Traumatic C2-C3 subluxation with atlanto-axial dislocation managed by posterior approach - A rare case report

INTRODUCTION AND IMPORTANCE

Traumatic subluxation of C2-C3 with Atlanto-Axial dislocation is very rare and uncommon condition. Only a very few case reported. What constitutes appropriate management in cases of traumatic C2-C3 subluxation with Atlato-axial dislocation is still controversial due to the infrequency of this injury. We managed a patient who had traumatic C2-C3 subluxation with Atlanto-axial dislocation following a history of trauma through posterior approach successfully.

CASE DESCRIPTION

A 45-year male day laborer presented with neck pain with progressive neurological deficit after two episodes of fall with heavy object within 1 year. Imaging revealed complete dislocation of C2 over C3 with Atlanto-Axial Dislocation. The patient was approached for posterior fixation with attempt to reduction per-operatively with skeletal traction and C1, C2, C3 joint distraction. After distraction of the joint, we achieved to do reduction of the C2-C3 and Atlanto-Axial joint. We did C1 lateral mass, C2 pedical and C3, C4 lateral mass screw and put a spacer in between C1-C2 facet joint. The patient was improved immediately after the operation. One year follow up shows, he was completely well. One year follow up shows in radiography proper alignment with fusion between C1, C2 and C3.

CLINICAL DISCUSSION

Traumatic subluxation of the C2 vertebra is due to fractures of the lamina, articular facets, pedicles, or pars interarticularis and was first described by Bouvier in1843. To the best of our knowledge there has been 3/4 cases reported till now with traumatic C2-C3 subluxation with AAD. In three similar cases before ours, one was reported to be reduced after 3 weeks of bidirectional cervical traction and another two cases were managed by open reduction and stabilization. We managed this rare case surgically successfully through posterior approach with good outcome.

CONCLUSION

Our management through posterior approach between C1 to C4 shows very good outcome with proper fusion. But it needs proper understanding the anatomy and mechanism of reduction by careful reading the image. Its needs more case description and management to establish a standard treatment for this type of disease.

Minimally invasive percutaneous new designed transpedicular lag-screw fixation for the management of Hangman fracture using O-arm-based navigation: a clinical study

BACKGROUND

To investigate the outcomes and safety of using minimally invasive percutaneous new transpedicular lag-screw fixation with intraoperative, full rotation, three-dimensional image (O-arm)-based navigation for the management of Hangman fracture.

METHODS

Twenty-two patients with Hangman fracture were treated with minimally invasive percutaneous new transpedicular lag-screws using intraoperative, full rotation, and three-dimensional image (O-arm)-based navigation. The preoperative and postoperative conditions of the patients were evaluated according to the ASIA (American Spinal Injury Association) scale. The patient's VAS (visual analog scale) scores before and after surgery, operation time, cervical vertebral activity, intervertebral angle and bone healing were recorded and collected, and repeated measures analysis of variance was used for statistical analysis.

RESULTS

All patients were satisfactorily repositioned after surgery, and the VAS scores for neck pain were significantly lower than those before surgery on the first day and at 1 month, 3 months and the last follow-up (P < 0.001). According to the ASIA scale, four patients recovered from preoperative grade D to postoperative grade E. Bony fusion was achieved for all cases, and the range of neck rotation was restored to normal at the last follow-up. The post-surgery angular displacement (AD) demonstrated the stability of C2-3 after our new screw fixation for the treatment of Hangman fracture.

CONCLUSIONS

Minimally invasive percutaneous new transpedicular lag-screw fixation using intraoperative, full rotation, three-dimensional image (O-arm)-based navigation achieved satisfactory clinical results with the advantages of immediate stability, safety and effectivity. We suggest that it is a reliable and advanced technique for the management of Hangman fracture.

Robot-assisted percutaneous pars-pedicle screw fixation for treating Hangman's fracture

BACKGROUND

This study aimed to evaluate the safety and efficacy of robot-assisted percutaneous pars-pedicle screw fixation surgery for treating Hangman's fracture.

METHODS

The study involved 33 patients with Hangman's fracture who underwent robot-assisted fixation surgery using cannulated pars-pedicle screws through a percutaneous approach. The primary parameter evaluated was the accuracy of the screws according to the Gertzbein-Robbins scale, using postoperative CT images. Secondary parameters included the duration of surgery, intraoperative blood loss, postoperative hospital stay, and neurovascular injury.

RESULTS

A total of 60 pars-pedicle screws were placed in 33 patients. Based on the Levine and Edwards classification, the patients included 12 cases of type I, 15 cases of type II, five cases of type IIa, and one atypical case. The average operative time was 92.4 ± 37.4 min, and the average blood loss was 22.4 ± 17.9 ml. Fifty-five of 60 screws were successfully placed within the bone. No screw-related neurovascular injury was observed, and satisfactory reduction was achieved in all cases.

CONCLUSION

Robot-assisted percutaneous pars-pedicle screw fixation is a safe and feasible method for treating Hangman's fracture.

TRIAL REGISTRATION

The study was retrospectively registered and approved by our center's institutional review board.

Direct Transpedicular C2 Fixation for the Surgical Management of Hangman's Fractures: A "Second Youth" for the Judet Approach

PURPOSE

The optimal management of hangman's fractures is controversial and the standard of care has been neither established nor supported by strong evidence. The Judet approach has been introduced in 1970 as surgical option to treat selected cases of hangman's fractures, harboring the advantage to preserve motion of the craniovertebral junction and to restore the C2 vertebra anatomy by insertion of transpedicular screws through the fracture line. This paper reviews the literature on hangman's fractures surgically managed by Judet approach, and reports two new illustrative cases.

METHODS

The PubMed database was searched for the review process. After initial screening of abstracts and papers, 13 manuscripts were included in the present review.Two cases of hangman's fractures, a Levine-Edwards type I and a type IIA, respectively, treated with direct transpedicular C2 screw fixation are reported. Surgical steps of the Judet approach are also described.

RESULTS

Our literature review revealed that the technique described by Judet is gaining appeal only in recent years and there is no consensus on surgical indications.No surgery-related complications were observed in the two reported cases. Patients experienced a significant reduction of neck pain postoperatively. Motion of craniovertebral junction was preserved in both patients at 3-, 6-, and 12-month follow-ups.

CONCLUSIONS

Direct transpedicular osteosynthesis of C2-pars interarticularis fracture has been already demonstrated as effective in type II and IIA hangman's fractures. The application of such technique in selected patients with atypical type I fractures should also be considered in order to achieve early mobilization and avoid external fixation.

Surgical Management of Adult Traumatic Atlantoaxial Rotatory Fixation with Hangman Fracture: Case Report and Literature Review

Atlantoaxial rotatory fixation (AARF) is a rare type of adult cervical spine injury. The classic symptoms are painful torticollis and limited neck range of motion. To avoid catastrophic consequences, early diagnosis is necessary. The present study presents the successful treatment of a scarce case of adult AARF with a Hangman fracture and a comprehensive literature review. A 25-year-old man presented to the trauma bay with left-sided torticollis after a motor vehicle accident. Cervical computed tomography scans revealed type I AARF. Torticollis resolved after cervical traction with partial reduction, and posterior C1-C2 fusion was performed as part of the therapy. Recognition of AARF after trauma requires a high index of suspicion, and early diagnosis is critical for the achievement of the best possible patient outcomes. Since the combination of a Hangman fracture and C1-C2 rotatory fixation is complex and unique, it must be tailored to the associated injuries.

New Trend in Craniovertebral Junction Surgical Strategy: Technical Note for the Treatment of Hangman's Fractures Through a Minimally Invasive Approach

INTRODUCTION

The reduction, stabilization, and maintenance of alignment are the main goals in the surgical treatment of unstable hangman's fractures. The choice of the surgical strategy remains poorly standardized; anterior and/or posterior fusion could be performed; and none of the available clinical studies in the literature have shown significant differences in outcomes or complication rates. Vertebral anatomy, age, comorbidities, patient factors, and surgical experience may guide the treatment choice.

METHODS

We present a case of a polytraumatized young woman with an unstable hangman's fracture type II, according to Levine-Edwards classification. We treated the fracture by using a plate with four holes to fix C2-C3 without discectomy and body fusion.

RESULTS

We performed a small incision, such as those used for the fixation of odontoid screws, where the working angle allowed us to easily and quickly position the plate by using a minimally invasive approach.

CONCLUSION

The stabilization alone, without discectomy and body fusion with the cage, in the same way favored the natural healing of the bone fracture. In our opinion, in some select cases, fixation of C2-C3 alone through a minimally invasive approach allows for bone healing with fewer risks and an easier surgery.

Intraoperative color-coded duplex ultrasound for safe surgical reduction of displaced hangman fractures in patients with atypical course of the vertebral artery: A case report of two patients

An atypical course of the vertebral artery can be medically relevant in displaced Hangman fractures, especially if the artery course runs within the fracture gap of the C2 isthmus. During surgical reduction, the artery can be occluded inside the fracture, potentially leading to ischemic conditions of the brain. The aim of this study was to report two cases according to the CARE (case reporting) guidelines, in which intraoperative color-coded duplex-ultrasound was performed to secure safe surgical reduction of hangman fractures in two patients with an atypical course of the vertebral artery. Two patients with displaced hangman fractures (Effendi-Levine type II) were diagnosed with an atypical course of the vertebral artery running inside the fracture gap. This endangered safe surgical management with the risk of iatrogenic occlusion or injury during reduction through entrapment of the vessel inside the fracture gap. Therefore, an intraoperative color-coded duplex-ultrasound of the vertebral artery was conducted before and after reduction of the fracture, as well as at the end of the surgery. The surgical treatment in both cases included posterior unilateral spondylodesis, followed by anterior cervical discectomy and fusion (ACDF). In both patients, a safe reduction of the fracture was performed. Neither occlusion nor dissection of the vertebral artery occurred. The duplex ultrasound before and after reduction, and at the end of the procedure showed normal blood flow and morphology of both vertebral arteries. At follow-up examinations, the patients showed a favorable clinical outcome, radiographic signs of fusion, and no irregularity of the vertebral arteries. This case report serves as proof-of-concept, demonstrating the feasibility of this regimen to minimize the risk of entrapment or occlusion of the vertebral artery in the surgical management of displaced Hangman fractures with atypical course of the vertebral artery running inside the fracture gap.

Unstable Hangman Fracture Complicated by Vertebral-Venous Fistula: Surgical Considerations and Review of Literature

BACKGROUND

Hangman fracture or traumatic spondylolisthesis of the axis associated with a traumatic vertebral venous fistula (VVF) is a rare entity and sparsely reported in literature. Standard recommendations for management of such rare and complex scenarios are not available and hence the strategy has to be individualized on a case-by-case basis.

METHODS

We report a 70-year-old man having an unstable hangman fracture with VVF. Both pathologies were simultaneously managed uniquely. The VVF was managed by endovascular occlusion. The fracture was managed by anterior fusion alone as posterior fusion was deemed riskier in the aftermath of a recently occluded VVF. The patient had good neck function and bony fusion at 1-year follow-up.

CONCLUSION

This case report emphasizes the need for timely recognition and management of a VVF, which can rarely coexist with hangman fracture, and discusses the interesting surgical paradigms in the management. We also present a review of literature.

Min-invasive surgical treatment for multiple axis fractures: A case report

BACKGROUND

Fractures of the axis are commonly seen in spinal injuries. Upper cervical fractures are usually managed conservatively. However, the complications due to long-term external immobilization cannot be ignored. The traditional open surgery has the disadvantages of too much blood loss and soft tissue injury. The aim of our paper is to introduce a minimally invasive surgical treatment for multiple axis fractures.

CASE SUMMARY

We report a 40-year-old Chinese male who had severe neck pain and difficult neck movement after falling from 3 meters. X-ray and computed tomography (CT) scan revealed an axis injury consisting of an odontoid Type III fracture associated with a Hangman fracture categorized as a Levine-Edwards Type I fracture. The patient underwent anterior odontoid screw fixation and posterior percutaneous screw fixation using intraoperative O-arm navigation. Neck pain was markedly improved after surgery. X-rays and CT scan reconstructions of 3-mo follow-up showed good stability and fusion. The range of cervical motion was well preserved.

CONCLUSION

Anterior odontoid screw fixation and posterior direct C2 percutaneous pedicle screw fixation with the aid of O-arm navigation and neurophysiological monitoring can be an interesting alternative option for complicated multiple axis fractures.

[Biomechanical study of different kinds of internal fixation for the typeⅠ Hangman fracture, type Ⅱ odontoid fracture and the C(2/3) disc injury: a finite-element analysis]

Objectives: To analyze the biomechanical stability of four kinds of internal fixation for the type Ⅰ Hangman fracture, type Ⅱ odontoid fracture and the C(2/3) disc injury by finite element (FE) analysis. Methods: Thin-section spiral computed tomography (0.5 mm) was performed on C(1) to C(3) region of cervical vertebra in healthy male volunteers.A three-dimensional hexahedral FE model of upper cervical spine was established by software (Mimics, GEOMAGICS, Pro/E and Ansys). Then the weakening of the strength of grid was performed to simulate the FE model of the type Ⅰ Hangman fracture, type Ⅱ odontoid fracture and the C(2/3) disc injury (FE/Fracture), the four internal fixation models: anterior cervical plate+ odontoid screw+ cage (FE/ACP+ OS+ cage), affixing rods from pedicle screws in C(2) to lateral mass screws in C(3)+ odontoid screw + cage (FE/C(2)PS+ C(3)LMS+ OS+ cage), affixing rods from pedicle screws in C(1) to pedicle screws in C(2) and lateral mass screws in C(3) (FE/C(1)PS+ C(2)PS+ C(3)LMS), anterior odontoid screw plate fixation system (FE/AOSP) were simulated on the FE/Fracture model.Flexion, extension, lateral bending and axial rotation were imposed on the FE/Intact, FE/Fracture and the four fixation models respectively. Results: The intact model of upper cervical spine (C(1)-C(3)) was established successfully, consisting of 259 641 nodes and 403 674 units.There was no significant difference among the FE/ACP+ OS+ cage, the FE/ C(2)PS+ C(3)LMS+ OS+ cage and the FE/AOSP of ROMC(1/2).During flexion, extension, left axial rotation and right axial rotation of ROMC(2)-C(3), the FE/AOSP decreased 70.7%, 74.4%, 38.9%, 41.1% respectively compared with the FE/C(1)PS+ C(2)PS+ C(3)LMS.The ROMC(2)-C(3) during flexion, extension, left lateral bending, right lateral bending, left axial rotation and right axial rotation in the FE/AOSP decreased for 82.2%, 82.8%, 73.2%, 64.8%, 72.2%, 81.5% respectively when compared with those in FE/ACP+ OS+ cage.The ROMC(2)-C(3) during flexion, extension, left lateral bending, right lateral bending, left axial rotation and right axial rotation in the FE/AOSP decreased 88.2%, 81.2%, 47.6%, 41.2%, 38.9%, 39.0% respectively when compared with those in FE/C(2)PS+ C(3)LMS+ OS+ cage.The stress concentrated on the connection between plate and screw in the FE/ACP+ OS+ cage, the FE/C(2)PS+ C(3)LMS+ OS+ cage and the FE/C(1)PS+ C(2)PS+ C(3)LMS, while it distributed evenly in the FE/AOSP. Conclusion: Anterior odontoid screw plate fixation system can be used to treat the type Ⅰ Hangman fracture, type Ⅱ odontoid fracture, and the C(2/3) disc injury and can reserve the function of atlanto-axial joint.

Traumatic atlantoaxial dislocation with Hangman fracture

BACKGROUND CONTEXT

Traumatic bilateral-atlantoaxial dislocations are rare injuries. Hangman fractures, conversely, represent 4% to 7% of all cervical fractures and frequently involve a combination C1-C2 fracture pattern. Presently, there is no report in the English literature of a traumatic C2-spondylolisthesis associated with a C1-C2 rotatory dislocation. This injury complex cannot be cataloged using current classification schemes and no established treatment recommendations exist.

PURPOSE

To report a unique case of a Hangman fracture associated with bilateral C1-C2 rotatory-dislocation, which does not fit into existing classification systems, and discuss our treatment approach.

STUDY DESIGN

A clinical case report and review of the literature.

METHODS

Chart review and analysis of relevant literature. There were no study-specific conflicts of interest.

RESULTS

A 26-year-old man sustained a traumatic C2-spondylolisthesis along with C1-C2 rotatory subluxation in an automobile collision. The patient was originally placed in a halo crown and vest and then taken for an open reduction and stabilization through a posterior approach for persistent C1-C2 subluxation. The patient is currently 16 months postoperative and back to work as a plumber.

CONCLUSIONS

The injury complex encountered cannot be described using the available classification systems. Our treatment included initial stabilization with halo placement, followed by a posterior C1, C2, and C3 segmental reduction and fixation resulting in radiographic fusion and a good clinical outcome.