Unveiling the Role of DMAP for the Se-Catalyzed Oxidative Carbonylation of Alcohols: A Mechanism Study

Considering the remarkable catalytic activity (160 times higher) of Se/DMAP for the oxidative carbonylation of alcohols, unveiling the role of DMAP in catalysis is highly required. We investigated DFT calculations, and the proposed intermediates were verified with in situ ATR-FTIR analysis. DFT showed that the formation of [DMAP···HSe]δ-[DMAP(CO)OR]δ+ (IV) via nucleophilic substitution of DMAP at the carbonyl group of DMAP···HSe(CO)OR is the most energetically favorable. DMAP acts as both a nucleophile and a hydrogen bond acceptor, which is responsible for its remarkable activity.

Development and Assessment of a Multi-Purpose Knowledge-Based Planning Model (RapidPlan) for Prostate Radiation

PURPOSE/OBJECTIVE(S)

RapidPlan (RP) is a knowledge-based planning (KBP) tool to improve plan quality, planning speed, and reduce inter-patient plan variability. For small to medium institutions, it is difficult to find sufficient patient numbers to configure a reliable KBP-RP model. This study aimed to build a multi-purpose KBP-RP model for prostate cancers.

MATERIALS/METHODS

A total of 124 prostate plans from 2018-2022 at our institution were selected to configure the initial RP model. After model training, outliers were removed. 77 patients were used for the final RP model. Three fine-tuned RP sub-models with different optimized constraints corresponding to prostate bed, prostate + seminal vesicles (SV), and prostate boost plans were generated. RP models were validated by comparing plan quality with the original manually optimized plans (MP). 54 independent plans were selected to validate the RP models. Validation included: dose to 99% and 2% of PTV (D99%, D2%), PTV conformity index (CI); for organs at risk (OARs), volume receiving >70Gy and >60Gy (V70Gy, V60Gy) to bladder and rectum, maximum dose (Dmax) to femur heads (FHs) and small bowel. Statistical t-test analysis was performed with a significance of p<0.05.

RESULTS

A total of 48/54 model-based plans were clinically approved after single RP optimization. 6/54 failed plans were prostate bed plans and were deemed acceptable after additional minor constraint adjustments. For PTV, D99%, D2%, and CI were comparable (p>0.05) to MP. Bladder and rectum V70Gy were comparable (p>0.05), and V60Gy were significantly lower to MP (p<0.05), with an average Dmean of 23.21±14.58Gy and 16.41±10.63Gy vs 26.36±16.89Gy and 18.24±12.81Gy for RP and MP. RP significantly reduced Dmax to FHs and small bowel (p<0.05), with average Dmax of 34.95±6.06Gy and 35.62±18.99Gy vs 36.81±7.05Gy and 38.14±17.81Gy, respectively.

CONCLUSION

Multi-purpose prostate RP model was configured and approved plans were generated after single optimization. Prostate RP plans had equivalent PTV coverage with better or comparable OAR constraints.

Low-Crystalline AuCuIn Catalyst for Gaseous CO2 Electrolyzer

Despite its importance for the establishment of a carbon-neutral society, the electrochemical reduction of CO₂  to value-added products has not been commercialized yet because of its sluggish kinetics and low selectivity. The present work reports the fabrication of a low-crystalline trimetallic (AuCuIn) CO₂  electroreduction catalyst and demonstrates its high performance in a gaseous CO₂  electrolyzer. The high Faradaic efficiency (FE) of CO formation observed at a low overpotential in a half-cell test is ascribed to the controlled crystallinity and composition of this catalyst as well as to its faster charge transfer, downshifted d-band center, and low oxophilicity. The gaseous CO₂  electrolyzer with the optimal catalyst as the cathode exhibits superior cell performance with a high CO FE and production rate, outperforming state-of-the-art analogs. Thus, the obtained results pave the way to the commercialization of CO₂  electrolyzers and promote the establishment of a greener society.

Selective CO2 adsorption and bathochromic shift in a phosphocholine-based lipid and conjugated polymer assembly

We assemble a film of a phosphocholine-based lipid and a crystalline conjugated polymer using hydrophobic interactions between the alkyl tails of the lipid and alkyl side chains of the polymer, and demonstrated its selective gas adsorption properties and the polymer's improved light absorption properties. We show that a strong attractive interaction between the polar lipid heads and CO₂ was responsible for 6 times more CO₂ being adsorbed onto the assembly than N₂, and that with repeated CO₂ adsorption and vacuuming procedures, the assembly structures of the lipid-polymer assembly were irreversibly changed, as demonstrated by in situ grazing-incidence X-ray diffraction during the gas adsorption and desorption. Despite the disruption of the lipid structure caused by adsorbed polar gas molecules on polar head groups, gas adsorption could promote orderly alkyl chain packing by inducing compressive strain, resulting in enhanced electron delocalization of conjugated backbones and bathochromic light absorption. The findings suggest that merging the structures of the crystalline functional polymer and lipid bilayer is a viable option for solar energy-converting systems that use conjugated polymers as a light harvester and the polar heads as CO₂-capturing sites.

Assembly films of a phosphocholine-based lipid and a crystalline conjugated polymer had significant CO₂ selective adsorption and light absorption due to the attractive interaction of CO₂ with exposed polar lipid heads and enhanced morphologies.

Elaborate Control of Inkjet Printer for Fabrication of Chip-based Supercapacitors

There are tremendous efforts in various fields to apply the inkjet printing method for the fabrication of wearable devices, displays, and energy storage devices. To get high-quality products, however, sophisticated operation skills are required depending on the physical properties of the ink materials. In this regard, optimizing the inkjet printing parameters is as important as developing the physical properties of the ink materials. In this study, optimization of the inkjet printing software parameters is presented for fabricating a supercapacitor. Supercapacitors are attractive energy storage systems because of their high power density, long lifespan, and various applications as power sources. Supercapacitors can be used in the Internet of Things (IoT), smartphones, wearable devices, electrical vehicles (EVs), large energy storage systems, etc. The wide range of applications demands a new method that can fabricate devices in various scales. The inkjet printing method can break through the conventional fixed-size fabrication method.

Measurement of axial phase difference of density fluctuations owing to spontaneously excited waves by using microwave reflectometer on GAMMA 10/PDX

In the GAMMA 10/PDX tandem mirror, plasma with strong ion-temperature anisotropy is produced by using the ion cyclotron range of frequency waves. This anisotropy of ion temperature causes several Alfvén-Ion-Cyclotron (AIC) waves to spontaneously excite in the frequency range just below the ion cyclotron frequency. In addition, difference-frequency (DF) waves are excited in the radial inner region of the plasma by wave-wave coupling among the AIC waves. The radial density profiles were measured at multi-axial positions using a frequency-modulation reflectometer with an axial array of microwave antennas, and an axial variation of the density was found to be significant. In addition, a relative phase difference of the DF wave between axially separated two points was first obtained by finely choosing the probing frequency of the reflectometers with a maximum coherence used as a measure, indicating that the DF wave is a propagating wave, while the pump AIC waves are standing waves in the axial region of measurement.

Methodologies for Fabricating Flexible Supercapacitors

The spread of wearable and flexible electronics devices has been accelerating in recent years for a wide range of applications. Development of an appropriate flexible power source to operate these flexible devices is a key challenge. Supercapacitors are attractive for powering portable lightweight consumer devices due to their long cycle stability, fast charge-discharge cycle, outstanding power density, wide operating temperatures and safety. Much effort has been devoted to ensure high mechanical and electrochemical stability upon bending, folding or stretching and to develop flexible electrodes, substrates and overall geometrically-flexible structures. Supercapacitors have attracted considerable attention and shown many applications on various scales. In this review, we focus on flexible structural design under six categories: paper-like, textile-like, wire-like, origami, biomimetics based design and micro-supercapacitors. Finally, we present our perspective of flexible supercapacitors and emphasize current technical difficulties to stimulate further research.

Incidence of subsequent osteoporotic fractures after distal radius fractures and mortality of the subsequent distal radius fractures: a retrospective analysis of claims data of the Korea National Health Insurance Service

A better understanding of the features of subsequent fractures after distal radius fracture (DRF) is important for the prevention of further osteoporotic fractures. This study found that the cumulative incidence of subsequent osteoporotic fractures in South Korea increased over time and that the mortality rates of subsequent DRFs were lower than those of first-time DRFs.

INTRODUCTION

We examined the incidence of osteoporotic fractures following distal radius fractures (DRFs) and the mortality rate after subsequent DRFs using claims data from the Korea National Health Insurance (KNHI) Service.

METHODS

We identified records for 41,417 patients with first-time DRFs in 2012. The occurrence of osteoporotic fractures of the spine, hip, wrist, and humerus at least 6 months after the index DRF was tracked through 2016. All fractures were identified by specific diagnosis and procedure codes. One-year mortality rates and standardized mortality ratios (SMRs) for initial and subsequent DRFs were calculated for all patients.

RESULTS

The 4-year cumulative incidence of all subsequent osteoporotic fractures was 14.74% (6105/41,417; 9.47% in men, 15.9% in women). The number of associated subsequent fractures was 2850 for the spine (46.68%), 2271 for the wrist (37.2%), 708 for the hip (11.6%), and 276 for the humerus (4.52%). The cumulative mortality rate 1 year after the first-time and subsequent DRF was 1.47% and 0.71%, respectively, and the overall SMR was 1.48 (95% CI: 1.37-1.61) and 0.71 (95% CI: 0.42-1.21), respectively.

CONCLUSION

The cumulative incidence of osteoporotic fractures following DRFs increased over the study period and was higher among women. The cumulative mortality rates and SMRs of subsequent DRFs were lower than those of first-time DRFs at the 1-year follow-up. Given the increasing incidence rate of DRFs, the incidence of subsequent osteoporotic fractures may also increase.

Cardiometabolic risk prediction algorithms for young people with psychosis: a systematic review and exploratory analysis

OBJECTIVE

Cardiometabolic risk prediction algorithms are common in clinical practice. Young people with psychosis are at high risk for developing cardiometabolic disorders. We aimed to examine whether existing cardiometabolic risk prediction algorithms are suitable for young people with psychosis.

METHODS

We conducted a systematic review and narrative synthesis of studies reporting the development and validation of cardiometabolic risk prediction algorithms for general or psychiatric populations. Furthermore, we used data from 505 participants with or at risk of psychosis at age 18 years in the ALSPAC birth cohort, to explore the performance of three algorithms (QDiabetes, QRISK3 and PRIMROSE) highlighted as potentially suitable. We repeated analyses after artificially increasing participant age to the mean age of the original algorithm studies to examine the impact of age on predictive performance.

RESULTS

We screened 7820 results, including 110 studies. All algorithms were developed in relatively older participants, and most were at high risk of bias. Three studies (QDiabetes, QRISK3 and PRIMROSE) featured psychiatric predictors. Age was more strongly weighted than other risk factors in each algorithm. In our exploratory analysis, calibration plots for all three algorithms implied a consistent systematic underprediction of cardiometabolic risk in the younger sample. After increasing participant age, calibration plots were markedly improved.

CONCLUSION

Existing cardiometabolic risk prediction algorithms cannot be recommended for young people with or at risk of psychosis. Existing algorithms may underpredict risk in young people, even in the face of other high-risk features. Recalibration of existing algorithms or a new tailored algorithm for the population is required.

CAPABILITIES OF THE ARADOS-WG03 REGIONAL NETWORK FOR LARGE-SCALE RADIOLOGICAL AND NUCLEAR EMERGENCY SITUATIONS IN ASIA

In 2015, the Asian Radiation Dosimetry Group established a regional network of biological dosimetry laboratories known as the ARADOS-WG03 (Working Group 03; Biological Dosimetry). A survey was conducted in 2017 to evaluate the capabilities and capacities of the participating laboratories for emergency preparedness and responses in large-scale nuclear and/or radiological incidents. The results of this survey were identified and assessed. The data provide important information on the current state of emergency cytogenetic biological dosimetry capabilities in the Asian region.

Social capital and students’ health: results of the splash study

Background

Universities around the world are challenged with rising rates of mental health problems among their students. Cumulative evidence demonstrated that aspects of the social environment, including social capital, play an important role in mental health. This study aimed to determine the prevalence of depressive symptoms among university students from across the globe and to investigate whether social capital was associated with depressive symptoms in university students.

Methods

A cross-sectional study was conducted in Albania, Brazil, Germany, Italy, Malaysia Oman, South Korea, Switzerland, Taiwan and the USA in 2018/2019. Data were obtained through self-administered questionnaire, including questions on sociodemographic characteristics and depressive symptoms. The BDI-S was used to assess the presence of depressive symptoms. Multilevel analyses were conducted to assess the relationship between social capital and depressive, adjusting for individual covariates (e.g. perceived stress and health behaviours) and country-level characteristics (e.g. democracy type).

Results

A total 3894 students participated. Out of all participants almost 47% presented clinically relevant depressive symptoms. The prevalence of depressive symptoms was highest among students identifying as other than male or female (48.7%), among students with low socioeconomic status (59.5%) and among students with low levels of cognitive (65.3%) and behavioural social capital (57.0%). Even after adjustment in multilevel logistic regression analyses, depressive symptoms remained significantly associated with low levels of cognitive social capital (OR = 1.49, 95% CI: 1.06 to 2.10) and low level of behavioural social capital (OR = 1.36, 95% CI: 1.08 to 1.71).

Conclusions

Social capital may play an important role in mental health problems in the university setting. The study identified significant opportunities for future research and health promotion strategies among students.

Key messages

Key factors associated with depressive symptoms among university students were low levels of behavioural and cognitive social capital. Health promotion programs targeting young persons with depressive symptoms should include effective components of social epidemiology such as social capital.

Impacts of climate change on snow accumulation and melting processes over mountainous regions in Northern California during the 21st century

A point-location-based analysis of future climate change impacts on snow accumulation and melting processes was conducted over three study watersheds in Northern California during a 90-year future period by means of snow regime projections. The snow regime projections were obtained by means of a physically-based snow model with dynamically downscaled future climate projections. Then, atmospheric and snow-related variables, and their interrelations during the 21st century were investigated to reveal future climate change impacts on snow accumulation and melting processes. The analysis shows large reductions in snow water equivalent (SWE), snowfall to precipitation (S/P) ratio, and snowmelt through the 21st century. Timing of the peak of the SWE and snowmelt will also change in the future. Meanwhile, the analysis in this study shows that air temperature rise will affect, but will not dominate the future change in snowmelt over the study watersheds. This result implies the importance of considering atmospheric variables other than air temperature, such as precipitation, shortwave radiation, relative humidity, and wind speed even if these variables will not clearly change during the 21st century.

BIODOSIMETRY AND BIODOSIMETRY NETWORKS FOR MANAGING RADIATION EMERGENCY

Biological dosimetry enables individual dose reconstruction in the case of unclear or inconsistent radiation exposure situations, especially when a direct measurement of ionizing radiation is not or is no longer possible. To be prepared for large-scale radiological incidents, networking between well-trained laboratories has been identified as a useful approach for provision of the fast and trustworthy dose assessments needed in such circumstances. To this end, various biodosimetry laboratories worldwide have joined forces and set up regional and/or nationwide networks either on a formal or informal basis. Many of these laboratories are also a part of global networks such as those organized by World Health Organization, International Atomic Energy Agency or Global Health Security Initiative. In the present report, biodosimetry networks from different parts of the world are presented, and the partners, activities and cooperation actions are detailed. Moreover, guidance for situational application of tools used for individual dosimetry is given.

Inpatient burden of esophageal cancer and analysis of factors affecting in-hospital mortality and length of stay

Esophageal cancer (EC) continues to be a major source of morbidity and mortality in the United States. However, there has been a relative dearth of research into hospital utilization in patients with EC. This study examines temporal trends in hospital admissions, length of stay (LOS), mortality, and costs associated with EC. In addition, we also analyzed factors associated with inpatient mortality and LOS. We interrogated National Inpatient Sample (NIS), a large registry of inpatient data, to retrieve information about various demographic and factors associated with hospital stay in patients who were admitted for EC between the years 1998 and 2013 in the United States. After examining trends over time, multivariate analysis was performed to identify factors associated with LOS and mortality. During 1998-2013, 538,776 hospital stays with principal diagnosis of EC were reviewed. Number of hospital stays and inpatient charges increased by 397 per year (±67.8; P < 0.0001) and $3,033 per patient per year (±135; <0.0001) respectively. Mortality and LOS decreased by 0.23% per year (±0.03; P < 0.0001) and 0.07 days per year (±0.006; P < 0.0001) respectively. Multiple factors associated with LOS and mortality were outlined. Despite overall increase in hospital utilization with respect to number of admissions and inpatient charges, inpatient mortality and LOS associated with EC declined. Factors associated with inpatient mortality and LOS may help drive clinical decision-making and influence healthcare or hospital policy.

Safety and efficacy of endoscopic spray cryotherapy for esophageal cancer

Although surgery is traditionally the standard of care for esophageal cancer, esophagectomy carries significant morbidity. Alternative endoscopic therapies are needed for patients who are not candidates for conventional treatment. The objective of this study is to assess the safety, efficacy, and tolerability of spray cryotherapy of esophageal adenocarcinoma. This study includes patients with esophageal adenocarcinoma who had failed or were not candidates for conventional therapy enrolled retrospectively and prospectively in an open-label registry and patients in a retrospective cohort from 11 academic and community practices. Endoscopic spray cryotherapy was performed until biopsy proven local tumor eradication or until treatment was halted due to progression of disease, patient withdrawal or comorbidities. Eighty-eight patients with esophageal adenocarcinoma (median age 76, 80.7% male, mean length 5.1 cm) underwent 359 treatments (mean 4.4 per patient). Tumor stages included 39 with T1a, 25 with T1b, 9 with unspecified T1, and 15 with T2. Eighty-six patients completed treatment with complete response of intraluminal disease in 55.8%, including complete response in 76.3% for T1a, 45.8% for T1b, 66.2% for all T1, and 6.7% for T2. Mean follow-up was 18.4 months. There were no deaths or perforations related to spray cryotherapy. Strictures developed in 12 of 88 patients (13.6%) but were present before spray cryotherapy in 3 of 12. This study suggests that endoscopic spray cryotherapy is a safe, well-tolerated, and effective treatment option for early esophageal adenocarcinoma.