Bees reflect better on their ecosystem health than their products

Beehives constitute a source of environmental contaminants because forager bees explore their habitat and unintentionally accumulate them while foraging for food. Therefore, this review paper investigated different bee species and products from 55 countries to identify how they can help environmental biomonitoring by giving an overview of the past 11 years. Thereby is presented in this study the beehive's use as a bioindicator for metals, analytical techniques, data analysis, environmental compartments, common inorganic contaminants, reference thresholds for some metal concentrations in bees and honey, and other factors over more than 100 references. Most authors agree that the honey bee is a suitable bioindicator to assess toxic metal contamination, and among its products, propolis, pollen, and beeswax are more suited than honey. However, in some situations, when comparing bees with their products, bees are more efficient as potential environmental biomonitors. Some factors such as the colony location, floral sources, regional effects, and activities surrounding the apiary influence the bees, and the composition of their products is reflected by alterations in their chemical profile, making them suitable bioindicators.

Prepubertal to adulthood exposure to low doses of glyphosate-based herbicide increases the expression of the Havcr1 (Kim1) biomarker and causes mild kidney alterations

Glyphosate is a nonselective and postemergent herbicide used to combat weeds in several crops, which raises concerns about risks to human health since residues are detected in urine, human milk, surface water and several types of food. Feces and urine are the major routes of elimination of glyphosate, making the kidney a sensitive target for the development of toxicity. In fact, farmers are at high risk of developing chronic kidney disease. In this sense, this study aims to investigate kidney function by measuring the serum levels of urea and creatinine, examining the histological morphology, and analyzing the mRNA expression of genes related to tubular transport of ions, urea and urates and the biomarker of kidney disease Kim1, and the levels of lead in the kidney in male Wistar rats orally exposed to low levels of glyphosate-based herbicide (GBH: 0, 0.5 or 5 mg/kg) from weaning to adult life by gavage. GBH0.5 showed reduced serum urea concentration, presence of tubulointerstitial swelling and mononuclear cell infiltration into the interstitium, increased gene expression of Kim1 and reduced gene expression of Slc14a1. GBH5 showed reduced serum urea and increased serum creatinine concentrations, tubulointerstitial swelling, interstitial fibrosis, and reduced expression of Trpm6 and Trpv5. Exposure to GBH did not affect the levels of Pb in the kidneys of animals. In conclusion, glyphosate at low doses may cause mild kidney damage. It is necessary to evaluate whether the long-term effects of this constant injury may contribute to the development of chronic kidney disease of uncertain etiology.

Determination of the Ca, Mn, Mg and Fe in honey from multiple species of stingless bee produced in Brazil

Stingless Bees (SB) honey is a product used for different purposes, and it is worth highlighting the presence of metallic species, which can have a nutritional or toxic effect, depending on the metal present and/or the amount ingested. Therefore, the objective of this work was to quickly determine Fe, Mn, Mg and Ca in SB honey, using slurry sampling and FAAS of 88 honey samples from different regions of Brazil. The concentrations varied from < LOD to 364 µg g^-1 (Ca). The order for average concentration in the samples was Ca > Mg > Mn > Fe. Through the principal component analysis, it was verified that the SB honey analyzed in the present study has higher contents of the evaluated metals than the honey of the species Apis mellifera and SB honey from other Brazilian states. Theoretical calculation demonstrated that there is a little contribution of SB honey to human diet in relation to the metals, being more significative for Mn.

Are there pharmaceutical compounds in sediments or in water? Determination of the distribution coefficient of benzodiazepine drugs in aquatic environment

Alprazolam, clonazepam and diazepam are drugs belonging to the benzodiazepine class. These drugs might be important environmental contaminants in aquatic media. A total understanding of behavior and fate of drugs in aquatic environment is not available for these and other drugs. Thus, in this work, a complete optimization of sample treatment and extraction of analytes from sediments and water was described, as well a study of sediment/water distribution comparing it with sample characteristics. Ultrasound for 10 min and 3 steps using 3 mL of extraction solvent were chosen as the stirring form for extraction. A methanol/water (1:1) solution pH 12 was the best extraction solvent. Aiming to eliminate interferences, an addition of 10 μL of NaCl 3.06 mol L^-1 was necessary after each step of extraction. Sediment and water samples were characterized, presenting different values on physical-chemical parameters. Six distinct sample sets of water and sediments were spiked with each benzodiazepine and analyzed. Kd values varied from 1.4 to 9.2 L kg^-1 for clonazepam, 1.8-11.5 L kg^-1 for alprazolam and 2.31-12  L kg^-1 for diazepam. A principal component analysis showed high dependence on Kd with sample characteristics mainly related to sediments. In the systems, whose sediments presented high levels of clay, silt and organic matter, the drugs presented a great interaction with the solid part of the system, increasing the Kd value. Koc values varied from 149.25 to 634.13 L kg^-1 for clonazepam, 186.57-852.48 L kg^-1 for alprazolam, and 194.68-1189.81 L kg^-1 for diazepam.

Fast method to determine the elements in maize flour: reduction in preparation time and reagent consumption

Abstract The aim of this work was to develop and validate methodology to reduce the digestion time and reagent consumption in the determination of minerals in maize flour. The standard methodology employed in Brazil is that described by AOAC. It consists of the calcination of the sample at high temperatures for a long period of time, making the process expensive and slow. In this work, a wet sample digestion method using HNO3 was employed, heating on a block digester with final dissolution in an ultrasonic bath. The validation tests involved linearity and working range studies, and the determination of the detection and quantification limits, accuracy and precision. The sample digestion time was 1:30 h and the percent recoveries for the metals were 93% for Ca, 98% for Cu, 110% for Fe, 97% for Mg, 101% for Mn and 106% for Zn.

Rapid Screening Method for Detecting Ethinyl Estradiol in Natural Water Employing Voltammetry

17α-Ethinyl estradiol (EE2), which is used worldwide in the treatment of some cancers and as a contraceptive, is often found in aquatic systems and is considered a pharmaceutically active compound (PhACs) in the environment. Current methods for the determination of this compound, such as chromatography, are expensive and lengthy and require large amounts of toxic organic solvents. In this work, a voltammetric procedure is developed and validated as a screening tool for detecting EE2 in water samples without prior extraction, clean-up, or derivatization steps. Application of the method we elaborate here to EE2 analysis is unprecedented. EE2 detection was carried out using differential pulse adsorptive cathodic stripping voltammetry (DP AdCSV) with a hanging mercury drop electrode (HMDE) in pH 7.0 Britton-Robinson buffer. The electrochemical process of EE2 reduction was investigated by cyclic voltammetry at different scan rates. Electroreduction of the hormone on a mercury electrode exhibited a peak at -1.16 ± 0.02 V versus Ag/AgCl. The experimental parameters were as follows: -0.7 V accumulation potential, 150 s accumulation time, and 60 mV s^-1 scan rate. The limit of detection was 0.49 μg L^-1 for a preconcentration time of 150 s. Relative standard deviations were less than 13%. The method was applied to the detection of EE2 in water samples with recoveries ranging from 93.7 to 102.5%.

Relationship between geographical origin and contents of Pb, Cd, and Cr in honey samples from the state of Paraná (Brazil) with chemometric approach

The aim of this study was to determine the trace elements, Pb, Cd, and Cr in honey samples from eight different regions from the state of Paraná (Brazil), using slurry sampling graphite furnace atomic absorption spectrometry. Chemometric analysis (principal component analysis (PCA)) was applied to classify honey samples according to their levels of the trace elements Pb, Cd, and Cr, which is also related to the geographical origin of honey samples. The mean concentration for the elements followed the order Pb > Cr > > Cd. The mean values were 200 ± 76, 88 ± 14, and 4.1 ± 4 ng g(-1) for Pb, Cr, and Cd, respectively. It could be verified that honey samples are geographically separated, especially with regard to Pb and Cd contents. Thus, honey can be considered a bioindicator of environmental contamination, suggesting possible contamination in soil, water, and air. This contamination can be related to natural or anthropogenic sources present in the study regions.

Propolis as an indicator of environmental contamination by metals

Concentrations of eleven representative metals (Al, Ca, Cd, Cr, Cu, K, Mg, Mn, Na, Pb and Zn) in forty-two propolis samples were measured by electrothermal atomization and flame atomic absorption spectrometry after calcination in a muffle furnace. Samples were collected from different regions from Paraná State - Brazil where apiculture is an important economic activity. Results showed that the average content of Al, Ca, K, Mg, Mn, Na and Zn in propolis was 0.68, 1.66, 7.59, 1.27, 0.08, 0.58 and 0.02 mg g(-1), respectively. Levels of Al, Ca, and Mg were statistically different in some regions of Paraná and could be used to assign the geographical origin of the propolis. The average concentration of the Cd, Cr, and Pb in raw propolis was 0.13, 5.53 and 9.85 μg g(-1), respectively, and allowed for identification of specific areas with environmental contamination.

Fractionation and potential toxic risk of metals from superficial sediment in Itaipu Lake--boundary between Brazil and Paraguay

The objective of this study was to evaluate fractions of metals (labile and pseudo-total) extracted from sediment samples collected in Itaipu Lake (boundary between Brazil and Paraguay) and to assess the dynamics and mobility of these fractions by identifying the same bioavailability and ecological risk to metals in the aquatic environment. The concentrations of metal ions were determined by flame atomic absorption spectrometry. There was a correlation between the metal ions, both in the labile and the pseudo-total, with regard to particle size. To assess metals concentrations in sediment, numerical sediment-quality guidelines were applied. The concentrations of aluminum, cadmium, iron, manganese, lead, and zinc in all sediment samples are lower than the proposed probable effects level (PEL), thus possibly indicating that there are no harmful effects from these metals. In contrast, concentrations of copper, chromium, and nickel exceeded the PEL in some samples, thus indicating that these stations are at potential risk. The level of contamination in sediments of Itaipu Lake for all metals was evaluated using contamination factor, degree of contamination, and sum-of-metals toxic unit.

Accumulation of chromium and lead in bryophytes and pteridophytes in a stream affected by tannery wastewater

The concentrations of Cr and Pb were determined in bryophytes and pteridophytes sampled in a stream near a tannery in Guarapuava, southern Brazil. The concentrations of Cr and Pb were measured by cathodic and anodic voltammetry, respectively. These plants were used to evaluate the spatial distribution of elements in the examined stream, and contained elevated levels of Cr (0.71-24.07 μg/g) and Pb (4.33-24.20 μg/g). Chromium levels in plants near the tannery greatly exceeded background levels, indicating a severe to extreme degree of contamination with this metal. Lead levels were elevated to a lesser degree, indicating slight to moderate contamination for most plants collected near the tannery.

On-line preconcentration with different solid adsorbents for lead determination

An on-line column preconcentration method based on the combined use of ammonium O,O-diethyldithiophosphate and activated carbon or polyurethane foam as adsorbents has been developed for the determination of Pb in water samples. The complexed Pb was eluted with ethanol and determined by flame atomic absorption spectrometry. The optimum preconcentration conditions are given for each adsorbent. The enrichment factors were 63 and 294, and the detection limits (3sigma) 3 microg L(-1) and 0.8 microg L(-1), respectively, for the carbon and foam systems. When the optimized procedures were applied to the determination of Pb in water samples the recovery efficiency was > 96%.