Light-induced thermoelastic sensor for ppb-level H2S detection in a SF6 gas matrices exploiting a mini-multi-pass cell and quartz tuning fork photodetector

We present an optical sensor based on light-induced thermoelastic spectroscopy for the detection of hydrogen sulfide (H2S) in sulfur hexafluoride (SF6). The sensor incorporates a compact multi-pass cell measuring 6 cm × 4 cm × 4 cm and utilizes a quartz tuning fork (QTF) photodetector. A 1.58 µm near-infrared distributed feedback (DFB) laser with an optical power of 30 mW serves as the excitation source. The sensor achieved a minimum detection limit (MDL) of ∼300 ppb at an integration time of 300 ms, corresponding to a normalized noise equivalent absorption coefficient (NNEA) of 3.96 × 10-9 W·cm-1·Hz-1/2. By extending the integration time to 100 s, the MDL can be reduced to ∼25 ppb. The sensor exhibits a response time of ∼1 min for a gas flow rate of 70 sccm.

Engineering a Heterophase Interface by Tailoring the Pt Coverage Density on an Amorphous Ru Surface for Ultrasensitive H2S Detection

Amorphous/crystalline heterophase engineering is emerging as an attractive strategy to adjust the properties and functions of nanomaterials. Here, we reveal a heterophase interface role by precisely tailoring the crystalline Pt coverage density on an amorphous Ru surface (cPt/aRu) for ultrasensitive H2S detection. We found that when the atomic ratio of Pt/Ru increased from 10 to 50%, the loading modes of Pt changed from island coverage (1cPt/aRu) to cross-linkable coverage (3cPt/aRu) and further to dense coverage (5cPt/aRu). The differences in coverage models further regulate the chemical adsorption of H2S on Pt and the electronic transformation process on Ru, which can be proved by ex situ X-ray photoelectron spectroscopy experiments. Notably, a special cross-linkable coverage 3cPt/aRu on ZnO shows the best gas-sensitive performance, in which the operating temperature reduces from 240 to 160 °C compared with pristine ZnO and the selectivity coefficient for H2S gas improves from ∼1.2 to ∼4.6. This is mainly benefit from the maximized exposure of the amorphous/crystalline heterophase interface. Our work thus provides a new platform for future applications of amorphous/crystalline heterogeneous nanostructures in gas sensors and catalysis.

Characterization of Porous CuO Films for H2S Gas Sensors

Using a thermal evaporator, various porous Cu films were deposited according to the deposition pressure. CuO films were formed by post heat treatment in the air. Changes in morphological and structural characteristics of films were analyzed using field-emission scanning electron microscopy (FE-SEM) and X-ray diffraction (XRD). Relative density and porosity were quantitatively calculated. CuO films with various pores ranging from 39.4 to 95.2% were successfully manufactured and were applied as gas sensors for H₂S detection on interdigitated electrode (IDE) substrate. Resistance change was monitored at 325 °C and an increase in porosity of the film improved the sensor performance. The CuO-10 gas sensor with a high porosity of 95.2% showed a relatively high response (2.7) and a fast recovery time (514 s) for H₂S 1.5 ppm. It is confirmed that the porosity of the CuO detection layer had a significant effect on response and recovery time.

Near-Infrared Fluorescent Probe for H2S Detection: Will pH Affect the Intracellular Sensing?

Near-infrared (NIR) fluorescent probe has exhibited unique advantages for in vitro and in vivo detection of hydrogen sulfide (H₂S), an important endogenous gasotransmitter in redox homeostasis and multiple life processes. However, both the pH-dependent emission of NIR probes and H₂S conversions would normally affect the accurate detection in cellular environments in different acidic conditions. Herein, both experiments and theoretical calculations were carried out to examine the effect of pH on intracellular sensing of H₂S by the NIR probe. Selecting a NIR probe of R1 with dual-excited NIR responses to H₂S as the model, the pH-dependent R1 emission was confirmed by optical measurements, whose structural changes were further examined by mass spectrometry (MS). Significantly, the dynamic changes versus pH increase were employed for the online monitoring of ambient MS (AMS), observing important intermediate species without sample pretreatments. Thereby, intermediates and transition states were confirmed by theoretical calculations, which proposed the mechanism of nucleophilic substitution, followed by the hydrolysis process with increasing pH. As examined, R1 exhibited a relatively stable NIR emission at pH 4-8, while a dramatic change in signals occurred at higher-pH conditions. Therefore, R1 was demonstrated to be reliable for intracellular sensing of H₂S and had been confirmed by cell imaging. This work has initiated a comprehensive strategy for evaluating fluorescence (FL) probes, showing potential for the development of fluorescent probes.

A H2 S-Specific Ultrasensitive Fluorogenic Probe Reveals TMV-Induced H2 S Production to Limit Virus Replication

Understanding the role of H₂ S in host defense mechanisms against RNA viruses may provide opportunities for the development of antivirals to combat viral infections. Here, we have developed a green-emitting fluorogenic probe, which exhibits a large fluorescence response at 520 nm (>560-fold) when treated with 100 μM H₂ S for 1 h. It is highly selective for H₂ S over biothiols (>400-fold F/F₀ ) and has a detection limit of 12.9 nM. We demonstrate the application of the probe for endogenous H₂ S detection in vivo for the understanding of its roles in antiviral host defense. Such virus-induced H₂ S inhibits viral replication by reducing gene expression of RNA-dependent RNA polymerase (RdRp) and coat protein (CP). Additionally, a H₂ S donor GYY4137 showed significantly antiviral activity as ribavirin, a broad-spectrum drug against RNA viruses. Furtherly, we propose a possible molecular mechanism for the TMV-induced H₂ S biogenesis. This work provides a proof-of-principle in support of further studies identifying endogenous H₂ S and its donors as potential antivirals toward RNA viruses.

A Highly Sensitive and Room Temperature CNTs/SnO2/CuO Sensor for H2S Gas Sensing Applications

Gas sensors based on tin dioxide-carbon nanotube composite films were fabricated by a simple inexpensive sol-gel spin-coating method using PEG400 as a solvent. Nanostructured copper was coated on CNTs/SnO₂ film, and then copper was transformed into copper oxide at 250 °C. Resistivity of the final composite films is highly sensitive to the presence of H₂S, which became easily attached or detached at room temperature. The response and recovery time of the sensor are 4 min and 10 min, and the value of sensitivity is 4.41, respectively. Meanwhile, the CNTs/SnO₂/CuO sensor also has low detection limit, high selectivity toward H₂S, and stable performance with different concentrations of H₂S.

Construction of a novel cell-trappable fluorescent probe for hydrogen sulfide (H2S) and its bio-imaging application

Fluorescence detection of H₂S in living organisms is greatly advantageous because it is nondestructive and can be used for in situ analysis. We have constructed a novel rhodamine analogue dye (Rho630) by extending the conjugated system of rhodamine to create a novel cell-trappable H₂S fluorescent probe Rho630-AM-H₂S with red light emission. Its application for H₂S fluorescence detection in living HeLa cells and zebrafish was investigated. As expected, Rho630-AM-H₂S showed a huge fluorescence turn-on response of about 20-fold at 630 nm and good selectivity toward H₂S in solution. An MTT assay demonstrated that the probe showed negligible cytotoxicity in the concentrations typically used in fluorescence imaging experiments. Cell imaging experiments revealed that compared with compound 4 without cell-trappable unit modification, Rho630-AM-H₂S exhibited remarkably enhanced cell penetration ability, as an enormous fluorescence signal increase was observed at the red channel within 5 min after Rho630-AM-H₂S was incubated with HeLa cells. Finally, the probe Rho630-AM-H₂S was used to detect H₂S in living HeLa cells and zebrafish with great fluorescence enhancement in the red channel. Graphical abstract.

Sensitive, Selective, and Fast Detection of ppb-Level H2S Gas Boosted by ZnO-CuO Mesocrystal

ZnO-CuO mesocrystal was prepared via topotactic transformation using one-step direct annealing of aqueous precursor solution and assembled into a H2S sensor. The ZnO-CuO mesocrystal-based sensor possesses good linearity and high sensitivity in the low-concentration range (10-200 ppb). Compared to pure CuO, the as-prepared ZnO-CuO mesocrystal sensor exhibited superior H2S sensing performance with a response ranging from 8.6 to 152 % towards H2S concentrations from 10 ppb to 10 ppm when applied at the optimized working temperature of 125 °C. The sensor showed excellent repeatability and good selectivity towards H2S gas even at a concentration four orders of magnitude lower than the interfering gases, such as H2, CO2, CO, NO2, acetone, and NH3. The improved sensitivity could be attributed partially to the effective diffusion of analyte gas through the mesocrystal surface and the abundant accessible active sites. Moreover, the nanoscale p-n junctions within the mesocrystal, which could effectively manipulate the local charge carrier concentration, are also beneficial to boost the sensing performance.