Confined microemulsions: pore diameter induced change of the phase behavior

In the present work, the temperature-dependent phase behavior of a C10E4 based microemulsion is studied in different meso-macroporous glasses, as a function of their pore diameter. The phase behavior in these pores is investigated by small-angle X-ray scattering (SAXS). The crucial parameter we discuss based on the SAXS results is the domain size of the bicontinuous phase. Using a simplified model to fit the scattering data, we can observe the microemulsion inside the pores. These experiments reveal a temperature-dependent change in domain sizes of the bicontinuous microemulsion only for large pores.

A review of stimuli-responsive polymer-based gating membranes

The formation and properties of smart (stimuli-responsive) membranes are reviewed, with a special focus on temperature and pH triggering of gating to water, ions, polymers, nanoparticles, or other molecules of interest. The review is organized in two parts, starting with all-smart membranes based on intrinsically smart materials, in particular of the poly(N-isopropylacrylamide) family and similar polymers. The key steps of membrane fabrication are discussed, namely the deposition into thin films, functionalization of pores, and the secondary crosslinking of pre-existing microgel particles into membranes. The latter may be free-standing and do not necessitate the presence of a porous support layer. The temperature-dependent swelling properties of polymers provide a means of controlling the size of pores, and thus size-sensitive gating. Throughout the review, we highlight "positive" (gates open) or "negative" (closed) gating effects with respect to increasing temperature. In the second part, the functionalization of porous organic or inorganic membranes of various origins by either microgel particles or linear polymer brushes is discussed. In this case, the key steps are the adsorption or grafting mechanisms. Finally, whenever provided by the authors, the suitability of smart gating membranes for specific applications is highlighted.

Release Kinetics of Potassium, Calcium, and Iron Cations from Carboxymethyl Cellulose Hydrogels at Different pH Values

In an in-depth study of the mechanism of cation release from carboxymethyl cellulose hydrogels synthesized through Schiff base reaction, we analyze the differences in the release kinetics of potassium, calcium, and iron cations with Peleg model at pH values of pH 3.5 and pH 8.5 using ICP-OES (inductively coupled plasma optical emission spectroscopy) technique.

Hard carbon microspheres with bimodal size distribution and hierarchical porosity via hydrothermal carbonization of trehalose

Hydrothermal carbonization (HTC) is an efficient thermochemical method for the conversion of organic feedstock to carbonaceous solids. HTC of different saccharides is known to produce microspheres (MS) with mostly Gaussian size distribution, which are utilized as functional materials in various applications, both as pristine MS and as a precursor for hard carbon MS. Although the average size of the MS can be influenced by adjusting the process parameters, there is no reliable mechanism to affect their size distribution. Our results demonstrate that HTC of trehalose, in contrast to other saccharides, results in a distinctly bimodal sphere diameter distribution consisting of small spheres with diameters of (2.1 ± 0.2) μm and of large spheres with diameters of (10.4 ± 2.6) μm. Remarkably, after pyrolytic post-carbonization at 1000 °C the MS develop a multimodal pore size distribution with abundant macropores > 100 nm, mesopores > 10 nm and micropores < 2 nm, which were examined by small-angle X-ray scattering and visualized by charge-compensated helium ion microscopy. The bimodal size distribution and hierarchical porosity provide an extraordinary set of properties and potential variables for the tailored synthesis of hierarchical porous carbons, making trehalose-derived hard carbon MS a highly promising material for applications in catalysis, filtration, and energy storage devices.

Growth of Smart Microgels in a Flow Reactor Scrutinized by In-Line SAXS

In this work, a continuous flow setup for in situ investigation of microgel growth with small-angle X-ray scattering (SAXS) is established. Poly(N-n-propylacrylamide) (PNNPAM) and poly(N-isopropylacrylamide) (PNIPAM) microgels are synthesized in H2O at different residence times inside a continuous flow reactor. The microgels are investigated by in situ SAXS and ex situ photon correlation spectroscopy. The size of the microgels was found to be reproducible in independent experiments with run times of up to 7 h. Already the scattering curves of the microgels with a time of residence of 15 min show a well-defined form factor. Further analysis of the scattering profiles confirms the spherical shape of the microgels. At a residence time of 2 min, the scattering intensity is significantly lower corresponding to a smaller particle size. The experimental conditions remain constant over time, which is crucial for long-time experiments. The PNNPAM system is found to be more suitable for the flow reactor experiment with in-line SAXS as it shows less polymer deposition in the tubing and forms particles with lower polydispersity. The presented reactor is characterized by a compact design and offers a plug-and-play setup close to the sample environment. This work paves the way for investigations of microgel growth at e.g. synchrotron X-ray beamlines.

Lipid nanoparticles for antisense oligonucleotide gene interference into brain border-associated macrophages

A colloidal synthesis’ proof-of-concept based on the Bligh–Dyer emulsion inversion method was designed for integrating into lipid nanoparticles (LNPs) cell-permeating DNA antisense oligonucleotides (ASOs), also known as GapmeRs (GRs), for mRNA interference. The GR@LNPs were formulated to target brain border-associated macrophages (BAMs) as a central nervous system (CNS) therapy platform for silencing neuroinflammation-related genes. We specifically aim at inhibiting the expression of the gene encoding for lipocalin-type prostaglandin D synthase (L-PGDS), an anti-inflammatory enzyme expressed in BAMs, whose level of expression is altered in neuropsychopathologies such as depression and schizophrenia. The GR@LNPs are expected to demonstrate a bio-orthogonal genetic activity reacting with L-PGDS gene transcripts inside the living system without interfering with other genetic or biochemical circuitries. To facilitate selective BAM phagocytosis and avoid subsidiary absorption by other cells, they were functionalized with a mannosylated lipid as a specific MAN ligand for the mannose receptor presented by the macrophage surface. The GR@LNPs showed a high GR-packing density in a compact multilamellar configuration as structurally characterized by light scattering, zeta potential, and transmission electronic microscopy. As a preliminary biological evaluation of the mannosylated GR@LNP nanovectors into specifically targeted BAMs, we detected in vivo gene interference after brain delivery by intracerebroventricular injection (ICV) in Wistar rats subjected to gene therapy protocol. The results pave the way towards novel gene therapy platforms for advanced treatment of neuroinflammation-related pathologies with ASO@LNP nanovectors.

Pd Nanoparticle-Loaded Smart Microgel-Based Membranes as Reusable Catalysts

In this work, palladium-loaded smart membranes made by UV cross-linking of thermoresponsive microgels are prepared to obtain a reusable, catalytically active material which can, for example, be implemented in chemical reactors. The membranes are examined with respect to their coverage of a supporting mesh via atomic force microscopy measurements. Force indentation mapping was performed in the dried, collapsed state and in the swollen state in water to determine the Young modulus. Furthermore, we compare the catalytic activity of the membrane with the corresponding suspended colloidal nanoparticle microgel hybrids. For this purpose, the reduction of 4-nitrophenol is an established model reaction to quantify the catalytic activity by UV-vis spectroscopy. The membrane is embedded inside a continuous stirred tank reactor equipped for continuous monitoring of the reaction progress. Although catalysis with membranes shows lower catalytic activity than freely dispersed particles, membranes allow straightforward separation and recycling of the catalyst. The fabricated membranes in this work show no decrease in catalytic activity between several cycles, unlike free particles. The feasible and durable deposition of catalytically active inter-cross-linked microgel particles on commercial nylon meshes as supporting scaffolds, as demonstrated in this work, is promising for up-scaling of continuous industrial processes.

Core-shell microgels synthesized in continuous flow: deep insight into shell growth using temperature-dependent FTIR

While core-shell microgels have been intensively studied in their fully synthesized state, the formation mechanism of the shell has not been completely understood. Such insight is decisive for a customization of microgel properties for applications. In this work, microgels based on a N-isopropylmethacrylamide (NiPMAM) core and a N-n-propylacrylamide (NnPAM) shell are synthesized in a continuous flow reactor. The shell growth is studied depending on the solution's time of residence inside the reactor. PCS experiments reveal a significant decrease of the volume phase transition temperatures of the core and the shell, with increasing residence time. At early stages, a decreased swelling capacity is found before a discrete NnPAM shell is formed. Temperature-dependent FTIR spectroscopy shows that the decreased swelling capacity originates from a pronounced interpenetrated network (IPN) between NnPAM and NiPMAM. AFM images resolve heterogeneously distributed shell material after 3 min, pointing to an aggregation of NnPAM domains before the distinct shell forms. The combination of diffusional properties, AFM images and vibrational information confirms a deeply interpenetrated network already at early stages of the precipitation polymerization, in which the shell material heavily influences the swelling properties.

Multifunctional Core-Shell Microgels as Pd-Nanoparticle Containing Nanoreactors With Enhanced Catalytic Turnover

In this work, we present core-shell microgels with tailor-made architecture and properties for the incorporation of palladium nanoparticles. The microgel core consists of poly-N-isopropylacrylamide (PNIPAM) copolymerized with methacrylic acid (MAc) as anchor point for the incorporation of palladium nanoparticles. The microgel shell is prepared by copolymerization of NIPAM and the UV-sensitive comonomer 2-hydroxy-4-(methacryloyloxy)-benzophenone (HMABP). The obtained core-shell architecture was analyzed by means of photon correlation spectroscopy, while the incorporated amount of HMABP was further confirmed via Fourier transform infrared spectroscopy. Subsequently, the microgel system was used for loading with palladium nanoparticles and their size and localization were investigated by transmission electron microscopy. The catalytic activity of the monodisperse palladium nanoparticles was tested by reduction of 4-nitrophenol to 4-aminophenol. The obtained reaction rate constants for the core-shell system showed enhanced activity compared to the Pd-loaded bare core system. Furthermore, it was possible to recycle the catalyst several times. Analysis via transmission electron microscopy revealed, that the incorporated palladium nanoparticles emerged undamaged after the reaction and subsequent purification process since no aggregation or loss in size was observed.

Modified Flory–Rehner Theory Describes Thermotropic Swelling Transition of Smart Copolymer Microgels

In the present article, we use an improved Flory–Rehner theory to describe the swelling behavior of copolymer microgels, where the interaction parameter is modeled by a Hill-like equation for a cooperative thermotropic transition. This description leads to very good fits of the swelling curves of the copolymer microgels at different comonomer contents (30 mol%, 50 mol% and 70 mol%) obtained by photon correlation spectroscopy. Fixed parameters, which are universally applicable for the respective monomers given in our previous work, are used to fit the swelling curves. The analysis of the swelling curves yields physically reasonable and meaningful results for the remaining adjustable parameters. The comonomer content of the statistical copolymer microgels poly(NNPAM-co-NIPAM), poly(NIPAM-co-NIPMAM) and poly(NIPMAM-co-NNPAM) is determined by nuclear magnetic resonance spectroscopy and is in agreement with the nominal comonomer feed used in the synthesis. To investigate the volume phase transition at a molecular level, swelling curves are also measured by Fourier transformation infrared spectroscopy. The obtained swelling curves are also fitted using the Hill-like model. The fits provide physically reasonable parameters too, consistent with the results from photon correlation spectroscopy.

Adhesion, proliferation and detachment of various cell types on thermoresponsive microgel coatings

Cutting-edge biomedical applications require increasingly complex and fastidious cell systems, for example, various classes of primary or stem cells. Their cultivation, however, still differs little from 30 years ago. This especially applies to the use of indiscriminative proteases for non-specific cell detachment. A far more gentle alternative changes the adhesive properties of the cell culture substrates through coatings based on thermoresponsive polymers. Such polymers mediate cell adhesion at 3 7 ∘ C, but become repulsive upon a cell-compatible temperature drop to e.g. 3 2 ∘ C. While the high functionality of this method has already been well proven, it must also be easy and reproducible to apply. Here, we emphasize the potential of standard cell culture materials coated by spraying with thermoresponsive microgels for routine cultivation and beyond. On these surfaces, we successfully cultivated and detached various cell types, including induced pluripotent stem cells (iPS-cells) and cells in serum-free culture on. In addition, we evaluated the compatibility of the microgel-sprayed surfaces with adhesion-promoting proteins, which are essential for e.g. stem cells or neuronal cells. Finally, we demonstrate that the microgel surfaces do not impair proliferation and show their long-term stability. We conclude that for cell detachment, thermoresponsive cell culture substrates can fully substitute proteases, like trypsin, by employing a comparably straightforward protocol that is compatible with many industrial processing lines. This article is protected by copyright. All rights reserved.

Acrylamide-Based Pd-Nanoparticle Carriers as Smart Catalysts for the Suzuki–Miyaura Cross-Coupling of Amino Acids

Polyacrylamide-based waterborne microgels were prepared with copolymerized carboxylic acid and tertiary amine moieties. The colloidal gels were loaded with palladium nanoparticles and utilized for the Suzuki–Miyaura cross-coupling of amino acids and peptides. The thermoresponsive properties of the prepared microgels were characterized by means of photon correlation spectroscopy (PCS) at solvent conditions of the catalytic reaction. The localization and morphology of the incorporated nanoparticles were characterized with transmission electron microscopy (TEM). Palladium-catalyzed Suzuki–Miyaura cross-coupling of N α-Boc-4-iodophenylalanine and N α-Boc-7-bromotryptophan with phenylboronic acid was carried out under ambient atmosphere in water at 20, 37, and 60 °C, respectively. The properties of the thermoresponsive microgel showed a strong influence on the reactivity and selectivity towards the respective substrate. For the amine containing microgels, a recyclability for up to four cycles without loss in activity could be realized. Furthermore, the systems showed good catalytic activity regarding Suzuki–Miyaura cross-coupling of halogenated amino acids in selected tri- and tetrapeptides.

Thermoresponsive Microgel-Based Free-Standing Membranes: Influence of Different Microgel Cross-Linkers on Membrane Function

In this study we show a possibility to produce thermoresponsive, free-standing microgel membranes based on N-isopropylacrylamide (NIPAM) and the UV-sensitive comonomer 2-hydroxy-4-(methacryloyloxy)benzophenone (HMABP). To influence the final network structure and functionality of the membranes, we use different cross-linkers in the microgel syntheses and characterize the resulting structural microgel properties and the swelling behavior by means of AFM, FTIR, and PCS measurements. Varying the cross-linker results in significant changes in the structure and swelling behavior of the individual microgels and has an influence on the incorporation of the comonomer, which is essential for subsequent photochemical membrane formation. We investigate the ion transport through the different membranes by temperature-dependent resistance measurements revealing a sharp increase in resistance when the copolymer microgels reach their collapsed state. The resistance of the membranes can be adjusted by different cross-linkers and the associated incorporation of the comonomer. Furthermore, we show that transferring a reversible cross-linker from a cross-linked state to an un-cross-linked state strongly influences the membrane properties and even reverses the switching behavior, while the mechanical stability of the membrane is maintained.

Protein Nanopore Membranes Prepared by a Simple Langmuir-Schaefer Approach

Filtration through membranes with nanopores is typically associated with high transmembrane pressures and high energy consumption. This problem can be addressed by reducing the respective membrane thickness. Here, a simple procedure is described to prepare ultrathin membranes based on protein nanopores, which exhibit excellent water permeance, two orders of magnitude superior to comparable, industrially applied membranes. Furthermore, incorporation of either closed or open protein nanopores allows tailoring the membrane's ion permeability. To form such membranes, the transmembrane protein ferric hydroxamate uptake protein component A (FhuA) or its open-pore variant are assembled at the air-water interface of a Langmuir trough, compressed to a dense film, crosslinked by glutaraldehyde, and transferred to various support materials. This approach allows to prepare monolayer or multilayer membranes with a very high density of protein nanopores. Freestanding membranes covering holes up to 5 μm in diameter are visualized by atomic force microscopy (AFM), helium ion microscopy, and transmission electron microscopy. AFM PeakForce quantitative nanomechanical property mapping (PeakForce QNM)  demonstrates remarkable mechanical stability and elastic properties of freestanding monolayer membranes with a thickness of only 5 nm. The new protein membrane can pave the way to energy-efficient nanofiltration.

Stable DOPG/Glycyrrhizin Vesicles with a Wide Range of Mixing Ratios: Structure and Stability as Seen by Scattering Experiments and Cryo-TEM

Phosphatidylglycerols represent a large share of the lipids in the plasmamembrane of procaryotes. Therefore, this study investigates the role of charged lipids in the plasma membrane with respect to the interaction of the antiviral saponin glycyrrhizin with such membranes. Glycyrrhizin is a natural triterpenic-based surfactant found in licorice. Vesicles made of 1,2-dioleoyl-sn-glycero-3-phospho-rac-(1’-glycerol) (DOPG)/glycyrrhizin are characterized by small-angle scattering with neutrons and X-rays (SANS and SAXS). Small-angle scattering data are first evaluated by the model-independent modified Kratky–Porod method and afterwards fitted by a model describing the shape of small unilamellar vesicles (SUV) with an internal head-tail contrast. Complete miscibility of DOPG and glycyrrhizin was revealed even at a ratio of lipid:saponin of 1:1. Additional information about the chain-chain correlation distance of the lipid/saponin mixtures in the SUV structures is obtained from wide-angle X-ray scattering (WAXS).

Pepsin Digest of Gliadin Forms Spontaneously Amyloid-Like Nanostructures Influencing the Expression of Selected Pro-Inflammatory, Chemoattractant, and Apoptotic Genes in Caco-2 Cells: Implications for Gluten-Related Disorders

SCOPE

Proteolysis-resistant gliadin peptides are intensely investigated in biomedical research relates to celiac disease and gluten-related disorders. Herein, the first integrated supramolecular investigation of pepsin-digested gliadin peptides (p-gliadin) is presented in combination with its functional behavior in the Caco-2 cell line.

METHODS AND RESULTS

First, gliadins are degraded by pepsin at pH 3, and the physicochemical properties of p-gliadin are compared with gliadin. An integrated approach using interfacial, spectroscopic, and microscopic techniques reveals that the p-gliadin forms spontaneously soluble large supramolecular structures, mainly oligomers and fibrils, capable of binding amyloid-sensitive dyes. The self-assembly of p-gliadin starts at a concentration of 0.40 µg mL^-1 . Second, the stimulation of Caco-2 cells with the p-gliadin supramolecular system is performed, and the mRNA expression levels of a panel of genes are tested. The experiments show that p-gliadin composed of supramolecular structures triggers significant mRNA up-regulation (p < 0.05) of pro-apoptotic biomarkers (ratio Bcl2/Bak-1), chemokines (CCL2, CCL3, CCL4, CCL5, CXCL8), and the chemokine receptor CXCR3.

CONCLUSIONS

This work demonstrates that p-gliadin is interfacial active, forming spontaneously amyloid-type structures that trigger genes in the Caco-2 cell line involved in recruiting specialized immune cells.

Temperature Controlled Loading and Release of the Anti-Inflammatory Drug Cannabidiol by Smart Microgels

CBD is a promising candidate for treatment of many diseases and plays a major role in the growing trend to produce high-end drugs from natural, renewable resources. In the present work, we demonstrate a way to incorporate the anti-inflammatory drug CBD into smart microgel particles. The copolymer microgels that we chose as carrier systems exhibit a volume phase transition temperature of 39 ∘C, which is just above normal body temperature and makes them ideal candidates for hyperthermia treatment. While a simple loading route of CBD was not successful due to the enormous hydrophobicity of CBD, an alternative route was developed by immersing the microgels in ethanol. Despite the expected loss of thermoresponsive behaviour of the microgel matrix due to the solvent exchange, a temperature-dependent release of CBD was detected by the material, creating an interesting question of interactions between CBD and the microgel particles in ethanol. Furthermore, the method developed for loading of the microgel particles with CBD in ethanol was further improved by a subsequent transfer of the loaded particles into water, which proves to be an even more promising approach due to the successful temperature-dependent release of the drug above the collapse temperature of the microgels.

Accounting for Cooperativity in the Thermotropic Volume Phase Transition of Smart Microgels

A full quantitative description of the swelling of smart microgels is still problematic in many cases. The original approach of Flory and Huggins for the monomer–solvent interaction parameter χ cannot be applied to some microgels. The reason for this obviously is that the cross-linking enhances the cooperativity of the volume phase transitions, since all meshes of the network are mechanically coupled. This was ignored in previous approaches, arguing with distinct transition temperatures for different meshes to describe the continuous character of the transition of microgels. Here, we adjust the swelling curves of a series of smart microgels using the Flory–Rehner description, where the polymer–solvent interaction parameter χ is modeled by a Hill-like equation for a cooperative thermotropic transition. This leads to a very good description of all measured microgel swelling curves and yields the physically meaningful Hill parameter ν. A linear decrease of ν is found with increasing concentration of the cross-linker N,N′-methylenebisacrylamide in the microgel particles p(NIPAM), p(NNPAM), and p(NIPMAM). The linearity suggests that the Hill parameter ν corresponds to the number of water molecules per network chain that cooperatively leave the chain at the volume phase transition. Driven by entropy, ν water molecules of the solvate become cooperatively “free” and leave the polymer network.

Smart membranes by electron beam cross-linking of copolymer microgels

Poly(N-isopropylacrylamide) (pNIPAM) based copolymer microgels were used to create free-standing, transferable, thermoresponsive membranes. The microgels were synthesized by copolymerization of NIPAM with N-benzylhydrylacrylamide (NBHAM). Monolayers of these colloidal gels were subsequently cross-linked using an electron gun leading to the formation of a connected monolayer. Furthermore, the cross-linked microgel layer is detached from the supporting material by dissolving the substrate. These unique systems can be used as transferable, thermoresponsive coatings and as thermoresponsive membranes. As a proof of principle for the use of such membranes we studied the ion transport through them at different temperatures revealing drastic changes when the lower critical solution temperature of the copolymer microgels is reached.

Aescin - a natural soap for the formation of lipid nanodiscs with tunable size

The saponin β-aescin from the seed extract of the horse chestnut tree Aesculus hippocastanum has demonstrated a beneficial role in clinical therapy which is in part related to its strong interaction with biological membranes. In this context the present work investigates the self-assembly of nm-sized discoidal lipid nanoparticles composed of β-aescin and the phospholipid 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC). The discoidal lipid nanoparticles reassemble from small discs into larger discs, ribbons and finally stacks of sheets upon heating from gel-phase to fluid phase DMPC. The morphological transition of the lipid nano-particles is mainly triggered by the phospholipid phase state change. The final morphology depends on the phospholipid-to-saponin ratio and the actual temperature. The study is conducted by small-angle X-ray scattering (SAXS) and transmission (TEM) and freeze fracture electron microscopy (FFEM) are used to cover larger length scales. Two different models, representing a disc and ribbon-like shape are applied to the SAXS data, evaluating possible geometries and molecular mixing of the nano-particles. The stacked sheets are analysed by the Caillé theory.

UV cross-linked smart microgel membranes as free-standing diffusion barriers and nanoparticle bearing catalytic films

In this study we use poly(N-isopropylacrylamide) (PNIPAM) based copolymer microgels to create free-standing, transferable, thermoresponsive membranes. The microgels are synthesized by copolymerization of NIPAM with 2-hydroxy-4-(methacryloyloxy)–benzophenone (HMABP) and spin-coated on Si wafers. After subsequent cross-linking by UV-irradiation, the formed layers easily detach from the supporting material. We obtain free standing microgel membranes with lateral extensions of several millimetres and an average layer thickness of a few hundred nanometres. They can be transferred to other substrates. As one example for potential applications we investigate the temperature dependent ion transport through the membranes via resistance measurements revealing a sharp reversible increase in resistance when the lower critical solution temperature of the copolymer microgels is reached. In addition, prior to cross-linking, the microgels can be decorated with silver nanoparticles and cross-linked afterwards. Such free-standing nanoparticle hybrid membranes are then used as catalytic systems for the reduction of 4-nitrophenol, which is monitored by UV/Vis spectroscopy.

Cross-linkable microgels are synthesized by copolymerization of NIPAM with 2-hydroxy-4-(methacryloyloxy)–benzophenone (HMABP) and are subsequently UV-cross-linked to obtain smart membranes exhibiting switchable resistance.

Acrylamide precipitation polymerization in a continuous flow reactor: an in situ FTIR study reveals kinetics

In this work, we present a combination of a continuous flow reactor with in situ monitoring of the monomer conversion in a precipitation polymerization. The flow reactor is equipped with a preheating area for the synthesis of thermoresponsive microgels, based on N-isopropylacrylamide (NIPAM). The reaction progress is monitored with in situ FTIR spectroscopy. The monomer conversion at defined residence times is determined from absorbance spectra of the reaction solutions by linear combination with reference spectra of the stock solution and the purified microgel. The reconstruction of the spectra appears to be in good agreement with experimental data in the range of 1710 to 1530 cm− 1, in which prominent absorption bands are used as probes for the monomer and the polymer. With increasing residence time, we observed a decrease in intensity of the ν(C=C) vibration, originating from the monomer, while the ν(C=O) vibration is shifted to higher frequencies by polymerization. Differences between the determined inline conversion kinetics and offline growth kinetics, determined by photon correlation spectroscopy (PCS), are discussed in terms of diffusion and point to a crucial role of mixing in precipitation polymerizations.

Suzuki-Miyaura Cross-Coupling of Bromotryptophan Derivatives at Ambient Temperature

Mild reaction conditions are highly desirable for bio‐orthogonal side chain derivatizations of amino acids, peptides or proteins due to the sensitivity of these substrates. Transition metal catalysed cross‐couplings such as Suzuki–Miyaura reactions are highly versatile, but usually require unfavourable reaction conditions, in particular, when applied with aryl bromides. Ligand‐free solvent‐stabilised Pd‐nanoparticles represent an efficient and sustainable alternative to conventional phosphine‐based catalysts, because the cross‐coupling can be performed at considerably lower temperature. We report on the application of such a highly reactive heterogeneous catalyst for the Suzuki–Miyaura cross‐coupling of brominated tryptophan derivatives. The solvent‐stabilised Pd‐nanoparticles are even more efficient than the literature‐known ADHP‐Pd precatalyst. Interestingly, the latter also leads to the formation of quasi‐homogeneous Pd‐nanoparticles as the catalytic species. One advantage of our approach is the compatibility with aqueous and aerobic conditions at near‐ambient temperatures and short reaction times of only 2 h. The influence of different N^α‐protecting groups, boronic acids as well as the impact of different amino acid side chains in bromotryptophan‐containing peptides has been studied. Notably, a surprising acceleration of the catalysis was observed when palladium‐coordinating side chains were present in proximal positions.

Influence of Li-Salt on the Mesophases of Pluronic Block Copolymers in Ionic Liquid

We study the complex mixture of a polyethylene oxide-b-polypropylene oxide-b-polyethylene oxide triblock copolymer (Pluronic F127) with ionic liquid (IL) and Li-salt, which is potentially interesting as an electrolyte system with decoupled mechanical and ion-transport properties. Small-angle X-ray scattering (SAXS) and differential scanning calorimetry (DSC) are employed to scrutinize the phase structures and elucidate the ternary phase diagram. These data are combined with the ion diffusivities obtained by pulsed field gradient (PFG) nuclear magnetic resonance (NMR). Analyzing the partial ternary phase diagram of F127/LiTFSI/Pyr₁₄TFSI, hexagonal, lamellar, and micellar mesophases are identified, including two-phase coexistence regions. While the PPO block is immiscible with the liquid, and forms the backbone of the mesostructured aggregates, the PEO blocks are not well miscible with the IL. Poorly solvated, the latter may still crystallize. At a higher IL content, PEO is further solvated, but a major solvation effect occurs due to addition of Li-salt. Li ions promote solubilization of the PEO chains in the IL, since they coordinate to the PEO chains. This was identified as the mechanism of a transition of the mesostructures, with increasing Li-salt content changing from a hexagonal to a lamellar and further to a micellar phase. In summary, both, the amount of IL and its compatibility with the PEO block, the latter being controlled by the Li-salt amount, influence the compositions of the formed mesophases and the ion diffusion in their liquid regions.

Smart microgels investigated by super-resolution fluorescence microscopy: influence of the monomer structure on the particle morphology

In a recent publication [Bergmann et al. Phys. Chem. Chem. Phys., 2018, 20, 5074-5083] we presented a method which enables to investigate the morphology of microgels by superresolution fluorescence microscopy. Here, this method is applied to three microgel species, based on N-isopropylmethacrylamide (NIPMAM), N-n-propylacrylamide (NNPAM) and N-n-propylmethacrylamide (NNPMAM)) with 5, 7.5 and 10 mol% cross-linker, respectively. Super-resolution microscopy reveals differences of the network morphology of the synthesized particles showing the importance of the monomer structure.

Core-shell microgels as thermoresponsive carriers for catalytic palladium nanoparticles

Responsive core-shell microgels are promising systems for a stabilization of Pd nanoparticles and control of their catalytic activity. Here, poly-N-n-propylacrylamide (PNNPAM) was copolymerized with methacrylic acid to yield microgel core particles, which were subsequently coated with an additional, acid-free poly-N-isopropylmethacrylamide (PNIPMAM) shell. Both core and core-shell systems were used as pH- and temperature-responsive carrier systems for the incorporation of palladium nanoparticles. The embedded nanoparticles were found to have a uniform size distribution with diameters at around 20 nm. Their catalytic activity was investigated by following the kinetics of the reduction of p-nitrophenol to p-aminophenol using UV-vis spectroscopy. For the PNNPAM microgel core, the temperature dependence of the rate constant followed the Arrhenius equation, which is an unusual behaviour for thermoresponsive carrier systems but common for passive systems such as polyelectrolyte brushes. In contrast, the catalytic activity of nanoparticles embedded in microgel core-shell systems decreased drastically at the volume phase transition temperature (44 °C) of the PNIPMAM shell. Accordingly, a promising architecture of passive nanoparticle-carrying core and thermoresponsive shell was realized successfully.

Heating-Induced DMPC/Glycyrrhizin Bicelle-to-Vesicle Transition: A X-Ray Contrast Variation Study

In this study, we investigated the conversion of lipid bicelles into vesicles in the case of a system composed of the phospholipid 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and the saponin glycyrrhizin in the presence of sucrose. Glycyrrhizin is a biosurfactant present in the licorice root and possesses a triterpenic hydrophobic backbone and a hydrophilic headgroup built from two sugar molecules. The aim of this study is to determine the initial bicelle size at temperatures below the lipid's main phase transition temperature T_m and, based on these results, characteristics of the temperature-induced bicelle-to-vesicle transition. Moreover, the influence of the heating rate on this transition is followed. The general picture concluded from photon correlation spectroscopy and small angle X-ray scattering was confirmed by additional imaging with cryogenic transmission electron microscopy. Small angle X-ray scattering was especially used to determine size parameters of the existing structures. To enhance the contrast for X-rays, a buffer containing 25 wt% sucrose was used. It was found that larger vesicles were formed from smaller precursor particles and that monodisperse precursors are required for formation of very monodisperse vesicles upon temperature increase. At high glycyrrhizin contents and above a critical heating rate of ∼5°C min^-1, the polydispersity of these vesicles is decoupled from both parameters, glycyrrhizin content and heating rate. However, the vesicle size stays tunable by the glycyrrhizin content and increases upon increasing the glycyrrhizin concentration. Therefore, vesicles of defined size and with a rather low polydispersity of ∼12-14% can be formed.

Recent advances in stimuli-responsive core-shell microgel particles: synthesis, characterisation, and applications

Inspired by the path followed by Matthias Ballauff over the past 20 years, the development of thermosensitive core-shell microgel structures is reviewed. Different chemical structures, from hard nanoparticle cores to double stimuli-responsive microgels have been devised and successfully implemented by many different groups. Some of the rich variety of these systems is presented, as well as some recent progress in structural analysis of such microstructures by small-angle scattering of neutrons or X-rays, including modelling approaches. In the last part, again following early work by the group of Matthias Ballauff, applications with particular emphasis on incorporation of catalytic nanoparticles inside core-shell structures—stabilising the nanoparticles and granting external control over activity—will be discussed, as well as core-shell microgels at interfaces.

Contrast variation SANS measurement of shell monomer density profiles of smart core-shell microgels

The radial density profile of deuterated poly(N,n-propyl acrylamide) shell monomers within core-shell microgels has been studied by small-angle neutron scattering in order to shed light on the origin of their linear thermally-induced swelling. The poly(N-isopropyl methacrylamide) core monomers have been contrast-matched by the H2O/D2O solvent mixture, and the intensity thus provides a direct measurement of the spatial distribution of the shell monomers. Straightforward modelling shows that their structure does not correspond to the expected picture of a well-defined external shell. A multi-shell model solved by a reverse Monte Carlo approach is then applied to extract the monomer density as a function of temperature and of the core crosslinking. It is found that most shell monomers fill the core at high temperatures approaching synthesis conditions of collapsed particles, forming only a dilute corona. As the core monomers tend to swell at lower temperatures, a skeleton of insoluble shell monomers hinders swelling, inducing the progressive linear thermoresponse.

Resolving the internal morphology of core-shell microgels with super-resolution fluorescence microscopy

We investigate the internal morphology of smart core-shell microgels by super-resolution fluorescence microscopy exploiting a combination of 3D single molecule localization and structured illumination microscopy utilizing freely diffusing fluorescent dyes. This approach does not require any direct chemical labeling and does not perturb the network structure of these colloidal gels. Hence, it allows us to study the morphology of the particles with very high precision. We found that the structure of the core-forming seed particles is drastically changed by the second synthesis step necessary for making the shell, resulting in a core region with highly increased dye localization density. The present work shows that super-resolution microscopy has great potential with respect to the study of soft colloidal systems.

The Biosurfactant β-Aescin: A Review on the Physico-Chemical Properties and Its Interaction with Lipid Model Membranes and Langmuir Monolayers

This review discusses recent progress in physicochemical understanding of the action of the saponin β-aescin (also called β-escin), the biologically active component in the seeds of the horse chestnut tree Aesculus hippocastanum. β-Aescin is used in pharmacological and cosmetic applications showing strong surface activity. In this review, we outline the most important findings describing the behavior of β-aescin in solution (e.g., critical micelle concentration (cmc) and micelle shape) and special physicochemical properties of adsorbed β-aescin monolayers at the air–water and oil–water interface. Such monolayers were found to posses very special viscoelastic properties. The presentation of the experimental findings is complemented by discussing recent molecular dynamics simulations. These simulations do not only quantify the predominant interactions in adsorbed monolayers but also highlight the different behavior of neutral and ionized β-aescin molecules. The review concludes on the interaction of β-aescin with phospholipid model membranes in the form of bilayers and Langmuir monolayers. The interaction of β-aescin with lipid bilayers was found to strongly depend on its cmc. At concentrations below the cmc, membrane parameters are modified whereas above the cmc, complete solubilization of the bilayers occurs, depending on lipid phase state and concentration. In the presence of gel-phase phospholipids, discoidal bicelles form; these are tunable in size by composition. The phase behavior of β-aescin with lipid membranes can also be modified by addition of other molecules such as cholesterol or drug molecules. The lipid phase state also determines the penetration rate of β-aescin molecules into lipid monolayers. The strongest interaction was always found in the presence of gel-phase phospholipid molecules.

Hydration and Solvent Exchange Induced Swelling and Deswelling of Homogeneous Poly(N-isopropylacrylamide) Microgel Thin Films

The investigation of the response kinetics of smart colloidal microgel films is crucial for their optimization to enable advanced applications. We study the classical thermoresponsive microgel model system N-isopropylacrylamide cross-linked with N,N'-methylenebisacrylamide. Without the typically used polyelectrolyte coating of the substrate, thin microgel films are prepared in a single spin-coating step. Atomic force microscopy measurements reveal an extremely dense packing, resulting in a homogeneous compact thin film of microgel particles. The hydration kinetics of these films in H₂O and D₂O atmospheres as well as the kinetics of the solvent exchange between both water species are investigated with in situ time-of-flight neutron reflectometry (TOF-NR) and in situ Fourier-transform infrared (FTIR) spectroscopy. With accounting for a nonconstant humid atmosphere, the intrinsic diffusion dynamics of water molecules into the thin microgel film are modeled and the specific time constant τ and the effective Flory-Huggins interaction parameter χ_eff are determined. Comparing the results in H₂O and D₂O atmospheres, TOF-NR and FTIR spectroscopy results show an increased affinity of the microgel films toward H₂O as compared to D₂O. From the FTIR spectroscopy data, we further identify different kinetics of intermolecular processes and order them according to their temporal evolution.

Aescin-Induced Conversion of Gel-Phase Lipid Membranes into Bicelle-like Lipid Nanoparticles

Mixtures of the phospholipid 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and the saponin β-aescin spontaneously form monodisperse, bilayered discoidal micelles (also known as "bicelles" or "nanodisks") in aqueous solution. Such bicelles form below the melting temperature of DMPC when the phospholipids are in the rigid L_β' state and are precursors of spontaneously formed vesicles. The aescin concentration must be far above the cmc_aescin (≈0.3-0.4 mM). It was found that the shape and size of the bicelles are tunable by composition. High amounts of aescin decrease the size of the bicelles from diameters of ∼300 Å at 7 mol % to ∼120 Å at 30 mol % β-aescin. The structures are scrutinized by complementary small-angle X-ray and neutron scattering experiments. The scattering curves are subsequently analyzed by a model-independent (indirect Fourier transform analysis) and a model-based approach where bicelles are described as polydisperse bilayer disks encircled by a β-aescin rim. Moreover, the monomodal distribution and low polydispersity of the samples were confirmed by photon correlation spectroscopy. The discoidal structures were visualized by transmission electron microscopy.

Spatial distribution of core monomers in acrylamide-based core-shell microgels with linear swelling behaviour

The peculiar linear temperature-dependent swelling of core-shell microgels has been conjectured to be linked to the core-shell architecture combining materials of different transition temperatures. Here the structure of pNIPMAM-core and pNNPAM-shell microgels in water is studied as a function of temperature using small-angle neutron scattering with selective deuteration. Photon correlation spectroscopy is used to scrutinize the swelling behaviour of the colloidal particles and reveals linear swelling. Moreover, these experiments are also employed to check the influence of deuteration on swelling. Using a form-free multi-shell reverse Monte Carlo approach, the small-angle scattering data are converted into radial monomer density profiles. The comparison of ‘core-only’ particles consisting of identical cores to fully hydrogenated core-shell microgels, and finally to H-core/D-shell architectures unambiguously shows that core and shell monomers display gradient profiles with strong interpenetration, leading to cores embedded in shells which are bigger than their isolated ‘core-only’ precursor particles. This surprising result is further generalized to different core cross-linker contents, for temperature ranges encompassing both transitions. Our analysis demonstrates that the internal structure of pNIPMAM-core and pNNPAM-shell microgels is heterogeneous and strongly interpenetrated, presumably allowing only progressive core swelling at temperatures intermediate to both transition temperatures, thus promoting linear swelling behaviour.

Synthesis of smart dual-responsive microgels: correlation between applied surfactants and obtained particle morphology

Thermo- and pH-responsive copolymer microgels were obtained by surfactant-assisted precipitation polymerization of N-isopropylacrylamide (NIPAM) and acrylic acid (AAc). The surfactants used were sodium dodecylsulfate (SDS), dodecyltrimethylammonium bromide (DTAB) and the nonionic n-octyl-β-d-glucopyranoside (C8G1). We investigate the influence of the surfactants on the acrylic acid incorporation rate, the particle size, particle morphology, and the swelling behaviour at pH 4 and pH 7, at which AAc is neutral or charged, respectively. It is shown that each surfactant has a specific influence, which is connected to its role in the polymerization mechanism and its charge. A combined FTIR and PCS study reveals that the particles undergo a temperature-induced change in microstructure, even if the particle hydrodynamic radius does not change significantly.

Nanogels and Microgels: From Model Colloids to Applications, Recent Developments, and Future Trends

Nanogels and microgels are soft, deformable, and penetrable objects with an internal gel-like structure that is swollen by the dispersing solvent. Their softness and the potential to respond to external stimuli like temperature, pressure, pH, ionic strength, and different analytes make them interesting as soft model systems in fundamental research as well as for a broad range of applications, in particular in the field of biological applications. Recent tremendous developments in their synthesis open access to systems with complex architectures and compositions allowing for tailoring microgels with specific properties. At the same time state-of-the-art theoretical and simulation approaches offer deeper understanding of the behavior and structure of nano- and microgels under external influences and confinement at interfaces or at high volume fractions. Developments in the experimental analysis of nano- and microgels have become particularly important for structural investigations covering a broad range of length scales relevant to the internal structure, the overall size and shape, and interparticle interactions in concentrated samples. Here we provide an overview of the state-of-the-art, recent developments as well as emerging trends in the field of nano- and microgels. The following aspects build the focus of our discussion: tailoring (multi)functionality through synthesis; the role in biological and biomedical applications; the structure and properties as a model system, e.g., for densely packed arrangements in bulk and at interfaces; as well as the theory and computer simulation.

Arguments for an additional long-lived intermediate in the photocycle of the full-length aureochrome 1c receptor: A time-resolved small-angle X-ray scattering study

Aureochromes (AUREO) act as blue-light photoreceptors in algae. They consist of a light-, oxygen-, voltage-sensitive (LOV) domain and a DNA-binding basic region/leucine zipper. Illumination of the flavin cofactor in LOV leads to the formation of an adduct, followed by global structural changes. Here, we first applied UV/vis spectroscopy to characterize the photocycle of full-length aureochrome 1c (PtAUREO1c) from the diatom Phaeodactylum tricornutum. With a time constant of 850 s and a quantum yield of 23%, PtAUREO1c reveals a faster recovery time and a much lower sensitivity toward light than PtAUREO1a, pointing to its role as a high light sensor in vivo. UV/vis spectroscopy offers details on the local recovery of the flavin chromophore. However, kinetic information on the global structural recovery of full-length AUREO or any other multidomain LOV protein is missing. This information is essential not least for the photoreceptors' applications as optogenetic devices. Therefore, we established a procedure to apply small-angle X-ray scattering on PtAUREO1c in a time-resolved manner employing an in-house setup. In combination with UV/vis spectroscopy under similar conditions, we revealed a discrepancy between the recovery of the global protein structure and the adduct lifetime. Accordingly, we propose to supplement the photocycle by an intermediate state (I447), which decays with a time constant of about 800 s and prolongs the lifetime of the signaling state.

Improved Smart Microgel Carriers for Catalytic Silver Nanoparticles

Acrylamide-based, thermoresponsive core-shell microgels with a linear phase transition region are used as improved carriers for catalytically active silver nanoparticles in the present study. In this context, we investigated the swelling behavior of the carriers and the stability of the silver nanoparticles inside the polymer network with photon correlation spectroscopy, transmission electron microscopy, and by following the surface plasmon resonance of the nanoparticles. Depending on the cross-linker content of the microgel core, we observed very good stability of the nanoparticles inside the microgel network, with nearly no bleeding or aggregation of the nanoparticles over several weeks for core cross-linker contents of 5 and 10 mol %. The architecture of the hybrid particles in the swollen state was investigated with cryogenic transmission electron microscopy. The particles exhibit a core-shell structure, with the silver nanoparticles located mainly at the interface between the core and shell. This architecture was not used before and seems to grant advanced stability to the nanoparticles inside the network in combination with good switchability of the catalytic activity. This was measured by following the reduction of 4-nitrophenole, which is a well-studied model reaction. The obtained Arrhenius plots show that similar to previous works, the swelling of the core and shell can influence the catalytic activity of the silver nanoparticles. As mentioned before, the cross-linker content of the core seems to be a very important parameter for the switchability of the catalytic activity. A higher cross-linker content of the core seems to be connected to a stronger influence of the carrier swelling degree on the catalytic activity of the silver nanoparticles.

Dynamics of proteins confined in non-ionic bicontinuous microemulsions: a FCS study

In our present work we present an approach which allows one to confine proteins in structurally nearly identical bicontinuous microemulsions with systematically decreasing water domain size. It is shown that sub-diffusive behaviour occurs already at water domain sizes below 13 nm. However, above 13 nm normal diffusion is seen. Moreover, we compare protein diffusion in microemulsions to the transport of a much smaller fluorescent dye.

Shear-Induced Transformation of Polymer-Rich Lamellar Phases to Micron-Sized Vesicles

In the present work, we study the shear-induced transformation of polymer-rich lamellar phases into vesicles. The evolution of vesicle size is studied by different scattering techniques, rheology, and microscopy methods. The lamellar phase found in the system D₂O/ o-xylene/ Pluronic PE9400/C₈TAB can be fully transformed to multilamellar vesicles (MLVs) by applying shear. The size of the MLVs is proportional to the inverse square root of the shear rate. Hence, the polymer-based quaternary system behaves similar to lamellar phases based on small surfactant molecules. Additionally, we found a growth effect leading to a size increase of the vesicles after shearing was stopped.

Temperature dependent self-organization of DMPC membranes promoted by intermediate amounts of the saponin aescin

The plant-derived biosurfactant aescin is naturally present in many plants and is used for treatment of disorders such as varicose veins and inflammation of veins. The hemolytic activity of this saponin is attributed to its interaction with cholesterol in the red blood cell membrane. This work investigates the phase and aggregation behavior of saponin-containing model membranes consisting of the phospholipid 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC). The aescin concentrations studied range from 1 mol% to 7 mol% with respect to the total lipid content. The methods of choice to elucidate the structural picture are small-angle scattering of X-rays (SAXS) and neutrons (SANS) and cryogenic transmission electron microscopy (cryo-TEM). SANS and SAXS revealed that at lower aescin contents vesicular structures are conserved and vesicles tend to aggregate already at aescin contents of around 1 mol%. Aggregation and vesicle deformation effects are found to be stronger when the phospholipids are in the L [Formula: see text] phase. With increasing aescin content, mixed structures, i.e. aggregated and deformed vesicles and solubilized bilayer fragments, are present. This was proven for a sample with 4 mol% aescin by cryo-TEM. An increasing aescin amount leads to membrane decomposition and free standing bilayers which tend to build stacks at high temperature. These stacks are characterized by SAXS using the modified Caillé theory. Analyses and model dependent fitting reveal formation of well-defined structures beginning at 7 mol% aescin.

Swelling behaviour of core–shell microgels in H2O, analysed by temperature-dependent FTIR spectroscopy

The structural basis for linear thermoresponses of smart core–shell microgels is elucidated by FTIR spectroscopy, being sensitive to core processes.

Determination of Internal Density Profiles of Smart Acrylamide-Based Microgels by Small-Angle Neutron Scattering: A Multishell Reverse Monte Carlo Approach

The internal structure of nanometric microgels in water has been studied as a function of temperature, cross-linker content, and level of deuteration. Small-angle neutron scattering from poly( N-isopropylmethacrylamide) (volume phase transition ≈ 44 °C) microgel particles of radius well below 100 nm in D₂O has been measured. The intensities have been analyzed with a combination of polymer chain scattering and form-free radial monomer volume fraction profiles defined over spherical shells, taking polydispersity in size of the particles determined by atomic force microscopy into account. A reverse Monte Carlo optimization using a limited number of parameters was developed to obtain smoothly decaying profiles in agreement with the experimentally scattered intensities. The results are compared to the swelling curve of microgel particles in the temperature range from 15 to 55 °C obtained from photon correlation spectroscopy (PCS). In addition to hydrodynamic radii measured by PCS, our analysis provides direct information about the internal water content and gradients, the strongly varying steepness of the density profile at the particle-water interface, the total spatial extension of the particles, and the visibility of chains. The model has also been applied to a variation of the cross-linker content, N, N'-methylenebisacrylamide, from 5 to 15 mol %, providing insight on the impact of chain architecture and cross-linking on water uptake and on the definition of the polymer-water interface. The model can easily be generalized to arbitrary monomer contents and types, in particular mixtures of hydrogenated and deuterated species, paving the way to detailed studies of monomer distributions inside more complex microgels, in particular core-shell particles.

Smart Starch-Poly( N-isopropylacrylamide) Hybrid Microgels: Synthesis, Structure, and Swelling Behavior

In this study, we present hybrid microgels made of starch nanoparticles (SNPs) and poly( N-isopropylacrylamide) [p(NIPAM)]. SNPs were formed through nanoprecipitation. Hybrid microgels were prepared by surfactant-free precipitation polymerization (SFPP) or in the presence of surfactant precipitation polymerization (PP) at different NIPAM/SNP ratios. Dynamic light scattering results of hybrid microgels synthesized by SFPP revealed changes in volume phase transition temperature according to SNP amount, where the increase in the hydrophilic content caused small shifts in the lower critical solution temperature (LCST), reaching nearly 35 °C. Colloidal stability was improved with the SNP content, leading to increased stability because of the hydroxyl groups. Small-angle X-ray scattering indicates a core-shell structure above the LCST, where SNPs chains cover a p(NIPAM) core. Swelling curves experimentally obtained were analyzed using the Flory-Rehner model, where the interaction parameter (χ) has been modeled either by a series expansion of the swelling ratio or by a Hill-like equation for a cooperative thermotropic transition.