Coordinative Stabilization of Single Bismuth Sites in a Carbon-Nitrogen Matrix to Generate Atom-Efficient Catalysts for Electrochemical Nitrate Reduction to Ammonia

Electrochemical nitrate reduction to ammonia powered by renewable electricity is not only a promising alternative to the established energy-intense and non-ecofriendly Haber-Bosch reaction for ammonia generation but also a future contributor to the ever-more important denitrification schemes. Nevertheless, this reaction is still impeded by the lack of understanding for the underlying reaction mechanism on the molecular scale which is necessary for the rational design of active, selective, and stable electrocatalysts. Herein, a novel single-site bismuth catalyst (Bi-N-C) for nitrate electroreduction is reported to produce ammonia with maximum Faradaic efficiency of 88.7% and at a high rate of 1.38 mg h-1 mgcat -1 at -0.35 V versus reversible hydrogen electrode (RHE). The active center (described as BiN2 C2 ) is uncovered by detailed structural analysis. Coupled density functional theory calculations are applied to analyze the reaction mechanism and potential rate-limiting steps for nitrate reduction based on the BiN2 C2 model. The findings highlight the importance of model catalysts to utilize the potential of nitrate reduction as a new-generation nitrogen-management technology based on the construction of efficient active sites.

Electron Ptychographic Phase Imaging of Beam-sensitive All-inorganic Halide Perovskites Using Four-dimensional Scanning Transmission Electron Microscopy

Halide perovskites (HPs) are promising candidates for optoelectronic devices, such as solar cells or light-emitting diodes. Despite recent progress in performance optimization and low-cost manufacturing, their commercialization remains hindered due to structural instabilities. While essential to the development of the technology, the relation between the microscopic properties of HPs and the relevant degradation mechanisms is still not well understood. The sensitivity of HPs toward electron-beam irradiation poses significant challenges for transmission electron microscopy (TEM) investigations of structure and degradation mechanisms at the atomic scale. However, technological advances and the development of direct electron cameras (DECs) have opened up a completely new field of electron microscopy: four-dimensional scanning TEM (4D-STEM). From a 4D-STEM dataset, it is possible to extract not only the intensity signal for any STEM detector geometry but also the phase information of the specimen. This work aims to show the potential of 4D-STEM, in particular, electron exit-wave phase reconstructions via focused probe ptychography as a low-dose and dose-efficient technique to image the atomic structure of beam-sensitive HPs. The damage mechanism under conventional irradiation is described and atomically resolved almost aberration-free phase images of three all-inorganic HPs, CsPbBr3, CsPbIBr2, and CsPbI3, are presented with a resolution down to the aperture-constrained diffraction limit.

Superconductivity at Interfaces in Cuprate-Manganite Superlattices

One of the unsolved problems for using high-T_c superconducting cuprates for spintronic applications are the short coherence lengths of Cooper pairs in oxides (a few Å), which requires atomically sharp and defect-free interfaces. This research demonstrates the presence of high-T_c superconducting La_1.84 Sr_0.16 CuO₄ in direct proximity to SrLaMnO₄ and provides evidence for the sharpness of interfaces between the cuprate and the manganite layers at the atomic scale. These findings shed light on the impact of the chemical potential at the interface of distinct materials on highly sensitive physical properties, such as superconductivity. Additionally, this results show the high stability of ultrathin layers from the same K₂ NiF₄ -type family, specifically one unit cell of Sr_{2- x} La_x MnO₄ and three unit cells of La_1.84 Sr_0.16 CuO₄ . This work advances both the fundamental understanding of the proximity region between superconducting cuprates and manganite phases and the potential use of oxide-based materials in quantum computing.

Electrochemical Generation of Catalytically Active Edge Sites in C2 N-Type Carbon Materials for Artificial Nitrogen Fixation

The electrochemical nitrogen reduction reaction (NRR) to ammonia (NH₃ ) is a potentially carbon-neutral and decentralized supplement to the established Haber-Bosch process. Catalytic activation of the highly stable dinitrogen molecules remains a great challenge. Especially metal-free nitrogen-doped carbon catalysts do not often reach the desired selectivity and ammonia production rates due to their low concentration of NRR active sites and possible instability of heteroatoms under electrochemical potential, which can even contribute to false positive results. In this context, the electrochemical activation of nitrogen-doped carbon electrocatalysts is an attractive, but not yet established method to create NRR catalytic sites. Herein, a metal-free C₂ N material (HAT-700) is electrochemically etched prior to application in NRR to form active edge-sites originating from the removal of terminal nitrile groups. Resulting activated metal-free HAT-700-A shows remarkable catalytic activity in electrochemical nitrogen fixation with a maximum Faradaic efficiency of 11.4% and NH₃ yield of 5.86 µg mg^-1 _cat h^-1 . Experimental results and theoretical calculations are combined, and it is proposed that carbon radicals formed during activation together with adjacent pyridinic nitrogen atoms play a crucial role in nitrogen adsorption and activation. The results demonstrate the possibility to create catalytically active sites on purpose by etching labile functional groups prior to NRR.

Mn(II) sub-nanometric site stabilization in noble, N-doped carbonaceous materials for electrochemical CO2 reduction

The preparation of stable and efficient electrocatalysts comprising abundant and non-critical row-materials is of paramount importance for their industrial implementation. Herein, we present a simple synthetic route to prepare Mn(II) sub-nanometric active sites over a highly N-doped noble carbonaceous support. This support not only promotes a strong stabilization of the Mn(II) sites, improving its stability against oxidation, but also provides a convenient coordination environment in the Mn(II) sites able to produce CO, HCOOH and CH₃COOH from electrochemical CO₂ reduction.

Light-driven directional ion transport for enhanced osmotic energy harvesting

Light-driven ion (proton) transport is a crucial process both for photosynthesis of green plants and solar energy harvesting of some archaea. Here, we describe use of a TiO₂/C₃N₄ semiconductor heterojunction nanotube membrane to realize similar light-driven directional ion transport performance to that of biological systems. This heterojunction system can be fabricated by two simple deposition steps. Under unilateral illumination, the TiO₂/C₃N₄ heterojunction nanotube membrane can generate a photocurrent of about 9 μA/cm², corresponding to a pumping stream of ∼5500 ions per second per nanotube. By changing the position of TiO₂ and C₃N₄, a reverse equivalent ionic current can also be realized. Directional transport of photogenerated electrons and holes results in a transmembrane potential, which is the basis of the light-driven ion transport phenomenon. As a proof of concept, we also show that this system can be used for enhanced osmotic energy generation. The artificial light-driven ion transport system proposed here offers a further step forward on the roadmap for development of ionic photoelectric conversion and integration into other applications, for example water desalination.

Chemical Vapor Deposition of Highly Conjugated, Transparent Boron Carbon Nitride Thin Films

Ternary materials made up only from the lightweight elements boron, carbon, and nitrogen are very attractive due to their tunable properties that can be obtained by changing the relative elemental composition. However, most of the times, the synthesis requires to use up to three different precursor and very high temperatures for the synthesis. Moreover, the low reciprocal solubility of boron nitride and graphene often leads to BN-C composite materials due to phase segregation. Herein, an innovative method is presented to prepare BCN thin films by chemical vapor deposition from a single source precursor, melamine diborate. The deposition occurs homogenously at relatively low temperatures generating very high degree of sp2 conjugation. The as-prepared thin films possess high transparency and refractive index values in the visible range that are of interest for reflective mirrors and lenses. Furthermore, they are wide-bandgap semiconductor with very positive valence band, making these materials very stable against oxidation of interest as protective coating and charge transport layer for solar cells. The simple chemical vapor deposition method that relies on commonly available and low-hazard precursor can open the way for application of BCN thin films in optics, optoelectronics, and beyond.

Ultrahigh water sorption on highly nitrogen doped carbonaceous materials derived from uric acid

HYPOTHESIS

Developing materials for thermally driven adsorption chillers and adsorption heat pumps is a growing research field due to the potential of these technologies to address up to 50% of the world's total energy demand. These materials must be abundant, easy to synthesize, hydrophilic, and low in cost. Bare carbon materials are hydrophobic and therefore usually not considered for these applications. However, by introducing heteroatoms and tuning their porosity, the hydrophilicity of carbonaceous networks can be increased significantly.

EXPERIMENTAL

Herein, a series of highly nitrogen doped carbonaceous materials (CNs) have been synthesized by submitting uric acid to heat treatment at different temperatures in the presence of an inorganic salt mix as solvent and pore template. The effect of the thermal treatment on the materials composition, pore network, and water sorption capability has been studied.

FINDINGS

At 800 °C, a nitrogen depleted carbonaceous material with a maximal water uptake of 1.38g_H2O g^-1 is obtained. Condensation at 750 °C creates an ultra-hydrophilic CN with a water uptake of 0.8 g_H2O g^-1 at already much lower partial pressures. While the maximum uptake is mainly ascribed to the mesopore volume of the material, the differences in hydrophilicity can be controlled by functionality.

Laser-driven growth of structurally defined transition metal oxide nanocrystals on carbon nitride photoelectrodes in milliseconds

Fabrication of hybrid photoelectrodes on a subsecond timescale with low energy consumption and possessing high photocurrent densities remains a centerpiece for successful implementation of photoelectrocatalytic synthesis of fuels and value-added chemicals. Here, we introduce a laser-driven technology to print sensitizers with desired morphologies and layer thickness onto different substrates, such as glass, carbon, or carbon nitride (CN). The specially designed process uses a thin polymer reactor impregnated with transition metal salts, confining the growth of transition metal oxide (TMO) nanostructures on the interface in milliseconds, while their morphology can be tuned by the laser. Multiple nano-p-n junctions at the interface increase the electron/hole lifetime by efficient charge trapping. A hybrid copper oxide/CN photoanode with optimal architecture reaches 10 times higher photocurrents than the pristine CN photoanode. This technology provides a modular approach to build a library of TMO-based composite films, enabling the creation of materials for diverse applications.

Enhanced Organic Photocatalysis in Confined Flow through a Carbon Nitride Nanotube Membrane with Conversions in the Millisecond Regime

Bioinspired nanoconfined catalysis has developed to become an important tool for improving the performance of a wide range of chemical reactions. However, photocatalysis in a nanoconfined environment remains largely unexplored. Here, we report the application of a free-standing and flow-through carbon nitride nanotube (CNN) membrane with pore diameters of 40 nm for confined photocatalytic reactions where reactants are in contact with the catalyst for <65 ms, as calculated from the flow. Due to the well-defined tubular structure of the membrane, we are able to assess quantitatively the photocatalytic performance in each of the parallelized single carbon nitride nanotubes, which act as spatially isolated nanoreactors. In oxidation of benzylamine, the confined reaction shows an improved performance when compared to the corresponding bulk reaction, reaching a turnover frequency of (9.63 ± 1.87) × 10⁵ s^-1. Such high rates are otherwise only known for special enzymes and are clearly attributed to the confinement of the studied reactions within the one-dimensional nanochannels of the CNN membrane. Namely, a concave surface maintains the internal electric field induced by the polar surface of the carbon nitride inside the nanotube, which is essential for polarization of reagent molecules and extension of the lifetime of the photogenerated charge carriers. The enhanced flow rate upon confinement provides crucial insight on catalysis in such an environment from a physical chemistry perspective. This confinement strategy is envisioned not only to realize highly efficient reactions but also to gain a fundamental understanding of complex chemical processes.

Guanine-Derived Porous Carbonaceous Materials: Towards C1 N1

Herein, the basic nature of noble covalent, sp2-conjugated materials prepared via direct condensation of guanine in the presence of an inorganic salt melt as structure directing agent was studied. At temperatures below 700 °C stable and more basic addition products with at C/N ratio of 1 (C1 N1 adducts) and with rather uniform micropore sizes were formed. Carbonization at higher temperatures broke the structural motif, and N-doped carbons with 11 wt % and surface areas of 1900 m2  g-1 were obtained. The capability for CO2 sorption and catalytic activity of the materials depended of both their basicity and their pore morphology. The optimization of the synthetic parameters led to very active (100 % conversion) and highly selective (99 % selectivity) heterogeneous base catalysts, as exemplified with the model Knoevenagel condensation of benzaldehyde with malononitrile. The high stability upon oxidation of these covalent materials and their basicity open new perspectives in heterogeneous organocatalysis.

Boron Carbon Nitride Thin Films: From Disordered to Ordered Conjugated Ternary Materials

We present an innovative method for the synthesis of boron carbon nitride thin film materials in a simple furnace setup, using commonly available solid precursors and relatively low temperature compared to previous attempts. The as-prepared structural and optical properties of thin films are tuned via the precursor content, leading to a sp²-conjugated boron nitride–carbon nitride mixed material, instead of the commonly reported boron nitride–graphene phase segregation, with tunable optical properties such as band gap and fluorescence.

Magnetite-Arginine Nanoparticles as a Multifunctional Biomedical Tool

Iron oxide nanoparticles are a promising platform for biomedical applications, both in terms of diagnostics and therapeutics. In addition, arginine-rich polypeptides are known to penetrate across cell membranes. Here, we thus introduce a system based on magnetite nanoparticles and the polypeptide poly-l-arginine (polyR-Fe₃O₄). We show that the hybrid nanoparticles exhibit a low cytotoxicity that is comparable to Resovist^®, a commercially available drug. PolyR-Fe₃O₄ particles perform very well in diagnostic applications, such as magnetic particle imaging (1.7 and 1.35 higher signal respectively for the 3rd and 11th harmonic when compared to Resovist^®), or as contrast agents for magnetic resonance imaging (R2/R1 ratio of 17 as compared to 11 at 0.94 T for Resovist^®). Moreover, these novel particles can also be used for therapeutic purposes such as hyperthermia, achieving a specific heating power ratio of 208 W/g as compared to 83 W/g for Feridex^®, another commercially available product. Therefore, we envision such materials to play a role in the future theranostic applications, where the arginine ability to deliver cargo into the cell can be coupled to the magnetite imaging properties and cancer fighting activity.

A Single Cu-Center Containing Enzyme-Mimic Enabling Full Photosynthesis under CO2 Reduction

Polymeric carbon nitride (CN) is one of the most promising metal-free photocatalysts to alleviate the energy crisis and environmental pollution. Loading cocatalysts is regarded as an effective way to improve the photocatalytic efficiency of CNs. However, commonly used noble metal cocatalysts limit their applications due to their rarity and high cost. Herein, we present the effective synthesis of single-atom copper-modified CN via supramolecular preorganization with subsequent condensation, which provides effective charge transfer pathways by an "infused" delocalized state with variable-valence catalysis at the same time. The C-Cu-N₂ single-atom catalytic site can activate CO₂ molecules and reduces the energy barrier toward photocatalytic CO₂ reduction. Excellent performance for photocatalytic CO₂ reduction was found. This work thereby provides a general protocol of designing a noble-metal-free photocatalyst with infused metal centers toward a wide range of applications.

Anti-BP180 autoantibody levels at diagnosis correlate with 1-year mortality rates in patients with bullous pemphigoid

BACKGROUND

Bullous pemphigoid (BP) is the most frequent autoimmune blistering disease mainly affecting elderly patients. Among several published risk factors, a recent post hoc analysis linked anti-BP180 autoantibodies (AABs) to fatal outcomes in BP. To date, this finding has not been confirmed independently.

OBJECTIVE

To investigate the potential of anti-BP180-AAB levels as a marker of prognosis and to identify a cut-off level indicative of an increased risk for early death. Secondly, to characterize parameters associated with mortality.

METHODS

Retrospective, single-centre study of BP patients diagnosed between 2001 and 2012. Analyses included epidemiological and patient- and disease-specific characteristics as well as immunological parameters at diagnosis and during follow-up. Standardized mortality ratios as well as uni- and multivariate regression analyses were calculated.

RESULTS

One hundred patients (56 women, 44 men) with a median age of 81 years (interquartile range 74-86) were followed up for a median of 775 days (interquartile range 162-1617). One-year mortality rates were 25.0% implying a 2.4-fold increased risk of death compared with the general population. High anti-BP180 autoantibody levels at diagnosis (CI₉₅ 1.30-2.89; P = 0.001), dementia (CI₉₅ 1.13-6.72; P =0.03), length of hospitalization (CI₉₅ 1.16-2.41; P = 0.01) and age (CI₉₅ 1.23-4.19; P = 0.009) correlated significantly with 1-year mortality. BP180-AAB concentrations of ≥61 U/mL characterized a subgroup of patients with a particular higher risk for early death compared with the general population (CI₉₅ 1.81-3.81; P < 0.0001).

CONCLUSION

In bullous pemphigoid, serum concentrations of BP180 autoantibodies at diagnosis could help to identify patients at risk for death within the first year after diagnosis (cut-off value 61 U/mL).

Synthesis of a Porous C3N-Derived Framework with High Yield by Gallic Acid Cross-Linking Using Salt Melts

Porous carbon/nitrogen frameworks are an emerging class of noble organic materials with a wide range of potential applications. However, the design and controlled synthesis of those materials are still a challenge. Herein, we present the rational design of such a system with high microporosity, specific surface areas of up to 946 m² g^-1, and excellent condensation yields. The obtained noble frameworks were used for the delivery of larger organic molecules and changed the melting behavior of some daily drug molecules along their highly polarizable surfaces.

Shine Bright Like a Diamond: New Light on an Old Polymeric Semiconductor

Brilliance usually refers to the light reflected by the facets of a gemstone such as diamond due to its high refractive index. Nowadays, high-refractive-index materials find application in many optical and photonic devices and are mostly of inorganic nature. However, these materials are usually obtained by toxic or expensive production processes. Herein, the synthesis of a thin-film organic semiconductor, namely, polymeric carbon nitride, by thermal chemical vapor deposition is presented. Among polymers, this organic material combines the highest intrinsic refractive index reported so far with high transparency in the visible spectrum, even reaching the range of diamond. Eventually, the herein presented deposition of high quality thin films and their optical characteristics open the way for numerous new applications and devices in optics, photonics, and beyond based on organic materials.

Electron Deficient Monomers that Optimize Nucleation and Enhance the Photocatalytic Redox Activity of Carbon Nitrides

Polymeric carbon nitride (PCN) is usually synthesized from nitrogen‐rich monomers such as cyanamide, melamine, and urea, but is rather disordered in many cases. Now, a new allotrope of carbon nitride with internal heterostructures was obtained by co‐condensation of very electron poor monomers (for example, 5‐amino‐tetrazole and nucleobases) in the presence of mild molten salts (for example, NaCl/KCl) to mediate the polymerization kinetics and thus modulate the local structure, charge carrier properties, and most importantly the HOMO and LUMO levels. Results reveal that the as‐prepared NaK‐PHI‐A material shows excellent photo‐redox activities because of a nanometric hetero‐structure which enhances visible light absorption and promotes charge separation in the different domains.

Photo-Driven Ion Transport for a Photodetector Based on an Asymmetric Carbon Nitride Nanotube Membrane

Conventional photosensing devices work mainly by electron processing and transport, while visual systems in intelligence work by integrative ion/electron signals. To realize smarter photodetectors, some photoionic device or the combination of ionic and electronic devices are necessary. Now, an ion-transport-based self-powered photodetector is presented based on an asymmetric carbon nitride nanotube membrane, which can realize fast, selective, and stable light detection while being self-powered. Local charges are continuously generated at the irradiated side of the membrane, and none (fewer) at the non-irradiated side. The resulting surface charge gradient in carbon nitride nanotube will drive ion transport in the cavity, thus realizing the function of ionic photodetector. With advantages of low cost and easy fabrication process, the concept of ionic photodetectors based on carbon nitride anticipates wide applications for semiconductor biointerfaces.

Patching laser-reduced graphene oxide with carbon nanodots

Three-dimensional graphenes are versatile materials for a range of electronic applications and considered among the most promising candidates for electrodes in future electric double layer capacitors (EDLCs) as they are expected to outperform commercially used activated carbon. Parameters such as electrical conductivity and active surface area are critical to the final device performance. By adding carbon nanodots to graphene oxide in the starting material for our standard laser-assisted reduction process, the structural integrity (i.e. lower defect density) of the final 3D-graphene is improved. As a result, the active surface area in the hybrid starting materials was increased by 130% and the electrical conductivity enhanced by nearly an order of magnitude compared to pure laser-reduced graphene oxide. These improved material parameters lead to enhanced device performance of the EDLC electrodes. The frequency response, i.e. the minimum phase angle and the relaxation time, were significantly improved from -82.2° and 128 ms to -84.3° and 7.6 ms, respectively. For the same devices the specific gravimetric device capacitance was increased from 110 to a maximum value of 214 F g^-1 at a scan rate of 10 mV s^-1.

Artificial light-driven ion pump for photoelectric energy conversion

Biological light-driven ion pumps move ions against a concentration gradient to create a membrane potential, thus converting sunlight energy directly into an osmotic potential. Here, we describe an artificial light-driven ion pump system in which a carbon nitride nanotube membrane can drive ions thermodynamically uphill against an up to 5000-fold concentration gradient by illumination. The separation of electrons and holes in the membrane under illumination results in a transmembrane potential which is thought to be the foundation for the pumping phenomenon. When used for harvesting solar energy, a sustained open circuit voltage of 550 mV and a current density of 2.4 μA/cm2 can reliably be generated, which can be further scaled up through series and parallel circuits of multiple membranes. The ion transport based photovoltaic system proposed here offers a roadmap for the development of devices by using simple, cheap, and stable polymeric carbon nitride.

Visible-light induced emulsion photopolymerization with carbon nitride as a stabilizer and photoinitiator

Graphitic carbon nitride is utilized as a stabilizer and photoinitiator for surfactant-free emulsion polymerization under visible light.

Formation and Properties of Poly(Ionic Liquid)-Carbene Nanogels Containing Individually Stabilized Silver Species

Imidazolium-based ionic liquids have the ability to undergo a variety of chemical reactions through an N-heterocyclic carbene (NHC) intermediate, which has expanded the chemical toolbox for new applications. Despite their uses and exploration, the carbene-forming properties and applications of their polymeric congeners, poly(ionic liquid)s (PILs), is still underdeveloped. Herein, we explore the NHC-forming properties of a theophylline-derived PIL for nanogel synthesis. Using silver oxide as both the carbene-forming reagent and cross-linker, nanogels containing individually stabilized ions can be created with different sizes and morphology, including large "galaxy-like" superstructures. Using high-resolution TEM techniques, we directly observed the sub-nanometer structure of these constructs. These features combined exemplify the unique chemistry of poly-NHCs for single-metal-ion-stabilization nanogel design.

Noise reduction in CCD measurements by improving the quality of dark-reference images

This publication is a systematic investigation of the effect the improvement of dark-reference images has on the resulting bright-field images. For this, data were acquired with three different charge-coupled device cameras attached to two different transmission electron microscopes. Multi-frame acquisitions and methods to correct x-ray noise are introduced and quantified as options to improve the dark-reference images. Furthermore, the influence of x-ray noise on transmission electron microscopy measurements is discussed and observations on its composition are shared.

Continuous hydrothermal flow synthesis of graphene quantum dots

A rapid, continuous hydrothermal flow synthesis route and life cycle assessment was employed for the synthesis of graphene quantum dots in the presence of calixarene.

Optimizing Optical Absorption, Exciton Dissociation, and Charge Transfer of a Polymeric Carbon Nitride with Ultrahigh Solar Hydrogen Production Activity

Polymeric or organic semiconductors are promising candidates for photocatalysis but mostly only show moderate activity owing to strongly bound excitons and insufficient optical absorption. Herein, we report a facile bottom-up strategy to improve the activity of a carbon nitride to a level in which a majority of photons are really used to drive photoredox chemistry. Co-condensation of urea and oxamide followed by post-calcination in molten salt is shown to result in highly crystalline species with a maximum π-π layer stacking distance of heptazine units of 0.292 nm, which improves lateral charge transport and interlayer exciton dissociation. The addition of oxamide decreases the optical band gap from 2.74 to 2.56 eV, which enables efficient photochemistry also with green light. The apparent quantum yield (AQY) for H₂ evolution of optimal samples reaches 57 % and 10 % at 420 nm and 525 nm, respectively, which is significantly higher than in most previous experiments.

Rapid synthesis of graphene quantum dots using a continuous hydrothermal flow synthesis approach

A rapid and environmentally benign synthesis of green fluorescent graphene quantum dots (GQD) with low cytotoxicity via Continuous Hydrothermal Flow Synthesis (CHFS) aided by calix[4]arene tetrasulfonic acid (SCX4) as a particle size limiting agent.

Calixarene Assisted Rapid Synthesis of Silver-Graphene Nanocomposites with Enhanced Antibacterial Activity

Demonstrated herein is a single rapid approach employed for synthesis of Ag-graphene nanocomposites, with excellent antibacterial properties and low cytotoxicity, by utilizing a continuous hydrothermal flow synthesis (CHFS) process in combination with p-hexasulfonic acid calix[6]arene (SCX6) as an effective particle stabilizer. The nanocomposites showed high activity against E. coli (Gram-negative) and S. aureus (Gram-positive) bacteria. The materials were characterized using a range of techniques including transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, UV-vis spectrophotometry, FT-IR, and X-ray powder diffraction (XRD). This rapid, single step synthetic approach not only provides a facile means of enabling and controlling graphene reduction (under alkaline conditions) but also offers an optimal route for homogeneously producing and depositing highly crystalline Ag nanostructures into reduced graphene oxide substrate.

Highly Stable and Conductive Microcapsules for Enhancement of Joule Heating Performance

Nanocarbons show great promise for establishing the next generation of Joule heating systems, but suffer from the limited maximum temperature due to precociously convective heat dissipation from electrothermal system to surrounding environment. Here we introduce a strategy to eliminate such convective heat transfer by inserting highly stable and conductive microcapsules into the electrothermal structures. The microcapsule is composed of encapsulated long-chain alkanes and graphene oxide/carbon nanotube hybrids as core and shell material, respectively. Multiform carbon nanotubes in the microspheres stabilize the capsule shell to resist volume-change-induced rupture during repeated heating/cooling process, and meanwhile enhance the thermal conductance of encapsulated alkanes which facilitates an expeditious heat exchange. The resulting microcapsules can be homogeneously incorporated in the nanocarbon-based electrothermal structures. At a dopant of 5%, the working temperature can be enhanced by 30% even at a low voltage and moderate temperature, which indicates a great value in daily household applications. Therefore, the stable and conductive microcapsule may serve as a versatile and valuable dopant for varieties of heat generation systems.

Tailored optical vector fields for ultrashort-pulse laser induced complex surface plasmon structuring

Precise tailoring of optical vector beams is demonstrated, shaping their focal electric fields and used to create complex laser micro-patterning on a metal surface. A Spatial Light Modulator (SLM) and a micro-structured S-waveplate were integrated with a picosecond laser system and employed to structure the vector fields into radial and azimuthal polarizations with and without a vortex phase wavefront as well as superposition states. Imprinting Laser Induced Periodic Surface Structures (LIPSS) elucidates the detailed vector fields around the focal region. In addition to clear azimuthal and radial plasmon surface structures, unique, variable logarithmic spiral micro-structures with a pitch Λ ∼1μm, not observed previously, were imprinted on the surface, confirming unambiguously the complex 2D focal electric fields. We show clearly also how the Orbital Angular Momentum(OAM) associated with a helical wavefront induces rotation of vector fields along the optic axis of a focusing lens and confirmed by the observed surface micro-structures.

Improving the reliability of the background extrapolation in transmission electron microscopy elemental maps by using three pre-edge windows

Over the last decades, elemental maps have become a powerful tool for the analysis of the spatial distribution of the elements within specimen. In energy-filtered transmission electron microscopy (EFTEM) one commonly uses two pre-edge and one post-edge image for the calculation of elemental maps. However, this so called three-window method can introduce serious errors into the extrapolated background for the post-edge window. Since this method uses only two pre-edge windows as data points to calculate a background model that depends on two fit parameters, the quality of the extrapolation can be estimated only statistically assuming that the background model is correct. In this paper, we will discuss a possibility to improve the accuracy and reliability of the background extrapolation by using a third pre-edge window. Since with three data points the extrapolation becomes over-determined, this change permits us to estimate not only the statistical uncertainly of the fit, but also the systematic error by using the experimental data. Furthermore we will discuss in this paper the acquisition parameters that should be used for the energy windows to reach an optimal signal-to-noise ratio (SNR) in the elemental maps.

Experimental evidence of self-limited growth of nanocrystals in glass

Growth of nanocrystals precipitated in glasses with specific compositions can be effectively limited by diffusion barriers forming around crystallites. For the first time, we do experimentally prove this concept of self-limited growth on the nanoscale for a SiO(2)/Al(2)O(3)/Na(2)O/K(2)O/BaF(2) glass in which BaF(2) nanocrystals are formed. As shown by advanced analytical transmission electron microscopy techniques, the growth of these BaF(2) crystals, having great potential for photonic applications, is inherently limited by the formation of a ca. 1 nm wide SiO(2) shell.