Highly efficient catalytic Fenton-Like reactions of bimetallic Fe/Cu chelated on radiation functionalized nonwoven fabric for pollutant control

A remarkably efficient and affordable Fe/Cu bimetallic catalyst featuring a substantial light energy utilization and compatibility with a sizable substrate was developed for Fenton-like reactions aimed at pollutant control. Specifically, a novel strategy was employed to synthesize high-density metal sites (Fe:Cu ≈ 3:1) robustly embedded on polyethylene/polyethylene terephthalate nonwoven fabric (PE/PET NWF) via radiation-induced graft polymerization (RIGP) and subsequent chemical modification, labeled as Fe/Cu-PPAO. Its high effectiveness was demonstrated by degrading 50 mg/L of tetracycline hydrochloride within 30 min in the presence of H2O2 under simulate sunlight irradiation. It was investigated that amidoxime groups regulated the optical gaps and HOMO-LUMO gaps of metal ions to enable the absorption of a broader spectrum light while the Cu2+ facilitated the transfer of electrons between the bimetal ions to achieve an improved reaction path. Furthermore, X-ray absorption fine structure (XAFS) and density functional theory (DFT) calculations further revealed its special complex state and delicate electronic structure between bimetal ions and amidoxime groups. Our study offers a new strategy to synthesize high-density bimetallic sites catalyst for environmental remediation and pushes forward insight into understanding the catalytic mechanism of bimetallic Fenton-like catalysts.

Review of the application of bimetallic catalysts coupled with internal hydrogen donor for catalytic hydrogenolysis of lignin to produce phenolic fine chemicals

Lignocellulosic biomass contains lignin, an aromatic and oxygenated substance and a potential method for lignin utilization is achieved through catalytic conversion into useful phenolic and aromatic monomers. The application of monometallic catalysts for lignin hydrogenolysis reaction remains one of the major reasons for the underutilization of lignin to produce valuable chemicals. Monometallic catalysts have many limitations such as limited catalytic sites for interacting with different lignin linkages, poor catalytic activity, low lignin conversion, and low product selectivity. It is due to lack of synergy with other metallic catalysts that can enhance the catalytic activity, stability, selectivity, and overall catalytic performance. To overcome these limitations, works on the application of bimetallic catalysts that can offer higher activity, selectivity, and stability have been initiated. In this review, cutting-edge insights into the catalytic hydrogenolysis of lignin, focusing on the production of phenolic and aromatic monomers using bimetallic catalysts within an internal hydrogen donor solvent are discussed. The contribution of this work lies in a critical discussion of recent reported findings, in-depth analyses of reaction mechanisms, optimal conditions, and emerging trends in lignin catalytic hydrogenolysis. The specific effects of catalytic active components on the reaction outcomes are also explored. Additionally, this review extends beyond current knowledge, offering forward-looking suggestions for utilizing lignin as a raw material in the production of valuable products across various industrial processes. This work not only consolidates existing knowledge but also introduces novel perspectives, paving the way for future advancements in lignin utilization and catalytic processes.

Mechanism study of toluene removal using iron/nickel bimetallic catalysts supported on biochar

The present study utilized rice husk biomass as a carrier to synthesize rice husk biochar loaded with iron and nickel. Mono-metallic and bimetallic catalysts were prepared for the removal of toluene as the tar model. The efficiency of the catalysts for the removal of toluene was investigated, and finally, the removal mechanisms of mono-metallic and bimetallic catalysts for toluene were revealed. The experimental results showed that the bimetallic-loaded biochar catalysts had excellent toluene removal performance, which was closely related to the ratio of loaded Fe and Ni. Among them, the catalyst DBC-Fe2.5 %-Ni2.5 % (2.5 wt% iron loading and 2.5 wt% nickel loading) obtained through secondary calcination at 700 °C achieved the highest toluene removal efficiency of 92.76 %. The elements of Fe and Ni in the catalyst were uniformly dispersed on the surface and in the pores of the biochar, and the catalyst had a layered structure with good adsorption. Under the interaction of Fe and Ni, the agglomeration and sintering of Ni were reduced, and the surface acidity of the catalyst was increased, the surface acidity was favorable for toluene removal. The iron‑nickel catalyst did not form significant alloys when calcined at 400 °C, whereas strong metal interactions occurred at 700 °C, resulting in the formation of Fe0.64Ni0.36 alloy and NiFe2O4 alloy. This NiFe alloy had abundant active sites to enhance the catalytic cracking of toluene and provide lattice oxygen for the reaction. Furthermore, the functional groups on the catalyst surface also had an impact on toluene removal. The catalyst prepared in this paper reduces the cost of tar removal, can be applied to the removal of industrial pollutant tars, reduces the pollution of the environment, and provides theoretical guidance and technical reference for the efficient removal of tar.

Recent Advances in Bimetallic Catalysts for Methane Steam Reforming in Hydrogen Production: Current Trends, Challenges, and Future Prospects

As energy demand continues to rise and the global population steadily grows, there is a growing interest in exploring alternative, clean, and renewable energy sources. The search for alternatives, such as green hydrogen, as both a fuel and an industrial feedstock, is intensifying. Methane steam reforming (MSR) has long been considered a primary method for hydrogen production, despite its numerous advantages, the activity and stability of the conventional Ni catalysts are major concerns due to carbon formation and metal sintering at high temperatures, posing significant drawbacks to the process. In recent years, significant attention has been given to bimetallic catalysts as a potential solution to overcome the challenges associated with methane steam reforming. Thus, this review focuses on the recent advancements in bimetallic catalysts for hydrogen production through methane steam reforming. The review explores various aspects including reactor type, catalyst selection, and the impact of different operating parameters such as reaction temperature, pressure, feed composition, reactor configuration, and feed and sweep gas flow rates. The analysis and discussion revolve around key performance indicators such as methane conversion, hydrogen recovery, and hydrogen yield.

Bimetallic Cu-Fe catalysts on MXene for synergistically electrocatalytic conversion of nitrate to ammonia

NO₃^- is a common water pollutant that can serve as a potential nitrogen source for electrocatalytic NH₃ production. However, an efficient and complete removal of low NO₃^- concentrations remains a challenge. Fe₁Cu₂@MXene bimetallic catalysts were constructed on two-dimensional Ti₃C₂T_x MXene carriers via a simple solution-based synthetic method and used for the electrocatalytic reduction of NO₃^-. The combination of the rich functional groups, high electronic conductivity on the MXene surface, and the synergistic effect between the Cu and Fe sites enabled the composite to effectively catalyse NH₃ synthesis, with a 98% conversion of NO₃^- in 8 h and a selectivity for NH₃ of up to 99.6%. In addition, Fe₁Cu₂@MXene showed excellent environmental and cyclic stability at various pH values and temperatures over multiple (14) cycles. Semiconductor analysis techniques and electrochemical impedance spectroscopy confirmed that the synergistic effect provided by the dual active sites of the bimetallic catalyst enabled fast electron transport. This study provides new insights into the synergistic promotion of NO₃^- reduction reactions using bimetals.

Enabling circular economy by N-recovery: Electrocatalytic reduction of nitrate with cobalt hydroxide nanocomposites on copper foam treating low conductivity groundwater effluents

Fertilizers play a vital role in the food-energy-water nexus. The traditional method of artificial nitrogen fixation to produce ammonia is a high-energy intensive centralized process that has caused an imbalance of the N-cycle due to the release of N-species to water. Electrocatalytic nitrate reduction (ENR) to ammonia is a promising N-resource recovery alternative that can enable the circular reuse of ammonia in decentralized settings. However, the primary challenge is identifying selective and affordable electrocatalysts. Identifying electrodes that rely on something other than platinum-group metals is required to surpass barriers to using expensive and endangered elements. In this study, an earth-abundant bimetallic catalyst, Cu/Co(OH)_x, prepared and optimized by electrodeposition, demonstrates superior ammonia production. Under environmentally relevant conditions of 30 mg NO₃^--N L^-1, Cu/Co(OH)_x showed higher ammonia production than pristine Cu foam with 0.7 and 0.3 mmol NH₃ g_cat^-1 h^-1, respectively. The experimental evaluation demonstrated direct reduction and catalytic hydrogenation mechanisms in Cu/Co(OH)_x sites. Leaching analyses suggest that Cu/Co(OH)_x has outstanding stability with negligible metal concentration below the maximum contaminant level for both Cu and Co. These results provide a framework for using earth-abundant materials in ENR with comparable efficiency and energy consumption to platinum-group materials.

Electrochemical conversion of CO2 to value-added chemicals over bimetallic Pd-based nanostructures: Recent progress and emerging trends

Electrochemical conversion of CO₂ to fuels and chemicals as a sustainable solution for waste transformation has garnered tremendous interest to combat the fervent issue of the prevailing high atmospheric CO₂ concentration while contributing to the generation of sustainable energy. Monometallic palladium (Pd) has been shown promising in electrochemical CO₂ reduction, producing formate or CO depending on applied potentials. Recently, bimetallic Pd-based materials strived to fine-tune the binding affinity of key intermediates is a prominent strategy for the desired product formation from CO₂ reduction. Herein, the recent emerging trends on bimetallic Pd-based electrocatalysts are reviewed, including fundamentals of CO₂ electroreduction and material engineering of bimetallic Pd-electrocatalysts categorized by primary products. Modern analytical techniques on these novel electrocatalysts are also thoroughly studied to get insights into reaction mechanisms. Lastly, we deliberate over the challenges and prospects for Pd-based catalysts for electrochemical CO₂ conversion.

Atomically Dispersed Fe-Co Bimetallic Catalysts for the Promoted Electroreduction of Carbon Dioxide

The electroreduction reaction of CO₂ (ECO₂RR) requires high-performance catalysts to convert CO₂ into useful chemicals. Transition metal-based atomically dispersed catalysts are promising for the high selectivity and activity in ECO₂RR. This work presents a series of atomically dispersed Co, Fe bimetallic catalysts by carbonizing the Fe-introduced Co-zeolitic-imidazolate-framework (C-Fe-Co-ZIF) for the syngas generation from ECO₂RR. The synergistic effect of the bimetallic catalyst promotes CO production. Compared to the pure C-Co-ZIF, C-Fe-Co-ZIF facilitates CO production with a CO Faradaic efficiency (FE) boost of 10%, with optimal FE_CO of 51.9%, FE_H2 of 42.4% at - 0.55 V, and CO current density of 8.0 mA cm^-2 at - 0.7 V versus reversible hydrogen electrode (RHE). The H₂/CO ratio is tunable from 0.8 to 4.2 in a wide potential window of - 0.35 to - 0.8 V versus RHE. The total FE_CO+H2 maintains as high as 93% over 10 h. The proper adding amount of Fe could increase the number of active sites and create mild distortions for the nanoscopic environments of Co and Fe, which is essential for the enhancement of the CO production in ECO₂RR. The positive impacts of Cu-Co and Ni-Co bimetallic catalysts demonstrate the versatility and potential application of the bimetallic strategy for ECO₂RR.

Feature of catalysis on bimetallic alloys Zr with V, Mo, and Fe in the reaction of methanol oxidation

Catalytic behaviors of bimetallic catalysts-alloys of zirconium with vanadium, molybdenum, and iron was investigated in the oxidative dehydrogenation of methanol. The conditions for the formation of the catalyst’s active surface were revealed. The conversion of methanol into formaldehyde, dimethyl ether, and dimethoxymethane on bimetallic catalysts was studied. The characterization of catalysts was performed by XRD, XPS, and SEM. It was shown that the activity of samples increases after О₂ + Н₂ treatment and was associated with segregation of the active components of alloys (V, Mo) on the surface of catalysts and realization of their optimal oxidation state under catalysis conditions.

Bimetallic carbon nanotube encapsulated Fe-Ni catalysts from fast pyrolysis of waste plastics and their oxygen reduction properties

Carbon-based bimetallic electrocatalysts were obtained by catalytic pyrolysis of waste plastics with Fe-Ni-based catalysts and were used as efficient oxygen reduction reaction (ORR) catalysts in this study. The prepared iron-nickel alloy nanoparticles encapsulated in oxidized carbon nanotubes (FeNi-OCNTs) are solid products with a unique structure. Moreover, the chemical composition and structural features of FeNi-OCNTs were determined. The iron-nickel alloy nanoparticles were wrapped in carbon layers, and the carbon nanotubes had an outer diameter of 20-50 nm and micron-scale lengths. FeNi-OCNT with a Fe/Ni ratio of 1:2 (FeNi-OCNT12) exhibited remarkable electrochemical performance as an ORR catalyst with a positive onset potential of 1.01 V (vs. RHE) and a half-wave potential of 0.87 V (vs. RHE), which were comparable to those of a commercial 20% Pt/C catalyst. Furthermore, FeNi-OCNT12 exhibited promising long-term stability and higher tolerance to methanol than the commercial 20% Pt/C catalyst in an alkaline medium. These properties were attributable to the protective OCNT coating of the iron-nickel alloy nanoparticles.

Insight into the low-temperature decomposition of Aroclor 1254 over activated carbon-supported bimetallic catalysts obtained with XANES and DFT calculations

Novel bimetallic catalysts supported on activated carbon (AC) with high metal loadings were synthesized by carbonizing an ion-exchange resin. AC-supported Ni-Cu (Ni-Cu/C) and Ni-Zn (Ni-Zn/C) bimetallic catalysts with different Ni:Cu(Zn) ratios were used to decompose Aroclor 1254, which is a commonly used commercial mixture of polychlorinated biphenyls. Characterization with scanning electron microscopy and energydispersive X-ray spectroscopy showed that the metals were uniformly distributed on the surfaces and inside the catalysts. After 30 min reaction over the Ni-Cu/C catalyst at a low temperature of 250 °C, the efficiencies of Hexa-CBs decomposition present in Aroclor 1254 exceeded 97%, which were higher than those achieved over Ni-Zn/C. These efficiencies increased with Cu content in Ni-Cu/C, and decreased with the amount of Zn in Ni-Zn/C. X-ray photoelectron spectra and X-ray absorption near-edge structure spectra of Ni-Cu/C and Ni-Zn/C before and after the reaction indicated that Ni and Cu were oxidized during the reaction. However, Zn showed no significant change, suggesting that Ni and Cu are the active components to promote reaction with Aroclor 1254, whereas Zn is only a spectator. The efficiencies of Aroclor 1254 decomposition over bimetallic catalysts were greater than those over monometallic catalysts, which was confirmed by density functional theory calculations.

Application of silica-supported Ir and Ir-M (M = Pt, Pd, Au) catalysts for low-temperature hydrodechlorination of tetrachloromethane

Herein, it is presented a catalytic system for gas-phase hydrodechlorination of tetrachloromethane at low temperature and atmospheric pressure, using iridium supported on silica as parent catalyst. Iridium electronic configuration is suitable to catalyse the hydrodechlorination reactions, however, it has been rarely used in this reaction to date. The catalytic abilities were significantly improved when a second transition metal was added. Catalysts' stability and selectivity to the desired products (i.e. C₁-C₄ hydrocarbons) improved compared to conventional activation in hydrogen when catalysts were activated shortly with microwave irradiation. Microwave irradiation of catalysts favourably influences the homogeneity of the metallic active phase, both in terms of the size of metal crystals and the homogeneity of bimetallic systems. Addition of platinum to the 'parent' iridium catalyst improved its catalytic properties and decreased deactivation. Fresh and spent catalysts were comprehensively characterized using several techniques (BET, CO-chemisorption, XRD, XPS, electron microscopy and mass spectrometry) to determine structure-activity relationships and potential causes for catalyst deactivation. No significant changes in crystalline size or bimetallic phase composition were observed for spent catalysts (with the exception of Ir-Pd catalysts which underwent bulk carbide during the reaction).

Fabrication of palladium-copper nanoparticles with controllable size and chemical composition

A series of Pd_xCu_100-x (x = 20, 40, 60, 80) particles with the sizes of 7-9 nm were fabricated by a two-step polyol reduction process, which differentiated the nucleation and growth steps of the nanoparticles. The primary reduction of Pd²⁺ by ethylene glycol at 393 K formed appreciable amounts of Pd⁰ nuclei, while the subsequent reduction at 473 K fully reduced the Pd²⁺ and Cu²⁺ species with the aid of the initially formed Pd nuclei seeds. Meanwhile, the releasing oleylamine, previously coordinated with metal cations, acted as the capping agent to segregate the nanoparticles. Both parameters simultaneously controlled the assembly kinetics of the bimetallic nanoparticles and resulted in uniform sizes and designed chemical compositions. Among them, the Pd₈₀Cu₂₀ nanoparticles showed quite promising activity and selectivity for the hydrogenation of nitrobenzene under mild conditions.

Synthesis of Supported Bimetal Catalysts using Galvanic Deposition Method

Supported bimetallic catalysts have been studied because of their enhanced catalytic properties due to metal-metal interactions compared with monometallic catalysts. We focused on galvanic deposition (GD) as a bimetallization method, which achieves well-defined metal-metal interfaces by exchanging heterogeneous metals with different ionisation tendencies. We have developed Ni@Ag/SiO₂ catalysts for CO oxidation, Co@Ru/Al₂ O₃ catalysts for automotive three-way reactions and Pd-Co/Al₂ O₃ catalysts for methane combustion by using the GD method. In all cases, the catalysts prepared by the GD method showed higher catalytic activity than the corresponding monometallic and bimetallic catalysts prepared by the conventional co-impregnation method. The GD method provides contact between noble and base metals to improve the electronic state, surface structure and reducibility of noble metals.