Simple π-Conjugated Polymers Based on Bithiazole for Nonfullerene Organic Photovoltaics

Thiazole, as a family of five-membered heteroaromatic rings, is an interesting building unit that can play a role in coplanarizing the backbone as well as deepening the HOMO energy level, which is beneficial for the design of π-conjugated polymers for the photoactive materials in organic photovoltaics (OPVs). Here, we designed and synthesized π-conjugated polymers with simple chemical structures, which consist of 2,2'-bithiazole or 5,5'-bithiazole and alkylthiophenes as the polymer backbone. In fact, the polymers can be easily synthesized in much fewer steps compared to the typical high-performance polymers based on fused heteroaromatic rings. Interestingly, PTN5 exhibited a markedly higher ordered structure than PTN2. This was likely ascribed to the more coplanar and rigid backbone of PTN5 than that of PTN2 originating in the effectively arranged S···N interaction. As a result, the nonfullerene photovoltaic cell based on PTN5 showed a PCE of 12.2%, which was much higher than the cell based on PTN2 (4.3%) and was high for the polymers consisting of only nonfused rings. These results demonstrate that thiazole-based polymers are promising photoactive materials for OPVs and emphasize the importance of careful molecular design utilizing noncovalent interactions.

Circular depolarization spectroscopy: A new tool to study photo-imprinting of chirality

When irradiating a molecular material containing photo-isomerizable groups with pure circularly polarized light, a particular handedness may get imprinted into the material. To study the mechanism and kinetics of this process in situ and operando, we have developed a new chiroptical tool where the circular polarization of the incident circularly polarized light is monitored after transmission through the photoactive layer. Practical limits to the resolution and sensitivity of the measurements as well as its calibration are discussed. To aid interpretation of experimental results, we present kinetic Monte Carlo simulations on a model for the active material involving photo-induced reorientation of molecules in a cholesteric organization. The simulations support the interpretation of a transient minimum in the degree of circular polarization of the transmitted light in terms of a nematic transient state during photo-inversion of a cholesteric organization in the molecular material.

Charge-Compensated N-Doped π-Conjugated Polymers: Toward both Thermodynamic Stability of N-Doped States in Water and High Electron Conductivity

The understanding and applications of electron-conducting π-conjugated polymers with naphtalene diimide (NDI) blocks show remarkable progress in recent years. Such polymers demonstrate a facilitated n-doping due to the strong electron deficiency of the main polymer chain and the presence of the positively charged side groups stabilizing a negative charge of the n-doped backbone. Here, the n-type conducting NDI polymer with enhanced stability of its n-doped states for prospective "in-water" applications is developed. A combined experimental-theoretical approach is used to identify critical features and parameters that control the doping and electron transport process. The facilitated polymer reduction ability and the thermodynamic stability in water are confirmed by electrochemical measurements and doping studies. This material also demonstrates a high conductivity of 10^-2  S cm^-1  under ambient conditions and 10^-1  S cm^-1  in vacuum. The modeling explains the stabilizing effects  for various dopants. The simulations show a significant doping-induced "collapse" of the positively charged side chains on the core bearing a partial negative charge. This explains a decrease in the lamellar spacing observed in experiments. This study fundamentally enables a novel pathway for achieving both thermodynamic stability of the n-doped states in water and the high electron conductivity of polymers.

Wide Bandgap Polymer Donor with Acrylate Side Chains for Non-Fullerene Acceptor-based Organic Solar Cells

Organic semiconductors inherently have a low dielectric constant and hence high exciton binding energy, which is largely responsible for the rather low power conversion efficiency of organic solar cells as well as the requirements to achieve delicate bulk-heterojunction nanophase separation in the active layer. In this study, we use methyl acrylate as a weakly electron-withdrawing side chain for the electron rich thiophene to prepare a new building block, methyl thiophene-3-acrylate (TA), with increased polarity. A wide bandgap polymer PBDT-TA synthesized using TA and a benzodithiophene (BDT) monomer shows increased dielectric constant and reduced exciton binding energy compared to the analogous polymer PBDT-TC, which is made of BDT and methyl thiophene-3-carboxylate (TC). An organic solar cell device based on PBDT-TA:ITIC also achieves a higher power conversion efficiency of 10.47% than that of the PBDT-TC:ITIC based solar cell (9.68%). This work demonstrates the effectiveness of using acrylate side chains to increase the dielectric constant, reduce the exciton binding energy, and enhance the solar cell efficiency of polymer semiconductors. This article is protected by copyright. All rights reserved.

Programmable Assembly of π-Conjugated Polymers

π-Conjugated polymers have numerous applications due to their advantageous optoelectronic and mechanical properties. These properties depend intrinsically on polymer ordering, including crystallinity, orientation, morphology, domain size, and π-π interactions. Programming, or deliberately controlling the composition and ordering of π-conjugated polymers by well-defined inputs, is a key facet in the development of organic electronics. Here, π-conjugated programming is described at each stage of material development, stressing the links between each programming mode. Covalent programming is performed during polymer synthesis such that complex architectures can be constructed, which direct polymer assembly by governing polymer orientation, π-π interactions, and morphological length-scales. Solution programming is performed in a solvated state as polymers dissolve, aggregate, crystallize, or react in solution. Solid-state programming occurs in the solid state and is governed by polymer crystallization, domain segregation, or gelation. Recent progress in programming across these stages is examined, highlighting order-dependent features and assembly techniques that are unique to π-conjugated polymers. This should serve as a guide for delineating the many ways of directing π-conjugated polymer assembly to control ordering, structure, and function, enabling the further development of organic electronics.

Atomic Scale Control and Visualization of Topological Quantum Phase Transition in π-Conjugated Polymers Driven by Their Length

Quantum phase transitions (QPTs) driven by quantum fluctuations are transitions between distinct quantum phases of matter. At present, they are poorly understood and not readily controlled. Here, scanning tunneling microscopy (STM) and noncontact atomic force microscopy (nc-AFM) are used to explore atomic scale control over quantum phase transitions between two different topological quantum states of a well-defined π-conjugated polymer. The phase transition is driven by a pseudo Jahn-Teller effect that is activated above a certain polymer chain length. In addition, theoretical calculations indicate the presence of long-lasting coherent fluctuations between the polymer's two quantum phases near the phase transition, at finite temperature. This work thus presents a new way of exploring atomic-scale control over QPTs and indicates that emerging quantum criticality in the vicinity of a QPT can give rise to new states of organic matter.

A review of π-conjugated polymer-based nanocomposites for metal-ion batteries and supercapacitors

Owing to their extraordinary properties of π-conjugated polymers (π-CPs), such as light weight, structural versatility, ease of synthesis and environmentally friendly nature, they have attracted considerable attention as electrode material for metal-ion batteries (MIBs) and supercapacitors (SCPs). Recently, researchers have focused on developing nanostructured π-CPs and their composites with metal oxides and carbon-based materials to enhance the energy density and capacitive performance of MIBs and SCPs. Also, the researchers recently demonstrated various novel strategies to combine high electrical conductivity and high redox activity of different π-CPs. To reflect this fact, the present review investigates the current advancements in the synthesis of nanostructured π-CPs and their composites. Further, this review explores the recent development in different methods for the fabrication and design of π-CPs electrodes for MIBs and SCPs. In review, finally, the future prospects and challenges of π-CPs as an electrode materials for strategies for MIBs and SCPs are also presented.

Metal-Ligand Coordination Induced Ionochromism for π-Conjugated Materials

Recent studies indicated that the toxicity of heavy metal ions caused a series of environmental, food, and human health problems. Chemical ionochromic sensors are crucial for detecting these toxicity ions. Incorporating organic ligands into π-conjugated polymers made them receptors for metal ions, resulting in an ionochromism phenomenon, which is promising to develop chemosensors for metal ions. This review highlights the recent advances in π-conjugated polymers with ionochromism to metal ions, which may guide rational structural design and evaluation of chemosensors.

Photoluminescent Response of Poly(3-methylthiophene)-DNA Single Nanowire Correlating to Nucleotide-Mismatch Locus in DNA-DNA Hybridization

π-Conjugated polymers have become qualified candidates for biosensing owing to their unique optoelectronic properties and excellent biocompatibility. In this contribution, nucleotide mismatches in DNA hybridization, being variable in position, are reflected in a stark manner by poly(3-methylthiophene) (P3MT) nanowires (NWs), in which probe DNA sequence is properly functionalized. Selected as the systematic investigation are complementary target DNA (tDNA), random sequence DNA, and three kinds of 1-mer mismatched tDNAs with different mismatch loci away from the NW's surface. Nanoscale optical observation of the single P3MT NWs in solid states reveals that the more distant the mismatch position is from the surface, the higher the photoluminescence (PL) occurs, while the complementary sequence yields the highest but the random one remains the lowest. Hence, the PL intensity increases with the relative length of the DNA-DNA hybridization from the surface. These results deliver a new basis that π-conjugated polymers can be potentially applicable to detailed nucleotide analyses as in single nucleotide polymorphism.

Direct Synthesis of Chain-end-functionalized Poly(3-hexylthiophene) without Protecting Groups Using a Zincate Complex

Chain-end-functionalized poly(3-hexylthiophene)s (P3HTs) with benzyl alcohol (─PhCH₂ OH), phenol (─PhOH), and benzoic acid (─PhCOOH) groups are directly synthesized based on the Negishi catalyst-transfer polycondensation method utilizing the zincate complex of ^t Bu₄ ZnLi₂ . In this system, neither protection nor deprotection steps are required, and also providing a living polymerization system to control the molecular weight while maintaining a low molar mass dispersity (Ð_M ) of the obtained P3HT derivatives. Indeed, the chain-end-functionalized P3HTs can be synthesized along with controlled number-average molecular weights (M_n = 5100-20 000), low Ð_M (1.06-1.14), and high chain-end functionality (Fn = 46-86%). The Fn values for the alcohol and phenol groups are found to be high (86% for ─PhCH₂ OH and 71% for ─PhOH based on ¹ H NMR, respectively), as also confirmed by matrix-assisted laser desorption/ionization time of flight mass spectroscopy. The easily synthesizable chain-end-functionalized P3HTs will be applicable for the facile synthesis of block and branched polymers containing P3HT as well as its related semiconducting polymer segments.

Te-Li Exchange Reaction of Tellurophene-Containing π-Conjugated Polymer as Potential Synthetic Tool for Functional π-Conjugated Polymers

On the basis of the facts that tellurophene-containing π-conjugated polymers are obtainable from organotitanium polymers and that the tellurium atoms in the tellurophene derivatives can be transformed into lithium atoms, the synthesis of reactive lithiated polymer precursor and its transformations into some functionalized π-conjugated polymers are described. A regioregular organometallic polymer having 1,4-dilithio-1,3-butadiene and 9,9-dioctylfluorene-2,7-diyl units is generated by the reaction of a tellurophene-containing polymer having the number-average molecular weight (M_n ) and molecular weight distribution (M_w /M_n ) of 5890 and 1.9, respectively, with n-butyllithium (2.4 equiv.) at -78 °C to -60 °C for 3 h. The lithiated polymer thus prepared is subjected to reactions with electrophiles to produce functionalized π-conjugated polymers. For example, a π-conjugated polymer possessing 1,4-bis(tri-n-butylstannyl)-1,3-butadiene-1,4-diyl unit is obtained in 67% yield by the reaction with tri-n-butyltin chloride (2.4 equiv.) at -60 °C to ambient temperature for 12 h in tetrahydrofuran, whose M_n and M_w /M_n are estimated as 7320 and 2.5, respectively, by size exclusion chromatography. The absorption maximum and onset of the obtained polymer are observed at 380 and 465 nm, respectively, in the UV-vis spectrum, from which the optical band gap of the polymer is estimated as 2.67 eV.

Synthesis of Stannole-Containing π-Conjugated Polymers by Post-Element Transformation of Organotitanium Polymer

The synthesis of stannole-2,5-diyl-containing π-conjugated polymers by the post-element transformation of a regioregular organotitanium polymer is described. For example, a 1,1-diphenylstannole-containing polymer is obtained in 83% yield by the reaction of a regioregular organotitanium polymer, which is prepared from 1,4-bis(2-ethylhexyloxy)-2,5-diethynylbenzene and a low-valent titanium complex with diphenyltin dichloride at -50 °C to ambient temperature. The number-average molecular weight and molecular weight distribution (M_n and M_w /M_n ) of the stannole-containing polymer are estimated as 4800 and 1.8, respectively. The obtained polymer is found to have the extended π-conjugated backbone and relatively low-lying lowest unoccupied molecular orbital (LUMO) energy level (-3.12 eV), which is supported by its UV-vis absorption spectrum and cyclic voltammetric (CV) analysis. In addition, the stannole-containing polymer is found to be applicable to a chemosensor for fluoride anion where the color and photoluminescence intensity of the polymer solution exhibits a distinct change in the presence of a fluoride anion.

Rhodium-Catalyzed Stitching Polymerization of 1,5-Hexadiynes and Related Oligoalkynes

A new mode of polymerization, rhodium-catalyzed stitching polymerization, has been developed for the synthesis of π-conjugated polymers with bridged repeating units from nonconjugated 1,5-hexadiynes containing both terminal and internal alkyne moieties as monomers. The polymerization proceeded smoothly with a high degree of stitching efficiency under mild conditions, and 1,5,9-decatriyne and 1,5,9,13-tetradecatetrayne monomers could also be employed. The present polymerization strategy would be particularly beneficial for the synthesis of polymers consisting of a repeating unit that is difficult to prepare as a stable monomer because it does not require the use of a preformed bridged π-conjugated monomer.

Correlation between Distribution of Polymer Orientation and Cell Structure in Organic Photovoltaics

The backbone orientation of semiconducting polymers is one of the important structural factors that determines the charge transport and thus the performance of optoelectronic devices. Here, we study two sets of thiophene-thiazolothiazole polymers, which primarily form edge-on and face-on orientations, termed "edge-on-polymers" and "face-on-polymers", respectively; both orientation types co-exist in their polymer/fullerene blend films. Interestingly, we find that the dependence of the photoactive layer thickness on the fill factor in the photovoltaic cells, with the inverted and conventional structures, is quite distinct in the edge-on-polymer; however, this is not evident in the face-on-polymers. An in-depth study by grazing incidence X-ray diffraction analysis reveals that the face-on/edge-on ratio is unevenly distributed through the film thickness in the edge-on-polymers, while it is evenly distributed in the face-on-polymers. The difference in the distribution of the backbone orientation correlates with the difference in the thickness dependence on the fill factor. We thus propose that the distribution of the backbone orientation is an important factor to understand the performance of polymer-based photovoltaic cells and that the cell structure should be carefully selected by considering the distribution for maximizing the performance.

Naphthobischalcogenadiazole Conjugated Polymers: Emerging Materials for Organic Electronics

π-Conjugated polymers are an important class of materials for organic electronics. In the past decade, numerous polymers with donor-acceptor molecular structures have been developed and used as the active materials for organic devices, such as organic field-effect transistors (OFETs) and organic photovoltaics (OPVs). The choice of the building unit is the primary step for designing the polymers. Benzochalcogenadiazoles (BXzs) are one of the most familiar acceptor building units studied in this area. As their doubly fused system, naphthobischalcogenadiazoles (NXzs), i.e., naphthobisthiadiazole (NTz), naphthobisoxadiazole (NOz), and naphthobisselenadiazole (NSz) are emerging building units that provide interesting electronic properties and highly self-assembling nature for π-conjugated polymers. With these fruitful features, π-conjugated polymers based on these building units demonstrate great performances in OFETs and OPVs. In particular, in OPVs, NTz-based polymers have exhibited more than 10% efficiency, which is among the highest values reported so far. In this Progress Report, the synthesis, properties, and structures of NXzs and their polymers is summarized. The device performance is also highlighted and the structure-property relationships of the polymers are discussed.

Direct Arylation Strategies in the Synthesis of π-Extended Monomers for Organic Polymeric Solar Cells

π-conjugated macromolecules for organic polymeric solar cells can be rationally engineered at the molecular level in order to tune the optical, electrochemical and solid-state morphology characteristics, and thus to address requirements for the efficient solid state device implementation. The synthetic accessibility of monomers and polymers required for the device is getting increasing attention. Direct arylation reactions for the production of the π-extended scaffolds are gaining importance, bearing clear advantages over traditional carbon-carbon forming methodologies. Although their use in the final polymerization step is already established, there is a need for improving synthetic accessibility to implement them also in the monomer synthesis. In this review, we discuss recent examples highlighting this useful strategy.

A Novel Naphtho[1,2-c:5,6-c']Bis([1,2,5]Thiadiazole)-Based Narrow-Bandgap π-Conjugated Polymer with Power Conversion Efficiency Over 10

A novel naphtho[1,2-c:5,6-c']bis([1,2,5]-thiadiazole)-based narrow-bandgap π-conjugated polymer is designed for application in polymer solar cells. Remarkable power conversion efficiencies over 10% can be achieved based on both conventional and inverted device architectures with thick photoactive layers, which are processed by using chlorinated or nonhalogenated solvents, suggesting its great promise toward practical applications based on high-throughput roll-to-roll processing.

Bi-diketopyrrolopyrrole (Bi-DPP) as a novel electron accepting compound in low band gap π-conjugated donor-acceptor copolymers/oligomers

The synthesis and characterization of a novel 2,5-diketopyrrolo[3,4-c]pyrrole(DPP)-based accepting building block with the scheme DPP-neutral small linker-DPP (Bi-DPP) is presented, which was utilized as electron accepting moiety for low band gap π-conjugated donor–acceptor copolymers as well as for a donor–acceptor small molecule. The electron accepting moiety Bi-DPP was prepared via a novel synthetic pathway by building up two DPP moieties step by step simultaneously starting from a neutral phenyl core unit. Characterization of the synthesized oligomeric and polymeric materials via cyclic voltammetry afford LUMO energy levels from −3.49 to −3.59 eV as well as HOMO energy levels from −5.07 to −5.34 eV resulting in low energy band gaps from 1.52 to 1.81 eV. Spin coating of the prepared donor–acceptor oligomers/polymers resulted in well-defined films. Moreover, UV–vis measurements of the investigated donor–acceptor systems showed a broad absorption over the whole visible region. It is demonstrated that Bi-DPP as an electron accepting moiety in donor–acceptor systems offer potential properties for organic solar cell devices.

Impact of Fluorine Substituents on π-Conjugated Polymer Main-Chain Conformations, Packing, and Electronic Couplings

Taking the π-conjugated polymers PBDT[2X]T (X = H, F) as model systems, the effects of fluorine substitution on main-chain conformations, packing, and electronic couplings are examined. This combination of molecular dynamics simulations and solid-state NMR shows that a higher propensity for backbone planarity in PBDT[2F]T leads to more pronounced, yet staggered, chain stacking, which generally leads to higher electronic couplings and binding energy between neighboring chains.

Thieno[3,4-c]phosphole-4,6-dione: A Versatile Building Block for Phosphorus-Containing Functional π-Conjugated Systems

A versatile phosphorus-containing π-conjugated building block, thieno[3,4-c]phosphole-4,6-dione (TPHODO), has been developed. The utility of this simple but hitherto unknown building block has been demonstrated by preparing novel functional organophosphorus compounds and bandgap-tunable conjugated polymers.

Dehydrocoupling and Silazane Cleavage Routes to Organic-Inorganic Hybrid Polymers with NBN Units in the Main Chain

Despite the great potential of both π-conjugated organoboron polymers and BN-doped polycyclic aromatic hydrocarbons in organic optoelectronics, our knowledge of conjugated polymers with B-N bonds in their main chain is currently scarce. Herein, the first examples of a new class of organic-inorganic hybrid polymers are presented, which consist of alternating NBN and para-phenylene units. Polycondensation with B-N bond formation provides facile access to soluble materials under mild conditions. The photophysical data for the polymer and molecular model systems of different chain lengths reveal a low extent of π-conjugation across the NBN units, which is supported by DFT calculations. The applicability of the new polymers as macromolecular polyligands is demonstrated by a cross-linking reaction with Zr(IV) .

A Low Reabsorbing Luminescent Solar Concentrator Employing π-Conjugated Polymers

A highly efficient thin-film luminescent solar concentrator (LSC) utilizing two π-conjugated polymers as antennae for small amounts of the valued perylene bisimide Lumogen F Red 305 is presented. The LSC exhibits high photoluminescence quantum yield, low reabsorption, and relatively low refractive indices for waveguide matching. A Monte Carlo simulation predicts the LSC to possess exceptionally high optical efficiencies on large scales.

Low Bandgap Semiconducting Copolymer Nanoparticles by Suzuki Cross-Coupling Polymerization in Alcoholic Dispersed Media

The synthesis and formulation of organic semiconductors for the emerging technology of organic electronics requires the use of preparative methods and solvents being environment friendly. Today most of the active layer materials for the organic photovoltaic devices and modules are using chlorinated solvents, which are toxic and hazardous. In this work, the synthesis of poly[N-9'-heptadecanyl-2,7-carbazole-alt-5,5-(4,7-di-2-thienyl-2',1',3'-benzothiadiazole] (PCDTBT) in propan-1-ol is presented as the dispersant continuous phase in the presence of poly(vinylpyrrolidone) used as stabilizer. Suzuki-Miyaura polycondensation of 9-(9-heptadecanyl)-9H-carbazole-2,7-diboronic acid bis(pinacol) ester and 4,7-bis(2-bromo-5-thienyl)-2,1,3-benzothiadiazole in alcohol dispersion yields colloidally stable nanoparticles of PCDTBT with particles size of 330-1300 nm, depending on the stabilizer concentration. Other reaction parameters are also discussed such as the amount of base or Pd catalyst.

Singlet fission of hot excitons in π-conjugated polymers

We used steady-state photoinduced absorption (PA), excitation dependence (EXPA(ω)) spectrum of the triplet exciton PA band, and its magneto-PA (MPA(B)) response to investigate singlet fission (SF) of hot excitons into two separated triplet excitons, in two luminescent and non-luminescent π-conjugated polymers. From the high energy step in the triplet EXPA(ω) spectrum of the luminescent polymer poly(dioctyloxy)phenylenevinylene (DOO-PPV) films, we identified a hot-exciton SF (HE-SF) process having threshold energy at E≈2E(T) (=2.8 eV, where ET is the energy of the lowest lying triplet exciton), which is about 0.8 eV above the lowest singlet exciton energy. The HE-SF process was confirmed by the triplet MPA(B) response for excitation at E>2E(T), which shows typical SF response. This process is missing in DOO-PPV solution, showing that it is predominantly interchain in nature. By contrast, the triplet EXPA(ω) spectrum in the non-luminescent polymer polydiacetylene (PDA) is flat with an onset at E=E(g) (≈2.25 eV). From this, we infer that intrachain SF that involves a triplet-triplet pair state, also known as the 'dark' 2A(g) exciton, dominates the triplet photogeneration in PDA polymer as E(g)>2E(T). The intrachain SF process was also identified from the MPA(B) response of the triplet PA band in PDA. Our work shows that the SF process in π-conjugated polymers is a much more general process than thought previously.

Dependence of crystallite formation and preferential backbone orientations on the side chain pattern in PBDTTPD polymers

Alkyl substituents appended to the π-conjugated main chain account for the solution-processability and film-forming properties of most π-conjugated polymers for organic electronic device applications, including field-effect transistors (FETs) and bulk-heterojunction (BHJ) solar cells. Beyond film-forming properties, recent work has emphasized the determining role that side-chain substituents play on polymer self-assembly and thin-film nanostructural order, and, in turn, on device performance. However, the factors that determine polymer crystallite orientation in thin-films, implying preferential backbone orientation relative to the device substrate, are a matter of some debate, and these structural changes remain difficult to anticipate. In this report, we show how systematic changes in the side-chain pattern of poly(benzo[1,2-b:4,5-b']dithiophene-alt-thieno[3,4-c]pyrrole-4,6-dione) (PBDTTPD) polymers can (i) influence the propensity of the polymer to order in the π-stacking direction, and (ii) direct the preferential orientation of the polymer crystallites in thin films (e.g., "face-on" vs "edge-on"). Oriented crystallites, specifically crystallites that are well-ordered in the π-stacking direction, are believed to be a key contributor to improved thin-film device performance in both FETs and BHJ solar cells.

π-Conjugated polymer anisotropic organogel nanofibrous assemblies for thermoresponsive photonic switches

The present work demonstrates one of the first examples of π-conjugated photonic switches (or photonic wave plates) based on the tailor-made π-conjugated polymer anisotropic organogel. New semicrystalline segmented π-conjugated polymers are designed with rigid aromatic oligophenylenevinylene π-core and flexible alkyl chain along the polymer backbone. These polymers are found to be self-assembled as semicrystalline or amorphous with respect to the number of carbon atoms in the alkyl units. These semicrystalline polymers produce organogels having nanofibrous morphology of 20 nm thickness with length up to 5 μm. The polymer organogel is aligned in a narrow glass capillary, and this anisotropic gel device is further demonstrated as photonic switches. The glass capillary device behaves as typical λ/4 photonic wave plates upon the illumination of the plane polarized light. The λ/4 photonic switching ability is found to be maximum at θ = 45° angle under the cross polarizers. The orthogonal arrangements of the gel capillaries produce dark and bright spots as on-and-off optical switches. Thermoreversibility of the polymer organogel (also its xerogel) was exploited to construct thermoresponsive photonic switches for the temperature window starting from 25 to 160 °C. The organic photonic switch concept can be adapted to large number of other π-conjugated materials for optical communication and storage.

Synthesis of Isothianaphthene (ITN) and 3,4-Ethylenedioxy-Thiophene (EDOT)-Based Low-Bandgap Liquid Crystalline Conjugated Polymers

Copolymers, consisting of isothianaphthene and phenylene derivatives with liquid crystal groups, were synthesized via Migita-Kosugi-Stille polycondensation reaction. IR absorption, UV-vis optical absorption, and PL spectroscopy measurements were carried out. Thermotropic liquid crystallinity of the polymers with bandgap of ~2.5 eV was confirmed.