Transcondylar Odontoid Resection and Stabilization for Craniovertebral Degenerative Compression: 2-Dimensional Operative Video

Non-neoplastic craniovertebral junction lesions are well known with various etiologies.1,2 They are frequently associated with craniovertebral junction instability. Many require only stabilization for their management.2 However, when significant irreducible anterior compression is present, surgical decompression becomes necessary.2-4 The traditional decompression route is direct anterior, such as the transoral, transmaxillary, or endoscopic endonasal approaches with a separate posterior stabilization.1,2 The transcondylar approach offers a wide and direct exposure to the anterolateral foramen magnum and atlantoaxial space, allowing extensive decompression, total resection of the odontoid, and associated pannus, even with large lateral extension, as well as fusion in the same surgical setting.5 The surgical manipulation is parallel to the dural sac in the sagittal plane, which could be safer than perpendicular dissection.5 Understanding the regional anatomy allows safe exposure and transposition of the vertebral artery with the surrounding alveolar and venous plexus (suboccipital cavernous sinus).5-7 We present this technique's details in a case of a 72-yr-old female who presented with progressively worsening bilateral upper extremity weakness and significant anterior compression due to irreducible odontoid degenerative changes. We demonstrate the steps necessary to achieve adequate exposure and decompression. The patient agreed to the surgical intervention. Images at 2:46, 3:00, and 3:25 reused from Al-Mefty et al,5 by permission from JNSPG. Images at 9:28 from Symonds et al,3 by permission of Oxford University Press. Image at 2:15, © Ossama Al-Mefty, used with permission.

Predictive value of sagittal craniocervical roentgenographic parameters for HRQOL after craniocervical fusion

PURPOSE

Loss of "physiological" sagittal alignment following craniocervical fusion (CCF) for degenerative disease may be associated with loss of horizontal gaze, dysphagia and poor HRQOL. This study reports on sagittal craniocervical roentgenographic predictors of HRQOL (SF-36) in patients following uncomplicated CCF for fresh upper cervical traumatic (UCT) injuries.

METHODS

Twenty-two consecutive adult patients (group P) aged 50 ± 16 years, who had undergone CCF for fresh unstable C₁ and C₂AO/type UCT injuries, were evaluated 39 ± 12 months postoperatively with upright lateral cervical roentgenograms and SF-36as HRQOL measure. Physiological data for cervical sagittal alignment and SF-36 were taken from an age-matched control group (C) of 30 individuals aged 52 ± 12 years. Several commonly used sagittal cervical roentgenographic parameters were tested as potential predictors of the SF-36 domains in both groups. Roentgenographic predictors for each of the nine SF-domains were calculated using stepwise multilinear regression analysis (MLRA).

RESULTS

The roentgenographic predictors in patients included (1) the angle created by McGregor's line and the inferior surface of the axis (OC₂a) for physical function (PF, P = 0.049), role limitations due to physical health (RLPH, P = 0.004),role limitation due to emotional problems (RLEP, P = 0.004), emotional functioning (EF) (P = 0.012), social functioning (SF) (P = 0.028) and general health (GH, P = 0.041). (2) The angle formed between a horizontal line and the superior endplate of T₁-vertebra (T₁-slope) was predictor for SF (P = 0.017) and pain (P = 0.021), and (3) the angle between McGregor's line and the line that links the center of the C₁ anterior arch and the apex of cervical sagittal curvature (PIA) was predictor for health change (HC, P = 0.002).

CONCLUSIONS

This study showed that postoperative OC₂a, PIA and T1-slope safely predict HRQOL outcomes (SF-36) following CCF for fresh trauma. It seems theoretically that the adequate restoration of the upper cervical alignment including C1-C2 upper cervical lordosis (OC₂a) and PIA, in interaction with T1-slope, is important for postoperative HRQOL scores close to physiological values. The authors speculate that C0-C4 fusion restores horizontal gaze and allows for painful regain of pre-trauma quality of life. Spine surgeons should realign and stabilize the craniocervical junction taking in consideration these roentgenographic predictors.

Vascularized Bone Grafts for Spinal Fusion-Part 3: The Occiput

BACKGROUND

Obtaining successful arthrodesis at the craniocervical junction and atlantoaxial joint can be more challenging than in other segments of the cervical spine. This challenge stems from the relatively hypermobile joints between the occipital condyles, the motion that occurs at C1 and C2, as well as the paucity of dorsal bony surfaces for posterior arthrodesis. While multiple different techniques for spinal fixation in this region have been well described, there has been little investigation into auxiliary methods to improve fusion rates.

OBJECTIVE

To describe the use of an occipital bone graft to augment bony arthrodesis in the supraaxial cervical spine using a multidisciplinary approach.

METHODS

We review the technique for harvesting and placing a vascularized occipital bone graft in 2 patients undergoing revision surgery at the craniocervical junction.

RESULTS

The differentiation from nonvascularized bone graft, either allograft or autograft, to a bone graft using vascularized tissue is a key principle of this technique. It has been well established that vascularized bone heals and fuses in the spine better than structural autogenous grafts. However, the morbidity and added operative time of harvesting a vascularized flap, such as from the fibula or rib, precludes its utility in most degenerative spine surgeries.

CONCLUSION

By adapting the standard neurosurgical procedure for a suboccipital craniectomy and utilizing the tenets of flap-based reconstructive surgery to maintain the periosteal and muscular blood supply, we describe the feasibility of using a vascularized and pedicled occipital bone graft to augment instrumented upper cervical spinal fusion. The use of this vascularized bone graft may increase fusion rates in complex spine surgeries.

Prevalence of high-riding vertebral arteries and narrow C2 pedicles among Central-European population: a computed tomography-based study

High-riding vertebral artery (HRVA) and narrow C2 pedicles (C2P) pose a great risk of injuring the vessel during C2 pedicle or transarticular screw placement. Recent meta-analysis revealed a paucity of European studies regarding measurements and prevalence of these anatomical variants. Three hundred eighty-three consecutive cervical spine CT scans with 766 potential screw insertion sites were analyzed independently by two trained observers. C2 internal height (C2InH), C2 isthmus height (C2IsH), and C2P width were measured. Kappa statistics for inter- and intraobserver reliability as well as for inter-software agreement were calculated. HRVA was defined as C2IsH of ≤ 5 mm and/or C2InH of ≤ 2 mm. Narrow C2P was defined as C2P width ≤ 4 mm. STROBE checklist was followed. At least 1 HRVA was found in 25,3% (95% CI 21,1–29,8) of patients (16,7% of potential sites). At least 1 narrow C2P was seen in 36,8% (95% CI 32,1–41,7) of patients (23,8% of potential sites). Among those with HRVA, unilateral HRVA was present in 68,0% (95% CI 58,4–77,0), whereas bilateral HRVA in 32,0% (95% CI 23,0–41,6). No difference in terms of laterality (right or left) was seen neither for HRVA nor narrow C2P. Significant differences were found between females and males for all measurements. Each parameter showed either good or excellent inter- or intraobserver, and inter-software agreement coefficients. HRVA and narrow C2P are common findings in Central-European population and should be appreciated at the planning stage before craniocervical instrumentation. Measurements can be consistently reproduced by various observers at varying intervals using different software.

The mandible-C2 angle: a new radiographic assessment of occipitocervical alignment

BACKGROUND CONTEXT

Occipitocervical fusion is a rare and often challenging surgical procedure. Significant morbidity can result if care is not taken to achieve physiologic alignment. This is especially true for patients needing occipitocervical fusion in the setting of trauma where preoperative alignment is unknown.

PURPOSE

To assess the radiographic angles normally subtended between the C2 body and the mandible ramus, in a series of patients with neutral physiologic alignment and no pathology, and to assess its validity as a possible intraoperative radiographic tool to determine a neutral craniocervical alignment.

DESIGN

Validation and reliability study of radiographic parameters.

PATIENT SAMPLE

Hundred lateral, neutral, cervical radiographs from patients with "normal" radiographic findings.

OUTCOME MEASURES

Radiographic parameters of occipital-cervical alignment with assessment of reliability and correlation in data.

METHODS

One hundred neutral lateral cervical spine radiographs in the upright position of patients with no complaints or known pathology were obtained from two medical clinics between December of 2014 and January of 2017. Three physicians, at different levels of spine surgery training, took measurements of radiographic parameters. The new technique used four different angles measured between the C2-body/dens complex and the mandibular ramus (anterior/posterior C2 body and anterior/posterior mandible lines angles), and compared these with the Occipito-C2 angle, which is a validated assessment of occipitocervical alignment. Statistical analysis was performed to assess correlation in data and measure reproducibility.

RESULTS

Between the three reviewers, the mean±standard deviation were 18.0°±6.5° for Occipito-C2 angle (O-C2A), -4.2°±5.4° for anterior C2-body/anterior mandible line angle (AB/AM), -4.2°±5.9° for anterior C2-body/posterior mandible line angle (AB/PM), 5.1°±5.8° for posterior C2 body/anterior mandible line angle (PB/AM) and 5.6°±6.2° for posterior C2 body/ posterior mandible line angle (PB/PM). Overall the measurements obtained were correlative with an appropriate range for the standard deviation. Mean intraclass correlation coefficient were 0.889 for O-C2A, 0.795 for AB/AM, 0.859 for AB/PM, 0.876 for PB/AM, and 0.750 for PB/PM, showing high interobserver reliability for all the radiographic measures. Across the five techniques, 87%-92% of measurements fell within 10° of the median, 76%-83% fell within 7.5°, and 55%-66% within 5°.

CONCLUSIONS

The mandible-C2 angle offers a reproducible alternative to the validated O-C2A technique for determining appropriate intraoperative occipitocervical alignment, which may be especially useful when preoperative radiographic alignment is unknown, such as occurs with trauma patients, with the goal of decreasing alignment-related complications in the setting of occipitocervical stabilization.

Risk of the high-riding variant of vertebral arteries at C2 is increased over twofold in rheumatoid arthritis: a meta-analysis

Rheumatoid arthritis (RA) might lead to atlantoaxial instability requiring transpedicular or transarticular fusion. High-riding vertebral artery (HRVA) puts patients at risk of injuring the vessel. RA is hypothesized to increase a risk of HRVA. However, to date, no relative risk (RR) has been calculated in order to quantitatively determine a true impact of RA as its risk factor. To the best of our knowledge, this is the first attempt to do so. All major databases were scanned for cohort studies combining words "rheumatoid arthritis" and "high-riding vertebral artery" or synonyms. RA patients were qualified into the exposed group (group A), whereas non-RA subjects into the unexposed group (group B). Risk of bias was explored by means of Newcastle-Ottawa Scale. MOOSE checklist was followed to ensure correct structure. Fixed-effects model (inverse variance) was employed. Four studies with a total of 308 subjects were included in meta-analysis. One hundred twenty-five subjects were in group A; 183 subjects were in group B. Mean age in group A was 62,1 years, whereas in group B 59,9 years. The highest risk of bias regarded "comparability" domain, whereas the lowest pertained to "selection" domain. The mean relative risk of HRVA in group A (RA) as compared with group B (non-RA) was as follows: RR = 2,11 (95% CI 1,47-3,05), I² = 15,19%, Cochrane Q = 3,54 with overall estimate significance of p < 0,001. Rheumatoid arthritis is associated with over twofold risk of developing HRVA, and therefore, vertebral arteries should be meticulously examined preoperatively before performing craniocervical fusion in every RA patient.

Prevalence of High-Riding Vertebral Artery: A Meta-Analysis of the Anatomical Variant Affecting Choice of Craniocervical Fusion Method and Its Outcome

OBJECTIVE

A high-riding vertebral artery (HRVA) has been defined as a C2 isthmus height of ≤5 mm and/or internal height of ≤2 mm measured 3 mm lateral to the border of the spinal canal. Its reported prevalence has varied widely. If overlooked during the approach for craniocervical fusion, injury to the vertebral arteries can occur, affecting the outcome. The present meta-analysis aimed to provide the pooled prevalence of HRVAs.

METHODS

A comprehensive database search was conducted by 3 of us. Peer-reviewed studies that had followed the strict definition for HRVAs and had reported its prevalence were included. The risk of bias was assessed using the anatomical quality assessment tool. The PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) guidelines were followed. The pooled prevalence was calculated using a random effects model.

RESULTS

The data from 20 studies with 3126 subjects (7496 sides) were analyzed. The overall pooled prevalence of ≥1 HRVA was 25.3% (95% confidence interval [CI], 19.6%-31.5%). The prevalence in those without the most important confounding factor, rheumatoid arthritis (RA), was 20.9% (95% CI, 16.5%-25.8%). Patients with RA had a prevalence of 42.9% (95% CI, 23.8%-63.1%). The difference between the non-RA and RA groups was statistically significant (P < 0.001, test of homogeneity, χ²). No geographical differences were noted (P = 0.20, test of homogeneity, χ²). Among those with HRVA, unilateral HRVA was present in 70.3% (95% CI, 65.2%-75.2%) and bilateral in 29.7% (95% CI, 24.8%-34.8%). No left or right side predilection was found (left, 50.8%; 95% CI, 33.8%-67.6%; right, 49.2%; 95% CI, 32.4%-66.2%).

CONCLUSIONS

Craniocervical fusion should be preceded by examination of the vertebral arteries at the level of C2 because the presence of HRVAs is common and might preclude the safe insertion of transarticular or transpedicular screws.

Computed Tomography-Based Occipital Condyle Morphometry in an Indian Population to Assess the Feasibility of Condylar Screws for Occipitocervical Fusion

Study Design

A retrospective computed tomography (CT)-based morphometric study of 82 occipital condyles in the Indian population, focusing on critical morphometric dimensions with relation to placing condylar screws.

Purpose

This study focused on determining the feasibility of placing occipital condylar screws in an Indian population using CT anatomical morphometric data.

Overview of Literature

The occipital condylar screw is a novel technique being explored as one of the options in occipitocervical stabilization. Sex and ethnic variations in anatomical structures may restrict the feasibility of this technique in some populations. To the best of our knowledge, there are no CT-based data on an Indian population that assess the feasibility of occipital condylar screws.

Methods

We measured the dimensions of 82 occipital condyles in 41 adults on coronal, sagittal, and axial reconstructed CT images. The differences were noted between the right and left sides and also between males and females. Statistical analysis was performed using the t-test, with a p-value of <0.05 considered significant.

Results

Mean sagittal length and height were 17.2±1.7 mm and 9.1±1.5 mm, respectively. Mean condylar angle/screw angle was 38.0°±5.5° from midline, with mean condylar length and width of 19.6±2.6 mm and 9.5±1.0 mm, respectively. Average coronal height on the anterior and posterior hypoglossal canal was 10.8±1.4 mm and 9.0±1.4 mm, respectively. The values in females were significantly lower than those in males, except for screw angle and condylar width. Based on Lin et al.'s proposed criteria, eight of 82 condyles were not suitable for condylar screws.

Conclusions

Preliminary CT morphometry data of the occipital condyle shows that condylar screws are anatomically feasible in a large portion of the Indian population. However, because a small number of population may not be suitable for this technique, meticulous study of preoperative anatomy using detailed CT data is advised.

Radiological evolution of peri-odontoid pannus in a patient with Chiari I malformation: a case-based review

INTRODUCTION

The Chiari I malformation (CIM) is commonly encountered by neurosurgeons and can have different etiologies and clinical presentations.

CASE REPORT

We report a CIM patient who presented with symptoms of ventral brain stem compression and was found to have a large peri-odontoid pannus. Posterior fossa decompression was performed with a planned second-stage odontoidectomy. However, at the 6-month follow-up, postoperative images demonstrated a mostly resolved pannus and improvement of the brain stem compression symptoms, and the patient progressed uneventfully without the need for odontoidectomy.

CONCLUSIONS

This case illustrates the resolution of a significant and symptomatic peri-odontoid pannus in a patient with CIM without craniocervical fusion or odontoidectomy. Such a case indicates that not all peri-odontoid pannus formations in CIM patients are due to hypermobility at the craniocervical junction.