Formulation of silymarin surface modified vesicles: In vitro characterization to cell viability assessment

Silymarin (SLR) is a poorly water-soluble bioactive compound with a wide range of therapeutic activities. Nanosized silymarin vesicles (F1-F6) were prepared by the solvent evaporation rehydration method. The silymarin vesicles were evaluated for vesicle size, surface charge, entrapment efficiency, and drug release studies. The optimized SLR lipid vesicle (F3) was further modified with the addition of the cationic polymer chitosan. After that, the modified vesicle (F3C1) was assessed for permeation flux, antimicrobial activity, cell viability, and molecular docking studies. The silymarin vesicles showed nanometric size (<250 nm), low polydispersibility index (<0.05), negative surface charge, and high SLR entrapment (85-95 %). The drug release study result demonstrated a maximum drug release of 91.2 ± 2.8 %. After adding chitosan to the surface, there was a significant change in the size, polydispersibility index, surface charge (positive), and encapsulation efficiency. The drug release was found to be prolonged, and the permeation flux was also increased in comparison to free SLR. A comparative antimicrobial result was observed in comparison to the free SLR and standard drug. The cell viability assay also demonstrated a low IC50 value for F3C1 against the cell line.

Integration of a facile sustainable resonance Rayleigh scattering switchable-based system for feasible determination of centrophenoxine, a nootropic and antioxidant agent; application to crude materials and dosage forms

The proposed research adheres to a certain methodology to ensure that the technique used for analyzing the centrophenoxine drug is sustainable and green. It is important to highlight that several tools that have been recently developed were utilized as potential indicators of environmental sustainability and applicability. The present research presents a novel and entirely innovative method utilizing ultrasensitive spectrofluorimetry for the detection of centrophenoxine (CPX) drug. The employed methodology in this study involved the utilization of one-step, one-pot, and direct spectrofluorimetric technique, which was found to be both efficient and environmentally sustainable in the validation and assessment of the drug. Simply, when CPX and erythrosine B reagent were combined in an acidic environment, the highly resonance Rayleigh scattering product was immediately produced. The sensitivity limits were observed to be within the range of 15-47 ng mL-1, whereas the linearity was assessed to be in the range of 50-2000 ng mL-1. The optimal settings for all modifiable parameters of the system were ascertained through an analysis of centrophenoxine-erythrosine B complexes. Moreover, the system demonstrated compliance with International Council for Harmonization (ICH) specifications without encountering any issues. The suggested process was then rated on different recent environmental safety measuring metrics to see how good it was for the environment. Fortunately, the WAC standards that combine ecological and functional elements utilizing the Green/Red/Blue (RGB 12) design also acclaimed the current analytical technique as a white one. Additionally, a new applicability evaluation tool (BAGI) was employed to estimate the practicability of the planned method in the analytical chemistry field.

Synergistic utility of NBD-Cl fluorogenic loading activity and salting-out assisted liquid-liquid extraction as sample pretreatment in rasagiline tracking in different matrices

A typical drug used to treat Parkinson's disease is called rasagiline. It belongs to an assortment of drugs known as monoamine oxidase inhibitors, which function by raising dopamine levels in the brain. This work created a unique spectrofluorimetric method for the analytical assay of rasagiline for the first time. The approach utilized the synergistic utility of the fluorogenic properties of benzofurazan and salting-out assisted liquid-liquid extraction. By combining these techniques an ultrasensitive, and highly selective methodology for the assay of rasagiline was established. Measurements were made of the resultant yellow fluorescent product at 533 nm by applying an excitation wavelength of 475.3 nm. The calibration graph was examined to assess its linearity across a range of 30-600 ng/ml. Through estimation, the limit of detection was discovered to be 8.9 ng/ml, while the quantitation limit was estimated to be 27 ng/ml. All relevant parameters influencing the fulfillment of the developed method were thoroughly examined and tuned. Following the directives set by the (ICH) the suggested approach was confirmed and demonstrated its capability for the accurate determination of rasagiline in tablets, as well as for testing content uniformity. The incorporation of salting-out assisted liquid-liquid extraction technology enables effective tracking of rasagiline in plasma samples, providing a novel and innovative approach for its analysis in biological matrices.

Facile and green chemistry-compatible fluorescence spectroscopic applications of acid red 87 used to evaluate eletriptan, antimigraine, in its pharmaceutical and biological samples

Eletriptan (ETR), a selective pharmaceutical agent agonist of the 5-hydroxytryptamine1 receptor subtype, are primarily used to treat acute migraine attacks. ETR is a triptan-class medication that works by narrowing cerebral blood vessels and reducing chemicals that produce headache pain, light and sound sensitivity, and nausea. Due to its effectiveness in reducing migraine symptoms, it is a worthwhile choice for those looking for quick and efficient treatment. A green, raid, one-pot and straightforward fluorescence spectrometric method was employed to evaluate ETR in tablets and biological samples. By introducing the ETR drug and the fluorescent ligand, Acid red 87, in an acidic buffer, a quenching of the ligand native fluorescent was promptly produced. The quenching action was simply attributed to the selective ion-pair complex generation between the cationic target and the selected ligand. An increase in ETR concentration was linearly proportional to the quenching response in the 50.0 - 500.0 ng/mL range. The optimal configurations for adjusting the system's variable parameters were determined by examining the ETR-Acid red 87 system's response. Additionally, the sensor that was developed met the standards set by the International Council for Harmonisation of Technical Requirements of Pharmaceuticals for Human Use. The sensitivity thresholds of the approach were 13.8 and 42.0 ng/mL for the detection and quantification parameters, respectively, LOD and LOQ. This approach proficiently evaluated the pharmaceutical and biological samples of ETR. Finally, the proposed approach not only simplifies the analysis process but also limits the badimpact on the environment, making it a promising technique for analytical applications.

An ingenious technique based on the usage of fluorone-based dye; pyrosin B in prucalopride assay in different matrices through an "on-off" dye native fluorescence probe

Prucalopride (PCD), is a modern medication approved by the United States in 2018 to alleviate constipation caused by motility issues. PCD demonstrates a strong affinity and selectivity toward the 5-HT4 receptor. The study here introduces a feasible, direct, non-extractive, and affordable pathway for PCD analytical tracking. The fluorimetric study is based on the on-off effect on the emission amplitude of fluorone-based dye (pyrosin B). In a one-pot experiment, the complex between PCD and pyrosin B is formed instantly in an acidic medium. Correlation between decreased pyrosin B emission and PCD concentrations provides a linear calibration plot from 50 to 900 ng/mL. PCD-dye complex system affecting variables were meticulously tuned. The values of the estimated limit of quantitation and limit of detection for the current methodology were 47.5 and 15.7 ng/mL, respectively. Conformity of the strategy validity was achieved by a comprehensive study of the International Council for Harmonization of Technical Requirements for Pharmaceuticals for Human Use criteria. The method was convincingly applied for PCD assay in tablets and content uniformity investigation. Furthermore, PCD tracking in the spiked biological fluid was applied. Finally, the method uses distilled water as dispersing medium which rise accommodation with the green chemistry principle.

Utility of Cilefa Pink B, a foodstuff dye as a fluoro-substrate in the devising of the first facile green Molecular-mass-Related Fluorescence Sensor for quantifying amlodipine in batched material and dosage forms; content uniformity evaluation

This study introduces the first and unique Molecular-mass-Related Fluorescence Sensor as the first fluorimetric strategy for determining amlodipine. An environmentally friendly, single-step, and direct spectrofluorimetric approach was utilized to evaluate the analyte. In an acidic setting, combining the amlodipine medication and the fluorescent dye Cilefa Pink B generated an instantaneous ultra-fluorescent product. An increase in dye response after adding amlodipine was proportional to the molecular weight of the generated complex, as measured at 329 nm. was the idea ofthe applied fluorimetric analysis. The complexing process increased the molecular mass from 879.86 to 1288.739 g mol-1. The medication's range of 0.050-1.00 µg mL-1 is directly correlated with this molecular massenlargement. The ideal settings for the changeable parameters of the system were established through an analysis of the response of the amlodipine-Cilefa Pink B system. Furthermore, the developed sensor complied with ICH (International Council for Harmonization) standards. The sensitivity limits were 0.0139 µg mL-1 (for the detection limit, LOD) and 0.042 µg mL-1 (for the quantification limit, LOQ). Additionally, this method effectively recovered the drug in its original and therapeutic dosage forms. Finally, the proposed process's environmental impact was also assessed through different modern greenness evaluation tools.

Self-assembling Organogels Loaded with Tenoxicam for Local Intensive Pain and Inflammation Cure: In Vitro and In Vivo Correlation

Due to tenoxicam (TX)'s poor aqueous solubility (0.072 mg/ml), it is poorly absorbable in the GIT, and the long-term oral administration of TX may cause severe GIT disturbances. Topical administration of TX can help in bypassing the GIT adverse effects. Therefore, in the present work, we constructed different pluronic/lecithin organogels (PLOs) for topical delivery of TX. PLO was constructed simply via direct mixing of an aqueous pluronic solution with lecithin solution. The prepared PLO formulations were characterized for their physicochemical properties including pH, drug content, visual inspection, viscosity, and spreadability. Also, the in vitro release and kinetic studies were carried out to investigate the mechanism of drug release. Moreover, the in vivo studies were carried out by investigating the anti-inflammatory and analgesic activities using albino male rats. The results showed that the modified PLOs have good physicochemical properties. The viscosity of the modified gels is a direct proportionality with both lecithin and pluronic concentrations. Also, subsequently, the drug release rate is directly proportional to gel viscosity. Moreover, the in vivo studies showed that the modified PLOs (F19) showed a significant ( < 0.05%) paw edema inhibition and pain analgesia compared with other investigated groups. Also, the results indicated that the increase in dose is accompanied by higher activity and a longer duration of action which extended to 12 h. Hence, the modified PLOs are promising safe candidates or vehicles for effective TX loading with sustained delivery behavior.

Formulation of silymarin binary and ternary solid dispersions: Characterization, simulation study and cell viability assessment against lung cancer cell line

Silymarin (SL) is a water-insoluble flavonoid used in the treatment of different diseases, but its therapeutic activity is limited due to its low solubility. So, in the present study, SL solid dispersions (SDs) were developed using different carriers like Kollidone VA64 (KL), Soluplus (SP), and Poloxamer 188 (PL) by solvent evaporation (SE), microwave irradiation (MI), and freeze-drying (FD) methods. The phase solubility and saturation solubility studies were assessed to estimate the stability constant as well as the carrier effect. The dissolution studies were performed for prepared SL-SDs (binary and ternary) to select the optimum SL-SDs. The selected SL-SDs (F5, F9) were further characterized for infrared spectroscopy (IR), nuclear magnetic resonance (NMR), differential scanning calorimeter (DSC), scanning electron microscope (SEM), and X-ray diffraction (XRD). Finally, the comparative cell viability assay (lung cancer cell line) was performed to evaluate the change in activity after the formulation of SDs. The phase solubility and solubility study results displayed marked enhancements in solubility. The dissolution study findings showed significant enhancement in drug release from ternary solid dispersions (F7-F9) > ternary physical mixture (PM3) > binary solid dispersions (F1-F6) > binary physical mixture (PM1, PM2) in comparison to free SL. A greater release was observed from ternary SDs due to the addition of PL in the formulation, which had a synergistic effect on increasing the solubility. IR and NMR spectra revealed no chemical interaction between SL, KL, and PL. DSC, XRD, and SEM all confirmed the transformation of crystalline SL into amorphous SL. The cell viability assay demonstrated significantly enhanced results from ternary solid dispersion (F9) compared to free SL. Based on the study results, it can be said that SL-SDs are an alternative way to deliver drugs orally that can improve solubility and have anti-cancer activity.

Formulation of multicomponent inclusion complex of cyclodextrin-amino acid with Chrysin: Physicochemical characterization, cell viability and apoptosis assessment in human primary glioblastoma cell line

Chrysin (CR) is a water-insoluble drug reported for different therapeutic effects. The microwave irradiation method was used in this study to create a multicomponent inclusion complex (CR-MC) containing CR (drug) and carrier hydroxyl propyl beta cyclodextrin (HP β CD) and L-arginine (LA). The prepared inclusion complex (CR-MC) was evaluated for dissolution study and results were compared with chrysin physical mixture (CR-PM). Further, the samples were assessed for infra-red (IR), nuclear magnetic resonance (NMR), differential scanning calorimeter (DSC), scanning electron microscope (SEM) and molecular docking. Finally, the cell viability, reactive oxygen species and flow cytometer studies were also assessed to check the potential of the prepared inclusion complex on the human primary glioblastoma cell line (U87-MG cell). The phase solubility findings revealed a stability constant (773 mol L-1) as well as a complexation efficiency of 0.027. The dissolution study displayed a significant increase in CR release from CR-MC (99.03 ± 0.39%) > CR-PM (70.58 ± 1.16%) > pure CR (35.29 ± 1.55%). NMR and IR spectral data revealed no interaction between CR and carriers. SEM and DSC study results revealed the conversion into amorphous form. The molecular docking results illustrated a high docking score, which supports the findings of complex formation. The cell viability, reactive oxygen species, and flow cytometry studies results showed enhanced activity from CR-MC against the tested human primary glioblastoma cell line. From the results it has been observed that chrysin solubility significantly increased after complexation and there in vitro activity also enhanced against cancer cell line.

A highly sensitive micelle-enhanced synchronous spectrofluorimetric determination of the recently approved co-formulated drugs, bilastine and montelukast in pharmaceuticals and human plasma at nanogram levels

In this study, the simultaneous determination of bilastine and montelukast, two recently approved co-formulated antihistaminic medications, was accomplished using a quick, sensitive, environmentally friendly, and reasonably priced synchronous fluorescence spectroscopic approach for the first time. Enhancement of the method's sensitivity down to nanogram levels was achieved by the addition of sodium dodecyl sulfate (1.0% w/v) as a micellar system. According to the results, bilastine and montelukast's fluorescence was measured at 255.3 and 355.3 nm, respectively, using Δλ of 40.0 nm and distilled water as a green diluting solvent. With respect to the concentration ranges of bilastine (5.0-300.0 ng/ml) and montelukast (50.0-1000.0 ng/ml), the method showed excellent linearity (r ≥ 0.9998). The results showed that the suggested method is highly sensitive, with detection limits of 1.42 and 13.74 ng/ml for bilastine and montelukast, respectively. Within-run precisions (intra- and interday) per cent relative standard deviations (RSD) for both analytes were <0.59%. With high percentage recoveries and low percentage RSD values, the designed approach was successfully applied for the simultaneous estimation of the cited medications in their dosage form and human plasma samples. To evaluate the green profile of the suggested method, an analytical GREENNESS metric approach (AGREE) and green analytical procedure index (GAPI) metric tools were used. These two methods for evaluating greenness confirmed that the developed method met the highest number of green requirements, recommending its use as a green substitute for the routine analysis of the studied drugs. The proposed approach was validated according to ICHQ2 (R1) guidelines.

Effect of nano-encapsulated food flavorings on streptozotocin-induced diabetic rats

Flavors and aromas are widely used in food and pharmaceutical industries to enhance food palatability. However, it is worth noting that they may also have bioactivity. This study aims to examine the potential impact of key flavors and their nanocapsules on health and diseases, such as type 2 diabetes mellitus (T2DM). The 36 nanocapsules of key flavorings were prepared by high shear homogenization (HSH). Seventy-two male Sprague-Dawley rats received a single dosage of streptozotocin (35 mg kg-1 body weight) intraperitoneally. All of the nutritional and biochemical parameters were statistically analyzed. A virtual docking study was conducted. Linalool nanoemulsion results showed the highest encapsulation efficiency (86.76%), while isoamyl acetate nanoparticles showed the lowest (69.99%). According to GC-MS analysis, encapsulation did not affect the flavoring structure with particle size distributions ranging from 277.3 to 628.8 nm. Using TEM, nanoemulsion particles appeared spherical with a desired nanometric diameter size. In the oral glucose tolerance test, flavorings in oil and nanoforms had no discernible hypoglycemia effects in normal rats. The nutritional and biochemical parameters confirmed that both normal and nanoencapsulation forms demonstrated a potential anti-hyperglycemic effect, and enhanced the rat health compared to the raw flavorings. The studied flavorings and their nanocapsules seem to have the potential double effect of a flavor compound as a food palatability enhancer with a potential beneficial effect on type 2 diabetes mellitus without any health drawbacks.

Formulation of Silymarin-β Cyclodextrin-TPGS Inclusion Complex: Physicochemical Characterization, Molecular Docking, and Cell Viability Assessment against Breast Cancer Cell Lines

Silymarin (SIL) is a poorly water-soluble flavonoid reported for different pharmacological properties. Its therapeutic applications are limited due to poor water solubility. In this study, the solubility of silymarin has been enhanced by preparing freeze-dried binary and ternary complexes using beta cyclodextrin (βCD) and d-α-tocopherol polyethylene glycol 1000 succinate (TPGS). The stoichiometry of the drug and the carrier was selected from the phase solubility study. The dissolution study was performed to assess the effect of complexation on the release pattern of SIL. The formation of inclusion complexes was confirmed by different physicochemical studies. Finally, a cell viability assay (MCF 7; breast cancer cell line) was performed to compare the activity with free SIL. The phase solubilization results revealed the formation of a stable complex (binary) with a stability constant and complexation efficiency (CE) value of 288 mol L-1 and 0.045%. The ternary sample depicted a significantly enhanced stability constant and CE value (890 mol L-1 and 0.14%). The release study results showed a marked increase in the release pattern after addition of βCD (alone) in the binary mixture (49.4 ± 3.1%) as well as inclusion complex (66.2 ± 3.2%) compared to free SIL (32.7 ± 1.85%). Furthermore, with the addition of TPGS in SIL-βCD (ternary), the SIL release was found to be significantly enhanced from the SIL ternary mixture (79.2 ± 2.13%) in 120 min. However, fast SIL release was achieved with 99.2 ± 1.7% in 45 min for the SIL ternary complex. IR and NMR spectral analysis results revealed the formation of a stable complex with no drug-polymer interaction. The formation of complexes was also confirmed by the molecular docking study (docking scores of 4.1 and -6.4 kcal/mol). The in vitro cell viability result showed a concentration-dependent activity. The IC50 value of the SIL ternary complex was found to be significantly lower than that of free SIL. The findings of the study concluded that the prepared SIL inclusion complex can be used as an alternative oral delivery system to enhance solubility, dissolution, and biological activity against the tested cancer cell line.

Novel Natrosol/Pectin-co-poly (acrylate) based pH-responsive polymeric carrier system for controlled delivery of Tapentadol Hydrochloride

Background & Objectives

This study aimed to create a controlled delivery system for Tapentadol Hydrochloride by developing interpenetrating networks (IPNs) of Natrosol-Pectin copolymerized with Acrylic Acid and Methylene bisacrylamide, and to analyze the effects of various ingredients on the physical and chemical characteristics of the IPNs.

Methods

Novel Tapentadol Hydrochloride-loaded Natrosol-Pectin based IPNs were formulated by using the free radical polymerization technique. Co-polymerization of Acrylic Acid (AA) with Natrosol and Pectin was performed by using Methylene bisacrylamide (MBA). Ammonium persulfate (APS) was used as the initiator of crosslinking process. The impact of ingredients i.e. Natrosol, Pectin, MBA, and Acrylic Acid on the gel fraction, porosity, swelling (%), drug loading, and drug release was investigated. FTIR, DSC, TGA, SEM and EDX studies were conducted to confirm the grafting of polymers and to evaluate the thermal stability and surface morphology of the developed IPNs.

Results

Swelling studies exhibited an increase in swelling percentage from 84.27 to 91.17% upon increasing polymer (Natrosol and Pectin) contents. An increase in MBA contents resulted in a decrease in swelling from 85 to 67.63%. Moreover, the swelling was also observed to increase with higher AA contents. Significant drug release was noted at higher pH instead of gastric pH value. Oral toxicological studies revealed the nontoxic and biocompatible nature of Natrosol-Pectin IPNs.

Interpretation & Conclusion

The developed IPNs were found to be an excellent system for the controlled delivery of Tapentadol Hydrochloride.

Protective effect of fustin against adjuvant-induced arthritis through the restoration of proinflammatory response and oxidative stress

Rheumatoid arthritis causes irreparable damage to joints. The present research sought to check fustin's anti-arthritic efficacy against the complete Freund's adjuvant-induced arthritis paradigm in animals by altering the inflammatory response. In the rats, complete Freund's adjuvant was used to trigger arthritis and they received fustin at 50 and 100 mg/kg for 21 days. At regular intervals, the hind paw volume and arthritic score were assessed. After the trial period, hematological, antioxidant, pro-inflammatory cytokines, and other biochemical parameters were estimated. Fustin-treated rats showed the down-regulation of hind paw volume, arthritic score, and altered hematological parameters (TLC, DLC (neutrophil, lymphocyte, monocyte, eosinophil, basophil)). Furthermore, fustin significantly mitigates proinflammatory cytokine (reduced interleukin, tumor necrosis factor-a (TNF-α), IL-6, IL-1β), oxidative stress (attenuated malondialdehyde (MDA), catalase (CAT), glutathione (GSH), superoxide dismutase (SOD)), attenuated production of prostaglandin E2 and myeloperoxidase (MPO) and improved nuclear factor erythroid 2-related factor (Nrf2) action. Fustin led to the benefit in arthritis-prone animals elicited by complete Freund's adjuvant via pro-inflammatory cytokine.

Effect of Europinidin against Alcohol-Induced Liver Damage in Rats by Inhibiting the TNF-α/TGF-β/IFN-γ/NF-kB/Caspase-3 Signaling Pathway

BACKGROUND

The effect of europinidin on alcoholic liver damage in rats was examined in this research.

METHODS

A total of 24 Wistar rats were grouped in the same way into four groups: normal control (normal), ethanol control (EtOH), europinidin low dose (10 mg/kg), and europinidin higher dose (20 mg/kg). The test group rats were orally treated with europinidin-10 and europinidin-20 for 4 weeks, whereas 5 mL/kg distilled water was administered to control rats. In addition, 1 h after the last dose of the above-mentioned oral treatment, 5 mL/kg (i.p.) EtOH was injected to induce liver injury. After 5 h of EtOH treatment, samples of blood were withdrawn for biochemical estimations.

RESULTS

Administration of europinidin at both doses restored all of the estimated serum, i.e., liver function tests (ALT, AST, ALP), biochemical test (Creatinine, albumin, BUN, direct bilirubin, and LDH), lipid assessment (TC and TG), endogenous antioxidants (GSH-Px, SOD, and CAT), malondialdehyde (MDA), nitric oxide (NO), cytokines (TGF-β, TNF-α, IL-1β, IL-6, IFN-γ, and IL-12), caspase-3, and nuclear factor kappa B (NF-κB) associated with the EtOH group.

CONCLUSION

The results of the investigation showed that europinidin had favorable effects in rats given EtOH and may have hepatoprotective potential property.

Application of quality-by-design for adopting an environmentally green fluorogenic determination of benoxinate hydrochloride in eye drops and artificial aqueous humour

Herein, a sensitive and selective spectrofluorimetric method has been developed for the determination of the ocular local anesthetic benoxinate hydrochloride (BEN-HCl) in eye drops and artificial aqueous humour. The proposed method is based on the interaction of fluorescamine with the primary amino group of BEN-HCl at room temperature. Following the excitation of the reaction product at 393 nm, the emitted relative fluorescence intensity (RFI) was measured at 483 nm. The key experimental parameters were carefully examined and optimized by adopting an analytical quality-by-design approach. The method used a two-level full factorial design (2⁴ FFD) to obtain the optimum RFI of the reaction product. The calibration curve was linear at the range of 0.10-1.0 μg/mL of BEN-HCl with sensitivity down to 0.015 μg/mL. The method was applied for analyzing the BEN-HCl eye drops and could also assess its spiked levels in artificial aqueous humour with high % recoveries (98.74-101.37%) and low SD values (≤ 1.11). To investigate the green profile of the proposed method, a greenness assessment was performed with the aid of the Analytical Eco-Scale Assessment (ESA) and GAPI. The developed method obtained a very high ESA rating score in addition to being sensitive, affordable, and environmentally sustainable. The proposed method was validated according to ICH guidelines.

Application of isoindole fluorophore formation for determination of linagliptin in the sole and co-formulated tablets: Application for plasma assay and content uniformity testing

Linagliptin is a new medicament belonging to dipeptidyl peptidase-4 enzyme inhibitors group. The mentioned medication is used to cure type 2 diabetes and is taken orally as a monotherapy or in a co-formulation with metformin. or empagliflozin. Herein, a novel, straightforward, and cost-effective method for linagliptin assay was developed with a workable use of an isoindole derivative. The primary amine moiety present in linagliptin enables its condensation with o-phthalaldehyde to form a fluorescent product in the presence of a sulfhydryl group-containing compound (2-mercaptoethanol) 0.01 % V/V. The isoindole fluorophore yield was monitored at (λ_excitation 337.8 nm, λ_emission 434.3 nm) and all experimental variables were meticulously checked and adjusted. Fluorescence intensity versus linagliptin concentration was plotted to construct the calibration graph, and excellent linearity was achieved at values between 50 and 2000 ng/mL. The validity of the method was verified through a rigorous examination of the ICH guidelines. The method application was successful for linagliptin in different dosage forms, content uniformity study, and monitoring in spiked plasma. The devised technique was demonstrated to be a promising, easy, and quick alternate method for linagliptin assayin clinical study and quality control.

Optimisation of a Greener-Approach for the Synthesis of Cyclodextrin-Based Nanosponges for the Solubility Enhancement of Domperidone, a BCS Class II Drug

BCS class II molecules suffer from low oral bioavailability because of their poor permeability and sub-optimal aqueous solubility. One of the approaches to enhance their bioavailability is using cyclodextrin-based nanosponges. This study aimed to optimise and evaluate the feasibility of a microwave-assisted approach to synthesise nanosponges and improve domperidone's solubility and drug delivery potential. In the production process, microwave power level, response speed, and stirring speed were optimised using the Box-Behnken approach. Ultimately, the batch with the smallest particle size and highest yield was chosen. The optimised method of synthesis of the nanosponges resulted in a product yield of 77.4% and a particle size of 195.68 ± 2.16 nm. The nanocarriers had a drug entrapment capacity of 84 ± 4.2% and a zeta potential of -9.17± 0.43 mV. The similarity and the difference factors demonstrated proof-of-concept, showing that the drug release from the loaded nanosponges is significantly greater than the plain drug. Additionally, spectral and thermal characterisations, such as FTIR, DSC, and XRD, confirmed the entrapment of the drug within the nanocarrier. SEM scans revealed the porous nature of the nanocarriers. Microwave-assisted synthesis could be used as a better and greener approach to synthesise these nanocarriers. It could then be utilised to load drugs and improve their solubility, as seen in the case of domperidone.

Correction: Exploiting butyrylcholinesterase inhibitors through a combined 3-D pharmacophore modeling, QSAR, molecular docking, and molecular dynamics investigation

[This corrects the article DOI: 10.1039/D3RA00526G.].

Annotation of Potential Vaccine Targets and Designing of mRNA-Based Multi-Epitope Vaccine against Lumpy Skin Disease Virus via Reverse Vaccinology and Agent-Based Modeling

Lumpy skin disease is a fatal emerging disease of cattle, which has started to gain extensive attention due to its rapid incursions across the globe. The disease epidemic causes economic loss and cattle morbidity. Currently, there are no specific treatments and safe vaccines against the lumpy skin disease virus (LSDV) to halt the spread of the disease. The current study uses genome-scan vaccinomics analyses to prioritize promiscuous vaccine candidate proteins of the LSDV. These proteins were subjected to top-ranked B- and T-cell epitope prediction based on their antigenicity, allergenicity, and toxicity values. The shortlisted epitopes were connected using appropriate linkers and adjuvant sequences to design multi-epitope vaccine constructs. Three vaccine constructs were prioritized based on their immunological and physicochemical properties. The model constructs were back-translated to nucleotide sequences and codons were optimized. The Kozak sequence with a start codon along with MITD, tPA, Goblin 5′, 3′ UTRs, and a poly(A) tail sequences were added to design a stable and highly immunogenic mRNA vaccine. Molecular docking followed by MD simulation analysis predicted significant binding affinity and stability of LSDV-V2 construct within bovine immune receptors and predicted it to be the top-ranked candidate to stimulate the humeral and cellular immunogenic responses. Furthermore, in silico restriction cloning predicted feasible gene expression of the LSDV-V2 construct in a bacterial expression vector. It could prove worthwhile to validate the predicted vaccine models experimentally and clinically against LSDV.

Determination of metanil yellow dye in turmeric powder using a unique fluorescence Europium doped carbon dots

Turmeric, a spice known for its therapeutic benefits, is a major source of curcumin which is a polyphenol with anti-inflammatory properties. It aids in treating arthritis, anxiety, metabolic syndrome, liver disease, hyperlipidemia, and inflammatory diseases. In this study, a novel fluorescence probe was designed to detect the adulteration of curcumin by metanil yellow (a harmful artificial dye). The probe was synthesized from the carbonization and conversion of the Tannic acid-Eu³⁺ complex to bright fluorescence Eu-carbon dots in the presence of orthophosphoric acid. The size, morphological, and optical features of the formed Eu-carbon dots were characterized by UV, SEM, TEM, and FTIR techniques. Furthermore, the formed Eu-carbon dots possess unique fluorescence excitation and emission features at 307.5 nm and 340.6 nm, respectively. These fluorescence features can be successfully quenched upon the addition of metanil yellow dye. The value of quenching in the fluorescence intensity of the Eu-C-dots was directly proportional to the dye's concentration. The LOD value for the proposed method was 0.390 µg/mL with a linear range of 1.0-15.0 µg/mL. Furthermore, the methodology exhibited good recovery values for determining the studied dye without any interference from the presence of curcumin.

Neuroprotectant Effects of Hibiscetin in 3-Nitropropionic Acid-Induced Huntington's Disease via Subsiding Oxidative Stress and Modulating Monoamine Neurotransmitters in Rats Brain

BACKGROUND

Previously reported data suggest that hibiscetin, isolated from roselle, contains delphinidin-3-sambubioside and cyanidin-3-sambubioside including anthocyanidins and has a broad range of physiological effects. In this study, we aim to analyze the effect of hibiscetin neuroprotective ability in rats against 3-nitropropionic acid (3-NPA)-induced Huntington's disease (HD).

METHODS

To investigate possible toxicities in animals, oral acute toxicity studies of hibiscetin were undertaken, and results revealed the safety of hibiscetin in animals with a maximum tolerated dose. Wistar rats were divided into four groups (n = 6); (group-1) treated with normal saline, (group-2) hibiscetin (10 mg/kg) only, (group-3) 3-NPA only, and (group-4) 3-NPA +10 mg/kg hibiscetin. The efficacy of hibiscetin 10 mg/kg was studied with the administration of 3-NPA doses for the induction of experimentally induced HD symptoms in rats. The mean body weight (MBW) was recorded at end of the study on day 22 to evaluate any change in mean body weight. Several biochemical parameters were assessed to support oxidative stress (GSH, SOD, CAT, LPO, GR, and GPx), alteration in neurotransmitters (DOPAC, HVA, 5-HIAA, norepinephrine, serotonin, GABA, and dopamine), alterations in BDNF and cleaved caspase (caspase 3) activity. Additionally, inflammatory markers, i.e., tumor necrosis factor alpha (TNF-α), interleukins beta (IL-1β), and myeloperoxidase (MPO) were evaluated.

RESULTS

The hibiscetin-treated group exhibits a substantial restoration of MBW than the 3-NPA control group. Furthermore, 3-NPA caused a substantial alteration in biochemical, neurotransmitter monoamines, and neuroinflammatory parameters which were restored successfully by hibiscetin.

CONCLUSION

The current study linked the possible role of hibiscetin by offering neuroprotection in experimental animal models.

A Novel Approach for the Availability and Ocular Delivery of Tenoxicam Potassium: Synthesis, Characterization, and In Vivo Application

Tenoxicam (TX) is a non-steroidal anti-inflammatory agent that can be used to control pain in various ophthalmic lesions like cataracts, refractive surgery, and corneal abrasion. TX has a very slightly aqueous solubility of 0.072 mg/mL resulting in difficulty to be formulated in ophthalmic solutions. This study aims to improve TX solubility by converting it into its potassium salt to achieve a target of 10 mg/mL (1%w/v) concentration of TX in the desired aqueous medium for the formulation of aqueous ophthalmic solutions. The synthesized TX salt was characterized by different evaluation parameters such as solubility studies, ¹H NMR, IR, and elemental analyses. Different TX potassium solutions were formulated at concentrations of 0.5% and 1% w/v using different viscosity-imparting agents. The prepared solutions were characterized for their physicochemical properties including visual inspection, pH, rheological, in vitro release, and kinetic behavior. Also, the formulations were biologically evaluated in vivo using male albino rabbits. The obtained results showed the successful synthesis of TX salt, as indicated by IR and NMR, and elemental analysis. The solubility study showed that the solubility of TX was improved hugely to 18 mg/mL (250-fold). In addition, the results showed that the prepared formulations showed acceptable physicochemical properties. The highest release rate was obtained with formula F1, which contains no viscosity-imparting agents. While as, the lowest release rate was obtained in the case of formula F9, composed of Pluronic F127 (12% w/v). The in vivo results showed that TX optimized ophthalmic solutions F8 and F9 inhibited the redness and edema in an extended or sustained manner.

Facile Synthesis and Fabrication of NIPAM-Based Cryogels for Environmental Remediation

Herein, polymeric cryogels containing poly(N-isopropylacrylamide) were synthesized by cryo-polymerization at subzero temperature. The synthesized cryogels were loaded with silver and palladium nanoparticles by the chemical reduction method at room temperature using the reducing agent NaBH₄. Moreover, for comparison with cryogels, pure poly(N-isopropylacrylamide) hydrogel and its silver hybrid were also prepared by the conventional method at room temperature. The chemical structure and functional group analysis of the pure cryogels was confirmed by Fourier transform infrared spectroscopy. The synthesis of hybrid cryogels was confirmed by the X-ray diffraction technique and energy dispersive X-ray. The pore size and surface morphology of the pure cryogels, their respective hybrid cryogels and of conventional hydrogels were studied by using the scanning electron microscopy technique. The hybrid cryogels were successfully used as a catalyst for the degradation of methyl orange dye. The degradation performance of the hybrid cryogels was much better than its counterpart hybrid hydrogel for methyl orange dye. The effect of temperature and amount of catalyst on catalytic performance was studied by UV-visible spectroscopy. The reduction follows pseudo-first-order reaction kinetics. In addition, the antibacterial activities of these cryogels were evaluated against Gram-positive bacteria (Staphylococcus aureus, ATCC: 2593) and Gram-negative bacteria (Escherichia coli, ATCC: 25922). Both hybrid cryogels have shown much better antibacterial activity for these two strains of bacteria compared to pure cryogels. The results indicate that these cryogels are potential candidates for water purification systems as well as biomedical applications.

Exploiting butyrylcholinesterase inhibitors through a combined 3-D pharmacophore modeling, QSAR, molecular docking, and molecular dynamics investigation†

Alzheimer's disease (AD), a neurodegenerative condition associated with ageing, can occur. AD gradually impairs memory and cognitive function, which leads to abnormal behavior, incapacity, and reliance. By 2050, there will likely be 100 million cases of AD in the world's population. Acetylcholinesterase (AChE) and butyrylcholinesterase (BuChE) inhibition are significant components of AD treatment. This work developed models using the genetic method multiple linear regression, atom-based, field-based, and 3-D pharmacophore modelling. Due to internal and external validation, all of the models have solid statistical (R² > 0.81 and Q² > 0.77) underpinnings. From a pre-plated CNS library (6055), we discovered a hit compound using virtual screening on a QSAR model. Through molecular docking, additional hit compounds were investigated (XP mode). Finally, a molecular dynamics simulation revealed that the Molecule5093-4BDS complex was stable (100 ns). Finally, the expected ADME properties for the hit compounds (Molecule5093, Molecule1076, Molecule4412, Molecule1053, and Molecule3344) were found. According to the results of our investigation and the prospective hit compounds, BuChE inhibitors may be used as a treatment for AD.

Alzheimer's disease (AD), a neurodegenerative condition associated with ageing, can occur.

Design and Evaluation of Solid Lipid Nanoparticles Loaded Topical Gels: Repurpose of Fluoxetine in Diabetic Wound Healing

The current study aimed to prepare a topical gel containing solid lipid nanoparticles (SLNs) encapsulating fluoxetine for diabetic wound healing effects. Fluoxetine (FX) was loaded into SLNs by employing an emulsion solvent evaporation technique using stearic acid as a lipid, and soya lecithin as a surfactant. SLNs were then evaluated for particle size, polydispersity index (PDI), zeta potential (ZP), percent entrapment efficiency (%EE), percent drug loading (%DL), and in vitro drug release. The optimized SLN (FS3) composed of FX (100 mg), SA (150 mg), and SA (100 mg) displayed mean particle size (467.3 ± 2.2nm), PDI (0.435 ± 0.02), ZP (-32.2 ± 4.47mV), EE (95.8 ± 3.38%), and DL (16.4 ± 2.4%). FTIR and DSC studies denote drug-polymer compatibility and the amorphous nature of FX in the SLNs. The drug release at 24 h was found to be (98.89 ± 2.57%) which followed the fickian diffusion mechanism. SLN (FS3) was further loaded into carbopol gel and tested for pH, spreadability, and extrudability of pharmaceutical parameters. In-vitro release of FX from the SLN gel and plain gel was compared, diabetic wound healing gel (DWH) showed sustained drug delivery. An in vivo study was also performed for DWH gel in streptozotocin-induced diabetic rats. Histopathological examination exhibited DWH gel-treated wounds have increased hydroxyproline, cellular proliferation, a rise in the number of blood vessels, and the level of collagen synthesis. Thus, DWH gel-loaded SLN encapsulated with FX could be a potential carrier for the effective treatment and management of diabetic wounds.

Mechanistic Insights into Luteolin-Loaded Elastic Liposomes for Transdermal Delivery: HSPiP Predictive Parameters and Instrument-Based Evidence

We evaluated mechanistic insights into luteolin (LUT)-loaded elastic liposomes (OLEL1) permeated across rat skin. HSPiP software-based parameters, thermal analysis, infrared analysis, and morphological evaluations were employed to understand mechanistic observations of drug permeation and deposition. HSPiP provided HSP values (δ_d, δ_p, and δ_h) of OLEL1 (based on composition), LUT, excipients, and rat skin (literature value and by-default value). Rat skin was studied via Fourier transform infrared (FTIR), differential scanning calorimetry (DSC), fluorescence microscopy, scanning electron microscopy (SEM), and atomic force microscopy (AFM) studies. The δ_d and δ_h estimation of the skin and phosphatidylcholine showed close relation in terms of δ_d and δ_h. Similarly, OLEL1 and the skin might interact with each other mainly through δ_d and δ_p forces as evidenced by the predicted values. The untreated skin showed characteristic stretching and vibrations as compared to lower frequencies caused by OLEL1. DSC showed changes in the thermal behavior of the skin after OLEL1 treatment as compared to the untreated skin. Visualization of these changes was evident under fluorescence microscopy and SEM for confirmed substantial reversible surface perturbation of the skin protein layer for improved vesicle permeation and subsequent internalization with the inner skin matrix. The AFM study confirmed the nanoscale surface roughness variation caused substantially by OLEL1 and OLEL1 placebo as compared to the untreated control and drug solution. Thus, the study clearly demonstrated mechanistic insights into LUT-loaded vesicles across rat skin for enhanced permeation and drug deposition.

Isolation and Characterization of Flavonoid Naringenin and Evaluation of Cytotoxic and Biological Efficacy of Water Lilly (Nymphaea mexicana Zucc.)

Despite its limited exploration, Nymphaea mexicana Zucc. can be beneficial if pharmacology, isolation, and biological evaluation are given attention. It is an aquatic species that belongs to the family Nymphaeaceae. The thrust area of the work was the extraction, isolation, and biological evaluation of different extracts of the N. mexicana Zucc. plant. The primary goal of this research was to assess the antimicrobial, antioxidant, and anticancer activities of the extracts and to isolate the target naringenin compound. Comparative FT IR analysis of different extracts of this plant revealed the presence of functional groups of plant secondary metabolites, including polyphenols, flavonoids, terpenoids, esters, amines, glycosides, alkanes, alkaloids, fatty acids, and alcohols. Moderate free radical scavenging potential has been achieved for the various extracts via reducing power and DPPH assays. While cytotoxic activity was evaluated by colorimetric and lactate dehydrogenase cell viability tests on potent cancer cell lines. Lung adenocarcinoma epithelial cells (A-549), and breast cells (MC-7) were treated with MeOH extract. The antimicrobial activity against bacterial strains was evaluated using Gram-positive and -negative cultures, where maximum and minimum inhibition zones were recorded for different strains, including 1.6-25.6 μg/mL for Streptococcus aureus, using the agar well diffusion method. In addition, the anti-inflammatory activity of different extracts of N. mexicana Zucc. was evaluated in a nitrite radical scavenging assay with high concentrations of secondary metabolites, which are important against human pathogens and other diseases.

Two Versatile Pencil Graphite-Polymer Sensor Electrodes Coupled with Potentiometry and Potentiometric Titration Methods: Profiling Determinations of Vitamin V in Tablets and Urine Samples

Herein, we developed a new pencil graphite ion-selective electrode strategy for the broadly used erectile dysfunction medication, sildenafil citrate (SC, vitamin V), for its automated potentiometry and potentiometric titration profiling in marketed tablets and human urine samples. The method was based on ion-pair complexation between SC and sodium tetraphenylborate (Na-TPB) or phosphotungstic acid (PTA), embedded into a pencil-fabricated graphite sensor electrode coated with poly(vinyl chloride, PVC) matrix, which is pre-plasticized with two different pre-studied plasticizers. The modern fabricated electrodes have a proven fast near-Nernstian response for SC over the concentration range of 1.0 × 10^-6 to 1.0 × 10^-2 and 1.0 × 10^-5 to 1.0 × 10^-2 M, with LODs of 6.5 × 10^-7 and 5.5 × 10^-6 over a pH 3-6 for (SC-TPB)- and (SC-PTA)-based membrane sensors, of O-nitrophenyl octyl ether (O-NPOE) and dioctyl phthalate (DOP), respectively. The selectivity coefficients for different interferents, including many inorganic cations, sugars, and/or nitrogenous compounds, were tested and confirmed. Applications of the proposed method were conducted on the determination of SC in its tablets and urine samples under the proper conditions. The percent recovery values were compared with those obtained by an official method and showed an RSD ≤ 0.3% (n = 5).

Improved Subcutaneous Delivery of Ketoconazole Using EpiDerm and HSPiP Software-Based Simulations as Assessed by Cell Viability, Cellular Uptake, Permeation, and Hemolysis In Vitro Studies

Ketoconazole (KETO) is the drug of choice to control local, systemic, and resistant types of fungal infections. Subcutaneous (sub-Q) delivery offers several benefits. The present study investigated the sub-Q delivery of KETO using HSPiP software based on optimized concentrations of dimethylacetamide (DMA) in binary solvents (DMA + water), in vitro cellular uptake (J774A.1) assays, cellular toxicity (L929), and in vitro hemolysis studies. Results showed that the estimated permeation coefficient (9.6 × 10^-3 cm/h) and diffusion coefficient (3.9 × 10^-3 cm²/h) of KETO (22.3 mg) in KF3 (300 mg of DMA + water) across EpiDerm were relatively higher as compared to the other formulations [KF1 (11.2 and 150 mg as KETO and DMA, respectively) and KF2 [(22.3 and 300 mg as KETO and DMA, respectively)] due to the increased content of DMA and KETO. HSPiP simulated and predicted the impact of constant and variable diffusion coefficients on the percent drug absorption across EpiDerm and the time needed to achieve equilibrium. The concentration-dependent diffusion coefficient fed into HSPiP predicted that the drug absorption and permeation values were linearly dependent on the square root of time. The HSPiP predicted permeation flux values from KF3, KF2, and KF1 across the EpiDerm were 4.07 × 10^-6, 4.01 × 10^-6, and 1.1 × 10^-6 g/cm²/s, respectively, at respective D range values. The selected K30G (324 mOsm/Kg) showed an optimal pH (6.9) and minimum drug loss (0.01%) over a period of 1 month at room temperature. KG30 was found to be less toxic to normal L292 cells and caused maximum cytotoxicity to candida cells residing within infected macrophage cells (J774A.1 incubated for 24 h), which was attributed to the slow diffusion of K30G compared to DS (the drug solution with an equivalent concentration). KG30 elicited substantial internalization with candida albicans (MTCC 4748) compared to the control group (24 h). Lastly, in vitro hemolysis studies (1 and 5 μg/mL) corroborated the safety of K30G for sub-Q delivery. Therefore, this new formulation and approach for delivering KETO is a promising alternative to conventional products to control fungal infections and, thus, should be further studied in vivo.

Solubilization and Thermodynamic Analysis of Isotretinoin in Eleven Different Green Solvents at Different Temperatures

The solubilization and thermodynamic analysis of isotretinoin (ITN) in eleven distinct green solvents, such as water, methyl alcohol (MeOH), ethyl alcohol (EtOH), 1-butyl alcohol (1-BuOH), 2-butyl alcohol (2-BuOH), ethane-1,2-diol (EG), propane-1,2-diol (PG), polyethylene glycol-400 (PEG-400), ethyl acetate (EA), Transcutol-HP (THP), and dimethyl sulfoxide (DMSO) was studied at several temperatures and a fixed atmospheric pressure. The equilibrium approach was used to measure the solubility of ITN, and the Apelblat, van’t Hoff, and Buchowski−Ksiazczak λh models were used to correlate the results. The overall uncertainties were less than 5.0% for all the models examined. The highest ITN mole fraction solubility was achieved as 1.01 × 10−1 in DMSO at 318.2 K; however, the least was achieved as 3.16 × 10−7 in water at 298.2 K. ITN solubility was found to be enhanced with an increase in temperature and the order in which it was soluble in several green solvents at 318.2 K was as follows: DMSO (1.01 × 10−1) > EA (1.73 × 10−2) > PEG-400 (1.66 × 10−2) > THP (1.59 × 10−2) > 2-BuOH (6.32 × 10−3) > 1-BuOH (5.88 × 10−3) > PG (4.83 × 10−3) > EtOH (3.51 × 10−3) > EG (3.49 × 10−3) > MeOH (2.10 × 10−3) > water (1.38 × 10−6). ITN−DMSO showed the strongest solute−solvent interactions when compared to the other ITN and green solvent combinations. According to thermodynamic studies, ITN dissolution was endothermic and entropy-driven in all of the green solvents tested. The obtained outcomes suggested that DMSO appears to be the best green solvent for ITN solubilization.

Solubility and Thermodynamic Properties of Febuxostat in Various (PEG 400 + Water) Mixtures

The solubility of the poorly soluble medicine febuxostat (FXT) (3) in various {polyethylene glycol 400 (PEG 400) (1) + water (H₂O) (2)} mixtures has been examined at 298.2-318.2 K and 101.1 kPa. FXT solubility was measured using an isothermal method and correlated with "van't Hoff, Apelblat, Buchowski-Ksiazczak λh, Yalkowsky-Roseman, Jouyban-Acree, and Jouyban-Acree-van't Hoff models". FXT mole fraction solubility was enhanced via an increase in temperature and PEG 400 mass fraction in {(PEG 400 (1) + H₂O (2)} mixtures. Neat PEG 400 showed the highest mole fraction solubility of FXT (3.11 × 10^-2 at 318.2 K), while neat H₂O had the lowest (1.91 × 10^-7 at 298.2 K). The overall error value was less than 6.0% for each computational model, indicating good correlations. Based on the positive values of apparent standard enthalpies (46.72-70.30 kJ mol^-1) and apparent standard entropies (106.4-118.5 J mol^-1 K^-1), the dissolution of FXT was "endothermic and entropy-driven" in all {PEG 400 (1) + H₂O (2)} mixtures examined. The main mechanism for FXT solvation in {PEG 400 (1) + H₂O (2)} mixtures was discovered to be an enthalpy-driven process. In comparison to FXT-H₂O, FXT-PEG 400 showed the strongest molecular interactions. In conclusion, these results suggested that PEG 400 has considerable potential for solubilizing a poorly soluble FXT in H₂O.

Psyllium-Husk-Assisted Synthesis of ZnO Microstructures with Improved Photocatalytic Properties for the Degradation of Methylene Blue (MB)

Wastewater from the textile industry is chronic and hazardous for the human body due to the presence of a variety of organic dyes; therefore, its complete treatment requires efficient, simple, and low cost technology. For this purpose, we grew ZnO microstructures in the presence of psyllium husk, and the role of psyllium husk was to modify the surface of the ZnO microstructures, create defects in the semiconducting crystal structures, and to alter the morphology of the nanostructured material. The growth process involved a hydrothermal method followed by calcination in air. Additionally, the psyllium husk, after thermal combustion, added a certain value of carbon into the ZnO nanomaterial, consequently enhancing the photocatalytic activity towards the degradation of methylene blue. We also investigated the effect of varying doses of photocatalyst on the photocatalytic properties towards the photodegradation of methylene blue in aqueous solution under the illumination of ultraviolet light. The structure and morphology of the prepared ZnO microstructures were explored by scanning electron microscopy (SEM) and powder X-ray diffraction (XRD) techniques. The degradation of methylene blue was monitored under the irradiation of ultraviolet light and in the dark. Also, the degradation of methylene blue was measured with and without photocatalyst. The photodegradation of methylene blue is highly increased using the ZnO sample prepared with psyllium husk. The photodegradation efficiency is found to be approximately 99.35% for this sample. The outperforming functionality of psyllium-husk-assisted ZnO sample is attributed to large surface area of carbon material from the psyllium husk and the synergetic effect between the incorporated carbon and ZnO itself. Based on the performance of the hybrid material, it is safe to say that psyllium husk has high potential for use where surface roughness, morphology alteration, and defects in the crystal structure are vital for the enhancing the functionality of a nanostructured material. The observed performance of ZnO in the presence of psyllium husk provides evidence for the fabrication of a low cost and efficient photocatalyst for the wastewater treatment problems.

Formulation of Chitosan-Coated Apigenin Bilosomes: In Vitro Characterization, Antimicrobial and Cytotoxicity Assessment

We prepared apigenin (APG)-loaded bilosomes (BLs) and evaluated them for vesicle size, zeta-potential and encapsulation efficiency. The formulations were prepared with cholesterol (CHL), sodium deoxy cholate (SDC), Tween 80 (T80) and phosphatidylcholine (PC) using solvent evaporation method. The prepared formulations showed the optimum result was coated with much mucoadhesive polymer chitosan (CH, 0.25 and 0.5% w/v). The chitosan-coated bilosomes (CH-BLs) were further evaluated for surface morphology, drug−polymer interaction, mucoadhesion, permeation, antimicrobial activity and cell viability. The prepared APG-BLs showed nano-metric size (211 ± 2.87 nm to 433 ± 1.98 nm), polydispersibility index <0.5, negative zeta potential (−15 to −29 mV) and enhanced encapsulation efficiency (69.5 ± 0.93 to 81.9 ± 1.3%). Based on these findings, selected formulation (F2) was further coated with chitosan and showed a marked increase in vesicle size (298 ± 3.56 nm), a positive zeta potential (+17 mV), superior encapsulation efficiency (88.1 ± 1.48%) and improved drug release (69.37 ± 1.34%). Formulation F2C1 showed significantly enhanced permeation and mucoadhesion (p < 0.05) compared to formulation F2 due to the presence of CH as a mucoadhesive polymer. The presence of CH on the surfaces of BLs helps to open the tight membrane junctions and leads to enhanced permeation. A TEM study revealed non-aggregated smooth surface vesicles. The antimicrobial and cell viability assessment revealed better effects in terms of zone of inhibition and cell line assessment against two different cancer cell line. From the study, it can be concluded that APG-CHBLs could be a superior alternative to conventional delivery systems.

A Greener Stability-Indicating High-Performance Thin-Layer Chromatography Approach for the Estimation of Topiramate

Despite various reported analytical methods for topiramate (TPM) analysis, greener analytical approaches are scarce in literature. As a consequence, the objective of the current research is to design a normal-phase stability-indicating high-performance thin-layer chromatography (SI-HPTLC) methodology for TPM analysis in marketed tablet dosage forms that is rapid, sensitive, and greener. TPM was derivatized densitometrically and analyzed at 423 nm in visible mode with anisaldehyde-sulfuric acid as the derivatizing agent. The greener SI-HPTLC technique was linear in the 30–1200 ng band⁻¹ range. In addition, the suggested SI-HPTLC methodology for TPM analysis was simple, rapid, cheaper, precise, robust, sensitive, and environmentally friendly. The greener SI-HPTLC method was able to detect TPM along with its degradation products under acid, base, and oxidative degradation conditions. However, no TPM degradation was recorded under thermal and photolytic stress conditions. TPM contents in commercial tablet dosage forms were recorded as 99.14%. Using 12 different principles of green analytical chemistry, the overall analytical GREEnness (AGREE) score for the greener SI-HPTLC method was calculated to be 0.76, confirming the proposed normal-phase SI-HPTLC method’s good greener nature. Overall, these results demonstrated that the suggested SI-HPTLC technique for TPM measurement in pharmaceutical products was reliable and selective.

Wasp venom peptide improves the proapoptotic activity of alendronate sodium in A549 lung cancer cells

BACKGROUND

Lung cancer in men and women is considered the leading cause for cancer-related mortality worldwide. Anti-cancer peptides represent a potential untapped reservoir of effective cancer therapy.

METHODOLOGY

Box-Behnken response surface design was applied for formulating Alendronate sodium (ALS)-mastoparan peptide (MP) nanoconjugates using Design-Expert software. The optimization process aimed at minimizing the size of the prepared ALS-MP nanoconjugates. ALS-MP nanoconjugates' particle size, encapsulation efficiency and the release profile were determined. Cytotoxicity, cell cycle, annexin V staining and caspase 3 analyses on A549 cells were carried out for the optimized formula.

RESULTS

The results revealed that the optimized formula was of 134.91±5.1 nm particle size. The novel ALS-MP demonstrated the lowest IC50 (1.3 ± 0.34 μM) in comparison to ALS-Raw (37.6 ± 1.79 μM). Thus, the results indicated that when optimized ALS-MP nanoconjugate was used, the IC50 of ALS was also reduced by half. Cell cycle analysis demonstrated a significantly higher percentage of cells in the G2-M phase following the treatment with optimized ALS-MP nanoconjugates.

CONCLUSION

The optimized ALS-MP formula had significantly improved the parameters related to the cytotoxic activity towards A549 cells, compared to control, MP and ALS-Raw.

Formulation and Evaluation of Luteolin-Loaded Nanovesicles: In Vitro Physicochemical Characterization and Viability Assessment

Luteolin (LT) is a natural polyphenol water-insoluble compound. LT-loaded nanovesicles (NVs) were prepared by using the solvent evaporation method. LT-NVs were prepared using cholesterol, phosphatidylcholine, span 60, and labrasol in a different composition. The prepared LT-NVs were evaluated for encapsulation efficiency, in vitro drug release, and permeation study. The optimized LT-NVs were further evaluated for antioxidant activity and cytotoxicity using the lung cancer cell line. LT-NVs showed nanometric size (less than 300 nm), an optimum polydispersibility index (less than 0.5), and a negative zeta potential value. The formulations also showed significant variability in the encapsulation efficiency (69.44 ± 0.52 to 83.75 ± 0.35%) depending upon the formulation composition. The in vitro and permeation study results revealed enhanced drug release as well as permeation profile. The formulation LT-NVs (F2) showed the maximum drug release of 88.28 ± 1.13%, while pure LT showed only 20.1 ± 1.21% in 12 h. The release data revealed significant variation (p < 0.001) in the release pattern. The permeation results also depicted significant (p < 0.001) enhancement in the permeation across the membrane. The enhanced permeation from LT-NVs was achieved due to the enhanced solubility of LT in the presence of the surfactant. The antioxidant activity results proved that LT-NVs showed greater activity compared to pure LT. The cytotoxicity study showed lesser IC50 value from LT-NVs than the pure LT. Thus, it can be concluded that LT-NVs are a natural alternative to the synthetic drug in the treatment of lung cancer.

Enhanced control of bioactivity of tissue plasminogen activator (tPA) through domain-directed enzymatic oxidation of terminal galactose

Introduction: In targeted enzyme prodrug constructs, it is critical to control the bioactivity of the drug in its prodrug form. The preparation of such constructs often involves conjugation reactions directed to functional groups on amino acid side chains of the protein, which result in random conjugation and incomplete control of bioactivity of a prodrug, which may result in significant nontarget effect. Thus, more specific method of modification is desired. If the drug is a glycoprotein, enzymatic oxidation may offer an alternative approach for therapeutic glycoproteins. Methods: Tissue plasminogen activator (tPA), a model glycoprotein enzyme, was treated with galactose oxidase (GO) and horseradish peroxidase, followed by thiolation reaction and conjugation with low molecular weight heparin (LMWH). The LMWH-tPA conjugate was isolated by ion-exchange chromatography followed by centrifugal filtration. The conjugate was characterized for its fibrinolytic activity and for its plasminogen activation through an indirect amidolytic assay with a plasmin-specific substrate S-2251 when LMWH-tPA conjugate is complexed with protamine-albumin conjugate, followed by triggered activation in the presence of heparin. Results: LMWH-tPA conjugate prepared via enzymatic oxidation retained ~95% of its fibrinolytic activity with respect to native tPA. Upon complexation with protamine-albumin conjugate, the activity of LMWH-tPA was effectively inhibited (~90%) whereas the LMWH-tPA prepared by random thiolation exhibited ~55% inhibition. Addition of heparin fully generated the activities of both conjugates. Conclusion: The tPA was successfully modified via enzymatic oxidation by GO, resulting in enhanced control of its activity in the prodrug construct. This approach can be applied to other therapeutic glycoproteins.

Development, Optimization and Evaluation of 2-Methoxy-Estradiol Loaded Nanocarrier for Prostate Cancer

The therapeutic efficacy of antineoplastic agents possessing a selective target to the nucleus of the cancer cells could be enhanced through novel formulation approaches. Thus, toward the improvement of the anticancer potential of 2-methoxy estradiol (2 ME) on prostate cancer, the drug was entrapped into the hydrophobic micelles core formulated with Phospholipon 90G and d-α-tocopheryl polyethylene glycol succinate (TPGS). Optimization of the formulation was done by Box-Behnken statistical design using Statgraphics software to standardize percentages of TPGS and phospholipid to obtain the smallest particle size. The optimized formulation was found to be spherical with nanometer size of 152 ± 5.2 nm, and low PDI (0.234). The entrapment efficiency of the micelles was 88.67 ± 3.21% with >93% release of 2 ME within 24 h. There was a 16-fold increase in apoptosis and an 8-fold increase in necrosis of the PC-3 cells when incubated with 2 ME micellar delivery compared to control cells (2.8 ± 0.2%). This increased apoptosis was further correlated with increased BAX expression (11.6 ± 0.7) and decreased BCL-2 expression (0.29 ± 0.05) in 2 ME micelles treated cells when compared to the control group. Further, loss of mitochondrial membrane potential (∼50-fold) by the drug-loaded micelles and free drug compared to control cells was found to be due to the generation of ROS. Findings on cell cycle analysis revealed the significant arrest of the G2-M phase of the PC-3 cells when incubated with the optimized formulation. Simultaneously, a significantly increased number of cells in pre-G1 revealed the maximum apoptotic potential of the drug when delivered via micellar formulation. Finally, upregulation of caspase-9, p53, and NO, with downregulation of TNF-α, NF-κβ, and inflammatory mediators of the PC-3 cells established the superiority of the micellar approach against prostate cancer. In summary, the acquired results highlighted the potentiality of the 2 ME-micellar delivery tool for controlling the growth of prostate cancer cells for improved efficacy.

Recent Progress in Lipid Nanoparticles for Cancer Theranostics: Opportunity and Challenges

Cancer is one of the major leading causes of mortality in the world. The implication of nanotherapeutics in cancer has garnered splendid attention owing to their capability to efficiently address various difficulties associated with conventional drug delivery systems such as non-specific biodistribution, poor efficacy, and the possibility of occurrence of multi-drug resistance. Amongst a plethora of nanocarriers for drugs, this review emphasized lipidic nanocarrier systems for delivering anticancer therapeutics because of their biocompatibility, safety, high drug loading and capability to simultaneously carrying imaging agent and ligands as well. Furthermore, to date, the lack of interaction between diagnosis and treatment has hampered the efforts of the nanotherapeutic approach alone to deal with cancer effectively. Therefore, a novel paradigm with concomitant imaging (with contrasting agents), targeting (with biomarkers), and anticancer agent being delivered in one lipidic nanocarrier system (as cancer theranostics) seems to be very promising in overcoming various hurdles in effective cancer treatment. The major obstacles that are supposed to be addressed by employing lipidic theranostic nanomedicine include nanomedicine reach to tumor cells, drug internalization in cancer cells for therapeutic intervention, off-site drug distribution, and uptake via the host immune system. A comprehensive account of recent research updates in the field of lipidic nanocarrier loaded with therapeutic and diagnostic agents is covered in the present article. Nevertheless, there are notable hurdles in the clinical translation of the lipidic theranostic nanomedicines, which are also highlighted in the present review along with plausible countermeasures.

Application of Green Nanoemulsion for Elimination of Rifampicin from a Bulk Aqueous Solution

The study aimed to prepare green nanoemulsion (GNE) multi-components ((water/dimethyl sulfoxide-transcutol/isopropyl alcohol/capmul MCM C8 (CMC8)) to remove rifampicin (RIF) from a contaminated aqueous bulk solution. Pseudo ternary phase diagrams dictated several batches of GNE prepared following the reported method. Selected nanoemulsions (NF1-NF5) were characterized for morphology, globular size, size distribution (polydispersity index, PDI), viscosity, zeta potential, refractive index (RI), and free-thaw kinetic stability. They were investigated for percent removal efficiency (%RE) of RIF from the bulk aqueous solution for varied time intervals (10-60 min). Finally, scanning electron microscopy-energy dispersive x-ray (SEM-EDX) and inductive coupled plasma-optical emission system (ICP-OE) were used to confirm the extraction of trace content of dimethyl sulfoxide (DMSO) and others in the treated water. Considering the data obtained for globule size, PDI, viscosity, zeta potential, freeze-thaw stability, and refractive index, NF5 was the most suitable for RIF removal. The largest %RE value (91.7%) was related to NF5, which may be prudent to correlate with the lowest value (~39 nm) of size (maximum surface area available for contact adsorption), PDI (0.112), and viscosity (82 cP). Moreover, %RE was profoundly influenced by the content of CMC8 and the aqueous phase. These two phases had immense impact on the viscosity, size, and RI. The percent content of water, Smix, and CMC8 were 15% w/w), 60% w/w, and 25% w/w, respectively in NF5. SEM-EDX and ICP-OE confirmed the absence of DMSO and other hydrophilic components in the treated water. Thus, efficient NF5 could be a promising option to the conventional method to decontaminate the polluted aqueous system.

Experimental Solubility, Thermodynamic/Computational Validations, and GastroPlus-Based In Silico Prediction for Subcutaneous Delivery of Rifampicin

We focused to explore a suitable solvent for rifampicin (RIF) recommended for subcutaneous (sub-Q) delivery [ethylene glycol (EG), propylene glycol (PG), tween 20, polyethylene glycol-400 (PEG400), oleic acid (OA), N-methyl-2-pyrrolidone (NMP), cremophor-EL (CEL), ethyl oleate (EO), methanol, and glycerol] followed by computational validations and in-silico prediction using GastroPlus. The experimental solubility was conducted over temperature ranges T = 298.2-318.2 K) and fixed pressure (p = 0.1 MPa) followed by validation employing computational models (Apelblat, and van't Hoff). Moreover, the HSPiP solubility software provided the Hansen solubility parameters. At T = 318.2K, the estimated maximum solubility (in term of mole fraction) values of the drug were in order of NMP (11.9 × 10^-2) ˃ methanol (6.8 × 10^-2) ˃ PEG400 (4.8 × 10^-2) ˃ tween 20 (3.4 × 10^-2). The drug dissolution was endothermic process and entropy driven as evident from "apparent thermodynamic analysis". The activity coefficients confirmed facilitated RIF-NMP interactions for increased solubility among them. Eventually, GastroPlus predicted the impact of critical input parameters on major pharmacokinetics responses after sub-Q delivery as compared to oral delivery. Thus, NMP may be the best solvent for sub-Q delivery of RIF to treat skin tuberculosis (local and systemic) and cutaneous related disease at explored concentration.

Glycemic Index of Gluten-Free Bread and Their Main Ingredients: A Systematic Review and Meta-Analysis

This study aimed to perform a systematic review and meta-analysis of the glycemic index (GI) of gluten-free bread (GFB) and its main ingredients. The systematic review followed PRISMA guidelines, using seven electronic databases (PubMed, EMBASE, Scopus, Science Direct, Web of Science, gray literature research with Google Scholar, and patents with Google Patent tool), from inception to November 2020. Eighteen studies met the inclusion criteria evaluating 132 GFB samples. Five articles tested GI in vivo, eleven in vitro; and two studies tested both methods. The analysis showed that 60.7% (95% CI: 40.2-78.1%) of the samples presented high glycemic indexes, evidencing a high glycemic profile for GFB. Only 18.2% (95% CI: 11.7-27.2%) of the bread samples presented in the studies were classified as a low GI. Meta-analysis presented moderate/low heterogenicity between studies (I2 = 61% and <1% for both high and low GIs) and reinforced the proportion of high GIs. Lower GIs were found in formulations based on Colocasia esculenta flour or enriched with fiber, yogurt and curd cheese, sourdough, psyllium, hydrocolloids, enzymes, fructans, and resistant starch, highlighting the efficacy of these ingredients to lower GFBs' GI. GFB tends to present high GI, impacting the development of chronic diseases when consumed.

Cytotoxic and Pro-Apoptotic Effects of a Sub-Toxic Concentration of Fluvastatin on OVCAR3 Ovarian Cancer Cells After its Optimized Formulation to Melittin Nano-Conjugates

Fluvastatin (FLV) is a hydroxymethylglutaryl coenzyme A (HMG-CoA) reductase inhibitor often used to lower total and low-density lipoprotein (LDL) cholesterol and for the prevention of adverse cardiovascular events. This drug as well as melittin (MEL), the major component of honeybee venom (Apis mellifera), has shown antineoplastic activity, then representing promising approaches for cancer therapy. However, adverse effects related to the use of FLV and MEL have been reported and very few studies have been carried out to obtain an optimized formulation allowing for combining the two drugs and then maximizing the anticancer activity, then minimizing the needed dosage. In the present study, an optimized formulation in terms of minimized particle size and maximized zeta potential was investigated for its cytotoxic potential in human OVCAR3 ovarian cancer cells. FLV-MEL nano-conjugates, containing a sub-toxic concentration of drug, demonstrated an improved cytotoxic potential (IC50 = 2.5 µM), about 18-fold lower, compared to the free drug (IC50 = 45.7 µM). Cell cycle analysis studies demonstrated the significant inhibition of the OVCAR3 cells proliferation exerted by FLV-MEL nano-conjugates compared to all the other treatments, with a higher percentage of cells accumulating on G2/M and pre-G1 phases, paralleled by lower percentage of cells in G0/G1 and S phases. The synergistic antineoplastic activity of FLV and MEL combined in the optimized formula was also showed by the marked pronecrotic and pro-apoptotic activities, the latter mediated by the modulation of BAX/BCL-2 ratio in favor of BAX. Our optimized FLV-MEL formulation might therefore represents a novel path for the development of specific and more effective antineoplastic drugs directed against ovarian cancer.

Pluronic-Coated Biogenic Gold Nanoparticles for Colon Delivery of 5-Fluorouracil: In vitro and Ex vivo Studies

The aim of the study was to prepare 5-fluorouracil (5-FU)-loaded biogenic gold nanoparticles with pluronic-based coating (PFGNPs), their optimization (full factorial predicted OBPN-1) and in vitro-ex vivo evaluation. Several formulations were prepared, selected for optimization using Design Expert®, and compared for morphology, 5-FU release kinetics, compatibility, cell line toxicity, in vitro hemocompatibility, and ex vivo intestinal permeation across the rat duodenum, jejunum, and ileum. The pluronic-coated 5-FU-carrying GNPs were spherical, 29.11-178.21 nm in diameter, with a polydispersity index (PDI) range of 0.191-292, and a zeta potential (ZP) range of 11.19-29.21 (-mV). The optimized OBPN-1 (desirability = 0.95) demonstrated optimum size (175.1 nm), %DL as 73.8%, ZP as 21.7 mV, % drug release (DR) as 75.7%, and greater cytotoxicity (viability ~ 8.9%) against the colon cancer cell lines than 5-FU solution (~ 24.91%), and less hemocompatibility. Moreover, OBPN-1 exhibited 4.5-fold permeation across the rat jejunum compared with 5-FU solution. Thus, the PFGNPs exhibit high DL capacity, sustained delivery, hemocompatibility, improved efficacy, and enhanced permeation profiles compared with 5-FU solution and several other NPs preparations suggesting it is a promising formulation for effective colon cancer control with reduced side effects.

Pluronic® F127-mediated control of insulin release rates from NPH microcrystals and blood glucose depression in STZ-induced diabetic rats

Introduction: Neutral protamine Hagedorn (NPH) insulin is an intermediate-acting basal insulin with a long history of clinical use, consisting native human insulin. Its rather undesirable action profile, characterized by a peak release within a few hours, followed by insufficient insulin delivery upon a single subcutaneous (s.c.) dose, is well-documented. This may have been caused by the inherent microcrystal structure involving the basic peptide protamine, as well as the presence of tissue enzyme activities that readily act on protamine at the injection site. This issue may be circumvented by utilizing thermosensitive, erodible Pluronic F127 (PF127) to modulate the kinetics of insulin release from NPH over a period of 24 hours in which the hydrogel is completely eroded.

Methods: Previously, we have shown that insulin release rates in vitro from NPH/PF127 formulations (0-25% PF127) markedly reduced the initial insulin release, especially in the presence of enzyme activity that selectively degraded protamine at 1-5 U/mL. Insulin release over the course of 20 hours was better modulated in the presence of increasing PF127 content. In this study, the insulin formulations (0, 20, and 25% PF127) were administered s.c. (4 U/kg) to streptozotocin (STZ)-induced diabetic rats and blood glucose levels were monitored over 24 hours.

Results: In vivo blood glucose depression profiles in STZ-induced diabetic rats exhibited a similar pattern of control to in vitro data at the single s.c. dose of 4 U/kg, apparently extending the duration of action of NPH over a 24-hour period in the presence of PF127.

Conclusion: Our findings suggest that the undesirable kinetics of insulin release from NPH is significantly influenced by tissue enzyme activity and that the presence of PF127 provided a timely modulation of insulin release from NPH microcrystals in the STZ-induced diabetic rat model.

Diverse Pharmacological Potential of Various Furanone Derivatives: A Mini-Review

Abstract::

Furanone is present in many natural compounds. Furanone derivatives are playing important roles in pharmaceutical medicinal and organic chemistry. Various furanone derivatives were exhibited their different pharmacological activities such as antimicrobial, anti-inflammatory, anticancer, antiviral, antioxidant, and other anticipated activities. Furanone derivatives were also used as intermediate for synthesis of other organic compounds. In this review, we studied different types of pharmacological activities of several furanone derivatives.