Ultrathin NiV Layered Double Hydroxide for Methanol Electrooxidation: Understanding the Proton Detachment Kinetics and Methanol Dehydrogenation Oxidation

Electrochemical methanol oxidation reaction (MOR) is regarded as a promising pathway to obtain value-added chemicals and drive cathodic H2 production, while the rational design of catalyst and in-depth understanding of the structure-activity relationship remains challenging. Herein, the ultrathin NiV-LDH (u-NiV-LDH) with abundant defects is successfully synthesized, and the defect-enriched structure is finely determined by X-ray adsorption fine structure etc. When applied for MOR, the as-prepared u-NiV-LDH presents a low potential of 1.41 V versus RHE at 100 mA cm-2, which is much lower than that of bulk NiV-LDH (1.75 V vs RHE) at the same current density. The yield of H2 and formate is 98.2% and 88.1% as its initial over five cycles and the ultrathin structure of u-NiV-LDH can be well maintained. Various operando experiments and theoretical calculations prove that the few-layer stacking structure makes u-NiV-LDH free from the interlayer hydrogen diffusion process and the hydrogen can be directly detached from LDH laminate. Moreover, the abundant surface defects upshift the d-band center of u-NiV-LDH and endow a higher local methanol concentration, resulting in an accelerated dehydrogenation kinetics on u-NiV-LDH. The synergy of the proton detachment from the laminate and the methanol dehydrogenation oxidation contributes to the excellent MOR performance of u-NiV-LDH.

Revealing the synergistic effect of Ni single atoms and adjacent 3d metal doped Ni nanoparticles in electrocatalytic CO2 reduction

Herein, we report the successful fabrication of a series of transition metal doped Ni nanoparticles (NPs) coordinated with Ni single atoms in nitrogen-doped carbon nanotubes (denoted as Ni1+NPsM-NCNTs, M = Mn, Fe, Co, Cu and Zn; Ni1 = Ni single atom). X-ray absorption fine structure reveals the coexistence of Ni single atoms with Ni-N4 coordination and NiM NPs. When applied for electrocatalytic CO2RR, the Ni1+NPsM-NCNT compounds show the Faradaic efficiency of CO (FECO) with a volcano-like tendency of Mn < Fe ≈ Co < Zn < Cu, in which the Ni1+NPsCu-NCNT exhibits the highest FECO of 96.92%, a current density of 171.25 mA cm-2 and a sustainable stability over 24 hours at a current density of 100 mA cm-2, outperforming most reported examples in the literature. Detailed experiments and theoretical calculations reveal that for Ni1+NPsCu-NCNTs, the electron transfer from NiCu NPs to Ni single atoms strengthens the adsorption of *COOH intermediates. Moreover, the d-band center of Ni-N in Ni1+NPsCu-NCNT is upshifted, providing stronger binding with the reaction intermediates of *COOH, whereas the NiCu NPs increase the Gibbs free energy change of the Volmer step, suppressing the competitive HER.

[Thoughts and suggestions on digital services to enhance the level of vaccination management]

With the development of information technology and the increasing demand for vaccination services among the people, it is a definite trend to enhance the quality of vaccination services through digitization. This article starts with a clear concept of digital services for vaccination, introduces the current development status in China and abroad, analyzes the advantages and disadvantages of existing models in leading regions, takes a glean from the summation, and proposes targeted solutions. This study suggests establishing a departmental coordination mechanism for data interconnection and sharing, formulating data standards and functional specifications, enhancing the functionalities of the immunization planning information system, strengthening data collection and analytical usage, and intensifying appointment management and science and health education to provide expert guidance for the construction of digital vaccination services across the country in the future.

Interfacial Preparation of Polyoxometalate-Based Hybrid Supramolecular Polymers by Orthogonal Self-Assembly

The construction of organic-inorganic hybrid supramolecular polymers using polyoxometalate (POM) as building block is expected to bring new opportunities to the functionalization of supramolecular polymers and the development of novel POM-based soft materials. Here, by using the orthogonal self-assembly based on host-guest interactions and metal-ligand interactions, we report the in situ construction of a novel POM-based hybrid supramolecular polymer (POM-SP) at the oil-water interface, while the redox and competitive responsiveness can be triggered independently. Moreover, the binding energy of POM-SP at the interface is sufficiently strong so that the assembly of POM-SP jams, allowing the stabilization of liquids in nonequilibrium shapes, offering the possibility of fabricating all-liquid constructs with reconfigurability.

Self-Assembly of Polyoxometalate-Based Nanoparticle Surfactants in Solutions

Nanoparticle surfactants (NPSs) are an emergent class of amphiphiles attractive for their controllable assembly at the liquid-liquid interface. In this work, intriguing self-assembly behavior and stimuli-responsiveness of NPSs in homogeneous solutions are presented. With β-cyclodextrin-grafted polyoxometalates (POMs) and ferrocene (or azobenzene)-terminated polystyrene in water/tetrahydrofuran, POM-based NPSs are formed via host-guest interactions and self-organize to vesicles driven by solvent-phobic effects. The tunable supramolecular interactions allow these assemblies to be responsive to redox or light stimulus, respectively, affording an on-demand assembly/disassembly capacity that shows promise in delivery and release applications.

Polyoxometalates as Potential Artificial Enzymes toward Biological Applications

Artificial enzymes, as alternatives to natural enzymes, have attracted enormous attention in the fields of catalysis, biosensing, diagnostics, and therapeutics because of their high stability and low cost. Polyoxometalates (POMs), a class of inorganic metal oxides, have recently shown great potential in mimicking enzyme activity due to their well-defined structure, tunable composition, high catalytic efficiency, and easy storage properties. This review focuses on the recent advances in POM-based artificial enzymes. Different types of POMs and their derivatives-based mimetic enzyme functions are covered, as well as the corresponding catalytic mechanisms (where available). An overview of the broad applications of representative POM-based artificial enzymes from biosensing to theragnostic is provided. Insight into the current challenges and the future directions for POMs-based artificial enzymes is discussed.

[Current status of vaccination services for adults in urban and rural areas of nine provinces in China from 2019 to 2021]

Objective: To understand the current situation of vaccination services for adults in China, explore how to establish a stable and efficient vaccination service system for adults, and provide reference for formulating corresponding policies. Methods: The vaccination information systems of nine provinces in China were used to obtain information on urban and rural vaccination of influenza vaccine, 23-valent pneumococcal polysaccharide vaccine (PPV23), and human papillomavirus vaccine (HPV) from 2019 to 2021. The indicator, vaccination rate/full vaccination rate, was used for statistical description. Results: The vaccination rate/full vaccination rate of the three vaccines in eastern China was generally higher than that in central and western China. The vaccination rate/full vaccination rate in urban areas was generally higher than that in rural areas. From 2019 to 2021, the vaccination rates of influenza vaccine among people aged 60 years and above in urban and rural areas were 2.96%, 6.29%, 6.14% and 1.29%, 2.58%, 2.94%, respectively. The vaccination rates of the PPV23 among people aged 60 years and above in urban and rural areas increased year by year, with rates of 0.38%, 1.05%, 1.15% and 0.14%, 0.49%, 0.59%, respectively. From 2019 to 2021, the HPV coverage of female adults aged 27-45 years in urban and rural areas increased year by year, with rates of 0.46%, 0.93%, 1.88% and 0.17%, 0.40%, 1.08%, respectively. Conclusion: The vaccination rates of influenza vaccine,PPV23 vaccine and HPV vaccine for adults in China are relatively low, with higher rates in the eastern region than in the central and western regions, and higher rates in urban areas than in rural areas. It is recommended to formulate corresponding health and economic policies and explore a suitable vaccination service system for adults in China to improve vaccination rates.

A pseudo-Double-Network Hydrogel Built upon Layered Double Hydroxides with Self-Strengthening Properties

While great achievements have been made in the development of mechanically robust nanocomposite hydrogels, incorporating multiple interactions on the bases of two demensional inorganic cross-linkers to construct self-strengthening hydrogels has rarely been investigated. To this end, we propose here a new method for the coupling the dynamic covalent bonds and non-covalent interactions within a pseudo double-network system. The pseudo first network, formed through the Schiff Base reation between Tris-modified layered double hydroxides (Tris-LDHs) and oxidized dextran (ODex), is linked to the second network built upon non-covalent interactions between Tris-LDHs and poly(acrylamide-co-2-acrylamido-2-methyl-propanesulfonate) (p-(AM-co-AMPS). The swelling and mechanical properties of the resulting hydrogels have been investigated as a function of the ODex and AMPS contents. The as-prepared hydrogel can swell to 420 times of its original size and retain more than 99.9 wt.% of water. Mechanical tests show that the hydrogel can bear 90 % of compression and is able to be stretched to near 30 times of its original length. Cyclic tensile tests reveal that the hydrogels are capable of self-strengthening after mechanical training. The unique energy dissipation mechanism based on the dynamic covalent and non-covalent interactions is considered to be responsible for the outstanding swelling and mechanical performances.

[Considerations for the development of adult vaccination in China]

Adult vaccination is an important component of the life-course immunization for all. Strengthening adult vaccination in China contributes to shrinking immunization gaps between regions and groups, enhancing the overall immunity of our population, and promoting health equity and social prosperity. Chinese adults bear the heavy burden of vaccine preventable diseases such as influenza, pneumococcal diseases and shingles, and have low coverage of vaccines against those diseases, so it is necessary to make efforts to improve adult vaccination development. This article focuses on elaborating the values of adult vaccination, introducing the current status of adult vaccination abroad, and analyzing the challenges and existing foundations for China to provide adult vaccination, and makes suggestions for the building and development of adult vaccination.

Recent Progress of Remediating Heavy Metal Contaminated Soil Using Layered Double Hydroxides as Super-Stable Mineralizer

Heavy metal contamination in soil, which is harmful to both ecosystem and mankind, has attracted worldwide attention from the academic and industrial communities. However, the most-widely used remediation technologies such as electrochemistry, elution, and phytoremediation. suffer from either secondary pollution, long cycle time or high cost. In contrast, in situ mineralization technology shows great potential due to its universality, durability and economical efficiency. As such, the development of mineralizers with both high efficiency and low-cost is the core of in situmineralization. In 2021, the concept of 'Super-Stable Mineralization' was proposed for the first time by Kong et al.[1] The layered double hydroxides (denoted as LDHs), with the unique host-guest intercalated structure and multiple interactions between the host laminate and the guest anions, are considered as an ideal class of materials for super-stable mineralization. In this review, we systematically summarize the application of LDHs in the treatment of heavy metal contaminated soil from the view of: 1) the structure-activity relationship of LDHs in in situ mineralization, 2) the advantages of LDHs in mineralizing heavy metals, 3) the scale-up preparation of LDHs-based mineralizers and 4) the practical application of LDHs in treating contaminated soil. At last, we highlight the challenges and opportunities for the rational design of LDH-based mineralizer in the future.

Pd Loaded NiCo Hydroxides for Biomass Electrooxidation: Understanding the Synergistic Effect of Proton Deintercalation and Adsorption Kinetics

The key issue in the 5-hydroxymethylfurfural oxidation reaction (HMFOR) is to understand the synergistic mechanism involving the protons deintercalation of catalyst and the adsorption of the substrate. In this study, a Pd/NiCo catalyst was fabricated by modifying Pd clusters onto a Co-doped Ni(OH)2 support, in which the introduction of Co induced lattice distortion and optimized the energy band structure of Ni sites, while the Pd clusters with an average size of 1.96 nm exhibited electronic interactions with NiCo support, resulting in electron transfer from Pd to Ni sites. The resulting Pd/NiCo exhibited low onset potential of 1.32 V and achieved a current density of 50 mA/cm2 at only 1.38 V. Compared to unmodified Ni(OH)2 , the Pd/NiCo achieved an 8.3-fold increase in peak current density. DFT calculations and in situ XAFS revealed that the Co sites affected the conformation and band structure of neighboring Ni sites through CoO6 octahedral distortion, reducing the proton deintercalation potential of Pd/NiCo and promoting the production of Ni3+ -O active species accordingly. The involvement of Pd decreased the electronic transfer impedance, and thereby accelerated Ni3+ -O formation. Moreover, the Pd clusters enhanced the adsorption of HMF through orbital hybridization, kinetically promoting the contact and reaction of HMF with Ni3+ -O.

Laser-Triggered High Graphitization of Mo2C@C: High Rate Performance and Excellent Cycling Stability as Anode of Lithium Ion Batteries

Fast electron/ion transport and cycling stability of anode materials are key factors for achieving a high rate performance of battery materials. Herein, we successfully fabricated a carbon-coated Mo2C nanofiber (denoted as laser Mo2C@C) as the lithium ion battery anode material by laser carbonization of PAN-PMo12 (PAN = Polyacrylonitrile; PMo12 = H3PMo12O40). The highly graphitized carbon layer in laser Mo2C@C effectively protects Mo2C from agglomeration and flaking while facilitating electron transfer. As such, the laser Mo2C@C electrode displays an excellent electrochemical stability under 5 A g-1, with a capacity up to 300 mA h g-1 after 3000 cycles. Furthermore, the extended X-ray absorption fine structure results show the existence of some Mo vacancies in Mo2C@C. Density functional theory calculations further prove that such vacancies make the defective Mo2C@C composites energetically more favorable for lithium storage in comparison with the intact Mo2C.

Enabling Specific Benzene Oxidation by Tuning the Adsorption Behavior on Au Loaded MgAl Layered Double Hydroxides

Direct and selective oxidation of benzene to phenol is a long-term goal in industry. Although great efforts have been made in homogenous catalysis, it still remains a huge challenge to drive this reaction via heterogeneous catalysts under mild conditions. Herein, a single-atom Au loaded MgAl-layered double hydroxide (Au1 -MgAl-LDH) with a well-defined structure, in which the Au single atoms are located on the top of Al3+ with Au-O4 coordination as revealed by extended x-ray-absorption fine-structure (EXAFS)and density-functional theory (DFT)calculation is reported. The photocatalytic results prove the Au1 -MgAl-LDH is capable of driving benzene oxidation reaction with O2 in water, and exhibits a high selectivity of 99% for phenol. While contrast experiment shows a ≈99% selectivity for aliphatic acid with Au nanoparticle loaded MgAl-LDH (Au-NP-MgAl-LDH). Detailed characterizations confirm that the origin of the selectivity difference can be attributed to the profound adsorption behavior of substrate benzene with Au single atoms and nanoparticles. For Au1 -MgAl-LDH, single Au-C bond is formed in benzene activation and result in the production of phenol. While for Au-NP-MgAl-LDH, multiple AuC bonds are generated in benzene activation, leading to the crack of CC bond.

Recent Advances in the Study of Trivalent Lanthanides and Actinides by Phosphinic and Thiophosphinic Ligands in Condensed Phases

The separation of trivalent actinides and lanthanides is a key step in the sustainable development of nuclear energy, and it is currently mainly realized via liquid-liquid extraction techniques. The underlying mechanism is complicated and remains ambiguous, which hinders the further development of extraction. Herein, to better understand the mechanism of the extraction, the contributing factors for the extraction are discussed (specifically, the sulfur-donating ligand, Cyanex301) by combing molecular dynamics simulations and experiments. This work is expected to contribute to improve our systematic understanding on a molecular scale of the extraction of lanthanides and actinides, and to assist in the extensive studies on the design and optimization of novel ligands with improved performance.

Photocatalytic Oxidative Coupling of Ethane to n-Butane Using CO2 as a Soft Oxidant over NiTi-Layered Double Hydroxide

Selective conversion of ethane (C2 H6 ) to high-value-added chemicals is a very important chemical process, yet it remains challenging owing to the difficulty of ethane activation. Here, a NiTi-layered double hydroxide (NiTi-LDH) photocatalyst is reported for oxidative coupling of ethane to n-butane (n-C4 H10 ) by using CO2 as an oxidant. Remarkably, the as-prepared NiTi-LDH exhibits a high selectivity for n-C4 H10 (92.35%) with a production rate of 62.06 µmol g-1 h-1 when the feed gas (CO2 /C2 H6 ) ratio is 2:8. The X-ray absorption fine structure (XAFS) and photoelectron characterizations demonstrate that NiTi-LDH possesses rich vacancies and high electron-hole separation efficiency, which can promote the coupling of C2 H6 to n-C4 H10 . More importantly, density functional theory (DFT) calculations reveal that ethane is first activated on the oxygen vacancies of the catalyst surface, and the C─C coupling pathway is more favorable than the C─H cleavage to C2 H4 or CH4 , resulting in the high production rate and selectivity for n-C4 H10 .

Vanadium-Substituted Polyoxometalates Regulate Prion Protein Fragment 106-126 Misfolding by an Oxidation Strategy

Prion disorders are a group of lethal infectious neurodegenerative diseases caused by the spontaneous aggregation of misfolded prion proteins (PrP^Sc). The oxidation of such proteins by chemical reagents can significantly modulate their aggregation behavior. Herein, we exploit a series of vanadium-substituted Keggin-type tungsten and molybdenum POMs (W- and Mo-POMs) as chemical tools to oxidize PrP106-126 (denoted as PrP), an ideal model for studying PrP^Sc. Due to the band gaps being larger than that of Mo-POMs, W-POMs possess higher structural stability and show stronger binding and oxidation effect on PrP. Additionally, the substitution of W/Mo by vanadium elevates the local electron distribution on the bridged O(26) atom, thereby strengthening the hydrogen bonding of POMs with the histidine site. Most importantly, with the number of substituted vanadium increases, the LUMO energy level of POMs decreases, making it easier to accept electrons from methionine. As a result, PW₁₀V₂ displays the strongest oxidation on the methionine residue of PrP, leading to an excellent inhibitory effect on PrP aggregation and a significant attenuation on its neurotoxicity.

Coexistence of Au single atoms and Au nanoparticles on NiAl-LDH for selective electrooxidation of benzyl alcohol to benzaldehyde

Introducing different active sites into heterogeneous catalysts provides new prospects to address the challenges in single-atom catalysis. Herein, the Au single atoms together and the Au nanoparticles were loaded onto NiAl-LDH by a facile impregnation-reduction method for the first time, resulting in the formation of Au_1+n-NiAl-LDH, in which abundant Au single atoms are located around the Au nanoparticles with ∼5 nm size. When applied in the electrocatalytic benzyl alcohol oxidation reaction (BAOR), the as-prepared Au_1+n-NiAl-LDH exhibits a remarkable selectivity of 91% and 177.63 μmol for benzaldehyde in 5 hours, while in contrast examples using solely Au single atom loaded NiAl-LDH (Au₁-NiAl-LDH) and solely Au nanoparticle loaded NiAl-LDH (Au_n-NiAl-LDH) can only realize 87.36 μmol production (75% selectivity) and 48.90 μmol production (28% selectivity) of benzaldehyde, respectively. Such a dramatic difference can be attributed to the synergistic effects of Au single atoms and Au nanoparticles. DFT calculation results reveal that for Au_1+n-NiAl-LDH, Au single atoms promote the dehydrogenation capacity of LDH laminates, while Au nanoparticles offer adsorption sites for the electrophilic attachment of benzyl alcohol.

Insight into the In-Situ Encapsulation-Reassembly Strategy To Fabricate PW12@NiCo-LDH Acid-Base Bifunctional Catalysts

Acid-base bifunctional catalysts have attracted increasing attention due to the improved overall efficiency of synthetic reactions. Herein, we reported the successful fabrication of a PW₁₂@NiCo-LDH acid-base bifunctional catalyst by using the in-situ encapsulation-reassembly strategy. The evolution process of morphology and structure was monitored carefully by various time-dependent characterizations. X-ray absorption fine structure (XAFS) and density functional theory (DFT) calculations demonstrated that the terminal oxygen of PW₁₂ in PW₁₂@NiCo-LDH preferred to assemble with the oxygen vacancies on NiCo-LDH. When applied for deacetalization-Knoevenagel condensation, the PW₁₂@NiCo-LDH displayed >99% conversion of benzaldehyde dimethyl acetal (BDMA) and >99% yield of ethyl α-cyanocinnamate (ECC). Moreover, PW₁₂@NiCo-LDH can be recycled at least 10 cycles without obvious structural change, which can be attributed to the confinement of PW₁₂ into the NiCo-LDH nanocage. Such excellent catalytic activity of PW₁₂@NiCo-LDH was benefited from the short mass transfer pathway between acid sites and base sites, which was caused by the stable assembly between PW₁₂ and NiCo-LDH.

Recent Advances in Confining Polyoxometalates and the Applications

Polyoxometalates (POMs) are widely used in catalysis, energy storage, biomedicine, and other research fields due to their unique acidity, photothermal, and redox features. However, the leaching and agglomeration problems of POMs greatly limit their practical applications. Confining POMs in a host material is an efficient tool to address the above-mentioned issues. POM@host materials have received extensive attention in recent years. They not only inherent characteristics of POMs and host, but also play a significant synergistic effect from each component. This review focuses on the recent advances in the development and applications of POM@host materials. Different types of host materials are elaborated in detail, including tubular, layered, and porous materials. Variations in the structures and properties of POMs and hosts before and after confinement are highlighted as well. In addition, an overview of applications for the representative POM@host materials in electrochemical, catalytic, and biological fields is provided. Finally, the challenges and future perspectives of POM@host composites are discussed.

A coumarin-pyrazole-based probe for the fluorescence detection of phosgene with high selectivity and sensitivity

The high toxicity of phosgene poses potential threats to public health and safety. In this work, a novel fluorescent probe was designed to detect phosgene using hydroxyl and pyrazole moieties as the recognition sites. The response to phosgene with probe 1 was fast (less than 30 s), highly selective and sensitive with the limit of detection being 4.78 nM in solution. Furthermore, probe 1 was employed to conveniently fabricate paper test strips for efficiently detecting phosgene gas. The limit of detection was obtained as 0.014 ppm by using a smartphone RGB app, revealing that probe 1 has good prospects for sensitively detecting phosgene gas.

Pore "Softening" and Emergence of Breathability Effects of New Keplerate Nano-Containers

The self-assembly of porous molecular nanocapsules offer unique opportunities to investigate a range of interesting phenomena and applications. However, to design nanocapsules with pre-defined properties, thorough understanding of their structure-property relation is required. Here, we report the self-assembly of two elusive members of the Keplerate family, [Mo132 Se60 O312 (H2 O)72 (AcO)30 ]42- {Mo132 Se60 } 1 and [W72 Mo60 Se60 O312 (H2 O)72 (AcO)30 ]42- {W72 Mo60 Se60 } 2, that have been synthesised using pentagonal and dimeric ([Mo2 O2 Se2 ]2+ ) building blocks and their structures have been confirmed via single crystal X-ray diffractions. Our comparative study involving the uptake of organic ions and the related ligand exchange of various ligand sizes by the {Mo132 Se60 } and previously reported Keplerates {Mo132 O60 }, {Mo132 S60 } based on the ligand exchange rates, revealed the emergence of increased "breathability" that dominates over the pore size as we transition from the {Mo132 S60 } to the "softer" {Mo132 Se60 } molecular nano-container.

Revealing the Kinetic Balance between Proton-Feeding and Hydrogenation in CO2 Electroreduction

Electrocatalytic reduction of CO₂ to high-value-added chemicals provides a feasible path for global carbon balance. Herein, the fabrication of Ni_{NP x} @Ni_{SA y} -NG (x,y = 1, 2, 3; NG = nitrogen-doped graphite) is reported, in which Ni single atom sites (Ni_SA ) and Ni nanoparticles (Ni_NP ) coexist. These Ni_{NP x} @Ni_{SA y} -NG presented a volcano-like trend for maximum CO Faradaic efficiency (FE_CO ) with the highest point at Ni_NP2 @Ni_SA2 -NG in CO₂ RR. Ni_NP2 @Ni_SA2 -NG exhibited ≈98% of maximum FE_CO and a large current density of -264 mA cm^-2 at -0.98 V (vs. RHE) in the flow cell. In situ experiment and density functional theory (DFT) calculations confirmed that the proper content of Ni_SA and Ni_NP balanced kinetic between proton-feeding and CO₂ hydrogenation. The Ni_NP in Ni_NP2 @Ni_SA2 -NG promoted the formation of H* and reduced the energy barrier of *CO₂ hydrogenation to *COOH, and CO desorption can be efficiently facilitated by Ni_SA sites, thereby resulting in enhanced CO₂ RR performance.

Insight of Cd2+ removal by MgAl-LDHs with different host-guest interactions

Layered double hydroxides (LDHs) have shown great potential as adsorbents for the removal of heavy metals. Nevertheless, howthe host-guest interactions of LDHs affect the removal mechanism remains to be less explored. Herein, we fabricated CO32-/NO3-/SO42-/Cl- intercalated MgAl-LDHs with different host-guest interactions and investigated their removal mechanism for Cd2+. The removal capacity increased in the order of MgAl-CO3 (127.3 mg/g) < MgAl-SO4 (173.3 mg/g) < MgAl-NO3 (305.0 mg/g) ≈ MgAl-Cl (312.5 mg/g). The quasi-in-situ XRD and XAS demonstrated that Cd2+ was removed in the form of CdCO3 for MgAl-CO3, while for MgAl-Cl/NO3/SO4, Cd2+ was all removed in the form of CdAl-LDHs with isomorphic substitution mechanism. DFT calculations revealed that the lower Gibbs free energy in the formation of CdCO3 than CdAl-LDHs made it easier to remove Cd2+ by CdCO3 on MgAl-CO3. Conversely, isomorphic substitution of MgAl-NO3 to CdAl-LDHs was a free energy reduction process.

Passivating Oxygen Evolution Activity of NiFe-LDH through Heterostructure Engineering to Realize High-Efficiency Electrocatalytic Formate and Hydrogen Co-Production

An electrocatalytic methanol oxidation reaction (MOR) is proposed to replace oxygen evolution reaction (OER) in water electrolysis owing to the favorable thermodynamics of MOR than OER. However, there is still a competition between the MOR and the OER when the applied potential is in the conventional OER zone. How to inhibit OER while maintaining efficient MOR is an open and challenging question, and there are few reports focusing on this thus far. Herein, by taking NiFe layered double hydroxide (LDH) as a model catalyst due to its intrinsically high catalytic activity for the OER, the perspective of inhibiting OER is shown and thus promoting MOR through a heterogenous engineering of NiFe-LDH. The engineered heterostructure comprising NiFe-LDH and in situ formed NiFe-hexylaminobenzene (NiFe-HAB) coordination polymer exhibits outstanding electrocatalytic capability for methanol oxidation to formic acid (e.g., the Faradaic efficiencies (FEs) of formate product are close to 100% at various current densities, all of which are much larger than those (53-65%) on unmodified NiFe-LDH). Mechanism studies unlock the modification of NiFe-HAB passivates the OER activity of NiFe-LDH through tailoring the free energies for element reaction steps of the OER and increasing the free energy of the rate-determining step, consequently leading to efficient MOR.

Chelation Behaviors of 3,4,3-LI(1,2-HOPO) with Lanthanides and Actinides Implicated by Molecular Dynamics Simulations

The hydroxypyridinone ligand 3,4,3-LI(1,2-HOPO) (denoted as t-HOPO) is a potential chelator agent for decorporation of in vivo actinides (An), while its coordination modes with actinides and the dynamics of the complexes (An(t-HOPO)) in aqueous phase remain unclear. Here, we report molecular dynamics simulations of the complexes with key actinides (Am³⁺, Cm³⁺, Th⁴⁺, U⁴⁺, Np⁴⁺, Pu⁴⁺) to study their coordination and dynamic behaviors. For comparison, the complexation of the ligand with a ferric ion and key lanthanides (Sm³⁺, Eu³⁺, Gd³⁺) was also studied. The simulations show that the nature of metal ions determines the properties of the complexes. The t-HOPO in the Fe^III(t-HOPO)^1- complex ion formed a compact and rigid cage to encapsulate the ferric ion, which was hexa-coordinated. Ln³⁺/An³⁺ cations were ennea-coordinated with eight ligating oxygen atoms from t-HOPO and one from an aqua ligand, and An⁴⁺ cations were deca-coordinated with a second aqua ligand. The t-HOPO shows strong affinity for metal ions (stronger for An⁴⁺ than Ln³⁺/An³⁺) benefited from its high denticity and its flexible backbone. Meanwhile, the complexes displayed different dynamic flexibilities, with the An^IV(t-HOPO) complexes more significant than the others, and in the An^IV(t-HOPO) complexes, the fluctuation of the t-HOPO ligand was highly correlated with that of the eight ligating O atoms. This is attributed to the more compact conformation of the ligand, which raises backbone tension, and the competition of the aqua ligand against the t-HOPO ligand in coordinating with the tetravalent actinides. This work enriches our understanding on the structures and conformational dynamics of the complexes of actinides with t-HOPO and is expected to benefit the design of HOPO analogues for actinide sequestering.

Regulating Hollow Carbon Cage Supported NiCo Alloy Nanoparticles for Efficient Electrocatalytic Hydrogen Evolution Reaction

The NiCo alloy is one of the most promising alternatives to the noble-metal electrocatalysts for the hydrogen evolution reaction (HER); however, its performance is largely restricted by insufficient active sites and low surface area. Here, we fabricated a hierarchical hollow carbon cage supported NiCo alloy (denoted as HC NiCo/C) and a bulk NiCo alloy (denoted as NiCo) by reduction of a partially ZIF-67 etched ZIF-67@NiCo-LDH (LDH = layered double hydroxide) precursor and a fully ZIF-67 etched NiCo-LDH precursor, respectively. The as-prepared HC NiCo/C, in which the Ni₂₉Co₇₁ alloy nanocrystals with an average 6 nm size were encapsulated in graphitic carbon layers, provided a vastly increased electrochemically active surface area (ca. 13 times than the NiCo) and abundant catalytic active sites, which resulted in a higher HER performance with an overpotential of 99 mV than the 198 mV for NiCo at 10 mA cm^-2. Detailed experimental results suggested that only the HC NiCo/C possessed the active alloy surface composed of unsaturated Ni⁰ and Co⁰ atoms, and both the metal-support interaction and alloying effect influenced the electronic structure of Co and Ni in HC NiCo/C, whereas the NiCo exhibited pure Ni surface. Theoretical calculations further revealed the Ni₂₉Co₇₁ alloy surface in HC NiCo/C possessed the appropriate adsorption energy of the intermediate state (adsorbed H*). This work provided new insight into the construction of the stable small-sized bimetallic alloy nanocatalysts by regulating the reduction precursors.

Dual Engineering of Lattice Strain and Valence State of NiAl-LDHs for Photoreduction of CO2 to Highly Selective CH4

Converting CO₂ to clean-burning fuel such as natural gas (CH₄ ) with high activity and selectivity remains to be a grand challenge due to slow kinetics of multiple electron transfer processes and competitive hydrogen evolution reaction (HER). Herein, the fabrication of surfactants (C₁₁ H₂₃ COONa, C₁₂ H₂₅ SO₄ Na, C₁₆ H₃₃ SO₄ Na) intercalated NiAl-layered double hydroxides (NiAl-LDH) is reported, resulting in the formation of LDH-S1 (S1 = C₁₁ H₂₃ COO^- ), LDH-S2 (S2 = C₁₂ H₂₅ SO₄ ^- ) and LDH-S3 (S3 = C₁₆ H₃₃ SO₄ ^- ) with curved morphology. Compared with NiAl-LDH with a 1.53% selectivity of CH₄ , LDH-S2 shows higher selectivity of CH₄ (83.07%) and lower activity of HER (3.84%) in CO₂ photoreduction reaction (CO₂ PR). Detailed characterizations and DFT calculation indicates that the inherent lattice strain in LDH-S2 leads to the structural distortion with the presence of V_Ni/Al defects and compressed MOM bonds, and thereby reduces the overall energy barrier of CO₂ to CH₄ . Moreover, the lower oxidation states of Ni in LDH-S2 enhances the adsorption of intermediates such as OCOH* and *CO, promoting the hydrogenation of CO to CH₄ . Therefore, the coupling effect of both lattice strain and electronic structure of the LDH-S2 significantly improves the activity and selectivity for CO₂ PR.

Initial stage of carbonization of iron during hydrocarbons dissociation: a molecular dynamics study

The carbonization of iron is a very important early phenomenon in the field of heterogeneous catalysis and the petrochemical industry, but the mechanism is still controversial. In this work, the carbonization mechanism and carbonization structure of iron nanoparticles by different carbon sources (CH₄, C₂H₆, C₂H₄, C₂H₂) were systematically investigated using the reactive molecular dynamics method. The results show that saturated alkanes are dehydrogenated while adsorbed, but unsaturated olefins and alkynes undergo bond-breaking while adsorbed. The C-H bond is more likely to break than the C-C bond. Hydrocarbons with high carbon content have a strong ability to carbonize Fe nanoparticles under the same conditions. For C₂H₄ and C₂H₂, the C atoms generated from dissociation form a large number of long carbon chains intertwined with branched chains and multiple carbon rings. The C2 species formed by C₂H₂ after complete dehydrogenation diffuse rapidly to the interior of the nanoparticles, releasing the surface active sites and accelerating the carbonization process. Carbon-rich iron carbides (FeC_x) with different Fe/C ratios were obtained by carbonization with different carbon sources. In addition, the Fe(110) surface exhibits the strongest carburizing ability. These findings provide systematic insights into the initial stages of metal Fe carburization.

Fabrication of Epitaxially Grown Mg2Al-LDH-Modified Nanofiber Membranes for Efficient and Sustainable Separation of Water-in-Oil Emulsion

Efficient separation of water-in-oil emulsion is of great importance but remains highly challenging since such emulsion contains stable tiny droplets with a diameter less than 20 μm. Herein, we reported the fabrication of a modular fibrous functional membrane using an "in situ growth and covalent functionalization" strategy. The as-prepared PAN@LDH@OTS (PAN = polyacrylonitrile; LDH = layered double hydroxides; and OTS = octadecyltrichlorosilane) membrane possessed an interlaced rough nanostructured surface with intriguing superhydrophobic/superlipophilic properties. When applied for the separation of surfactant-stabilized water-in-oil emulsion (SSE), the PAN@LDH@OTS membrane exhibited an ultrahigh permeation flux of up to 4.63 × 10⁴ L m^-2 h^-1 with an outstanding separation efficiency of >99.92%, outperforming most of the state-of-the-art membranes. In addition, the membrane can maintain a stable permeation flux and superhydrophobic/superlipophilic properties after 20 times of use. Detailed characterization demonstrated that the demulsification of the SSE process was as follows: first, the droplets can be easily adsorbed to the PAN@LDH@OTS membrane due to the improved intermolecular interactions between OTS and the surfactants (Span 80); second, the droplets can be deformed by the electropositive LDH laminate; and third, the deformed tiny emulsion droplets coalesced into large droplets and floated up, and as a result, efficient separation of SSE can be achieved.

First Ultrathin Pure Polyoxometalate 2D Material as a Peroxidase-Mimicking Catalyst for Detecting Oxidative Stress Biomarkers

Although two-dimensional (2D) materials with ultrathin geometry and extraordinary electrical attributes have attracted substantial concern, exploiting new-type 2D materials is still a great challenge. In this work, an unprecedented single-layer pure polyoxometalate (POM) 2D material (2D-1) was prepared by ultrasonically exfoliating a one-dimensional (1D)-chain heterometallic crystalline germanotungstate Na₄[Ho(H₂O)₆]₂[Fe₄(H₂O)₂(pic)₆Ge₂W₂₀O₇₂]·16H₂O (1) (Hpic = picolinic acid). The 1D polymeric chain of 1 is assembled from particular {Ge₂W₂₀}-based [Fe₄(H₂O)₂(pic)₆Ge₂W₂₀O₇₂]^10- segments through bridging [Ho(H₂O)₆]³⁺ cations. 2D-1 is formed by π-π interaction driving force among adjacent 1D polymeric chains of 1. Also, the peroxidase-mimicking properties of 2D-1 toward detecting H₂O₂ were evaluated and good detection result was observed with a limit of detection (LOD) of 58 nM. Density functional theory (DFT) calculation further confirms that 2D-1 displays outstanding catalytic activity and active sites are located on Fe centers and Hpic ligands. Under the catalysis of uricase, uric acid can be transformed to allantoin and H₂O₂, and then, H₂O₂ oxidizes TMB to its blue ox-TMB in the presence of 2D-1 as a catalyst. Then, we utilized this cascade reaction to detect uric acid, which also exhibits prominent results. This research opens a door to prepare ultrathin pure POM 2D materials and broadens the scope of potential applications of POMs in biology and iatrology.

Engineering of PMo12@NiCo-LDH composite via in-situ encapsulation-reassembly strategy for highly selective photocatalytic reduction of CO2 to CH4

Polyoxometalates intercalated layered double hydroxides (POMs-LDHs) composites have drawn wide attention due to their tunable intrinsic properties, variable composition and synergistic effects between the LDHs and POMs. Herein, we reported...

Latest Progress of Asymmetrically Functionalized Anderson-type Polyoxometalates

The Anderson-type polyoxometalates (POMs) are one of the most important and widely developed groups of the POMs family. The covalent functionalization of Anderson POMs have attracted extensive attention and facilitated...

Asymmetric Modification of Anderson-type Polyoxometalates Towards Organic-inorganic Homo-and Hetero-Cluster Oligomers

The preparation of asymmetrically modified polyoxometalates (POMs) bearing two different functional sites is of great interest, since it allows for rational design and controlled synthesis of novel POM-based hybrids and...

Electronic structure regulation of halogen anions intercalated MgAl-LDH for highly selective photo-thermal oxidation of CH4

The selective oxidation of methane (CH4) into high value-added chemicals such as CO is one of the important challenges in C1 chemical industry owing to the high bond energy of...

[Trust in vaccination and its influencing factors among parents of children aged 0-6 years]

Objective: To analyze the trust in vaccination and its influencing factors in parents of children aged 0-6 years. Methods: In June 2021, a cross-sectional survey was conducted to collect the basic information of parents of children aged 0-6 years, including their trust in vaccination and their attitudes towards vaccination. The χ² test was used to compare the difference between different groups, and logistic regression was used to analyze the influencing factors. Results: A total of 10 916 parents of children aged 0-6 years were investigated in this study, and their trust in vaccine was 67.20%, of which safety (55.80%) was the key factor limiting the trust in vaccination. 37.94% (4 142/10 916) of the parents were willing to vaccinate more than two kinds of vaccines at the same time, and 85.07% (9 286/10 916) of the parents feared that abnormal reactions would occur after vaccination. The parents' age, education level and annual family income were the promoting factors of their trust in vaccination (P<0.05). Obtaining vaccine knowledge through vaccination APP or official account (OR=1.330, 95%CI: 1.188-1.489) and popular science leaflets distributed by vaccination clinics (OR=1.120, 95%CI: 1.020-1.228) were the promoting factors of parents' trust in vaccination. Young children and parents, high family income and education level were the promoting factors for parents to be willing to vaccinate at the same time (P<0.05), and young children and parents, low family income and education level were the inducing factors for fear of abnormal reaction after vaccination (P<0.05). Parents of children in the central region had a high acceptance of simultaneous vaccination for children, while parents of children in the western region had a low degree of concern about abnormal reactions after vaccination (P<0.05). Parents of children who read books and got vaccine knowledge online (OR=1.257, 95%CI: 1.153-1.371), urban residents (OR=1.173, 95%CI: 1.062-1.295) and with jobs (OR=1.109, 95%CI: 1.015-1.212) were more willing to vaccinate at the same time. The choice of imported vaccine was a promoting factor for parents to worry about abnormal reactions after vaccination (P<0.05). Conclusion: There is room for parents of children aged 0-6 years to further improve their trust in vaccination. At this stage, it is necessary to innovate the way of health education and health promotion, and pay attention to the publicity of vaccine safety knowledge, so as to improve parents' trust in vaccination.

[Analysis for dropout of DTaP routine immunization in China in 2019]

Objective: To analyze the dropout of adsorbed diphtheria, tetanus and acellular pertussis combined vaccine (DTaP) routine immunization in China in 2019. Methods: DTaP vaccination data in all counties in China were collected through National Immunization Program Information Management System in 2019. Cumulative dropout rate and vaccination rate of DTaP in different provinces were calculated. According to the P₂₅, P₅₀ and P₇₅ values of DTaP dropout rate for all counties by province, counties in each province were divided into four groups (Q₁-Q₄). The DTaP average dropout rate of four groups and absolute difference (difference in DTaP average dropout rate between Q₄ and Q₁) were calculated. Spearman rank correlation was used to analyze the relationship between absolute difference and provincial DTaP dropout rate, DTaP₁ and DTaP₃ vaccination rate. Results: DTaP₁ vaccination rate ranged from 92.98% to 99.94% by province, with a median of 99.55%. Provincial DTaP dropout rate ranged from 0.36% to 28.66%, with a median of 3.54%. The provincial DTaP dropout rate was more than 10% in Gansu and Guizhou, about 28.66% and 17.19%. Absolute difference ranged from 4.02% to 39.22%, with a median of 10.16%. Provinces with the largest absolute difference were Gansu, Qinghai, Liaoning and Guizhou, about 39.22%, 34.48%, 23.31% and 21.33%, respectively. Correlation analysis indicated that the absolute difference was positively correlated with provincial DTaP dropout rate, with a correlation coefficient of 0.492 (P=0.004). It was negatively correlated with DTaP₁ and DTaP₃ vaccination rate. Correlation coefficients were -0.542 (P=0.001) and -0.562 (P=0.001), respectively. Conclusions: There are significant county-level differences in DTap dropout rate in most provinces, with relatively high difference in western provinces.

Europium (III) complex-based fluorescent probe for instantaneous, selective, and sensitive detection of phosgene

Phosgene (carbonyl chloride, COCl₂) is a widely used colorless gas in organic synthesis. However, its high toxicity sets a severe potential damage of public safety. As the fluorescence method has the advantages of simple operation and real-time detection of phosgene, it is extremely important to develop a fluorescent phosgene probe for public health and safety. This study aimed to present a simple Eu³⁺ complex (1) with 2-hydroxyl-1H-benzimidazole moiety as a novel phosgene probe. Probe 1 exhibited characteristic emission of Eu³⁺ in CH₃CN solution, which was specifically quenched after encountering phosgene. The change in the solution color from light red to dark could be easily distinguished with the naked eye under a 365 nm ultraviolet lamp. Finally, the test paper with probe 1 was fabricated for effortless, selective, and visual detection of phosgene gas.

A simple colorimetric and fluorometric probe for rapid detection of CN- with large emission shift

In this work, a novel probe R was synthesized via Knoevenagel reaction between 3H-benzo[f]chromium-2-formaldehyde and ethyl cyanoacetate for selective detection of CN^- in both colorimetric and fluorescent signal channels. The recognition of CN^- was through the nucleophilic reaction of CN^- to C = C of probe R, which destroys π-conjugation and blocks the ICT effect of the probe, resulting in colorimetric and fluorometric responses. Probe R showed great sensitivity toward CN^-, with large fluorescent emission (595 nm) and low detection limit (0.70 μM). Moreover, probe R can detect exogenous CN^- in living cells.

Triple-Phase Interface Engineering over an In2O3 Electrode to Boost Carbon Dioxide Electroreduction

The electrocatalytic reduction of CO₂ is deemed to be a promising method to ease environmental and energy issues. However, achieving high efficiency and selectivity of CO₂ electroreduction remains a bottleneck due to huge limitation of CO₂ mass transfer and competition of hydrogen evolution reaction (HER) in aqueous solution. In this work, we propose to utilize triple-phase interface engineering over an In₂O₃ electrode to enhance its CO₂ reduction reaction (CO₂RR) performance. Notably, distinguishing from other research studies (doping, defect introduction, and heterojunction construction) that regulate the nature of In₂O₃-based catalysts themselves, we herein tune interfacial wettability of In₂O₃ using facile fluoropolymer coating for the first time. In contrast to the hydrophilic In₂O₃ electrode [Faraday efficiency (FE)_HCOOH ∼ 62.7% and FE_H2 ∼ 24.1% at -0.67 V versus RHE], the hydrophobic fluoropolymer (taking polyvinylidene fluoride as an example)-coated In₂O₃ electrode delivers a significantly enhanced FE_HCOOH of 82.3% and a decreased FE_H2 of 5.7% at the same potential. Upon combining contact angle measurements, density functional theory calculation, and ab initio molecular dynamics simulation, the enhanced CO₂RR performance is revealed to be attributed to the rich triple-phase interfaces formed after fluoropolymer coating as an "aerophilic sponge", which increases the local concentration of CO₂ near In₂O₃ active sites to improve CO₂ reduction and meanwhile reduces the accessible water molecules to suppress competitive HER. This work presents a feasible approach for the enhanced selectivity of HCOOH yield over In₂O₃ by triple-phase interface engineering, which also provides a convenient and effective method for developing other materials used in gas-consumption reactions.

VO4 -Modified Layered Double Hydroxides Nanosheets for Highly Selective Photocatalytic CO2 Reduction to C1 Products

The conversion of CO₂ into high-value added chemicals driven by solar energy is an effective way to solve environmental problems, which is, however, largely restricted by the competition reaction of the hydrogen evolution reaction (HER) and easy electron-hole recombination, etc. Herein, VO₄ -supported ultrathin NiMgV-layered double hydroxide (V/NiMgV-LDH) nanosheets are successfully fabricated, and the extended X-ray absorption fine structure (EXAFS) and density function theory (DFT) calculations reveal that VO₄ species are located on the top of V atoms in the NiMgV-LDH laminate. The V/NiMgV-LDH is proved to be highly efficient for the photocatalytic CO₂ reduction reaction (CO₂ PR) with high selectivity of 99% for C1 products and nearly no HER (<1%) takes place under visible light. Contrast experiments using NiMgV-LDH as the catalyst for CO₂ PR show a CO selectivity of 71.40% and a H₂ selectivity of 28.11%. Such excellent performance of V/NiMgV-LDH can be attributed to the following reasons: 1) the V/NiMgV-LDH modulates the band structure and promotes the separation of electrons and holes; 2) strong bonding between V/NiMgV-LDH and CO* and H* facilitates the hydrogenation to form CH₄ and inhibits the formation of by-product H₂ at the same time.

[Expert recommendations on human papillomavirus vaccine immunization strategies in China]

HPV vaccination is the most effective way for preventing the cervical cancer. To respond the WHO calling for cervical cancer elimination, some Chinese provincial governments are launching the Free HPV Vaccination Programs for teenagers. Basing on the current stage of domestic utilization and the global immunization strategies of HPV vaccination, this paper provides a comprehensive review of the key aspects in the process of HPV vaccination, including subjects and priority vaccination population, vaccination dose and time interval, the principal of vaccination replacement, and the vaccination suggestion on special populations, etc. The article above contents and gives the advice on the immunization strategy of HPV vaccination in China.

Rational Regulation of Electronic Structure in Layered Double Hydroxide Via Vanadium Incorporation to Trigger Highly Selective CO2 Photoreduction to CH4

To realize excellent selectivity of CH₄ in CO₂ photoreduction (CO₂ PR) is highly desirable, yet which is challenging due to the limited active sites for CH₄ generation and severe electron-hole recombination on photocatalysts. Herein, based on the theoretically calculated effects of vanadium incorporation into the laminate of layered double hydroxides (LDHs), V into NiAl-LDH to synthesize a series of LDHs with various V contents is introduced. NiV-LDH is revealed to afford a high CH₄ selectivity (78.9%), and extremely low H₂ selectivity (only 0.4%) under λ > 400 nm irradiation. By further tuning the molar ratio of Ni to V, a CH₄ selectivity of as high as 90.1% is achieved on Ni₄ V-LDH, and H₂ is completely prohibited on Ni₂ V-LDH. Fine structural characterizations and comprehensive optical and electrochemical studies uncover V incorporation creates the lower-valence Ni species as active sites for generating CH₄ , and enhances the generation, separation, and transfer of photogenerated carriers.

Insights into the Superstable Mineralization of Chromium(III) from Wastewater by CuO

The removal of Cr^III ions from contaminated wastewater is of great urgency from both environmental protection and resource utilization perspectives. Herein, we developed a superstable mineralization method to immobilize Cr³⁺ ions from wastewater using CuO as a stabilizer, leading to the formation of a CuCr layered double hydroxide (denoted as CuCr-LDH). CuO showed a superior Cr³⁺ removal performance with a removal efficiency of 97.97% and a maximum adsorption capacity of 207.6 mg/g in a 13000 mg/L Cr³⁺ ion solution. In situ and ex situ X-ray absorption fine structure characterizations were carried out to elucidate the superstable mineralization mechanism. Two reaction pathways were proposed including coprecipitation-dissolution and topological transformation. The mineralized product of CuCr-LDH can be reused for the efficient removal of organic dyes, and the adsorption capacities were up to 248.0 mg/g for Congo red and 240.1 mg/g for Evans blue, respectively. Moreover, CuCr-LDH exhibited a good performance for photocatalytic CO₂ reduction to syngas (H₂/CO = 2.66) with evolution rates of 54.03 μmol/g·h for CO and of 143.94 μmol/g·h for H₂ under λ > 400 nm, respectively. More encouragingly, the actual tanning leather Cr³⁺ wastewater treated by CuO showed that Cr³⁺ can reduce from 3438 to 0.06 mg/L, which was much below discharge standards (1.5 mg/L). This work provides a new approach to the mineralization of Cr³⁺ ions through the "salt-oxide" route, and the findings reported herein may guide the future design of highly efficient mineralization agents for heavy metals.

Mechanistic insights of molecular metal polyselenides for catalytic hydrogen generation

Molecular metal chalcogenides have attracted great attention as electrocatalysts for the hydrogen evolution reaction (HER). However, efficient utilisation of the active sites and catalytic performance modulation has been challenging. Here we explore the design of immobilized molecular molybdenum polyselenides [Mo₂O₂S₂(Se₂)(Se_x)]^2- that exhibit efficient hydrogen evolution at low overpotential and stability over 1000 cycles. Density functional calculations provide evidence of a unimolecular mechanism in the HER process via the exploration of viable reaction pathways. The discussed findings are of a broad interest in the development of efficient molecular electrocatalytic materials.