Room-Temperature Solid-State Transformation of Na4 SnS4 ⋅ 14H2 O into Na4 Sn2 S6 ⋅ 5H2 O: An Unusual Epitaxial Reaction Including Bond Formation, Mass Transport, and Ionic Conductivity

A highly unusual solid-state epitaxy-induced phase transformation of Na₄ SnS₄  ⋅ 14H₂ O (I) into Na₄ Sn₂ S₆  ⋅ 5H₂ O (II) occurs at room temperature. Ab initio molecular dynamics (AIMD) simulations indicate an internal acid-base reaction to form [SnS₃ SH]^3- which condensates to [Sn₂ S₆ ]^4- . The reaction involves a complex sequence of O-H bond cleavage, S^2- protonation, Sn-S bond formation and diffusion of various species while preserving the crystal morphology. In situ Raman and IR spectroscopy evidence the formation of [Sn₂ S₆ ]^4- . DFT calculations allowed assignment of all bands appearing during the transformation. X-ray diffraction and in situ ¹ H NMR demonstrate a transformation within several days and yield a reaction turnover of ≈0.38 %/h. AIMD and experimental ionic conductivity data closely follow a Vogel-Fulcher-Tammann type T dependence with D(Na)=6×10^-14  m²  s^-1 at T=300 K with values increasing by three orders of magnitude from -20 to +25 °C.

Photo-Crosslinked Single-Ion Conducting Polymer Electrolyte for Lithium-Metal Batteries

Polymer electrolytes are considered potential key enablers for lithium-metal batteries due to their compatibility with the lithium-metal negative electrode. Herein, crosslinked selfstanding single-ion conducting polymer electrolytes were obtained via a facile UVinitiated radical polymerization using pentaerythritol tetraacrylate as the crosslinker and lithium (3methacryloyloxypropylsulfonyl)-(trifluoromethylsulfonyl)imide as ionic functional group. Incorporating propylene carbonate as charge-transport supporting additive allowed for achieving single-ion conductivities of 0.21 mS cm^-1 at 20°C and 0.40 mS cm^-1 at 40°C, while maintaining a suitable electrochemical stability window for 4V-class positive electrodes (cathodes). As a result, this single-ion polymer electrolyte featured good cycling stability and rate capability in Li||LiFePO₄ and Li||LiNi_0.6 Mn_0.2 Co_0.2 O₂ cells. These results render this polymer electrolyte as potential alternative to liquid electrolytes for high-energy lithium-metal batteries. This article is protected by copyright. All rights reserved.

Nuclear magnetic resonance (NMR) studies of sintering effects on the lithium ion dynamics in Li1.5Al0.5Ti1.5(PO4)3

Various nuclear magnetic resonance (NMR) methods are combined to study the structure and dynamics of Li1.5Al0.5Ti1.5(PO4)3 (LATP) samples, which were obtained from sintering at various temperatures between 650 and 900 °C. 6Li, 27Al, and 31P magic angle spinning (MAS) NMR spectra show that LATP crystallites are better defined for higher calcination temperatures. Analysis of 7Li spin-lattice relaxation and line-shape changes indicates the existence of two species of lithium ions with clearly distinguishable jump dynamics, which can be attributed to crystalline and amorphous sample regions, respectively. An increase of the sintering temperature leads to higher fractions of the fast lithium species with respect to the slow one, but hardly affects the jump dynamics in either of the phases. Specifically, the fast and slow lithium ions show jumps in the nanoseconds regime near 300 and 700 K, respectively. The activation energy of the hopping motion in the LATP crystallites amounts to ca. 0.26 eV. 7Li field-gradient diffusometry reveals that the long-range ion migration is limited by the sample regions featuring slow transport. The high spatial resolution available from the high static field gradients of our setup allows the observation of the lithium ion diffusion inside the small (<100 nm) LATP crystallites, yielding a high self-diffusion coefficient of D = 2 × 10−12 m2/s at room temperature.

Garnet to hydrogarnet: effect of post synthesis treatment on cation substituted LLZO solid electrolyte and its effect on Li ion conductivity

We investigated why commercial Li₇La₃Zr₂O₁₂ (LLZO) with Nb- and Ta substitution shows very low mobility on a local scale, as observed with temperature-dependent NMR techniques, compared to Al and W substituted samples, although impedance spectroscopy on sintered pellets suggests something else: conductivity values do not show a strong dependence on the type of substituting cation. We observed that mechanical treatment of these materials causes a symmetry reduction from garnet to hydrogarnet structure. To understand the impact of this lower symmetric structure in detail and its effect on the Li ion conductivity, neutron powder diffraction and ⁶Li NMR were utilized. Despite the finding that, in some materials, disorder can be beneficial with respect to ionic conductivity, pulsed-field gradient NMR measurements of the long-range transport indicate a higher Li⁺ diffusion barrier in the lower symmetric hydrogarnet structure. The symmetry reduction can be reversed back to the higher symmetric garnet structure by annealing at 1100 °C. This unintended phase transition and thus a reduction in conductivity is crucial for the processing of LLZO materials in the fabrication of all-solid state batteries.

Investigation of commercial Li₇La₃Zr₂O₁₂ (LLZO) with various substituents. Although impedance spectroscopy suggests something else: the ion conductivity does not show a strong dependence on the substituting cation, but rather on the sample treatment.

Structure-Property Relationship of Polymerized Ionic Liquids for Solid-State Electrolyte Membranes

Eight new polymerized ammonium-based ionic liquids were prepared as thin membrane films and evaluated within the scope of their usage in lithium-ion batteries. The focus of this work is to get a better understanding of the influence of structural modifications of the monomers on the polymerized materials. Further, different concentrations of a lithium-ion conducting salt were applied in order to receive an optimized combination of monomer structure and lithium salt concentration. It was found that an increased side chain length of the studied ammonium-based polymerized ionic liquids leads to a reduction in glass transition temperatures and increased ionic conductivity values. As a result of the addition of conducting salt to the PIL membranes, the glass transition temperatures and the ionic conductivity values decreases. Nevertheless, PFG-NMR reveals a higher lithium-ion mobility for a sample with higher conducting salt content.

Organic Liquid Crystals as Single-Ion Li+ Conductors

The development of new materials for tomorrow's electrochemical energy storage technologies, based on thoroughly designed molecular architectures is at the forefront of materials research. In this line, we report herein the development of a new class of organic lithium-ion battery electrolytes, thermotropic liquid crystalline single-ion conductors, for which the single-ion charge transport is decoupled from the molecular dynamics (i. e., obeys Arrhenius-type conductivity) just like in inorganic (single-)ion conductors. Focusing on an in-depth understanding of the structure-to-transport interplay and the demonstration of the proof-of-concept, we provide also strategies for their further development, as illustrated by the introduction of additional ionic groups to increase the charge carrier density, which results in a substantially enhanced ionic conductivity especially at lower temperatures.

Li7GeS5Br-An Argyrodite Li-Ion Conductor Prepared by Mechanochemical Synthesis

In recent years, the search for glassy and ceramic Li⁺ superionic conductors has received significant attention, mainly due to the renaissance of interest in all-solid-state batteries. Here, we report the mechanochemical synthesis of metastable Li₇GeS₅Br, which is, to the best of our knowledge, the first compound of the Li₂S-GeS₂-LiBr system. Applying combined synchrotron X-ray diffraction and neutron powder diffraction, we show Li₇GeS₅Br to crystallize in the F4̅3m space group and to be isostructural with argyrodite-type Li₆PS₅Br, but with a distinct difference in the S^2-/Br^- site disorder (and improved anodic stability). Electrochemical impedance spectroscopy indicates an electrical (ionic) conductivity of 0.63 mS cm^-1 at 298 K, with an activation energy for conduction of 0.43 eV. This is supported by temperature-dependent ⁷Li pulsed-field gradient-nuclear magnetic resonance spectroscopy measurements. Overall, the results demonstrate that novel (metastable) argyrodite-type solid electrolytes can be prepared via mechanochemistry that are not accessible by conventional solid-state synthesis routes.

Correction: Influence of residual water and cation acidity on the ionic transport mechanism in proton-conducting ionic liquids

Correction for 'Influence of residual water and cation acidity on the ionic transport mechanism in proton-conducting ionic liquids' by Jingjing Lin et al., Phys. Chem. Chem. Phys., 2020, 22, 1145-1153.

Influence of residual water and cation acidity on the ionic transport mechanism in proton-conducting ionic liquids

Proton-conducting ionic liquids (PILs) are discussed herein as potential new electrolytes for polymer membrane fuel cells, suitable for operation temperatures above 100 °C. During fuel cell operation, the presence of significant amounts of residual water is unavoidable, even at these elevated temperatures. By using electrochemical and NMR methods, the impact of residual water on 2-sulfoethylmethylammonium triflate [2-Sema][TfO], 1-ethylimidazolium triflate [1-EIm][TfO] and diethylmethylammonium triflate [Dema][TfO] is analyzed. The cationic acidity of these PILs varies by over ten orders of magnitude. Appropriate amounts of the PIL and H2O were mixed at various molar ratios to obtain compositions, varying from the neat PIL to H2O-excess conditions. The conductivity of [2-Sema][TfO] exponentially increases depending on the H2O concentration. The results from 1H-NMR spectroscopy and self-diffusion coefficient measurements by 1H field-gradient NMR indicate a fast proton exchange process between [2-Sema]+ and H2O. Conversely, [1-EIm][TfO] and [Dema][TfO] show only very slow or non-significant proton exchange, respectively, with H2O during the time-scale relevant for transport. The proton conduction follows a combination of vehicle and cooperative mechanisms in highly acidic PIL, while a mostly vehicle mechanism in medium and low acidic PIL occurs. Therefore, highly acidic ionic liquids are promising new candidates for polymer electrolyte fuel cells at an elevated temperature.

A Crosslinked Polyethyleneglycol Solid Electrolyte Dissolving Lithium Bis(trifluoromethylsulfonyl)imide for Rechargeable Lithium Batteries

Replacing liquid electrolytes with solid ones can provide advantages in safety, and all-solid-state batteries with solid electrolytes are proposed to solve the issue of the formation of lithium dendrites. In this study, a crosslinked polymer composite solid electrolyte was presented, which enabled the construction of lithium batteries with outstanding electrochemical behavior over long-term cycling. The crosslinked polymeric host was synthesized through polymerization of the terminal amines of O,O-bis(2-aminopropyl) polypropylene glycol-block-polyethylene glycol-block-polypropylene glycol and terminal epoxy groups of bisphenol A diglycidyl ether at 90 °C and provided an amorphous matrix for Li⁺ dissolution. This composite solid electrolyte containing Li⁺ salt and garnet filler exhibited high flexibility, which supported the formation of favorable interfaces with the active materials, and possessed enough mechanical strength to suppress the penetration of lithium dendrites. Ionic conductivities higher than 5.0×10^-4  S cm^-1 above 45 °C were obtained as well as a wide electrochemical stability window (>4.51 V vs. Li/Li⁺ ) and a high Li⁺ diffusion coefficient (≈16.6×10^-13  m²  s^-1 ). High cycling stability (>500 cycles or 1000 h) was demonstrated.

Hybrid particles derived from alendronate and bioactive glass for treatment of osteoporotic bone defects

Novel hybrid particles are synthesized using alendronate and bioactive glass, which can stimulate regeneration of osteoporotic bone defects.

Inducing High Ionic Conductivity in the Lithium Superionic Argyrodites Li6+ xP1- xGe xS5I for All-Solid-State Batteries

Solid-state batteries with inorganic solid electrolytes are currently being discussed as a more reliable and safer future alternative to the current lithium-ion battery technology. To compete with state-of-the-art lithium-ion batteries, solid electrolytes with higher ionic conductivities are needed, especially if thick electrode configurations are to be used. In the search for optimized ionic conductors, the lithium argyrodites have attracted a lot of interest. Here, we systematically explore the influence of aliovalent substitution in Li_{6+ x}P_{1- x}Ge _xS₅I using a combination of X-ray and neutron diffraction, as well as impedance spectroscopy and nuclear magnetic resonance. With increasing Ge content, an anion site disorder is induced and the activation barrier for ionic motion drops significantly, leading to the fastest lithium argyrodite so far with 5.4 ± 0.8 mS cm^-1 in a cold-pressed state and 18.4 ± 2.7 mS cm^-1 upon sintering. These high ionic conductivities allow for successful implementation within a thick-electrode solid-state battery that shows negligible capacity fade over 150 cycles. The observed changes in the activation barrier and changing site disorder provide an additional approach toward designing better performing solid electrolytes.

Solid-state NMR characterization of tri-ethyleneglycol grafted polyisocyanopeptides

In aqueous media, ethylene glycol substituted polyisocyanopeptides (PICPs) change their state (undergo a sol-to-gel transition) as a response to temperature. This makes them promising materials for various biomedical applications, for instance, for controlled drug release and non-damaging wound dressing. To utilize PICP in biomedical applications, understanding of the origin of the gelation process is needed, but this is experimentally difficult because of the notoriously low gelator concentration in combination with the slow polymer dynamics in the sample. This paper describes a detailed characterization of the dried state of PICPs by solid-state NMR measurements. Both the (13) C and the (1) H NMR resonances were assigned using a combination of 1D cross-polarization magic angle spinning, 2D (13) C-(1) H heteronuclear correlation spectra and (1) H-(1) H single quantum-double quantum experiments. In addition, the chemical groups involved in dipolar interaction with each other were used to discuss the dynamics and spatial conformation of the polymer. In contrast to other PICP polymers, two resonances for the backbone carbon are observed, which are present in equal amounts. The possible origin of these resonances is discussed in the last section of this work. The data obtained during the current studies will be further used in elucidating mechanisms of the bundling and gelation. A comprehensive picture will make it possible to tailor polymer properties to meet specific needs in different applications. Copyright © 2015 John Wiley & Sons, Ltd.

Dual-functionalisation of gelatine nanoparticles with an anticancer platinum(ii)–bisphosphonate complex and mineral-binding alendronate

Mineral-binding gelatine nanoparticles can be loaded with tailored amounts of anticancer molecules, which may benefit the development of bone-seeking carriers for targeted delivery of drugs to treat bone tumours.

Slow motions in microcrystalline proteins as observed by MAS-dependent 15N rotating-frame NMR relaxation

(15)N NMR relaxation rate R1ρ measurements reveal that a substantial fraction of residues in the microcrystalline chicken alpha-spectrin SH3 domain protein undergoes dynamics in the μs-ms timescale range. On the basis of a comparison of 2D site-resolved with 1D integrated (15)N spectral intensities, we demonstrate that the significant fraction of broad signals in the 2D spectrum exhibits the most pronounced slow mobility. We show that (15)N R1ρ's in proton-diluted protein samples are practically free from the coherent spin-spin contribution even at low MAS rates, and thus can be analysed quantitatively. Moderate MAS rates (10-30 kHz) can be more advantageous in comparison with the rates >50-60 kHz when slow dynamics are to be identified and quantified by means of R1ρ experiments.

Internal protein dynamics on ps to μs timescales as studied by multi-frequency (15)N solid-state NMR relaxation

A comprehensive analysis of the dynamics of the SH3 domain of chicken alpha-spectrin is presented, based upon (15)N T1 and on- and off-resonance T1ρ relaxation times obtained on deuterated samples with a partial back-exchange of labile protons under a variety of the experimental conditions, taking explicitly into account the dipolar order parameters calculated from (15)N-(1)H dipole-dipole couplings. It is demonstrated that such a multi-frequency approach enables access to motional correlation times spanning about 6 orders of magnitude. We asses the validity of different motional models based upon orientation autocorrelation functions with a different number of motional components. We find that for many residues a "two components" model is not sufficient for a good description of the data and more complicated fitting models must be considered. We show that slow motions with correlation times on the order of 1-10 μs can be determined reliably in spite of rather low apparent amplitudes (below 1 %), and demonstrate that the distribution of the protein backbone mobility along the time scale axis is pronouncedly non-uniform and non-monotonic: two domains of fast (τ < 10(-10) s) and intermediate (10(-9) s < τ < 10(-7) s) motions are separated by a gap of one order of magnitude in time with almost no motions. For slower motions (τ > 10(-6) s) we observe a sharp ~1 order of magnitude decrease of the apparent motional amplitudes. Such a distribution obviously reflects different nature of backbone motions on different time scales, where the slow end may be attributed to weakly populated "excited states." Surprisingly, our data reveal no clearly evident correlations between secondary structure of the protein and motional parameters. We also could not notice any unambiguous correlations between motions in different time scales along the protein backbone emphasizing the importance of the inter-residue interactions and the cooperative nature of protein dynamics.

The relation of the X-ray B-factor to protein dynamics: insights from recent dynamic solid-state NMR data

In addressing the potential use of B-factors derived from X-ray scattering data of proteins for the understanding the (functional) dynamics of proteins, we present a comparison of B-factors of five different proteins (SH3 domain, Crh, GB1, ubiquitin and thioredoxin) with data from recent solid-state nuclear magnetic resonance experiments reflecting true (rotational) dynamics on well-defined timescales. Apart from trivial correlations involving mobile loop regions and chain termini, we find no significant correlation of B-factors with the dynamic data on any of the investigated timescales, concluding that there is no unique and general correlation of B-factors with the internal reorientational dynamics of proteins.

13C and 15N NMR study of the hydration response of T4 lysozyme and alphaB-crystallin internal dynamics

The response to hydration of the internal protein dynamics was studied by the means of solid state NMR relaxation and magic angle spinning exchange techniques. Two proteins, lysozyme from bacteriophage T4 and human alphaB-crystallin were used as exemplars. The relaxation rates R1 and R1rho of 13C and 15N nuclei were measured as a function of a hydration level of the proteins in the range 0-0.6 g of water/g of protein. Both proteins were totally 15N-enriched with natural 13C abundance. The relaxation rates were measured for different spectral bands (peaks) that enabled the characterization of the dynamics separately for the backbone, side chains, and CH3 and NH3+ groups. The data obtained allowed a comparative analysis of the hydration response of the protein dynamics in different frequency ranges and different sites in the protein for two different proteins and two magnetic nuclei. The most important result is a demonstration of a qualitatively different response to hydration of the internal dynamics in different frequency ranges. The amplitude of the fast (nanosecond time scale) motion gradually increases with increasing hydration, whereas that of the slow (microsecond time scale) motion increases only until the hydration level 0.2-0.3 g of water/g of protein and then shows almost no hydration dependence. The reason for such a difference is discussed in terms of the different physical natures of these two dynamic processes. Backbone and side chain nuclei show the same features of the response of dynamics with hydration despite the fact that the backbone motional amplitudes are much smaller than those of side chains. Although T4 lysozyme and alphaB-crystallin possess rather different structural and biochemical properties, both proteins show qualitatively very similar hydration responses. In addition to the internal motions, exchange NMR data enabled the identification of one more type of motion in the millisecond to second time scale that appears only at high hydration levels. This motion was attributed to the restricted librations of the protein as a whole.

Subunit Mobility and the Chaperone Activity of Recombinant alphaB-Crystallin

The comparison of the chaperone-like activity of native and covalently cross-linked human αB-crystallins has confirmed the important role of the subunit mobility in the chaperoning mechanism. Our data clearly demonstrate that the chaperone-like activity of α-crystallin is not only a surface phenomenon as was suggested by some researchers.