Industrial Kraft Lignin Based Binary Cathode Interface Layer Enables Enhanced Stability in High Efficiency Organic Solar Cells

Herein, a binary cathode interface layer (CIL) strategy based on the industrial solvent fractionated LignoBoost kraft lignin (KL) is adopted for fabrication of organic solar cells (OSCs). The uniformly distributed phenol moieties in KL enable it to easily form hydrogen bonds with commonly used CIL materials, i.e., bathocuproine (BCP) and PFN-Br, resulting in binary CILs with tunable work function (WF). This work shows that the binary CILs work well in OSCs with large KL ratio compatibility, exhibiting equivalent or even higher efficiency to the traditional CILs in state of art OSCs. In addition, the combination of KL and BCP significantly enhanced OSC stability, owing to KL blocking the reaction between BCP and nonfullerene acceptors (NFAs). This work provides a simple and effective way to achieve high-efficient OSCs with better stability and sustainability by using wood-based materials.

Cross-Linking of Doped Organic Semiconductor Interlayers for Organic Solar Cells: Potential and Challenges

Solution-processable interlayers are important building blocks for the commercialization of organic electronic devices such as organic solar cells. Here, the potential of cross-linking to provide an insoluble, stable, and versatile charge transport layer based on soluble organic semiconductors is studied. For this purpose, a photoreactive tris-azide cross-linker is synthesized. The capability of the small molecular cross-linker is illustrated by applying it to a p-doped polymer used as a hole transport layer in organic solar cells. High cross-linking efficiency and excellent charge extraction properties of the cross-linked doped hole transport layer are demonstrated. However, at high doping levels in the interlayer, the solar cell efficiency is found to deteriorate. Based on charge extraction measurements and numerical device simulations, it is shown that this is due to diffusion of dopants into the active layer of the solar cell. Thus, in the development of future cross-linker materials, care must be taken to ensure that they immobilize not only the host but also the dopants.

Slow Relaxation of Photogenerated Charge Carriers Boosts Open-Circuit Voltage of Organic Solar Cells

Among the parameters determining the efficiency of an organic solar cell, the open-circuit voltage (V_OC) is the one with most room for improvement. Existing models for the description of V_OC assume that photogenerated charge carriers are thermalized. Here, we demonstrate that quasi-equilibrium concepts cannot fully describe V_OC of disordered organic devices. For two representative donor:acceptor blends, it is shown that V_OC is actually 0.1-0.2 V higher than it would be if the system was in thermodynamic equilibrium. Extensive numerical modeling reveals that the excess energy is mainly due to incomplete relaxation in the disorder-broadened density of states. These findings indicate that organic solar cells work as nonequilibrium devices, in which part of the photon excess energy is harvested in the form of an enhanced V_OC.

Charge carrier loss mechanisms in CuInS2/ZnO nanocrystal solar cells

Heterojunction solar cells based on colloidal nanocrystals (NCs) have shown remarkable improvements in performance in the last decade, but this progress is limited to merely two materials, PbS and PbSe. However, solar cells based on other material systems such as copper-based compounds show lower power conversion efficiencies and much less effort has been made to develop a better understanding of factors limiting their performance. Here, we study charge carrier loss mechanisms in solution-processed CuInS2/ZnO NC solar cells by combining steady-state measurements with transient photocurrent and photovoltage measurements. We demonstrate the presence of an extraction barrier at the CuInS2/ZnO interface, which can be reduced upon illumination with UV light. However, trap-assisted recombination in the CuInS2 layer is shown to be the dominant decay process in these devices.

Semitransparent polymer-based solar cells with aluminum-doped zinc oxide electrodes

With the use of two transparent electrodes, organic polymer-fullerene solar cells are semitransparent and may be combined to parallel-connected multijunction devices or used for innovative applications like power-generating windows. A challenging issue is the optimization of the electrodes, to combine high transparency with adequate electric properties. In the present work, we study the potential of sputter-deposited aluminum-doped zinc oxide as an alternative to the widely used but relatively expensive indium tin oxide (ITO) as cathode material in semitransparent polymer-fullerene solar cells. Concerning the anode, we utilized an insulator-metal-insulator structure based on ultrathin Au films embedded between two evaporated MoO3 layers, with the outer MoO3 film (capping layer) serving as a light coupling layer. The performance of the ITO-free semitransparent polymer-fullerene solar cells was systematically studied as dependent on the thickness of the capping layer and the active layer as well as the illumination direction. These variations were found to have strong impact on the obtained photocurrent densities. We performed optical simulations of the electric field distribution within the devices using the transfer-matrix method, to analyze the origin of the current density variations in detail and provide deep insight into the device physics. With the conventional absorber materials studied here, optimized ITO-free and semitransparent devices reached 2.0% power conversion efficiency and a maximum optical transmission of 60%, with the device concept being potentially transferable to other absorber materials.

Structure-property relationship of anilino-squaraines in organic solar cells

Soluble molecular semiconductors are a promising alternative to semiconducting polymers in the field of organic photovoltaics. Here, three custom-made symmetric 1,3-bis(N,N-alkylated-2,6-dihydroxy-anilino)squaraines containing systematic variations in their molecular structures are compared regarding their applicability as donor materials in bulk-heterojunction solar cells. The terminal substitution pattern of the squaraines is varied from cyclic over linear to branched including a stereogenic center. Single crystal structures are determined, and, in the case of chiral squaraine, unusual formation of stereoisomer co-crystals is revealed. The thin film absorbance spectra show characteristic signatures of H- and J-bands or hint at the formation of tautomers. The general feasibility of these model compounds for photovoltaic applications is studied by light-induced electron spin resonance spectroscopy. The impact of the different molecular substitution patterns on aggregation behavior and, consequently, their optoelectronic solid state properties including charge carrier mobility and finally the solar cell performance are investigated.

Treatment of testicular intraepithelial neoplasia (intratubular germ cell neoplasia unspecified) with local radiotherapy or with platinum-based chemotherapy: a survey of the German Testicular Cancer Study Group

BACKGROUND

The treatment of testicular intraepithelial neoplasia (TIN), the progenitor of testicular germ cell tumours (GCTs), is based on little data.

PATIENTS AND METHODS

Two hundred and twenty-eight GCT patients with contralateral TIN were retrospectively enrolled. Ten had surveillance, 122 radiotherapy to testis with 18-20 Gy, 30 cisplatin-based chemotherapy (two cycles), 51 chemotherapy (three cycles), and 15 carboplatin. The study end point was a malignant event (ME), defined as detection of TIN upon control biopsy or occurrence of a second GCT. The Secondary end point was hypogonadism during follow-up.

RESULTS

Numbers, proportions of ME, and median event-free survival (EFS) times were: radiotherapy N = 3, 2.5%, 11.08 years; chemotherapy (two cycles) N = 15, 50%, 3.0 years; chemotherapy (three cycles) N = 12, 23.5%, 9.83 years; carboplatin N = 10, 66%, 0.9 years; surveillance N = 5, 50%, 7.08 years. EFS is significantly different among the groups. Hypogonadism rates were in radiotherapy patients 30.8%, chemotherapy (two cycles) 13%, chemotherapy (three cycles) 17.8%, carboplatin 40%, surveillance 40%.

CONCLUSIONS

Local radiotherapy is highly efficacious in curing TIN. Chemotherapy is significantly less effective and the cure rates are dose-dependent. Though hypogonadism occurs in one-third of patients, radiotherapy with 20 Gy remains the standard management of TIN.

A putative helical domain in the MalK subunit of the ATP-binding-cassette transport system for maltose of Salmonella typhimurium (MalFGK2) is crucial for interaction with MalF and MalG. A study using the LacK protein of Agrobacterium radiobacter as a tool

The ATP-binding-cassette (ABC) protein LacK of Agrobacterium radiobacter displays high sequence similarity to the MalK subunit of the Salmonella typhimurium maltose-transport system (MalFGK2). We have used LacK as a tool to identify sites of interaction of MalK with the membrane-integral components MalF and MalG. Small amounts of LacK, resulting from the expression of the plasmid-borne lacK gene, proved to be sufficient for partial restoration of growth of a malK strain of S. typhimurium on maltose. LacK failed to substitute for MalK in regulating the expression of maltose-inducible genes but the hybrid complex MalFGLacK2 was sensitive to inducer exclusion. The lacK gene also complemented a ugpC mutant of Escherichia coli to growth on sn-glycerol-3-phosphate as the phosphate source. Partially purified LacK exhibited a spontaneous ATPase activity comparable to that of MalK. A MalK"-'LacK chimeric protein was isolated (by in vivo recombination) in which the N-terminal 140 amino acids of MalK are fused to residues 141-363 of LacK. The protein substituted for MalK in maltose transport considerably better than LacK. Furthermore, random mutagenesis of the plasmid-borne lacK gene yielded three clones that were superior to wild-type lacK in complementing a malK mutation. Single mutations (V114M or L123F) substantially improved the growth of a malK strain on maltose, whereas a double mutation (L123F, S295N) resulted in growth and transport rates that were indistinguishable from those obtained with MalK. In contrast, the introduction of the single change S295N into LacK had no effect but combination with the V114M mutation led to a further twofold increase in transport activity. These results indicate that a putative helical domain in MalK, encompassing residues 89-140, is crucial for a functional, high-affinity interaction with MalF and MalG.

Nucleotide-induced conformational changes of MalK, a bacterial ATP binding cassette transporter protein

Nucleotide-induced structural rearrangements of MalK, the ATP-hydrolyzing component of the ATP binding cassette transporter for maltose from Salmonella typhimurium were investigated by means of analysis of intrinsic tryptophan fluorescence and limited proteolysis. ATP was found to decrease the tryptophan fluorescence of purified MalK by 37 +/- 1%. ADP or adenosine 5'-O-(3-(thio)triphosphate) (ATP gamma S) caused similar quenching while AMP was rather ineffective. Mg2+ ions were not required. Exposure of MalK to increasing concentrations of trypsin and subsequent analysis by SDS-polyacrylamide gel electrophoresis and immunoblotting revealed the formation of three major transiently stable peptide fragments of 24 (T2), 23 (T3), and 20 kDa (T4), respectively. In addition, a minor rapidly degraded fragment of 33 kDa (T1) was observed. However, in the presence of MgATP, fragment T1 as well as a substantial fraction of native MalK were strongly protected against proteolytic attack. Similar protection against the protease was observed in the presence of MgGTP or, to a lesser extent, MgCTP. In contrast, MgADP, ATP in the presence of EDTA, CaATP or nonhydrolyzable nucleotides such as MgATP gamma S or MgAMP-PNP (beta, gamma-imidoadenosine-5'-triphosphate) failed to significantly affect the susceptibility of MalK to the protease. MgATP similarly affected the tryptic digestion pattern of a mutant protein (MalKK42R) that exhibits only a much reduced ATPase activity but has retained the capability to bind nucleotides. N-terminal protein sequence analysis of the peptides revealed cleavage by trypsin at Arg66 (T1), Arg146 (T2), Arg153 (T3), and Arg185 (T4), respectively. These results indicate that (i) nucleotide binding to MalK is accompanied by a global conformational change of the protein; (ii) a very specific interaction occurs with substrates of the MalK-ATPase, resulting in structural changes that involve the helical domain from Arg66 to Arg146; and (iii) the C-terminal half of MalK is rather resistant to proteolysis.

Characterization of site-directed mutations in conserved domains of MalK, a bacterial member of the ATP-binding cassette (ABC) family [corrected]

Site-directed mutagenesis was used to change four amino acid residues (Q82, P152, L179, H192) in the MalK subunit of S. typhimurium maltose transport system which are highly conserved among members of the ATP-binding cassette (ABC) family. Replacement of H192 caused complete failure to complement the transport defect of a malK strain whereas changes of the other residues resulted in reduced or wild-type activity. The purified mutant proteins exhibited ATPase activity comparable to wild-type MalK.