and core-satellite. It is observed that the inclusion of Pd as a shell strongly reduces the photothermal response in comparison to the bare cores, while the inclusion of Pd as satellites keeps photothermal properties almost unaffected. These results contribute to a better understanding of energy conversion processes in plasmon-assisted catalysis.

Tuning the Electronic Properties of Platinum in Hybrid-Nanoparticle Assemblies for use in Hydrogen Evolution Reaction

Platinum is the best electrocatalyst for the hydrogen evolution reaction (HER). Here, we demonstrate that by contact electrification of Pt nanoparticle satellites on a gold or silver core, the Fermi level of Pt can be tuned. The electronic properties of Pt in such hybrid nanocatalysts were experimentally characterized by X-ray photoelectron spectroscopy (XPS) and surface-enhanced Raman scattering (SERS) with the probe molecule 2,6-dimethyl phenyl isocyanide (2,6-DMPI). Our experimental findings are corroborated by a hybridization model and density functional theory (DFT) calculations. Finally, we demonstrate that tuning of the Fermi level of Pt results in reduced or increased overpotentials in water splitting.

Particle Size-Dependent Onset of the Tunneling Regime in Ideal Dimers of Gold Nanospheres

We report on the nanoparticle-size-dependent onset of quantum tunneling of electrons across the subnanometer gaps in three different sizes (30, 50, and 80 nm) of highly uniform gold nanosphere (AuNS) dimers. For precision plasmonics, the gap distance is systematically controlled at the level of single C-C bonds via a series of alkanedithiol linkers (C₂-C₁₆). Parallax-corrected high-resolution transmission electron microscope (HRTEM) imaging and subsequent tomographic reconstruction are employed to resolve the nm to subnm interparticle gap distances in AuNS dimers. Single-particle scattering experiments on three different sizes of AuNS dimers reveal that for the larger dimers the onset of quantum tunneling regime occurs at larger gap distances: 0.96 ± 0.04 nm (C₆) for 80 nm, 0.83 ± 0.03 nm (C₅) for 50 nm, and 0.72 ± 0.02 nm (C₄) for 30 nm dimers. 2D nonlocal and quantum-corrected model (QCM) calculations qualitatively explain the physical origin for this experimental observation: the lower curvature of the larger particles leads to a higher tunneling current due to a larger effective conductivity volume in the gap. Our results have possible implications in scenarios where precise geometrical control over plasmonic properties is crucial such as in hybrid (molecule-metal) and/or quantum plasmonic devices. More importantly, this study constitutes the closest experimental results to the theory for a 3D sphere dimer system and offers a reference data set for comparison with theory/simulations.

A switchable DNA origami/plasmonic hybrid device with a precisely tuneable DNA-free interparticle gap

We here show a reconfigurable DNA/plasmonic nanodevice with a precisely tunable and DNA-free interparticle gap. The nanodevice comprises two DNA boxes for the size-selective incorporation of nanoparticles in a face-to-face orientation and an underlying switchable DNA platform for the controlled and reversible adjustment of the interparticle distance.

Gold Nanorods Induce Endoplasmic Reticulum Stress and Autocrine Inflammatory Activation in Human Neutrophils

Gold nanorods (AuNRs) are promising agents for diverse biomedical applications such as drug and gene delivery, bioimaging, and cancer treatment. Upon in vivo application, AuNRs quickly interact with cells of the immune system. On the basis of their strong intrinsic phagocytic activity, polymorphonuclear neutrophils (PMNs) are specifically equipped for the uptake of particulate materials such as AuNRs. Therefore, understanding the interaction of AuNRs with PMNs is key for the development of safe and efficient therapeutic applications. In this study, we investigated the uptake, intracellular processing, and cell biological response induced by AuNRs in PMNs. We show that uptake of AuNRs mainly occurs via phagocytosis and macropinocytosis with rapid deposition of AuNRs in endosomes within 5 min. Within 60 min, AuNR uptake induced an unfolded protein response (UPR) along with induction of inositol-requiring enzyme 1 α (IREα) and features of endoplasmic reticulum (ER) stress. This early response was followed by a pro-inflammatory autocrine activation loop that involves LOX1 upregulation on the cell surface and increased secretion of IL8 and MMP9. Our study provides comprehensive mechanistic insight into the interaction of AuNRs with immune cells and suggests potential targets to limit the unwanted immunopathological activation of PMNs during application of AuNRs.

The role of DNA nanostructures in the catalytic properties of an allosterically regulated protease

DNA-scaffolded enzymes typically show altered kinetic properties; however, the mechanism behind this phenomenon is still poorly understood. We address this question using thrombin, a model of allosterically regulated serine proteases, encaged into DNA origami cavities with distinct structural and electrostatic features. We compare the hydrolysis of substrates that differ only in their net charge due to a terminal residue far from the cleavage site and presumably involved in the allosteric activation of thrombin. Our data show that the reaction rate is affected by DNA/substrate electrostatic interactions, proportionally to the degree of DNA/enzyme tethering. For substrates of opposite net charge, this leads to an inversion of the catalytic response of the DNA-scaffolded thrombin when compared to its freely diffusing counterpart. Hence, by altering the electrostatic environment nearby the encaged enzyme, DNA nanostructures interfere with charge-dependent mechanisms of enzyme-substrate recognition and may offer an alternative tool to regulate allosteric processes through spatial confinement.

Rapid and Sensitive SERS-Based Lateral Flow Test for SARS-CoV2-Specific IgM/IgG Antibodies

As an immune response to COVID-19 infection, patients develop SARS-CoV-2-specific IgM/IgG antibodies. Here, we compare the performance of a conventional lateral flow assay (LFA) with a surface-enhanced Raman scattering (SERS)-based LFA test for the detection of SARS-CoV-2-specific IgM/IgG in sera of COVID-19 patients. Sensitive detection of IgM might enable early serological diagnosis of acute infections. Rapid detection in serum using a custom-built SERS reader is at least an order of magnitude more sensitive than the conventional LFAs with naked-eye detection. For absolute quantification and the determination of the limit of detection (LOD), a set of reference measurements using purified (total) IgM in buffer was performed. In this purified system, the sensitivity of SERS detection is even 7 orders of magnitude higher: the LOD for SERS was ca. 100 fg/mL compared to ca. 1 μg/mL for the naked-eye detection. This outlines the high potential of SERS-based LFAs in point-of-care testing once the interference of serum components with the gold conjugates and the nitrocellulose membrane is minimized.

A fresh look at the structure of aromatic thiols on Au surfaces from theory and experiment

A detailed study of the adsorption structure of self-assembled monolayers of 4-nitrothiophenol on the Au(111) surface was performed from a theoretical perspective via first-principles density functional theory calculations and experimentally by Raman and vibrational sum frequency spectroscopy (vSFS) with an emphasis on the molecular orientation. Simulations-including an explicit van der Waals (vdW) description-for different adsorbate structures, namely, for (3×3), (2 × 2), and (3 × 3) surface unit cells, reveal a significant tilting of the molecules toward the surface with decreasing coverage from 75° down to 32° tilt angle. vSFS suggests a tilt angle of 50°, which agrees well with the one calculated for a structure with a coverage of 0.25. Furthermore, calculated vibrational eigenvectors and spectra allowed us to identify characteristic in-plane (NO₂ scissoring) and out-of-plane (C-H wagging) modes and to predict their strength in the spectrum in dependence of the adsorption geometry. We additionally performed calculations for biphenylthiol and terphenylthiol to assess the impact of multiple aromatic rings and found that vdW interactions are significantly increasing with this number, as evidenced by the absorption energy and the molecule adopting a more upright-standing geometry.

Prospects of ultraviolet resonance Raman spectroscopy in supramolecular chemistry on proteins

Ultraviolet resonance Raman scattering (UVRR) has been frequently used for studying peptide and protein structure and dynamics, while applications in supramolecular chemistry are quite rare. Since UVRR offers the additional advantages of chromophore selectivity and high sensitivity compared with conventional non-resonant Raman scattering, it is ideally suited for label-free probing of relatively small artificial/supramolecular ligands exhibiting electronic resonances in the UV. In this perspective article, we first summarize results of UVRR spectroscopy in supramolecular chemistry in the context of peptide/protein recognition. We focus on selected artificial ligands which were rationally designed as selective carboxylate binders (guanidiniocarbonyl pyrrole, GCP, and guanidiniocarbonyl indole, GCI) and selective lysine binder (molecular tweezer, CLR01), respectively, via a combination of non-covalent interactions involving electrostatics, hydrogen bonding, and hydrophobic effects/van der Waals forces. Current limitations of applying UVRR as a universally applicable method for label-free and site-specific probing of molecular recognition between supramolecular ligands and proteins are highlighted. We then propose solutions to overcome these limitations for transforming UVRR spectroscopy into a generic tool in supramolecular chemistry on proteins, with an emphasis on mono- and multivalent GCP- and GCI-based ligands. Finally, we outline specific cases of supramolecular ligands such as molecular tweezers where alternative approaches such as laser-based mid-IR spectroscopy are required since UVRR can intrinsically not provide the required molecular information.

Ultraviolet resonance Raman spectroscopy with a continuously tunable picosecond laser: Application to the supramolecular ligand guanidiniocarbonyl pyrrole (GCP)

We present a UVRR spectroscopy setup which is equipped with a picosecond pulsed laser excitation source continuously tunable in the 210-2600 nm wavelength range. This laser source is based on a three-stage optical parametric amplifier (OPA) pumped by a bandwidth-compressed second harmonic output of an amplified Yb:KGW laser. It provides <15 cm^-1 linewidth pulses below 270 nm, which is sufficient for resolving Raman lines of samples in condensed phase studies. For demonstrating the capability of this tunable setup for UVRR spectroscopy we present its application to the artificial ligand guanidiniocarbonyl pyrrole (GCP), a carboxylate binder used in peptide and protein recognition. A UVRR excitation study in the range 244-310 nm was performed for identifying the optimum laser excitation wavelength for UVRR spectroscopy of this ligand (λ_max = 298 nm) at submillimolar concentrations (400 µM) in aqueous solution. The optimum UVRR spectrum is observed for laser excitation with λ_exc = 266 nm. Only in the relatively narrow range of λ_exc = 266-275 nm UVRR spectra with a sufficiently high signal-to-noise ratio and without severe interference from autofluorescence (AF) were detectable. At longer excitation wavelengths the UVRR signal is masked by AF. At shorter excitation wavelengths the UVRR spectrum is sufficiently separated from the AF, but the resonance enhancement is not sufficient. The presented tunable UVRR setup provides the flexibility to also identify optimum conditions for other supramolecular ligands for peptide/protein recognition.

Site-specific facet protection of gold nanoparticles inside a 3D DNA origami box: a tool for molecular plasmonics

Bare gold nanocubes and nanospheres with different sizes are incorporated into a rationally designed 3D DNA origami box. The encaged particles expose a gold surface accessible for subsequent site-specific functionalization, for example, for applications in molecular plasmonics such as SERS or SEF.

In Situ Photothermal Response of Single Gold Nanoparticles through Hyperspectral Imaging Anti-Stokes Thermometry

Several fields of applications require a reliable characterization of the photothermal response and heat dissipation of nanoscopic systems, which remains a challenging task for both modeling and experimental measurements. Here, we present an implementation of anti-Stokes thermometry that enables the in situ photothermal characterization of individual nanoparticles (NPs) from a single hyperspectral photoluminescence confocal image. The method is label-free, potentially applicable to any NP with detectable anti-Stokes emission, and does not require any prior information about the NP itself or the surrounding media. With it, we first studied the photothermal response of spherical gold NPs of different sizes on glass substrates, immersed in water, and found that heat dissipation is mainly dominated by the water for NPs larger than 50 nm. Then, the role of the substrate was studied by comparing the photothermal response of 80 nm gold NPs on glass with sapphire and graphene, two materials with high thermal conductivity. For a given irradiance level, the NPs reach temperatures 18% lower on sapphire and 24% higher on graphene than on bare glass. The fact that the presence of a highly conductive material such as graphene leads to a poorer thermal dissipation demonstrates that interfacial thermal resistances play a very significant role in nanoscopic systems and emphasize the need for in situ experimental thermometry techniques. The developed method will allow addressing several open questions about the role of temperature in plasmon-assisted applications, especially ones where NPs of arbitrary shapes are present in complex matrixes and environments.

UV resonance Raman spectroscopy of the supramolecular ligand guanidiniocarbonyl indole (GCI) with 244 nm laser excitation

Ultraviolet resonance Raman (UVRR) spectroscopy is a powerful vibrational spectroscopic technique for the label-free monitoring of molecular recognition of peptides or proteins with supramolecular ligands such as guanidiniocarbonyl pyrroles (GCPs). The use of UV laser excitation enables Raman binding studies of this class of supramolecular ligands at submillimolar concentrations in aqueous solution and provides a selective signal enhancement of the carboxylate binding site (CBS). A current limitation for the extension of this promising UVRR approach from peptides to proteins as binding partners for GCPs is the UV-excited autofluorescence from aromatic amino acids observed for laser excitation wavelengths >260 nm. These excitation wavelengths are in the electronic resonance with the GCP for achieving both a signal enhancement and the selectivity for monitoring the CBS, but the resulting UVRR spectrum overlaps with the UV-excited autofluorescence from the aromatic binding partners. This necessitates the use of a laser excitation <260 nm for spectrally separating the UVRR spectrum of the supramolecular ligand from the UV-excited autofluorescence of the peptide or protein. Here, we demonstrate the use of UVRR spectroscopy with 244 nm laser excitation for the characterization of GCP as well as guanidiniocarbonyl indole (GCI), a next generation supramolecular ligand for the recognition of carboxylates. For demonstrating the feasibility of the UVRR binding studies without an interference from the disturbing UV-excited autofluorescence, benzoic acid (BA) was chosen as an aromatic binding partner for GCI. We also present the UVRR results from the binding of GCI to the ubiquitous RGD sequence (arginylglycylaspartic acid) as a biologically relevant peptide. In the case of RGD, the more pronounced differences between the UVRR spectra of the free and complexed GCI (1:1 mixture) clearly indicate a stronger binding of GCI to RGD compared with BA. A tentative assignment of the experimentally observed changes upon molecular recognition is based on the results from density functional theory (DFT) calculations.

Comparability of Raman Spectroscopic Configurations: A Large Scale Cross-Laboratory Study

The variable configuration of Raman spectroscopic platforms is one of the major obstacles in establishing Raman spectroscopy as a valuable physicochemical method within real-world scenarios such as clinical diagnostics. For such real world applications like diagnostic classification, the models should ideally be usable to predict data from different setups. Whether it is done by training a rugged model with data from many setups or by a primary-replica strategy where models are developed on a 'primary' setup and the test data are generated on 'replicate' setups, this is only possible if the Raman spectra from different setups are consistent, reproducible, and comparable. However, Raman spectra can be highly sensitive to the measurement conditions, and they change from setup to setup even if the same samples are measured. Although increasingly recognized as an issue, the dependence of the Raman spectra on the instrumental configuration is far from being fully understood and great effort is needed to address the resulting spectral variations and to correct for them. To make the severity of the situation clear, we present a round robin experiment investigating the comparability of 35 Raman spectroscopic devices with different configurations in 15 institutes within seven European countries from the COST (European Cooperation in Science and Technology) action Raman4clinics. The experiment was developed in a fashion that allows various instrumental configurations ranging from highly confocal setups to fibre-optic based systems with different excitation wavelengths. We illustrate the spectral variations caused by the instrumental configurations from the perspectives of peak shifts, intensity variations, peak widths, and noise levels. We conclude this contribution with recommendations that may help to improve the inter-laboratory studies.

6-Color/1-Target Immuno-SERS Microscopy on the Same Single Cancer Cell

There is an urgent clinical need for multicolor imaging of single cancer cells (no ensemble averaging) for identifying heterogenous expression of predictive biomarkers. Specifically, the comprehensive characterization of single disseminated tumor cells (sDTCs) responsible for metastatic relapse is the key to personalized therapy for patients. Current bioimaging methods lack the necessary multicolor capacity and suffer from background/autofluorescence. Both these central limitations can be overcome by immuno-SERS microscopy using SERS nanotags conjugated to antibodies. Here, we demonstrate the proof of concept for 6-color iSERS microscopy on the same single cancer cell. Human epidermal growth factor receptor 2 (HER2), the most prominent breast cancer marker, is localized on the membrane of single SkBr-3 cells, which overexpress HER2 and are an accepted model for sDTCs in breast cancer. This work paves the way for future multicolor/multitarget imaging for characterizing heterogeneous protein expression at the single-cell level.

Rational design of thiolated polyenes as trifunctional Raman reporter molecules in surface-enhanced Raman scattering nanotags for cytokine detection in a lateral flow assay

The characteristic vibrational spectroscopic fingerprint of Raman reporter molecules adsorbed on noble metal nanoparticles is employed for the identification of target proteins by the corresponding surface-enhanced Raman scattering (SERS) nanotag-labeled antibodies. Here, we present the modular synthesis of thiolated polyenes with two to five C═C double bonds introduced via stepwise Wittig reactions. The experimental characterization of their electronic and vibrational properties is complemented by density functional theory calculations. Highly SERS-active nanotags are generated by using the thiolated polyenes as Raman reporter molecules in Au/Au core/satellite supraparticles with multiple hot spots. The cytokines IL-1β and IFN-γ are detected in a duplex SERS-based lateral flow assay on a nitrocellulose test strip by Raman microscopy. The thiolated polyenes are suitable for use in immuno-SERS applications such as point-of-care testing as well as cellular and tissue imaging.

Localization of PD-L1 on single cancer cells by iSERS microscopy with Au/Au core/satellite nanoparticles

Programmed cell death-ligand 1 (PD-L1) is an important predictive biomarker. The detection of PD-L1 can be crucial for patients with advanced cancer where the use of immunotherapy is considered. Here, we demonstrate the use of immuno-SERS microscopy (iSERS) for localizing PD-L1 on single cancer SkBr-3 cells. A central advantage of iSERS is that the disturbing autofluorescence from cells and tissues can be efficiently minimized by red to near-infrared laser excitation. In this study we employed Au/Au core/satellite nanoparticles as SERS nanotags because of their remarkable signal brightness and colloidal stability upon red laser excitation. False-color iSERS images of the positive and negative controls clearly reveal the specific localization of PD-L1 with SERS nanotag-labeled antibodies.

Towards Reliable and Quantitative Surface-Enhanced Raman Scattering (SERS): From Key Parameters to Good Analytical Practice

Experimental results obtained in different laboratories world-wide by researchers using surface-enhanced Raman scattering (SERS) can differ significantly. We, an international team of scientists with long-standing expertise in SERS, address this issue from our perspective by presenting considerations on reliable and quantitative SERS. The central idea of this joint effort is to highlight key parameters and pitfalls that are often encountered in the literature. To that end, we provide here a series of recommendations on: a) the characterization of solid and colloidal SERS substrates by correlative electron and optical microscopy and spectroscopy, b) on the determination of the SERS enhancement factor (EF), including suitable Raman reporter/probe molecules, and finally on c) good analytical practice. We hope that both newcomers and specialists will benefit from these recommendations to increase the inter-laboratory comparability of experimental SERS results and further establish SERS as an analytical tool.

Present and Future of Surface-Enhanced Raman Scattering

The discovery of the enhancement of Raman scattering by molecules adsorbed on nanostructured metal surfaces is a landmark in the history of spectroscopic and analytical techniques. Significant experimental and theoretical effort has been directed toward understanding the surface-enhanced Raman scattering (SERS) effect and demonstrating its potential in various types of ultrasensitive sensing applications in a wide variety of fields. In the 45 years since its discovery, SERS has blossomed into a rich area of research and technology, but additional efforts are still needed before it can be routinely used analytically and in commercial products. In this Review, prominent authors from around the world joined together to summarize the state of the art in understanding and using SERS and to predict what can be expected in the near future in terms of research, applications, and technological development. This Review is dedicated to SERS pioneer and our coauthor, the late Prof. Richard Van Duyne, whom we lost during the preparation of this article.

Fast and reproducible iSERS microscopy of single HER2-positive breast cancer cells using gold nanostars as SERS nanotags

Speed is often a bottleneck in conventional Raman microscopy on biological specimens. In immuno-Raman microspectroscopy, or for short iSERS microscopy, the acquisition times per pixel have been reduced by more than one order of magnitude over the past decade since its proof of concept. Typically rather high laser power densities are employed with the intention of compensating for the shorter acquisition times, without checking the reproducibility of the results in repeated experiments on the same sample. Here, we systematically analyze this aspect at the single-cell level since it forms the basis of quantification and is very important for reinspection of the same specimen. Specifically, we investigate experimentally the role of the laser power density in conjunction with the acquisition times per pixel in a series of repeated iSERS experiments on the same single cell overexpressing the breast cancer tumor marker human epidermal growth factor receptor 2 (HER2). Confocal iSERS mapping experiments were guided by wide-field fluorescence microscopy for selecting the regions of interest. We demonstrate that the combination of ca. a 1-2 mW laser power (40× objective, NA 0.6), 50 ms acquisition time per pixel and a high EM-CCD signal gain yields highly reproducible iSERS images in a series of four repeated experiments on the same single cell. In contrast, longer acquisition times (0.8 s, no EM gain) and in particular higher laser power (4 mW up to 18 mW) densities lead to non-reproducible iSERS results due to signal degradation.

Spectral Screening of the Energy of Hot Holes over a Particle Plasmon Resonance

Plasmonic hot carriers have been recently identified as key elements for photocatalysis at visible wavelengths. The possibility to transfer energy between metal plasmonic nanoparticles and nearby molecules depends not only on carrier generation and collection efficiencies but also on their energy at the metal-molecule interface. Here an energy screening study was performed by monitoring the aniline electro-polymerization reaction via an illuminated 80 nm gold nanoparticle. Our results show that plasmon excitation reduces the energy required to start the polymerization reaction as much as 0.24 eV. Three possible photocatalytic mechanisms were explored: the enhanced near field of the illuminated particle, the temperature increase at the metal-liquid interface, and the excited electron-hole pairs. This last phenomenon is found to be the one contributing most prominently to the observed energy reduction.

ImmunoSERS microscopy for the detection of smooth muscle cells in atherosclerotic plaques

We investigated the suitability of immuno-SERS (iSERS) microscopy for imaging of smooth muscle cells (SMCs) in atherosclerotic plaques. Localization of SMCs is achieved by using SERS-labelled antibodies direct against alpha-smooth muscle actin (SMA). The staining quality of the false-colour iSERS images obtained by confocal Raman microscopy with point mapping is compared with wide-field immunofluorescence images. Both direct (labelled primary antibody) and indirect iSERS staining (unlabelled primary and labelled secondary antibody) techniques were employed. Direct iSERS staining yields results comparable to indirect IF staining, demonstrating the suitability of iSERS in research on atherosclerosis and paving the way for future multiplexed imaging experiments.

Rapid, Quantitative, and Ultrasensitive Point-of-Care Testing: A Portable SERS Reader for Lateral Flow Assays in Clinical Chemistry

The design of a portable Raman/SERS-LFA reader with line illumination using a custom-made fiber optic probe for rapid, quantitative, and ultrasensitive point-of-care testing (POCT) is presented. The pregnancy hormone human chorionic gonadotropin (hCG) is detectable in clinical samples within only 2-5 s down to approximately 1.6 mIU mL-1 . This acquisition time is several orders of magnitude shorter than those of existing approaches requiring expensive Raman instrumentation, and the method is 15-times more sensitive than a commercially available lateral flow assay (LFA) as the gold standard. The SERS-LFA technology paves the way for affordable, quantitative, and ultrasensitive POCT with multiplexing potential in real-world applications, ranging from clinical chemistry to food and environmental analysis as well as drug and biowarfare agent testing.

Probing the SERS brightness of individual Au nanoparticles, hollow Au/Ag nanoshells, Au nanostars and Au core/Au satellite particles: single-particle experiments and computer simulations

Different classes of plasmonic nanoparticles functionalized with the non-resonant Raman reporter molecule 4-MBA are tested for their SERS signal brightness at the single-particle level: gold nanoparticles, hollow gold/silver nanoshells, gold nanostars, and gold core/gold satellite particles. Correlative SERS/SEM experiments on a set of particles from each class enable the unambiguous identification of single particles by electron microscopy as well as the characterization of both their elastic (LSPR) and inelastic (SERS) scattering spectra. Experimental observations are compared with predictions from FEM computer simulations based on 3D models derived from representative TEM/SEM images. Single gold nanostars and single gold core/gold satellite particles exhibit a detectable SERS signal under the given experimental conditions, while single gold nanoparticles and single hollow gold/silver nanoshells are not detectable.

Evaluation of 3D gold nanodendrite layers obtained by templated galvanic displacement reactions for SERS sensing and heterogeneous catalysis

Dense layers of overlapping three-dimensional (3D) gold nanodendrites characterized by high specific surfaces as well as by abundance of sharp edges and vertices creating high densities of SERS hotspots are promising substrates for SERS-based sensing and catalysis. We have evaluated to what extent structural features of 3D gold nanodendrite layers can be optimized by the initiation of 3D gold nanodendrite growth at gold particles rationally positioned on silicon wafers. For this purpose, galvanic displacement reactions yielding 3D gold nanodendrites were guided by hexagonal arrays of parent gold particles with a lattice constant of 1.5 μm obtained by solid-state dewetting of gold on topographically patterned silicon wafers. Initiation of the growth of dendritic features at the edges of the gold particles resulted in the formation of 3D gold nanodendrites while limitation of dendritic growth to the substrate plane was prevented. The regular arrangement of the parent gold particles supported the formation of dense layers of overlapping 3D gold nanodendrites that were sufficiently homogeneous within the resolution limits of Raman microscopy. Consequently, SERS mapping experiments revealed a reasonable degree of uniformity. The proposed preparation algorithm comprises only bottom-up process steps that can be carried out without the use of costly instrumentation.

iSERS microscopy guided by wide field immunofluorescence: analysis of HER2 expression on normal and breast cancer FFPE tissue sections

Surface-enhanced Raman scattering (SERS) microscopy is an emerging imaging technique for tissue-based cancer diagnostics. Specifically, immuno-SERS (iSERS) microscopy employs antibodies labelled by molecularly functionalized noble metal colloids for antigen localization on tissue specimen. Spectrally resolved iSERS acquisition schemes are typically rather time-consuming when large tissue areas must be scanned. Here, we demonstrate the application of iSERS imaging guided by wide field immunofluorescence (IF) for localization of the human epidermal growth factor receptor 2 (HER2) on breast tissue sections. The addition of unlabelled anti-HER2 primary antibodies to the tissue is followed by the incubation with secondary antibodies labelled with both Alexa-647 (for IF) and hydrophilically stabilized gold nanostars coated with aromatic thiols (for iSERS). False-color iSERS images clearly reveal the different HER2 expression levels on normal and breast cancer tissue, respectively. A series of negative controls confirms that the binding specificity of the secondary antibody is maintained after conjugation to the SERS nanoparticles.

Quantitative Determination of Contribution by Enhanced Local Electric Field, Antenna-Amplified Light Scattering, and Surface Energy Transfer to the Performance of Plasmonic Organic Solar Cells

Plasmonic metal nanostructures are widely used as subwavelength light concentrators to enhance light harvesting of organic solar cells through two photophysical effects, including enhanced local electric field (ELEF) and antenna-amplified light scattering (AALS), while their adverse quenching effect from surface energy transfer (SET) should be suppressed. In this work, a comprehensive study to unambiguously distinguish and quantitatively determine the specific influence and contribution of each effect on the overall performance of organic solar cells incorporated with Ag@SiO₂ core-shell nanoparticles (NPs) is presented. By investigating the photon conversion efficiency (PCE) as a function of the SiO₂ shell thickness, a strong competition between the ELEF and SET effects in the performance of the devices with the NPs embedded in the active layers is found, leading to a maximum PCE enhancement of 12.4% at the shell thickness of 5 nm. The results give new insights into the fundamental understanding of the photophysical mechanisms responsible for the performance enhancement of plasmonic organic solar cells and provide important guidelines for designing more-efficient plasmonic solar cells in general.

Rapid and sensitive SERS detection of the cytokine tumor necrosis factor alpha (tnf-α) in a magnetic bead pull-down assay with purified and highly Raman-active gold nanoparticle clusters

Tumor necrosis factor alpha (TNF-α) is a cytokine with significance in early diagnosis of cardiovascular diseases, obesity and insulin resistance. We demonstrate the proof of concept for a rapid and sensitive detection of TNF-α using a magnetic bead pull-down assay in combination with surface-enhanced Raman scattering (SERS). The use of purified and highly SERS-active small clusters of gold nanoparticles (AuNP) provides the high sensitivity of the assay with a limit of detection of ca. 1 pg/mL. Continuous density gradient centrifugation was employed for separating the very bright silica-encapsulated AuNP dimers and trimers from the significantly weaker AuNP monomers. Negative control experiments with other cytokines (IL-6, IL-8) and bovine serum albumin (BSA) confirm the high specificity of the assay, but indicate also space for future improvements by further reducing non-specific binding between proteins and the SERS nanotags. The multiplexing potential of this SERS-based detection scheme is exemplarily demonstrated by using a set of three spectrally distinct and highly SERS-active AuNP clusters with unique spectral barcodes. Graphical abstract ᅟ.

Surface-enhanced Raman spectroscopic detection of molecular chemo- and plasmo-catalysis on noble metal nanoparticles

The in situ detection of reactions catalyzed by metal NPs is challenging because the underlying chemical transformations occur at interfaces. Surface-enhanced Raman scattering (SERS), a surface-selective, sensitive and label-free vibrational spectroscopic technique, is ideally suited for monitoring of heterogeneous catalysis with high chemical specificity. A major limitation in the past, however, was that small, catalytically active metal NPs do not exhibit the high plasmonic activity required for SERS. This feature article focuses on the design, synthesis and use of bifunctional NPs with both catalytic and plasmonic activity for in situ SERS detection of reactions catalyzed by metal NPs. We focus on model reactions induced by chemical reducing agents such as hydride or molecular hydrogen as well as on plasmon-induced photo-catalysis including both photo-oxidation and photo-reduction. Finally, we highlight the concept of photo-recycling on halide-containing silver surfaces for unprecedented multi-electron reduction chemistry.

Molecular recognition of carboxylates in the protein leucine zipper by a multivalent supramolecular ligand: residue-specific, sensitive and label-free probing by UV resonance Raman spectroscopy

Proof of concept study for using UVRR spectroscopy to monitor the selective binding of an artificial ligand to carboxylate residues of a protein.

Ideal Dimers of Gold Nanospheres for Precision Plasmonics: Synthesis and Characterization at the Single-Particle Level for Identification of Higher Order Modes

Ideal dimers comprising gold nanoparticles with a smooth surface and high sphericity are synthesized by a substrate-based assembly strategy with efficient cetyltrimethylammonium bromide removal. An unprecedented structural and plasmonic uniformity at the single-particle level is observed since inhomogeneities resulting from variations in gap morphology are eliminated. Single ideal dimers are analyzed by polarization-resolved dark-field scattering spectroscopy. Contributions from transverse as well as quadrupolar and octupolar longitudinal plasmon coupling modes can be discriminated because of their orthogonal polarization behavior. The assignment of these higher order coupling modes is supported by computer simulations.

Simultaneous Rayleigh/Mie and Raman/Fluorescence Characterization of Molecularly Functionalized Colloids by Correlative Single-Particle Real-Time Imaging in Suspension

Many applications of nano- and microparticles require molecular functionalization. Assessing the heterogeneity of a colloidal sample in terms of its molecular functionalization is highly desirable but not accessible by conventional ensemble experiments. Retrieving this information necessitates single-particle experiments which simultaneously detect both functionalized and nonfunctionalized particles via two separate imaging channels. In this contribution, we present an optical setup for performing correlative single-particle imaging using laser light-sheet illumination: the first detection channel records elastic light scattering (Rayleigh/Mie), while the second channel detects inelastic light scattering (Raman) or fluorescence. The instrument is tested with Raman reporter-functionalized SERS-active metal nanoparticles (core/satellite silver nanoparticles, dimers and monomers of gold nanoparticles) and fluorophore-functionalized colloids (fluorescent polymer microparticles, dye-labeled protein on gold nanoparticles).