Merging gold plasmonic nanoparticles and L-proline inside a MOF for plasmon-induced visible light chiral organocatalysis at low temperature

Light-driven asymmetric photocatalysis represents a straightforward approach in modern organic chemistry. In comparison to the homogeneous one, heterogeneous asymmetric photocatalysis has the advantages of easy catalyst separation, recovery, and reuse, thus being cost- and time-effective. Here, we demonstrate how plasmon-active centers (gold nanoparticles - AuNPs) allow visible light triggering of chiral catalyst (proline) in model aldol reaction between acetone and benzaldehyde. The metal-organic framework UiO-66-NH2 was used as an advanced host platform for the loading of proline and AuNPs and their stabilization in spatial proximity. Aldol reactions were carried out at a low temperature (-20 °C) under light illumination which resulted in 91% ee with a closed-to-quantitative yield, 4.5 times higher than that without light (i.e. in the absence of plasmon triggering). A set of control experiments and quantum chemical modeling revealed that the plasmon assistance proceeds through hot electron excitation followed by an interaction with an enamine with the formation of anion radical species. We also demonstrated the high stability of the proposed system in multiple catalytic cycles without leaching metal ions, which makes our approach especially promising for heterogeneous asymmetric photocatalysis.

Bioinspired superhydrophobic SERS substrates for machine learning assisted miRNA detection in complex biomatrix below femtomolar limit

Surface-enhanced Raman spectroscopy (SERS) is an analytical method with high potential in the field of medicine. The design of SERS substrates, based on specific morphology and/or chemical modification, allow the recognition of the presence of specific analytes with precision close to a single-molecule detection limit. However, the SERS analysis of real samples is significantly complicated by the presence of a large number of "minor" molecules that can shield the signal from the target analyte and make it impossible to determine it in practice. In this work, an advanced SERS approach was used for the detection of cancer-related miRNA-21 in blood plasma, used as a molecular model background. The approach was based on the combination of the biomimetic plasmon-active SERS substrate, its tuned surface chemistry and advanced SERS data analysis, making use of artificial machine learning. In the first step, biomimetic SERS substrates were created using a butterfly wing as a starting template. The substrates were covered by thin Au layer and covalently grafted with hydrophobic chemical moieties to introduce superhydrophobic and water-adhesive properties. The self-concentration of the analyte on the substrates was achieved by minimizing the contact area between the analyte drop and the substrate, which is facilitated by surface superhydrophobicity and additionally enhanced by drop evaporation on the flipped over substrate. Due to the presence of cancer miRNA and blood plasma background, the measured SERS spectra represent a complex of interfering peaks. Thus, their interpretation was carried out using a specially trained machine learning model. As a result, reliable and repeatable quantitative detection of miRNAs below the femtomolar level (up to 10-16 M) on the background of human blood plasma becomes possible.

Proton exchange membrane with plasmon-active surface for enhancement of fuel cell effectivity

The action of fuel cells with proton-exchanged membranes (PEMs) requires the implementation of the hydrogen oxidation reaction (HOR) and the oxygen reduction reaction (ORR) on the opposite sides of the PEMs. Recently, based on several models of electrochemical reactions a significant decrease in the thermodynamic activation barrier of both reactions under plasmon assistance was reported. In this work, we propose the design of a PEM fuel cell with a plasmon-active catalytic surface providing plasmonic triggering and enhancement of fuel cell efficiency. In particular, we deposited bimetallic (Au@Pt) nanostructures on the PEM surface and integrated them into the fuel cell design. Plasmon excitation occurs on the Au nanostructures under light illumination at the corresponding NIR wavelength, while the Pt shell is responsible for the introduction of catalytic sites. Light illumination results in a significant enhancement of the electric current produced by the fuel cell. In particular, the electric current increased several times. Control experiments indicated that the observed enhancement takes place only when the light wavelength is in compliance with the plasmon absorption band and the contribution from thermal effects is negligible. The present approach for the introduction of plasmon assistance into the design of advanced fuel cells makes them suitable for increasing the fuel cell efficiency under sunlight.

Label-free surface-enhanced Raman spectroscopy with artificial neural network technique for recognition photoinduced DNA damage

Taking advantage of surface-enhanced Raman scattering (SERS) methodology with its unique ability to collect abundant intrinsic fingerprint information and noninvasive data acquisition we set up a SERS-based approach for recognition of physically induced DNA damage with further incorporation of artificial neural network (ANN). As a proof-of-concept application, we used the DNA molecules, where the one oligonucleotide (OND) was grafted to the plasmonic surface while complimentary OND was exposed to UV illumination with various exposure doses and further hybridized with the grafted counterpart. All SERS spectra of entrapped DNA were collected by several operators using the portable spectrometer, without any optimization of measurements procedure (e.g., optimization of acquisition time, laser intensity, finding of optimal place on substrate, manual baseline correction, etc.) which usually takes a significant amount of operator's time. The SERS spectra were employed as input data for ANN training, and the performance of the system was verified by predicting the class labels for SERS validation data, using a spectra dataset, which has not been involved in the training process. During that phase, accuracy higher than 98% was achieved with a level of confidence exceeding 95%. It should be noted that utilization of the proposed functional-SERS/ANN approach allows identifying even the minor DNA damage, almost invisible by control measurements, performed with common analytical procedures. Moreover, we introduce the advanced ANN design, which allows not only classifying the samples but also providing the ANN analysis feedback, which associates the spectral changes and chemical transformations of DNA structure.

Metal-organic framework (MOF-5) coated SERS active gold gratings: A platform for the selective detection of organic contaminants in soil

In this work, we proposed the functionalization of a surface plasmon-polariton (SPP)-supported gold grating surface with the metal-organic framework (MOF-5) for sensitive, selective and reproducible surface-enhanced Raman scattering (SERS) detection of organophosphorus pesticides. Homogeneous distribution of plasmon intensity along the Au grating surface ensures the high reproducibility of SERS results (deviation of Raman peak intensity does not exceed the 4% along the sample). The surface-assisted growth of thin MOF-5 film was accomplished in two steps procedure: (i) covalent grafting by 4-carboxyphenyl groups and (ii) the immersion of samples in the mother liquid of MOF-5. Proposed SERS chip proved itself to be a perfect analytical probe for the detection of organophosphorus pesticides with high reliability and low detection limit up to 10^-12 M. Moreover, selective detection and recognition of several relevant organic contaminants (azo-dye, mycotoxin, and pesticide) from the simulated soil was successfully demonstrated. All SERS measurements were performed using portable Raman spectrometer and can easily be expanded to environmental conditions. Our work combines the high affinity of organic contaminants to the MOF-5 with excellent plasmonic excitation on the surface plasmon-polariton supported structure and shows the way to the realization of closed-to-ideal analytical SERS chip.

Vapor Annealing and Colloid Lithography: An Effective Tool To Control Spatial Resolution of Surface Modification

Colloid lithography represents a simple and efficient method for creation of a large-scale template for subsequent surface patterning, deposition of regular metal nanostructures, or periodical surface structures. However, this method is significantly restricted by its ability to create only a limited number of structures with confined geometry and symmetry features. To overcome this limitation, different techniques, such as plasma treatment or tilting angle metal deposition, have been proposed. In this paper, an alternative method based on the vapor annealing of ordered single polystyrene (PS) microspheres layer, followed by the surface grafting with arenediazonium tosylates is proposed. Application of vapor treatment before surface grafting allows effective control of the area screened by PS microspheres. Pristine and vapor-annealed microsphere arrays on the gold substrate were electrochemically modified using ADTs. Subsequent removal of the PS microsphere mask enabled to prepare well-defined nanostructures with controllable surface features. In particular, prepared periodic arrangements were achieved by the grafting of OFGs to the empty interspaces between nanopore arrays. The process of sample preparation was controlled, and the properties of prepared structures were characterized by various techniques, including atomic force microscopy (AFM), conductive AFM, scanning electron microscopy energy-dispersive X-ray spectrometry, Raman spectroscopy, and voltammetry.

Laser patterning of transparent polymers assisted by plasmon excitation

Plasmon-assisted lithography of thin transparent polymer films, based on polymer mass-redistribution under plasmon excitation, is presented. The plasmon-supported structures were prepared by thermal annealing of thin Ag films sputtered on glass or glass/graphene substrates. Thin films of polymethylmethacrylate, polystyrene and polylactic acid were then spin-coated on the created plasmon-supported structures. Subsequent laser beam writing, at the wavelength corresponding to the position of plasmon absorption, leads to mass redistribution and patterning of the thin polymer films. The prepared structures were characterized using UV-Vis spectroscopy and confocal and AFM microscopy. The shape of the prepared structures was found to be strongly dependent on the substrate type. The mechanism leading to polymer patterning was examined and attributed to the plasmon-heating. The proposed method makes it possible to create different patterns in polymer films without the need for wet technological stages, powerful light sources or a change in the polymer optical properties.

Reversible switching of PEDOT:PSS conductivity in the dielectric–conductive range through the redistribution of light-governing polymers

One of the biggest challenges in the field of organic electronics is the creation of flexible, stretchable, and biofavorable materials. Here the simple and repeatable method for reversible writing/erasing of arbitrary conductive pattern in conductive polymer thin film is proposed. The copolymer azo-modified poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) was synthesized to achieve reversible photo-induced local electrical switching in the insulator–semimetal range. The photoisomerization of the polymer was induced by grafting nitrobenzenediazonium tosylate to the PSS main chains. While the as-deposited PEDOT:PSS thin films showed good conductivity, the modification procedure generated polymer redistribution, resulting in an island-like PEDOT distribution and the loss of conductivity. Further local illumination (430 nm) led to the azo-isomerization redistribution of the polymer chains and the creation of a conductive pattern in the insulating polymer film. The created pattern could then be erased by illumination at a second wavelength (470 nm), which was attributed to induction of reverse azo-isomerization. In this way, the reversible writing/erasing of arbitrary conductive patterns in thin polymer films was realized.

Chemical modification of PEDOT:PSS allows grafting light-switchable moieties to PSS chains and light induced reversible tuning of materials conductivity in dielectric-semimetal range.

Gold, Silver and Carbon Nanoparticles Grafted on Activated Polymers for Biomedical Applications

Organic polymers have been applied successfully in fields such as adhesion, biomaterials, protective coatings, friction and wear, composites, microelectronic devices, and thin-film technology. In general, special surface properties with regard to chemical composition, hydrophilicity, roughness, crystallinity, conductivity, lubricity, and cross-linking density are required for the success of these applications. Polymers very often do not possess the surface properties needed for these applications. For these reasons, surface modification techniques which can transform these inexpensive materials into highly valuable finished products have become an important part of the plastics industry. In case of biomedical polymers is plasma treatment used for enhancing cell adhesion, growth and proliferation and to make them suitable for implants and tissue engineering scaffolds. Nanoparticles fascinated scientists for over a century and are now heavily utilized in chemistry, biology, engineering, and medicine. Nowadays nanoparticles can be synthesized reproducibly, modified with seemingly limitless chemical functional groups, and, in certain cases, characterized with atomic-level precision. In recent years, focus has turned to therapeutic possibilities for such materials. Structures, which behave as drug carriers, antimicrobial agents, and photoresponsive therapeutics have been developed and studied in the context of cells and many debilitating diseases. These structures are not simply chosen as alternatives to molecule-based systems, but rather for their new physical and chemical properties, which confer substantive advantages in cellular and medical applications. In this review, we provide insights into immobilization, toxicity and biomedical applications of gold, silver and carbon nanoparticles and discuss their grafting to polymer substrates and the influence on cell-material interactions. The adhesion and the response of cells in contact with the surface play an important role in the cytocompatibility of the implant. It is thus important to understand how cells interact with their environment. The main properties decisive for colonization of a material with cells are surface chemistry, roughness, morphology and polarity, wettability and electrical charge.

Silver Nanoparticles Stabilized Using Chitosan Films: Preparation, Properties and Antibacterial Activity

In this work we present silver nanoparticles coated with chitosan films synthesized by a simple, environmentally friendly method. Silver nanoparticles were prepared and stabilized by reduction of silver nitrate with chitosan without addition of harmful reduction agents. The presence of silver nanoparticles in the solid films was studied by the X-ray diffraction spectroscopy and X-ray photoelectron spectroscopy. Solid films were dissolved and the solution was observed by the ultraviolet-visible spectroscopy and transmission electron microscopy. The amount of silver in the solid samples was studied by atomic absorption spectroscopy. Antibacterial activity of solid films with silver nanoparticles was tested by disc test on two bacterial strains, Gram-positive Staphylococcus epidermidis and Gram-negative Escherichia coli. The presence of silver nanoparticles was confirmed both in solid film and in solution by the above mentioned methods. The films exhibited strong antibacterial activity against both bacterial strains. These films could be used as a wound dressing, antimicrobial packaging material or for long-term storage of silver nanoparticles for various applications.

Silver release and antimicrobial properties of PMMA films doped with silver ions, nano-particles and complexes

Materials prepared on the base of bioactive silver compounds have become more and more popular due to low microbial resistance to silver. In the present work, the efficiency of polymethylmethacrylate (PMMA) thin films doped with silver ions, nanoparticles and silver-imidazole polymer complex was studied by a combination of AAS, XPS and AFM techniques. The biological activities of the proposed materials were discussed in view of the rate of silver releasing from the polymer matrix. Concentrations of Ag active form were estimated by its ability to interact with l-cysteine using electronic circular dichroism spectroscopy. Rates of the released silver were compared with the biological activity in dependence on the form of embedded silver. Antimicrobial properties of doped polymer films were studied using two bacterial strains: Staphylococcus epidermidis and Escherichia coli. It was found that PMMA films doped with Ag(+) had greater activity than those doped with nanoparticles and silver-imidazole polymeric complexes. However, the antimicrobial efficiency of Ag(+) doped films was only short-term. Contrary, the antimicrobial activity of silver-imidazole/PMMA films increased in time of sample soaking.

Plasmooptoelectronic tuning of optical properties and SERS response of ordered silver grating by free carrier generation

Electrical current induced reversible tuning of the optical properties of ordered silver gratings.

Polymethylmethacrylate doped with porphyrin and silver nanoparticles as light-activated antimicrobial material

Light-activated antimicrobial materials based on polymethylmethactylate doped with porphyrin and silver nanoparticles were prepared and studied.

Adhesion and proliferation of human endothelial cells on photochemically modified polytetrafluoroethylene

We studied the adhesion and proliferation of human endothelial cells on photochemically modified polytetrafluoroethylene samples. The polymer surfaces were modified by exposure to the ultraviolet light of a Xe(2)(*)-excimer lamp at a wavelength of 172 nm in an ammonia atmosphere. Treatment times were between 10 and 20 min. The endothelial cell density was determined 1, 3 and 8 days after seeding by image analysis. Surface modification of the samples resulted in a significant increase in the number of adhering cells and in the formation of a confluent cell layer after 3-8 days. The results were comparable than those obtained on polystyrene Petri dishes, which are used as standard substrates in cell cultivation. Thus modified PTFE appears to be a promising material for the fabrication of artificial vascular prostheses coated with endothelial cells.