The single-cell modification strategies for probiotics delivery in inflammatory bowel disease: A review

Oral probiotic therapy has become an increasingly attractive method for treating various diseases, including intestinal barrier dysfunction, inflammatory bowel disease (IBD), and colorectal cancer due to its safety and convenience. However, only a few probiotics after oral gavage can survive the acidic and bile salt conditions of the gastrointestinal tract and colonize the colon to have a nutritional effect on the host. To address these challenges, encapsulation technology has been applied to protect probiotics from harsh gastrointestinal conditions, improve gut adhesion, and reduce immunogenicity. In addition, some of the functional polysaccharides are used to endow probiotics with exogenous functions as prebiotics. In this review, we systematically introduced the advancements of emerging single-cell modification strategies for probiotics in IBD applications. Additionally, we discussed the limitations and perspectives of single-cell modification strategies for probiotics. This review contributed to the development of probiotic delivery systems with higher therapeutic efficacy against colitis.

Nanocoating and its application as antimicrobials in the food industry: A review

Nanocoatings are ultra-thin layers on the nanoscale (<100 nm) that are deposited on the substrate to improve their properties and functionality. These nanocoatings provide significant advantages compared to traditional coating, including stain resistance, antimicrobial and antioxidant activities, odor control and delivery of active agents, and liquid repellence properties. In the food industry, nanocoating is widely used in the food packaging sector. In this regard, nanocoating offers antimicrobials and antioxidant properties to active food packaging by incorporating active bioactive compounds into materials used in already existing packaging. The application of nanocoating is applied to these kinds of food packaging with nano coating to improve shelf life, safety, and quality of food packaging. In smart/intelligent packaging, the active packaging coating is promising food packaging, which is designed by releasing preservatives and nanocoating as an antimicrobial, antifungal, antioxidant, barrier coating, and self-cleaning food contact surfaces. In addition, nanocoating can be used for food contact surfaces, kitchen utensils, and food processing equipment to create antimicrobial, antireflective, and dirt-repellent properties. These are critical properties for food processing, especially for meat and dairy processing facilities, which can reduce biofilm formation and prevent cross-contamination. Recently, appreciable growth in the development of the application of nanocoating as edible films for coating food products has emerged to improve food safety issues. In this regard, much scientific research in the area of nanocoating fruits and vegetables, and other food products was performed to address food safety issues. Hence, this promising technology can be a great addition to the agricultural and food industries. Thus, this review addresses the most relevant information about this technology and the applications of nanocoating in the food industry.

Effect of titanium dioxide nanocoating on the colour stability of room temperature vulcanizing maxillofacial silicone-an invitro study

OBJECTIVE

The aim of this in vitro study was to evaluate the effect of an oxide nanocoating to prevent colour degradation of maxillofacial silicone elastomers following accelerated ageing.

MATERIAL AND METHODS

Specimens (N = 40) of specified dimensions were fabricated in Factor II room temperature vulcanizing (RTV) silicone and processed according to the manufacturer's instructions. Two groups were classified with 20 specimens each. Specimens in the first group were coated with titanium dioxide (TiO2) by atomic layer deposition technology. The colour stability test was conducted with a UV-VIS spectrometer (Schimadzu) for both titanium dioxide nanocoated and uncoated specimen groups after subjecting them to accelerated ageing. It was analysed using the CIE L*a*b method.

RESULTS

The average colour change was highest for uncoated specimens (2.868), and the average colour change for titanium dioxide-coated specimens was significantly low (1.774). The average colour change of uncoated specimens (2.868) was close to the acceptable threshold value (3), and that of coated specimens (1.774) was far below the acceptable threshold (3).

CONCLUSIONS

The colour change that occurred in titanium dioxide nanocoated specimens following accelerated ageing was significantly lower than that in the uncoated group, showing that the TiO2 nanocoating was effective in reducing the colour degradation of silicone elastomers.

CLINICAL RELEVANCE

Maxillofacial prostheses fabricated from silicone elastomers go through undesirable colour degradation over time. The development of a scientific technique that retards the colour deterioration of silicone prostheses would be of great clinical significance.

Nanotechnology: the Alternative and Efficient Solution to Biofouling in the Aquaculture Industry

Biofouling is a global issue in aquaculture industries. It adversely affects marine infrastructure (ship's hulls, mariculture cages and nets, underwater pipes and filters, building materials, probes, and sensor devices). The estimated cost of managing marine biofouling accounts for 5-10% of production cost. Non-toxic foul-release coating and biocide-based coating are the two current approaches. Recent innovation and development of a surface coating with nanoparticles such as photocatalytic zinc oxide nanocoating on fishing nets, copper oxide nanocoating on the water-cooling system, and silver nanoparticle coating to inhibit microalgal adhesion on submerged surfaces under natural light (photoperiod) could present meaningful anti-biofouling application. Nanocoating of zinc, copper, and silver oxide is an environmentally friendly surface coating strategy that avoid surface adhesion of bacteria, diatoms, algal, protozoans, and fungal species. Such nanocoating could also provide a solution to strains tolerant to Cu, Zn, and Ag. This draft of the special issue demonstrates the anti-biofouling potential of various metal and metal oxide nanoparticle coating to combat aquaculture industry biofouling problems.

Nanotechnology for sustainable agro-food systems: The need and role of nanoparticles in protecting plants and improving crop productivity

The rapid population growth and environmental challenges in agriculture need innovative and sustainable solutions to meet the growing need for food worldwide. Recent nanotechnological advances found its broad applicability in agriculture's protection and post-harvesting. Engineered nanomaterials play a vital role in plant regulation, seed germination, and genetic manipulation. Their size, surface morphology, properties, and composition were designed for controlled release and enhanced properties in agriculture and the food industry. Nanoparticles can potentially be applied for the targeted and controlled delivery of fertilizers, pesticides, herbicides, plant growth regulators, etc. This help to eliminate the use of chemical-based pesticides and their water solubility, protect agrochemicals from breakdown and degradation, improve soil health, and naturally control crop pathogens, weeds, and insects, ultimately leading to enhanced crop growth and production capacity in the food industry. They can be effectively utilized for nano-encapsulation, seed germination, genetic manipulation, etc., for protecting plants and improving crop productivity, safe and improved food quality, and monitoring climate conditions. Nanoparticles played a crucial role in the uptake and translocation processes, genetically modifying the crops, high seed germination, and productivity. In this article, we have reviewed some important applications of nanoparticles for sustainable agro-food systems. The need and role of nanotechnology concerning challenges and problems faced by agriculture and the food industry are critically discussed, along with the limitations and future prospects of nanoparticles.

Capture and Selective Release of Viable Circulating Tumor Cells

Selectively capturing and releasing viable circulating tumor cells (CTCs) from the peripheral blood of cancer patients is advantageous for investigating the molecular hallmarks of metastasis and developing personalized therapeutics. CTC-based liquid biopsies are flourishing in the clinical setting, offering opportunities to track the real-time responses of patients during clinical trials and lending accessibility to cancers that are traditionally difficult to diagnose. However, CTCs are rare compared to the breadth of cells that reside in the circulatory network, which has encouraged the engineering of novel microfluidic devices. Current microfluidic technologies either extensively enrich CTCs but compromise cellular viability or sort viable CTCs at low efficiencies. Herein we present a procedure to fabricate and operate a microfluidic device capable of capturing CTCs at high efficiencies while ensuring high viability. The microvortex-inducing microfluidic device functionalized with nanointerfaces positively enriches CTCs via cancer-specific immunoaffinity, while a thermally responsive surface chemistry releases the captured cells by raising the temperature to 37 °C.

Contact lenses coated with hybrid multifunctional ternary nanocoatings (Phytomolecule-coated ZnO nanoparticles:Gallic Acid:Tobramycin) for the treatment of bacterial and fungal keratitis

Contact lenses are widely used for visual corrections. However, while wearing contact lenses, eyes typically face discomforts (itching, irritation, burning, etc.) due to foreign object sensation, lack of oxygen permeability, and tear film disruption as opposed to a lack of wetting agents. Eyes are also prone to ocular infections such as bacterial keratitis (BK) and fungal keratitis (FK) and inflammatory events such as contact lens-related acute red eye (CLARE), contact lens peripheral ulcer (CLPU), and infiltrative keratitis (IK) caused by pathogenic bacterial and fungal strains that contaminate contact lenses. Therefore, a good design of contact lenses should adequately address the need for wetting, the supply of antioxidants, and antifouling and antimicrobial efficacy. Here, we developed multifunctional gallic acid (GA), phytomolecules-coated zinc oxide nanoparticles (ZN), and phytomolecules-coated zinc oxide nanoparticles + gallic acid + tobramycin (ZGT)-coated contact lenses using a sonochemical technique. The coated contact lenses exhibited significant antibacterial (>log₁₀ 5.60), antifungal, and antibiofilm performance against BK-causing multidrug resistant bacteria (Staphylococcus aureus, Pseudomonas aeruginosa, and Escherichia. coli) and FK-related pathogenic fungal strains (Candida albicans, Aspergillus fumigatus, and Fusarium solani). The gallic acid, tobramycin, and phytomolecules-coated zinc oxide nanoparticles have different functionalities (-OH, -NH₂, -COOH, -COH, etc.) that enhanced wettability of the coated contact lenses as compared to that of uncoated ones and further enabled them to exhibit remarkable antifouling property by prohibiting adhesion of platelets and proteins. The coated contact lenses also showed significant antioxidant activity by scavenging DPPH and good cytocompatibility to human corneal epithelial cells and keratinocytes cell lines. STATEMENT OF SIGNIFICANCE: • Multifunctional coated lenses were developed with an efficient sonochemical approach. • Lens surface was modified with nanocoatings of ZnO nanoparticles, gallic acid, and tobramycin. • This synergistic combination endowed the lenses with remarkable antimicrobial activity. • Coated lenses also showed noteworthy antifouling and biofilm inhibition activities. • Coated lenses showed good antioxidant, biocompatibility, and wettability characteristics.

Cobalt and silver nanocoatings for reactor dosimetry

Activation foils are an important tool for the characterization of neutron fields. Some of the materials that are used in these foils have large interaction cross-sections that cause unwanted self-shielding effects. In practice experimenters minimize these effects by using aluminium alloys. An alternative approach can be a nanocoating of a pure material on a carrier. The validity of this approach is investigated in this work. Nanocoatings can be more flexible compared to alloys and can probably reduce the number of required post-irradiation gamma spectrometry measurements. Cobalt and silver nanocoatings were deposited by physical vapour deposition on nickel and aluminium carrier foils. The nanocoatings were tested in two irradiation campaigns in the Belgian Reactor 1 at SCK CEN. By depositing nanocoatings with different thickness and determining the corresponding number of activated atoms the inherent flexibility of the technique is demonstrated. When the dosimeters were punched from the carrier foils, the metal cylindrical punch damaged the nanocoatings which increased the spread on the number of atoms between different dosimeters. This is prevented by including a Ti interlayer of 5 nm between the carrier and the cobalt and silver layers. It was shown that this results in a coating with good homogeneity or minimal spread. This study shows that applying nanocoatings on a carrier is a valid technique to make dosimeters.

MXene/chitosan nanocoating for flexible polyurethane foam towards remarkable fire hazards reductions

MXene/chitosan nanocoating for flexible polyurethane foam (PUF) was prepared via layer-by-layer (LbL) approach. MXene (Ti₃C₂) ultra-thin nanosheets were obtained through etching process of Ti₃AlC₂ followed by exfoliation. The deposition of MXene/chitosan nanocoating was conducted by alternatingly immersing the PUF into a chitosan solution and a Ti₃C₂ aqueous dispersion, which resulted in different number of bilayers (BL) ranging from 2, 5 and 8. Owing to the utilization of ultra-thin Ti₃C₂ nanosheets, the weight gain was only 6.9% for 8 BL coating of PUF, which minimised the unfavourable impact on the intrinsic properties of PUF. The Ti₃C₂/chitosan coating significantly reduced the flammability and smoke releases of PUF. Compared with unmodified PUF, the 8 BL coating reduced the peak heat release rate by 57.2%, alongside with a 65.5% reduction in the total heat release. The 8 BL coating also showed outstanding smoke suppression ability with total smoke release decreased by 71.1% and peak smoke production rate reduced by 60.3%, respectively. The peak production of CO and CO₂ gases also decreased by 70.8% and 68.6%, respectively. Furthermore, an outstanding char formation performance of 37.2 wt.% residue was obtained for 8 BL coated PUF, indicating the excellent barrier and carbonization property of the hybrid coating.

Biologically responsive, long-term release nanocoating on an electrospun scaffold for vascular endothelialization and anticoagulation

A critical challenge to the development of tissue engineering small-diameter vascular grafts is to achieve rapid endothelialization and long-term anticoagulation. It is necessary to graft both adhesion and antithrombus factors onto the surface of polycaprolactone without burst release to promote endothelial cell affinity and antithrombogenicity. A bionic structure with a nanocoating that allows a biologically responsive, long-term release was employed in this work to enable the grafting of various bioactive molecules such as gelatin, polylysine, and heparin. This approach involved orienting the biomimetic vascular structures; the self-assembly grafting of gelatin, polylysine, and heparin nanoparticles; and genipin crosslinking to form a multiphase crosslinked nanocoating. In this biologically inspired design, vascular endothelialization and long-term anticoagulation were successfully induced through a matrix metallopeptidase 2 regulative mechanism by delivering both adhesion and antithrombus factors with a responsive, long-term release without burst release. The method provided a simple and effective approach for delivering dual factors for tissue engineering small-diameter vascular grafts.

Silica-quaternary ammonium "Fixed-Quat" nanofilm coated fiberglass mesh for water disinfection and harmful algal blooms control

Intensification of pollution loading worldwide has promoted an escalation of different types of disease-causing microorganisms, such as harmful algal blooms (HABs), instigating detrimental impacts on the quality of receiving surface waters. Formation of unwanted disinfection by-products (DBPs) resulting from conventional disinfection technologies reveals the need for the development of new sustainable alternatives. Quaternary Ammonium Compounds (QACs) are cationic surfactants widely known for their effective biocidal properties at the ppm level. In this study, a novel silica-based antimicrobial nanofilm was developed using a composite of silica-modified QAC (Fixed-Quat) and applied to a fiberglass mesh as an active surface via sol-gel technique. The synthesized Fixed-Quat nanocoating was found to be effective against E. coli with an inactivation rate of 1.3 × 10^-3 log reduction/cm min. The Fixed-Quat coated fiberglass mesh also demonstrated successful control of Microcystis aeruginosa with more than 99% inactivation after 10 hr of exposure. The developed antimicrobial mesh was also evaluated with wild-type microalgal species collected in a water body experiencing HABs, obtaining a 97% removal efficiency. Overall, the silica-functionalized Fixed-Quat nanocoating showed promising antimicrobial properties for water disinfection and HABs control, while decreasing concerns related to DBPs formation and the possible release of toxic nanomaterials into the environment.

A green approach to fabricating nacre-inspired nanocoating for super-efficiently fire-safe polymers via one-step self-assembly

Developing a high efficient, environmental-friendly and universal fire-safe strategy for combustible polymers is crucial but challengeable. Inspired by nacre, we developed a super-efficiently fire-safe nanocoating based on carboxymethyl chitosan (CCS) and modified montmorillonite (MMT) via one-step self-assembly. The nanocoating possessed well-arranged nacre-like hierarchical microstructure, exhibiting high transparency and specific nacre-like iridescence. More importantly, the nanocoating endowed many large-scale polymer substrates, such as polyester film, cotton fabric and polyurethane foam, with super-efficient fire-safety by dip-coating or spray-coating. All the coated substrates were self-extinguished in the burning tests. Meanwhile, their heat release and smoke production were decreased remarkably. Most notably, the peak heat release rate, total heat release, peak smoke production rate and total smoke production of polyurethane foam were decreased by 84.1%, 89.4%, 84.4% and 95.2%, respectively. Additionally, no organic solvent, halogen and phosphorus element were involved, which was environmental-friendly. Our findings provide a super-efficient, economical, universal and green fabrication strategy for fire-safe polymers.

Resistance of coated polyetheretherketone lumbar interbody fusion cages against abrasion under simulated impaction into the disc space

In order to improve osseointegration, polyetheretherketone (PEEK) interbody fusion cages are frequently surface coated. The bonding strength of the coatings is mostly investigated under unrealistic loading conditions. To close this gap, in this study, uncoated and coated cages were loaded in a clinical setup in order to investigate their real resistance against abrasion. Six uncoated, six calcium phosphate (CaP) nanocoated, and six titanium (Ti) nanocoated PEEK cages were tested in this study. The experimental setup was designed to mimic cage impaction into the intervertebral disc space using polyurethane (PU) foam blocks as vertebral body substitutes. The cage surface was inspected before and after impaction, and their weight was measured. Impaction resulted in abrasion at the tip of the ridges on the implant surface. The mean weight loss was 0.39 mg for the uncoated cages, 0.57 mg for the CaP nanocoated cages, and 0.75 mg for the Ti nanocoated cages. These differences were statistically significant. In conclusion, differences between the three cage types were found concerning the amount of abrasion. However, all three cages lost less weight than a comparative Ti plasma spray coated cage, which showed a mean weight loss of 2.02 mg. This may be because the plasma spray coating is significantly thicker than the two nanocoatings. If compared with the permitted amount of weight loss derived from an FDA guidance document, which is approximately 1.7 mg, the wear of the Ti plasma spray coated cage is above this limit, whereas the wear for all other cage types is below.

Electroless controllable growth of ZnO films and their morphology-dependent antimicrobial properties

An electroless deposition process was used to synthesize with a controlled morphology, polycrystalline ZnO on glass substrates as antimicrobial coatings. The influence of deposition temperature (T_dep) on the physicochemical and antimicrobial properties of the ZnO films was analyzed. The results indicated that a change in deposition temperature greatly affected the morphology and the degree of crystallinity of the films. Scanning electron microscope images show that the film surface is porous at a deposition temperature of 40 and 50 °C, whereas hexagonal-plate shaped morphology predominated at 60 °C and finally at 70 and 80 °C the films consisted of rod-like particles. The films showed good transparency in the visible region. All ZnO films presented notable antimicrobial activity against the gram-negative bacteria Escherichia coli (E. coli) and the gram-positive Staphylococcus aureus (S. aureus). It was found that the antimicrobial efficiency is strongly dependent on morphology and structural properties. The best antimicrobial performance was recorded for the films consisting of rod-like morphology with a high degree of crystallinity. The procedure used in this investigation is strongly recommended for the development of functional surfaces.

Nano-cellulose based nano-coating biomaterial dataset using corn leaf biomass: An innovative biodegradable plant biomaterial

The nanocellulose derived biodegradable plant biomaterial as nano-coating can be used in the medical, biomedical cosmetics, and bioengineering products. Bio-plastic and some synthetic derived materials are edible and naturally biodegradable. The study was conducted to investigate edible nano-biopolymer based nano-coating of capsules and drugs or other definite biomedical materials from corn leaf biomass. Corn leaf biomass was used as an innovative sample to produce edible nano-coating bioplastic for drug and capsule coating and other industrial uses. The data show the negligible water 0.01% absorbed by bio-plastic nanocoating. Odor represented by burning test was under the completely standard based on ASTM. Moreover, data on color coating, tensile strength, pH, cellulose content have been shown under standard value of ASTM (American standard for testing and materials) standard. In addition to that data on the chemical element test like K+, CO3−−, Cl^-_, Na+ exhibited positive data compared to the synthetic plastic in the laboratory using the EN (166)) standardization. Therefore, it can be concluded that both organic (cellulose and starch) based edible nano-coating bioplastic may be used for drug and capsule coating as biomedical and medical components in the pharmaceutical industries.

Pancreatic islet surface bioengineering with a heparin-incorporated starPEG nanofilm

Cell surface engineering could protect implanted cells from host immune rejections while modify the cellular landscape for better post-transplantation graft function and survival. Islet transplantation is considered the most promising therapeutic option with the potential to cure diabetes. Current approach to improve clinical efficacy of pancreatic islet transplantation is alginate encapsulation. However, disappointing outcomes have been reported in clinical trials due to larger islet size resulted by encapsulation and alginate-elicited host immune responses. We have developed an ultrathin nanofilm of starPEG with incorporated heparin (Hep-PEG) that binds covalently to the amine groups of islet surface membrane via its N-hydroxysuccinimide groups. The Hep-PEG nanocoating elicited minimal alteration on islet volume in culture. Hep-PEG-coated islets exhibited robust islet viability accompanied by uncompromised islet insulin secretory function. Instant blood-mediated inflammatory reaction was also reduced by Hep-PEG islet coating, accompanied by enhanced intra-islet revascularization. In addition, despite its semi-permeability, Hep-PEG islet coating promoted the survival of islets exposed to pro-inflammatory cytokines. Considering that inflammation and hypoxia are primary causes of immediate cell loss for cell therapy, the Hep-PEG nanofilm represents a viable approach for cell surface engineering which would improve the clinical outcome of cell therapies.

Preparation of copper-containing bioactive glass/eggshell membrane nanocomposites for improving angiogenesis, antibacterial activity and wound healing

Effectively stimulating angiogenesis and avoiding wound infection are great challenges in wound care management. Designing new healing dressings with requisite angiogenic capacity and antibacterial performance is of particular significance. In order to achieve this aim, we prepared a copper (Cu)-containing bioactive glass nanocoating (40-50nm) with uniform nanostructure on natural eggshell membrane (Cu-BG/ESM) by the pulsed laser deposition (PLD) technique. The surface physicochemical properties including hydrophilicity and hardness of ESM were significantly improved after depositing Cu-BG nanocoatings. Meanwhile, 5Cu-BG/ESM films containing 5mol% Cu stimulated proangiogenesis by improving vascular endothelial growth factor (VEGF) and hypoxia-inducible factor (HIF)-1α protein secretion as well as angiogenesis-related gene expression (VEGF, HIF-1α, VEGF receptor 2 (KDR) and endothelial nitric oxide (eNos)) of human umbilical vein endothelial cells (HUVECs). When used to treat full-thickness skin defects in mice, 5Cu-BG/ESM films enhanced the healing quality as confirmed by the significantly improved angiogenesis (as indicated by CD31 expression) and formation of continuous and uniform epidermis layer in vivo. Furthermore, 5Cu-BG/ESM films could maintain a sustained release of Cu(2+) ions and distinctly inhibited the viability of bacteria (Escherichia coli). The results indicate that Cu(2+) ions released from Cu-BG/ESM nanocomposite films play an important role for improving both angiogenesis and antibacterial activity and the prepared nanocomposite films combined Cu-containing BG nanocoatings with ESM are a promising biomaterial for wound healing application.

STATEMENT OF SIGNIFICANCE

Designing new healing dressings with requisite angiogenic capacity and antibacterial performance is of particular significance in wound care management. In our study, we successfully prepared copper-containing bioactive glass/eggshell membrane (Cu-BG/ESM) nanocomposites with uniform bioactive glass nanocoatings by using pulsed laser deposition (PLD) technology. Due to the deposited Cu-BG nanocoatings on the surface of ESM, Cu-BG/ESM nanocomposites possessed significantly improved physicochemical and biological properties, including surface hydrophilicity, hardness, antibacterial ability, angiogenesis rate in vitro and wound healing quality in vivo as compared to pure ESM and BG/ESM films. Our study showed that prepared nanocoatings on Cu-BG/ESM nanocomposites offer a beneficial carrier for sustained release of Cu(2+) ions which played a key role for improving both angiogenesis and antibacterial activity. The prepared nanocomposites combined Cu-containing BG nanocoatings with ESM are a promising biomaterial for wound healing application.