Molecular geochemistry of radium: A key to understanding cation adsorption reaction on clay minerals

Adsorption reactions of various cations on clay minerals have different effects on their environmental behaviors depending on the molecular-scale adsorption structure. Some cations form outer-sphere complexes via hydration, while others create inner-sphere complexes through dehydration. This preference dictates their environmental impact. However, the factors controlling these complex formations remain unclear. Furthermore, research on the adsorption preferences of radium (Ra) is lacking. Thus, this study conducted the first EXAFS study of Ra2+ adsorbed on clay minerals and showed that Ra2+ forms inner-sphere complexes on vermiculite, which can be surprising because Ra2+ is a divalent cation and prefers to be hydrated. In order to investigate the factors controlling the complex formations, this study conducted systematic EXAFS measurements and DFT calculations for alkali and alkaline earth metal cations. The results showed the importance of the size-matching effect between the adsorbed cation and the cavity of the tetrahedral sheets and that the complex formation can be estimated by the combination of the ionic radius and hydration enthalpy of the adsorbed cation. Furthermore, this study also analyzed environmental core samples. Their results showed the fixation of Ra2+ by clay minerals and the controlling factors can effectively predict cation environmental behavior.

Extraction of Se(iv) and Se(vi) from aqueous HCl solution by using a diamide-containing tertiary amine

Here, we investigated the mechanism underlying the extraction of Se(iv) and Se(vi) from aqueous HCl solutions by N-2-ethylhexyl-bis(N-di-2-ethylhexyl-ethylamide)amine (EHBAA). In addition to examining extraction behavior, we also elucidated structural properties of the dominant Se species in solution. Two types of aqueous HCl solutions were prepared by dissolving a Se^IV oxide or a Se^VI salt. X-ray absorption near edge structure analyses revealed that Se(vi) was reduced to Se(iv) in 8 M HCl. Using 0.5 M EHBAA, ∼50% of Se(vi) was extracted from 0.5 M HCl. In contrast, Se(iv) was hardly extracted from 0.5 to 5 M HCl; however, at molar concentrations above 5 M, the extraction efficiency of Se(iv) increased drastically, reaching ∼85%. Slope analyses for the distribution ratios of Se(iv) in 8 M HCl and Se(vi) in 0.5 M HCl showed that apparent stoichiometries of Se(iv) or Se(vi) to EHBAA were 1 : 1 and 1 : 2, respectively. Extended X-ray absorption fine structure measurements revealed that the inner-sphere of the Se(iv) and Se(vi) complexes extracted with EHBAA was [SeOCl₂] and [SeO₄]^2-, respectively. Together, these results indicate that Se(iv) is extracted from 8 M HCl with EHBAA via a solvation-type reaction, whereas Se(vi) is extracted from 0.5 M HCl via an anion-exchange-type reaction.

EXAFS spectroscopy measurements and ab initio molecular dynamics simulations reveal the hydration structure of the radium(II) ion

Radium is refocused from the viewpoint of an environmental pollutant and cancer therapy using alpha particles, where it mainly exists as a hydrated ion. We investigated the radium hydration structure and the dynamics of water molecules by extended X-ray absorption fine structure (EXAFS) spectroscopy and ab initio molecular dynamics (AIMD) simulation. The EXAFS experiment showed that the coordination number and average distance between radium ion and the oxygen atoms in the first hydration shell are 9.2 ± 1.9 and 2.87 ± 0.06 Å, respectively. They are consistent with those obtained from the AIMD simulations, 8.4 and 2.88 Å. The AIMD simulations also revealed that the water molecules in the first hydration shell of radium are less structured and more mobile than those of barium, which is an analogous element of radium. Our results indicate that radium can be more labile than barium in terms of interactions with water.

•

Extended X-ray absorption fine structure (EXAFS) measurement revealed the hydration structure of radium ion

•

Ab initio molecular dynamics (AIMD) simulation brought consistent results

•

AIMD revealed the structural and dynamic properties of the water molecules

•

The hydration structure of radium ion is more labile than that of barium ion

Lanthanide extraction using a thiodiglycolamic acid extractant: effect of S-donor on lanthanide separation

Liquid-liquid extraction of lanthanide (Ln) ions was investigated using N,N-dioctylthiodiglycolamic acid (DOTDGAA), which is a sulfur donor ligand with an amide group and a carboxyl group connected by a thioether chain. The extraction performance and selectivity of DOTDGAA for Ln ions were compared with those of N,N-dioctyldiglycolamic acid (DODGAA), which is also an oxygen donor ligand with a similar chemical structure, to assess the effect of the soft/hard donor atom on Ln separation. DOTDGAA quantitatively extracted all Ln ions while being selective toward the light and middle Ln ions, in contrast to the selectivity of DODGAA for heavier Ln ions. Slope analysis demonstrated that the Ln³⁺ transfer using DOTDGAA proceeded through a proton-exchange reaction, forming a 1:3 complex, Ln(DOTDGAA)₃. The back-extraction of Ln ions from the extracting phase was successfully achieved under acidic conditions.

Marking actinides for separation: Resonance-enhanced multiphoton charge transfer in actinide complexes

Precise separation and purification of f-block elements are important and challenging especially for the reduction of nuclear waste and the recycling of rare metals but are practically difficult mainly because of their chemical similarity. A promising way to overcome this difficulty is controlling their oxidation state by nonchemical processes. Here, we show resonance-enhanced multiphoton charge transfer in actinide complexes, which leads to element-specific control of their oxidation states owing to the distinct electronic spectra arising from resonant transitions between f orbitals. We observed oxidation of trivalent americium in nitric acid. In addition, we found that the coordination of nitrates is essential for promoting the oxidation reaction, which is the first finding ever relevant to the primary process of photoexcitation via resonant transitions of f-block elements. The resonance-enhanced photochemical process could be used in the nuclear waste management, as it would facilitate the mutual separation of actinides, such as americium and curium.

Sr(ii) extraction by crown ether in HFC: entropy driven mechanism through H2PFTOUD

The solvent extraction of Sr(ii) was carried out using dicyclohexano-18-crown-6 (DCH18C6) and two HFC mixed solvents MS1 and MS2, where MS1 was composed of 30/60 (w/w)% trans-1,2-dichloroethylene/HFC-43 (HFC-43: 1,1,1,2,2,3,4,5,5,5-decafluoropentane) and MS2 was 5/95 (w/w)% heptane/HFC-43. Nitric acid and perfuruoro-3-6-9-trioxaundecane-1,11-dioic acid (H₂PFTOUD) were used to study the effect of acid on the extraction. The maximum distribution ratio of Sr(ii) (D_Sr) observed for H₂PFTOUD conditions was ∼180, and >10 times larger than aqueous nitric acid conditions. The D_Sr value was influenced by concentrations of the DCH18C6, Sr(ii), and acid, and by temperature. The composition of extracted complexes was estimated using slope analysis as an Sr(ii)–anion–DCH18C6 ratio of ∼1 : 2 : 1. From the extended X-ray absorption fine structure (EXAFS) measurements of Sr(ii) in the aqueous and organic phases, it is inferred that regardless of the acid used, DCH18C6 coordinates to the first coordination sphere of the Sr(ii) extracted complexes and Sr(ii) is hydrated (complexation with H₂PFTOUD cannot be distinguished) in the aqueous phase. Thermodynamic data were significantly changed by choice of acid, i.e., both enthalpy and entropy values were negative for nitric acid conditions, on the other hand, entropy values were large and positive for H₂PFTOUD conditions. These results have demonstrated that the combination of HFC solvent and crown ether is applicable for metal extraction.

The solvent extraction of Sr(ii) was carried out using DCH18C6, and two HFC mixed solvents composed of organic solvents and HFC-43 (HFC-43: 1,1,1,2,2,3,4,5,5,5-decafluoropentane), and two acids (nitric acid and H₂PFTOUD).

Study on Phenanthroline Carboxamide for Lanthanide Separation: Influence of Amide Substituents

Phenanthroline carboxamide compounds are promising for lanthanide intra-series separation. This paper presents a study on the effect of structure modification of phenanthroline carboxamides on the extraction of the whole lanthanide series. The study consists of theoretical calculations, extraction experiments of the 14 stable lanthanides, and extended X-ray absorption fine structure (EXAFS) analyses of Nd and Dy complexes. Tridentate monocarboxamides and tetradentate dicarboxamides show different trends in series extraction, although both preferentially extract the light lanthanides. The amide substituents, although not directly coordinating the metal ions, were also found to impact the distribution ratio, most probably due to a modification in the internal polarity of the molecules. This latter effect, if extrapolated to other nitrogen-based ligands such as pyridines or triazines, can be used to further fine-tune extractants for a process improvement.

Speciation and separation of platinum(iv) polynuclear complexes in concentrated nitric acid solutions

Understanding the solution chemistry of Pt(iv) is crucial for the hydrometallurgy of precious metals. To gain such an understanding, the speciation and separation of Pt(iv) complexes in concentrated HNO₃ solutions were investigated via Pt L_III edge X-ray absorption fine structure (XAFS) spectroscopy. The XAFS results for concentrated HNO₃ solutions of Na₂Pt(OH)₆ revealed the dominant presence of Pt polynuclear complexes, wherein the formation of Pt(iv) polynuclear complexes depended on the metal concentration and the Na₂Pt(OH)₆ dissolution temperature. The dominant species present in a heated nitrate solution of 0.90 g-Pt L^-1 and a non-heated nitrate solution of 3.2 g-Pt L^-1 were dinuclear Pt(iv) complexes, whereas those in a heated solution of 3.0 g-Pt L^-1 were predominantly larger polynuclear complexes, such as, tetra- and hexa-nuclear complexes. The presence of larger Pt(iv) complexes was confirmed via XAFS spectroscopy, wherein the adsorption of Pt(iv) ions from a 10 M HNO₃ solution by a chelating resin functionalised with iminodiacetic acid and a strongly basic anion-exchange resin bearing trimethyl ammonium nitrate was examined. The adsorption of 50 mg L^-1 of Pt(iv) by the two resins was tested using aqueous solutions diluted from heated HNO₃ solutions with varying metal concentrations, and also from a non-heated solution. We found that Pt(iv) complexes from heating solutions containing high Pt(iv) concentrations displayed high adsorption percentages. In addition, the selective adsorption of Pt(iv) over Pd(ii), Ag(i), Cu(ii), Ni(ii), and Fe(iii) from a 10 M HNO₃ solution was achieved using a strongly basic anion-exchange resin.

Solvent Extraction of Technetium(VII) and Rhenium(VII) Using a Hexaoctylnitrilotriacetamide Extractant

Liquid-liquid extraction for the removal of pertechnetate (⁹⁹TcO₄^-) and perrhenate (ReO₄^-) is reported based on using the tripodal extractant N,N,N',N',N″,N″-hexa-n-octylnitrilotriacetamide (HONTA) composed of three amide groups and a tertiary amine. The extraction behaviors were compared with those using alkyldiamideamines (ADAAM(Oct) and ADAAM(EH)), and the commercial amine-type extractant, trioctylamine (TOA). HONTA quantitatively extracted ⁹⁹TcO₄^- and ReO₄^- in the pH range from 1.0 to 2.5 by the co-extraction of protons. The extraction performance of the extractants was improved in the order of HONTA > ADAAM(Oct) > ADAAM(EH) > TOA. ⁹⁹TcO₄^- and ReO₄^- in the extracting phase were successfully stripped using neutral aqueous solutions as the receiving phase, and the extraction ability of HONTA was maintained after five repeated uses.

Unique Anion-exchange Properties of 3,3'-Diaminobenzidine Resulting in High Selectivity for Rhodium(III) over Palladium(II) and Platinum(IV) in a Concentrated Hydrochloric Acid Solution

The effective recovery of Rh(III) from mixtures also containing Pd(II) and Pt(IV) is one of the most difficult tasks in platinum group metal refining. Adding 3,3'-diaminobenzidine (DAB) to 7 and 10 M HCl aqueous solutions containing Rh(III), Pd(II), and Pt(IV) chlorido species affords the effective separation of Rh(III) from Pd(II) and Pt(IV) through a process where Rh(III) becomes sequestered into solid phases composed of DAB. The stoichiometry and inner coordination sphere of the metal in Rh-DAB complexes were determined by estimating the Rh(III), H⁺, and Cl^- concentrations in the solid phase and X-ray absorption fine structure measurements to clarify the mechanism of DAB selectivity for Rh(III). These results indicate that the Rh-DAB reaction in a concentrated HCl solution occurs in two steps: (1) the precipitation of DAB trihydrochloride salts, where DAB's amino groups are protonated and (2) anion exchange of the trihydrochloride salts for chloride ions with [RhCl₆]^3-, which is the predominant species in a concentrated HCl solution. By contrast, ion-pair complexes with [PdCl₄]^2- and [PtCl₆]^2- were not observed in DAB phases. The significantly lower affinity of the DAB trihydro cation for [PtCl₆]^2- and [PdCl₄]^2- than for [RhCl₆]^3- in 7 and 10 M HCl solutions accounts for the effective separation of Rh(III) from Pd(II) and Pt(IV).

Nosyl (2-Nitrobenzenesulfonyl) Annulation Strategy toward Winding Vine-Shaped Bithiophenes

Winding vine-shaped bithiophene was synthesized through the nosyl (2-nitrobenzenesulfonyl) cyclization protocol. The reaction of bithiophene bearing bromomethyl groups at the 3,3'-positions with nosylated 1,2-ethylenediamine in the presence of potassium carbonate afforded the annulated product in excellent yield. The obtained bithiophene was found to contain a 10-membered ring, which was confirmed by X-ray analysis. The related nosyldiamine bearing a tri- or tetramethylene group also reacted in a similar manner, affording an 11- or 12-membered macrocycle, respectively.

Cesium desorption behavior of weathered biotite in Fukushima considering the actual radioactive contamination level of soils

For the better understanding of radioactive contamination in Fukushima Prefecture at present and in future, Cs desorption experiments have been conducted mainly using weathered biotite (WB) collected from Fukushima Prefecture and considering the actual contamination level (∼10^-10 wt%) of radiocesium in Fukushima Prefecture. In the experiments, ¹³⁷Cs sorbed to WB by immersing in ¹³⁷Cs solution for one day was mostly desorbed by solutions of 1 M NaNO₃, 1 M LiNO₃, 10^-1 M HCl, and 10^-1 M HNO₃, although it was barely desorbed by 1 M KNO₃, 1 M CsNO₃, 1 M NH₄NO₃, and natural seawater. X-ray diffraction analysis of WB after immersing in these solutions suggested that the collapse of the hydrated interlayers in WB suppressed the desorption of Cs. On the other hand, ¹³⁷Cs was barely desorbed from WB even by the treatments with solutions of NaNO₃ and LiNO₃ if the duration for the sorption was longer than approximately two weeks, as well as radioactive WB collected from actual contaminated soils in Fukushima Prefecture. This result implies that Cs sorbed in WB became more strongly fixed with time. Probably removal of radiocesium sorbed in weathered granitic soil at Fukushima Prefecture is difficult by any electrolyte solutions, as more than seven years have passed since the accident.

Mechanisms of Se(IV) Co-precipitation with Ferrihydrite at Acidic and Alkaline Conditions and Its Behavior during Aging

Understanding the form of Se(IV) co-precipitated with ferrihydrite and its subsequent behavior during phase transformation is critical to predicting its long-term fate in a range of natural and engineered settings. In this work, Se(IV)-ferrihydrite co-precipitates formed at different pH were characterized with chemical extraction, transmission electron microscopy (TEM), and X-ray absorption spectroscopy (XAS) to determine how Se(IV) is associated with ferrihydrite. Results show that despite efficient removal, the mode and stability of Se(IV) retention in the co-precipitates varied with pH. At pH 5, Se(IV) was removed dominantly as a ferric selenite-like phase intimately associated with ferrihydrite, while at pH 10, it was mostly present as a surface species on ferrihydrite. Similarly, the behavior of Se(IV) and the extent of its retention during phase transformation varied with pH. At pH 5, Se(IV) remained completely associated with the solid phase despite the phase change, whereas it was partially released back into solution at pH 10. Regardless of this difference in behavior, TEM and XAS results show that Se(IV) was retained within the crystalline post-aging products and possibly occluded in nanopore and defect structures. These results demonstrate a potential long-term immobilization pathway for Se(IV) even after phase transformation. This work presents one of the first direct insights on Se(IV) co-precipitation and its behavior in response to iron phase transformations.

Proposed Cesium-free Mineralization Method for Soil Decontamination: Demonstration of Cesium Removal from Weathered Biotite

The removal possibility of sorbed Cs from weathered biotite (WB), which is considered a major Cs adsorbent in the soil of Fukushima, has been investigated by the addition of an NaCl-CaCl₂ mixed salt powder with a 1:1 ratio of Na and Ca and subsequent heat treatment under a reduced pressure of 14 Pa. X-ray fluorescence analysis was used to determine the Cs removal rate at elevated temperatures. The structural changes and new phases formed were determined using powder X-ray diffraction as well as electron diffraction and X-ray microanalysis in a transmission electron microscope. We found that Cs was completely removed from the specimen heated at 700 °C, where WB completely decomposed and augite was formed. On the basis of this finding, we propose the Cs-free mineralization method as a new soil-decontamination process in which Cs minerals are transformed by heating with certain additives into minerals that cannot incorporate Cs.

Comparison of the Extractabilities of Tetrachloro- and Tetrabromopalladate(II) Ions with a Thiodiglycolamide Compound

Using N,N,N',N'-tetra-2-ethylhexyl-thiodiglycolamide (TEHTDGA) in n-dodecane as the extractant, we compared the percentages of Pd(II) extracted from HCl and HBr solutions, and analyzed the structures of the Pd(II)-extractant complexes. For comparison, similar experiments were performed with di-n-hexyl sulfide (DHS), a well-known sulfide-type extractant. TEHTDGA extracted Pd(II) from both HCl and HBr solutions much faster than DHS. The Pd(II)/(TEHTDGA or DHS) stoichiometry in the organic phase was 1:2. For TEHTDGA, the extractability of Pd(II) from HBr solution was inferior to that from HCl solution, whereas the opposite was true for DHS. However, FT-IR spectroscopy and EXAFS measurements indicated that the inner-sphere structure of Pd(II) in the TEHTDGA complex was almost the same as that in the DHS system: in both cases, two of the halide ions in the tetrachloro- or tetrabromopalladate(II) ion were replaced by the sulfur atoms of two extractant molecules.

A novel method for remediation of nickel containing wastewater at neutral conditions

Heavy metals contained in wastewater are generally removed by adding antalkaline to increase the pH, and Ni is commonly precipitated as Ni-hydroxides at pH 10. However, a more sustainable remediation method of treatment at neutral conditions would be attractive due to the high cost of chemical reagents and inefficient treatment at present. Based on natural attenuation, the method of adding Al ions has been used in wastewater treatment to precipitate layered double hydroxides (LDH). Here, we investigated the use of Al ion addition in the Ni containing wastewater treatment, experimentally and thermodynamically. By co-precipitation experiments adding Al ions to Ni-containing water, Ni was selectively incorporated into the structure of LDH, and the removal efficiency of Ni was close to 100% even in pH 7 and 8 samples (lower pH than conventional methods) with initial Ni concentrations of 200-10,000mg/L. Geochemical modeling results replicate the experimental results well when the Al/Ni ratio of LDH is assumed to be 0.33. This model makes it possible to estimate the amount of Al ions and additive agents necessary for use in treatment of wastewater containing different Ni concentrations.

Mechanism of Cs Removal from Fukushima Weathered Biotite by Heat Treatment with a NaCl-CaCl2 Mixed Salt

An in situ extended X-ray absorption fine structure (in situ EXAFS) spectroscopic analysis at high temperature was conducted to investigate the mechanism of Cs removal from weathered biotite (WB) from Fukushima, induced by heating with a mixed salt of NaCl and CaCl₂. This indicated that most Cs remained in WB during heating at 200-700 °C. In addition, the in situ EXAFS spectra gradually changed on heating with the mixed salt and a completely different spectrum was observed for the sample after cooling from 700 °C to room temperature (RT). Ex situ EXAFS measurements and X-ray fluorescence analyses were also conducted on samples after heat treatment and removal of the mixed salt to clarify the temperature dependence of the Cs removal ratio. On the basis of the results of radial structure function analysis obtained from in situ EXAFS, we concluded that almost all of the Cs was removed from WB by heating at 700 °C with the mixed salt, and that Cs formed Cs-Cl bonds after cooling to RT from 700 °C. In contrast, although more than half of the Cs present was removed from WB by heat treatment at 500 °C, most Cs was surrounded by silica tetrahedrons, maintained by Cs-O bonds. On the basis of these results, different Cs removal processes are suggested for the high-temperature (600-700 °C) and low-temperature (400-500 °C) regions.

Extraction of Lanthanide and Actinide Ions from Aqueous Mixtures Using a Carboxylic Acid-Functionalized Porous Aromatic Framework

Porous aromatic frameworks (PAFs) incorporating a high concentration of acid functional groups possess characteristics that are promising for use in separating lanthanide and actinide metal ions, as required in the treatment of radioactive waste. These materials have been shown to be indefinitely stable to concentrated acids and bases, potentially allowing for multiple adsorption/stripping cycles. Additionally, the PAFs combine exceptional features from MOFs and inorganic/activated carbons giving rise to tunable pore surfaces and maximum chemical stability. Herein, we present a study of the adsorption of selected metal ions, Sr(2+), Fe(3+), Nd(3+), and Am(3+), from aqueous solutions employing a carbon-based porous aromatic framework, BPP-7 (Berkeley Porous Polymer-7). This material displays high metal loading capacities together with excellent adsorption selectivity for neodymium over strontium based on Langmuir adsorption isotherms and ideal adsorbed solution theory (IAST) calculations. Based in part upon X-ray absorption spectroscopy studies, the stronger adsorption of neodymium is attributed to multiple metal ion and binding site interactions resulting from the densely functionalized and highly interpenetrated structure of BPP-7. Recyclability and combustibility experiments demonstrate that multiple adsorption/stripping cycles can be completed with minimal degradation of the polymer adsorption capacity.

A Reliable Hybrid Adsorbent for Efficient Radioactive Cesium Accumulation from Contaminated Wastewater

Cesium (Cs) removal from nuclear liquid wastewater has become an emerging issue for safeguarding public health after the accident at the Fukushima Daiichi Nuclear Power Plant. A novel macrocyclic ligand of o-benzo-p-xylyl-22-crown-6-ether (OBPX22C6) was developed and successfully immobilized onto mesoporous silica for the preparation of hybrid adsorbent. The benzene ring π electron is the part of crown ether of OBPX22C6 for easy orientation of the macrocyclic compound for making the π electron donation with Cs complexation. The potential and feasibility of the hybrid adsorbent as being Cs selective was evaluated in terms of sensitivity, selectivity and reusability. The results clarified that the Cs removal process was rapid and reached saturation within a short time. Considering the effect of competitive ions, sodium (Na) did not markedly affect the Cs adsorption whereas potassium (K) was slightly affected due to the similar ionic radii. However, the oxygen in long ethylene glycol chain in OBPX22C6 was expected to show strong coordination, including Cs-π interaction with Cs even in the presence of the high amount of K and Na. Due to its high selectivity and reusability, significant volume reduction is expected as this promising hybrid adsorbent is used for Cs removal in Fukushima wastewater.

Ultimate selenium(IV) monitoring and removal from water using a new class of organic ligand based composite adsorbent

This work reports the selenium (Se(IV)) detection and removal from water by ligand functionalized organic-inorganic based novel composite adsorbent. The composite adsorbent was prepared by direct immobilization of N,N'-di(3-carboxysalicylidene)-3,4-diamino-5-hydroxypyrazole onto the mesoporous silica monolith. The adsorbent exhibited distinct color change in the presence of various concentrations of Se(IV). This was characterized by UV-vis spectroscopy, and the color change was observed by naked-eye observation. The detection limit was determined to be 1.14 μg/L. The effect of solution pH, interferential metal ions, contact time, initial Se(IV) concentration, and adsorbent regeneration were evaluated. The maximum sorption capacity was determined based on the initial concentration. The data fitted well to the Langmuir isotherm model, and the maximum Se(IV) sorption capacity was 111.12 mg/g. The presence of diverse competing ions did not affect the Se(IV) sorption capacity, and the adsorbent had almost no sorption capacity for these coexisting ions, which suggests the high selectivity to Se(IV) ions. The adsorbed Se(IV) was eluted with suitable eluent (0.10 M NaOH) and simultaneously regenerated into the initial form for the next operation. The excellent reusability of the adsorbent was justified after eight consecutive sorption-elution-regeneration cycles. The proposed adsorbent is cost-effective and environmentally friendly and a potential candidate for treatment of water containing Se(IV).

Mesoscopic structures of vermiculite and weathered biotite clays in suspension with and without cesium ions

The effect of cesium (Cs) adsorption on the mesoscopic structure of the clay minerals vermiculite and weathered biotite (WB) in suspensions was elucidated by small-angle X-ray scattering (SAXS). The clay minerals form multilayered structures, and the Cs cations (Cs(+)) are strongly adsorbed in the interlayer space of the soil clays, in particular vermiculite and WB. SAXS was used to monitor the relationship between Cs(+) adsorption at the clay interlayers and the structural changes at length scales from 1 to 1000 Å. The variation in the distance between the neighboring clay sheets and the spatial arrangement of the clay sheets with and without Cs(+) were clarified. Our quantitative analyses revealed that the number of stacked layers of pure vermiculite was decreased by Cs(+) addition, whereas that of WB increased. Moreover, the average distance between the neighboring layers of vermiculite in suspension was larger than that of WB, which reflects the different conditions of Cs(+) intercalation. These findings provide fundamental insights that are important for predicting the environmental fate of radioactive Cs in contaminated regions and for developing methods for extracting Cs from soil.

Speciation of radioactive soil particles in the Fukushima contaminated area by IP autoradiography and microanalyses

Radioactive soil particles several tens of micrometers in size were collected from litter soil in the radiation contaminated area by the Fukushima nuclear plant accident and characterized using electron and X-ray microanalyses. The radioactive particles were discriminated by autoradiography using imaging plates (IP) on which microgrids were formed by laser ablation in order to find the particles under microscopy. Fifty radioactive particles were identified and classified into three types from their morphology and chemical composition, namely: (1) aggregates of clay minerals, (2) organic matter containing clay mineral particulates, and (3) weathered biotite originating from local granite. With respect to the second type, dissolution of the organic matter did not reduce the radiation, suggesting that the radionuclides were also fixed by the clay minerals. The weathered biotite grains have a plate-like shape with well-developed cleavages inside the grains, and kaolin group minerals and goethite filling the cleavage spaces. The reduction of the radiation intensity was measured before and after the trimming of the plate edges using a focused ion beam (FIB), to examine whether radioactive cesium primarily sorbed at frayed edges. The radiation was attenuated in proportion to the volume decrease by the edge trimming, implying that radioactive cesium was sorbed uniformly in the porous weathered biotite.

Collective structural changes in vermiculite clay suspensions induced by cesium ions

Following the Fukushima Daiichi nuclear disaster in 2011, Cs radioisotopes have been dispersed over a wide area. Most of the Cs has remained on the surface of the soil because Cs(+) is strongly adsorbed in the interlayer spaces of soil clays, particularly vermiculite. We have investigated the microscopic structure of an aqueous suspension of vermiculite clay over a wide length scale (1-1000 Å) by small-angle X-ray scattering. We determined the effect of the adsorption behavior of Cs(+) on the structural changes in the clay. It was found that the abruption of the clay sheets was induced by the localization of Cs(+) at the interlayer. This work provides important information for predicting the environmental fate of radioactive Cs in polluted areas, and for developing methods to extract Cs from the soil and reduce radioactivity.

Selective cesium removal from radioactive liquid waste by crown ether immobilized new class conjugate adsorbent

Conjugate materials can provide chemical functionality, enabling an assembly of the ligand complexation ability to metal ions that are important for applications, such as separation and removal devices. In this study, we developed ligand immobilized conjugate adsorbent for selective cesium (Cs) removal from wastewater. The adsorbent was synthesized by direct immobilization of dibenzo-24-crown-8 ether onto inorganic mesoporous silica. The effective parameters such as solution pH, contact time, initial Cs concentration and ionic strength of Na and K ion concentrations were evaluated and optimized systematically. This adsorbent was exhibited the high surface area-to-volume ratios and uniformly shaped pores in case cavities, and its active sites kept open functionality to taking up Cs. The obtained results revealed that adsorbent had higher selectivity toward Cs even in the presence of a high concentration of Na and K and this is probably due to the Cs-π interaction of the benzene ring. The proposed adsorbent was successfully applied for radioactive Cs removal to be used as the potential candidate in Fukushima nuclear wastewater treatment. The adsorbed Cs was eluted with suitable eluent and simultaneously regenerated into the initial form for the next removal operation after rinsing with water. The adsorbent retained functionality despite several cycles during sorption-elution-regeneration operations.

Local Structure of Molten CdCl2 Systems

The local structure of molten CdCl2 was investigated by X-ray absorption fine structure (XAFS) and X-ray diffraction(XRD) analyses. The nearest Cd2+-Cl− distance decreases from 2.61 Å in the room temperature solid state to 2.47 - 2.50 Å in the molten state. The coordination number decreases from 6 in the solid to 4 in the melt. The obtained structural parameters from the XAFS and the XRD analyses suggest that a tetrahedral coordination (CdCl4)2− is predominant in molten CdCl2. The XAFS result of a molten 50%CdCl2-KCl mixture shows that the 4-fold (CdCl4)2− structure holds also in the mixture

Selective lanthanide sorption and mechanism using novel hybrid Lewis base (N-methyl-N-phenyl-1,10-phenanthroline-2-carboxamide) ligand modified adsorbent

This study aims to develop a highly selective Lewis base adsorbent to investigate the selective sorption and recovery of Eu(III) and Sm(III) from wastewater. The oxygen and nitrogen donor atoms containing Lewis base N-methyl-N-phenyl-1,10-phenanthroline-2-carboxamide (MePhPTA) ligand was synthesized and subsequently an adsorbent was prepared by direct immobilization onto mesoporous silica. Determined maximum adsorption capacities were 125.63 and 124.38 mg/g for Eu(III) and Sm(III), respectively. Experiments with mixed-cations solutions showed that the sequence of preferential adsorption was Eu(III)>Sm(III). The lanthanide sorption by hybrid Lewis base adsorbent (HyLBA) was not adversely affected by the presence of sodium, potassium, calcium, magnesium, chloride, sulfate and nitrate ions due to strong affinity between hard Lewis acid lanthanide and hard Lewis base adsorbent. The crystallography for the Sm-MePhPTA complex suggested that MePhPTA was strongly coordinated to Sm(III) with oxygen and nitrogen by forming a stable complex with two 5-membered rings. The data clarified that bond lengths between Sm(III) and amide oxygen (2.475Å) were shorter than SmN (2.662Å) in phenanthroline moiety indicating strong oxygen driven HyLBA. The results suggested that HyLBA has a good prospect of promising applications for separation/sorption of lanthanide ions from effluents.

Hydrolysis of tetravalent cerium for a simple route to nanocrystalline cerium dioxide: an in situ spectroscopic study of nanocrystal evolution

Despite the rapid developments in recent nanocrystal research and their expanding applications, the evolution mechanism of nanocrystals remains veiled for the most part due to the lack of appropriate analytical techniques. Here we demonstrate one promising multi-spectroscopic approach for the in situ investigation of nanocrystal evolution. That is, the formation of nanocrystalline cerium dioxide (NC-CeO2) has been probed by dynamic light scattering (DLS), X-ray absorption spectroscopy (XAS) and high-energy X-ray scattering (HEXS). The obtained results indicate that the fine colloidal particles of NC-CeO2 are formed in an acidic aqueous solution simply through the hydrolysis of the initial precursor of small oligomer Ce(IV) species. This information on how NC-CeO2 evolves is fundamental to simplifying and alleviating the synthetic strategy for NC-CeO2 production.