1
|
P-bridged Fe-X-Co coupled sites in hollow carbon spheres for efficient hydrogen generation. J Colloid Interface Sci 2024; 660:792-799. [PMID: 38277836 DOI: 10.1016/j.jcis.2024.01.145] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/24/2023] [Revised: 01/14/2024] [Accepted: 01/21/2024] [Indexed: 01/28/2024]
Abstract
Non-precious metals have shown attractive catalytic prospects in hydrogen production from ammonia borane hydrolysis. However, the sluggish reaction kinetics in the hydrolysis process remains a challenge. Herein, P-bridged Fe-X-Co coupled sites in hollow carbon spheres (Fe-CoP@C) has been synthesized through in situ template solvothermal and subsequent surface-phosphorization. Benefiting from the optimized electronic structure induced by Fe doping to enhance the specific activity of Co sites, bimetallic synergy and hollow structure, the as-prepared Fe-CoP@C exhibits superior performances with a turnover frequency (TOF) of 183.5 min-1, and stability of over 5 cycles for ammonia borane hydrolysis, comparable to noble metal catalysts. Theoretical calculations reveal that the P-bridged Fe-X-Co coupled sites on the Fe-CoP@C catalyst surfaces is beneficial to adsorb reactant molecules and reduce their reaction barrier. This strategy of constructing hollow P-bridged bimetallic coupled sites may open new avenues for non-precious metal catalysis.
Collapse
|
2
|
A highly selective and sensitive sensor for promethazine based on molecularly imprinted interface coated Au/Sn bimetal nanoclusters functionalized acupuncture needle microelectrode. Anal Chim Acta 2023; 1269:341395. [PMID: 37290856 DOI: 10.1016/j.aca.2023.341395] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/18/2023] [Revised: 04/21/2023] [Accepted: 05/17/2023] [Indexed: 06/10/2023]
Abstract
Promethazine (PMZ) is an effective antihistamine that is used as a nerve tranquilizer to treat mental disorders. However, drug abuse causes harm to the human body and also pollutes the environment to a certain extent. Therefore, it is crucial to develop a highly selective and sensitive biosensor for PMZ determination. An acupuncture needle (AN) was used as an electrode in 2015, and further research on the electrode's essence in electrochemistry is needed. In this work, a sensor based on a surface imprinted film coordinated Au/Sn biometal was first fabricated on AN via electrochemistry. The obtained cavities showed complementary and suitable sites for "N atom" electron transfer through the phenyl ring structure in promethazine, which is rigorous for the configuration near the interface. Under the optimal conditions, MIP/Au/Sn/ANE exhibits a good linear relationship in the range of 0.5 μM-500 μM, and the detection limit (LOD) is 0.14 μM (S/N = 3). The sensor exhibits good repeatability, stability, and selectivity and can be successfully used to analyze and detect PMZ in human serum and environmental water. The findings are scientifically significant for AN electrochemistry and the sensors have potential for in vivo medicamentosus monitoring in the future.
Collapse
|
3
|
Study on bimetallic composites interface of Al/SiC p-Al matrix composites prepared by liquid-liquid compound casting. Heliyon 2023; 9:e18607. [PMID: 37576192 PMCID: PMC10413072 DOI: 10.1016/j.heliyon.2023.e18607] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/08/2023] [Revised: 07/21/2023] [Accepted: 07/24/2023] [Indexed: 08/15/2023] Open
Abstract
Aimed at the preparation of bimetallic composites by using a liquid-liquid compound casting method with a sound interface, this study focused on the interface evolution with an increase in the pouring time interval. The results revealed that the melt mixing occurred when the pouring interval was 3 s. The transition zone appeared at the interface when the pouring interval was 10 s, and a good metallurgical bond was obtained. When the pouring interval was 20 s, a discontinuous oxide layer appeared at the interface. The oxide layer gap formed a channel for the transport of the SiC particles.
Collapse
|
4
|
Degradation of trichloroethylene vapors by micrometric zero-valent FeCu and FeNi bimetals under partially saturated conditions. JOURNAL OF CONTAMINANT HYDROLOGY 2023; 257:104204. [PMID: 37301040 DOI: 10.1016/j.jconhyd.2023.104204] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/12/2023] [Revised: 04/14/2023] [Accepted: 05/29/2023] [Indexed: 06/12/2023]
Abstract
The degradation of trichloroethylene (TCE) vapors by zero-valent Iron-Copper (Fe-Cu) and Iron-Nickel (Fe-Ni) bimetals with 1%, 5% and 20% weight content (%wt) of Cu or Ni was tested in anaerobic batch vapor systems carried out at ambient room temperature (20 ± 2 °C) under partially saturated conditions. The concentrations of TCE and byproducts were determined at discrete reaction time intervals (4 h-7 days) by analyzing the headspace vapors. In all the experiments, up to 99.9% degradation of TCE in the gas phase was achieved after 2-4 days with zero-order TCE degradation kinetic constants in the range of 134-332 g mair-3d-1. Fe-Ni showed a higher reactivity towards TCE vapors compared to Fe-Cu, with up to 99.9% TCE dechlorination after 2 days of reaction, i.e., significantly higher than zero-valent iron alone that in previous studies was found to achieve comparable TCE degradation after minimum 2 weeks of reaction. The only detectable byproducts of the reactions were C3-C6 hydrocarbons. Neither vinyl chloride or dichloroethylene peaks were detected in the tested conditions above their method quantification limits that were in the order of 0.01 g mair-3. In view of using the tested bimetals in horizontal permeable reactive barriers (HPRBs) placed in the unsaturated zone to treat chlorinated solvent vapors emitted from contaminated groundwater, the experimental results obtained were integrated into a simple analytical model to simulate the reactive transport of vapors through the barrier. It was found that an HPRB of 20 cm could be potentially effective to ensure TCE vapors reduction.
Collapse
|
5
|
Bifunctional catalytic degradation of diclofenac over Cu-Pd co-modified sponge iron-based trimetal: Parameter optimization. ENVIRONMENTAL RESEARCH 2023; 227:115640. [PMID: 36933636 DOI: 10.1016/j.envres.2023.115640] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/25/2022] [Revised: 03/01/2023] [Accepted: 03/04/2023] [Indexed: 05/08/2023]
Abstract
Currently, the pharmaceutical and personal care products (PPCPs) have posed great challenge to advanced oxidation techniques (AOTs). In this study, we decorated sponge iron (s-Fe0) with Cu and Pd (s-Fe0-Cu-Pd) and further optimized the synthesis parameters with a response surface method (RSM) to rapidly degrade diclofenac sodium (DCF). Under the RSM-optimized conditions of Fe: Cu: Pd = 100: 4.23: 0.10, initial solution pH of 5.13, and input dosage of 38.8 g/L, 99% removal of DCF could be obtained after 60 min of reaction. Moreover, the morphological structure of trimetal was characterized with high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), X-ray diffraction (XRD), X-ray photoelectron spectra (XPS). Electron spin resonance (ESR) signals have also been applied to capture reactive hydrogen atoms (H*), superoxygen anions, hydroxyl radicals, and single state oxygen (1O2). Furthermore, the variations of DCF and its selective degradation products over a series of s-Fe0-based bi(tri)metals have been compared. Additionally, the degradation mechanism of DCF has also been explored. To our best knowledge, this is the first report revealing the selective dechlorination of DCF with low toxicity over Pd-Cu co-doped s-Fe0 trimetal.
Collapse
|
6
|
Nanofabrication of cobalt-tellurium using Allium sativum extract and its protective efficacy against H 2O 2-induced oxidative damage in HaCaT cells. ENVIRONMENTAL RESEARCH 2023; 226:115659. [PMID: 36906266 DOI: 10.1016/j.envres.2023.115659] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/07/2023] [Revised: 03/03/2023] [Accepted: 03/08/2023] [Indexed: 06/18/2023]
Abstract
Allium sativum (A. sativum)is well known for its therapeutic and culinary uses. Because of their high medicinal properties, the clove extract was selected to synthesize cobalt-tellurium nanoparticles. The aim of the study was to evaluate the protective activity of the nanofabricated cobalt-tellurium using A. sativum (Co-Tel-As-NPs) against H2O2-induced oxidative damage in HaCaT cells. Synthesized Co-Tel-As-NPs were analyzed using UV-Visible spectroscopy, FT-IR, EDAX, XRD, DLS, and SEM. Various concentrations of Co-Tel-As-NPs were used as a pretreatment on HaCaT cells before H2O2 was added. Then, the cell viability and mitochondrial damage were compared between pretreated and untreated control cells using an array of assays (MTT, LDH, DAPI, MMP, and TEM), and the intracellular ROS, NO, and antioxidant enzyme production were examined. In the present research, Co-Tel-As-NPs at different concentrations (0.5, 1.0, 2.0, and 4.0μg/mL) were tested for toxicity using HaCaT cells. Furthermore, the effect of H2O2 on the viability of HaCaT cells was evaluated using the MTT assay for Co-Tel-As-NPs. Among those, Co-Tel-As-NPs at 4.0 μg/mL showed notable protection; with the same treatment, cell viability was discovered to be 91% and LDH leakage was also significantly decreased. Additionally, the measurement of mitochondrial membrane potential was significantly decreased by Co-Tel-As-NPs pretreatment against H2O2. The recovery of the condensed and fragmented nuclei brought about by the action of Co-Tel-As-NPs was identified using DAPI staining. TEM examination of the HaCaT cells revealed that the Co-Tel-As-NPs had a therapeutic effect against H2O2 keratinocyte damage.
Collapse
|
7
|
Advances in Noble Metal-Decorated Metal Oxide Nanomaterials for Chemiresistive Gas Sensors: Overview. NANO-MICRO LETTERS 2023; 15:89. [PMID: 37029296 PMCID: PMC10082150 DOI: 10.1007/s40820-023-01047-z] [Citation(s) in RCA: 22] [Impact Index Per Article: 22.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 11/12/2022] [Accepted: 02/25/2023] [Indexed: 06/19/2023]
Abstract
Highly sensitive gas sensors with remarkably low detection limits are attractive for diverse practical application fields including real-time environmental monitoring, exhaled breath diagnosis, and food freshness analysis. Among various chemiresistive sensing materials, noble metal-decorated semiconducting metal oxides (SMOs) have currently aroused extensive attention by virtue of the unique electronic and catalytic properties of noble metals. This review highlights the research progress on the designs and applications of different noble metal-decorated SMOs with diverse nanostructures (e.g., nanoparticles, nanowires, nanorods, nanosheets, nanoflowers, and microspheres) for high-performance gas sensors with higher response, faster response/recovery speed, lower operating temperature, and ultra-low detection limits. The key topics include Pt, Pd, Au, other noble metals (e.g., Ag, Ru, and Rh.), and bimetals-decorated SMOs containing ZnO, SnO2, WO3, other SMOs (e.g., In2O3, Fe2O3, and CuO), and heterostructured SMOs. In addition to conventional devices, the innovative applications like photo-assisted room temperature gas sensors and mechanically flexible smart wearable devices are also discussed. Moreover, the relevant mechanisms for the sensing performance improvement caused by noble metal decoration, including the electronic sensitization effect and the chemical sensitization effect, have also been summarized in detail. Finally, major challenges and future perspectives towards noble metal-decorated SMOs-based chemiresistive gas sensors are proposed.
Collapse
|
8
|
Modulating photothermal properties by integration of fined Fe-Co in confined carbon layer of SiO 2 nanosphere for pollutant degradation and solar water evaporation. ENVIRONMENTAL RESEARCH 2023; 222:115365. [PMID: 36706906 DOI: 10.1016/j.envres.2023.115365] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/05/2022] [Revised: 01/15/2023] [Accepted: 01/23/2023] [Indexed: 06/18/2023]
Abstract
Environmental governance by photothermal materials especially for the separation of organic pollutants and regeneration of freshwater afford growing attention owing to their special solar-to-heat properties. Here, we construct a special functional nanosphere composed of an internal silica core coated by a thin carbon layer encapsulated plasmonic bimetallic FeCo2O4 spinel (SiO2@CoFe/C) by a facile self-assembled approach and tuned calcination. Through combining the advantage of bimetallic Fe-Co and carbon layer, this obtained nanosphere affords improved multiple environmental governing functions including peroxymonosulfate (PMS) activation to degrade pollutants and photothermal interfacial solar water evaporation. Impressively, fined bimetal (FeCo) species (20 nm) acted as main catalytic substance were distributed on the N-doping carbon thin layer, which favors electron transfer and reactive accessibility of active metals. The increasing treatment temperature of catalysts caused the optimization of the surface active metal species and tuning catalytic properties in the AOPs. Besides, the incorporation of Co in the SiO2@CoFe/C-700 could enable the improved PMS activation efficiency compared to SiO2@Fe/C-700 and the mixed SiO2@Co/C-700 and SiO2@Fe/C-700, hinting a synergetic promotion effect. The bimetal coupled catalyst SiO2@CoFe/C-700 affords enhanced photothermal properties compared to SiO2@Co/C-700. Furthermore, photothermal catalytic PMS activation using optimal SiO2@CoFe/C-700 was further explored in addressing stubborn pollutants including oxytetracycline, sulfamethoxazole, 2, 4-dichlorophenol, and phenol. The free radical quenching control suggests that both the sulfate radical, hydroxyl radical, superoxide radical, and singlet oxygen species are involved in the degradation, while the hydroxyl radical and singlet oxygen play a dominant role. Furthermore, the implementation of a solar-driven interfacial water evaporation model using SiO2@CoFe/C-700 was further studied to obtain freshwater regeneration (1.26 kg m-2 h-1, 76.81% efficiency), indicating the comprehensive ability of the constructed nanocomposites for treating complicated environmental pollution including organics removal and freshwater regeneration.
Collapse
|
9
|
Degradation of sulfamethazine in water by sulfite activated with zero-valent Fe-Cu bimetallic nanoparticles. JOURNAL OF HAZARDOUS MATERIALS 2022; 431:128601. [PMID: 35255337 DOI: 10.1016/j.jhazmat.2022.128601] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/28/2022] [Revised: 02/24/2022] [Accepted: 02/26/2022] [Indexed: 06/14/2023]
Abstract
In this work, zero-valent Fe-Cu bimetallic nanoparticles were synthesized using a facile method, and applied to activate sulfite for the degradation of sulfamethazine (SMT) from the aqueous solution. The key factors influencing SMT degradation were investigated, namely the theoretical loading of Cu, Fe-Cu catalyst dosage, sulfite concentration and initial solution pH. The experimental results showed that the Fe-Cu/sulfite system exhibited a much better performance in SMT degradation than the bare Fe0/sulfite system. The mechanism and possible degradation pathway of SMT in Fe-Cu/sulfite system were revealed. The reactive radicals that played a dominant role in the SMT degradation process were •OH and SO4•-, while the loading of Cu induced the synergistic effect between Fe and Cu. The redox cycle between Cu(I)/Cu(II) remarkably contributed to the conversion of Fe(III) to Fe(II), greatly enhancing the catalytic performance of Fe-Cu bimetal. In real groundwater applications, the Fe-Cu/sulfite system also exhibited satisfactory SMT degradation. The 30-day aging tests of Fe-Cu particles demonstrated that the aging of catalyst was not obviously affecting the removal of SMT. Furthermore, the reusability of catalyst was evidenced by the recycling experiments. This study provides a promising application of bimetal activated sulfite for enhanced contaminant degradation in groundwater.
Collapse
|
10
|
Nonprecious bimetallic Fe, Mo-embedded N-enriched porous biochar for efficient oxidation of aqueous organic contaminants. JOURNAL OF HAZARDOUS MATERIALS 2022; 422:126776. [PMID: 34399226 DOI: 10.1016/j.jhazmat.2021.126776] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/20/2021] [Revised: 07/21/2021] [Accepted: 07/27/2021] [Indexed: 06/13/2023]
Abstract
Bimetallic Fe- and Mo-embedded N-enriched porous biochar (Fe-Mo@N-BC) is developed and serves as a cost-effective and highly efficient catalyst for mineralization of non-biodegradation organic contaminants. Fe-Mo@N-BC was prepared by pyrolysis of complex Fe/Mo -containing precursors. Transmission electron microscopy and elemental mapping suggested that Fe and Mo are uniformly dispersed in nitrogen-doped biochar with hierarchical mesopores. In comparison to Fe@N-BC and Mo@N-BC, Fe-Mo@N-BC exhibited a superior activity for activating peroxymonosulfate (PMS). The stable activity was ascribed to N-doping and synergistic effect of Fe and Mo species, where both Fe-Nx and Mo-Nx can simultaneously serve as the active sites and N-BC can act as a carrier and an activator as well as an electron mediator. Electron paramagnetic resonance and quenching experiments indicated that HO•, O2•- and 1O2 were responsible for organic degradation. The effects of PMS dosage, initial Orange II concentration, temperature, solution pH, coexisting anions and humic acids on organic degradation were also investigated. With the assistance of an external magnet, Fe-Mo@N-BC can be easily separated after reaction and remains stable in the reusability tests. This work demonstrates a feasible strategy towards the fabrication of Fe, Mo-embedded N-enriched porous biochar catalysts for the detoxification of organic contaminants.
Collapse
|
11
|
A comparison study of Fenton-like and Fenton reactions in dichloromethane removal. ENVIRONMENTAL TECHNOLOGY 2021; 43:1-11. [PMID: 34238123 DOI: 10.1080/09593330.2021.1954096] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/10/2021] [Accepted: 06/29/2021] [Indexed: 06/13/2023]
Abstract
Dichloromethane (DCM), as a low-chlorinated organic compound, is hardly to be degraded through the reductive dechlorination pathway. In this study, the removal of DCM in Fenton-like system, using activated carbon fibres-supported zero-valence Fe/Ni nanoparticles (ACF-Fe/Ni) as catalysts, was investigated and compared with that of a traditional Fenton system (Fe2+/H2O2). The influence of vital parameters, including initial solution pH, DCM concentration, catalyst and H2O2 dosages, temperature and cosolute on the removal of DCM, was systematically studied. The results showed that 94.2% of DCM with an initial concentration of 5 mg/L could be removed in the Fenton-like reaction under the optimum condition: initial pH of 2.0, 0.4 g/L of ACF-Fe/Ni, 10 mM of H2O2 and a temperature of 30°C. In comparison, the removal of DCM in the Fenton-like system was faster than that of the Fenton system and the corresponding activation energies were 39.69 and 33.82 kJ/mol, respectively. The coexistence of solute was adverse to the removal of DCM in both Fenton-like and Fenton systems. Moreover, the active species for DCM removal in the Fenton-like system was confirmed as hydroxyl radical (·OH) via the quenching experiment and electron paramagnetic resonance measurement. The incomplete mineralisation (41.7%) of DCM after reaction indicated that the Fenton-like technology had the potential to realise DCM's non-toxic and harmless conversion and organic intermediates formed needed to take longer time to be decomposed.
Collapse
|
12
|
Composite of chitosan and bentonite cladding Fe-Al bimetal: Effective removal of nitrate and by-products from wastewater. ENVIRONMENTAL RESEARCH 2020; 184:109336. [PMID: 32182480 DOI: 10.1016/j.envres.2020.109336] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/13/2019] [Revised: 12/20/2019] [Accepted: 03/02/2020] [Indexed: 06/10/2023]
Abstract
Chitosan was used as crosslinking agent to load bimetal particles onto bentonite. The Fe-Al bimetal chitosan bentonite (Fe-Al bimetal @ bent) complex was prepared for the efficient removal of nitrate from wastewater and its by-products at low temperature. The samples were characterized by Scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FTIR), X-Ray Diffraction (XRD), Zeta potential, X-ray photoelectron spectroscopy (XPS) and Brunauer-Emmett-Teller (BET) surface area and Energy Dispersive X-ray Detector (EDX). SEM and EDX showed that Fe0 was deposited on the surface of aluminum, the Fe-Al bimetal were surrounded by chitosan and bentonite. XRD showed that Al can effectively protect the reactivity of Fe. The experimental results of nitrate removal showed that pH was the main factor affecting on nitrate removal rate and performance. The removal efficiency of nitrate wastewater with a concentration of 50 mg/L was approximately 90% in 60min. Fe-Al bimetal @ bent has better nitrate removal performance and faster reduction rate at low temperature(2-7 °C) than normal temperature (25 °C). The reason was that chitosan, bentonite and bimetal have excellent synergistic effect. It can effectively improve the reaction rate, pH buffering capacity, reduce secondary pollution and total nitrogen (TN). Fe-Al bimetal @ bent has better N2 selectivity than Fe-Al bimetal.
Collapse
|
13
|
Effect of O 2, Ni 0 coatings, and iron oxide phases on pentachlorophenol dechlorination by zero-valent iron. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2019; 26:27687-27698. [PMID: 31338765 DOI: 10.1007/s11356-019-06009-w] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/30/2019] [Accepted: 07/16/2019] [Indexed: 06/10/2023]
Abstract
This study explores the zero-valent iron (ZVI) dechlorination of pentachlorophenol (PCP) and its dependence on the dissolved oxygen (O2), presence/formation of iron oxides, and presence of nickel metal on the ZVI surface. Compared to the anoxic system, PCP dechlorination was slower in the presence of O2, which is a potential competitive electron acceptor. Despite O2 presence, Ni0 deposited on the ZVI surfaces catalyzed the hydrogenation reactions and enhanced the PCP dechlorination by Ni-coated ZVI bimetal (Nic/Fe). The presence of O2 led to the formation of passivating oxides (maghemite, hematite, lepidocrocite, ferrihydrite) on the ZVI and Nic/Fe bimetallic surfaces. These passive oxides resulted in greater PCP incorporation (sorption, co-precipitation, and/or physical entrapment with the oxides) and decreased PCP dechlorination in the oxic systems compared to the anoxic systems. As received ZVI comprised of a wustite film, and in the presence of O2, only ≈ 17% PCP dechlorination observed after 25 days of exposure with tetrachlorophenol being detected as the end product. Wustite remained as the predominant oxide on as received ZVI during the 25 days of reaction with PCP under oxic and anoxic conditions. ZVI acid-pretreatment resulted in the replacement of wustite with magnetite and enhanced PCP degradation (e.g. ≈ 52% of the initial PCP dechlorinated after 25 days under oxic condition) with accumulation of mixtures of tetra-, tri-, and dichlorophenols. When the acid-washed ZVI was rinsed in NiSO4/H2SO4 solution, Ni0 deposited on the ZVI surface and all the wustite were replaced with magnetite. After 25 days of exposure to the Nic/Fe, ≈ 78% and 97% PCP dechlorination occurred under oxic and anoxic conditions, respectively, producing predominantly phenol. Wustite and magnetite are respectively electrically insulating and conducting oxides and influenced the dechlorination and H2 production. In conclusion, this study clearly demonstrates that the dissolved oxygen present in the aqueous solution decreases the PCP dechlorination and increases the PCP incorporation when using ZVI and Nic/Fe bimetallic systems. The findings provide novel insights towards deciphering and optimizing the performance of complex ZVI and bimetallic systems for PCP dechlorination in the presence of O2.
Collapse
|
14
|
Removal of bacteriophage f2 in water by Fe/Ni nanoparticles: Optimization of Fe/Ni ratio and influencing factors. THE SCIENCE OF THE TOTAL ENVIRONMENT 2019; 649:995-1003. [PMID: 30179827 DOI: 10.1016/j.scitotenv.2018.08.380] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/27/2018] [Revised: 08/15/2018] [Accepted: 08/26/2018] [Indexed: 05/10/2023]
Abstract
Pathogenic viruses in water are seriously harmful to human health and highly resistant to conventional disinfections. As a kind of promising attempts for pollution remediation, Fe-based nanoparticles show excellent performance in removing contaminants. In this study, the Fe/Ni nanoparticles (Fe/Ni NPs) were synthesized using the self-designed device and used for bacteriophage inactivation in water. Scanning electron microscope (SEM) and X-ray diffraction (XRD) showed that the as-prepared Fe/Ni particles were spherical and the average particle size was 93 nm. The synthesized Fe/Ni NPs achieved much higher removal efficiency of bacteriophage f2 than nanoscale zero-valent iron (nZVI), while Ni nanoparticles (Ni NPs) showed no removal effect on the bacteriophage f2. The highest removal efficiency of bacteriophage f2 by Fe/Ni NPs was obtained when the primary ratio of Fe:Ni was 5:1. In addition, the removal efficiency of phage f2 under aerobic condition was significantly higher than that under anaerobic condition with Fe/Ni NPs, and the role of Ni was proved as a catalyst in the system. Besides, the effect of initial pH, initial concentration of bacteriophage f2, particles dose, rotation rate, and temperature on the removal efficiency of bacteriophage f2 were studied. The result showed that the removal efficiency of bacteriophage f2 did not change obviously in the test pH range (5-8), and was positively related with the rotation rate and negatively related with the initial concentration of bacteriophage f2. The particles dose could increase the removal efficiency of phage f2, but the removal efficiency would decrease when the dose was too much due to the aggregation of nanoparticles. The increase of temperature could increase the removal efficiency initially, but decrease the removal efficiency finally due to the accelerated corrosion of iron.
Collapse
|
15
|
Debromination of 2,2',4,4'-tetrabromodiphenyl ether (BDE-47) by synthetic Pd/Fe 0 and Cu/Fe 0 in different protic solvents. CHEMOSPHERE 2018; 212:946-953. [PMID: 30286551 DOI: 10.1016/j.chemosphere.2018.09.004] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/01/2018] [Revised: 08/30/2018] [Accepted: 09/01/2018] [Indexed: 06/08/2023]
Abstract
Polybrominated diphenyl ethers (PBDEs) belong to a class of persistent organic pollutants (POPs), with potential toxicity to the liver, reproductive system, and development of mammals. The highly toxic and concentrated congener, 2,2',4,4'-tetrabromodiphenyl ether (BDE-47), was chosen to investigate debromination mechanisms by the two synthetic iron-based bimetals (Pd/Fe0 and Cu/Fe0) in two protic solvents (water and ethanol). SEM, XPS, and BET analyses showed that the synthetic bimetals Pd/Fe0 and Cu/Fe0 were spherical with diameters of about 100 nm and loaded with ∼1% (wt%) of Pd and Cu, respectively. GC-MS was used for the analysis of degradation products and the chromatograms showed that both Pd/Fe0 and Cu/Fe0 bimetals had effective reducing properties in water solvent. In ethanol solvent, debromination of BDE-47 by Pd/Fe0 showed a similar high activity, but BDE-47 could be hardly degraded by Cu/Fe0. The dominant debromination products of BDE-47 by Pd/Fe0 and Cu/Fe0 were ortho-substituted and para-substituted BDEs, respectively. Active H-atomic transfer was found to play a key role in the debromination of BDE-47 by Pd/Fe0 in both, water and ethanol, with a preference for para-debromination along with the formation of dibenzo-p-furan (DF) as the by-product, mainly in water. In contrast, electron transfer with a preference for ortho-debromination was found to play a predominant role for Cu/Fe0 system in water. More importance should be provided to active H-atomic transfer for its high efficiency. In-depth study on the mechanism of formation of by-product DF would be significant for its higher toxicity, possibility of accumulation and migration in the environment.
Collapse
|
16
|
Rapid debromination of polybrominated diphenyl ethers (PBDEs) by zero valent metal and bimetals: Mechanisms and pathways assisted by density function theory calculation. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2018; 240:745-753. [PMID: 29778810 DOI: 10.1016/j.envpol.2018.05.014] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/02/2018] [Revised: 04/13/2018] [Accepted: 05/03/2018] [Indexed: 06/08/2023]
Abstract
Polybrominated diphenyl ethers (PBDEs) undergo debromination when they were exposed in zerovalent metal or bimetallic systems. Yet their debromination pathways and mechanisms in these systems were not well understood. Here we reported the debromination pathways of three BDE congeners (BDE-21, 25 and 29) by nano-zerovalent iron (n-ZVI). All these BDE congeners have three bromine substituents that were located in ortho-, meta- and para-positions. Results demonstrated that BDE-21, 25 and 29 preferentially debrominate meta-, ortho- and para-bromines, respectively, suggesting that bromine substituent at each position (i.e. ortho-, meta- or para-) of PBDEs can be preferentially removed. Singly occupied molecular orbitals of BDE anions are well correlated with their actual debromination pathways, which successfully explain why these BDE congeners exhibit certain debromination pathways in n-ZVI system. In addition, microscale zerovalent zinc (m-ZVZ), iron-based bimetals (Fe/Ag and Fe/Pd) were also used to debrominate PBDEs, with BDE-21 as target pollutant. We found that the debromination pathways of BDE-21 in m-ZVZ and Fe/Ag systems are the same to those in n-ZVI system, but were partially different from those in Fe/Pd systems. The debromination of BDE-21 in Pd-H2 system as well as the solvent kinetic isotope effect in single metal and bimetallic systems suggests that H atom transfer is the dominant mechanism in Fe/Pd system, while e-transfer is still the dominant mechanism in Fe/Ag system.
Collapse
|
17
|
Characterization of Mg-based bimetal treatment of insensitive munition 2,4-dinitroanisole. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2018; 25:24403-24416. [PMID: 29909531 DOI: 10.1007/s11356-018-2493-1] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/22/2018] [Accepted: 06/04/2018] [Indexed: 06/08/2023]
Abstract
The manufacturing of insensitive munition 2,4-dinitroanisole (DNAN) generates waste streams that require treatment. DNAN has been treated previously with zero-valent iron (ZVI) and Fe-based bimetals. Use of Mg-based bimetals offers certain advantages including potential higher reactivity and relative insensitivity to pH conditions. This work reports preliminary findings of DNAN degradation by three Mg-based bimetals: Mg/Cu, Mg/Ni, and Mg/Zn. Treatment of DNAN by all three bimetals is highly effective in aqueous solutions (> 89% removal) and wastewater (> 91% removal) in comparison with treatment solely with zero-valent magnesium (ZVMg; 35% removal). Investigation of reaction byproducts supports a partial degradation pathway involving reduction of the ortho or para nitro to amino group, leading to 2-amino-4-nitroanisole (2-ANAN) and 4-amino-2-nitroanisole (4-ANAN). Further reduction of the second nitro group leads to 2,4-diaminoanisole (DAAN). These byproducts are detected in small quantities in the aqueous phase. Carbon mass balance analysis suggests near-complete closure (91%) with 12.4 and 78.4% of the total organic carbon (TOC) distributed in the aqueous and mineral bimetal phases, respectively. Post-treatment surface mineral phase analysis indicates Mg(OH)2 as the main oxidized species; oxide formation does not appear to impair treatment.
Collapse
|
18
|
The reactivity of Fe/Ni colloid stabilized by carboxymethylcellulose (CMC-Fe/Ni) toward chloroform. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2018; 25:21049-21057. [PMID: 29767309 DOI: 10.1007/s11356-018-2030-2] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/02/2018] [Accepted: 04/13/2018] [Indexed: 06/08/2023]
Abstract
The use of stabilizers can prevent the reactivity loss of nanoparticles due to aggregation. In this study, carboxymethylcellulose (CMC) was selected as the stabilizer to synthesize a highly stable CMC-stabilized Fe/Ni colloid (CMC-Fe/Ni) via pre-aggregation stabilization. The reactivity of CMC-Fe/Ni was evaluated via the reaction of chloroform (CF) degradation. The effect of background solution which composition was affected by the preparation of Fe/Ni (Fe/Ni precursors, NaBH4 dosage) and the addition of solute (common ions, sulfur compounds) on the reactivity of CMC-Fe/Ni was also investigated. Additionally, the dried CMC-Fe/Ni was used for characterization in terms of scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The experimental results indicated that CMC stabilization greatly improved the reactivity of Fe/Ni bimetal and CF (10 mg/L) could be completely degraded by CMC-Fe/Ni (0.1 g/L) within 45 min. The use of different Fe/Ni precursors resulting in the variations of background solution seemed to have no obvious influence on the reactivity of CMC-Fe/Ni, whereas the dosage of NaBH4 in background solution showed a negative correlation with the reactivity of CMC-Fe/Ni. Besides, the individual addition of external solutes into background solution all had an adverse effect on the reactivity of CMC-Fe/Ni, of which the poisoning effect of sulfides (Na2S, Na2S2O4) was significant than common ions and sulfite.
Collapse
|
19
|
Relative roles of H-atom transfer and electron transfer in the debromination of polybrominated diphenyl ethers by palladized nanoscale zerovalent iron. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2017; 222:331-337. [PMID: 28034557 DOI: 10.1016/j.envpol.2016.12.030] [Citation(s) in RCA: 31] [Impact Index Per Article: 4.4] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/09/2016] [Revised: 12/05/2016] [Accepted: 12/07/2016] [Indexed: 06/06/2023]
Abstract
The relative significance of H-atom transfer versus electron transfer in the dehalogenation of halogenated organic compounds (HOCs) in bimetallic systems has long been debated. In this study, we have investigated this question through the case study of the debromination of 2, 2', 4, 4'-tetrabromodiphenyl ether (BDE-47). The debromination rates of isomer products of BDE-47 by palladized nano zero-valent iron (n-ZVI/Pd) in the same reactor were compared. The results confirmed a shift in the debromination pathway of BDE-47 when treated with unpalladized nano zero-valent iron (n-ZVI) vs. treatment with n-ZVI/Pd. Study showed that BDEs could be rapidly debrominated in a palladium-H2 system, and the debromination pathway in this system is the same as that in the n-ZVI/Pd system. These results suggest that the H-atom species adsorbed on the surface of palladium are responsible for the enhanced reaction rates and the shift of the debromination pathway in the n-ZVI/Pd system. The Mulliken charges, calculated with density functional theory, on bromine atoms of PBDEs were directly correlated with the susceptibility to the e-transfer pathway in the n-ZVI system and inversely correlated with the susceptibility to the H-transfer pathway in n-ZVI/Pd system. These experimentally verified correlations in BDE-47 permit the prediction of the dominant debromination pathway in other BDEs.
Collapse
|