NAILING INTERTROCHANTERIC FRACTURES IN GERIATRIC POPULATION: DO WE KNOW IT ALL?

INTRODUCTION AND OBJECTIVES

Pertrochanteric fractures constitute an important part of the daily activity of the orthopaedic surgeon. The aim of this study was to carry out an analysis of pre-, intra- and post-operative radiographic parameters and to analyze the results of stable and unstable intertrochanteric fractures treated with short nails with dynamic distal locking.

MATERIALS AND METHODS

Retrospective study in our center, between the years 2017-2021 of patients over 65 years of age with pertrochanteric fracture. We included 272 patients treated with Gamma3 Nail (Stryker®) with dynamic distal locking. As variables, we recorded: age, medical comorbidities, fracture pattern according to AO/OTA, osteopenia according to Singh's classification, preoperative (such as diaphyseal extension), intraoperative (such as tip to the apex or medial cortical support) and postoperative radiographic parameters (such as time to consolidation or loss of reduction), pre- and postoperative Barthel, quality of life and complications and reinterventions, such as non-union or cut-out.

RESULTS

The mean age was 83.28 years (65-102). 204 cases were women (75%). The average follow-up was 18.2 months (12-24). The distribution according to AO/OTA classification was 85.7% 31.A1; 12.5% 31.A2; 1.9% 31.A3. Radiographic consolidation was obtained in 97.4% of cases. Tip to apex distance was less than 25mm in 95.6% of cases. Medial cortical support was positive or neutral in 88.6% of cases. Sixty cases (22.1%) of screw back-out were recorded. Eight reinterventions (2.9%) were performed, corresponding to three cut-outs (1.1%), three nonunions (1.1%), one avascular necrosis (0.4%) and one secondary hip osteoarthritis (0.4%).

CONCLUSIONS

Short nail with dynamic distal locking offers good clinical, radiological and functional results in all types of AO/OTA patterns, without increasing the complication rate, as long as there is an appropriate tip-to-the-apex distance and good medial cortical support.

Positive buttress reduction in femoral neck fractures: a literature review

BACKGROUND

Femoral neck fractures (FNFs) in young adults are usually caused by high-energy trauma, and their treatment remains a challenging issue for orthopedic surgeons. The quality of reduction is considered an important factor in improving the poor prognosis of patients with FNFs. In recent years, positive buttress closed reduction technique has received widespread attention in the treatment of FNFs. This comprehensive literature review is designed to encapsulate the impacts of both non-anatomic and anatomic reduction on the biomechanical stability, clinical outcomes, and postoperative complications in the management of FNFs, conjecture the efficacy of positively braced reduction techniques and provide a thorough summarization of the clinical outcomes.

METHODS

In this literature review, we have examined all clinical and biomechanical studies related to the treatment of FNFs using non-anatomical reduction or positive and negative buttress reduction. PubMed, Web of Science, Google Scholar and Embase Library databases were searched systematically for studies published before September 1, 2023. Published literature on fracture reduction techniques for treating FNFs was reviewed. In addition, we evaluated the included literature using the MINORs tool.

RESULTS

Although the "arch bridge" structure formed by the positive buttress reduction technique improved the support to the cortical bone and provided a more stable biomechanical structure, no significant differences were noted in the clinical efficacy and incidence of postoperative complications between the positive buttress reduction and anatomical reduction.

CONCLUSION

Positive buttress reduction is an effective treatment method for young patients with FNFs. When facing difficult-to-reduce FNF, positive buttress reduction should be considered first, followed by anatomical reduction. However, negative buttress reduction should be avoided.

Comparison of patient positions without traction table for proximal femoral nailing: Supine, semilithotomy and lateral decubitus positions

BACKGROUND

Femur intertrochanteric fractures are performed commonly in a supine position with a traction table. There is a challenge in obtaining traction tables, especially in low- and middle-income countries. However, there is still a debate on which position should be preferred if the traction table cannot be obtained.

METHODS

A total of 123 patients who were treated for femur intertrochanteric fracture (AO/OTA A1 or A2) using cephalomedullary nail (CN) were retrospectively analyzed. All three positions without traction table (supine:25 patients, semilithotomy:36 patients and lateral decubitus:62 patients) were compared according to preparation time, surgical time, Tip-Apex distance (TAD), zones of lag screw placement, collodiaphyseal angle (CDA), CDA difference (∆ CDA), postoperative posterior sag, medial cortical support and Baumgardner reduction quality criteria.

RESULTS

The preparation time was longer in the semilithotomy group, and surgery time was longer in the supine position group. There was no difference according to total time, surgical time, TAD, CDA difference (∆ CDA), postoperative posterior sag, medial cortical support and Baumgardner reduction quality criteria. Target lag screw placement is superior in supine and semilithotomy group than lateral decubitus.

CONCLUSION

This study concluded that there was a difference in preparation time, surgery time and optimal lag screw placement in the lateral plane between groups. The surgeon may prefer all three methods according to patient benefit and surgeon familiarity.

The use of ultrasound for monitoring reduction and ulnar nerve subluxation in pediatric humeral supracondylar fractures

BACKGROUND

Traditional treatment for displaced humeral supracondylar fractures (SCFs) in children involves closed reduction (CR) under fluoroscopic guidance, percutaneous pinning, and immobilization with a long-arm cast. This study aims to explore the viability of using radiation-free ultrasound (US) for guiding CR and tracking ulnar nerve dynamics during medial pinning, contrasting the US method with the conventional cross pinning technique.

MATERIALS AND METHODS

We assessed 70 children with acute displaced SCFs. The US group (n = 30) underwent US-guided reduction, whereas the traditional group (n = 40) underwent fluoroscopy-guided reduction. Both groups received percutaneous cross pinning and subsequent cast immobilization. Postoperative outcomes were compared between the two methods after a 6-month follow-up. In the US group, ultrasonography assessed fracture displacement distances before and after CR. The angle at which the ulnar nerve relocated to the cubital tunnel during elbow extension was documented using real-time US monitoring during medial pinning.

RESULTS

The US group demonstrated improved reduction accuracy, increased range of motion, superior restoration of both Baumann and Humeroulnar angles, and a decreased incidence of malunions compared to the traditional group (all p < 0.05). The ultrasonographic measurement of fracture displacement was comparable with that of fluoroscopy (intraclass correlation coefficient > 0.90). In the US group, no ulnar nerve injury was noted, compared to 2.5 % in the traditional group, and real-time US observations revealed ulnar nerve hypermobility, with 53.3 % of patients exhibiting anterior ulnar nerve subluxation at 120° elbow flexion, 40 % at 90°, 16.7 % at 60°, and none at 30° flexion.

CONCLUSION

Ultrasound is as reliable as fluoroscopy for evaluating fracture reductions. The use of intra-operative ultrasound significantly improves reduction accuracy and radiographic outcomes while reducing the risk of ulnar nerve injury.

The remnant axial cortical length of the proximal femur in pertrochanteric fractures: a three-dimensional computed tomography study and its clinical implications

BACKGROUND

Cortical buttress are important factors for postoperative stable reconstruction of per/inter-trochanteric fractures. The study aimed to measure the remnant axial cortical length (RACL) of the proximal circumference of the femur, and to determine which part of the RACL can be used reliably to postoperatively sustain the head-neck fragment as a cortical support pattern.

METHODS

Eighty patients with trochanteric hip fractures admitted from January 2015 to January 2016 were included in a retrospective study. Their pre-operative computed tomography (CT) images were used to form 3D-CT reconstructions via Mimics software. After simulated rotation and movement for fracture reduction, the RACL, its three component parts-namely, the remnant anterior cortex (RAC), remnant lateral cortex (RLC), and remnant posterior cortex (RPC) -the γ angle between the anterior and posterior cortex, and the Hsu's lateral wall thickness (LWT) were evaluated.

RESULTS

Patients with an A1 fracture (21/80) had a longer RACL (88.8 ± 15.8 mm) than those with an A2 fracture (60.0 ± 11.9 mm; P < 0.01). The RAC, RLC, and RPC of the RACL in A1 fractures were also significantly longer than those in A2 fractures (P < 0.001). However, the most significant difference among the three components of the RACL was in the RPC, which was 27.3 ± 7.8 mm in A1 fractures and 9.2 ± 6.6 mm in A2 fractures. In addition, the coefficient of variation of the RAC was only 20.0%, while that of the RPC was 75.5%. The average γ angle in A1 fractures was 16.2 ± 13.1°, which was significantly smaller than that in A2 fractures, which was 40.3 ± 14.5° (P < 0.001). There was a significant statistical difference in the LWT between A1 and A2 fractures (P < 0.001). There were significant differences in the RACL, RAC, RLC, RPC, γ angle, and LWT among the five subtypes (P < 0.001).

CONCLUSIONS

The RAC is relatively stable in pertrochanteric fractures. Fracture reduction through a RAC buttress may help to enhance the postoperative stable reconstruction of per/inter-trochanteric fractures and make possible good mechanical support for fracture healing.

[Possibilities and limits of intraoperative 2D imaging in trauma surgery]

BACKGROUND

The two-dimensional (2D) imaging represents an essential and cost-effective component of intraoperative position control in fracture stabilization, even in the era of new three-dimensional (3D) imaging capabilities.

OBJECTIVE

The aim of the present study, in addition to a current literature review, was to examine whether the intraoperative use of 2D images leads to a quality of fracture reduction comparable to postoperative computed tomographic (CT) analysis including 3D reconstructions.

MATERIAL AND METHODS

A comparative retrospective analysis of intraoperative 2D and postoperative 3D image data was performed on 21 acetabular fractures stabilized via a pararectus approach according to an established protocol using the Matta criteria.

RESULTS

The assessment of fracture reduction in intraoperative fluoroscopy compared with postoperative CT revealed a difference only in one case with respect to the categorization of the joint step reduction in the main loading zone.

CONCLUSION

In the intraoperative use of 2D imaging for fracture treatment it is important to select the correct adjustment planes taking the anatomical conditions into account in order to achieve optimum assessability. In this way, the reduction result can be adequately displayed in fluoroscopy and is also comparable to the postoperative CT control. In addition, depending on the findings, optional intraoperative dynamic fluoroscopic assessment can have a direct influence on the further surgical procedure.

Indirect Decompression of Osteoporotic Vertebral Compression Fracture Using Intraoperative Motor Evoked Potential Monitoring-Guided Ligamentotaxis

Osteoporotic vertebral compression fractures have become common in aging societies and can lead to a decreased quality of life with severe back pain and neurological deficits. Traditional direct decompression and stabilization surgeries can produce sufficient decompression and provide good results. However, after surgical treatment, some elderly patients with numerous chronic diseases often experience severe postoperative complications owing to the long surgery duration and massive bleeding. Therefore, to prevent perioperative morbidity, other surgical methods that simplify the surgical process and reduce the operation time are required. Herein, we describe a case of indirect decompression using ligamentotaxis and sequential anabolic agents. To examine their effectiveness during surgery, we monitored intraoperative motor-evoked potentials. The patient's neurological symptoms improved postoperatively. After the operation, the anabolic agent "romosozumab" was injected monthly to treat osteoporosis, prevent additional fractures, and accelerate posterolateral fusion. On serial follow-up, the anterior body height of the fractured vertebra improved significantly, demonstrating the importance of osteoporosis treatment using anabolic agents. Indirect decompression surgery may have early effects, whereas sequential anabolic agent use may consolidate the long-term effects of surgical treatment.

[Review of closed reduction techniques for femoral neck fracture]

For patients with femoral neck fractures who plan to undergo internal fixation, satisfied alignment of fracture ends is an important prerequisite for internal fixation stability and fracture healing. There are many reports on the reduction methods of displaced femoral neck fractures, which can be summarized into three categories:First, the solely longitudinal traction of lower limbs, supplemented by other manipulations such as rotation and compression; Second, the resultant force formed by the longitudinal traction of lower limbs and the lateral traction;the third is accomplished by vertical traction in the axis of femur with hip joint flexed. Each reduction method has its own advantages, but no single method can be applied to all fracture displacement. In this paper, some classical reduction techniques in the literatures are briefly reviewed. It is hoped that clinicians will not be limited to a certain reduction method, they should analyze the injury mechanism and fracture displacement process according to the morphology features and flexibly select targeted reduction methods to improve the success rate of closed reduction of femoral neck fracture.

Simplified Method for Reduction of Displaced Condylar Head Fracture Using a Monocortical Screw

Background

Condylar head fractures is difficult to treat because of medial displacement caused by muscle pull and limited access to visualize the proximal segment and secure them back to anatomic position. A novel technique is proposed to overcome the difficulties and ease the task of a surgeon.

Purpose

The main goal in Open reduction and internal fixation is to achieve anatomical position and establish occlusion, a task possible only after securing the segment back into place. Over decades, many authors have described various techniques to ease the task yet surgeons are forced to treat cases using closed technique which adds limitation to the rehabilitation of stomatognathic system for a prolonged time.

Methods and Materials

Self holding screw driver, 1.5x10mm monocortical screws and drill bit. Using any preauricular access incision, dissection is proceeded anteromedially and the medial segment is identified. A drill hole is made with 1.2 mm diameter drill with counter using periosteal retractor, monocortical screw fixed and segment secured using a self-holding driver and lateralized after increasing the joint space thus achieving the original retromandibular height.

Results

The treatment outcomes are better achieved with ease to surgeon and with minimal armamentarium without any special needs per se.

Conclusion

The technique proposed is novel and can help achieve desired outcomes even in hands of budding surgeon with minimal time and efforts invested.

[Osteosynthesis of geriatric acetabular fractures]

The aim of the treatment of acetabular fractures is principally an anatomical reconstruction of the joint surface to avoid posttraumatic arthritis. The increasing number of geriatric patients with acetabular fractures of the anterior column type resulting from simple falls on the side and substantial patient-related inherited comorbidities, represent particular challenges for the surgical approach and osteosynthesis due to the osteoporotic bone quality. Due to the establishment of minimally invasive lateral pelvic accesses to the acetabulum and the adaptation of the osteosynthesis technique and material to these approaches, it appears that even in very old patients with acetabular fractures mobility can be better and more rapidly restored and sequelae caused by immobility can be prevented.

Bone collision detection method for robot assisted fracture reduction based on vibration excitation

BACKGROUND AND OBJECTIVE

In the process of robotic fracture reduction, there is a risk of unintended collision of broken bones, which is not conducive to ensuring the safety of the reduction system. In order to solve this problem, this paper proposed a vibration-based collision detection method for fracture reduction process.

METHODS

Based on the two degree-of-freedom vibration response model, the factors affecting the respond of the vibration, including the excitation voltage, the clamping length at the proximal and distal ends, the mass and tensile force of the soft tissue, were obtained. The effects of these factors on the vibration transfer performance of broken bones and soft tissue were investigated by single factor experiments.

RESULTS

The results showed that, in terms of peak value, the increase of excitation voltage would make the vibration amplitude increase linearly, and the increase of soft tissue mass and tension increased the vibration transmission capacity of soft tissue in the frequency range of 500-1000 Hz. In terms of peak frequency, the clamping length at the distal end had the greatest influence, which reached 74 Hz, followed by 45 Hz at the proximal end. While the influence of other factors was little. According to single factor experiments, the excitation frequency in the verification experiments was determined as 677 Hz. Under the vibration interference with the acceleration amplitude of 1.2 G, this method achieved correct detection.

CONCLUSION

This research developed a broken bone collision detection method based on vibration excitation. The method can correctly detect the collision of broken bones with strong anti-interference ability. It is of great significance to improve the safety of fracture reduction process.

Robot-patient registration for optical tracker-free robotic fracture reduction surgery

BACKGROUND AND OBJECTIVE

Image-guided robotic surgery for fracture reduction is a medical procedure in which surgeons control a surgical robot to align the fractured bones by using a navigation system that shows the rotation and distance of bone movement. In such robotic surgeries, it is necessary to estimate the relationship between the robot and patient (bone), a task known as robot-patient registration, to realize the navigation. Through the registration, a fracture state in real-world can be simulated in virtual space of the navigation system.

METHODS

This paper proposes an approach to realize robot-patient registration for an optical-tracker-free robotic fracture-reduction system. Instead of the optical tracker which is a three-dimensional position localizer, X-ray images are used to realize the robot-patient registration, combining the relationship of both the robot and patient with regards to C-arm. The proposed method consists of two steps of registration, where initial registration is followed by refined registration which adopts particle swarm optimization with the minimum cross-reprojection error based on bidirectional X-ray images. To address the unrecognizable features due to interference between the robot and bone, we also developed attachable robot features. The allocated robot features could be clearly extracted from the X-ray images, and precise registration could be realized through the particle swarm optimization.

RESULTS

The proposed method was evaluated in phantom and ex-vivo experiments involving a caprine cadaver. For the phantom experiments, the average translational and rotational errors were 1.88 mm and 2.45°, respectively, and the corresponding errors in the ex vivo experiments were 2.64 mm and 3.32° The results demonstrated the effectiveness of the proposed robot-patient registration.

CONCLUSIONS

The proposed method enable to estimate the three-dimensional relationship between fractured bones in real-world by using only two-dimensional images, and the relationship is accurately simulated in virtual reality for the navigation. Therefore, a reduction procedure for successful treatment of bone fractures in image-guided robotic surgery can be expected with the aid of the proposed registration method.

Risk factors for insufficient reduction after short-segment posterior fixation for thoracolumbar burst fractures: Does the interval from injury onset to surgery affect reduction of fractured vertebrae?

BACKGROUND

Many surgeons have encountered patients who could not immediately undergo surgery to treat spinal fractures because they had associated injuries and/or because a complete diagnosis was delayed. For such patients, practitioners might assume that delays could mean that the eventual reduction would be insufficient. However, no report covered risk factors for insufficient reduction of fractured vertebra including duration from injury onset to surgery. The purpose of this study is to investigate the risk factors for insufficient reduction after short-segment fixation of thoracolumbar burst fractures.

METHODS

Our multicenter study included 253 patients who sustained a single thoracolumbar burst fracture and underwent short-segment fixation. We measured the local vertebral body angle (VBA) on roentgenograms, before and after surgery, and then calculated the reduction angle and reduction rate of the fractured vertebra by using the following formula: [Formula: see text] A multiple logistical regression analysis was performed to identify risk factors for insufficient reduction. The factors that we evaluated were age, gender, affected spine level, time elapsed from injury to surgery, inclusion of vertebroplasty with surgery, load-sharing score (LSS), AO classification (type A or B), preoperative VBA, and the ratio of canal compromise before surgery.

RESULTS

There were 140 male and 113 female patients, with an average age of 43 years, and the mean time elapsed between injury and surgery was 3.8 days. The mean reduction angle was 12°, and the mean reduction rate was 76%. The mean LSS was 6.4 points. Multiple linear regression analysis revealed that a higher LSS, a larger preoperative VBA, a younger age, and being female disposed patients to having a larger reduction angle and reduction rate. The time elapsed from injury to surgery had no relation to the quality of fracture reduction in the acute period.

CONCLUSIONS

Our findings indicate that if there is no neurologic deficit, we might not need to hurry surgical reduction of fractured vertebrae in the acute phase.

Adhesives for treatment of bone fractures: A review of the state-of-the art

Treatment of fractures remains challenging and carries a high economical burden to both patients and society. In order to prevent some of the complications, the use of bone adhesives has been proposed, but up to date, bone adhesives are not part of the current clinical practice. Early results of use of bone cements and bone glues are promising, focusing in the areas of highly fragmented fractures, fixation of long bone fractures, filling bone voids and defects, promoting osseointegration, preventing non-union while maintaining the reduction of fracture fixation. This review aims to describe the state-of-the-art of the development, properties and use of adhesives in fracture treatment.

Safety of ketamine for reducing fractures in a pediatric emergency department

OBJECTIVES

Ketamine is one of the most widely used drugs for analgesia and sedation when reducing fractures in pediatric emergency departments (EDs). We aimed to analyze the safety of intravenous (IV) ketamine when administered by physicians who are not anesthesiologists.

MATERIAL AND METHODS

Prospective observational study of adverse events (AEs) related to pediatric ED specialists' use of analgesia and sedation when reducing fractures in children under the age of 14 years between 2011 and 2019. Multivariate analysis was used to identify independent risk factors for AEs.

RESULTS

We analyzed 1509 cases of IV ketamine administration for analgesia and sedation. The median age of patients was 8 years (interquartile range, 5-11 years). All had American Society of Anesthesiologists risk classifications of 1 or 2 and Mallampati scores of I or II. Prior to the procedure, 937 children (62.1%) had been administered an opioid analgesic. AEs were observed in 201 children (13.3%; 95% CI, 11.7%-15.1%); 71 experienced respiratory complications (4.7%; 95% CI, 3.2%-5.3%). No child required intubation, other advanced resuscitation maneuvers, or hospital admission because of a ketamine-related AE. Age was the only independent risk factor for developing an AE. The odds ratio (OR) for any type of AE in children aged 8 years or older was 1.9 (95% CI, 1.4-2.6). The OR for respiratory AEs in children aged 6 years or older was 2.6 (95% CI, 1.3-5.6). Opioid administration did not increase risk for AEs.

CONCLUSION

Pediatric emergency physicians who are not anesthesiologists can safely administer IV ketamine for reducing fractures. Prior use of opioids is not associated with greater risk for respiratory AEs after ketamine use.

Staged correction trajectory with hexapod external fixator for the satisfactory reduction of long bone shaft fracture

Backgroud

When the reduction of long bone shaft fracture fragments is performed by a hexapod external fixator, the collision and interference between bony ends often results in an incomplete reduction and a time-consuming procedure. The purpose of this study was to present and determine the clinical effectiveness of staged correction trajectory with hexapod external fixator in the reduction of a long bone shaft fracture.

Methods

A total of 57 patients with tibial shaft fractures treated by hexapod external fixator were retrospectively analyzed from June 2016 to February 2020. Thirty-one cases (Group I) underwent a conventional one-step reduction trajectory from June 2016 to July 2018. Starting in September 2018, the other twenty-six patients (Group II) underwent staged correction trajectory (three key points reduction trajectory of “distraction-derotation-reduction”). The demographic data, residual deformities before and after correction, number of repeated X-rays after the first postoperative X-ray, duration of deformity correction process, and external fixation time were analyzed. Johner-Wruhs criteria were used to evaluate the final clinical outcomes.

Results

All the 57 patients achieved satisfactory fracture reduction and bone union. There were no significant differences between the two groups in demographic data, residual deformities before and after correction, external fixation time, and final clinical outcomes (p > 0.05). The average number of repeated X-rays after the first postoperative X-ray and mean duration of deformity correction process in Group II (1.3 times, 2.9 days) were all less than those in Group I (2.3 times, 5.1 days) (p < 0.05).

Conclusion

Compared with the conventional one-step reduction trajectory, there is no differences in final clinical outcomes, but the staged correction trajectory provides less repeated X-rays and shorter reduction process duration.

Quality of fracture reduction is associated with patient survival at one year, but not 30 days, following trochanteric hip fracture fixation. A retrospective cohort study

INTRODUCTION

Few studies have been performed to evaluate the association between technical surgical factors and patient outcomes following hip fracture surgery. We performed a retrospective cohort study of elderly patients who had undergone fixation of trochanteric hip fractures using a sliding hip screw (SHS), with the aim of establishing whether there was a correlation between quality of fracture reduction and mortality at 30 days and one year.

PATIENTS AND METHODS

A retrospective cohort study was designed. Inclusion criteria were trochanteric (AO 31A1 or 31A2) fractures in patients aged ≥ 65 years, presenting <3 days after injury and fixed using an SHS. Fracture reduction was classified using the Baumgaertner Reduction Quality Criteria (BRQC). A validated predictor of mortality following hip fracture was used to stratify for confounding variables that might affect mortality. Multivariate logistic regression was used to explore the association between fracture reduction and mortality.

RESULTS

329 patients were identified (mean age 86, 27% male). 57% had a good reduction, 39% had a fair reduction and 4% had a poor reduction. As reduction grade deteriorated, predicted mortality increased (good reduction: 7.3%; fair reduction: 8.4%; poor reduction: 15.5%). Without adjustment for predicted mortality, there was a significant correlation between decreasing reduction grade and mortality at both time points (30-day: odds ratio 1.95, p = 0.049; one year: odds ratio 1.86, p = 0.003). When adjusted for predicted mortality, only one year mortality remained significant (30 day: odds ratio 1.61, p = 0.173; one year: odds ratio 1.62, p = 0.037).

CONCLUSION

Some, but not all, of the association between fracture reduction and mortality can be explained by predetermined predictors of a poor outcome. There remains, however, a correlation between poor fracture reduction and mortality at one year. Every effort must be made to achieve an anatomical reduction for these injuries, and trainees must be instructed in methods to achieve this.

The clinical outcome of the reduction of the patellar inferior pole fracture with wire cerclage through a generated bone hole, in combination with patellar concentrator: a retrospective comparative study

OBJECTIVE

The patellar inferior pole fracture is typically comminuted. Hence, achieving firm fixation and early activity is highly challenging. In this article, we employed the method of wire cerclage through a generated bone hole to reduce the fracture. Our objective was to compare the clinical efficacy of patellar concentrator alone with a combination of cerclage and patellar concentrator in the treatment of patellar inferior pole fracture.

METHODS

We conducted a retrospective review of patients with patellar inferior pole fractures, who underwent patellar concentrator fixation only (the control group) or cerclage combined with patellar concentrator fixation (the experimental group), performed by a single surgeon, between July 2015 and October 2019. Our analysis included surgical indexes like7 aspects (fracture gap after operation, operation time, intra-operative blood loss, intra-operative number of C-arm fluoroscopies conducted, Insall-Salvati ratio calculated immediately after operation, initial range of motion on the 7th day after operation, and fracture healing time), as well as the Bostman score and complications recorded on 1-, 3-, 6-, and 12-month follow up post operation.

RESULTS

A total of 94 patients with patellar inferior pole fracture and a minimum 1-year follow up were recruited. Following operation, the control group had 33 (71.74%) patients with a fracture gap of 0-2 mm and 13 (28.26%) patients with a fracture gap greater than 2 mm (P = 0.002). Conversely, the experimental group had 46 (95.83%) patients with a fracture gap of 0-2 mm and 2 (4.17%) patients with a fracture gap greater than 2 mm (P = 0.002). Compared to the control group, the experimental group did not experience enhanced operation time or intra-operative blood loss (P = 0.811, P = 0.823). The Insall-Salvati ratio and initial range of motion in the experimental group were larger than the control group (P = 0.037, P = 0.000). Alternately, the number of intra-operative C-arm fluoroscopies conducted and fracture healing time of the experimental group were considerably less than the control group (P = 0.003, P = 0.000). Moreover, at 1-, 3-, 6-, and 12-month follow ups after operation, the Bostman scores of the experimental group were remarkably higher than the control group (P < 0.05). At 12 months post operation, 23 cases (50%) were classified as excellent, 22 cases (47.83%) were good, and 1 case (2.17%) was poor in the control group (P = 0.005). In the meantime, in the experimental group, 38 cases (79.17%) were deemed as excellent and 10 cases (20.83%) were good (P = 0.005). Lastly, complications were detected in 3 cases (6.52%; 1 case of internal fixation loss, 2 cases of hematoma) within the control group, and in 1 case(2.08%; marginal wound necrosis) within the experimental group. There was no wound infection, implant discomfort, or broken fixation in either group.

CONCLUSION

Managing the patellar inferior pole fracture with wire cerclage through a generated bone hole is both simple and effective. Moreover, an additional step of patellar concentrator fixation facilitates early functional exercise, with satisfactory clinical outcome.

Design, delivery, and evaluation of seminars and hands-on courses worldwide on intraoperative imaging in orthopedic trauma

INTRODUCTION

Although intraoperative imaging is important for assessing the quality of several steps during fracture fixation, most trainees and surgeons have received little formal education on this topic and report they learn "on the job" and "through practice". A planning committee of orthopedic trauma surgeons was established to design a curriculum using "backward planning" to identify patient problems, identify gaps in surgeons' knowledge and skills, and define competencies as a framework for education in order to optimize patient care.

MATERIALS AND METHODS

The committee defined 8 competencies related to intraoperative imaging, with detailed learning objectives for each one (e.g. select the imaging modality, set up the operating room). An interactive, case-based half-day seminar to deliver these objectives for 2-D and 3-D intraoperative imaging during the fixation of common fractures was designed. The seminar was delivered in several locations worldwide over a 6-year period and evaluation and assessment data were gathered online. A full-day procedures course was added and delivered 6 times to address the skills component of competencies.

RESULTS

17 seminars and 6 courses were delivered and attended by an average of 26 and 17 participants respectively (ranges 13-42 and 13-20). Pre-event gap analysis and assessment question scores confirmed needs and motivation to learn in all events. 97% of the 442 seminar participants and 98% of the 100 course participants would recommend the events to colleagues. An average of 88% and 90% respectively learned something new and plan to use it in their practice (range 63%-100%). Commitment to change (CTC) statements showed intended practice improvements related to all competencies.

DISCUSSION

The large percentages of high impact ratings for all events suggest the content met the needs of many participants. Post-event reduction in gap scores and an increase in the desired level of ability for most competencies suggests the content addressed many gaps.

CONCLUSIONS

Case-based, interactive seminars and courses addressing knowledge, skills, and attitudes to optimize the use of intraoperative imaging during the fixation of common fractures help address unmet educational needs for trainees and complements existing formal training.

A modified cable wiring technique with C-shaped passer through a mini-open approach to assist reduction in femoral fractures

Femur fractures reduction can be technically challenging due to the deforming forces exerted by the muscles causing displacement of the fracture fragments. Cerclage wiring is one of the reduction techniques frequently performed, allowing anatomical reduction of the fragments and a more stable fixation when an accurate closed reduction is not possible. We describe a modified cerclage wiring through a minimally invasive technique, using a conventional cannulated C-shaped passer.

Romosozumab efficacy on fracture outcomes is greater in patients at high baseline fracture risk: a post hoc analysis of the first year of the frame study

This study aimed to determine the interaction between baseline FRAX^® fracture probability and romosozumab efficacy. Using an ITT approach, it was determined that the efficacy of romosozumab on clinical fracture, osteoporotic fracture, and major osteoporotic fracture is significantly greater in patients at high baseline fracture risk, when compared with placebo.

INTRODUCTION

Post hoc analyses of placebo-controlled osteoporosis treatment studies have shown significantly greater reductions of fracture incidence for higher fracture risk patients. This study determined the interaction between baseline FRAX^® fracture probability and romosozumab efficacy in the placebo-controlled first year of the phase 3 FRAME study (NCT01575834).

METHODS

Using an ITT approach, an extension of Poisson regression analysis studied the relationship between treatment, FRAX^® 10-year probability of major osteoporotic fracture (MOF, calculated without BMD) and risk of first incident fracture (adjusting for age and follow-up time). Treatment interactions considered outcomes of all clinical fractures, osteoporotic fractures, MOF, clinical vertebral fractures, and morphometric vertebral fractures. Two-sided p value of < 0.1 for the interaction between treatment and FRAX^® was considered significant.

RESULTS

Compared with placebo, romosozumab reduced the incidence of all fracture outcomes in the first year (range: 32% reduction in MOF [p = 0.07] to 80% reduction in clinical vertebral fractures [p = 0.038]). Significant interactions were observed between efficacy and baseline FRAX^® probability for composite outcomes of clinical fractures, osteoporotic fractures, and MOF (p = 0.064-0.084), but not vertebral fractures (p > 0.3). For example, romosozumab decreased all clinical fractures by 22% at the 25th centile of FRAX^® probability but the reduction was 41% at the 75th centile. Exclusion of vertebral fractures from each composite fracture outcome (i.e. only nonvertebral fractures included) showed even stronger interactions with baseline FRAX^® probability (p = 0.036-0.046).

CONCLUSIONS

Efficacy of romosozumab on clinical fracture, osteoporotic fracture, and MOF is significantly greater in patients at high baseline fracture risk compared with placebo.

Clinical impact of intraoperative cone beam tomography and navigation for displaced acetabular fractures: a comparative study at medium-term follow-up

INTRODUCTION

The use of per-operative cone beam tomography imaging for displaced acetabular fractures yields increased post-operative articular reduction accuracy. This study evaluates the need for total hip replacement (THR) and hip-related functional outcomes in patients with displaced acetabular fractures treated with O-ARM guidance compared to those treated under C-ARM guidance.

MATERIALS AND METHODS

This is a prospective matched cohort study. Adult patients (35) with acetabular fractures operated under O-ARM guidance were included. These were matched (age, fracture type) to classically treated patients (35) from our data base. The primary outcome was the need for THR during three year follow-up period. Secondary outcomes were functional scores [Harris Hip score (HHS), Postel-Merle d'Aubigné (PMA)] and hip osteoarthritis grade at three year follow-up. Correlation between reduction gap and THR was evaluated.

RESULTS

At three years, five patients were lost to follow-up in O-ARM group and four in control group. Two patients (6.66%) in the O-ARM group needed THR compared to eight patients in controls (25.80%) (p = 0.046). Hip X-ray osteoarthritis grade averaged 0.00 in patients without THR in O-ARM group compared to 0.22 in patients without THR in controls (p = 0.008). HHS averaged 95.79 in patients without THR in O-ARM group, compared to 93.82 in patients without THR in the control group (p = 0.41%). PMA averaged 17.25 in patients without THR in the O-ARM group compared to 17.04 in patients without THR in group 2 (p = 0.37). Evaluation of correlation between reduction gap and THR rate yielded OR = 1.22 (1.06-1.45).

DISCUSSION

Increased accuracy in articular reduction, with per-operative three-dimensional control of impaction, in acetabular fractures led to significantly less need for THR in patients treated under O-ARM. Patients in both groups are comparable for functional outcomes because those with the lowest scores were offered THR. Per-operative cone beam guidance and navigation use are recommended in tertiary referral centres for acetabular trauma.

Fracture reduction and screw position after 3D-navigated and conventional fluoroscopy-assisted percutaneous management of acetabular fractures: a retrospective comparative study

BACKGROUND

Navigational techniques in orthopaedic trauma surgery have developed over the last years leaving the question of really improving quality of treatment. Especially in marginal surgical indications, their benefit has to be evident. The aim of this study was to compare reduction and screw position following 3D-navigated and conventional percutaneous screw fixation of acetabular fractures. The study hypothesis postulated that better fracture reduction and better screw position are obtained with 3D navigation.

MATERIALS AND METHODS

Preoperative and postoperative CT scans of 37 acetabular fractures treated by percutaneous screw fixation (24 3D-navigated, 13 conventional) were evaluated. Differences in pre- and postoperative fracture gaps and steps were compared in all reconstructions as well as the screw position relative to the joint and the fracture.

RESULTS

The differences in fracture gaps and fracture steps with and without 3D navigation were not significantly different. Distance of the screw from the joint line, angle difference between screw and ideal angle relative to the fracture line, length of the possible corridor used and position of the screw thread did not show any significant differences.

CONCLUSION

Comparison of 3D-navigated and conventional percutaneous surgery of acetabular fractures on the basis of pre- and postoperative CTs revealed no significant differences in terms of fracture reduction and screw position.

Inter-rater variability of three-dimensional fracture reduction planning according to the educational background

Background

Computer-assisted three-dimensional (3D) planning is increasingly delegated to biomedical engineers. So far, the described fracture reduction approaches rely strongly on the performance of the users. The goal of our study was to analyze the influence of the two different professional backgrounds (technical and medical) and skill levels regarding the reliability of the proposed planning method. Finally, a new fragment displacement measurement method was introduced due to the lack of consistent methods in the literature.

Methods

3D bone models of 20 distal radius fractures were presented to nine raters with different educational backgrounds (medical and technical) and various levels of experience in 3D operation planning (0 to 10 years) and clinical experience (1.5 to 24 years). Each rater was asked to perform the fracture reduction on 3D planning software.

Results

No difference was demonstrated in reduction accuracy regarding rotational (p = 1.000) and translational (p = 0.263) misalignment of the fragments between biomedical engineers and senior orthopedic residents. However, a significantly more accurate planning was performed in these two groups compared with junior orthopedic residents with less clinical experience and no 3D planning experience (p < 0.05).

Conclusion

Experience in 3D operation planning and clinical experience are relevant factors to plan an intra-articular fragment reduction of the distal radius. However, no difference was observed regarding the educational background (medical vs. technical) between biomedical engineers and senior orthopedic residents. Therefore, our results support the further development of computer-assisted surgery planning by biomedical engineers. Additionally, the introduced fragment displacement measure proves to be a feasible and reliable method.

Level of Evidence

Diagnostic Level II

Long bone fracture reduction and deformity correction using the hexapod external fixator with a new method: a feasible study and preliminary results

Background

The hexapod external fixator (HEF), such as the Taylor spatial frame (TSF), offering the ability of multidirectional deformities correction without changing the structure, whereas there are so many parameters for surgeons to measure and subjective errors will occur inevitably. The purpose of this study was to evaluate the effectiveness of a new method based on computer-assisted three-dimensional (3D) reconstruction and hexapod external fixator for long bone fracture reduction and deformity correction without calculating the parameters needed by the traditional usage.

Methods

This retrospective study consists of 25 patients with high-energy tibial diaphyseal fractures treated by the HEF at our institution from January 2016 to June 2018, including 22 males and 3 females with a mean age of 42 years (range 14–63 years). Hexapod external fixator treatments were conducted to manage the multiplanar posttraumatic deformities with/without poor soft-tissue that were not suitable for internal fixation. Computer-assisted 3D reconstruction and trajectory planning of the reduction by Mimics were applied to perform virtual fracture reduction and deformity correction. The electronic prescription derived from the length changes of the six struts were calculated by SolidWorks. Fracture reduction was conducted by adjusting the lengths of the six struts according to the electronic prescription. Effectiveness was evaluated by the standard anteroposterior (AP) and lateral X-rays after reduction.

Results

All patients acquired excellent functional reduction and achieved bone union in our study. After correction, the mean translation (1.0 ± 1.1 mm) and angulation (0.8 ± 1.2°) on the coronal plane, mean translation (0.8 ± 1.0 mm) and angulation (0.3 ± 0.8°) on the sagittal plane were all less than those (6.1 ± 4.9 mm, 5.2 ± 3.2°, 4.2 ± 3.5 mm, 4.0 ± 2.5°) before correction (P < 0.05).

Conclusions

The computer-assisted three-dimensional reconstruction and hexapod external fixator-based method allows surgeons to conduct long bone fracture reduction and deformity correction without calculating the parameters needed by the traditional usage. This method is suggested to apply in those unusually complex cases with extensive soft tissue damage and where internal fixation is impossible or inadvisable.

[Approaches and fixation of femoral neck fractures in children-transgluteal approach]

Operationsziel

Die Hüftkopfzirkulation schonende, anatomische Reposition und sichere Stabilisierung von Schenkelhalsfrakturen im Kindesalter über einen transglutealen Zugang.

Indikationen

Intra-extraartikuläre proximale Femurfrakturen (Schenkelhalsfrakturen) AO 31-M/2.1 I‑III; 31-M/3.1 I‑III; 31-M/3.2 I‑III.

Kontraindikationen

Keine.

Operationstechnik

Präparation eines Muskellappens durch Ablösen des proximalen M. vastus lateralis inklusive des anterolateralen Anteils des M. glutaeus medius vom proximalen Femur respektive Trochanter major. Ablösen des glutaeus minimus von der Gelenkkapsel und Weghalten nach dorsal, ohne die Insertion des Muskels vollständig abzulösen. Die anterolaterale Gelenkkapsel kann nun vollständig exponiert werden. Arthrotomie der Gelenkkapsel und Darstellen des Schenkelhalses. Unter Sicht nun vorsichtige, kontrollierte Reposition der Fraktur unter Schutz der retinakulären Gefäße.

Weiterbehandlung

Mobilisation an Gehstöcken. Abstellen des Fußes erlaubt. Zur vollständigen Anheilung der Hüftabduktoren sollte eine aktive Abduktion sowie passive Adduktion für 4 bis 6 Wochen (je nach Alter des Patienten) vermieden werden.

Ergebnisse

In der eigenen Klink zeigten sich in den letzten 10 Jahren exzellente Ergebnisse bei 29 Patienten nach Behandlung von kindlichen Schenkelhalsfrakturen mit diesem Operationszugang. Eine operationsbedingte Femurkopfnekrose trat nicht auf.

3D object reassembly using region-pair-relation and balanced cluster tree

BACKGROUND AND OBJECTIVE

Object reassembly is a key technology in scenarios such as surgical planning and broken object restoration. Based on previous research, this work intends to explore the general tasks of 3D object reassembly, including conventional object reconstruction and bone fracture reduction.

METHODS

We introduce an efficient and robust region-pair-relation descriptor, which incorporates strong geometric constraints and remains invariant to rotation and translation. We segment the fractured objects using balanced cluster tree, and develop a coarse-to-fine method for object reassembly. The matching quality of potential region contact pairs at different depths is estimated recursively from the root of the tree. Once the best contact pairs are determined, the least squares method is implemented to obtain the matching results. In addition, we also provide a semi-interactive manipulation to deal with the complex objects.

RESULTS

For most types of broken objects, our approach can generate high accuracy matching results within 10 s, with the cluster tree depth equals to 11. It allows the automatic reassembly of different-sized fragments. For bone fracture blocks with cancellous structures, a semi-interactive operation is integrated so that the precise matching can also be achieved in 30 s.

CONCLUSION

The proposed framework can be expanded to various object reassembly tasks in either automated or semi-automated manner, including the fracture reduction problem which used to be an intensive manual process. Therefore, our work shows significant advantages in medical applications.

A novel anatomically pre-contoured side-specific titanium plate versus the reconstruction plate for quadrilateral plate fractures of the acetabulum: a propensity-matched cohort study

Background

Surgical treatment of acetabular fractures involving a quadrilateral plate is a challenge to orthopedic surgeons. We have developed a novel fixation technique using a specially shaped reconstruction plate combined with several buttress screws of a quadrilateral plate which was also called a dynamic anterior plate-screw system for quadrilateral plate (DAPSQ) to treat acetabular fractures involving quadrilateral plate since 2005 (RP group). And the long-term follow-up results have confirmed the effectiveness and safety of this technique. After 2016, standardized titanium plate (STP group) of DAPSQ have been designed and applied. The aim of the study was to compare the clinical efficacy of anatomical plate and the reconstruction plate of DAPSQ in the treatment of quadrilateral plate fractures.

Methods

We led a propensity-matched cohort study of quadrilateral plate fractures. Twenty-two patients were included in the STP group during the inclusion period (2016–2018) and were matched to 22 cases in our database of the RP group (2008–2016). The primary outcome measures were the quality of reduction and functional outcomes. Intraoperative conditions were also compared.

Results

Of these 22 consecutive patients in the STP group, the mean age was 46.7 years and the most common fracture pattern was a both-column fracture (12 cases, 54.5%) according to Letournel-Judet classification. The mean follow-up period was 23.1 months (range 12–37). There were no significant differences between the two groups with regard to the quality of reduction using the Matta radiological criteria and functional outcomes evaluated by the modified Merle d’Aubigné score (P > 0.05). Compared with the RP group, the STP group had a shorter operation time (245.1 min vs. 286.8 min, P = 0.020), less intraoperative blood loss (1136.4 mL vs. 1777.3 mL, P = 0.014), and transfusion (780.9 vs. 1256.8 mL, P = 0.035). The complication rate was 18.2% in the STP group, and there was no significant difference compared with the RP group (36.4%) (P > 0.05). None of the cases in the two groups had quadrilateral screws entering the hip or implant failure.

Conclusions

The fixation of standardized titanium plate in quadrilateral plate fractures showed a similar result to the reconstruction plate, in terms of quality of reduction and functional outcome. The standardized titanium plate of DAPSQ has the advantages of a short operation time, less intraoperative bleeding, and blood transfusion, and it is worth further promotion and research.

Evolution of imaging in surgical fracture management

Intraoperative imaging has been advanced substantially over the last decades. It supports localization of the region of interest, verification of the preoperatively classified fracture pattern, identification of correct insertion point of the implant, placement of instruments and fixation material, and verification of correct fracture reduction and implant positioning. While conventional fluoroscopic 2D imaging remains the gold standard in intraoperative imaging, critical anatomical regions are predestined for intraoperative 3D imaging. Additional options such as perioperative virtual planning, simulation, and surgical training, 3D printing techniques and 3D augmented reality visualization may potentially open new windows to improve surgical results in fracture care. This manuscript presents an update on current and upcoming imaging techniques in orthopaedic and trauma surgery focusing on technical advances for decreasing malreduction, malalignment, and malposition, as well as tips and tricks for daily surgical practice in order to improve clinical outcomes and patients' and surgeons' safety.

Intertrochanteric Femur Fracture Treatment in Asia: What We Know and What the World Can Learn

Hip fractures are of great interest worldwide as the geriatric population continues to increase rapidly. Currently, surgeons prefer to use cephalomedullary nail for internal fixation of pertrochanteric/intertrochanteric fractures. This article summarizes 10 concepts in hip fracture treatment over the past 20 years, including fracture line mapping, proximal lateral wall and anterior cortex, posteromedial lesser trochanter-calcar fragment, anteromedial cortex support reduction, changes of fracture reduction after sliding and secondary stability, nail entry point and wedge-open deformity, tip-apex distance and calcar-referenced tip-apex distance, femoral anterior bowing and nail modification, long nails for wide medullary canal and large posterior coronal fragment, and postoperative stability score.

Surgical results of atypical femoral fractures in long-term bisphosphonate and glucocorticoid users - Relationship between fracture reduction and bone union

Atypical femoral fracture (AFF) associated with bisphosphonate (BP) use is common, and its pathophysiology is considered to involve severely suppressed bone turnover. Surgical results following AFF fixation have not been optimal, with some cases resulting in delayed union or nonunion. Regarding bone healing, glucocorticoid (GC) has similar properties to BP. We investigated the surgical results of AFF fixation in both users of BP and GC, especially with regard to intraoperative fracture reduction. We included 12 AFFs in 11 patients with a follow-up over one year who all took GC for autoimmune disease and BP for management of GC-induced osteoporosis. Their mean age was 62 years and 10 patients were female. Six fractures were located in the subtrochanteric region of the femur and six were in the diaphysis. Intramedullary nails were used to treat all fractures. Union rate was recorded, and the status of the reduction immediately after the operation was analyzed. Four of the 12 cases developed nonunion, and three of them required additional surgery. The relationship between alignment, cortical continuity, fracture gap, and bone union was not significant. In the nonunion cases, cortical continuity on the anteroposterior and lateral views were never confirmed. Even if cortical continuity in either of the views was there, the two limbs resulted in nonunion. One third of the patients with AFF secondary to long-term BP and GC use developed nonunion despite their fracture reductions being acceptable. We consider strict reduction should be needed for these cases with disadvantage condition to bone union.

The value of 3D reconstructions in determining post-operative reduction in acetabular fractures: a pilot study

Background

In patients with acetabular fractures, the reconstructed three-dimensional (3D) model of the contralateral acetabulum could be used as a mirrored template for the anatomical configuration of the affected joint. This has not been validated.

Objective

To investigate whether the right and left acetabula, as reconstructed 3D models, are valid mirrored duplicates that can be used as a reference model for the contralateral side.

Methods

CT scans of twenty patients with unaffected acetabula were used. The symmetry of the generated 3D models was evaluated through: (1) mirroring of the acetabulum; (2) initial rough matching; (3) automatic optimisation of the matching via surface-based matching; (4) calculation of distances between surfaces by evaluating the Euclidean (straight-line) error distance between the closest points between left and right. The percentages of surface points of the left and right acetabulum with a distance smaller than 0.5, 1.0, 1.5 and 2.0 mm were calculated and evaluated, in relation to Matta’s criteria, for acetabular fracture reductions.

Results

The mean distance deviation was less than 0.75 mm in all 40 comparisons. The calculated distances in 90.7% of the surface points of the left and right acetabulum were below the tolerance threshold of 1.0 mm, based on Matta’s anatomical reduction criteria, and 98.7% of the surface points scored below Matta’s imperfect tolerance threshold of 2.0 mm.

Conclusion

This study demonstrates 3D reconstructed models of healthy left and right acetabula are highly similar and could potentially be used as mirrored duplicates. The next step will be to investigate these results in patients with reduced acetabular fractures.

Fixator-assisted nailing of tibial fractures: New surgical technique and presentation of first 30 cases

BACKGROUND

Intramedullary nailing is considered a "gold standard" for treatment of tibial shaft fractures. However, some types of fractures are typically considered as "difficult for nailing". This group includes the periarticular fractures, fractures of both bones at the same level, comminuted and segmental fractures of the tibia. Fixator-assisted nailing (FAN) is an effective method treatment of these types of fractures. The main requirements for the ideal reduction device are an ease of its installation and an ability of multiplanar fracture reduction. Fixator-assisted nailing (FAN) with the use of two perpendicular to each other monolateral tubular frames perfectly meets these requirements. In this study we present this new surgical technique and the analysis of first 30 cases.

METHODS

A prospective analysis was conducted for 30 patients with "difficult for nailing" tibial fractures treated with fixator-assisted nailing in our institution between September 1^st, 2017, and March 1^st, 2018. The duration of surgery and its different stages, the time of fluoroscopy, difficulties encountered during surgery, were analyzed. Clinical and radiological methods were used to evaluated reduction quality.

RESULTS

In all 30 cases the acceptable reduction was achieved. The mean duration of the surgical procedure was 73.7 ± 3 min. The mean duration of fluoroscopy 85.9 ± 4.8 s. In 7 cases we faced with technical difficulties, which were successfully addressed.

CONCLUSION

The described technique of FAN is an effective method for the treatment of "difficult for nailing" tibial fractures. Future multi-centered studies with a larger number of patients are needed to validate our results.

[Definitions and explanations on the topic of fracture reduction]

The process of reduction is a key step for successful fracture treatment. The goal of fracture reduction is the realignment of the displaced fractured fragments caused by muscle tension or impaction back into the original anatomic relationship. The reduction process includes not only the application of force at or remote from the fracture site to reverse the deforming forces but also the preoperative planning where to apply these forces and by what means. Furthermore, consideration should be preoperatively given on how to position the patient and the C‑arm and how to temporarily maintain reduction for intraoperative x‑ray control of the axis, rotation and lengths before definitive fixation.

Local Postoperative Complications after Surgery for Intertrochanteric Fractures Using Cephalomedullary Nails

Purpose

Cephalomedullary nails (CMN) are commonly used for the surgical treatment of intertrochanteric fractures. This study aimed to evaluate overall postoperative local complications by reviewing patients who received surgical treatment using three different types of implants.

Materials and Methods

The study sample included 353 patients (107 males, 246 females) who underwent surgery using CMN for intertrochanteric fractures. Three different types of implants were used: i) the Gamma3® (Stryker) in 80 cases, ii) the Targon® PF (Aesculap) in 225 cases, and iii) the Compression Hip Nail® (Trademedics) in 48 cases. The mean age was 82.6 (range, 60–109) years and the average follow-up period was 15 (range, 6–80) months. Postoperative local complications and risk factors of cut-out were assessed.

Results

The most common complication was cut-out (n=26). Other complications included non-union (n=3), periprosthetic fracture (n=2), avascular necrosis (n=1), heterotopic ossification (n=1), and sleeve pull out (n=1). Multivariate analysis revealed that the cut-out group had a higher rate of poor reduction compared to the non-complicated group (P<0.001). Although the mean tip-apex distance (TAD) was 18.4 mm in the non-complicated group, lower than that of the cut-out group (P=0.001), multivariate analysis revealed that TAD was not a significant risk factor for cut-out (P=0.065).

Conclusion

Cut-out is the most common local complication associated with surgical treatment of intertrochanteric fractures using CMN. Proper reduction appears to be important in lowering the risk of cut-out. Maintaining low TAD is another critical factor in achieving sufficient fixation of lag screw to the subchondral bone of the femoral head.

Arthroscopic-Assisted Open Reduction Internal Fixation

The indications for arthroscopy have expanded over the years. Arthroscopic-assisted open reduction internal fixation in the setting of acute trauma is gaining popularity with foot and ankle surgeons. It serves to facilitate direct visualization of fracture fragments and allows for precise articular reduction with minimal soft tissue insult. Current evidence reports a high incidence of chondral injury with ankle fractures. Arthroscopy performed at the time of open reduction internal fixation allows for joint inspection and potential treatment of these posttraumatic defects.

Anteromedial cortical support reduction in unstable pertrochanteric fractures: a comparison of intra-operative fluoroscopy and post-operative three dimensional computerised tomography reconstruction

PURPOSE

Anteromedial cortical support reduction is favourable for secondary stability after limited sliding in unstable pertrochanteric fractures. The aim of this study was to compare the accuracy and agreement between intra-operative fluoroscopy and post-operative 3D reconstruction.

MATERIALS AND METHODS

A retrospective analysis of 28 patients (mean 81.6 years) treated with short cephalomedullary nails was performed. All patients had full sets of intra-operative fluoroscopy and post-operative 3D CT images. Observation was focused on the position of the anteromedial cortices of the inferior corner between the head-neck fragment and femoral shaft, and their relationship was categorised into three types: positive, neutral and negative. The percentage of subsequent changes in cortical reduction quality between fluoroscopy and 3D CT was calculated and compared.

RESULTS

There were 24 positive (85.7%), four neutral and no negative positions in the anteroposterior (AP) view and one positive, 20 neutral (71.4%) and seven negative positions in the lateral view from fluoroscopy. On post-operative 3D CT images with a full range of rotation, definitive anteromedial cortical contact (positive and neutral support) was observed in 18 cases (64.3%). Ten cases lost the anteromedial cortical buttress. With the posteromedial region of the lesser trochanter detached, a positive AP cortical position combined with a positive/neutral lateral position on fluoroscopy (17 cases) was highly predictive of reliable, definitive cortical support (15 cases, 88.2%) on 3D CT. A negative lateral position on fluoroscopy (seven cases), regardless of the combination in the AP view, was likely to predict the final loss of cortical support (six cases, 85.7%) on 3D CT; a positive/neutral lateral position (21 cases) was only associated with loss of support in four cases (19.1%) (p < 0.05).

CONCLUSIONS

A lateral negative position of the anterior cortex on fluoroscopy for unstable pertrochanteric fractures may be highly predictive of post-operative final loss of the anteromedial cortical buttress, which should be avoided during operation.

Computer-assisted surgery: The use of stored intraoperative images for accurate restoration of femoral length and rotational alignment after fracture

Most femoral fractures are now managed with minimally invasive internal fixation. In the absence of formal exposure of the fracture lines, these procedures make heavy use of C-arm fluoroscopy to allow both fracture reduction and placement of implants, at the expense of measurable radiation exposure to both patient and surgeon. Although this technology has been commercially available for over a decade, it has not yet been widely accepted by the Orthopaedic community.

The role of calcium supplementation in healthy musculoskeletal ageing : An expert consensus meeting of the European Society for Clinical and Economic Aspects of Osteoporosis, Osteoarthritis and Musculoskeletal Diseases (ESCEO) and the International Foundation for Osteoporosis (IOF)

The place of calcium supplementation, with or without concomitant vitamin D supplementation, has been much debated in terms of both efficacy and safety. There have been numerous trials and meta-analyses of supplementation for fracture reduction, and associations with risk of myocardial infarction have been suggested in recent years. In this report, the product of an expert consensus meeting of the European Society for Clinical and Economic Aspects of Osteoporosis, Osteoarthritis and Musculoskeletal Diseases (ESCEO) and the International Foundation for Osteoporosis (IOF), we review the evidence for the value of calcium supplementation, with or without vitamin D supplementation, for healthy musculoskeletal ageing. We conclude that (1) calcium and vitamin D supplementation leads to a modest reduction in fracture risk, although population-level intervention has not been shown to be an effective public health strategy; (2) supplementation with calcium alone for fracture reduction is not supported by the literature; (3) side effects of calcium supplementation include renal stones and gastrointestinal symptoms; (4) vitamin D supplementation, rather than calcium supplementation, may reduce falls risk; and (5) assertions of increased cardiovascular risk consequent to calcium supplementation are not convincingly supported by current evidence. In conclusion, we recommend, on the basis of the current evidence, that calcium supplementation, with concomitant vitamin D supplementation, is supported for patients at high risk of calcium and vitamin D insufficiency, and in those who are receiving treatment for osteoporosis.

Fracture reduction by postoperative mobilisation for the treatment of hyperextension injuries of the thoracolumbar spine in patients with ankylosing spinal disorders

INTRODUCTION

The aim of this study was to evaluate results of surgical stabilisation of hyperextension injuries of the thoracolumbar spine in patients with ankylosing spinal disorders using two different treatment strategies: the conventional open rigid posterior instrumentation and percutaneous less rigid posterior instrumentation. Surgical and non-surgical complications, the postoperative radiological course, and clinical outcome at final follow-up were comparatively assessed. Moreover, we sought to discuss important biomechanical and surgical aspects specific to posterior instrumentation of the ankylosed thoracolumbar spine as well as to elaborate on the advantages and limitations of the proposed new treatment strategy involving percutaneous less rigid stabilisation and fracture reduction by postoperative mobilisation.

MATERIALS AND METHODS

Between January 2006 and June 2012, a consecutive series of 20 patients were included in the study. Posterior instrumentation was performed either using an open approach with rigid 6.0 mm bars (open rigid (OR) group) or via a percutaneous approach using softer 5.5 mm bars (percutaneous less rigid (PLR) group). Complications as well as the radiological course were retrospectively assessed, and patient outcome was evaluated at final follow-up using validated outcome scores (VAS Spine Score, ODI, RMDQ, Parker Mobility Score, Barthel Score and WHOQOL-BREF).

RESULTS

Surgical complications occurred more frequently in the OR group requiring revision surgery in two patients, while there was no revision surgery in the PLR group. The rate of postoperative complications was lower in the PLR group as well (0.7 vs. 1.3 complications per patient, respectively). Fracture reduction and restoration of pre-injury sagittal alignment by postoperative mobilisation occurred within the first 3 weeks in the PLR group, and within 6 months in the OR group. The clinical outcome at final follow-up was very good in both groups with no relevant loss in VAS Spine Score (pain and function), Parker Mobility Score (mobility), and Barthel Index (social independency) compared to pre-operative values.

CONCLUSIONS

This study indicates that the proposed treatment concept involving percutaneous less rigid posterior instrumentation and fracture reduction by postoperative mobilisation is feasible, seems to facilitate adequate reduction and restoration of pre-injury sagittal alignment, and might have the potential to reduce the rate of complications in the management of hyperextension injuries of the ankylosed thoracolumbar spine.

Distal Femur Locking Plate: The Answer to All Distal Femoral Fractures

INTRODUCTION

Good results have been published by researchers with distal femur nail, dynamic condylar screw and even addition of a medial plate to a distal femur locking plate for treating distal femur fractures. By this study, we explore the capability of a distal femur locking plate to counter distal femur fractures of extra- articular, partial or intra- articular nature. Positive results have been published by various groups from all over the world.

AIM

To study the functional and radiological outcome of distal femoral fractures in skeletally mature patients treated by open reduction and internal fixation with distal femur locking plate.

MATERIALS AND METHODS

This was a prospective study conducted from January 2012 to March 2014 at the Government Medical College and Hospital (GMCH) with a 2 year follow-up. Twenty five skeletally mature patients with post-traumatic distal femur fractures were included. Patients with open grade 3B and 3C distal femur fractures, according to the Gustilo- Anderson classification and pathological distal femur fractures were excluded from the study. Patients with any fracture other than the distal femur in the ipsilateral limb were excluded from the study. Follow-up at 3 months, 6 months, 1 year and 2 years was carried out and evaluation was done according to the Neer scoring system. The statistical data analysis was carried out using SPSS version 20 (IBM, Chicago, USA). The p-value <0.05 was considered significant.

RESULTS

Following all principles of fracture reduction, union was achieved in all patients with mean time to radiological union being 19 weeks. The mean Range of Motion (ROM) was 109 degrees with 20 patients having a Neer score graded as excellent to satisfactory. Our study had nine cases which required additional surgeries. Out of these, all nine cases required bone grafting, three also required antibiotic cement bead insertion initially. Three patients developed complications in the form of infection (two cases) and mal-union (one case) during the course of our study, but were completely treated by the end of the study.

CONCLUSION

Positive results can be obtained by distal femur locking plate alone as it is the main implant of choice for distal femur fractures of all varieties. Best outcome is expected if fracture fixation is done following all the basic principles of fracture fixation and taking benefit of the mechanical properties of a locking plate.

[Posttraumatic deformities of the knee joint : Intra-articular osteotomy after malreduction of tibial head fractures]

Malreduction of tibial head fractures often leads to malalignment of the lower extremity, pain, limited range of motion and instability. The extent of the complaints and the degree of deformity requires an exact analysis and a standardized approach. True ligamentous instability should be distinguished from pseudoinstability of the joint. Also extra- and intra-articular deformities have to be differentiated. In intra-articular deformities the extent of articular surface displacement, defects and clefts must be accurately evaluated. A specific surgical approach is necessary, which allows adequate visualization, correct osteotomy and refixation of the fractured area of the tibial head. In the long-term course good clinical results are described for intra-articular osteotomies. If the joint is damaged to such an extent that it cannot be reconstructed or in cases of advanced posttraumatic osteoarthritis, total knee arthroplasty may be necessary; however, whenever possible and reasonable, anatomical reconstruction and preservation of the joint should be attempted.

Percutaneous extrapedicular vertebroplasty with expandable intravertebral implant in compression vertebral body fracture in pediatric patient-technical note

PURPOSE

The aim of the article is to present the new extrapedicular percutaneous technique for posttraumatic vertebral column fracture.

METHODS

A 15-year-old boy needed a surgical Th8 posttraumatic vertebral body (VB) compressive fracture reduction due to insufficient conservative treatment and consistent severe clinical symptoms. After 6 months of external Jevett long-roll brace stabilization, progressive sagittal balance disturbance of thoracic kyphosis was measured and persistent clinical symptoms were observed. It was decided to present a surgical technique method allowing to attempt to reduce VB fracture, rebalance the vertebral column (VC) without any motion limitation, and decrease clinical symptoms. The procedure was performed percutaneously from extrapedicular approach with intravertebral implant (Spine Jack®-Vexim™) and cement (Interface®-Vexim™) under fluoroscopic imaging (Ziehm™ 8000®).

RESULTS

The whole procedure was uneventful. Now, the child is free from clinical symptoms and the partial reduction of VB fracture was achieved. The patient has been followed for 3 months. In the control CT scans, the VB fracture reduction is stable and no progression of thoracic kyphosis angle is observed. Furthermore since the surgical procedure, the patient is clinical symptom free.

CONCLUSION

The extrapedicular percutaneus technique of VB fracture reduction with intravertebral fixation allowed to partially reduce the VB compressive fracture, rebalance the VC without any motion limitation, avoid external long-roll brace, and eliminate clinical symptoms. The procedure is minimally invasive, fast, and clinically effective. However, the technique should be restricted only to carefully selected clinical cases.

Dual locked plating of unstable bicondylar tibial plateau fractures

The operative treatment of displaced bicondylar tibial plateau fractures is challenging. The displaced condyles must be reduced, depressed plateaus must be elevated and adequately supported and early rehabilitation must be encouraged in order to obtain good clinical results. This retrospective study was designed to evaluate the clinical outcomes of patients with bicondylar tibial plateau fractures treated with dual locked plates using raft screws with MIPO technique and autologous bone grafting. We hypothesized that in this group of patients dual locked plating reduces the complication rates by avoiding loss of reduction due to the accomplished rigid fixation. Twenty-two consecutive patients with bicondylar tibial plateau fractures (AO Type C) were included in this study. The mean follow up was 26 months. Bone healing was achieved in all patients with 3 cases of superficial and 1 case of deep infection. Secondary loss of reduction, secondary loss of alignment, early post-traumatic arthritis were not observed in this study. The Lysholm knee score showed an average of 80.5 points (range: 61.5-90) at the final follow up assessment. Optimal fixation of the fracture with dual locked plating which allows immediate motion and partial weight bearing may be an alternative concept to prevent secondary loss of reduction to obtain a good clinical outcome.

Influence of time to surgery on the incidence of complications in femoral neck fracture treated with cannulated screws

BACKGROUND

Osteosynthesis of femoral neck fractures is particularly indicated in patients aged under 60 years. A prolonged interval between the fracture and surgical fixation has been associated with avascular necrosis (AVN) of the femoral head. The primary objective of this study was to evaluate the association between the time to surgery and the development of complications in patients with femoral neck fractures.

METHODS

Patients with displaced fractures of the femoral neck (Garden III or IV) who underwent fixation with three cannulated screws in the inverted triangle configuration from January 2009 to December 2010 were evaluated retrospectively for the development of orthopaedic complications. Patients were divided into two groups according to the time to surgery (within 7 days or more than 7 days). Complication rates were compared between the two groups. Regression analyses were performed to assess the risk factors for complications.

RESULTS

Thirty-one patients were included in the study; the duration of follow-up ranged from 24 to 50 months. The time from fracture to surgery ranged from 3 to 18 days. Fifteen patients underwent surgery within 7 days, and 16 patients underwent surgery after 7 days. There were four cases of femoral head necrosis. One patient had an associated infection; one patient experienced non-union, and another demonstrated osteosynthesis failure. There were no statistically significant differences in the overall rate of complications between the groups (p = 0.999). None of the preoperative parameters or fracture characteristics were predictive factors for complications. The only factor associated with the development of complications was inadequate fracture reduction in the anteroposterior (AP) view (odds ratio [OR] = 35.50, 95% confidence interval [CI] = 2.56 to 548.36, p = 0.008).

CONCLUSIONS

The interval between the occurrence of the injury and surgical fixation is not associated with the development of complications in fractures of the femoral neck. Inadequate fracture reduction in the AP view is a predictive factor for complications in these fractures.

Minimal invasive para-rectus approach for limited open reduction and percutaneous fixation of displaced acetabular fractures

INTRODUCTION

Minimal invasive fixation has been reported as an alternative option for treatment of acetabular fractures to avoid blood loss and complications of extensive approaches. Closed reduction and percutaneous lag screw fixation can be done in minimally displaced acetabular fractures. Open reduction is indicated, if there is wide displacement. In this study, we report the use of a mini-open anterior approach to manipulate and reduce anteriorly displaced transverse acetabular fractures combined with percutaneous lag screw fixation.

METHODS

This report included eight patients. All had anterior displaced simple transverse acetabular fractures. An oblique mini-incision was made above and medial to the mid-inguinal point, and lateral to the lateral border of rectus abdominis muscle. The external abdominal oblique aponeurosis was incised along its fibres. The arched fibres of internal abdominal oblique were displaced medially above the inguinal ligament to expose and incise the fascia transversalis. Care was taken to avoid injury of ilioinguinal nerve, inferior epigastric vessels, and spermatic cord. The external iliac vessels were palpated and protected laterally. A blunt long bone impactor was introduced through this small incision to manipulate and reduce the fracture under fluoroscopic control. Fluoroscopic guided percutaneous lag screw fixation was done in all patients.

RESULTS

The average time to operation was 4 days. Average blood loss was 110mL. Operative time averaged 95min. Maximum fracture displacement averaged 10mm preoperatively and 1.3mm postoperatively. According to Matta score, anatomical reduction of the fracture was achieved in five patients and imperfect in three. Follow up averaged 27 months. Wound healing occurred without complications and fracture union was achieved without secondary displacement in all patients. Average time to fracture healing was 14 weeks. According to the modified Merle d'Aubigné score, functional outcome was good to excellent in all patients.

DISCUSSION AND CONCLUSION

Limited open reduction can solve the problem of fracture reduction, which is the main concern in minimal invasive fixation of acetabular fractures. It may help the inclusion of displaced acetabular fractures for percutaneous lag screw fixation. This mini-para-rectus approach has the advantages of minimal soft tissue dissection with the possible anatomical reduction of simple transverse displaced acetabular fractures.

Anterior Screw Fixation of Anteriorly Displaced Type III Odontoid Fracture Corrected by Transoral Digital Manipulation

Type III odontoid fractures have been treated by several methods. In case of anteriorly displaced type III odontoid fracture which is not corrected by closed reduction, anterior screw fixation cannot be used. We report the first case of anterior screw fixation of anteriorly displaced type III odontoid fracture corrected by transoral digital manipulation.

Use of mono cortical screws as an aid to zygomatic complex fracture reduction

INTRODUCTION

Zygomatic complex fractures by virtue of its anatomic area poses a great challenge in reduction of the fracture. Uses of various methods have been mentioned in English literature.

METHOD

A new technique describing the use of reduction screw with a self-holding screwdriver in reduction of the zygomatic complex fracture.

CONCLUSION

We found the method to be simple and effective and recommend its application in daily practice.