Molecular simulations guide immobilization of lipase on nest-like ZIFs with regulatable hydrophilic/hydrophobic surface

The catalytic performance of immobilized lipase is greatly influenced by functional support, which attracts growing interest for designing supports to achieve their promotive catalytic activity. Many lipases bind strongly to hydrophobic surfaces where they undergo interfacial activation. Herein, the behavioral differences of lipases with distinct lid structures on interfaces of varying hydrophobicity levels were firstly investigated by molecular simulations. It was found that a reasonable hydrophilic/hydrophobic surface could facilitate the lipase to undergo interfacial activation. Building on these findings, a novel "nest"-like superhydrophobic ZIFs (ZIFN) composed of hydrophobic ligands was prepared for the first time and used to immobilize lipase from Aspergillus oryzae (AOL@ZIFN). The AOL@ZIFN exhibited 2.0-folds higher activity than free lipase in the hydrolysis of p-Nitrophenyl palmitate (p-NPP). Especially, the modification of superhydrophobic ZIFN with an appropriate amount of hydrophilic tannic acid can significantly improve the activity of the immobilized lipase (AOL@ZIFN-TA). The AOL@ZIFN-TA exhibited 30-folds higher activity than free lipase, and still maintained 82% of its initial activity after 5 consecutive cycles, indicating good reusability. These results demonstrated that nanomaterials with rational arrangement of the hydrophilic/hydrophobic surface could facilitate the lipase to undergo interfacial activation and improve its activity, displaying the potential of the extensive application.

Calcium-based MOFs as scaffolds for shielding immobilized lipase and enhancing its stability

The enzyme immobilization technology has become a key tool in the field of enzyme applications; however, improving the activity recovery and stability of the immobilized enzymes is still challenging. Herein, we employed a magnetic carboxymethyl cellulose (MCMC) nanocomposite modified with ionic liquids (ILs) for covalent immobilization of lipase, and used Ca-based metal-organic frameworks (MOFs) as the support skeleton and protective layer for immobilized enzymes. The ILs contained long side chains (eight CH2 units), which not only enhanced the hydrophobicity of the carrier and its hydrophobic interaction with the enzymes, but also provided a certain buffering effect when the enzyme molecules were subjected to compression. Compared to free lipase, the obtained CaBPDC@PPL-IL-MCMC exhibited higher specific activity and enhanced stability. In addition, the biocatalyst could be easily separated using a magnetic field, which is beneficial for its reusability. After 10 cycles, the residual activity of CaBPDC@PPL-IL-MCMC could reach up to 86.9%. These features highlight the good application prospects of the present immobilization method.

Tailoring the interfacial microenvironment of magnetic metal-organic frameworks using amino-acid-based ionic liquids for lipase immobilization

Modifying the carrier interface is a promising method to improve the microenvironment of immobilized enzymes and enhance their activity and stability. In this work, using proline as amino acid, magnetic metal-organic frameworks (MOFs) were modified with an amino-acid-based ionic liquid (AAIL) with two hydroxyl groups followed by adsorption of porcine pancreatic lipase (PPL). The activity recovery of the prepared immobilized lipase (MMOF-AAIL/PPL) was up to 162 % higher than that of MMOF-PPL (70.8 %). The Michaelis constant of MMOF-AAIL/PPL was 0.0742 mM lower than that of MMOF-PPL, but the catalytic efficiency was 0.0223 min-1 which was higher than MMOF-PPL. Furthermore, MMOF-AAIL/PPL maintained 85.6 % residual activity after stored for 40 days and its residual activity was 71.9 % while that for MMOF-PPL was 58.8 % after incubated in 6 M urea for 2 h. Particularly, after ten consecutive cycles, the residual activity of MMOF-AAIL/PPL still reached 84.4 %. In addition, the magnetic properties of the support facilitate the separation process which improves the utilization efficiency of immobilized enzymes.

Covalent immobilization of lipase on magnetic biochar for one-pot production of biodiesel from high acid value oil

Magnetic biochar was synthesized via chelation of Fe3+ with carboxymethyl cellulose and pyrolysis for covalently immobilizing Eversa® Transform lipase. The magnetic biochar had 75.8 mg/g lipase loading that was 54.1 % higher than that without magnetism. The immobilized lipase achieved 91.3 mg/g lipase loading with 19.2 U/mg lipase activity after optimization. It showed good thermal and acid stability with 82.5 % and 98.2 % relative activity at 45 °C and pH 4, respectively. Its relative activity was 90.8 % after stored for 30 d at 4 °C. After magnetically separated for 10 cycles, it still kept 70.1 % activity due to the strong covalent bonding. The lipase further catalyzed one-pot esterification and transesterification of high acid value oil (38 mg KOH/g) with 95.7 % biodiesel yield and cycled for 10 times at 85.7 % yield. Kinetic study gave the activation energy of 28.7 kJ/mol. The covalently immobilized lipase could find practical applications.

Tuning surface interactions on MgFe2O4 nanoparticles to induce interfacial hyperactivation in Candida rugosa lipase immobilization

Lipase adsorption on solid supports can be mediated by a precise balance of electrostatic and hydrophobic interactions. A suitable fine-tuning could allow the immobilized enzyme to display high catalytic activity. The objective of this work was to investigate how pH and ionic strength fluctuations affected protein-support interactions during immobilization via physical adsorption of a Candida rugosa lipase (CRL) on MgFe2O5. The highest amount of immobilized protein (IP) was measured at pH 4, and an ionic strength of 90 mM. However, these immobilization conditions did not register the highest hydrolytic activity (HA) in the biocatalyst (CRLa@MgFe2O4), finding the best values also at acidic pH but with a slight shift towards higher values of ionic strength around 110 mM. These findings were confirmed when the adsorption isotherms were examined under different immobilization conditions so that the maximum measurements of IP did not coincide with that of HA. Furthermore, when the recovered activity was examined, a strong interfacial hyperactivation of the lipase was detected towards acidic pH and highly charged surrounding environments. Spectroscopic studies, as well as in silico molecular docking analyses, revealed a considerable involvement of surface hydrophobic protein-carrier interactions, with aromatic aminoacids, especially phenylalanine residues, playing an important role. In light of these findings, this study significantly contributes to the body of knowledge and a better understanding of the factors that influence the lipase immobilization process on magnetic inorganic oxide nanoparticle surfaces.

Simulation insights into the lipase adsorption on zeolitic imidazolate framework-8

Zeolitic imidazolate frameworks (ZIFs) have recently emerged as immobilization matrices for biomolecules, most notably enzymes. Understanding the key factors that dominate the enzyme's catalytic activity on/in ZIFs is crucial for the development of new immobilization matrices. In this work, a combination of the parallel tempering Monte Carlo simulation and all-atom molecular dynamics simulation is performed to study the orientation and conformation of the Candida rugose lipase (CRL) adsorbed on oppositely charged and neutral ZIF-8 (i.e., ZIF-8-COOH, ZIF-8-NH2, and ZIF-8-neutral) surfaces. The results show that CRL could adsorb on all ZIF-8 surfaces, with an ordered orientation obtained on charged ZIF-8 surfaces. ZIF-8-NH2 is a good candidate for CRL immobilization since it can maximize the catalytic activity of CRL. The native conformation of CRL is well preserved on all three surfaces due to the partially water-containing surface of ZIF-8. The results could provide theoretical support for the application of porous materials in enzyme immobilization.

Effect of Glutaraldehyde Multipoint Covalent Treatments on Immobilized Lipase for Hydrolysis of Acidified Oil

Immobilized lipase is a green and sustainable catalyst for hydrolysis of acidified oil. Glutaraldehyde is widely used for lipase immobilization while the appropriate strategy optimizes the catalytic performance of lipase. In this research, lipase from Candida rugosa (CRL) was immobilized on spherical silica (SiO2) by glutaraldehyde multipoint covalent treatments, including covalent binding method and adsorption-crosslinking method. The enzymatic stability properties and performance in hydrolysis of refined oil and acidified oil were studied. We confirmed that the residual activity decreased while the stability increased because of the influence on secondary structure of lipase after multipoint covalent treatments. In the comparison of different immobilization strategies in multipoint covalent treatment, SiO2-CRL (covalent binding method) showed lower loading capacity than SiO2-CRL (adsorption-crosslinking method), resulting in low activity. However, SiO2-CRL (covalent binding method) showed better reusability and stability. Immobilized lipase via covalent binding method was more potential in the application of catalytic hydrolysis of acidified oils.

Immobilized lipase for sustainable hydrolysis of acidified oil to produce fatty acid

Acidified oil is obtained from by-product of crops oil refining industry, which is considered as a low-cost material for fatty acid production. Hydrolysis of acidified oil by lipase catalysis for producing fatty acid is a sustainable and efficient bioprocess that is an alternative of continuous countercurrent hydrolysis. In this study, lipase from Candida rugosa (CRL) was immobilized on magnetic Fe₃O₄@SiO₂ via covalent binding strategy for highly efficient hydrolysis of acidified soybean oil. FTIR, XRD, SEM and VSM were used to characterize the immobilized lipase (Fe₃O₄@SiO₂-CRL). The enzyme properties of the Fe₃O₄@SiO₂-CRL were determined. Fe₃O₄@SiO₂-CRL was used to catalyze the hydrolysis of acidified soybean oil to produce fatty acids. Catalytic reaction conditions were studied, including amount of catalyst, reaction time, and water/oil ratio. The results of optimization indicated that the hydrolysis rate reached 98% under 10 wt.% (oil) of catalyst, 3:1 (v/v) of water/oil ratio, and 313 K after 12 h. After 5 cycles, the hydrolysis activity of Fe₃O₄@SiO₂-CRL remained 55%. Preparation of fatty acids from high-acid-value by-products through biosystem shows great industrial potential.

The preparation of Diacylglycerol-rich soybean oil by acetylated modification of arachin nanoparticles for W/O Pickering emulsion system

Pickering emulsion catalytic system (PEC) stabilized by nanoparticles is an efficient catalytic platform. Herein, a high-performance PEC was constructed by acetylated modification of arachin nanoparticles (AAPs). The results showed the pI of arachin was decreased from pH 5.5 to pH 3.5. The surface hydrophobicity index was significantly increased (from 56.28 ± 4.23 to 120.77 ± 0.79) after acetylated modification. The three-phase contact angle of AAPs was 91.20 ± 0.98°. AAPs were used as lipase immobilization carriers to increase the activity of free lipase fabricating lipase-AAPs. The immobilization efficiency and activity of lipase-AAPs were 12.95 ± 0.03% and 1.74 ± 0.07 U/mg, respectively. Enzymatic reaction kinetics showed that V_m of lipase-AAPs was twice of free lipase. K_m was 1/5 of free lipase. The catalytic efficiency of PEC to prepare DAG was 2.36 times of biphasic catalytic system (BCS). This work provided a promising way to promote the efficiency of DAG preparation.

Process optimization for enzymatic production of a valuable biomass-based ester from levulinic acid

The enzymatic production of isoamyl levulinate via esterification of isoamyl alcohol (IA) and levulinic acid (LA), a biomass-based platform chemical with attractive properties, in a solvent system has been performed in this study. For such a purpose, a low-cost liquid lipase (Eversa^® Transform 2.0) immobilized by physical adsorption via hydrophobic interactions (mechanism of interfacial activation) on mesoporous poly(styrenene-divinylbenzene) (PSty-DVB) beads was used as heterogeneous biocatalyst. It was prepared at low ionic strength (5 mmol.L^-1 buffer sodium acetate pH 5.0) and 25 ℃ using an initial protein loading of 40 mg.g^-1 of support. Maximum protein loading of 31.2 ± 2.8 mg.g^-1 of support and an immobilization yield of 83% was achieved. The influence of relevant factors (biocatalyst concentration and reaction temperature) on ester production was investigated using a central composite rotatable design (CCRD). Maximum acid conversion percentage of 65% was achieved after 12 h of reaction at 40 °C, 20% of mass of heterogeneous biocatalyst per mass of reaction mixture (20% m.m^-1), and LA:IA molar ratio of 1:1.5 in a methyl isobutyl ketone (MIBK) medium. The biocatalyst retained around of 30% of its initial activity after five consecutive esterification batches under optimal experimental conditions. The proposed experimental procedure can be considered as an acceptable green process (EcoScale score of 66.5), in addition to the fact that a new strategy is proposed to sustainably produce a valuable industrial ester (isoamyl levulinate) from biomass-based materials using an immobilized and low-cost commercial lipase as catalyst.

Immobilization of Rhizomucor miehei lipase on magnetic multiwalled carbon nanotubes towards the synthesis of structured lipids rich in sn-2 palmitic acid and sn-1,3 oleic acid (OPO) for infant formula use

Nowadays, breast milk is considered as the ideal food for infants owing to the most common oleic acid-palmitic acid-oleic acid (OA-PA-OA) fatty acid distribution of the human milk fat (HMF). This study reports the synthesis of 1,3-dioleoyl-2-palmotoylglycerol (OPO)-rich human milk fat substitutes in a two-step enzymatic acidolysis reaction with Rhizomucor miehei lipase (RML) immobilized on magnetic multi-walled carbon nanotubes(mMWCNTs). The immobilized RML (RML-mMWCNTs) showed better thermal and pH stability, convenient recovery and reusability than the free soluble form. Under optimized reaction conditions (1:8 tripalmitin (PPP)/OA, 10%wt. enzyme, 50 °C, 5 h), PA content at the sn-2 position and OA incorporation at the sn-1,3 positions reached 93.46% and 59.54%, respectively. Comparison tests have also showed that RML-mMWCNTs has better catalytic activity and reusability than the commercial lipase Lipozyme RM IM. The results suggest that RML-mMWCNTs is a promising biocatalyst for the synthesis of OPO-rich TAGs with potential use in infant formulas.

Hydroxyapatite/Glycyrrhizin/Lithium-Based Metal-Organic Framework (HA/GL/Li-MOF) Nanocomposite as Support for Immobilization of Thermomyces lanuginosus Lipase

The hydroxyapatite/glycyrrhizin/lithium-based metal-organic framework (HA/GL/Li-MOF) nanocomposites were synthesized via the hydrothermal method in the presence of lecithin and glycyrrhizin. Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), and scanning electron microscopy (SEM) equipped with energy-dispersive X-ray spectroscopy (EDS) were applied for characterization of the fabricated nanocomposites. The HA/GL/Li-MOF and Li-MOF nanocomposites were employed as support for immobilization of Thermomyces lanuginosus lipase (TLL). The Plackett-Burman and Box-Behnken designs were used for screening and optimizing of variables affecting the immobilization conditions, respectively. The optimum specific activity of immobilized TLL on HA/GL/Li-MOF and Li-MOF nanocomposites (41.8 ± 1.2 U/mg and 39.4 ± 3.1 U/mg, respectively) was predictably determined at support concentration of 0.5 mg/mL, glutaraldehyde concentration of 5 mM, and enzyme activity of 20 U/mg, while the specific activities of TLL@ HA/GL/Li-MOF and TLL@Li-MOF were experimentally found to be 39.5 ± 3.7 U/mg and 38.5 ± 2.3 U/mg, respectively. The stability results showed that the TLL@ HA/GL/Li-MOF has suitable stability against pH and thermal denaturation. However, the immobilized TLL on Li-MOF represented lower stability compared with that of the HA/GL/Li-MOF. The immobilized TLL on HA/GL/Li-MOF maintained near 70% of its original activity after 15 days' storage and during 5 runs of application. In addition, TLL@HA/GL/Li-MOF exhibited higher enzyme-substrate affinity (K_m, 10.1 mM) compared to that of TLL@Li-MOF (K_m, 23.4 mM). Therefore, these findings demonstrated the potential use of HA/GL/Li-MOF nanocomposites for enzyme immobilization.

Enhanced enzymatic performance of immobilized lipase on metal organic frameworks with superhydrophobic coating for biodiesel production

Inspired by the interfacial catalysis of lipase, Herein, the hydrophobic ZIF-L coated with polydimethylsiloxane (PDMS) were prepared by chemical vapor deposition (CVD) and used to immobilize lipase from Aspergillus oryzae (AOL) for biodiesel production. The results showed that the PDMS coating enhanced the stability of ZIF-8 and ZIF-L in PBS. Immobilization efficiency of AOL on PDMS-modified ZIF-L was 96% under optimized conditions. The resultant immobilized lipase (AOL@PDMS-ZIF-L) exhibited higher activity recovery (430%) than AOL@ZIF-L. Meanwhile, compared with free lipase, the AOL@PDMS-ZIF-L exhibited better storage stability and thermal stability. After 150 days of storage, the free lipase retained only 20% of its original activity of hydrolyzing p-NPP, while the AOL@PDMS-ZIF-L still retained 90% of its original activity. The biodiesel yield catalyzed from soybean oil by free lipase was only 69%, However, the biodiesel yield by AOL@PDMS-ZIF-L reached 94%, and could still be maintained at 85% even after 5 consecutive cycles. It is believed that this convenient and versatile strategy has great promise in the important fields of immobilized lipase on MOF for biodiesel production.

Lipase immobilization on glutaraldehyde activated graphene oxide/chitosan/cellulose acetate electrospun nanofibrous membranes and its application on the synthesis of benzyl acetate

In this research, lipase Km12 was immobilized on the glutaraldehyde-activated graphene oxide/chitosan/cellulose acetate nanofibers (GO/Chit/CA NFs) prepared by the electrospinning method. This immobilized lipase exhibited a higher activity value than the free lipase in the acidic pH region. This enzyme showed a 10 °C shift in the maximum temperature activity. Results displayed that the Vmax value of NFs-lipase was 0.64 µmol/min, while it was gained 0.405 µmol/min for the free lipase. The activity of NFs-lipase was reserved 100% after 10 min maintaining at 60 °C, in which the free lipase only kept 75% of its original activity. Moreover, a 20% enhancement in the lipase activity was observed for NFs-lipase after 180 min of incubation at 60 °C, compared to the free enzyme. Reusability studies exhibited that the immobilized lipase well-kept 80% of its original activity after 10 cycles of reusing. Results displayed that 14% of the protein was leaked from NFs-lipase at the same condition. Transesterification results indicated that the free lipase exhibited 65% and 85% conversation level of benzyl acetate after 12 and 24 h of incubation. Besides, the immobilized lipase showed 80% and 95% conversation level at the same condition. These results indicated the high performance of free and immobilized lipase in the production of benzyl acetate for applications in the perfume and cosmetic industries.

Ethanol as additive enhance the performance of immobilized lipase LipA from Pseudomonas aeruginosa on polypropylene support

Immobilization is practical to upgrade enzymes, increasing their performance and expanding their applications. The recombinant, solvent tolerant lipase LipA PSA01 from Pseudomonas aeruginosa was immobilized on polypropylene Accurel® MP1004 to improve its performance. We investigated the effect of ethanol as an additive during the immobilization process at three concentrations (20%, 25%, and 30%) on the operational behavior of the enzyme. The immobilization efficiency was higher than 92%, and the immobilized enzymes showed hyperactivation and thermal resistance depending on the concentration of ethanol. For example, at 70 °C, the free enzyme lost the activity, while the prepared one with ethanol 25% conserved a residual activity of up to 73.3% (∆ T¹⁵ ₅₀ = 27.1 °C). LipA immobilized had an optimal pH value lower than that of the free enzyme, and the organic solvent tolerance of the immobilized enzymes depended on the ethanol used. Hence, the immobilized enzyme with ethanol 25% showed hyperactivation to more solvents than the soluble enzyme. Remarkable stability towards methanol (up to 8 folds) was evidenced in all the immobilized preparations. The immobilized enzyme changed their chemo preference, and it hydrolyzed oils preferentially with short-chain than those with long-chain. LipA had a notable shelf-life after one year, keeping its activity up to 87%. Ethanol facilitated the access of the enzyme to the hydrophobic support and increased its activity and stability according to the amount of ethanol added.

Optimization of immobilization of Pseudomonas cepacia lipase on multiwalled carbon nanotubes functionalized with glycyrrhizin and Tween 80

In the present study, multiwalled carbon nanotubes (MWCNTs) were functionalized with glycyrrhizin and Tween 80 and applied for immobilization of Pseudomonas cepacia lipase (PcL). Characterization of f-MWCNTs was performed through Fourier-transform infrared spectroscopy, thermal gravimetric, field emission scanning electron microscopy, and energy-dispersive X-ray spectroscopy analysis. The optimum specific activity of immobilized PcL (studied by Plackett-Burman statistical design) occurred at 0.3 mg/mL of f-MWCNTs, 25 mM of phosphate buffer (pH 6.0), 15 min sonication time, 8 U/mL of enzyme concentration, and 24 h immobilization time at 4 °C in the absence of glutaraldehyde. In these conditions, the specific activity was 16.57 ± 0.71 U/mg, which was very close to the predicted amount (16.62 ± 0.64 U/mg). The results of thermal and pH stability showed that the stability of immobilized PcL was higher than that of the free PcL. The activity of immobilized PcL on f-MWCNTs held 93% after being incubated for 60 min at 70 °C. Moreover, the immobilized PcL on f-MWCNTs retained about 65% of its initial activity after 30 days of storage at 25 °C. In addition, about 50% of initial activity of immobilized PcL retained after 10 cycles of uses. Therefore, f-MWCNTs could be introduced as suitable support for enzymes immobilization.

Covalent immobilization of lipase from Candida rugosa on epoxy-activated cloisite 30B as a new heterofunctional carrier and its application in the synthesis of banana flavor and production of biodiesel

In this paper, an epoxy-activated cloisite (ECL) was prepared as a new heterofunctional carrier via a reaction between cloisite 30B (CL) and epichlorohydrin and utilized for covalent immobilization of lipase from Candida rugosa. The lipase immobilized on the ECL (LECL) was successfully used in the olive oil hydrolysis, synthesis of isoamyl acetate (banana flavor), and biodiesel production. The TGA, FT-IR, SEM, and XRD were used to characterize CL, ECL, and LECL. The influences of temperature, pH, thermal stability, and storage capacity were examined in the olive oil hydrolysis. The effects of solvent, temperature, time, water content, and substrates molar ratio on the yields of ester and biodiesel were also investigated. In the optimized conditions, the hydrolytic activity of LECL was 1.85 ± 0.05 U/ mg, and the maximum yield of ester and biodiesel was 91.6% and 95.4%, respectively. The LECL showed good thermal stability and storage capacity compared to the free lipase. Additionally, LECL was reusable for both esterification and transesterification after being used for nine cycles.

Immobilization of lipase Eversa Transform 2.0 on poly(urea-urethane) nanoparticles obtained using a biopolyol from enzymatic glycerolysis

In this work, the free lipase Eversa^® Transform 2.0 was used as a catalyst for enzymatic glycerolysis reaction in a solvent-free system. The product was evaluated by nuclear magnetic resonance (¹H NMR) and showed high conversion related to hydroxyl groups. In sequence, the product of the glycerolysis was used as stabilizer and biopolyol for the synthesis of poly(urea-urethane) nanoparticles (PUU NPs) aqueous dispersion by the miniemulsion polymerization technique, without the use of a further surfactant in the system. Reactions resulted in stable dispersions of PUU NPs with an average diameter of 190 nm. After, the formation of the PUU NPs in the presence of concentrated lipase Eversa^® Transform 2.0 was studied, aiming the lipase immobilization on the NP surface, and a stable enzymatic derivative with diameters around 231 nm was obtained. The hydrolytic enzymatic activity was determined using ρ-nitrophenyl palmitate (ρ-NPP) and the immobilization was confirmed by morphological analysis using transmission electron microscopy and fluorescence microscopy.

Immobilization of Thermoalkalophilic Lipase from Bacillus atrophaeus FSHM2 on Amine-Modified Graphene Oxide Nanostructures: Statistical Optimization and Its Application for Pentyl Valerate Synthesis

Synthesis of (3-aminopropyl) triethoxysilane (APTES)-functionalized graphene oxide (GO) nanosheets, statistical optimization of conditions for immobilization of Bacillus atrophaeus lipase (BaL) on as-synthesized support, and application of the immobilized BaL for esterification of valeric acid were carried out in this investigation. The optimum specific activity of the immobilized BaL (81.60 ± 0.28 U mg^-1) was achieved at 3 mg mL^-1 of GO-NH₂, 50 mM of phosphate buffer, pH 7.0, 60 min sonication time, 100 mM glutaraldehyde, 25 U mL^-1 of enzyme, and 8 h immobilization time at 4 °C. The immobilized BaL retained about 90% of its initial activity after 10 days of storage. Moreover, about 70% of the initial activity of the immobilized BaL was retained after 10 cycles of application. The results of esterification studies exhibited that maximum pentyl valerate synthesis using the free BaL (34.5%) and the immobilized BaL (92.7%) occurred in the organic solvent medium (xylene) after 48 h of incubation at 60 °C.

Biochemical aspects of lipase immobilization at polysaccharides for biotechnology

The design of immobilized enzyme preparations is an important and relevant area of modern sciences and technologies. Immobilization of enzymes from animal sources (component I) on natural carriers (component II) increases the system stability by protecting the active site of the enzyme from deactivation; facilitates the separation and accelerates the recovery of the enzyme. This makes reuse possible and provides a significant reduction in operating costs. Hydrolytic enzymes (such as lipases) and polysaccharides (such as chitosan) are the most promising of such pairs of components. The main attention here is devoted to the discussion on lipase immobilization on polysaccharide (mainly - chitin and chitosan). Based on the analysis of the available literature, the most adequate method is the immobilization of lipase from porcine pancreas (LPP) on polysaccharide particles (such as chitin or chitosan) pre-treated with ultrasound (to increase the particle surface area) and glutaraldehyde (for particle activation) that shows reasonably high LPP activity and stability. In order to increase further the activity of the lipase, some authors proposed to incorporate a spacer in the form of 1,3-diaminopropane (or 1,3-diaminobutane) prior to activation of the surface of the chitosan particles. In particular cases, the use of chitin (instead of chitosan) may be an alternative solution for biotechnological applications. Recently the idea of constructing "supramolecular enzyme systems" realized in the so-called "coimmobilized multienzymatic systems" strategy. The most fascinating example is the combined assay of a mixture of native LPP, glycerol kinase (from Cellulomonas) and glycerol-3-phosphate oxidase (from Aerococcus viridans) linked by glutaraldehyde to chitosan (as shell for inorganic nanoparticle core). This material was placed on a Pt-electrode as biosensor and was successfully applied for amperometric determination of the triglyceride level in the serum of healthy and diseased person. Thus, the whole innovative research-production sequence is described by Aggarwal V. and Pundir C.S.: from simple components to advanced material and further biomedical application. Thus, the following approach of lipase immobilization appears the most promising for future applications: a few types of lipases or the combination of LPP with some other enzymes immobilized simultaneously on multifunctional carriers (as nanohybrids of inorganic core and polysaccharide shell).

Synthesis of a green polyurethane foam from a biopolyol obtained by enzymatic glycerolysis and its use for immobilization of lipase NS-40116

The use of green sources for materials synthesis has gained popularity in recent years. This work investigated the immobilization of lipase NS-40116 (Thermomyces lanuginosus lipase) in polyurethane foam (PUF) using a biopolyol obtained through the enzymatic glycerolysis between castor oil and glycerol, catalyzed by the commercial lipase Novozym 435 for the PUF formation. The reaction was performed to obtain biopolyol resulting in the conversion of 64% in mono- and diacylglycerol, promoting the efficient use of the reaction product as biopolyol to obtain polyurethane foam. The enzymatic derivative with immobilized lipase NS-40116 presented apparent density of 0.19 ± 0.03 g/cm³ and an immobilization yield was 94 ± 4%. Free and immobilized lipase NS-40116 were characterized in different solvents (methanol, ethanol, and propanol), temperatures (20, 40, 60 and 80 °C), pH (3, 5, 7, 9 and 11) and presence of ions Na⁺, Mg⁺⁺, and Ca⁺⁺. The support provided higher stability to the enzyme, mainly when subjected to acid pH (free lipase lost 80% of relative activity after 360 h of contact, when the enzymatic derivative lost around 22%) and high-temperature free lipase lost 50% of relative activity, while the immobilized remained 95%. The enzymatic derivative was also used for esterification reactions and conversions around 66% in fatty acid methyl esters, using abdominal chicken fat as feedstock, were obtained in the first use, maintaining this high conversion until the fourth reuse, proving that the support obtained using environmentally friendly techniques is applicable.

Hydrophilization of bixin by lipase-catalyzed transesterification with sorbitol

Bixin is one of the most used yellow-orange food colorants in the food industry. The polyene chain of bixin makes it highly hydrophobic and less suitable for water-based food formulations. Lipase-catalyzed reactions of bixin with sorbitol were studied to synthesize a new derivative of bixin with potential hydrophilic properties. Interestingly, we show that the lipase-catalyzed reaction of bixin leads to a transesterification reaction and formation of a transesterified product, sorbitol ester of norbixin (SEN). The reaction efficiency was optimized with various immobilized lipases at different water activity levels in the organic solvent, 2-methyl-2-butanol. Among the examined lipases, immobilized Candida antarctica lipase B (Novozyme 435) provided the highest reaction yield at a water activity close to zero. Tetrahydrofuran (THF) was used as co-solvent to improve bixin solubility. The optimization of the reaction conditions with 20% THF lead to a total reaction yield of 50% of SEN.

Preparation of porous hollow Fe3O4/P(GMA-DVB-St) microspheres and application for lipase immobilization

Functional porous hollow microspheres with superparamagnetism, Fe₃O₄/P(GMA-DVB-St) microspheres, were prepared via a dispersion polymerization based on hollow Fe₃O₄ microspheres. The resulting hollow microspheres were characterized by means of Fourier-transform infrared spectrophotometer (FT-IR), X-ray diffraction (XRD), transmission electron microscopy (TEM), Brunauer-Emmett-Teller (BET) gas sorptometry, and vibrating sample magnetometer (VSM). It is verified that the resulting hollow microspheres are porous and have high saturation magnetization. For further application, candida rugosa lipase (CRL) was immobilized onto the hollow microshperes, the loading amount of lipase was 143.88 mg CRL/g support and the activity recovery of the obtained immobilized lipase reached 73.25%. Besides, the resulting immobilized CRL (ICRL) were found to have better pH endurance and temperature endurance than the free ones, which showed the optimal catalytic activity with pH of 9.0 and temperature of 60 °C. The ICRL displayed excellent reusability as well.

Modulation of the regioselectivity of Thermomyces lanuginosus lipase via biocatalyst engineering for the Ethanolysis of oil in fully anhydrous medium

Background

Enzymatic ethanolysis of oils (for example, high oleic sunflower oil containing 90% of oleic acid) may yield two different reaction products depending on the regioselectivity of the immobilized lipase biocatalyst. Some lipase biocatalysts exhibit a 1,3-regioselectivity and they produced 2 mols of fatty acid ethyl ester plus 1 mol of sn2-monoacylglycerol (2-MAG) per mol of triglyceride without the release of glycerol. Other lipase biocatalysts are completely non-regioselective releasing 3 mols of fatty acid ethyl ester and 1 mol of glycerol per mol of triglyceride. Lipase from Thermomyces lanuginosus (TLL) adsorbed on hydrophobic supports is a very interesting biocatalyst for the ethanolysis of oil. Modulation of TLL regioselectivity in anhydrous medium was intended via two strategies of TLL immobilization: a. - interfacial adsorption on different hydrophobic supports and b.- interfacial adsorption on a given hydrophobic support under different experimental conditions.

Results

Immobilization of TLL on supports containing divinylbenezene moieties yielded excellent 1,3-regioselective biocatalysts but immobilization of TLL on supports containing octadecyl groups yielded non-regioselective biocatalysts.

On the other hand, TLL immobilized on Purolite C18 at pH 8.5 and 30 °C in the presence of traces of CTAB yielded a biocatalyst with a perfect 1,3-regioselectivity and a very interesting activity: 2.5 μmols of oil ethanolyzed per min per gram of immobilized derivative. This activity is 10-fold higher than the one of commercial Lipozyme TL IM. Immobilization of the same enzyme on the same support, but at pH 7.0 and 25 °C, led to a biocatalyst which can hydrolyze all ester bonds in TG backbone.

Conclusions

Activity and regioselectivity of TLL in anhydrous media can be easily modulated via Biocatalysis Engineering producing very active immobilized derivatives able to catalyze the ethanolysis of triolein. When the biocatalyst was 1,3-regioselective a 33% of 2-monoolein was obtained and it may be a very interesting surfactant. When biocatalyst catalyzed the ethanolysis of the 3 positions during the reaction process, a 99% of ethyl oleate was obtained and it may be a very interesting drug-solvent and surfactant. The absence of acyl migrations under identical reaction conditions is clearly observed and hence the different activities and regioselectivities seem to be due to the different catalytic properties of different derivatives of TLL.

Architecture and physicochemical characterization of Bacillus biofilm as a potential enzyme immobilization factory

Biocatalysis for industrial application is based on the use of enzymes to perform complex transformations. However, these systems have some disadvantage related to the costs of the biocatalyst. In this work, an alternative strategy for producing green immobilized biocatalysts based on biofilm was developed.A study of the rheological behavior of the biofilm from Bacillus sp. Mcn4, as well as the determination of its composition, was carried out. The dynamic rheological measurements, viscosity (G") and elasticity (G') module, showed that the biofilm presents appreciable elastic components, which is a recognized property for enzymes immobilization. After the partial purification, the exopolysaccharidewas identified as a levan with a non-Newtonian behavior. Extracellular DNA with fragments between 10,000 and 1000bp was detected also in the biofilm, and amyloid protein in the extracellular matrix using a fluorescence technique was identified. Bacillus sp. Mcn4 biofilms were developed on different surfaces, being the most stable those developed on hydrophilic supports. The biofilm showed lipase activity suggesting the presence of constitutive lipases entrapped into the biofilm. Indeed, two enzymes with lipase activity were identified in native PAGE. These were used as biocatalysts, whose reuse showed a residual lipase activity after more than one cycle of catalysis. The components identified in the biofilm could be the main contributors of the rheological characteristic of this material, giving an exceptional environment to the lipase enzyme. Based on these findings, the current study proposes green and natural biopolymers matrix as support for the enzyme immobilization for industrial applications.

Selective synthesis of partial glycerides of conjugated linoleic acids via modulation of the catalytic properties of lipases by immobilization on different supports

Lipases B from Candida antarctica (CALB), Rhizomucor miehei (RML) and Thermomyces lanuginosus (TLL) were immobilized on octadecyl methacylate (OM) or octadecyl methacrylate (OMC) beads. Their specific activity and regioselectivity were studied in the synthesis of conjugated linoleic acid (CLA) partial glycerides, which presented nutraceutical properties. TLL derivatives were poor catalysts. Novozym® 435 was much better than Lipozyme® RM IM. RML activity (a GRAS enzyme) was modulated via immobilization. After only 3 h, OM-RML gave the highest CLA conversion (54% at 40 °C with 1:3 M ratio of glycerol to CLA). OM-RML reduced by a factor of 3.12 and 1.16 the activation energy of the reaction with Lipozyme® RM IM and Novozym® 435, respectively. The new GRAS preparation OM-RML brings forth an optimal regioselective preparation of sn-1 mono and sn-1,3 diacylglycerols rich in CLA, with a ratio of sn-1,3/sn-1,2 regioisomers of 21.8, compared to 2.3 for Novozym® 435.

Lipase immobilized catalytically active membrane for synthesis of lauryl stearate in a pervaporation membrane reactor

A composite catalytically active membrane immobilized with Candida rugosa lipase has been prepared by immersion phase inversion technique for enzymatic synthesis of lauryl stearate in a pervaporation membrane reactor. SEM images showed that a "sandwich-like" membrane structure with a porous lipase-PVA catalytic layer uniformly coated on a polyvinyl alcohol (PVA)/polyethersulfone (PES) bilayer was obtained. Optimum conditions for lipase immobilization in the catalytic layer were determined. The membrane was proved to exhibit superior thermal stability, pH stability and reusability than free lipase under similar conditions. In the case of pervaporation coupled synthesis of lauryl stearate, benefited from in-situ water removal by the membrane, a conversion enhancement of approximately 40% was achieved in comparison to the equilibrium conversion obtained in batch reactors. In addition to conversion enhancement, it was also found that excess water removal by the catalytically active membrane appears to improve activity of the lipase immobilized.

Interplay of carbon-silica sources on the formation of hierarchical porous composite materials for biological applications such as lipase immobilization

The porous inorganic materials, with hierarchical structures, find application in many processes where the chemical stability and pore connectivity are key points, such as separation, adsorption and catalysis. Here, we synthesized carbon-silica composite materials, which combine hydrolytic stability of the carbon with the surface chemical reactivity of silica in aqueous media. The polycondensation of carbonaceous and siliceous species from sucrose, Triton X-100 surfactant and tetraethylortosilicate during the hydrothermal synthesis led to the formation of hydrochar composite materials. The subsequent carbonization process of these composite hydrochars gave carbon-silica hierarchical porous materials. The study of the micellar reaction system and the characterization of the derivate materials (carbon-silica composite, carbon and silica) were carried out. The results indicate that synthesis conditions allowed the formation of a silica network interpenetrated with a carbon one, which is produced from the incorporated organic matter. The control of the acidity of the reaction medium and hydrothermal conditions modulated the reaction yield and porous characteristics of the materials. The composite nature in conjunction with the hierarchical porosity increases the interest of these materials for future biological applications, such as lipase immobilization.