All-Electrical Readout of Coherently Controlled Spins in Silicon Carbide

Spin defects in silicon carbide are promising candidates for quantum sensing applications as they exhibit long coherence times even at room temperature. However, spin readout methods that rely on fluorescence detection can be challenging due to poor photon collection efficiency. Here, we demonstrate coherent spin control and all-electrical readout of a small ensemble of spins in a SiC junction diode using pulsed electrically detected magnetic resonance. A lock-in detection scheme based on a three stage modulation cycle is implemented, significantly enhancing the signal-to-noise ratio. This technique enabled observation of coherent spin dynamics, specifically Rabi spin nutation, spin dephasing, and spin decoherence. The use of these protocols for magnetometry applications is evaluated.

NCOA4 drives ferritin phase separation to facilitate macroferritinophagy and microferritinophagy

A ferritin particle consists of 24 ferritin proteins (FTH1 and FTL) and stores iron ions within it. During iron deficiency, ferritin particles are transported to lysosomes to release iron ions. Two transport pathways have been reported: macroautophagy and ESCRT-dependent endosomal microautophagy. Although the membrane dynamics of these pathways differ, both require NCOA4, which is thought to be an autophagy receptor for ferritin. However, it is unclear whether NCOA4 only acts as an autophagy receptor in ferritin degradation. Here, we found that ferritin particles form liquid-like condensates in a NCOA4-dependent manner. Homodimerization of NCOA4 and interaction between FTH1 and NCOA4 (i.e., multivalent interactions between ferritin particles and NCOA4) were required for the formation of ferritin condensates. Disruption of these interactions impaired ferritin degradation. Time-lapse imaging and three-dimensional correlative light and electron microscopy revealed that these ferritin-NCOA4 condensates were directly engulfed by autophagosomes and endosomes. In contrast, TAX1BP1 was not required for the formation of ferritin-NCOA4 condensates but was required for their incorporation into autophagosomes and endosomes. These results suggest that NCOA4 acts not only as a canonical autophagy receptor but also as a driver to form ferritin condensates to facilitate the degradation of these condensates by macroautophagy (i.e., macroferritinophagy) and endosomal microautophagy (i.e., microferritinophagy).

Proteome analysis of high affinity mouse saliva proteins to hydroxyapatite

Caries sensitivity varies between the two strains of inbred mice, BALB/cA has high sensitivity and C3H/HeN has low sensitivity. One potential reason seems to be a difference in pellicle-forming saliva protein composition. Here, we performed a proteomic analysis in order to identify differences of hydroxyapatite (HAP) adsorbed saliva proteins between these two mouse strains. HAP column chromatography revealed twice the quantity of high-affinity saliva proteins in C3H/HeN compared to BALB/cA. One- and two-dimensional electrophoresis showed 2 bands/spots with deviating migration. They were identified as murine carbonic anhydrase VI (CAVI) by peptide mass fingerprinting and confirmed with western blotting using a specific polyclonal antibody. Total RNA from the salivary glands of both mouse strains, PCR amplification of cDNA with a CAVI specific primer, and sequence analysis revealed one different base in codon 96, resulting in one different amino acid. Glyco-chains of CAVI deviate in one N-glycan, confirmed by mass analysis. CAVI activity was estimated from distinct circular dichroism spectra of the molecules and found higher in C3H/HeN mice. In summary, the CAVI composition of BALB/cA and C3H/HeN differs in one amino acid and a glyco-chain modification. Further, saliva from caries resistant C3H/HeN mice displayed higher CAVI activity and also overall hydroxyapatite adsorption, suggesting a relationship with caries susceptibility.

•

CAVI was the salivary protein with high affinity for hydroxyapatite in two mice strains with different caries susceptibility.

•

CAVI of the two strains showed differences in molecular weight, amino acids and genes, glyco-chain modification and enzyme activity.

•

Differences in CAVI activity might contribute to caries susceptibility.

Limosilactobacillus (Lactobacillus) fermentum ALAL020, a Probiotic Candidate Bacterium, Produces a Cyclic Dipeptide That Suppresses the Periodontal Pathogens Porphyromonas gingivalis and Prevotella intermedia

Periodontal disease develops as a result of oral microbiota in dysbiosis, followed by the growth of periodontal pathogens such as Porphyromonas gingivalis and Prevotella intermedia. In case of acute symptoms, antibacterial agents and disinfectants are administered, however the appearance of drug-resistant bacteria and allergies cause problems. In recent years, studies on the effects of probiotics have been conducted as an alternative therapy for periodontitis. However, the basic mechanism of the inhibitory effect of probiotic bacteria on periodontal disease has not been clearly elucidated. To clarify the antibacterial mechanism of probiotics against periodontal pathogens, we used Limosilactobacillus (Lactobacillus) fermentum ALAL020, which showed the strongest antibacterial activity against P. gingivalis and P. intermedia among 50 screened lactic acid bacteria strains. The antibacterial substances produced were identified and structurally analyzed. After neutralizing the MRS liquid culture supernatant of ALAL020 strain, the molecular weight (m/z) of the main antibacterial substance separated by gel filtration column chromatography and reverse phase HPLC was 226.131. This low molecular weight compound was analyzed by LC-MS and disclosed the composition formula C₁₁H₁₈O₃N₂, however the molecular structure remained unknown. Then, structural analysis by NMR revealed C₁₁H₁₈O₃N₂ as the cyclic dipeptide, “hexahydro-7-hydroxy-3- (2-methylpropyl) pyrrolo [1,2-a] pyrazine-1,4-dion cyclo (Hyp-Leu) “. Based on the results of this analysis, cyclo (Hyp-Leu) was chemically synthesized and the antibacterial activity against P. gingivalis and P. intermedia was measured. The minimum inhibitory concentration (MIC) was 2.5 g/L and the minimum bactericidal concentration (MBC) was shown to be less than 5 g/L. In addition, an in vitro epithelial tissue irritation test at 10 g/L showed no tissue toxicity. So far there are no reports of this peptide being produced by probiotic bacteria. Furthermore, antibacterial activity of this cyclic dipeptide against periodontal disease bacteria has not been confirmed. The results of this study might lead to a comprehensive understanding of the antibacterial mechanism against periodontal disease bacteria in future, and are considered applicable for the prevention of periodontal disease.

Clinical Utility of Intravascular Ultrasound (IVUS) in Carotid Artery Interventions: A Systematic Review and Meta-analysis

BACKGROUND

Carotid plaque morphology plays an important role in determining outcome of carotid artery stenting (CAS). Intravascular ultrasound (IVUS) and its extension VH (Virtual Histology)-IVUS evaluate plaque characteristics in real time and guide decision making during stenting. To date, there is no consensus about indications of IVUS and its validated methods. This systematic review and meta-analysis aims to evaluate the clinical utility of IVUS in carotid artery interventions (CAS) and develop a future consensus for research and practice parameters.

METHODS

A systematic review and meta-analysis was performed of the English literature articles published till February 2021. Studies reporting on IVUS parameters and findings and also its performance compared with other imaging modalities were included in review. Pooled prevalence with 95% confidence intervals (CI) was calculated. The statistical analysis was conducted in R version 3.6.2.

RESULTS

A total of 2015 patients from 29 studies were included. Proportional meta-analysis was performed on 1566 patients from 11 studies. In 9 studies, stroke/transient ischemic attack (TIA) had a pooled prevalence of 4% (95% CI 3%-5%) while asymptomatic stroke had a pooled prevalence of 46% (95% CI 31%-62%) in 4 studies following IVUS. Two studies reported that IVUS detected more plaque protrusion compared with angiography (n=33/396 vs 11/396). IVUS led to stent type or size change in 8 of 48 cases which were missed on angiography in 3 other studies. Concordance between VH-IVUS and true histology was good at 80% to 85% reported in 2 studies.

CONCLUSIONS

This systematic review and meta-analysis showed, though IVUS fared better to computed tomography (CT)/magnetic resonance (MR) angiography for better stent selection during CAS, with low to moderate risk of bias in the studies included. However, large scale, preferably randomized controlled studies are needed to predict its role in determining clinical outcome.

Effects of Antimicrobial Photodynamic Therapy on Organic Solution and Root Surface In Vitro

Antimicrobial photodynamic therapy (a-PDT) is attracting attention as a new form of dental treatment. While it is primarily applied to produce an antibacterial effect, it decreases lipopolysaccharide (LPS) and protease activity. Here, we evaluated differences in the antibacterial activity of a-PDT on three types of bacteria and the effects on the organic substances (i.e., albumin and LPS). Furthermore, we investigated the effects of a-PDT on root surfaces. A FotoSan630® and toluidine blue were used to perform a-PDT in this study. We measured its antimicrobial activity against Porphyromonas gingivalis, Streptococcus mutans, and Enterococcus faecalis. Antimicrobial testing revealed strong antimicrobial action and P. gingivalis, E. faecalis, and S. mutans were almost undetectable after 50, 120, and 100 s, respectively. In organic resolution tests, albumin was significantly decreased from 1 min after a-PDT application onward, while LPS significantly decreased at 5 min after the application. The root surfaces after a-PDT were confirmed to be cleaner than the controls without suffering any damage. Depending on the bacterial species, a-PDT exhibited antimicrobial activity against various types of bacteria and sensitivity differed. Moreover, we reported that a-PDT resolves protein and LPS, enabling the formation of a healthy root surface without any damage.

Plaque-removal effect of ultrafine bubble water: Oral application in patients undergoing orthodontic treatment

During orthodontic treatment, plaque tends to form around fixed orthodontic appliances, which increases the risk of dental caries. It has been reported that ultarafine bubble with a diameter <1 μm water (UFBW) effectively removes organic matter. In addition, UFBW is harmless and stable for at least one month with refrigeration. The aim of this study was to examine the plaque-removal effect of ultrafine bubble water (UFBW) to establish a new method to prevent dental caries in patients during orthodontic treatment procedures. The in vitro study examined different concentrations of UFBW and compared the cleaning effect to that of existing mouthwashes. High-concentration UFBW (HUFBW) was most effective in cleaning. In the subsequent clinical study, HUFBW showed a significantly higher plaque-removal effect compared to distilled water (p<0.01). Thus, supplementary use of HUFBW could decrease the incidence of dental caries during orthodontic treatment.

Lactobacillus Plantarum 108 Inhibits Streptococcus mutans and Candida albicans Mixed-Species Biofilm Formation

Streptococcus mutans is the principal biofilm forming oral pathogen associated with dental caries. Studies have shown that Candida albicans, a commensal oral fungus is capable of forming pathogenic mixed-species biofilms with S. mutans. The treatment of bacterial and fungal infections using conventional antimicrobial agents has become challenging due to the antimicrobial resistance of the biofilm mode of growth. The present study aimed to evaluate the efficacy of secretory components of Lactobacillus plantarum 108, a potentially promising probiotic strain, against S. mutans and C. albicans single and mixed-species biofilms. L. plantarum 108 supernatant inhibited S. mutans and C. albicans single-species biofilms as shown by XTT reduction assay, crystal violet assay, and colony forming units counting. The probiotic supernatant significantly inhibited the S. mutans and C. albicans mixed-species biofilm formation. The pre-formed mixed-species biofilms were also successfully reduced. Confocal microscopy showed poorly developed biofilm architecture in the probiotic supernatant treated biofilms. Moreover, the expression of S. mutans genes associated with glucosyltransferase activity and C. albicans hyphal specific genes (HWP1, ALS1 and ALS3) were down-regulated in the presence of the probiotic supernatant. Altogether, the data demonstrated the capacity of L. plantarum 108 supernatant to inhibit the S. mutans and C. albicans mixed-species biofilms. Herein, we provide a new insight on the potential of probiotic-based strategies to prevent bacterial-fungal mixed-species biofilms associated with dental caries.

High microbicidal effect of peroxynitric acid on biofilm-infected dentin in a root carious tooth model and verification of tissue safety

OBJECTIVES

Root-caries, which frequently occurs in elderly people, is more difficult to treat than caries in a tooth crown, especially in filling restorations. To overcome this difficulty, it is essential to find a strategy for sufficiently sterilizing the infected dentin; however, techniques for sterilizing carious pathogens inside the biofilm, called dental plaque, have not yet been established. Recently, dental applications of plasma sterilization technology have attracted attention. The mechanism of plasma sterilization became clear, and revealed that peroxynitric acid (PNA) is an effective sterilization substance. Highly concentrated PNA solutions can be chemically synthesized in large quantities without using plasma technology. We thought that the application of PNA solution could be a novel treatment for root caries, and examined the microbicidal effect and safety of PNA.

METHODS

A sterilization experiment was performed using an extracted tooth model infected with Streptococcus mutans. Subsequently, a biofilm of S. mutans and Candida albicans was formed on a plate or a dentin slice, and sterilization experiments were performed in comparison with chlorhexidine. Furthermore, a toxicity test of PNA was performed using an epithelial tissue model.

RESULTS

In the infection model, sterilization was achieved with a 22 mM PNA solution in only 10 s. In the biofilm model, a 22 mM PNA solution showed a higher microbicidal effect than 2.0% chlorhexidine. In the toxicity test, 2.0% chlorhexidine was toxic, but a 220 mM PNA solution showed no toxicity.

CONCLUSIONS

PNA is an unprecedented disinfectant that has high microbicidal activity on biofilm and is safe for tissues.

Impact of technically qualified surgeons on laparoscopic colorectal resection outcomes: results of a propensity score-matching analysis

Background

The Endoscopic Surgical Skill Qualification System (ESSQS) was introduced in Japan to improve the quality of laparoscopic surgery. This cohort study investigated the short‐ and long‐term postoperative outcomes of colorectal cancer laparoscopic procedures performed by or with qualified surgeons compared with outcomes for unqualified surgeons.

Methods

All laparoscopic colorectal resections performed from 2010 to 2013 in 11 Japanese hospitals were reviewed retrospectively. The procedures were categorized as performed by surgeons with or without the ESSQS qualification and patients' clinical, pathological and surgical features were used to match subgroups using propensity scoring. Outcome measures included postoperative and long‐term results.

Results

Overall, 1428 procedures were analysed; 586 procedures were performed with ESSQS‐qualified surgeons and 842 were done by ESSQS‐unqualified surgeons. Upon matching, two cohorts of 426 patients were selected for comparison of short‐term results. A prevalence of rectal resection (50·3 versus 40·5 per cent; P < 0·001) and shorter duration of surgery (230 versus 238 min; P = 0·045) was reported for the ESSQS group. Intraoperative and postoperative complication and reoperation rates were significantly lower in the ESSQS group than in the non‐ESSQS group (1·2 versus 3·6 per cent, P = 0·014; 4·6 versus 7·5 per cent, P = 0·025; 1·9 versus 3·9 per cent, P = 0·023, respectively). These findings were confirmed after propensity score matching. Cox regression analysis found that non‐attendance of ESSQS‐qualified surgeons (hazard ratio 12·30, 95 per cent c.i. 1·28 to 119·10; P = 0·038) was independently associated with local recurrence in patients with stage II disease.

Conclusion

Laparoscopic colorectal procedures performed with ESSQS‐qualified surgeons showed improved postoperative results. Further studies are needed to investigate the impact of the qualification on long‐term oncological outcomes.

Analysis of plaque microbiota and salivary proteins adhering to dental materials

OBJECTIVES

Plaque causes oral diseases and aspiration-pneumonia in the elderly. It is not known whether pellicle-like attached salivary proteins and microbiota on dental materials are identical to those on teeth. The purpose of this study was to determine the properties of salivary proteins and microbiota that attach to dental materials.

METHODS

Eight subjects wore removable oral splints with pieces of pure-titanium, cobalt-chromium alloy, silver-palladium-copper-gold-alloy, denture-base-resin, and hydroxyapatite for 24 h. The bacteria that adhered to each material were analyzed using 16S rRNA sequencing simultaneously. Each material sample was then immersed in pooled saliva, and the attached proteins were collected. Salivary proteins were analyzed using MALDI-TOF/MS, and high molecular weight proteins were identified using peptide mass fingerprinting.

RESULTS

Among the dental materials, the α- and β-diversity of adherent flora were similar. The bacterial species that adhered easily to materials were Streptococcus sp. oral taxon 058, Neisseria mucosa, Gemella haemolysans, and Rothia dentocariosa. Regardless of material, the peaks or spots of attached salivary proteins had similar patterns, containing functioning proteins such as anchoring receptors for early colonizers.

CONCLUSIONS

There were no significant differences in microbiota and protein adherence in hydroxyapatite compared to the dental materials. Therefore, similar microbiota was determined to have formed on the similar pellicle-like proteins. In our study, the characteristics of plaque adhesion on both hydroxyapatite and dental materials were clarified. Based on this study, the creation of new methods of inhibiting plaque adhesion to prevent aspiration-pneumonia and oral infections can be undertaken.

Analysis of oral microbiota in Japanese oral cancer patients using 16S rRNA sequencing

OBJECTIVES

It is important to determine the cause of increasing oral cancer occurrence and mortality rates in Japan, because the mortality rate has recently decreased in other developed countries. The impact of microbiota in carcinogenesis, especially in the digestive tract has been reported. This study aimed to clarify the relationship between oral cancer and oral microbiota in Japanese patients.

METHODS

DNA was extracted from salivary samples of 60 oral cancer patients and 80 non-cancer individuals as controls. We performed metagenomic analysis using 16S rRNA amplicon sequencing. Statistical analysis in this study was performed using R (version 3.5.0).

RESULTS

Oral cancer patients showed higher α-diversity compared to the control group, and the β-diversity between the two groups differed significantly. Further, there was a significant difference in the abundance ratio of bacterial genera between the two groups. Peptostreptococcus, Fusobacterium, Alloprevotella, and Capnocytophaga were more abundant in the cancer group compared to the control, whereas Rothia and Haemophilus were less abundant (p < 0.01). A negative correlation in the microbiota composition was confirmed between the operational taxonomic units (OTU) of genus Rothia and T-stage progression using the TNM classification method. We performed logistic regression analysis to investigate the impact factor for the oral cancer group, and the result showed that Chao 1 index and sex are statistically significant variables.

CONCLUSIONS

In this study, we observed an increased bacterial diversity in oral cancer patients and found distribution changes for some bacteria.

Extending coherence time of macro-scale diamond magnetometer by dynamical decoupling with coplanar waveguide resonator

Ultimate sensitivity for quantum magnetometry using nitrogen-vacancy (NV) centers in a diamond is limited by a number of NV centers and coherence time. Microwave irradiation with a high and homogeneous power density for a large detection volume is necessary to achieve a highly sensitive magnetometer. Here, we demonstrate a microwave resonator to enhance the power density of the microwave field and an optical system with a detection volume of 1.4 × 10^-3 mm³. The strong microwave field enables us to achieve 48 ns Rabi oscillation which is sufficiently faster than the phase relaxation time of NV centers. This system combined with a decoupling pulse sequence, XY16, extends the spin coherence time (T ₂) up to 27 times longer than that with a spin echo method. Consequently, we obtained an AC magnetic field sensitivity of 10.8 pt/ Hz using the dynamical decoupling pulse sequence.

A Proposal of Remedies for Oral Diseases Caused by Candida: A Mini Review

An opportunistic pathogen, Candida is not only related to oral problems such as oral candidiasis and denture stomatitis, but also to systemic diseases such as aspiration pneumonia and fungemia. The carriage rate of Candida species in the oral cavity of individuals wearing dentures and with removable orthodontic appliances, has increased. Moreover, it is one of the causal pathogens in refractory infected root canals because of its resistance to antifungal drugs in root canal therapy and poses a great challenge during the treatment of patients. This problem has led to the search for alternative strategies for the treatment and management of C. albicans infections. In this mini review, recent preventive strategies against Candida infection in the oral mucosa with natural product-derived antifungal molecules were discussed. Inhibitory strategies by introducing competitive naturally-derived antifungal peptide molecules with Candida adhesion molecules were specifically introduced. In addition, novel sterilization methods for Candida-infected root canals and tooth structures in the oral cavity were considered, with focused attention on the activities of reactive oxygen species. The possibility of application of these novel strategies in clinical treatments and daily life was also proposed.

Cortical Dipole Imaging of Movement-related Potentials by Means of Parametric Inverse Filters Incorporating with Signal and Noise Covariance

Objective : The objective of this study is to explore suitable spatial filters for inverse estimation of cortical equivalent dipole layer imaging from the scalp electroencephalogram. We utilize cortical dipole source imaging to locate the possible generators of scalpmeasured movement-related potentials (MRPs) in human.

Methods : The effects of incorporating signal and noise covariance into inverse procedures were examined by computer simulations and experimental study. The parametric projection filter (PPF) and parametric Weiner filter (PWF) were applied to an inhomogeneous threesphere head model under various noise conditions.

Results : The present simulation results suggest that the PWF incorporating signal information provides better cortical dipole layer imaging results than the PPF and Tikhonov regularization under the condition of moderate and high correlation between signal and noise distributions. On the other hand, the PPF has better performance than other inverse filters under the condition of low correlation between signal and noise distributions. The proposed methods were applied to self-paced MRPs in order to identify the anatomic substrate locations of neural generators. The dipole layer distributions estimated by means of PPF are well-localized as compared with blurred scalp potential maps and dipole layer distribution estimated by Tikhonov regularization. The proposed methods demonstrated that the contralateral premotor cortex was preponderantly activated in relation to movement performance.

Conclusions : In cortical dipole source imaging, the PWF has better performance especiallywhen the correlation between the signal and noise is high. The proposed inverse method was applicable to human experiments of MRPs if the signal and noise covariances were obtained.

Magnetic field-induced enhancement of the nitrogen-vacancy fluorescence quantum yield

The nitrogen-vacancy (NV) centre in diamond is a unique optical defect that is used in many applications today and methods to enhance its fluorescence brightness are highly sought after. We observed experimentally an enhancement of the NV quantum yield by up to 7% in bulk diamond caused by an external magnetic field relative to the field-free case. This observation is rationalised phenomenologically in terms of a magnetic field dependence of the NV excited state triplet-to-singlet transition rate. The theoretical model is in good qualitative agreement with the experimental results at low excitation intensities. Our results significantly contribute to our fundamental understanding of the photophysical properties of the NV defect in diamond.

Three-Dimensional Proton Beam Writing of Optically Active Coherent Vacancy Spins in Silicon Carbide

Constructing quantum devices comprises various challenging tasks, especially when concerning their nanoscale geometry. For quantum color centers, the traditional approach is to fabricate the device structure after the nondeterministic placement of the centers. Reversing this approach, we present the controlled generation of quantum centers in silicon carbide (SiC) by focused proton beam in a noncomplex manner without need for pre- or postirradiation treatment. The generation depth and resolution can be predicted by matching the proton energy to the material's stopping power, and the amount of quantum centers at one specific sample volume is tunable from ensembles of millions to discernible single photon emitters. We identify the generated centers as silicon vacancies through their characteristic magnetic resonance signatures and demonstrate that they possess a long spin-echo coherence time of 42 ± 20 μs at room temperature. Our approach hence enables the fabrication of quantum hybrid nanodevices based on SiC platform, where spin centers are integrated into p-i-n diodes, photonic cavities, and mechanical resonators.

Fluorescent color centers in laser ablated 4H-SiC nanoparticles

Nanostructured and bulk silicon carbide (SiC) has recently emerged as a novel platform for quantum nanophotonics due to its harboring of paramagnetic color centers, having immediate applications as a single photon source and spin optical probes. Here, using ultra-short pulsed laser ablation, we fabricated from electron irradiated bulk 4H-SiC, 40-50 nm diameter SiC nanoparticles, fluorescent at 850-950 nm. This photoluminescence is attributed to the silicon vacancy color centers. We demonstrate that the original silicon vacancy color centers from the target sample were retained in the final nanoparticles solution, exhibiting excellent colloidal stability in water over several months. Our work is relevant for quantum nanophotonics, magnetic sensing, and biomedical imaging applications.

Plasma-treated water eliminates Streptococcus mutans in infected dentin model

Non-mechanical procedures for removing caries-infected dentin are warranted in dentistry. We previously demonstrated the marked sterilization effect for direct irradiation of low-temperature plasma using dentin model infected with Streptococcus mutans. However it requires 180 s of intraoral plasma irradiation to eliminate bacteria. We alternatively investigated whether plasma-treated water (PTW), i.e., pure water exposed to plasma in an atmosphere, has a same bactericidal activity with the plasma irradiation. In the infected dentin model, the viable S. mutans counts recovered by bur at depth of 0.8-2.4 mm from the cavity floor were 10⁴-10⁶ CFU/round bur. After PTW application for only 10 s, the count was significantly decreased to below the detection limit (2.5 CFU/round bur) or 3.0±5.0 CFU/round bur. Since the bactericidal activity of PTW is rapidly deactivated at body temperature (37°C), PTW is likely to be biocompatible and holds significant potential for non-mechanical procedures for removing caries-infected dentin.

Bright and photostable nitrogen-vacancy fluorescence from unprocessed detonation nanodiamond

Bright and photostable fluorescence from nitrogen-vacancy (NV) centers is demonstrated in unprocessed detonation nanodiamond particle aggregates. The optical properties of these particles is analyzed using confocal fluorescence microscopy and spectroscopy, time resolved fluorescence decay measurements, and optically detected magnetic resonance experiments. Two particle populations with distinct optical properties are identified and compared to high-pressure high-temperature (HPHT) fluorescent nanodiamonds. We find that the brightness of one detonation nanodiamond particle population is on the same order as that of highly processed fluorescent 100 nm HPHT nanodiamonds. Our results may open the path to a simple and up-scalable route for the production of fluorescent NV nanodiamonds for use in bioimaging applications.

Dental plaque assessment lifelogging system using commercial camera for oral healthcare

We present a system for estimating the dental plaque adhesion area using a commercial camera image for oral healthcare via management of the intraoral environment. In recent years, several studies have reported on the relationship between a general disease and a periodontal disease. Such studies mention that normalization of the intraoral environment by tooth brushing is the most important treatment in preventive dentistry. However, evaluation of individual tooth brushing skill is difficult. Some devices for automatically measuring the quantity of dental plaque have already been proposed for the teaching tool of tooth brushing. However, these devices have certain limitations, such as large size, requirement to fix the head position, and limited applicability in daily life. In this study, we propose a method for calculating the dental plaque adhesion area using a commercial camera and an intraoral camera. We also propose an evaluation method for the quantity of adhered dental plaque for replacing the Plaque Control Record (PCR). The relationship between PCR of the front teeth and that of all teeth was investigated by using the proposed method. The experimental results show that the proposed method can estimate the PCR of all teeth from the information of the front tooth. This method is not dependent on a particular camera system, and is applicable with many types of cameras, including smartphones. Therefore, it will be a useful tool in daily use for routine and sustainable management of the intraoral environment.

Measurement of the centrality dependence of the charged-particle pseudorapidity distribution in proton-lead collisions at [Formula: see text] TeV with the ATLAS detector

The centrality dependence of the mean charged-particle multiplicity as a function of pseudorapidity is measured in approximately 1 [Formula: see text]b[Formula: see text] of proton-lead collisions at a nucleon-nucleon centre-of-mass energy of [Formula: see text] [Formula: see text] using the ATLAS detector at the Large Hadron Collider. Charged particles with absolute pseudorapidity less than 2.7 are reconstructed using the ATLAS pixel detector. The [Formula: see text] collision centrality is characterised by the total transverse energy measured in the Pb-going direction of the forward calorimeter. The charged-particle pseudorapidity distributions are found to vary strongly with centrality, with an increasing asymmetry between the proton-going and Pb-going directions as the collisions become more central. Three different estimations of the number of nucleons participating in the [Formula: see text] collision have been carried out using the Glauber model as well as two Glauber-Gribov inspired extensions to the Glauber model. Charged-particle multiplicities per participant pair are found to vary differently for these three models, highlighting the importance of including colour fluctuations in nucleon-nucleon collisions in the modelling of the initial state of [Formula: see text] collisions.

Therapeutic Application of Synbiotics, a Fusion of Probiotics and Prebiotics, and Biogenics as a New Concept for Oral Candida Infections: A Mini Review

Candida is a major human fungal pathogen causing infectious conditions predominantly in the elderly and immunocompromised hosts. Although Candida resides as a member of the oral indigenous microbiota in symbiosis, some circumstances may cause microbial imbalance leading to dysbiosis and resultant oral candidiasis. Therefore, oral microbial symbiosis that suppresses the overgrowth of Candida is important for a healthy oral ecosystem. In this regard, probiotics, prebiotics, and synbiotics can be considered a potential therapeutic and preventive strategy against oral candidiasis. Prebiotics have a direct effect on microbial growth as they stimulate the growth of beneficial bacteria and suppress the growth of pathogens. Probiotics render a local protective effect against pathogens and a systemic indirect effect on immunological amelioration. Synbiotics are fusion products of prebiotics and probiotics. This mini review discusses the potential use and associated limitations of probiotics, prebiotics, and synbiotics for the prevention and treatment of oral candidiasis. We will also introduce biogenics, a recent concept derived from the work on probiotics. Biogenics advocates the use of beneficial bioactive substances produced by probiotic bacteria, whose activities are independent from the viability of probiotic bacteria in human bodies.

Single-photon emitting diode in silicon carbide

Electrically driven single-photon emitting devices have immediate applications in quantum cryptography, quantum computation and single-photon metrology. Mature device fabrication protocols and the recent observations of single defect systems with quantum functionalities make silicon carbide an ideal material to build such devices. Here, we demonstrate the fabrication of bright single-photon emitting diodes. The electrically driven emitters display fully polarized output, superior photon statistics (with a count rate of >300 kHz) and stability in both continuous and pulsed modes, all at room temperature. The atomic origin of the single-photon source is proposed. These results provide a foundation for the large scale integration of single-photon sources into a broad range of applications, such as quantum cryptography or linear optics quantum computing.

Search for Higgs boson pair production in the γγbb[over ¯] final state using pp collision data at sqrt[s]=8 TeV from the ATLAS detector

Searches are performed for resonant and nonresonant Higgs boson pair production in the γγbb[over ¯] final state using 20  fb^{-1} of proton-proton collisions at a center-of-mass energy of 8 TeV recorded with the ATLAS detector at the CERN Large Hadron Collider. A 95% confidence level upper limit on the cross section times branching ratio of nonresonant production is set at 2.2 pb, while the expected limit is 1.0 pb. The difference derives from a modest excess of events, corresponding to 2.4 standard deviations from the background-only hypothesis. The limit observed in the search for a narrow X→hh resonance ranges between 0.7 and 3.5 pb as a function of the resonance mass.

Jet energy measurement and its systematic uncertainty in proton-proton collisions at [Formula: see text] TeV with the ATLAS detector

The jet energy scale (JES) and its systematic uncertainty are determined for jets measured with the ATLAS detector using proton-proton collision data with a centre-of-mass energy of [Formula: see text] TeV corresponding to an integrated luminosity of [Formula: see text][Formula: see text]. Jets are reconstructed from energy deposits forming topological clusters of calorimeter cells using the anti-[Formula: see text] algorithm with distance parameters [Formula: see text] or [Formula: see text], and are calibrated using MC simulations. A residual JES correction is applied to account for differences between data and MC simulations. This correction and its systematic uncertainty are estimated using a combination of in situ techniques exploiting the transverse momentum balance between a jet and a reference object such as a photon or a [Formula: see text] boson, for [Formula: see text] and pseudorapidities [Formula: see text]. The effect of multiple proton-proton interactions is corrected for, and an uncertainty is evaluated using in situ techniques. The smallest JES uncertainty of less than 1 % is found in the central calorimeter region ([Formula: see text]) for jets with [Formula: see text]. For central jets at lower [Formula: see text], the uncertainty is about 3 %. A consistent JES estimate is found using measurements of the calorimeter response of single hadrons in proton-proton collisions and test-beam data, which also provide the estimate for [Formula: see text] TeV. The calibration of forward jets is derived from dijet [Formula: see text] balance measurements. The resulting uncertainty reaches its largest value of 6 % for low-[Formula: see text] jets at [Formula: see text]. Additional JES uncertainties due to specific event topologies, such as close-by jets or selections of event samples with an enhanced content of jets originating from light quarks or gluons, are also discussed. The magnitude of these uncertainties depends on the event sample used in a given physics analysis, but typically amounts to 0.5-3 %.

Observation of an excited Bc(±) meson state with the ATLAS detector

A search for excited states of the Bc(±) meson is performed using 4.9  fb(-1) of 7 TeV and 19.2  fb(-1) of 8 TeV pp collision data collected by the ATLAS experiment at the LHC. A new state is observed through its hadronic transition to the ground state, with the latter detected in the decay Bc(±)→J/ψπ(±). The state appears in the m(Bc(±)π(+)π(-))-m(Bc(±))-2m(π(±)) mass difference distribution with a significance of 5.2 standard deviations. The mass of the observed state is 6842±4±5  MeV, where the first error is statistical and the second is systematic. The mass and decay of this state are consistent with expectations for the second S-wave state of the Bc(±) meson, Bc(±)(2S).

Evidence for electroweak production of W±W±jj in pp collisions at sqrt[s] = 8 TeV with the ATLAS detector

This Letter presents the first study of W(±)W(±)jj, same-electric-charge diboson production in association with two jets, using 20.3 fb(-1) of proton-proton collision data at sqrt[s] = 8  TeV recorded by the ATLAS detector at the Large Hadron Collider. Events with two reconstructed same-charge leptons (e(±)e(±), e(±)μ(±), and μ(±)μ(±)) and two or more jets are analyzed. Production cross sections are measured in two fiducial regions, with different sensitivities to the electroweak and strong production mechanisms. First evidence for W(±)W(±)jj production and electroweak-only W(±)W(±)jj production is observed with a significance of 4.5 and 3.6 standard deviations, respectively. The measured production cross sections are in agreement with standard model predictions. Limits at 95% confidence level are set on anomalous quartic gauge couplings.

Muon reconstruction efficiency and momentum resolution of the ATLAS experiment in proton-proton collisions at [Formula: see text] TeV in 2010

This paper presents a study of the performance of the muon reconstruction in the analysis of proton-proton collisions at [Formula: see text] TeV at the LHC, recorded by the ATLAS detector in 2010. This performance is described in terms of reconstruction and isolation efficiencies and momentum resolutions for different classes of reconstructed muons. The results are obtained from an analysis of [Formula: see text] meson and [Formula: see text] boson decays to dimuons, reconstructed from a data sample corresponding to an integrated luminosity of 40 pb[Formula: see text]. The measured performance is compared to Monte Carlo predictions and deviations from the predicted performance are discussed.

Light-quark and gluon jet discrimination in [Formula: see text] collisions at [Formula: see text] with the ATLAS detector

A likelihood-based discriminant for the identification of quark- and gluon-initiated jets is built and validated using 4.7 fb[Formula: see text] of proton-proton collision data at [Formula: see text] [Formula: see text] collected with the ATLAS detector at the LHC. Data samples with enriched quark or gluon content are used in the construction and validation of templates of jet properties that are the input to the likelihood-based discriminant. The discriminating power of the jet tagger is established in both data and Monte Carlo samples within a systematic uncertainty of [Formula: see text] 10-20 %. In data, light-quark jets can be tagged with an efficiency of [Formula: see text] while achieving a gluon-jet mis-tag rate of [Formula: see text] in a [Formula: see text] range between [Formula: see text] and [Formula: see text] for jets in the acceptance of the tracker. The rejection of gluon-jets found in the data is significantly below what is attainable using a Pythia 6 Monte Carlo simulation, where gluon-jet mis-tag rates of 10 % can be reached for a 50 % selection efficiency of light-quark jets using the same jet properties.

Measurement of the centrality and pseudorapidity dependence of the integrated elliptic flow in lead-lead collisions at [Formula: see text] TeV with the ATLAS detector

The integrated elliptic flow of charged particles produced in Pb+Pb collisions at [Formula: see text] TeV has been measured with the ATLAS detector using data collected at the Large Hadron Collider. The anisotropy parameter, [Formula: see text], was measured in the pseudorapidity range [Formula: see text] with the event-plane method. In order to include tracks with very low transverse momentum [Formula: see text], thus reducing the uncertainty in [Formula: see text] integrated over [Formula: see text], a [Formula: see text] data sample recorded without a magnetic field in the tracking detectors is used. The centrality dependence of the integrated [Formula: see text] is compared to other measurements obtained with higher [Formula: see text] thresholds. The integrated elliptic flow is weakly decreasing with [Formula: see text]. The integrated [Formula: see text] transformed to the rest frame of one of the colliding nuclei is compared to the lower-energy RHIC data.

Electron reconstruction and identification efficiency measurements with the ATLAS detector using the 2011 LHC proton-proton collision data

Many of the interesting physics processes to be measured at the LHC have a signature involving one or more isolated electrons. The electron reconstruction and identification efficiencies of the ATLAS detector at the LHC have been evaluated using proton-proton collision data collected in 2011 at [Formula: see text] TeV and corresponding to an integrated luminosity of 4.7 fb[Formula: see text]. Tag-and-probe methods using events with leptonic decays of [Formula: see text] and [Formula: see text] bosons and [Formula: see text] mesons are employed to benchmark these performance parameters. The combination of all measurements results in identification efficiencies determined with an accuracy at the few per mil level for electron transverse energy greater than 30 GeV.

The differential production cross section of the [Formula: see text](1020) meson in [Formula: see text] = 7 TeV [Formula: see text] collisions measured with the ATLAS detector

A measurement is presented of the [Formula: see text] production cross section at [Formula: see text] = 7 TeV using [Formula: see text] collision data corresponding to an integrated luminosity of 383 [Formula: see text], collected with the ATLAS experiment at the LHC. Selection of [Formula: see text](1020) mesons is based on the identification of charged kaons by their energy loss in the pixel detector. The differential cross section is measured as a function of the transverse momentum, [Formula: see text], and rapidity, [Formula: see text], of the [Formula: see text](1020) meson in the fiducial region 500 [Formula: see text] 1200 MeV, [Formula: see text] 0.8, kaon [Formula: see text] 230 MeV and kaon momentum [Formula: see text] 800 MeV. The integrated [Formula: see text]-meson production cross section in this fiducial range is measured to be [Formula: see text] = 570 [Formula: see text] 8 (stat) [Formula: see text] 66 (syst) [Formula: see text] 20 (lumi) [Formula: see text].

Measurements of four-lepton production at the Z resonance in pp collisions at sqrt[s] = 7 and 8 TeV with ATLAS

Measurements of four-lepton (4ℓ, ℓ=e,μ) production cross sections at the Z resonance in pp collisions at the LHC with the ATLAS detector are presented. For dilepton and four-lepton invariant mass regions m(ℓ+ℓ(-)) > 5 GeV and 80<m(4ℓ) < 100 GeV, the measured cross sections are 76 ± 18(stat) ± 4(syst) ± 1.4(lumi) fb and 107 ± 9(stat) ± 4(syst) ± 3.0(lumi) fb at sqrt[s] = 7 and 8 TeV, respectively. By subtracting the nonresonant 4ℓ production contributions and normalizing with Z → μ(+)μ(-) events, the branching fraction for the Z boson decay to 4ℓ is determined to be (3.20 ± 0.25(stat) ± 0.13(syst)) × 10(-6), consistent with the standard model prediction.

Search for direct top squark pair production in events with a [Formula: see text] boson, [Formula: see text]-jets and missing transverse momentum in [Formula: see text] TeV [Formula: see text] collisions with the ATLAS detector

A search is presented for direct top squark pair production using events with at least two leptons including a same-flavour opposite-sign pair with invariant mass consistent with the [Formula: see text] boson mass, jets tagged as originating from [Formula: see text]-quarks and missing transverse momentum. The analysis is performed with proton-proton collision data at [Formula: see text] collected with the ATLAS detector at the LHC in 2012 corresponding to an integrated luminosity of 20.3 fb[Formula: see text]. No excess beyond the Standard Model expectation is observed. Interpretations of the results are provided in models based on the direct pair production of the heavier top squark state ([Formula: see text]) followed by the decay to the lighter top squark state ([Formula: see text]) via [Formula: see text], and for [Formula: see text] pair production in natural gauge-mediated supersymmetry breaking scenarios where the neutralino ([Formula: see text]) is the next-to-lightest supersymmetric particle and decays producing a [Formula: see text] boson and a gravitino ([Formula: see text]) via the [Formula: see text] process.

HTLV-1 HBZ positively regulates the mTOR signaling pathway via inhibition of GADD34 activity in the cytoplasm

Human T-cell leukemia virus type-1 (HTLV-1) infection causes adult T-cell leukemia (ATL). Modulation of the transcriptional control of cellular genes by HTLV-1 is thought to be associated with the development of ATL. The viral protein HTLV-1 basic leucine-zipper factor (HBZ) has been shown to dysregulate the activity of cellular transcription factors. Here, we demonstrate that HBZ is exported from the nucleus to the cytoplasm, where it activates the mammalian target of rapamycin (mTOR) signaling pathway through an association with growth arrest and DNA damage gene 34 (GADD34). The N-terminal region of HBZ interacts with the C-terminal region of GADD34. HBZ contains a functional nuclear export signal (NES) sequence within its N-terminal region and it is exported from the nucleus via the CRM1-dependent pathway. Nuclear export of HBZ is essential for its interaction with GADD34 and increased phosphorylation of S6 kinase, which is an established downstream target of the mTOR pathway. Starvation-induced autophagy is significantly suppressed by the overexpression of HBZ. These findings indicate that HBZ is actively exported to the cytoplasm, where it dysregulates the function of cellular factors.

Search for quantum black hole production in high-invariant-mass lepton+jet final states using pp collisions at √s=8 TeV and the ATLAS detector

This Letter presents a search for quantum black-hole production using 20.3 fb-1 of data collected with the ATLAS detector in pp collisions at the LHC at √s = 8 TeV. The quantum black holes are assumed to decay into a final state characterized by a lepton (electron or muon) and a jet. In either channel, no event with a lepton-jet invariant mass of 3.5 TeV or more is observed, consistent with the expected background. Limits are set on the product of cross sections and branching fractions for the lepton+jet final states of quantum black holes produced in a search region for invariant masses above 1 TeV. The combined 95% confidence level upper limit on this product for quantum black holes with threshold mass above 3.5 TeV is 0.18 fb. This limit constrains the threshold quantum black-hole mass to be above 5.3 TeV in the model considered.

A silicon carbide room-temperature single-photon source

Over the past few years, single-photon generation has been realized in numerous systems: single molecules, quantum dots, diamond colour centres and others. The generation and detection of single photons play a central role in the experimental foundation of quantum mechanics and measurement theory. An efficient and high-quality single-photon source is needed to implement quantum key distribution, quantum repeaters and photonic quantum information processing. Here we report the identification and formation of ultrabright, room-temperature, photostable single-photon sources in a device-friendly material, silicon carbide (SiC). The source is composed of an intrinsic defect, known as the carbon antisite-vacancy pair, created by carefully optimized electron irradiation and annealing of ultrapure SiC. An extreme brightness (2×10(6) counts s(-1)) resulting from polarization rules and a high quantum efficiency is obtained in the bulk without resorting to the use of a cavity or plasmonic structure. This may benefit future integrated quantum photonic devices.

Search for dark matter in events with a hadronically decaying W or Z boson and missing transverse momentum in pp collisions at √s=8 TeV with the ATLAS detector

A search is presented for dark matter pair production in association with a W or Z boson in pp collisions representing 20.3  fb(-1) of integrated luminosity at √s=8  TeV using data recorded with the ATLAS detector at the Large Hadron Collider. Events with a hadronic jet with the jet mass consistent with a W or Z boson, and with large missing transverse momentum are analyzed. The data are consistent with the standard model expectations. Limits are set on the mass scale in effective field theories that describe the interaction of dark matter and standard model particles, and on the cross section of Higgs production and decay to invisible particles. In addition, cross section limits on the anomalous production of W or Z bosons with large missing transverse momentum are set in two fiducial regions.

Measurement of jet shapes in top-quark pair events at [Formula: see text] using the ATLAS detector

A measurement of jet shapes in top-quark pair events using 1.8 fb-1 of [Formula: see text]pp collision data recorded by the ATLAS detector at the LHC is presented. Samples of top-quark pair events are selected in both the single-lepton and dilepton final states. The differential and integrated shapes of the jets initiated by bottom-quarks from the top-quark decays are compared with those of the jets originated by light-quarks from the hadronic W-boson decays [Formula: see text] in the single-lepton channel. The light-quark jets are found to have a narrower distribution of the momentum flow inside the jet area than b-quark jets.

Measurement of top quark polarization in top-antitop events from proton-proton collisions at √s=7 TeV using the ATLAS detector

This Letter presents measurements of the polarization of the top quark in top-antitop quark pair events, using 4.7  fb(-1) of proton-proton collision data recorded with the ATLAS detector at the Large Hadron Collider at √s=7  TeV. Final states containing one or two isolated leptons (electrons or muons) and jets are considered. Two measurements of α(ℓ)P, the product of the leptonic spin-analyzing power and the top quark polarization, are performed assuming that the polarization is introduced by either a CP conserving or a maximally CP violating production process. The measurements obtained, α(ℓ)P(CPC)=-0.035±0.014(stat)±0.037(syst) and α(ℓ)P(CPV)=0.020±0.016(stat)(-0.017)(+0.013)(syst), are in good agreement with the standard model prediction of negligible top quark polarization.