1
|
Dhaliwal G, Ouanounou A. Tooth surface loss: causes, management and prevention. Quintessence Int 2024; 0:0. [PMID: 38634628 DOI: 10.3290/j.qi.b5223649] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Subscribe] [Scholar Register] [Indexed: 04/19/2024]
Abstract
OBJECTIVES Tooth wear (TW), also referred to as tooth surface loss (TSL), occurs due to causes other than caries. This involves the loss of hard tissues, namely enamel, dentin and/or cementum. Types of TW/TSL are abrasion, abfraction, attrition and erosion. These multifactorial conditions can be caused things such as lifestyle, diet or even habits and may not be symptomatic. The focus of this article is to provide clinicians with detailed examples and explanations of the causes of tooth loss to aid in early diagnosis. Through early identification, the preventive measures outlined can be implemented to avoid excessive TW. The provision of a treatment flowchart and general treatment recommendations aims to help clinicians determine when to restore these lesions and the most appropriate treatment measures for the 4 types of wear. MATERIALS AND METHODS The PubMed (MEDLINE) search engine was used to gather information on TW restricted to a five-year period (26 August 2018 - 25 July 2022). Only English-language studies and reviews with the best balance of sensitivity and specificity were considered. A Boolean search of the PubMed dataset was implemented to combine a range of keywords: ("tooth wear" OR tooth attrition OR tooth erosion OR tooth abrasion OR tooth abfraction). Additional articles were also selected through Google Scholar. RESULTS By this process, many articles and studies were obtained, and the 48 most relevant published studies were chosen and used in the current review. The selected articles are in the reference list. CONCLUSION TW affects an increasing number of individuals and can have detrimental effects physically, mentally and emotionally. It is important to stress early diagnosis and management of tooth wear through monitoring, prevention and treatment where indicated.
Collapse
|
2
|
Hackethal S, Schulz-Kornas E, Gorb SN, Krings W. Wear patterns of radular teeth in Loligo vulgaris (Cephalopoda; Mollusca) are related to their structure and mechanical properties. Interface Focus 2024; 14:20230082. [PMID: 38618237 PMCID: PMC11008966 DOI: 10.1098/rsfs.2023.0082] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/27/2023] [Accepted: 03/05/2024] [Indexed: 04/16/2024] Open
Abstract
Radular teeth have to cope with wear, when interacting with ingesta. In some molluscan taxa, wear-coping mechanisms, related to the incorporation of high contents of iron or silica, have been previously determined. For most species, particularly for those which possess radulae without such incorporations, wear-coping mechanisms are understudied. In the present study, we documented and characterized the wear on radular teeth in the model species Loligo vulgaris (Cephalopoda). By applying a range of methods, the elementary composition and mechanical properties of the teeth were described, to gain insight into mechanisms for coping with abrasion. It was found that the tooth regions that are prone to wear are harder and stiffer. Additionally, the surfaces interacting with the ingesta possessed a thin coating with high contents of silicon, probably reducing abrasion. The here presented data may serve as an example of systematic study of radular wear, in order to understand the relationship between the structure of radular teeth and their properties.
Collapse
Affiliation(s)
- Svenja Hackethal
- Department of Cariology, Endodontology and Periodontology, Universität Leipzig, Liebigstraße 12, 04103 Leipzig, Germany
- Department of Mammalogy and Paleoanthropology, Leibniz Institute for the Analysis of Biodiversity Change, Martin-Luther-King-Platz 3, 20146 Hamburg, Germany
- Department of Electron Microscopy, Institute of Cell and Systems Biology of Animals, Universität Hamburg, Martin-Luther-King-Platz 3, 20146 Hamburg, Germany
| | - Ellen Schulz-Kornas
- Department of Cariology, Endodontology and Periodontology, Universität Leipzig, Liebigstraße 12, 04103 Leipzig, Germany
- Department of Mammalogy and Paleoanthropology, Leibniz Institute for the Analysis of Biodiversity Change, Martin-Luther-King-Platz 3, 20146 Hamburg, Germany
| | - Stanislav N. Gorb
- Department of Functional Morphology and Biomechanics, Zoological Institute, Christian-Albrechts-Universität zu Kiel, Am Botanischen Garten 1–9, 24118 Kiel, Germany
| | - Wencke Krings
- Department of Cariology, Endodontology and Periodontology, Universität Leipzig, Liebigstraße 12, 04103 Leipzig, Germany
- Department of Mammalogy and Paleoanthropology, Leibniz Institute for the Analysis of Biodiversity Change, Martin-Luther-King-Platz 3, 20146 Hamburg, Germany
- Department of Electron Microscopy, Institute of Cell and Systems Biology of Animals, Universität Hamburg, Martin-Luther-King-Platz 3, 20146 Hamburg, Germany
- Department of Functional Morphology and Biomechanics, Zoological Institute, Christian-Albrechts-Universität zu Kiel, Am Botanischen Garten 1–9, 24118 Kiel, Germany
| |
Collapse
|
3
|
Tandecka K, Kacalak W, Rypina Ł, Wiliński M, Wieczorowski M, Mathia TG. Effects of Pressure Rollers with Variable Compliance in the Microfinishing Process Utilizing Abrasive Films. Materials (Basel) 2024; 17:1795. [PMID: 38673152 PMCID: PMC11051116 DOI: 10.3390/ma17081795] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/23/2024] [Revised: 04/04/2024] [Accepted: 04/11/2024] [Indexed: 04/28/2024]
Abstract
This article presents a comprehensive investigation into pressure rollers utilized in the microfinishing process, covering aspects such as design, experimental properties, compliance, and finite element simulation. Prototype pressure rollers with unconventional elastomer configurations were designed and analyzed to explore their effectiveness in achieving superior surface finishes. Experimental analysis and finite element simulations were conducted to gain insights into the performance and behavior of these pressure rollers under various loading conditions. This study addresses the validation of constitutive material models used in finite element simulations to ensure accuracy and reliability. The results indicate that the applied material model, validated through experimental analysis, accurately predicts pressure roller behavior. Finite element simulations reveal distinct contact zone patterns and stress distributions across the contact surfaces, highlighting the importance of considering deflection-induced variations in contact behavior. Additionally, the investigation evaluates the effectiveness of different pressure rollers in removing surface irregularities during the microfinishing process. Roller R3 demonstrates the highest efficacy in removing surface peaks, suggesting its potential for achieving superior surface finishes. Overall, this research contributes to the advancement of microfinishing techniques by providing insights into pressure roller design, performance, and behavior, thereby optimizing microfinishing processes to produce high-quality components. The urgency of this study arises from the growing need for exceptional surface finishes in various industrial sectors. With manufacturing industries increasingly pursuing high-precision components boasting flawless surface quality, the significance of microfinishing processes is highlighted.
Collapse
Affiliation(s)
- Katarzyna Tandecka
- Department of Engineering and Informatics Systems, Faculty of Mechanical Engineering and Energy, Koszalin University of Technology, 75-620 Koszalin, Poland; (W.K.); (Ł.R.)
| | - Wojciech Kacalak
- Department of Engineering and Informatics Systems, Faculty of Mechanical Engineering and Energy, Koszalin University of Technology, 75-620 Koszalin, Poland; (W.K.); (Ł.R.)
| | - Łukasz Rypina
- Department of Engineering and Informatics Systems, Faculty of Mechanical Engineering and Energy, Koszalin University of Technology, 75-620 Koszalin, Poland; (W.K.); (Ł.R.)
| | | | - Michał Wieczorowski
- Faculty of Mechanical Engineering, Institute of Applied Mechanics, Poznan University of Technology, 3 Piotrowo St., 60-965 Poznan, Poland;
| | - Thomas G. Mathia
- Laboratoire de Tribologie et Dynamique des Systemes (LTDS), Ecole Centrale de Lyon, Centre National de la Recherche Scientifique, 69134 Lyon, France;
| |
Collapse
|
4
|
Tandecka K, Kacalak W, Wiliński M, Wieczorowski M, Mathia TG. Superfinishing with Abrasive Films Featuring Discontinuous Surfaces. Materials (Basel) 2024; 17:1704. [PMID: 38612217 PMCID: PMC11012491 DOI: 10.3390/ma17071704] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/05/2024] [Revised: 03/25/2024] [Accepted: 04/03/2024] [Indexed: 04/14/2024]
Abstract
This study introduces innovative designs for abrasive tools aimed at enhancing surface finishing processes. Prototypes consisting of non-continuous abrasive films with discontinuous surface carriers and abrasive layers were developed to improve the efficiency and effectiveness of the smoothing process. Four distinct abrasive films with varying nominal grain sizes were fabricated to explore the versatility and efficacy of the prototypes. The results indicate that the incorporation of carrier irregularities significantly influences surface finishing processes, leading to improvements in material removal efficiency and surface quality. Longitudinal discontinuities facilitate faster removal of irregularities from workpiece materials, reducing the risk of deep scratches on surfaces. Additionally, this study highlights the importance of tool motion patterns in optimizing material removal processes and ensuring surface quality. The integration of carrier irregularities with additional oscillatory tool motion shows promise for further improving surface quality. These findings advance our understanding of abrasive machining processes and provide valuable insights for optimizing abrasive tool designs and machining strategies for enhanced surface finishing.
Collapse
Affiliation(s)
- Katarzyna Tandecka
- Department of Engineering and Informatics Systems, Faculty of Mechanical Engineering and Energy, Koszalin University of Technology, 75620 Koszalin, Poland;
| | - Wojciech Kacalak
- Department of Engineering and Informatics Systems, Faculty of Mechanical Engineering and Energy, Koszalin University of Technology, 75620 Koszalin, Poland;
| | | | - Michał Wieczorowski
- Faculty of Mechanical Engineering, Institute of Applied Mechanics, Poznan University of Technology, 3 Piotrowo St., 60965 Poznan, Poland;
| | - Thomas G. Mathia
- Laboratoire de Tribologie et Dynamique des Systemes (LTDS), Ecole Centrale de Lyon, Centre National de la Recherche Scientifique, 69134 Lyon, France;
| |
Collapse
|
5
|
Pinger T, Brand M, Grothe S, Marginean G. Abrasive Wear Behavior of Batch Hot-Dip Galvanized Coatings. Materials (Basel) 2024; 17:1547. [PMID: 38612061 PMCID: PMC11012822 DOI: 10.3390/ma17071547] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/29/2024] [Revised: 03/18/2024] [Accepted: 03/25/2024] [Indexed: 04/14/2024]
Abstract
In recent decades, batch hot-dip galvanized (HDG) steel has proven itself in practical applications due to the good corrosion resistance of its components. Despite the importance of the mechanical-load-bearing capacity of these coatings, the wear behavior has, so far, only been investigated very sporadically and not systematically, so a quantification of the wear behavior and statements on the mechanisms are vague. Therefore, two body wear tests with bonded abrasive grain were carried out. Varying the friction rolls, load, and total number of cycles, the wear behavior was investigated. The mass loss and the layer thickness reduction were measured at different intervals. After the test, the microstructure in the cross-section and the hardness according to Vickers (0.01 HV) were evaluated. The results showed that the wear behavior of HDG coatings against abrasive loads can be characterized with the selected test conditions. Initially, the applied load removed the soft η-phase. As the total number of cycles increases, the η- and ζ-phases deform plastically, resulting in a lower mass reduction compared to that expected from the measured layer thickness. The characteristic structure of a batch HDG coating with hard intermetallic Zn-Fe phases and an outer pure zinc phase has demonstrated effective resistance to abrasion.
Collapse
Affiliation(s)
- Thomas Pinger
- ZINQ Technologie GmbH, An den Schleusen 6, 45881 Gelsenkirchen, Germany;
| | - Marco Brand
- ZINQ Technologie GmbH, An den Schleusen 6, 45881 Gelsenkirchen, Germany;
- Institute of Mechanical Engineering, Westphalian University of Applied Sciences, Neidenburger Str. 43, 45897 Gelsenkirchen, Germany; (S.G.); (G.M.)
| | - Sonja Grothe
- Institute of Mechanical Engineering, Westphalian University of Applied Sciences, Neidenburger Str. 43, 45897 Gelsenkirchen, Germany; (S.G.); (G.M.)
| | - Gabriela Marginean
- Institute of Mechanical Engineering, Westphalian University of Applied Sciences, Neidenburger Str. 43, 45897 Gelsenkirchen, Germany; (S.G.); (G.M.)
| |
Collapse
|
6
|
Chen JM, Cheng YL, Yang MH, Su C, Yu H. Enhancing the inhibition of dental erosion and abrasion with quercetin-encapsulated hollow mesoporous silica nanocomposites. Front Bioeng Biotechnol 2024; 12:1343329. [PMID: 38405377 PMCID: PMC10885352 DOI: 10.3389/fbioe.2024.1343329] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/23/2023] [Accepted: 01/26/2024] [Indexed: 02/27/2024] Open
Abstract
Introduction: Dental erosion and abrasion pose significant clinical challenges, often leading to exposed dentinal tubules and dentine demineralization. The aim of this study was to analyse the efficacy of quercetin-encapsulated hollow mesoporous silica nanocomposites (Q@HMSNs) on the prevention of dentine erosion and abrasion. Method: Q@HMSNs were synthesized, characterized, and evaluated for their biocompatibility. A total of 130 dentine specimens (2 mm × 2 mm × 2 mm) were prepared and randomly distributed into 5 treatment groups (n = 26): DW (deionized water, negative control), NaF (12.3 mg/mL sodium fluoride, positive control), Q (300 μg/mL quercetin), HMSN (5.0 mg/mL HMSNs), and Q@HMSN (5.0 mg/mL Q@HMSNs). All groups were submitted to in vitro erosive (4 cycles/d) and abrasive (2 cycles/d) challenges for 7 days. The specimens in the DW, NaF, and Q groups were immersed in the respective solutions for 2 min, while treatment was performed for 30 s in the HMSN and Q@HMSN groups. Subsequently, the specimens were subjected to additional daily erosion/abrasion cycles for another 7 days. The effects of the materials on dentinal tubule occlusion and demineralized organic matrix (DOM) preservation were examined by scanning electron microscopy (SEM). The penetration depth of rhodamine B fluorescein into the etched dentine was assessed using confocal laser scanning microscopy (CLSM). The erosive dentine loss (EDL) and release of type I collagen telopeptide (ICTP) were measured. The data were analysed by one-way analysis of variance (ANOVA) with post hoc Tukey's test (α = 0.05). Results: Q@HMSNs were successfully synthesized and showed minimal toxicity to human dental pulp stem cells (HDPSCs) and gingival fibroblasts (HGFs). Q@HMSNs effectively occluded the dentinal tubules, resulting in a thicker DOM in the Q@HMSN group. The CLSM images showed more superficial penetration in the HMSN and Q@HMSN groups than in the quercetin, NaF, and DW groups. The Q@HMSN group exhibited a significantly lower EDL and reduced ICTP levels compared to the other groups (p < 0.05). Conclusion: Q@HMSNs hold promise for inhibiting dentine erosion and abrasion by promoting tubule occlusion and DOM preservation.
Collapse
Affiliation(s)
- Jia-Min Chen
- Fujian Key Laboratory of Oral Diseases and Fujian Provincial Engineering Research Center of Oral Biomaterial and Stomatological Key Laboratory of Fujian College and University, School and Hospital of Stomatology, Fujian Medical University, Fuzhou, China
| | - Yi-Ling Cheng
- Fujian Key Laboratory of Oral Diseases and Fujian Provincial Engineering Research Center of Oral Biomaterial and Stomatological Key Laboratory of Fujian College and University, School and Hospital of Stomatology, Fujian Medical University, Fuzhou, China
| | - Meng-Hui Yang
- Fujian Key Laboratory of Oral Diseases and Fujian Provincial Engineering Research Center of Oral Biomaterial and Stomatological Key Laboratory of Fujian College and University, School and Hospital of Stomatology, Fujian Medical University, Fuzhou, China
| | - Chen Su
- Fujian Key Laboratory of Oral Diseases and Fujian Provincial Engineering Research Center of Oral Biomaterial and Stomatological Key Laboratory of Fujian College and University, School and Hospital of Stomatology, Fujian Medical University, Fuzhou, China
| | - Hao Yu
- Fujian Key Laboratory of Oral Diseases and Fujian Provincial Engineering Research Center of Oral Biomaterial and Stomatological Key Laboratory of Fujian College and University, School and Hospital of Stomatology, Fujian Medical University, Fuzhou, China
- Department of Prosthodontics, School and Hospital of Stomatology, Fujian Medical University, Fuzhou, China
- Clinic for Conservative and Preventive Dentistry, Center of Dental Medicine, University Zurich, Zurich, Switzerland
- Department of Applied Prosthodontics, Graduate School of Biomedical Sciences, Nagasaki University, Nagasaki, Japan
| |
Collapse
|
7
|
Tandecka K, Kacalak W, Wiliński M, Wieczorowski M, Mathia TG. Morphology of Microchips in the Surface Finishing Process Utilizing Abrasive Films. Materials (Basel) 2024; 17:688. [PMID: 38591557 PMCID: PMC10856731 DOI: 10.3390/ma17030688] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/12/2023] [Revised: 01/20/2024] [Accepted: 01/29/2024] [Indexed: 04/10/2024]
Abstract
In this study, the surface of new lapping films was analyzed, and the lapping finishing process was applied to RG7 tin bronze alloy. The research focused on examining lapping films with electrocorundum grains of nominal sizes 30, 12, and 9 μm, commonly used for achieving smooth surfaces. The manufacturing process involves placing abrasive grains and binder onto a polyester tape, resulting in a heterogeneous distribution of abrasive grains. The study investigates the impact of this random distribution on the performance of lapping films during material removal. Scanning electron microscopy was used to analyze the surface structure of abrasive films, revealing distinctive structures formed by the specific aggregation of abrasive grains. This study explores the influence of different nominal grain sizes on surface finish and aims to optimize lapping processes for diverse applications. The research also delves into microchip analysis, examining the products of the lapping film finishing process. Microchips were observed directly on the abrasive tool surface, revealing insights into their morphology and distribution. The chip segmentation frequency was determined, and they amounted to approximately 0.8 to 3 MHz; these are very high frequencies, which are unique for known chip-forming processes.
Collapse
Affiliation(s)
- Katarzyna Tandecka
- Department of Engineering and Informatics Systems, Faculty of Mechanical Engineering, Koszalin University of Technology, 75-620 Koszalin, Poland
| | - Wojciech Kacalak
- Department of Engineering and Informatics Systems, Faculty of Mechanical Engineering, Koszalin University of Technology, 75-620 Koszalin, Poland
| | - Maciej Wiliński
- Department of Engineering and Informatics Systems, Faculty of Mechanical Engineering, Koszalin University of Technology, 75-620 Koszalin, Poland
| | - Michał Wieczorowski
- Faculty of Mechanical Engineering, Institute of Applied Mechanics, Poznan University of Technology, 3 Piotrowo St., 60-965 Poznan, Poland
| | - Thomas G Mathia
- Laboratoire de Tribologie et Dynamique des Systemes (LTDS), Ecole Centrale de Lyon, Centre National de la Recherche Scientifique, 69134 Lyon, France
| |
Collapse
|
8
|
Henke M, Lis B, Krystofiak T. Mechanical and Chemical Resistance of UV Coating Systems Prepared under Industrial Conditions Using LED Radiation. Polymers (Basel) 2023; 15:4550. [PMID: 38231990 PMCID: PMC10708474 DOI: 10.3390/polym15234550] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/01/2023] [Revised: 11/12/2023] [Accepted: 11/24/2023] [Indexed: 01/19/2024] Open
Abstract
The furniture industry constantly strives to search for ecological and cost-effective solutions in the production of wood-based composites. It is anticipated that furniture with a honeycomb core and HDF-facing will gain market share. Understanding how specific technical and procedural factors on the finishing line affect the resistance of coatings on furniture elements made of honeycomb boards was the main goal of the study. With the use of a digital microscope, the roughness of two different types of HDF was tested. On the industrial UV LED+Hg finishing line, 198 different surface coating variations were produced by applying five or six layers of varnish applied, ranging from 3 to 30 g/m2 and hardening them with various surface power densities. On the basis of statistical tests, the influence of individual factors on abrasion, impact, and scratch resistance was determined. The nanointendence test of the coatings was used to measure the hardness and elasticity modulus. The coloring caused by coffee traces was checked using a colorimeter. The findings confirm the conception that LED+Hg lamp modules can replace mercury and gallium-doped mercury lamps.
Collapse
Affiliation(s)
| | - Barbara Lis
- Department of Wood Science and Thermal Techniques, Faculty of Forestry and Wood Technology, Poznan University of Life Sciences, Wojska Polskiego 28, 60-627 Poznan, Poland;
| | - Tomasz Krystofiak
- Department of Wood Science and Thermal Techniques, Faculty of Forestry and Wood Technology, Poznan University of Life Sciences, Wojska Polskiego 28, 60-627 Poznan, Poland;
| |
Collapse
|
9
|
Carneiro JR, Almeida F, Carvalho F, Lopes MDL. Tensile and Tearing Properties of a Geocomposite Mechanically Damaged by Repeated Loading and Abrasion. Materials (Basel) 2023; 16:7047. [PMID: 37959644 PMCID: PMC10648132 DOI: 10.3390/ma16217047] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/06/2023] [Revised: 10/30/2023] [Accepted: 11/03/2023] [Indexed: 11/15/2023]
Abstract
The behaviour of geosynthetics can be affected by many agents, both in the short and long term. Mechanical damage caused by repeated loading or abrasion are examples of agents that may induce undesirable changes in the properties of geosynthetics. The research conducted in this work complemented previous studies and consisted of submitting a geocomposite, isolated and successively, to two degradation tests: mechanical damage under repeated loading and abrasion. The geocomposite (a nonwoven geotextile reinforced with polyethylene terephthalate filaments) was tested on both sides (with or without filaments) and directions (machine and cross-machine). The impact of the degradation tests on the geocomposite was quantified by monitoring changes in its tensile and tearing behaviour. The results showed that, in most cases, the degradation tests caused the deterioration of the tensile and tearing behaviour of the geocomposite, affecting its reinforcement function. The decline in tensile strength correlated reasonably well with the decline in tearing strength. Changing the side and direction tested influenced, in some cases (those involving abrasion), the degradation experienced by the geocomposite. The reduction factors (referring to tensile and tearing strength) for the combined effect of the degradation agents tended to be lower when determined by using the common method (compared to those resulting directly from the successive exposure to both agents).
Collapse
Affiliation(s)
- José Ricardo Carneiro
- CONSTRUCT, Department of Civil Engineering, Faculty of Engineering, University of Porto, Rua Dr. Roberto Frias, 4200-465 Porto, Portugal; (F.A.); (F.C.); (M.d.L.L.)
| | | | | | | |
Collapse
|
10
|
Xu J, Lu H, Cai L, Liao Y, Lian J. Surface Protection Technology for Metallic Materials in Marine Environments. Materials (Basel) 2023; 16:6822. [PMID: 37895802 PMCID: PMC10608535 DOI: 10.3390/ma16206822] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/13/2023] [Revised: 10/19/2023] [Accepted: 10/20/2023] [Indexed: 10/29/2023]
Abstract
As the demand for the development and utilization of marine resources continues to strengthen, the service requirements for advanced marine equipment are rapidly increasing. Surface protection technology has become an important way of solving the tribological problems of extreme operating conditions and improving the safety performance of equipment by imparting certain special properties to the surface of the material through physical, chemical or mechanical processes to enhance the ability of the material to withstand external environmental factors. Combined with the extremely complex characteristics of the marine environment, this paper describes the commonly used surface protection technologies for metal materials in the marine environment. Research on surface texture was summarized under different surface reshaping technologies, as well as processes and coating materials under different surface modification technologies. Combined with the existing research progress and development trends of marine metallic materials, the surfaces of metal materials under the marine environment protection technology foreground are prospected and provide a reference for the improvement of equipment performance in extreme marine environments.
Collapse
Affiliation(s)
- Jing Xu
- School of Mechanical Engineering, Hangzhou Dianzi University, Hangzhou 310018, China; (J.X.); (H.L.); (L.C.); (Y.L.)
| | - Hao Lu
- School of Mechanical Engineering, Hangzhou Dianzi University, Hangzhou 310018, China; (J.X.); (H.L.); (L.C.); (Y.L.)
| | - Linxuan Cai
- School of Mechanical Engineering, Hangzhou Dianzi University, Hangzhou 310018, China; (J.X.); (H.L.); (L.C.); (Y.L.)
| | - Yihong Liao
- School of Mechanical Engineering, Hangzhou Dianzi University, Hangzhou 310018, China; (J.X.); (H.L.); (L.C.); (Y.L.)
| | - Jiadi Lian
- Department of Mechanical Engineering, China Jiliang University, Hangzhou 310018, China
| |
Collapse
|
11
|
Siskey RL, Yarbrough RV, Spece H, Hodges SD, Humphreys SC, Kurtz SM. In Vitro Wear of a Novel Vitamin E Crosslinked Polyethylene Lumbar Total Joint Replacement. Bioengineering (Basel) 2023; 10:1198. [PMID: 37892928 PMCID: PMC10604298 DOI: 10.3390/bioengineering10101198] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/25/2023] [Revised: 10/06/2023] [Accepted: 10/12/2023] [Indexed: 10/29/2023] Open
Abstract
BACKGROUND A novel, lumbar total joint replacement (TJR) design has been developed to treat degeneration across all three columns of the lumbar spine (anterior, middle, and posterior columns). Thus far, there has been no in vitro studies that establish the preclinical safety profile of the vitamin E-stabilized highly crosslinked polyethylene (VE-HXLPE) lumbar TJR relative to historical lumbar anterior disc replacement for the known risks of wear and impingement faced by all motion preserving designs for the lumbar spine. QUESTIONS/PURPOSE In this study we asked, (1) what is the wear performance of the VE-HXLPE lumbar TJR under ideal, clean conditions? (2) Is the wear performance of VE-HXLPE in lumbar TJR sensitive to more aggressive, abrasive conditions? (3) How does the VE-HXLPE lumbar TJR perform under impingement conditions? METHOD A lumbar TJR with bilateral VE-HXLPE superior bearings and CoCr inferior bearings was evaluated under clean, impingement, and abrasive conditions. Clean and abrasive testing were guided by ISO 18192-1 and impingement was assessed as per ASTM F3295. For abrasive testing, CoCr components were scratched to simulate in vivo abrasion. The devices were tested for 10 million cycles (MC) under clean conditions, 5 MC under abrasion, and 1 MC under impingement. RESULT Wear rates under clean and abrasive conditions were 1.2 ± 0.5 and 1.1 ± 0.6 mg/MC, respectively. The VE-HXLPE components demonstrated evidence of burnishing and multidirectional microscratching consistent with microabrasive conditions with the cobalt chromium spherical counterfaces. Under impingement, the wear rates ranged between 1.7 ± 1.1 (smallest size) and 3.9 ± 1.1 mg/MC (largest size). No functional or mechanical failure was observed across any of the wear modes. CONCLUSIONS Overall, we found that that a VE-HXLPE-on-CoCr lumbar total joint replacement design met or exceeded the benchmarks established by traditional anterior disc replacements, with wear rates previously reported in the literature ranging between 1 and 15 mg/MC. CLINICAL RELEVANCE The potential clinical benefits of this novel TJR design, which avoids long-term facet complications through facet removal with a posterior approach, were found to be balanced by the in vitro tribological performance of the VE-HXLPE bearings. Our encouraging in vitro findings have supported initiating an FDA-regulated clinical trial for the design which is currently under way.
Collapse
Affiliation(s)
| | | | - Hannah Spece
- School of Biomedical Engineering, Science, and Health Systems, Drexel University, Philadelphia, PA 19104, USA
| | | | | | - Steven M. Kurtz
- School of Biomedical Engineering, Science, and Health Systems, Drexel University, Philadelphia, PA 19104, USA
| |
Collapse
|
12
|
Mrówka M, Franke D, Ošlejšek M, Jureczko M. Influence of Citrus Fruit Waste Filler on the Physical Properties of Silicone-Based Composites. Materials (Basel) 2023; 16:6569. [PMID: 37834706 PMCID: PMC10573941 DOI: 10.3390/ma16196569] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/27/2023] [Revised: 07/31/2023] [Accepted: 08/04/2023] [Indexed: 10/15/2023]
Abstract
Silicones have been used as protective coatings due to their resistance to hydrolytic degradation and UV (ultraviolet) degradation. There is a growing problem with managing organic waste, which can be used as fillers in composites. This research demonstrated the use of organic waste from citrus peels, including grapefruit, lime, lemon, and orange peels. Silicone-based composites were prepared by gravity-casting using 2.5, 5, and 10 wt.% waste filler. Samples made from the composite panels were subjected to static tensile, density, hardness, pin-on-disc, and Schopper-Schlobach abrasion tests. The test results showed that lower tensile strength values characterized the composite materials compared to the silicone used as a filler. All materials had greater hardness than the silicone without the addition. At the same time, composites with a mass density of the filler of 2.5 and 5 wt.% showed more excellent abrasion resistance than the silicone used as a matrix. This research showed that the samples containing 2.5 wt.% grapefruit filler had the best mechanical properties and the lowest abrasive wear.
Collapse
Affiliation(s)
- Maciej Mrówka
- Department of Material Technologies, Faculty of Materials Engineering, Silesian University of Technology, Krasińskiego 8, 40-019 Katowice, Poland
- Material Innovations Laboratory, Silesian University of Technology, Krasińskiego 8, 40-019 Katowice, Poland
| | - Dawid Franke
- Department of Geoengineering and Resource Exploitation, Faculty of Mining, Safety Engineering and Industrial Automation, Akademicka 2A, 44-100 Gliwice, Poland;
| | - Martin Ošlejšek
- Department of English and American Studies, Faculty of Arts, Palacký University Olomouc, Křížkovského 10, 779 00 Olomouc, Czech Republic;
| | - Mariola Jureczko
- Department of Theoretical and Applied Mechanics, Faculty of Mechanical Engineering, Silesian University of Technology, Konarskiego 18A, 44-100 Gliwice, Poland;
| |
Collapse
|
13
|
Oudkerk J, Grenade C, Davarpanah A, Vanheusden A, Vandenput S, Mainjot AK. Risk factors of tooth wear in permanent dentition: A scoping review. J Oral Rehabil 2023; 50:1110-1165. [PMID: 37147932 DOI: 10.1111/joor.13489] [Citation(s) in RCA: 6] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/25/2022] [Revised: 03/20/2023] [Accepted: 04/22/2023] [Indexed: 05/07/2023]
Abstract
BACKGROUND Tooth wear (TW) prevalence is high and increasing and has important consequences on the patient's quality of life. Knowledge of risk factors is crucial to promote diagnosis, prevention strategies and timely interceptive treatment. Many studies have identified TW risk factors. OBJECTIVE This scoping review aims to map and describe suspected available factors associated with TW in permanent dentition based on quantitative measurement. METHODS The scoping review was conducted using the PRISMA extension of the Scoping Reviews checklist. The search was conducted in October 2022 from the Medline® (PubMed® interface) and Scopus® databases. Two independent reviewers selected and characterised the studies. RESULTS 2702 articles were identified for assessment of titles and abstracts, and 273 articles were included in the review. The results show a need to standardise TW measurement indices and the study design. The included studies highlighted various factors, classified into nine domains: sociodemographic factors, medical history, drinking habits, eating habits, oral hygiene habits, dental factors, bruxism and temporomandibular disorders, behavioural factors, and stress. Results related to chemical TW (erosion) risk factors underline the importance of eating disorders, gastroesophageal reflux and lifestyle, particularly drinking and eating behaviours, which supports developing public health information campaigns and interventions. Besides chemical, this review identifies evidence of several mechanical TW risk factors, such as toothbrushing and bruxism; the influence of this last factor needs to be further explored. CONCLUSIONS TW management and prevention require a multidisciplinary approach. Dentists are in the first line to detect associated diseases such as reflux or eating disorders. Consequently, practitioners' information and guideline diffusion should be promoted, and a TW risk factors checklist (the ToWeR checklist) is proposed to help diagnostic approaches.
Collapse
Affiliation(s)
- Julie Oudkerk
- Dental Biomaterials Research Unit (d-BRU), Institute of Dentistry, University of Liège (ULiège), Liège, Belgium
- Department of Fixed Prosthodontics, Institute of Dentistry, University of Liège Hospital (CHU), Liège, Belgium
| | - Charlotte Grenade
- Dental Biomaterials Research Unit (d-BRU), Institute of Dentistry, University of Liège (ULiège), Liège, Belgium
- Department of Fixed Prosthodontics, Institute of Dentistry, University of Liège Hospital (CHU), Liège, Belgium
| | - Anoushka Davarpanah
- Dental Biomaterials Research Unit (d-BRU), Institute of Dentistry, University of Liège (ULiège), Liège, Belgium
| | - Alain Vanheusden
- Dental Biomaterials Research Unit (d-BRU), Institute of Dentistry, University of Liège (ULiège), Liège, Belgium
- Department of Fixed Prosthodontics, Institute of Dentistry, University of Liège Hospital (CHU), Liège, Belgium
| | | | - Amélie K Mainjot
- Dental Biomaterials Research Unit (d-BRU), Institute of Dentistry, University of Liège (ULiège), Liège, Belgium
- Department of Fixed Prosthodontics, Institute of Dentistry, University of Liège Hospital (CHU), Liège, Belgium
| |
Collapse
|
14
|
Lee JCM, Burrow MF, Botelho MG. A qualitative analysis of dentists' understanding and management of non-carious cervical lesions (NCCL). J Dent 2023; 136:104640. [PMID: 37516340 DOI: 10.1016/j.jdent.2023.104640] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/20/2023] [Revised: 07/25/2023] [Accepted: 07/27/2023] [Indexed: 07/31/2023] Open
Abstract
INTRODUCTION Non-carious cervical lesions (NCCLs) are considered to have a multi-factorial aetiology and their management is affected by a range of variables perhaps most importantly clinical judgement. The aim of this study was to elicit information from practicing dentists, using interviews, to explore their understanding of NCCL aetiology, the decision-making criteria of when to restore, and the restorative techniques used to restore NCCLs. This may help identify gaps or anomalies in our understanding to inform future research and clinical practice for the management of NCCLs. METHODS An interview guide was developed from a literature search which formed 2 domains framed around understanding and management of NCCLs based on: understanding of diagnosis and aetiology, and factors affecting decision making for management. Practicing dentists with more than 10 years of experience were purposively recruited to conduct in-depth, semi-structured interviews. Fifteen interviews were audio recorded and transcribed verbatim. A thematic content analysis was conducted and the results analysed. RESULTS From the thematic analysis, 2 domains were identified. In the domain of "diagnosis and aetiology", while participants have similar understanding and methods of diagnosing NCCL, most stated NCCLs in a patient were caused by a "main aetiology" such as "abrasion", "abfraction" while few described the inter-relationship of these aetiological factors. In the domain of "factors affecting decision making". "Patient reported symptoms" and "lesion dimension" were the main factors that affected participants' decision to provide restorative or non-restorative management. However, a "restorative threshold" was not able to be identified. CONCLUSION There was notable variety in participants' understanding of the aetiology, management, and treatment of NCCLs, particularly the restorative threshold of when to treat. CLINICAL SIGNIFICANCE The variability demonstrates the need to have a clearer understanding of the key elements that affect the management of NCCLs and better information to support the decision of when to treat.
Collapse
Affiliation(s)
- Johnson Chun Ming Lee
- Prince Philip Dental Hospital, 34 Hospital road, University of Hong Kong, Hong Kong, SAR China
| | - Michael Francis Burrow
- Prince Philip Dental Hospital, 34 Hospital road, University of Hong Kong, Hong Kong, SAR China
| | - Michael George Botelho
- Prince Philip Dental Hospital, 34 Hospital road, University of Hong Kong, Hong Kong, SAR China.
| |
Collapse
|
15
|
Moda MD, Dos Santos PH, Pini NIP, Furini LN, Briso ALF, Assmann A, Fagundes TC. Effects of Different Toothpastes on the Nanomechanical Properties and Chemical Composition of Resin-Modified Glass Ionomer Cement and Composite Resin Restorations. Dent J (Basel) 2023; 11:173. [PMID: 37504240 PMCID: PMC10378367 DOI: 10.3390/dj11070173] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/30/2023] [Revised: 07/04/2023] [Accepted: 07/11/2023] [Indexed: 07/29/2023] Open
Abstract
PURPOSE This study evaluates the effects of different toothpastes on the nanohardness and chemical compositions of restorative materials and dental surfaces. METHODS Bovine enamel (n = 72) and dentin (n = 72) blocks were obtained and restored using RMGIC (n = 36) or CR (n = 36) to create the following surfaces: dentin adjacent to RMGIC (DRMGIC), enamel adjacent to RMGIC (ERMGIC), dentin adjacent to CR (DCR), and enamel adjacent to CR (ECR). After restoration, one hemiface of each specimen was coated with an acid-resistant varnish to facilitate the creation of control (C) and eroded (E) sides; the latter were achieved by erosion-abrasion cycles as follows: erosion with 1% citric acid: 5 days, four times for 2 min each day; 1% citric acid/abrasion, two times for 15 s, followed by immersion in a toothpaste slurry for 2 min. Toothpastes without fluoride (WF; n = 12), with sodium fluoride (NaF; n = 12), and with stannous fluoride (SnF2; n = 12) were used for RMGIC or CR. The specimens were analyzed for nanohardness (H), and chemical composition using energy-dispersive X-ray spectroscopy and Raman microscopy. The data were statistically analyzed using two-way repeated measures ANOVA and Tukey's test (α = 0.05). RESULTS Lower H values were obtained with NaF for DRMGIC-C, with a statistically significant difference from the H value obtained with WF (p < 0.05). The calcium and phosphorus concentrations in DCR-E were significantly lower with WF than with the other types of toothpaste (p < 0.05). Fluoride-containing toothpastes are capable of preserving the main chemical components of the dentin adjacent to the restorative materials under erosive-abrasive conditions.
Collapse
Affiliation(s)
- Mariana Dias Moda
- Department of Preventive and Restorative Dentistry, Araçatuba School of Dentistry, São Paulo State University (UNESP), Araçatuba 16015-050, SP, Brazil
| | - Paulo Henrique Dos Santos
- Faculty of Dentistry, Dental Research Institute-Restorative Dentistry, University of Toronto, Toronto, ON M5S 1A1, Canada
| | - Nubia Inocencya Pavesi Pini
- Department of Preventive and Restorative Dentistry, Araçatuba School of Dentistry, São Paulo State University (UNESP), Araçatuba 16015-050, SP, Brazil
| | - Leonardo Negri Furini
- Department of Physics, Federal University of Santa Catarina, Florianópolis 88040-900, SC, Brazil
| | - André Luiz Fraga Briso
- Department of Preventive and Restorative Dentistry, Araçatuba School of Dentistry, São Paulo State University (UNESP), Araçatuba 16015-050, SP, Brazil
| | - André Assmann
- Department of Engineering and Exact Sciences, Federal University of Paraná, Palotina 85950-000, PR, Brazil
| | - Ticiane Cestari Fagundes
- Department of Preventive and Restorative Dentistry, Araçatuba School of Dentistry, São Paulo State University (UNESP), Araçatuba 16015-050, SP, Brazil
| |
Collapse
|
16
|
Erdogan G, Yucel S, Bilisik K. Textured Polyester Fiber in Three-Dimensional (3D) Carpet Structure Application: Experimental Characterizations under Compression-Bending- Abrasion-Rubbing Loading. Polymers (Basel) 2023; 15:3006. [PMID: 37514396 PMCID: PMC10383248 DOI: 10.3390/polym15143006] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/15/2023] [Revised: 06/26/2023] [Accepted: 07/03/2023] [Indexed: 07/30/2023] Open
Abstract
In this article, textured polyester fiber was used as pile yarn in three-dimensional woven carpet structures. The properties of developed polyester carpets under various mechanical loading were studied. A statistical method was used to analyze the experimental data. Regression models were proposed to explain the relationships between carpet pile height and density. The study showed that the bending rigidity and curvature of dry and wet polyester pile fiber carpets were influenced by pile height and pile density (indirectly weft density) in that the downward concave large bending curvature was obtained from very dense carpet structures. In addition, the average dry bending rigidity of the carpet was over eight times higher than the average wet bending rigidity of the carpet. The thickness loss (%) and resilience (%) for each recovery period of various polyester carpets were proportional depending on the pile density. It was broadly decreased when the pile density was increased due to the compression load carrying capacity per polyester fiber knot, which was higher in carpets having dense knots compared to sparse knots per area. On the other hand, the polyester pile density and height largely affected the carpet mass losses (%) of all textured polyester carpets under an abrasion load. The number of strokes received after completely fractured polyester pile yarns during a rubbing test were increased when the pile heights for each pile density were increased. Findings from the study can be useful for polyester carpet designers and three-dimensional dry or impregnate polyester fiber-based preform designers in particularly complex shape molding part manufacturing.
Collapse
Affiliation(s)
- Gulhan Erdogan
- Department of Textile Engineering, Faculty of Engineering, Erciyes University, Talas, Kayseri 38039, Turkey
| | - Sinem Yucel
- Uniteks Tekstil, Atatürk Organize Sanayi Bölgesi, 10039 sokak, No. 26, Çiğli, İzmir 35620, Turkey
| | - Kadir Bilisik
- Department of Textile Engineering, Faculty of Engineering, Erciyes University, Talas, Kayseri 38039, Turkey
- Nanotechnology Application and Research Centre (ERNAM), Erciyes University, Talas9, Kayseri 3803, Turkey
| |
Collapse
|
17
|
Srivastava R, Tangade P, Singh V, Priyadarshi S, Dalai S, Agarahari P, Subhangi S, Kumari T, Singh AK, Singh PK. Chewing Ability and the Quality of Life: A Cross-Sectional Study to Assess the Relationship Between Tooth Wear and Oral Health. Cureus 2023; 15:e41906. [PMID: 37588299 PMCID: PMC10425605 DOI: 10.7759/cureus.41906] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/28/2023] [Accepted: 07/14/2023] [Indexed: 08/18/2023] Open
Abstract
INTRODUCTION It is important to understand how a very common prevalent condition of tooth wear (TW) impacts a person's day-to-day oral health. An emerging concept of measuring the parameter of oral health-related quality of life (OHRQoL), which evidently impacts the daily living of a person, makes it practical to examine the correlation between TW and OHRQoL. For measuring the OHRQoL, we can apply various methods, and the most effective is the use of the Oral Health Impact Profile (OHIP) questionnaire. Accordingly, the aim of this study was to assess the correlation between TW and the OHRQoL among adult patients attending a dental college and hospital. METHODS A cross-sectional research was performed on patients who visited the outpatient department of Teerthanker Mahaveer Dental College and Research Centre, Moradabad, India. Initially, the sociodemographic details of patients, including their oral hygiene and dietary habits, were recorded. This step was followed by the assessment of TW using the Smith and Knight TW index. Then, the translated and validated version of the OHIP questionnaire was filled up, in which the patients were asked to rate each question on a Likert scale, with five points ranging from 0 to 4, where 0 = never, 1 = hardly ever, 2 = occasionally, 3 = fairly often, and 4 = very often. RESULTS Based on a clinical examination on 630 subjects and the OHIP questionnaire responses from the participants, a significantly remarkable association (p ≤ 0.05) was found using a chi-square test between TW and the OHRQoL. In particular, TW was linked to other sociodemographic data and various lifestyle, dietary, and drinking habits. Along with the OHRQoL, TW also showed a positive correlation with gender. Using the chi-square test, a statistically significant association between age and TW was observed, with p-value = 0.004. Meanwhile, the place of residence did not show any association with TW. Educational qualifications of patients, visits to dental clinics, and reasons for dental visits showed very significant association with TW. Oral hygiene aids, materials used, frequency of brushing, and brushing technique did not have any association with TW as per the results obtained. A highly significant association was found between consumption of fruit drinks, citric drinks, and beverages and TW in the adult patients. Among all the domains of the OHIP questionnaire, the physical pain domain was the most affected, followed by the physical disability domain. CONCLUSION We conclude that TW has a direct association and positive correlation with the OHRQoL. As TW was increasing, so were the OHIP values, which indicated a lesser OHRQoL. The study also presents information on how to maintain a regular and healthy dietary lifestyle and oral hygiene to combat the impacts of TW.
Collapse
Affiliation(s)
- Rangoli Srivastava
- Department of Public Health Dentistry, Teerthanker Mahaveer Dental College and Research Centre, Moradabad, IND
| | - Pradeep Tangade
- Department of Public Health Dentistry, Teerthanker Mahaveer Dental College and Research Centre, Moradabad, IND
| | - Vikas Singh
- Department of Public Health Dentistry, Teerthanker Mahaveer Dental College and Research Centre, Moradabad, IND
| | - Surbhi Priyadarshi
- Department of Public Health Dentistry, SGT University (Shree Guru Gobind Singh Tricentenary University) Faculty of Dental Sciences, Gurugram, IND
| | - Sasmita Dalai
- Department of Public Health Dentistry, Adesh Institute of Dental Sciences and Research, Bathinda, IND
| | - Priya Agarahari
- Department of Public Health Dentistry, Teerthanker Mahaveer Dental College and Research Centre, Moradabad, IND
| | - Sonal Subhangi
- Department of Public Health Dentistry, Teerthanker Mahaveer Dental College and Research Centre, Moradabad, IND
| | - Tannu Kumari
- Department of Public Health Dentistry, Teerthanker Mahaveer Dental College and Research Centre, Moradabad, IND
| | - Ashutosh K Singh
- Department of Public Health Dentistry, Teerthanker Mahaveer Dental College and Research Centre, Moradabad, IND
| | - Prabhat K Singh
- Department of Public Health Dentistry, Teerthanker Mahaveer Dental College and Research Centre, Moradabad, IND
| |
Collapse
|
18
|
Ha JU, Bae SH, Choi YJ, Lee PC, Jeoung SK, Song S, Choi C, Lee JS, Kim J, Han IS. Control of Tire Wear Particulate Matter through Tire Tread Prescription. Polymers (Basel) 2023; 15:2795. [PMID: 37447442 DOI: 10.3390/polym15132795] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/15/2023] [Revised: 06/15/2023] [Accepted: 06/20/2023] [Indexed: 07/15/2023] Open
Abstract
This study aims to analyze tire wear particulate matter (TWP) from tread rubber with different formulations and to compare the concentration of TWP with different wear devices. The TWP generated during the abrasion of truck and bus radial (TBR) tires were examined, and the effect of using different types of rubber and carbon black (CB) were investigated. When natural rubber (NR) was solely used as the tire tread rubber material, there was a higher concentration of 5-10 µm TWP. However, when the tread formulation consisted of NR mixed with butadiene rubber, the TWP concentration decreased. Changing the type of CB also reduced the amount of TWP in the 2.5 µm size range. The TWP concentration in the specimens increased with increasing speed and vertical load. The TWP generated during the abrasion tests using wear testers and tire simulators exhibited similar trends. These findings suggest that modifying tire tread formulations can effectively control the distribution and amount of TWP generation.
Collapse
Affiliation(s)
- Jin U Ha
- Chassis & Materials Research Laboratory, Korea Automotive Technology Institute, Cheonan-si 31214, Republic of Korea
| | - Seok H Bae
- Chassis & Materials Research Laboratory, Korea Automotive Technology Institute, Cheonan-si 31214, Republic of Korea
| | - Yu J Choi
- Chassis & Materials Research Laboratory, Korea Automotive Technology Institute, Cheonan-si 31214, Republic of Korea
| | - Pyoung-Chan Lee
- Chassis & Materials Research Laboratory, Korea Automotive Technology Institute, Cheonan-si 31214, Republic of Korea
| | - Sun K Jeoung
- Chassis & Materials Research Laboratory, Korea Automotive Technology Institute, Cheonan-si 31214, Republic of Korea
| | - Sanghoon Song
- School of Chemical Engineering, Pusan National University, Busan 46241, Republic of Korea
| | - Choong Choi
- R&D Department, Hankook Tire & Technology, Daejeon 34127, Republic of Korea
| | - Jae S Lee
- R&D Department, OCI, Sungnam-si 13212, Republic of Korea
| | - Jaeyun Kim
- R&D Department, Kumho Petrochemical, Daejeon 34044, Republic of Korea
| | - In S Han
- Interior & Exterior Materials Development Team, Hwaseong-si 18280, Republic of Korea
| |
Collapse
|
19
|
Henke M, Lis B, Krystofiak T. Mechanical and Chemical Resistance of UV Coating Systems Prepared under Industrial Conditions. Materials (Basel) 2023; 16:4468. [PMID: 37374652 DOI: 10.3390/ma16124468] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/08/2023] [Revised: 06/15/2023] [Accepted: 06/17/2023] [Indexed: 06/29/2023]
Abstract
In the upcoming years, it is expected that more furniture will be built from honeycomb panels due to the growing demand for lightweight, long-lasting furnishings. High-density fiberboard (HDF), previously used in the furniture industry as back walls in box furniture or drawer components, has become a popular facing material used in the production of honeycomb core panels. Varnishing the facing sheets of lightweight honeycomb core boards with the use of analog printing technology and UV lamps is a challenge for the industry. The aim of this study was to determine the effect of selected varnishing parameters on coating resistance by experimentally testing 48 coating variants. It was found that the interactions between the following variables were crucial in achieving adequate resistance: lamp power, the amounts of varnish applied, and the number of layers. The highest scratch, impact, and abrasion resistance values were observed for samples with optimal curing provided by more layers and maximum curing with 90 W/cm lamps. Based on the pareto chart, a model was generated that predicted the optimal settings for the highest scratch resistance. Resistance to cold liquids made with a colorimeter increases with lamp power.
Collapse
Affiliation(s)
- Milena Henke
- Department of Wood Science and Thermal Techniques, Faculty of Forestry and Wood Technology, Poznan University of Life Sciences, 60-627 Poznań, Poland
| | - Barbara Lis
- Department of Wood Science and Thermal Techniques, Faculty of Forestry and Wood Technology, Poznan University of Life Sciences, 60-627 Poznań, Poland
| | - Tomasz Krystofiak
- Department of Wood Science and Thermal Techniques, Faculty of Forestry and Wood Technology, Poznan University of Life Sciences, 60-627 Poznań, Poland
| |
Collapse
|
20
|
Silva G, Marto CM, Amaro I, Coelho A, Sousa J, Ferreira MM, Francisco I, Vale F, Oliveiros B, Carrilho E, Paula AB. Bulk-Fill Resins versus Conventional Resins: An Umbrella Review. Polymers (Basel) 2023; 15:2613. [PMID: 37376259 DOI: 10.3390/polym15122613] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/14/2023] [Revised: 06/02/2023] [Accepted: 06/06/2023] [Indexed: 06/29/2023] Open
Abstract
Currently, composite resins have become the material of choice for the restoration of posterior teeth. Although bulk-fill resins represent a tempting alternative due to their lower complexity and faster use, some dentists are reluctant to use this material. The objective is to compare the performance of bulk-fill resins and conventional resins in direct restorations of posterior teeth based on the literature. The databases that were used to carry out the research were PubMed/MEDLINE, Embase, the Cochrane Library and the WOS. This umbrella literature review complies with PRISMA standards and assesses the quality of studies using the AMSTAR 2 tool. With the application of the criteria of the AMSTAR 2 tool, the reviews were considered low to moderate. The overall meta-analysis, although without statistical significance, favours mostly the use of conventional resin, as it is about five times more likely to obtain a favourable result than bulk-fill resin. Bulk-fill resins result in a simplification of the clinical process of posterior direct restorations, which is an advantage. The performance in terms of several properties of bulk-fill resins and conventional resins showed that they present similar behaviour.
Collapse
Affiliation(s)
- Gonçalo Silva
- Institute of Integrated Clinical Practice, Faculty of Medicine, University of Coimbra, 3000-354 Coimbra, Portugal
| | - Carlos Miguel Marto
- Institute of Integrated Clinical Practice, Faculty of Medicine, University of Coimbra, 3000-354 Coimbra, Portugal
- Laboratory for Evidence-Based Sciences and Precision Dentistry (LACBE-MDP), Faculty of Medicine, University of Coimbra, 3000-354 Coimbra, Portugal
- Institute for Clinical and Biomedical Research (iCBR), Area of Environment Genetics and Oncobiology (CIMAGO), Faculty of Medicine, University of Coimbra, 3000-354 Coimbra, Portugal
- Institute of Experimental Pathology, Faculty of Medicine, University of Coimbra, 3000-354 Coimbra, Portugal
- Clinical Academic Center of Coimbra (CACC), 3000-354 Coimbra, Portugal
- Center for Innovative Biomedicine and Biotecnhology (CIBB), 3000-354 Coimbra, Portugal
| | - Inês Amaro
- Institute of Integrated Clinical Practice, Faculty of Medicine, University of Coimbra, 3000-354 Coimbra, Portugal
- Laboratory for Evidence-Based Sciences and Precision Dentistry (LACBE-MDP), Faculty of Medicine, University of Coimbra, 3000-354 Coimbra, Portugal
- Institute for Clinical and Biomedical Research (iCBR), Area of Environment Genetics and Oncobiology (CIMAGO), Faculty of Medicine, University of Coimbra, 3000-354 Coimbra, Portugal
- Clinical Academic Center of Coimbra (CACC), 3000-354 Coimbra, Portugal
- Center for Innovative Biomedicine and Biotecnhology (CIBB), 3000-354 Coimbra, Portugal
| | - Ana Coelho
- Institute of Integrated Clinical Practice, Faculty of Medicine, University of Coimbra, 3000-354 Coimbra, Portugal
- Laboratory for Evidence-Based Sciences and Precision Dentistry (LACBE-MDP), Faculty of Medicine, University of Coimbra, 3000-354 Coimbra, Portugal
- Institute for Clinical and Biomedical Research (iCBR), Area of Environment Genetics and Oncobiology (CIMAGO), Faculty of Medicine, University of Coimbra, 3000-354 Coimbra, Portugal
- Clinical Academic Center of Coimbra (CACC), 3000-354 Coimbra, Portugal
- Center for Innovative Biomedicine and Biotecnhology (CIBB), 3000-354 Coimbra, Portugal
| | - José Sousa
- Institute of Integrated Clinical Practice, Faculty of Medicine, University of Coimbra, 3000-354 Coimbra, Portugal
- Laboratory for Evidence-Based Sciences and Precision Dentistry (LACBE-MDP), Faculty of Medicine, University of Coimbra, 3000-354 Coimbra, Portugal
| | - Manuel Marques Ferreira
- Laboratory for Evidence-Based Sciences and Precision Dentistry (LACBE-MDP), Faculty of Medicine, University of Coimbra, 3000-354 Coimbra, Portugal
- Institute for Clinical and Biomedical Research (iCBR), Area of Environment Genetics and Oncobiology (CIMAGO), Faculty of Medicine, University of Coimbra, 3000-354 Coimbra, Portugal
- Clinical Academic Center of Coimbra (CACC), 3000-354 Coimbra, Portugal
- Center for Innovative Biomedicine and Biotecnhology (CIBB), 3000-354 Coimbra, Portugal
- Institute of Endodontics, Faculty of Medicine, University of Coimbra, 3000-354 Coimbra, Portugal
| | - Inês Francisco
- Laboratory for Evidence-Based Sciences and Precision Dentistry (LACBE-MDP), Faculty of Medicine, University of Coimbra, 3000-354 Coimbra, Portugal
- Institute for Clinical and Biomedical Research (iCBR), Area of Environment Genetics and Oncobiology (CIMAGO), Faculty of Medicine, University of Coimbra, 3000-354 Coimbra, Portugal
- Clinical Academic Center of Coimbra (CACC), 3000-354 Coimbra, Portugal
- Center for Innovative Biomedicine and Biotecnhology (CIBB), 3000-354 Coimbra, Portugal
- Institute of Orthodontics, Faculty of Medicine, University of Coimbra, 3000-354 Coimbra, Portugal
| | - Francisco Vale
- Laboratory for Evidence-Based Sciences and Precision Dentistry (LACBE-MDP), Faculty of Medicine, University of Coimbra, 3000-354 Coimbra, Portugal
- Institute for Clinical and Biomedical Research (iCBR), Area of Environment Genetics and Oncobiology (CIMAGO), Faculty of Medicine, University of Coimbra, 3000-354 Coimbra, Portugal
- Clinical Academic Center of Coimbra (CACC), 3000-354 Coimbra, Portugal
- Center for Innovative Biomedicine and Biotecnhology (CIBB), 3000-354 Coimbra, Portugal
- Institute of Orthodontics, Faculty of Medicine, University of Coimbra, 3000-354 Coimbra, Portugal
| | - Bárbara Oliveiros
- Laboratory for Evidence-Based Sciences and Precision Dentistry (LACBE-MDP), Faculty of Medicine, University of Coimbra, 3000-354 Coimbra, Portugal
- Institute for Clinical and Biomedical Research (iCBR), Area of Environment Genetics and Oncobiology (CIMAGO), Faculty of Medicine, University of Coimbra, 3000-354 Coimbra, Portugal
- Clinical Academic Center of Coimbra (CACC), 3000-354 Coimbra, Portugal
- Center for Innovative Biomedicine and Biotecnhology (CIBB), 3000-354 Coimbra, Portugal
- Laboratory of Biostatistics and Medical Informatics (LBIM), Faculty of Medicine, University of Coimbra, 3004-531 Coimbra, Portugal
| | - Eunice Carrilho
- Institute of Integrated Clinical Practice, Faculty of Medicine, University of Coimbra, 3000-354 Coimbra, Portugal
- Laboratory for Evidence-Based Sciences and Precision Dentistry (LACBE-MDP), Faculty of Medicine, University of Coimbra, 3000-354 Coimbra, Portugal
- Institute for Clinical and Biomedical Research (iCBR), Area of Environment Genetics and Oncobiology (CIMAGO), Faculty of Medicine, University of Coimbra, 3000-354 Coimbra, Portugal
- Clinical Academic Center of Coimbra (CACC), 3000-354 Coimbra, Portugal
- Center for Innovative Biomedicine and Biotecnhology (CIBB), 3000-354 Coimbra, Portugal
| | - Anabela Baptista Paula
- Institute of Integrated Clinical Practice, Faculty of Medicine, University of Coimbra, 3000-354 Coimbra, Portugal
- Laboratory for Evidence-Based Sciences and Precision Dentistry (LACBE-MDP), Faculty of Medicine, University of Coimbra, 3000-354 Coimbra, Portugal
- Institute for Clinical and Biomedical Research (iCBR), Area of Environment Genetics and Oncobiology (CIMAGO), Faculty of Medicine, University of Coimbra, 3000-354 Coimbra, Portugal
- Clinical Academic Center of Coimbra (CACC), 3000-354 Coimbra, Portugal
- Center for Innovative Biomedicine and Biotecnhology (CIBB), 3000-354 Coimbra, Portugal
- Institute of Orthodontics, Faculty of Medicine, University of Coimbra, 3000-354 Coimbra, Portugal
| |
Collapse
|
21
|
Terán JE, Pal L, Spontak RJ, Lucia L. Surface Mechanical Properties and Topological Characteristics of Thermoplastic Copolyesters after Precisely Controlled Abrasion. ACS Appl Mater Interfaces 2023; 15:7552-7561. [PMID: 36715689 DOI: 10.1021/acsami.2c19377] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/18/2023]
Abstract
Due to the high probability of surface-to-surface contact of materials during routine applications, surface abrasion remains one of the most challenging factors governing the long-term performance of polymeric materials due to their broad range of tunable mechanical properties, as well as the varied conditions of abrasion (regarding, e.g., rate, load, and contact area). While this concept is empirically mature, a fundamental understanding of mechanical abrasion regarding thermoplastics remains lacking even though polymer abrasion can inadvertently lead to the formation of nano-/microplastics. In the present study, we introduce the concept of precision polymer abrasion (PPA) in conjunction with nanoindentation to elucidate the extent to which controlled wear is experienced by three chemically related thermoplastics under systematically varied abrasion conditions. While depth profiling of one polymer reveals a probe-dependent change in modulus, complementary results from positron annihilation lifetime spectroscopy confirm that the polymer density changes measurably, but not appreciably, with depth over the depth range explored. After a single PPA pass, the surface moduli of the polymers noticeably increase, whereas the corresponding increase in hardness is modest. The dependence of wear volume on the number of PPA passes is observed to reach limiting values for two of the thermoplastics, and application of an empirical model to the data yields estimates of these values for all three thermoplastics. These results suggest that the metrics commonly employed to describe the surface abrasion of polymers requires careful consideration of a host of underlying factors.
Collapse
Affiliation(s)
- Julio E Terán
- Fiber and Polymer Science Program, North Carolina State University, Raleigh, North Carolina 27695, United States
| | - Lokendra Pal
- Department of Forest Biomaterials, North Carolina State University, Raleigh, North Carolina 27695, United States
| | - Richard J Spontak
- Department of Chemical & Biomolecular Engineering, North Carolina State University, Raleigh, North Carolina 27695, United States
- Department of Materials Science & Engineering, North Carolina State University, Raleigh, North Carolina 27695, United States
| | - Lucian Lucia
- Department of Forest Biomaterials, North Carolina State University, Raleigh, North Carolina 27695, United States
- Department of Chemistry, North Carolina State University, Raleigh, North Carolina 27695, United States
| |
Collapse
|
22
|
Mushtaq M, Qureshi OA, Dua A, Khan S, Mehraj M. Metallosis and Nonunion: A Case Series and Literature Review. Cureus 2023; 15:e35385. [PMID: 36994246 PMCID: PMC10042499 DOI: 10.7759/cureus.35385] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Accepted: 02/23/2023] [Indexed: 03/31/2023] Open
Abstract
Metallosis, defined as the presence of free metal particles in the tissue, including bone and soft tissue, is a rare phenomenon seen in orthopedic practice. It is more commonly seen in arthroplasty surgeries, but its occurrence in the presence of other metal implants is also well recognized. Multiple hypotheses are suggested to explain the genesis of metallosis, but it is traditionally believed that abnormal contact between the metal surfaces leads to abrasive wear causing the release of metal particles into the surrounding tissue eliciting foreign body reactions from the body's immune system. The consequences can be local effects, which can be asymptomatic soft tissue lesions, or lead to significant osteolysis, tissue necrosis, joint effusion, and large soft tissue masses, causing secondary pathological effects. The systemic distribution of these metal particles can also contribute to the clinical picture. The literature contains multiple case reports of metallosis following arthroplasty surgeries, but there is limited information on metallosis resulting from osteosynthesis of fractures. In this review, we are presenting our experience with a few patients who developed nonunion following the index surgeries and on revision were found to have metallosis as well. It is difficult to postulate whether metallosis was contributory to the nonunion or the other way around or whether the occurrence of nonunion in face of metallosis was a pure coincidence. Additionally, one of our patients had a positive intraoperative culture, further complicating the picture. In addition to the case series, we present a succinct review of the literature on metallosis found in previous studies.
Collapse
Affiliation(s)
- Muzaffar Mushtaq
- Orthopedics, Hamdard Institute of Medical Sciences and Research, Delhi, IND
| | - Owais A Qureshi
- Orthopedics, Hamdard Institute of Medical Sciences and Research, Delhi, IND
| | - Anmol Dua
- Orthopedics, Hamdard Institute of Medical Sciences and Research, Delhi, IND
| | - Sabina Khan
- Pathology, Hamdard Institute of Medical Sciences and Research, Delhi, IND
| | - Meesa Mehraj
- Pathology, Hamdard Institute of Medical Sciences and Research, Delhi, IND
| |
Collapse
|
23
|
Thomas M, Ślosarczyk A. Effect of Municipal Solid Waste Slag on the Durability of Cementitious Composites in Terms of Resistance to Freeze-Thaw Cycling. Materials (Basel) 2023; 16:626. [PMID: 36676364 PMCID: PMC9863835 DOI: 10.3390/ma16020626] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 11/15/2022] [Revised: 12/27/2022] [Accepted: 01/05/2023] [Indexed: 06/17/2023]
Abstract
The article presents durability results for cement mortars made with the addition of slag from municipal waste incineration plants as a replacement for natural aggregate. The undertaken durability tests included frost resistance tests and evaluation of strength, microstructure, water absorption and abrasiveness before and after 150 freeze-thaw cycles. The work reveals that MSWI slag in amounts up to 50 vol. % caused deterioration in the workability and water absorption of cement mortars, regardless of the type of cement used. This, in turn, resulted in a reduction in the compressive and flexural strengths of the composites compared to mortars made with sand alone. Nevertheless, the use of a higher grade of cement, CEM I 52.5 R, resulted in an increase in compressive strength and thus increased the mortars' frost and abrasion resistance. In addition, after the induced freeze-thaw cycles, mortars made with MSWI slag showed comparable or higher frost and abrasion resistance than those made using natural aggregate.
Collapse
|
24
|
Szafarczyk A, Toś C. The Use of Green Laser in LiDAR Bathymetry: State of the Art and Recent Advancements. Sensors (Basel) 2022; 23:s23010292. [PMID: 36616890 PMCID: PMC9824562 DOI: 10.3390/s23010292] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/08/2022] [Revised: 12/12/2022] [Accepted: 12/22/2022] [Indexed: 05/25/2023]
Abstract
Bathymetric LiDAR technology is a technology used for simultaneous data acquisition regarding the morphology of the bottom of water reservoirs and the surrounding coastal zone, realized from the air, e.g., by plane or drone. Contrary to the air topographic LiDAR, which uses an infrared wavelength of 1064 nm, bathymetric LiDAR systems additionally use a green wavelength of 532 nm. The green laser can penetrate the water, which makes it possible to measure the depth of shallow water reservoirs, rivers, and coastal sea waters within three Secchi depths. This article presents the theoretical basis for the construction of a green laser. Against the background of other methods of measuring the bottom of water reservoirs, the technology using waves from the visible light range is presented in detail in the assessment of the bottom morphology of shallow water reservoirs. The possibilities of using green laser in lidar bathymetry implemented in particular in non-navigable regions are shown. The results of the researchers' work on river processes (erosion, sedimentation), design of stream restoration, determination of morphometric parameters of the riverbed, as well as assessment of the topography of the marine coastal bottom zones are summarized. The development direction of lidar bathymetry is discussed.
Collapse
|
25
|
Cohen N, Radian A. Microplastic Textile Fibers Accumulate in Sand and Are Potential Sources of Micro(nano)plastic Pollution. Environ Sci Technol 2022; 56:17635-17642. [PMID: 36475681 DOI: 10.1021/acs.est.2c05026] [Citation(s) in RCA: 9] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/17/2023]
Abstract
Agricultural soils have been identified as sinks for microplastic fibers; however, little information is available on their long-term fate in these soils. In this study, polyester and nylon fibers were precisely cut to relevant environmental lengths, using novel methodology, and their behavior in sand columns was studied at environmental concentration. The longer fibers (>50 μm) accumulated in the upper layers of the sand, smaller fibers were slightly more mobile, and nylon showed marginally higher mobility than polyester. Previous studies have overlooked changes in microplastic morphology due to transport in soil. Our study is the first to show that fibers exhibited breakage, peeling, and thinning under flow conditions in soil, releasing smaller, more mobile fragments. Furthermore, the peelings exhibited different adsorption properties compared to the core fiber. This suggests that microplastic fibers can become a source of smaller micro(nano)plastics and potential vectors for certain molecules, risking continuous contamination of nearby soils, surfaces, and groundwater.
Collapse
Affiliation(s)
- Nirrit Cohen
- Faculty of Civil and Environmental Engineering, Technion - Israel Institute of Technology, Technion City, Haifa 32000, Israel
| | - Adi Radian
- Faculty of Civil and Environmental Engineering, Technion - Israel Institute of Technology, Technion City, Haifa 32000, Israel
| |
Collapse
|
26
|
Tomás DBM, Pecci-Lloret MP, Guerrero-Gironés J. EFFECTIVENESS AND ABRASIVENESS OF ACTIVATED CHARCOAL AS A WHITENING AGENT: A SYSTEMATIC REVIEW OF IN VITRO STUDIES. Ann Anat 2022; 245:151998. [PMID: 36183933 DOI: 10.1016/j.aanat.2022.151998] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/20/2022] [Revised: 08/29/2022] [Accepted: 09/19/2022] [Indexed: 11/25/2022]
Abstract
INTRODUCTION Tooth whitening is currently one of the most requested treatments to change the color of teeth. There are different types of whitening in the dental office and at home. There are also many whitening agents on the market. Nowadays, the public has shown great interest in a new natural compound: activated charcoal. It has an abrasive effect and it is included in toothpastes to whiten teeth quickly and easily. OBJECTIVES The main objective of the systematic review is to perform a qualitative synthesis of the available literature on the use of activated charcoal-based toothpaste for tooth whitening. MATERIAL AND METHODS An electronic search was carried out in PubMed, Web of Science, and Scopus databases. The search included the terms (charcoal-based OR activated charcoal OR charcoal OR soot) AND (toothpaste OR dentifrices OR bleaching OR oral hygiene OR enamel OR teeth). Inclusion criteria were articles that were published in English, that included activated charcoal toothpastes, that assessed the efficacy of activated charcoal bleaching and/or the safety of using activated charcoal toothpastes, that were conducted on humans or extracted teeth regardless of their origin and the year of publication. RESULTS Out of 208 articles, 11 met the inclusion criteria, the Risk of Bias of the selected studies was determined as medium-high. Regarding the whitening effect, there is a variety of results depending on the study: in some there are no significant differences between the proposed treatments and in others activated charcoal is not the most whitening agent. Regarding the abrasive effect, most studies agree that activated charcoal toothpaste has a higher abrasive potential. CONCLUSION Toothpastes based on activated charcoal possess a lower whitening effect than other alternatives and can be considered as less safe due to its high abrasive potential.
Collapse
Affiliation(s)
- Dolores Bibiana Montero Tomás
- Gerodontology and Special Care Dentistry Unit, Morales Meseguer Hospital, Faculty of Medicine, IMIB-Arrixaca, University of Murcia, 30008 Murcia, Spain
| | - María Pilar Pecci-Lloret
- Gerodontology and Special Care Dentistry Unit, Morales Meseguer Hospital, Faculty of Medicine, IMIB-Arrixaca, University of Murcia, 30008 Murcia, Spain.
| | - Julia Guerrero-Gironés
- Gerodontology and Special Care Dentistry Unit, Morales Meseguer Hospital, Faculty of Medicine, IMIB-Arrixaca, University of Murcia, 30008 Murcia, Spain
| |
Collapse
|
27
|
Kanaan M, Brabant A, Eckert GJ, Hara AT, Carvalho JC. Tooth Wear and Oral-Health-Related Quality of Life in Dentate Adults. J Dent 2022; 125:104269. [PMID: 35998742 DOI: 10.1016/j.jdent.2022.104269] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/11/2022] [Revised: 07/20/2022] [Accepted: 08/19/2022] [Indexed: 11/17/2022] Open
Abstract
OBJECTIVES This study estimated the extent to which tooth wear, adjusted for (oral) health risk indicators, impacts adversely on the Oral-Health-Related Quality of Life (OHRQoL) of dentate adults. METHODS A cross-sectional study was conducted and had a convenience sample of 570 adults ≥18 years old with at least one bilateral molar occlusal contact. Participants answered a self-applied questionnaire (ICC=0.71) consisting of four domains: socio-demographics, oral care attendance, (oral) health conditions and lifestyle, complaints and oral-health-related quality of life (OHIP-14). Tooth wear was clinically assessed using the Basic Erosive Wear Examination index by two examiners, whose inter-examiner reliability were k=0.76-0.80. RESULTS The outcome was a high score on the OHRQoL (median split ≥ 7). The prevalence of tooth wear was 75.0%. Only 30.2% of adults reported impacts on at least 1 performance parameter affected 'fairly often' or 'very often'. The hierarchical logistic regression showed that participants 35-54 years old (OR=2.1), who were ever prevented from regular oral health care due to costs of care (OR=3.6), who ingested acidic beverages ≥ daily (OR=1.7), who had tooth sensitivity (OR= 2.9) and those having the impression that their teeth have changed appearance (OR= 5.9) were significantly more likely to report lower OHRQoL than their counterparts. The severity of tooth wear was not significant when considering moderate and severe cases together. CONCLUSIONS Although the prevalence of tooth wear was high, its severity and impact on OHRQoL were limited. However, distal and proximal indicators for tooth wear were mediators for impaired OHRQoL and treatment needs. CLINICAL SIGNIFICANCE Prevalence and severity of tooth wear had limited impact on OHRQoL in adults. Distal and proximal indicators for tooth wear were mediators for impaired OHRQoL. The understanding of these relationships offers an opportunity to assess in depth the treatment needs and quality of life of patients affected by tooth wear.
Collapse
Affiliation(s)
- Mireille Kanaan
- Faculty of Medicine and Dentistry, UCLouvain, Brussels, Belgium
| | - Alain Brabant
- Faculty of Medicine and Dentistry, UCLouvain, Brussels, Belgium
| | - George Joseph Eckert
- Department of Biostatistics and Health Data Science, Indiana University School of Medicine, Indianapolis, United States of America
| | - Anderson Takeo Hara
- Department of Cariology, Operative Dentistry and Dental Public Health, Indiana University School of Dentistry, Indianapolis, United States of America
| | | |
Collapse
|
28
|
Nam J, Nguyen DH, Lee S, Heo SM, Park J. Simulation of Non-Carious Cervical Lesions by Computational Toothbrush Model: A Novel Three-Dimensional Discrete Element Method. Sensors (Basel) 2022; 22:s22114183. [PMID: 35684809 PMCID: PMC9185324 DOI: 10.3390/s22114183] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/01/2022] [Revised: 05/28/2022] [Accepted: 05/28/2022] [Indexed: 06/01/2023]
Abstract
Non-carious cervical lesions (NCCLs) are saucer-shaped abrasions of a tooth. NCCLs can form due to various etiologies, including toothbrushing wear, acid erosion, and mechanical stress. Owing to this complex interplay, the mechanism of NCCLs in tooth abrasion has not been established. This study aims to develop a numerical method using a computational toothbrush to simulate NCCLs. The forces acting on the teeth and the amount of abrasion generated were evaluated. The discrete element method using in-house code, connected particle model, and Archard wear model were applied for brushing. In the toothbrush model, 42 acrylic tufts were fixed into a toothbrush head. The teeth models with enamel properties comprised four flat plates and two grooves to simulate the anterior teeth and NCCLs. The brushing speed and depth for one cycle were established as simulation parameters. The force applied within the ununiform plane was concentrated on several bristles as the toothbrush passed through the interproximal space. The brushing force (depth) had a greater effect on tooth abrasion than the brushing speed. Toothbrushing abrasion was mainly concentrated in the interproximal space. Therefore, forceful tooth brushing can cause NCCLs from the interproximal space to the cervical area of the tooth.
Collapse
Affiliation(s)
- Jinsu Nam
- Department of Mechanical Design Engineering, Kumoh National Institute of Technology, 61, Daehak-Ro, Gumi 39177, Gyeungbuk, Korea; (J.N.); (S.L.)
| | - Duong Hong Nguyen
- Techno Vietnam Co., JSC., TSQ Living Area (Euroland), Mo Lao Ward, Ha Dong District, Hanoi City 12110, Vietnam;
| | - Seungjun Lee
- Department of Mechanical Design Engineering, Kumoh National Institute of Technology, 61, Daehak-Ro, Gumi 39177, Gyeungbuk, Korea; (J.N.); (S.L.)
- Department of Aeronautic, Mechanical and Electrical Convergence Engineering, Kumoh National Institute of Technology, 61, Daehak-Ro, Gumi 39177, Gyeungbuk, Korea
| | - Seok-Mo Heo
- Department of Periodontology, School of Dentistry, Jeonbuk National University, Jeonju 54907, Jeonbuk, Korea
| | - Junyoung Park
- Department of Mechanical Design Engineering, Kumoh National Institute of Technology, 61, Daehak-Ro, Gumi 39177, Gyeungbuk, Korea; (J.N.); (S.L.)
- Department of Aeronautic, Mechanical and Electrical Convergence Engineering, Kumoh National Institute of Technology, 61, Daehak-Ro, Gumi 39177, Gyeungbuk, Korea
| |
Collapse
|
29
|
Couzon N, Ferreira M, Duval S, El-Achari A, Campagne C, Loiseau T, Volkringer C. Microwave-Assisted Synthesis of Porous Composites MOF-Textile for the Protection against Chemical and Nuclear Hazards. ACS Appl Mater Interfaces 2022; 14:21497-21508. [PMID: 35471817 DOI: 10.1021/acsami.2c03247] [Citation(s) in RCA: 12] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
Since the emergence of chemical, biological, radiological, and nuclear risks, significant efforts have been made to create efficient personal protection equipment. Recently, metal-organic framework (MOF) materials have emerged as new promising candidates for the capture and degradation of various threats, like chemical warfare agents (CWAs) or radioactive species. Herein, we report a new synthesis method of MOF-textile composites by microwave irradiation, with direct anchoring of MOFs on textiles. The resistance of the composite has been tested using normed abrasion measurements, and non-stable samples were optimized. The protection capacity of the MOF-textile composite has been tested against dimethyl 4-nitrophenyl phosphate, a common CWA simulant, showing short degradation half-life (30 min). Radiological/nuclear protection has also been tested through uranium uptake (up to 15 mg g-1 adsorbent) and the capture of Kr or Xe gas at 0.9 and 2.9 cm3/g, respectively.
Collapse
Affiliation(s)
- Nelly Couzon
- Univ. Lille, CNRS, Centrale Lille, UMR 8181─UCCS─Unité de Catalyse et Chimie du Solide, Lille F-59000, France
| | - Manuela Ferreira
- Univ. Lille, ENSAIT, ULR 2461─GEMTEX─Génie et Matériaux Textiles, Lille F-59000, France
| | - Sylvain Duval
- Univ. Lille, CNRS, Centrale Lille, UMR 8181─UCCS─Unité de Catalyse et Chimie du Solide, Lille F-59000, France
| | - Ahmida El-Achari
- Univ. Lille, ENSAIT, ULR 2461─GEMTEX─Génie et Matériaux Textiles, Lille F-59000, France
| | - Christine Campagne
- Univ. Lille, ENSAIT, ULR 2461─GEMTEX─Génie et Matériaux Textiles, Lille F-59000, France
| | - Thierry Loiseau
- Univ. Lille, CNRS, Centrale Lille, UMR 8181─UCCS─Unité de Catalyse et Chimie du Solide, Lille F-59000, France
| | - Christophe Volkringer
- Univ. Lille, CNRS, Centrale Lille, UMR 8181─UCCS─Unité de Catalyse et Chimie du Solide, Lille F-59000, France
| |
Collapse
|
30
|
Abstract
Geopolymer concrete is produced from the geopolymerization process, in which molecules known as oligomers integrate to form geopolymer networks with covalent bonding. Its production expends less thermal energy and results in a smaller carbon footprint compared to Ordinary Portland Cement (OPC) concrete. It requires only an alkaline activator to catalyze its aluminosilicate sources such as metakaolin and fly ash, to yield geopolymer binder for the geopolymerization to take place. Because of its eco-friendly technology and practical application, current research interest is mainly concentrated on the endurance of geopolymer concrete to resist heat and chemical aggressions. As such, it is pertinent for this review article to provide critical insight into the recent progress in research on the durability of geopolymer concrete. One significant outcome of the review is that the admixture of geopolymer concrete could be blended with additives such as micro-silica and fibers such as polypropylene fibers, to enhance its durability. The review on the durability aspects of geopolymer concrete showed that it had high compressive strength at an optimal elevated temperature, low to medium chloride ion penetrability, and high resistance to acid attack and abrasion. This makes geopolymer concrete a viable candidate to replace OPC concrete in the construction industry.
Collapse
|
31
|
Jazdarehee A, Huget-Penner S, Pawlowska M. Pseudo-pheochromocytoma due to obstructive sleep apnea: a case report. Endocrinol Diabetes Metab Case Rep 2022; 2022:21-0100. [PMID: 35212265 PMCID: PMC8897593 DOI: 10.1530/edm-21-0100] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/17/2021] [Accepted: 02/02/2022] [Indexed: 11/11/2022] Open
Abstract
SUMMARY Obstructive sleep apnea (OSA) is a condition of intermittent nocturnal upper airway obstruction. OSA increases sympathetic drive which may result in clinical and biochemical features suggestive of pheochromocytoma. We present the case of a 65-year-old male with a 2.9-cm left adrenal incidentaloma on CT, hypertension, symptoms of headache, anxiety and diaphoresis, and persistently elevated 24-h urine norepinephrine (initially 818 nmol/day (89-470)) and normetanephrine (initially 11.2 µmol/day (0.6-2.7)). He was started on prazosin and underwent left adrenalectomy. Pathology revealed an adrenal corticoadenoma with no evidence of pheochromocytoma. Over the next 2 years, urine norepinephrine and normetanephrine remained significantly elevated with no MIBG avid disease. Years later, he was diagnosed with severe OSA and treated with continuous positive airway pressure. Urine testing done once OSA was well controlled revealed complete normalization of urine norepinephrine and normetanephrine with substantial symptom improvement. It was concluded that the patient never had a pheochromocytoma but rather an adrenal adenoma with biochemistry and symptoms suggestive of pheochromocytoma due to untreated severe OSA. Pseudo-pheochromocytoma is a rare presentation of OSA and should be considered on the differential of elevated urine catecholamines and metanephrines in the right clinical setting. LEARNING POINTS Obstructive sleep apnea (OSA) is a common condition among adults. OSA may rarely present as pseudo-pheochromocytoma with symptoms of pallor, palpitations, perspiration, headache, or anxiety. OSA should be considered on the differential of elevated urine catecholamines and metanephrines, especially in patients with negative metaiodobenzylguanidine (MIBG) scan results.
Collapse
Key Words
- adolescent/young adult
- adult
- geriatric
- neonatal
- paediatric
- pregnant adult
- female
- male
- american indian or alaska native
- asian - bangladeshi
- asian - chinese
- asian - filipino
- asian - indian
- asian - japanese
- asian - korean
- asian - pakistani
- asian - vietnamese
- asian - other
- black - african
- black - caribbean
- black - other
- hispanic or latino - central american or south american
- hispanic or latino - cuban
- hispanic or latino - dominican
- hispanic or latino - mexican, mexican american, chicano
- hispanic or latino - puerto rican
- hispanic or latino - other
- native hawaiian/other pacific islander
- white
- other
- afghanistan
- aland islands
- albania
- algeria
- american samoa
- andorra
- angola
- anguilla
- antarctica
- antigua and barbuda
- argentina
- armenia
- aruba
- australia
- austria
- azerbaijan
- bahamas
- bahrain
- bangladesh
- barbados
- belarus
- belgium
- belize
- benin
- bermuda
- bhutan
- bolivia
- bosnia and herzegovina
- botswana
- bouvet island
- brazil
- british indian ocean territory
- brunei darussalam
- bulgaria
- burkina faso
- burundi
- cambodia
- cameroon
- canada
- cape verde
- cayman islands
- central african republic
- chad
- chile
- china
- christmas island
- cocos (keeling) islands
- colombia
- comoros
- congo
- congo, the democratic republic of the
- cook islands
- costa rica
- côte d'ivoire
- croatia
- cuba
- cyprus
- czech republic
- denmark
- djibouti
- dominica
- dominican republic
- ecuador
- egypt
- el salvador
- equatorial guinea
- eritrea
- estonia
- ethiopia
- falkland islands (malvinas)
- faroe islands
- fiji
- finland
- france
- french guiana
- french polynesia
- french southern territories
- gabon
- gambia
- georgia
- germany
- ghana
- gibraltar
- greece
- greenland
- grenada
- guadeloupe
- guam
- guatemala
- guernsey
- guinea
- guinea-bissau
- guyana
- haiti
- heard island and mcdonald islands
- holy see (vatican city state)
- honduras
- hong kong
- hungary
- iceland
- india
- indonesia
- iran, islamic republic of
- iraq
- ireland
- isle of man
- israel
- italy
- jamaica
- japan
- jersey
- jordan
- kazakhstan
- kenya
- kiribati
- korea, democratic people's republic of
- korea, republic of
- kuwait
- kyrgyzstan
- lao people's democratic republic
- latvia
- lebanon
- lesotho
- liberia
- libyan arab jamahiriya
- liechtenstein
- lithuania
- luxembourg
- macao
- macedonia, the former yugoslav republic of
- madagascar
- malawi
- malaysia
- maldives
- mali
- malta
- marshall islands
- martinique
- mauritania
- mauritius
- mayotte
- mexico
- micronesia, federated states of
- moldova, republic of
- monaco
- mongolia
- montenegro
- montserrat
- morocco
- mozambique
- myanmar
- namibia
- nauru
- nepal
- netherlands
- netherlands antilles
- new caledonia
- new zealand
- nicaragua
- niger
- nigeria
- niue
- norfolk island
- northern mariana islands
- norway
- oman
- pakistan
- palau
- palestinian territory, occupied
- panama
- papua new guinea
- paraguay
- peru
- philippines
- pitcairn
- poland
- portugal
- puerto rico
- qatar
- réunion
- romania
- russian federation
- rwanda
- saint barthélemy
- saint helena
- saint kitts and nevis
- saint lucia
- saint martin
- saint pierre and miquelon
- saint vincent and the grenadines
- samoa
- san marino
- sao tome and principe
- saudi arabia
- senegal
- serbia
- seychelles
- sierra leone
- singapore
- slovakia
- slovenia
- solomon islands
- somalia
- south africa
- south georgia and the south sandwich islands
- spain
- sri lanka
- sudan
- suriname
- svalbard and jan mayen
- swaziland
- sweden
- switzerland
- syrian arab republic
- taiwan, province of china
- tajikistan
- tanzania, united republic of
- thailand
- timor-leste
- togo
- tokelau
- tonga
- trinidad and tobago
- tunisia
- turkey
- turkmenistan
- turks and caicos islands
- tuvalu
- uganda
- ukraine
- united arab emirates
- united kingdom
- united states
- united states minor outlying islands
- uruguay
- uzbekistan
- vanuatu
- vatican city state
- venezuela
- viet nam
- virgin islands, british
- virgin islands, u.s.
- wallis and futuna
- western sahara
- yemen
- zambia
- zimbabwe
- maylaysia
- adipose tissue
- adrenal
- bone
- duodenum
- heart
- hypothalamus
- kidney
- liver
- ovaries
- pancreas
- parathyroid
- pineal
- pituitary
- placenta
- skin
- stomach
- testes
- thymus
- thyroid
- andrology
- autoimmunity
- cardiovascular endocrinology
- developmental endocrinology
- diabetes
- emergency
- endocrine disruptors
- endocrine-related cancer
- epigenetics
- genetics and mutation
- growth factors
- gynaecological endocrinology
- immunology
- infectious diseases
- late effects of cancer therapy
- mineral
- neuroendocrinology
- obesity
- ophthalmology
- paediatric endocrinology
- puberty
- tumours and neoplasia
- vitamin d
- 17ohp
- acth
- adiponectin
- adrenaline
- aldosterone
- amh
- androgens
- androstenedione
- androsterone
- angiotensin
- antidiuretic hormone
- atrial natriuretic hormone
- avp
- beta-endorphin
- big igf2
- brain natriuretic peptide
- calcitonin
- calcitriol
- cck
- corticosterone
- corticotrophin
- cortisol
- cortisone
- crh
- dehydroepiandrostenedione
- deoxycorticosterone
- deoxycortisol
- dhea
- dihydrotestosterone
- dopamine
- endothelin
- enkephalin
- epitestosterone
- epo
- fgf23
- fsh
- gastrin
- gh
- ghrelin
- ghrh
- gip
- glp1
- glp2
- glucagon
- glucocorticoids
- gnrh
- gonadotropins
- hcg
- hepcidin
- histamine
- human placental lactogen
- hydroxypregnenolone
- igf1
- igf2
- inhibin
- insulin
- kisspeptin
- leptin
- lh
- melanocyte-stimulating hormone
- melatonin
- metanephrines
- mineralocorticoids
- motilin
- nandrolone
- neuropeptide y
- noradrenaline
- normetanephrine
- oestetrol (e4)
- oestradiol (e2)
- oestriol (e3)
- oestrogens
- oestrone (e1)
- osteocalcin
- oxyntomodulin
- oxytocin
- pancreatic polypeptide
- peptide yy
- pregnenolone
- procalcitonin
- progesterone
- prolactin
- prostaglandins
- pth
- relaxin
- renin
- resistin
- secretin
- somatostatin
- testosterone
- thpo
- thymosin
- thymulin
- thyroxine (t4)
- trh
- triiodothyronine (t3)
- tsh
- vip
- 17-alpha hydroxylase/17,20 lyase deficiency
- 17-beta-hydroxysteroid dehydrogenase type 3 deficiency
- 3-m syndrome
- 22q11 deletion syndrome
- 49xxxxy syndrome
- abscess
- acanthosis nigricans
- acromegaly
- acute adrenocortical insufficiency
- addisonian crisis
- addison's disease
- adenocarcinoma
- aip gene mutation
- adrenal insufficiency
- adrenal salt-wasting crisis
- adrenarche
- adrenocortical adenoma
- adrenocortical carcinoma
- adrenoleukodystrophy
- aip gene variant
- amenorrhoea (primary)
- amenorrhoea (secondary)
- amyloid goitre
- amyloidosis
- anaplastic thyroid cancer
- anaemia
- aneuploidy
- androgen insensitivity syndrome
- anti-phospholipid antibody syndrome
- asthma
- autoimmune disorders
- autoimmune polyendocrine syndrome 1
- autoimmune polyendocrine syndrome 2
- autoimmune polyglandular syndrome
- autoimmune hypophysitis
- autosomal dominant hypophosphataemic rickets
- autosomal dominant osteopetrosis
- bardet-biedl syndrome
- bartter syndrome
- bilateral adrenal hyperplasia
- biliary calculi
- breast cancer
- brenner tumour
- brown tumour
- burkitt's lymphoma
- casr gene mutation
- catecholamine secreting carotid body paraganglionoma
- cancer-prone syndrome
- carcinoid syndrome
- carcinoid tumour
- carney complex
- carotid body paraganglioma
- c-cell hyperplasia
- cerebrospinal fluid leakage
- chronic fatigue syndrome
- circadian rhythm sleep disorders
- congenital adrenal hyperplasia
- congenital hypothyroidism
- congenital hyperinsulinism
- conn's syndrome
- corticotrophic adenoma
- craniopharyngioma
- cretinism
- crohn's disease
- cryptorchidism
- cushing's disease
- cushing's syndrome
- cystolithiasis
- de quervain's thyroiditis
- denys-drash syndrome
- desynchronosis
- developmental abnormalities
- diabetes - lipoatrophic
- diabetes - mitochondrial
- diabetes - steroid-induced
- diabetes insipidus - dipsogenic
- diabetes insipidus - gestational
- diabetes insipidus - nephrogenic
- diabetes insipidus - neurogenic/central
- diabetes mellitus type 1
- diabetes mellitus type 2
- diabetic foot syndrome
- diabetic hypoglycaemia
- diabetic ketoacidosis
- diabetic muscle infarction
- diabetic nephropathy
- diverticular disease
- donohue syndrome
- down syndrome
- eating disorders
- ectopic acth syndrome
- ectopic cushing's syndrome
- ectopic parathyroid adenoma
- empty sella syndrome
- endometrial cancer
- endometriosis
- eosinophilic myositis
- euthyroid sick syndrome
- familial hypocalciuric hypercalcaemia
- familial dysalbuminaemic hyperthyroxinaemia
- familial euthyroid hyperthyroxinaemia
- fat necrosis
- female athlete triad syndrome
- fetal demise
- fetal macrosomia
- follicular thyroid cancer
- fractures
- frasier syndrome
- friedreich's ataxia
- functional parathyroid cyst
- galactorrhoea
- gastrinoma
- gastritis
- gastrointestinal perforation
- gastrointestinal stromal tumour
- gck mutation
- gender identity disorder
- gestational diabetes mellitus
- giant ovarian cysts
- gigantism
- gitelman syndrome
- glucagonoma
- glucocorticoid remediable aldosteronism
- glycogen storage disease
- goitre
- goitre (multinodular)
- gonadal dysgenesis
- gonadoblastoma
- gonadotrophic adenoma
- gorham's disease
- granuloma
- granulosa cell tumour
- graves' disease
- graves' ophthalmopathy
- growth hormone deficiency (adult)
- growth hormone deficiency (childhood onset)
- gynaecomastia
- hamman's syndrome
- haemorrhage
- hajdu-cheney syndrome
- hashimoto's disease
- hemihypertrophy
- hepatitis c
- hereditary multiple osteochondroma
- hirsutism
- histiocytosis
- huntington's disease
- hürthle cell adenoma
- hyperaldosteronism
- hyperandrogenism
- hypercalcaemia
- hypercalcaemic crisis
- hyperglucogonaemia
- hyperglycaemia
- hypergonadotropic hypogonadism
- hypergonadotropism
- hyperinsulinaemia
- hyperinsulinaemic hypoglycaemia
- hyperkalaemia
- hyperlipidaemia
- hypernatraemia
- hyperosmolar hyperglycaemic state
- hyperparathyroidism (primary)
- hyperparathyroidism (secondary)
- hyperparathyroidism (tertiary)
- hyperpituitarism
- hyperprolactinaemia
- hypersexuality
- hypertension
- hyperthyroidism
- hypoaldosteronism
- hypocalcaemia
- hypoestrogenism
- hypoglycaemia
- hypoglycaemic coma
- hypogonadism
- hypogonadotrophic hypogonadism
- hypoinsulinaemia
- hypokalaemia
- hyponatraemia
- hypoparathyroidism
- hypophosphataemia
- hypophosphatasia
- hypophysitis
- hypopituitarism
- hypothyroidism
- iatrogenic disorder
- idiopathic bilateral adrenal hyperplasia
- idiopathic pituitary hyperplasia
- igg4-related systemic disease
- inappropriate tsh secretion
- incidentaloma
- infertility
- insulin autoimmune syndrome
- insulin resistance
- insulinoma
- intracranial vasospasm
- intrauterine growth retardation
- iodine allergy
- ischaemic heart disease
- kallmann syndrome
- ketoacidosis
- klinefelter syndrome
- kwashiorkor
- kwashiorkor (marasmic)
- leg ulcer
- laron syndrome
- latent autoimmune diabetes of adults (lada)
- laurence-moon syndrome
- left ventricular hypertrophy
- leukocytoclastic vasculitis
- leydig cell tumour
- lipodystrophy
- lipomatosis
- liver failure
- lung metastases
- luteoma
- lymphadenopathy
- macronodular adrenal hyperplasia
- macronodular hyperplasia
- macroprolactinoma
- marasmus
- maturity onset diabetes of young (mody)
- mccune-albright syndrome
- mckittrick-wheelock syndrome
- medullary thyroid cancer
- meigs syndrome
- membranous nephropathy
- men1
- men2a
- men2b
- men4
- menarche
- meningitis
- menopause
- metabolic acidosis
- metabolic syndrome
- metastatic carcinoma
- metastatic chromaffin cell tumour
- metastatic gastrinoma
- metastatic melanoma
- metastatic tumour
- microadenoma
- microprolactinoma
- motor neurone disease
- myasthenia gravis
- myelolipoma
- myocardial infarction
- myositis
- myotonic dystrophy type 1
- myotonic dystrophy type 2
- myxoedema
- myxoedema coma
- nelson's syndrome
- neonatal diabetes
- nephrolithiasis
- neuroblastoma
- neuroendocrine tumour
- neurofibromatosis
- nodular hyperplasia
- non-functioning pituitary adenoma
- non-hodgkin lymphoma
- non-islet-cell tumour hypoglycaemia
- noonan syndrome
- oculocerebrorenal syndrome
- osteogenesis imperfecta
- osteomalacia
- osteomyelitis
- osteoporosis
- osteoporosis (pregnancy/lactation-associated)
- osteosclerosis
- ovarian cancer
- ovarian dysgenesis
- ovarian hyperstimulation syndrome
- ovarian tumour
- paget's disease
- paget's disease (juvenille)
- pancreatic neuroendocrine tumour
- pancreatitis
- panhypopituitarism
- papillary thyroid cancer
- paraganglioma
- paranasal sinus lesion
- paraneoplastic syndromes
- parasitic thyroid nodules
- parathyroid adenoma
- parathyroid adenoma (ectopic)
- parathyroid carcinoma
- parathyroid cyst
- parathroid hyperplasia
- pcos
- periodontal disease
- phaeochromocytoma
- phaeochromocytoma crisis
- pickardt syndrome
- pituitary abscess
- pituitary adenoma
- pituitary apoplexy
- pituitary carcinoma
- pituitary cyst
- pituitary haemorrhage
- pituitary hyperplasia
- pituitary hypoplasia
- pituitary tumour (malignant)
- plurihormonal pituitary adenoma
- poems syndrome
- polycythaemia
- porphyria
- pneumonia
- posterior reversible encephalopathy syndrome
- post-prandial hypoglycaemia
- prader-willi syndrome
- prediabetes
- pre-eclampsia
- pregnancy
- premature ovarian failure
- premenstrual dysphoric disorder
- premenstrual syndrome
- primary hypertrophic osteoarthropathy
- prolactinoma
- prostate cancer
- pseudohypoaldosteronism type 1
- pseudohypoaldosteronism type 2
- pseudohypoparathyroidism
- psychosocial short stature
- puberty (delayed or absent)
- puberty (precocious)
- pulmonary oedema
- quadrantanopia
- rabson-mendenhall syndrome
- rhabdomyolysis
- rheumatoid arthritis
- rickets
- schwannoma
- sellar reossification
- sertoli cell tumour
- sertoli-leydig cell tumour
- sexual development disorders
- sheehan's syndrome
- short stature
- siadh
- small-cell carcinoma
- small intestine neuroendocrine tumour
- solitary fibrous tumour
- solitary sellar plasmacytoma
- somatostatinoma
- somatotrophic adenoma
- squamous cell thyroid carcinoma
- stiff person syndrome
- struma ovarii
- subcutaneous insulin resistance
- systemic lupus erythematosus
- takotsubo cardiomyopathy
- tarts
- testicular cancer
- thecoma
- thyroid adenoma
- thyroid carcinoma
- thyroid cyst
- thyroid dysgenesis
- thyroid fibromatosis
- thyroid hormone resistance syndrome
- thyroid lymphoma
- thyroid nodule
- thyroid storm
- thyroiditis
- thyrotoxicosis
- thyrotrophic adenoma
- traumatic brain injury
- tuberculosis
- tuberous sclerosis complex
- tumour-induced osteomalacia
- turner syndrome
- unilateral adrenal hyperplasia
- ureterolithiasis
- urolithiasis
- von hippel-lindau disease
- wagr syndrome
- waterhouse-friderichsen syndrome
- williams syndrome
- wolcott-rallison syndrome
- wolfram syndrome
- xanthogranulomatous hypophysitis
- xlaad/ipex
- zollinger-ellison syndrome
- abdominal adiposity
- abdominal distension
- abdominal cramp
- abdominal discomfort
- abdominal guarding
- abdominal lump
- abdominal pain
- abdominal tenderness
- abnormal posture
- abdominal wall defects
- abrasion
- acalculia
- accelerated growth
- acne
- acrochorda
- acroosteolysis
- acute stress reaction
- adverse breast development
- aggression
- agitation
- agnosia
- akathisia
- akinesia
- albuminuria
- alcohol intolerance
- alexia
- alopecia
- altered level of consciousness
- amaurosis
- amaurosis fugax
- ambiguous genitalia
- amblyopia
- amenorrhoea
- ameurosis
- amnesia
- amusia
- anasarca
- angiomyxoma
- anhedonia
- anisocoria
- ankle swelling
- anorchia
- anorectal malformations
- anorexia
- anosmia
- anosognosia
- anovulation
- antepartum haemorrhage
- anuria
- anxiety
- apathy
- aphasia
- aphonia
- apnoea
- appendicitis
- appetite increase
- appetite reduction/loss
- apraxia
- aqueductal stenosis
- arteriosclerosis
- arthralgia
- articulation impairment
- ascites
- asperger syndrome
- asphyxia
- asthenia
- astigmatism
- asymptomatic
- ataxia
- atrial fibrillation
- atrial myxoma
- atrophy
- adhd
- autism
- autonomic neuropathy
- avulsion
- babinski's sign
- back pain
- bacteraemia
- behavioural problems
- belching
- bifid scrotum
- biliary colic
- bitemporal hemianopsia
- blindness
- blistering
- bloating
- bloody show
- boil(s)
- bone cyst
- bone fracture(s)
- bone lesions
- bone pain
- bony metastases
- borborygmus
- bowel movements - bleeding
- bowel movements - increased frequency
- bowel movements - pain
- bowel obstruction
- bowel perforation
- brachycephaly
- brachydactyly
- bradycardia
- bradykinesia
- bradyphrenia
- bradypnea
- breast contour change
- breast enlargement
- breast lump
- breast reduction
- breast tenderness
- breastfeeding difficulties
- breathing difficulties
- bronchospasms
- brushfield spots
- bruxism
- buffalo hump
- cachexia
- calcification
- cardiac fibrosis
- cardiac malformations
- cardiac tamponade
- cardiogenic shock
- cardiomegaly
- cardiomyopathy
- cardiopulmonary arrest
- carpal tunnel syndrome
- caruncle - inflammation
- cataplexy
- cataract(s)
- catathrenia
- central obesity
- cerebrospinal fluid rhinorrhoea
- cervical pain
- cheeks - full
- cheiloschisis
- chemosis
- chest pain
- chest pain (pleuritic)
- chest pain (precordial)
- cheyne-stokes respiration
- chills
- cholecystitis
- cholestasis
- chondrocalcinosis
- chordee
- chorea
- choroidal atrophy
- chronic pain
- circulatory collapse
- cirrhosis
- citraturia
- claudication
- clitoromegaly
- cloacal exstrophy
- clonus
- club foot
- clumsiness
- coagulopathy
- coarctation
- coeliac disease
- cognitive problems
- cold intolerance
- collapse
- colour blindness
- coma
- concentration difficulties
- confusion
- congenital heart defect
- conjunctivitis
- constipation
- convulsions
- coordination difficulties
- coughing
- crackles
- cramps
- craniofacial abnormalities
- craniotabes
- cutaneous ischaemia
- cutaneous myxoma
- cutaneous pigmentation
- cyanosis
- dalrymple's sign
- deafness
- deep vein thrombosis
- dehydration
- delayed puberty
- delirium
- dementia
- dental abscess(es)
- dental problems
- depression
- diabetes insipidus
- diabetic neuropathy
- diabetic foot infection
- diabetic foot neuropathy
- diabetic foot ulceration
- diarrhoea
- diplopia
- dizziness
- duodenal atresia
- duplex kidney(s)
- dysarthria
- dysdiadochokinesia
- dysgraphia
- dyslexia
- dyslipidaemia
- dysmenorrhoea
- dyspareunia
- dyspepsia
- dysphagia
- dysphonia
- dysphoria
- dyspnoea
- dystonia
- dysuria
- ear, nose and/or throat infection
- early menarche
- ears - low set
- ears - pinna abnormalities
- ears - small
- ecchymoses
- ectopic ureter
- emotional immaturity
- encopresis
- endometrial hyperplasia
- enlarged bladder
- enlarged prostate
- eosinophilia
- epicanthic fold
- epilepsy
- epistaxis
- erectile dysfunction
- erythema
- euphoria
- eyebrows - bushy
- eyelid retraction
- eyelid swelling
- eyelids - redness
- eyes - almond-shaped
- eyes - dry
- eyes - feeling of grittiness
- eyes - inflammation
- eyes - irritation
- eyes - itching
- eyes - pain (gazing down)
- eyes - pain (gazing up)
- eyes - redness
- eyes - watering
- face - change in appearance
- face - coarse features
- face - numbness
- facial fullness
- facial palsy
- facial plethora
- facial weakness
- facies - abnormal
- facies - hippocratic
- facies - moon
- faecal incontinence
- failure to thrive
- fallopian tube hyperplasia
- fasciculation
- fatigue
- fatigue (post-exertional)
- feet - cold
- feet - increased size
- feet - large
- feet - pain
- feet - small
- fingers - thick
- flaccid paralysis
- flatulence
- flushing
- fontanelles - enlarged
- frontal bossing
- fungating lesion
- fungating mass
- funny turns
- gait abnormality
- gait unsteadiness
- gallbladder calculi
- gallstones
- gangrene
- gastro-oesophageal reflux
- genital oedema
- genu valgum
- genu varum
- gestational diabetes
- glaucoma
- glucose intolerance
- glucosuria
- growth hormone deficiency
- growth retardation
- haematemesis
- haematochezia
- haematoma
- haematuria
- haemoglobinuria
- haemoptysis
- hair - coarse
- hair - dry
- hair - temporal balding
- hairline - low
- hallucination
- hands - enlargement
- hands - large
- hands - single palmar crease
- hands - small
- head - large
- headache
- hearing loss
- heart failure
- heart murmur
- heat intolerance
- height loss
- hemiballismus
- hemianopia
- hemiparesis
- hemispatial neglect
- hepatic cysts
- hepatic metastases
- hepatomegaly
- hidradenitis suppurativa
- high-arched palate
- hip dislocation
- hippocampal dysgenesis
- hirschsprung's disease
- hot flushes
- hydronephrosis
- hypolipidaemia
- hyperactivity
- hyperacusis
- hyperandrogenaemia
- hypercalciuria
- hypercapnea
- hypercholesterolaemia
- hypercortisolaemia
- hyperflexibility
- hyperglucagonaemia
- hyperhidrosis
- hyperhomocysteinaemia
- hypernasal speech
- hyperopia
- hyperoxaluria
- hyperpigmentation
- hyperplasia
- hyperpnoea
- hypersalivation
- hyperseborrhea
- hypersomnia
- hyperthermia
- hypertrichosis
- hypertrophy
- hyperuricaemia
- hyperventilation
- hypoadrenalism
- hypoalbuminaemia
- hypocalciuria
- hypocitraturia
- hypomagnesaemia
- hypopigmentation
- hypoplastic scrotum
- hypopotassaemia
- hypoprolactinaemia
- hyporeflexia
- hyposmia
- hypospadias
- hypotension
- hypothermia
- hypotonia
- hypoventilation
- hypovitaminosis d
- hypovolaemia
- hypovolaemic shock
- hypoxia
- immunodeficiency
- impulsivity
- inattention
- infections
- inflexibility
- insomnia
- instability
- intussusception
- irritability
- ischaemia
- ischuria
- itching
- jaundice
- keratoconus
- ketonuria
- ketotic odour
- kidney dysplasia
- kidney stones
- kyphoscoliosis
- kyphosis
- labioscrotal fold abnormalities
- laceration
- late dentition
- learning difficulties
- leg pain
- legs - increased length
- leukaemia
- leukocytosis
- libido increase
- libido reduction/loss
- lichen sclerosus
- lips - dry
- lips - thin
- little finger - in-curved
- little finger - short
- liver masses
- lordosis
- lordosis (loss of)
- lymphadenectomy
- lymphadenitis
- lymphocytosis
- lymphoedema
- macroglossia
- malaise
- malaise (post-exertional)
- malodorous perspiration
- mania
- marcus gunn pupil
- mastalgia
- meckel's diverticulum
- melena
- menorrhagia
- menstrual disorder
- mesenteric ischaemia
- metabolic alkalosis
- microalbuminuria
- microcephaly
- micrognathia
- micropenis
- milk-alkali syndrome
- miscarriage
- mood changes/swings
- mouth - down-turned
- mouth - small
- movement - limited range of
- mucosal pigmentation
- muscle atrophy
- muscle freezing
- muscle hypertrophy
- muscle rigidity
- myalgia
- myasthaenia
- mydriasis
- myelodysplasia
- myeloma
- myoclonus
- myodesopsia
- myokymia
- myopathy
- myopia
- myosis
- nail clubbing
- nail dystrophy
- nasal obstruction
- nausea
- neck - loose skin (nape)
- neck - short
- neck mass
- neck pain/discomfort
- necrolytic migratory erythema
- necrosis
- nephrocalcinosis
- nephropathy
- neurofibromas
- night terrors
- nipple change
- nipple discharge
- nipple inversion
- nipple retraction
- nipples widely spaced
- nocturia
- normochromic normocytic anaemia
- nose - depressed bridge
- nose - flat bridge
- nose - thickening
- nystagmus
- obsessive-compulsive disorder
- obstetrical haemorrhage
- obstructive sleep apnoea
- odynophagia
- oedema
- oesophageal atresia
- oesophagitis
- oligomenorrhoea
- oliguria
- onychauxis
- oophoritis
- ophthalmoplegia
- optic atrophy
- orbital fat prolapse
- orbital hypertelorism
- orthostatic hypotension
- osteoarthritis
- osteopenia
- otitis media
- ovarian cysts
- ovarian hyperplasia
- palatoschisis
- pallor
- palmar erythema
- palpebral fissure (downslanted)
- palpebral fissure (extended)
- palpebral fissure (reduced)
- palpebral fissure (upslanted)
- palpitations
- pancreatic fibrosis
- pancytopaenia
- panic attacks
- papilloedema
- paraesthesia
- paralysis
- paranoia
- patellar dislocation
- patellar subluxation
- pedal ulceration
- pellagra
- pelvic mass
- pelvic pain
- penile agenesis
- peptic ulcer
- pericardial effusion
- periodontitis
- periosteal bone reactions
- peripheral oedema
- personality change
- pes cavus
- petechiae
- peyronie's disease
- pharyngitis
- philtrum - long
- philtrum - short
- phosphaturia
- photophobia
- photosensitivity
- pleurisy
- poikiloderma
- polydactyly
- polydipsia
- polyphagia
- polyuria
- poor wound healing
- postmenopausal bleeding
- post-nasal drip
- postprandial fullness
- postural instability
- prehypertension
- premature birth
- premature labour
- prenatal growth retardation
- presbyopia
- pretibial myxoedema
- proctalgia fugax
- prognathism
- proptosis
- prosopagnosia
- proteinuria
- pruritus
- pruritus scroti
- pruritus vulvae
- pseudarthrosis
- psoriatic arthritis
- psychiatric problems
- psychomotor retardation
- psychosis
- pterygium colli
- ptosis
- puberty (delayed/absent)
- puberty (early/precocious)
- puffiness
- pulmonary embolism
- purpura
- pyelonephritis
- pyloric stenosis
- pyrexia
- pyrosis
- pyuria
- rash
- rectal pain
- rectorrhagia
- refractory anemia
- reluctance to weight-bear
- renal agenesis
- renal clubbing
- renal colic
- renal cyst
- renal failure
- renal insufficiency
- renal phosphate wasting (isolated)
- renal tubular acidosis
- respiratory failure
- reticulocytosis
- retinitis pigmentosa
- retinopathy
- retrobulbar pain
- retrograde ejaculation
- retroperitoneal fibrosis
- salivary gland swelling
- salpingitis
- salt craving
- salt wasting
- sarcoidosis
- schizophrenia
- scoliosis
- scotoma
- seborrhoeic dermatitis
- seizures
- sensory loss
- sepsis
- septic arthritis
- septic shock
- shivering
- singultus
- sinusitis
- sixth nerve palsy
- skeletal deformity
- skeletal dysplasia
- skin - texture change
- skin infections
- skin necrosis
- skin pigmentation - spotty
- skin thickening
- skin thinning
- sleep apnoea
- sleep difficulties
- sleep disturbance
- sleep hyperhidrosis
- slow growth
- slurred speech
- social difficulties
- soft tissue swelling
- somnambulism
- somniloquy
- somnolence
- sore throat
- spasms
- spastic paraplegia
- spasticity
- speech delay
- spider naevi
- splenomegaly
- sputum production
- steatorrhoea
- stomatitis
- strabismus
- strangury
- striae
- stridor
- stroke
- subfertility
- suicidal ideation
- supraclavicular fat pads
- supranuclear gaze palsy
- sweating
- syncope
- syndactyly
- tachycardia
- tachypnoea
- teeth gapping
- telangiectasias
- telecanthus
- tetraparesis
- t-reflex (absent)
- t-reflex (depressed)
- tetany
- thermodysregulation
- thrombocytopenia
- thrombocytosis
- thrombophilia
- thrush
- tics
- tinnitus
- toe clubbing
- toe deformities
- toes - thick
- toes - widely spaced
- tongue - protruding
- tracheo-oesophageal compression
- tracheo-oesophageal fistula
- tremulousness
- tricuspid insufficiency
- umbilical hernia
- uraemia
- ureter duplex
- uricaemia
- urinary frequency
- urinary incontinence
- urogenital sinus
- urticaria
- uterine hyperplasia
- uterus duplex
- vagina duplex
- vaginal bleeding
- vaginal discharge
- vaginal dryness
- vaginal pain/tenderness
- vaginism
- ventricular fibrillation
- ventricular hypertrophy
- vertigo
- viraemia
- virilisation (abnormal)
- vision - acuity reduction
- vision - blurred
- visual disturbance
- visual field defect
- visual impairment
- visual loss
- vitiligo
- vocal cord paresis
- vomiting
- von graefe's sign
- weight gain
- weight loss
- wheezing
- widened joint space(s)
- xeroderma
- xerostomia
- 3-methoxy 4-hydroxy mandelic acid
- 17-hydroxypregnenolone (urine)
- 17-ketosteroids
- 25-hydroxyvitamin-d3
- 5hiaa
- aberrant adrenal receptors
- acid-base balance
- acth stimulation
- activated partial thromboplastin time
- acyl-ghrelin
- adrenal antibodies
- adrenal function
- adrenal scintigraphy
- adrenal venous sampling
- afp tumour marker
- alanine aminotransferase
- albumin
- albumin to creatinine ratio
- aldosterone (24-hour urine)
- aldosterone (blood)
- aldosterone (plasma)
- aldosterone (serum)
- aldosterone to renin ratio
- alkaline phosphatase
- alkaline phosphatase (bone-specific)
- alpha-fetoprotein
- ammonia
- amniocentesis
- amylase
- angiography
- anion gap
- anti-acetylcholine antibodies
- anticardiolipin antibody
- anti-insulin antibodies
- anti-islet cell antibody
- anti-gh antibodies
- antinuclear antibody
- anti-tyrosine phosphatase antibodies
- asvs
- barium studies
- basal insulin
- base excess
- apolipoprotein h
- beta-hydroxybutyrate
- bicarbonate
- bilirubin
- biopsy
- blood film
- blood pressure
- bmi
- body fat mass
- bone age
- bone biopsy
- bone mineral content
- bone mineral density
- bone mineral density test
- bone scintigraphy
- bone sialoprotein
- bound insulin
- brca1/brca2
- c1np
- c3 complement
- c4 complement
- ca125
- calcifediol
- calcium (serum)
- calcium (urine)
- calcium to creatinine clearance ratio
- carcinoembryonic antigen
- cardiac index
- catecholamines (24-hour urine)
- catecholamines (plasma)
- cd-56
- chemokines
- chest auscultation
- chloride
- chorionic villus sampling
- chromatography
- chromogranin a
- chromosomal analysis
- clomid challenge
- clonidine suppression
- collagen
- colonoscopy
- colposcopy
- continuous glucose monitoring
- core needle biopsy
- corticotropin-releasing hormone stimulation test
- cortisol (9am)
- cortisol (plasma)
- cortisol (midnight)
- cortisol (salivary)
- cortisol (serum)
- cortisol day curve
- cortisol, free (24-hour urine)
- c-peptide (24-hour urine)
- c-peptide (blood)
- c-reactive protein
- creatinine
- creatine kinase
- creatinine (24-hour urine)
- creatinine (serum)
- creatinine clearance
- crh stimulation
- ctpa scan
- ct scan
- c-telopeptide
- cytokines
- deoxypyridinoline
- dexa scan
- dexamethasone suppression
- dexamethasone suppression (high dose)
- dexamethasone suppression (low dose)
- dhea sulphate
- discectomy
- dldl cholesterol
- dmsa scan
- dna sequencing
- domperidone
- down syndrome screening
- ductal lavage
- echocardiogram
- eeg
- electrocardiogram
- electrolytes
- electromyography
- endoscopic ultrasound
- endoscopy
- endosonography
- enzyme immunoassay
- epinephrine (plasma)
- epinephrine (urine)
- erythrocyte sedimentation rate
- estimated glomerular filtration rate
- ethanol ablation
- ewing and clarke autonomic function
- exercise tolerance
- fbc
- ferritin
- fine needle aspiration biopsy
- flow cytometry
- fludrocortisone suppression
- fluticasone-propionate-17-beta carboxylic acid
- fmri
- folate
- ft3
- ft4
- gada
- gallium nitrate
- gallium scan
- gastric biopsy
- genetic analysis
- genitography
- gh day curve
- gh stimulation
- gh suppression
- glp-1
- glp-2
- glucose suppression test
- glucose (blood)
- glucose (blood, fasting)
- glucose (blood, postprandial)
- glucose (urine)
- glucose tolerance
- glucose tolerance (intravenous)
- glucose tolerance (oral)
- glucose tolerance (prolonged)
- gluten sensitivity
- gnrh stimulation
- gonadotrophins
- growth hormone-releasing peptide-2 test
- gut hormones (fasting)
- haematoxylin and eosin staining
- haemoglobin
- haemoglobin a1c
- hcg (serum)
- hcg (urine)
- hcg stimulation
- hdl cholesterol
- hearing test
- heart rate
- hepatic venous sampling with arterial stimulation
- high-sensitivity c-reactive protein
- histopathology
- hla genotyping
- holter monitoring
- homa
- homocysteine
- hyaluronic acid
- hydrocortisone day curve
- hydroxyproline
- hydroxyprogesterone
- hysteroscopy
- igfbp2
- igfbp3
- igg4/igg ratio
- immunocytochemistry
- immunohistochemistry
- immunoglobulins
- immunoglobulin g2
- immunoglobulin g4
- immunoglobulin a
- immunoglobulin m
- immunostaining
- inferior petrosal sinus sampling
- inhibin b
- insulin (fasting)
- insulin suppression
- insulin tissue resistance tests
- insulin tolerance
- intracranial pressure
- irm imaging
- ketones (plasma)
- ketones (urine)
- kidney function
- lactate
- lactate dehydrogenase
- laparoscopy
- laparoscopy and dye
- laparotomy
- ldl cholesterol
- leuprolide acetate stimulation
- leukocyte esterase (urine)
- levothyroxine absorption
- lipase (serum)
- lipid profile
- liquid-based cytology
- liquid chromatography-mass spectrometry
- liver biopsy
- liver function
- lumbar puncture
- lung function testing
- luteinising hormone releasing hormone test
- macroprolactin
- magnesium
- mag3 scan
- mammogram
- mantoux test
- metanephrines (plasma)
- metanephrines (urinary)
- methoxytyramine
- metoclopramide
- metyrapone cortisol day curve
- metyrapone suppression
- metyrapone test dose
- mibg scan
- microarray analysis
- molecular genetic analysis
- mri
- myocardial biopsy
- nerve conduction study
- neuroendocrine markers
- neuron-specific enolase
- norepinephrine
- ntx
- oct
- octreotide scan
- octreotide suppression test
- osmolality
- ovarian venous sampling
- p1np
- palpation
- pap test
- parathyroid scintigraphy
- pentagastrin
- perchlorate discharge
- percutaneous umbilical blood sampling
- peripheral blood film
- pet scan
- ph (blood)
- phosphate (serum)
- phosphate (urine)
- pituitary function
- plasma osmolality
- plasma viscosity
- platelet count
- pneumococcal antigen
- pneumococcal pcr
- polymerase chain reaction
- polysomnography
- porter-silber chromogens
- potassium
- pregnancy test
- proinsulin
- prostate-specific antigen
- protein electrophoresis
- protein fingerprinting
- protein folding analysis
- psychiatric assessment
- psychometric assessment
- pulse oximetry
- pyelography
- pyridinium crosslinks
- quicki
- plasma renin activity
- radioimmunoassay
- radionuclide imaging
- raiu test
- red blood cell count
- renal biopsy
- renin (24-hour urine)
- respiratory status
- renin (blood)
- renin plasma activity
- rheumatoid factor
- salt loading
- sdldl cholesterol
- secretin stimulation
- selective parathyroid venous sampling
- selective transhepatic portal venous sampling
- semen analysis
- serotonin
- serum osmolality
- serum free insulin
- sestamibi scan
- sex hormone binding globulin
- shbg
- skeletal muscle mass
- skin biopsy
- sleep diary
- sodium
- spect scan
- supervised 72-hour fast
- surgical biopsy
- sweat test
- synaptophysin
- systemic vascular resistance index
- tanner scale
- thoracocentesis
- thyroid transcription factor-1
- thyroglobulin
- thyroid antibodies
- thyroid function
- thyroid scintigraphy
- thyroid ultrasonography
- total cholesterol
- total ghrelin
- total t3
- total t4
- trabecular thickness
- transaminase
- transvaginal ultrasound
- trap 5b
- trh stimulation
- triglycerides
- triiodothyronine (t3) suppression
- troponin
- tsh receptor antibodies
- type 3 precollagen
- type 4 collagen
- ultrasound-guided biopsy
- ultrasound scan
- urea and electrolytes
- uric acid (blood)
- uric acid (urine)
- urinalysis
- urinary free cortisol
- urine 24-hour volume
- urine osmolality
- vaginal examination
- vanillylmandelic acid (24-hour urine)
- visual field assessment
- vitamin b12
- vitamin e
- waist circumference
- water deprivation
- water load
- weight
- western blotting
- white blood cell count
- white blood cell differential count
- x-ray
- zinc
- abscess drainage
- acetic acid injection
- adhesiolysis
- adrenalectomy
- amputation
- analgesics
- angioplasty
- arthrodesis
- assisted reproduction techniques
- bariatric surgery
- bilateral salpingo-oophorectomy
- blood transfusion
- bone grafting
- caesarean section
- cardiac transplantation
- cardiac pacemaker
- cataract extraction
- chemoembolisation
- chemotherapy
- chemoradiotherapy
- clitoroplasty
- continuous renal replacement therapy
- contraception
- cordotomy
- counselling
- craniotomy
- cryopreservation
- cryosurgical ablation
- debridement
- dialysis
- diazoxide
- diet
- duodenotomy
- endonasal endoscopic surgery
- exercise
- external fixation
- extracorporeal shock wave lithotripsy
- extraocular muscle surgery
- eye surgery
- eyelid surgery
- fasciotomy
- fluid repletion
- fluid restriction
- gamma knife radiosurgery
- gastrectomy
- gastrostomy
- gender reassignment surgery
- gonadectomy
- heart transplantation
- hormone replacement
- hormone suppression
- hypophysectomy
- hysterectomy
- inguinal orchiectomy
- internal fixation
- intra-cardiac defibrillator
- islet transplantation
- ivf
- kidney transplantation
- laparoscopic adrenalectomy
- laryngoplasty
- laryngoscopy
- laser lithotripsy
- light treatment
- liver transplantation
- lumpectomy
- lymph node dissection
- mastectomy
- molecularly targeted therapy
- neuroendoscopic surgery
- oophorectomy
- orbital decompression
- orbital radiation
- orchidectomy
- orthopaedic surgery
- osteotomy
- ovarian cystectomy
- ovarian diathermy
- oxygen therapy
- pancreas transplantation
- pancreatectomy
- pancreaticoduodenectomy
- parathyroidectomy
- percutaneous adrenal ablation
- percutaneous nephrolithotomy
- pericardiocentesis
- pericardiotomy
- physiotherapy
- pituitary adenomectomy
- plasma exchange
- plasmapheresis
- psychotherapy
- radiofrequency ablation
- radionuclide therapy
- radiotherapy
- reconstruction of genitalia
- resection of tumour
- right-sided hemicolectomy
- salpingo-oophorectomy
- small bowel resection
- speech and language therapy
- spinal surgery
- splenectomy
- stereotactic radiosurgery
- termination of pregnancy
- thymic transplantation
- thyroidectomy
- tracheostomy
- transcranial surgery
- transsphenoidal surgery
- transtentorial surgery
- vaginoplasty
- vagotomy
- 5-alpha-reductase inhibitors
- 17?-estradiol
- abiraterone
- acarbose
- acetazolamide
- acetohexamide
- adalimumab
- albiglutide
- alendronate
- alogliptin
- alpha-blockers
- alphacalcidol
- alpha-glucosidase inhibitors
- amiloride
- amlodipine
- amoxicillin
- anastrozole
- angiotensin-converting enzyme inhibitors
- angiotensin receptor antagonists
- anthracyclines
- antiandrogens
- antibiotics
- antiemetics
- antiepileptics
- antipsychotics
- antithyroid drugs
- antiseptic
- antivirals
- aripiprazole
- aromatase inhibitors
- aspirin
- astragalus membranaceus
- ativan
- atenolol
- atorvastatin
- avp receptor antagonists
- axitinib
- azathioprine
- bendroflumethiazide
- benzodiazepines
- beta-blockers
- betamethasone
- bexlosteride
- bicalutamide
- bisphosphonates
- bleomycin
- botulinum toxin
- bromocriptine
- cabergoline
- cabozantinib
- calcimimetics
- calcitonin (salmon)
- calcium
- calcium carbonate
- calcium chloride
- calcium dobesilate
- calcium edta
- calcium gluconate
- calcium-l-aspartate
- calcium polystyrene sulphonate
- canagliflozin
- capecitabine
- captopril
- carbimazole
- carboplatin
- carbutamide
- carvedilol
- ceftriaxone
- chlorothiazide
- chlorpropamide
- cholecalciferol
- cholinesterase inhibitors
- ciclosporin
- cinacalcet
- cisplatin
- clodronate
- clomifene
- clomiphene citrate
- clopidogrel
- co-cyprindiol
- codeine
- colonic polyps
- combined oral contraceptive pill
- conivaptan
- cortisone acetate
- continuous subcutaneous hydrocortisone infusion
- continuous subcutaneous insulin infusion
- coumadin
- corticosteroids
- cortisol
- cyproterone acetate
- dacarbazine
- danazol
- dapagliflozin
- daunorubicin
- deferiprone
- demeclocycline
- denosumab
- desmopressin
- dexamethasone
- diazepam
- diethylstilbestrol
- digoxin
- diltiazem
- diphenhydramine
- diuretics
- docetaxel
- dopamine agonists
- dopamine antagonists
- dopamine receptor agonists
- doxazosin
- doxepin
- doxorubicin
- dpp4 inhibitors
- dutasteride
- dutogliptin
- eflornithine
- enoxaparin
- empagliflozin
- epinephrine
- epirubicin
- eplerenone
- epristeride
- equilenin
- equilin
- erlotinib
- ethinylestradiol
- etidronate
- etomidate
- etoposide
- everolimus
- exenatide
- fenofibrate
- finasteride
- fluconazole
- fluticasone
- fludrocortisone
- fluorouracil
- fluoxetine
- flutamide
- furosemide
- gaba receptor antagonists
- gefitinib
- gemcitabine
- gemigliptin
- ginkgo biloba
- glibenclamide
- glibornuride
- gliclazide
- glimepiride
- glipizide
- gliquidone
- glisoxepide
- glp1 agonists
- glucose
- glyclopyramide
- gnrh analogue
- gnrh antagonists
- heparin
- hrt (menopause)
- hydrochlorothiazide
- hydrocortisone
- ibandronate
- ibuprofen
- idarubicin
- idebenone
- imatinib
- immunoglobulin therapy
- implanon
- indapamide
- infliximab
- iron supplements
- isoniazid
- insulin aspart
- insulin glargine
- insulin glulisine
- insulin lispro
- interferon
- intrauterine system
- iopanoic acid
- ipilimumab
- ipragliflozin
- irbesartan
- izonsteride
- ketoconazole
- labetalol
- lactulose
- lanreotide
- leuprolide acetate
- levatinib
- levodopa
- levonorgestrel
- levothyroxine
- linagliptin
- liothyronine
- liraglutide
- lithium
- lisinopril
- lixivaptan
- loperamide
- loprazolam
- lormetazepam
- losartan
- low calcium formula
- magnesium glycerophosphate
- magnesium sulphate
- mecasermin
- medronate
- medroxyprogesterone acetate
- meglitinides
- menotropin
- metformin
- methadone
- methimazole
- methylprednisolone
- metoprolol
- metyrapone
- miglitol
- mitotane
- mitoxantrone
- mozavaptan
- mtor inhibitors
- multivitamins
- naproxen
- natalizumab
- nateglinide
- nelivaptan
- neridronate
- nifedipine
- nilutamide
- nitrazepam
- nivolumab
- nsaid
- octreotide
- oestradiol valerate
- olanzapine
- olpadronate
- omeprazole
- opioids
- oral contraceptives
- orlistat
- ornipressin
- otelixizumab
- oxandrolone
- oxidronate
- oxybutynin
- paclitaxel
- pamidronate
- pancreatic enzymes
- pantoprazole
- paracetamol
- paroxetine
- pasireotide
- pegvisomant
- perindopril
- phenobarbital
- phenoxybenzamine
- phosphate binders
- phosphate supplements
- phytohaemagglutinin induced interferon gamma
- pioglitazone
- plicamycin
- potassium chloride
- potassium iodide
- pramlintide
- prazosin
- prednisolone
- prednisone
- premarin
- promethazine
- propranolol
- propylthiouracil
- protease inhibitors
- proton pump inhibitors
- pyridostigmine
- quetiapine
- quinagolide
- quinestrol
- radioactive mibg
- radioactive octreotide
- radioiodine
- raloxifene
- ramipril
- relcovaptan
- remogliflozin etabonate
- repaglinide
- risperidone
- risedronate
- rituximab
- romidepsin
- rosiglitazone
- salbutamol
- saline
- salmeterol
- salt supplements
- satavaptan
- saxagliptin
- selective progesterone receptor modulators
- selenium
- sglt2 inhibitors
- sildenafil
- simvastatin
- sirolimus
- sitagliptin
- sodium bicarbonate
- sodium chloride
- sodium polystyrene sulfonate (kayexalate)
- somatostatin analogues
- sorafenib
- spironolactone
- ssris
- statins
- streptozotocin
- steroids
- strontium ranelate
- sucralfate
- sulphonylureas
- sunitinib
- tamoxifen
- taspoglutide
- temazepam
- temozolomide
- teplizumab
- terazosin
- teriparatide
- testolactone
- testosterone enanthate esters
- tetrabenazine
- thalidomide
- thiazolidinediones
- thyrotropin alpha
- tibolone
- tiludronate
- tiratricol (triac)
- tofogliflozin
- tolazamide
- tolbutamide
- tolvaptan
- tramadol
- trastuzumab
- trazodone
- triamcinolone
- triamterene
- trimipramine
- troglitazone
- tryptophan
- turosteride
- tyrosine-kinase inhibitors
- valproic acid
- valrubicin
- vandetanib
- vaptans
- vildagliptin
- vinorelbine
- voglibose
- vorinostat
- warfarin
- zaleplon
- z-drugs
- zoledronic acid
- zolpidem
- zopiclone
- cardiology
- dermatology
- gastroenterology
- general practice
- genetics
- geriatrics
- gynaecology
- nephrology
- neurology
- nursing
- obstetrics
- oncology
- otolaryngology
- paediatrics
- pathology
- podiatry
- psychology/psychiatry
- radiology/rheumatology
- rehabilitation
- surgery
- urology
- insight into disease pathogenesis or mechanism of therapy
- novel diagnostic procedure
- novel treatment
- unique/unexpected symptoms or presentations of a disease
- new disease or syndrome: presentations/diagnosis/management
- unusual effects of medical treatment
- error in diagnosis/pitfalls and caveats
- february
- 2022
Collapse
Affiliation(s)
- Aria Jazdarehee
- Department of Medicine and Faculty of Medicine, University of British Columbia, British Columbia, Canada
| | - Sawyer Huget-Penner
- Division of Endocrinology and Metabolism, Fraser Health Authority, British Columbia, Canada
| | - Monika Pawlowska
- Division of Endocrinology and Metabolism, University of British Columbia, British Columbia, Canada
| |
Collapse
|
32
|
Menth J, Maus M, Wagner KG. Assessment of Abrasion-Induced Visual Defects in Twin Screw Wet Granulation Using Wall Friction Measurements. AAPS PharmSciTech 2022; 23:47. [PMID: 34984575 PMCID: PMC8816612 DOI: 10.1208/s12249-021-02140-5] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/16/2021] [Accepted: 09/13/2021] [Indexed: 11/30/2022] Open
Abstract
Starting point of the presented study were abrasion effects occurring during a twin screw wet granulation (TSG) process of a new chemical entity (NCE) formulation, resulting in gray spots on the final tablets. Several actions and systematic changes of equipment and process parameter settings of TSG process were conducted which reduced the visual defect rate of the tablets, i.e., gray spots on the surface, below the specification limit. To understand the rationale and mechanism behind these improvements, correlations of defect rates and wall friction measurements using a Schulze ring shear tester were evaluated. To check the suitability of the method, a broad range of wall materials as well as powder formulations at various moisture levels were investigated with regard to their wall friction angle. As differences in wall friction angle could be detected, further experiments were conducted using wall material samples made out of different screw materials for TSG. Evaluation of these screw wall material samples gave first hints, which screw materials should be preferred in regard of friction for TSG process. In the finally presented case study, wall friction measurements were performed using the above mentioned NCE formulation with known abrasion issues at TSG processing. The results confirmed that changes which led to a reduced visual defect rate of tablets correlated with a decreased wall friction angle. The results suggest wall friction measurements as a potent tool for equipment selection and establishment of a suitable process window prior to conducting TSG experiments.
Collapse
|
33
|
Kübarsepp J, Juhani K, Tarraste M. Abrasion and Erosion Resistance of Cermets: A Review. Materials (Basel) 2021; 15:69. [PMID: 35009216 PMCID: PMC8746251 DOI: 10.3390/ma15010069] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 11/29/2021] [Revised: 12/14/2021] [Accepted: 12/17/2021] [Indexed: 06/14/2023]
Abstract
WC-based hardmetals are employed widely as wear-resistant ceramic-metal composites for tools and wear parts. Raw materials supply, environmental concerns and some limitations of hardmetals have directed efforts toward development of alternative wear-resistant composites-cermets. We present a current state of knowledge in the field of ceramic-rich (≥50 vol%) cermets behavior in abrasion and erosion conditions, which are the dominant types of wear in many industrial applications. Distinction is made between two-body and three-body abrasion, solid-particle erosion, and slurry erosion. Cermets, in particular TiC-, Ti(C,N)- and Cr3C2-based composites and hardmetals, are compared for their abrasive and erosive wear performance and mechanism. The review enabled formulation of tribological conditions in which cermets may be comparable or have potential to outperform WC-Co hardmetals. Hardmetals, in general, outperform cermets in abrasion and solid-particle erosion at room and moderate temperatures. However, cermets demonstrate their potential mainly in severe conditions-at elevated temperatures and corrosive (oxidation, electrochemical corrosion) environments.
Collapse
|
34
|
Yang T, Luo J, Nowack B. Characterization of Nanoplastics, Fibrils, and Microplastics Released during Washing and Abrasion of Polyester Textiles. Environ Sci Technol 2021; 55:15873-15881. [PMID: 34784483 DOI: 10.1021/acs.est.1c04826] [Citation(s) in RCA: 41] [Impact Index Per Article: 13.7] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
Nanoplastics (defined here as plastic particles smaller than 1000 nm) released during the daily use of plastic products are gaining increasing attention due to their potential effects on human and environmental health. Formation of nanoplastics has been reported so far for diverse plastic products under varying conditions of use. The washing of synthetic textiles has been identified as an important source of microplastic fibers (MPF) released to the environment. In addition, abrasion of textiles was shown to induce further fragmentation of fibers and subsequent formation of much smaller and shorter fibrils. The aim of this work was to identify whether washing and wearing of textiles also results in the formation of nanoplastics. We designed washing and abrasion experiments to investigate the morphology, number, and size of micro- and nanoplastics released from polyester textiles. Using a combination of techniques including scanning transmission X-ray microspectroscopy (STXM), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and nanoparticle tracking analysis (NTA), we were able to quantify nanoplastics (average hydrodynamic diameter 173-188 nm), microplastic fibrils (diameter 3 ± 1 μm, length 20-160 μm), and MPFs (diameter 16 ± 7 μm, length up to 5 mm). The presence of polyester nanoplastics was confirmed by the near edge X-ray absorption fine spectra (NEXAFS) of the nanoparticles in the abrasion and washing samples for particles larger than 100 nm. We estimated that in the abraded samples, 1 g of fleece textile released an average of 2.1× 1011 nanoplastic particles (1.4 mg), 1.4 × 104 MPFs (1.0 mg), and 5.3 × 105 fibrils (0.5 mg) based on SEM images and NTA. In the nonabraded samples, 1 g of textile released an average of 3.3 × 1011 nanoplastic particles (2.1 mg), 2.8 × 103 MPFs (0.2 mg), and no fibrils. The present study is the first to show a significant release of polyester nanoplastics during the washing and abrasion of synthetic textiles.
Collapse
Affiliation(s)
- Tong Yang
- Technology and Society Laboratory, Empa - Swiss Federal Laboratories for Materials Science and Technology, Lerchenfeldstrasse 5, 9014 St. Gallen, Switzerland
| | - Jialuo Luo
- Laboratory for Biomimetic Membranes and Textiles, Empa - Swiss Federal Laboratories for Materials Science and Technology, Lerchenfeldstrasse 5, 9014 St. Gallen, Switzerland
| | - Bernd Nowack
- Technology and Society Laboratory, Empa - Swiss Federal Laboratories for Materials Science and Technology, Lerchenfeldstrasse 5, 9014 St. Gallen, Switzerland
| |
Collapse
|
35
|
Kuo CC, Li DY, Lin ZC, Kang ZF. Characterizations of Polymer Gears Fabricated by Differential Pressure Vacuum Casting and Fused Deposition Modeling. Polymers (Basel) 2021; 13:4126. [PMID: 34883629 DOI: 10.3390/polym13234126] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/28/2021] [Revised: 11/18/2021] [Accepted: 11/23/2021] [Indexed: 11/17/2022] Open
Abstract
In recent years, polymer gears have gradually become more widely employed in medium or heavy-duty conditions based on weight reduction in transmission systems because of low costs and low noise compared to metal gears. In the current industry, proposing a cost-effective approach to the manufacture of polymer gears is an important research issue. This paper investigates the wear performance of polymer gears fabricated with eight different kinds of materials using differential pressure vacuum casting and additive manufacturing techniques. It was found that both additive manufacturing and differential pressure vacuum casting seem to be an effective and cost-effective method for low-volume production of polymer gears for industrial applications. The gate number of one is the optimal design to manufacture a silicone rubber mold for differential pressure vacuum casting since the weld line of the polymer is only one. Polyurethane resin, 10 wt.% glass fiber-reinforced polylatic acid (PLA), or 10 wt.% carbon fiber-reinforced PLA are suggested for manufacturing gears for small quantity demand based on the deformation and abrasion weight percentage under process conditions of 3000 rpm for 120 min; epoxy resin is not suitable for making gears because part of the teeth will be broken during abrasion testing.
Collapse
|
36
|
Labban N, Al Amri MD, Alnafaiy SM, Alhijji SM, Alenizy MA, Iskandar M, Feitosa S. Influence of Toothbrush Abrasion and Surface Treatments on Roughness and Gloss of Polymer-Infiltrated Ceramics. Polymers (Basel) 2021; 13:polym13213694. [PMID: 34771250 PMCID: PMC8587314 DOI: 10.3390/polym13213694] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/27/2021] [Revised: 10/08/2021] [Accepted: 10/08/2021] [Indexed: 11/16/2022] Open
Abstract
The aim of this study was to compare the surface roughness and gloss of polymer-infiltrated ceramics after simulated in vitro toothbrushing in different storage mediums. Four polymer- infiltrated ceramics were evaluated, Lava ultimate (LU), Vita enamic (EN), Shofu (SH), and Crystal ultra (CU). The control group was a feldspathic ceramic, Vita Mark II (VM). One hundred and twenty specimens (12 × 14 × 2.5 mm) were prepared using a precision saw. For each material (n = 24), the specimens were allocated into two groups, polished and stained. The specimens of each group were stored (for 7 days) in either citric acid (0.2N) or distilled water. Data for surface gloss (ΔE*SCE-SCI) and roughness (Ra) were evaluated before (baseline) and after simulated toothbrushing. For toothbrushing simulation, a toothpaste slurry containing a toothpaste of 100 relative dentin abrasion (RDA) and 0.3 ml distilled water was used for 3650 cycles (7300 strokes) for each specimen. Data were analyzed using t-test and ANOVA. A p-value of ≤ to 0.05 was considered significant. The highest mean value of surface gloss was identified in CU (stained—water) (4.3 (0.47)) (ΔE*) and EN (stained—acid) (4.3 (1.00)) (ΔE*) specimens, whereas the lowest mean value was shown by SH (stained—acid) (2.04 (0.42)) (ΔE*) samples. The highest mean value of surface roughness was observed in SH (0.40 (0.99)) Ra (stained—acid) whereas the lowest in VM (0.13 (0.039)) Ra (polished— water). A significant difference (p < 0.05) was observed in surface roughness and gloss between the materials with simulated toothbrushing, except in VM and LU, respectively. Therefore, it can be concluded that simulated toothbrushing impacts on surface roughness and gloss, irrespective of the storage medium.
Collapse
Affiliation(s)
- Nawaf Labban
- Department of Prosthetic Dental Sciences, College of Dentistry, King Saud University, Riyadh 11545, Saudi Arabia; (M.D.A.A.); (S.M.A.)
- Correspondence: ; Tel.: +9661467-9015
| | - Mohammad D. Al Amri
- Department of Prosthetic Dental Sciences, College of Dentistry, King Saud University, Riyadh 11545, Saudi Arabia; (M.D.A.A.); (S.M.A.)
| | - Sarah M. Alnafaiy
- Department of Prosthetic Dental Sciences, College of Dentistry, King Saud University, Riyadh 11545, Saudi Arabia; (M.D.A.A.); (S.M.A.)
| | - Saleh M. Alhijji
- College of Applied Medical Sciences, King Saud University, Riyadh 11545, Saudi Arabia;
- School of Dentistry, Indiana University, Indianapolis, IN 46202, USA
| | - Mohammad A. Alenizy
- Department of Restorative Dental Sciences, University of Hail, Hail 55475, Saudi Arabia;
| | - Mounir Iskandar
- Private Practice at Radiance Dentistry, Irving, TX 75063, USA;
| | - Sabrina Feitosa
- Department of Biomedical Sciences and Comprehensive Care, Division of Biomedical and Applied Sciences, Indiana University School of Dentistry, Indianapolis, IN 46202, USA;
| |
Collapse
|
37
|
Zoller MJ, Attin T, Wegehaupt FJ. Wear of conventional and pre-polymerized composite materials under erosive/abrasive conditions. Swiss Dent J 2021; 132:sdj-2022-02-01. [PMID: 34726363] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
The aim of this study was to examine the wear of three different composite materials usable for vertical bite reconstruction under erosive/abrasive conditions and to compare them with the bovine dental hard tissues enamel and dentin in-vitro. The composite materials Filtek Supreme XTE, CeraSmart and Brilliant Crios and bovine enamel and dentin specimens were evenly allocated to five groups (n=10). Samples were firstly exposed to hydrochloric acid for 1 min, then stored for 30 min in artificial saliva. In the second step, the samples were brushed for 1 min with 100 brushing strokes each and an applied force of 2.5 N in an automated brushing device. After 60 of these erosive/abrasive cycles, wear of the samples was determined by contact profilometry. Filtek Supreme XTE showed significantly less wear (mean ± standard deviation; 0.15 ± 0.11 μm) compared to the other two composite materials (p < 0.05). No significant difference (p > 0.05) could be found between CeraSmart (0.25 ± 0.03 μm) and Brilliant Crios (0.24 ± 0.04 μm). The two bovine dental hard tissues, enamel (13.70 ± 0.94 μm) and dentin (50.08 ± 4.46 μm), each showed a significantly higher amount of wear than the three restorative materials (p <0.05). In conclusion, this study exhibited that the three composite materials, Filtek Supreme XTE, CeraSmart and Brilliant Crios, were more resistant under erosive/abrasive conditions compared to bovine enamel and bovine dentin, respectively.
Collapse
Affiliation(s)
- Manuel J Zoller
- Resident, Clinic for Conservative Dentistry and Preventive Dentistry, Center for Dental Medicine, University of Zurich, Plattenstrasse 11, CH-8032 Zurich, Switzerland
| | - Thomas Attin
- Clinic for Conservative Dentistry and Preventive Dentistry, Center for Dental Medicine, University of Zurich, Plattenstrasse 11, CH-8032 Zurich Switzerland
| | - Florian J Wegehaupt
- Division of Preventive Dentistry and Oral Epidemiology, Clinic for Conservative Dentistry and Preventive Dentistry, Center for Dental Medicine, University of Zurich, Plattenstrasse 11, CH-8032 Zurich, Switzerland
| |
Collapse
|
38
|
Sousa VFC, Silva FJG, Lopes H, Casais RCB, Baptista A, Pinto G, Alexandre R. Wear Behavior and Machining Performance of TiAlSiN-Coated Tools Obtained by dc MS and HiPIMS: A Comparative Study. Materials (Basel) 2021; 14:5122. [PMID: 34576346 DOI: 10.3390/ma14185122] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 08/09/2021] [Revised: 08/25/2021] [Accepted: 09/04/2021] [Indexed: 11/17/2022]
Abstract
Duplex stainless steels are being used on applications that require high corrosion resistance and excellent mechanical properties, such as the naval and oil-gas exploration industry. The components employed in these industries are usually obtained by machining; however, these alloys have low machinability when compared to conventional stainless steels, usually requiring the employment of tool coatings. In the present work, a comparative study of TiAlSiN coating performance obtained by these two techniques in the milling of duplex stainless-steel alloy LDX 2101 was carried out. These coatings were obtained by the conventional direct current magnetron sputtering (dc MS) and the novel high power impulse magnetron sputtering (HiPIMS). The coatings were analyzed and characterized, determining mechanical properties for both coatings, registering slightly higher mechanical properties for the HiPIMS-obtained coating. Machining tests were performed with varying cutting length and feed-rate, while maintaining constant values for axial and radial depth of cut and cutting speed. The surface roughness of the material after machining was assessed, as well as the wear sustained by each of the tool types, identifying the wear mechanisms and behavior of these tools, as well as registering the flank wear values presented for each of the tested tools. The HiPIMS-obtained coating exhibited a very similar behavior when compared to the other, producing similar surface roughness quality. However, the HiPIMS coating exhibited less wear for higher cutting lengths, proving to be a better choice in this case, especially regarding tool life.
Collapse
|
39
|
Raj A, Ranjan R, Kumar A, Kumar M, Mala N, Ramesh K. Evaluation of Dental Status in Relation to Excessive Horizontal and Vertical Overlap in North Indian Population. J Pharm Bioallied Sci 2021; 13:S276-S279. [PMID: 34447092 PMCID: PMC8375840 DOI: 10.4103/jpbs.jpbs_731_20] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/28/2020] [Revised: 11/29/2020] [Accepted: 12/01/2020] [Indexed: 11/26/2022] Open
Abstract
Introduction: Tooth wear (attrition) is a multifactorial entity, the pathogenesis of which involves many factors but the role of malocclusion cannot be undermined. Overjet and overbite play an important role in defining occlusion, hence they should also play an important role in causing attrition. Objectives: This study aims to evaluate the relationship of dental health status between the vertical and horizontal overlap. Materials and Methods: This study was conducted on 600 patients selected randomly from rural population which were divided into three equal groups as per the predefined criteria, namely, horizontal overlap, vertical overlap, and control group. All patients were examined for the tooth attrition. Results: In Group 1 – 73 patients out of 200 showed one or more teeth attrition, in Group 2 – 38 patients out of 200 showed one or more teeth attrition, and in the control group, 22 patients out of 200 showed one or more teeth attrition. Conclusion: It was concluded that both vertical and horizontal abnormal relationships of teeth play an important role in the etiology of attrition, with abnormal horizontal overlap being the more detrimental as compared to the vertical one.
Collapse
Affiliation(s)
- Anil Raj
- Department of Public Health Dentistry, Sarjug Dental College and Hospital, Darbhanga, Bihar, India
| | - Ravi Ranjan
- Consultant Orthodontist, Deogar, Jharkhand, India
| | - Amit Kumar
- Consultant Endodontist, Patna, Bihar, India
| | - Mukesh Kumar
- Department of Orthodontics and Dentofacial Orthopaedics, Sarjug Dental College and Hospital, Darbhanga, Bihar, India
| | - Nutan Mala
- Department of Conservative Dentistry and Endodontics, Buddha Institute of Dental Science and Hospital, Patna, India
| | - Kumar Ramesh
- Department of Dentistry, Anugrah Narayan Magadh Medical College and Hospital, Gaya, Bihar, India
| |
Collapse
|
40
|
Greuling A, Emke JM, Eisenburger M. Abrasion Behaviour of Different Charcoal Toothpastes When Using Electric Toothbrushes. Dent J (Basel) 2021; 9:97. [PMID: 34436009 DOI: 10.3390/dj9080097] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/15/2021] [Revised: 08/10/2021] [Accepted: 08/18/2021] [Indexed: 11/17/2022] Open
Abstract
OBJECTIVES The purpose of this in vitro study was to compare the abrasion behaviour of different charcoal toothpastes when brushing with electric toothbrushes on human enamel. MATERIALS AND METHODS A self-designed brushing machine was built using six commercially available electric toothbrushes in abrasion chambers. Each chamber was constantly supplied with a toothpaste-water mix. Pieces of human enamel, which were embedded in PMMA, were brushed for 4 h. Before and after brushing, profilometer measurements were performed in order to determine the substance loss due to brushing. RESULTS The following calculated mean removal values (mean ± SD) were found: (4.6 ± 0.6) µm (Group C: Splat Blackwood), (3.2 ± 0.9) µm (Group D: Curaprox Black is White), (2.3 ± 0.7) µm (Group B: Sensodyne Pro Schmelz), (1.7 ± 0.6) µm (Group A: Water), (1.4 ± 0.6) µm (Group E: Prokudent Black Brilliant). A post hoc Tukey HSD test (p = 0.05) showed that the results for Group A/B/E, Group B/D and Group C each lie within subsets that differ statistically significantly from the other subsets. CONCLUSIONS Within the limitations of this in vitro study, it can be stated that some charcoal toothpastes lead to significantly higher abrasion on human enamel, when brushing with electric brushes. CLINICAL RELEVANCE As low-abrasion toothpaste is generally advisable, and some charcoal toothpastes should be viewed critically with regard to their abrasive properties.
Collapse
|
41
|
Tran DVP, Allawi A, Albayati A, Cao TN, El-Zohairy A, Nguyen YTH. Recycled Concrete Aggregate for Medium-Quality Structural Concrete. Materials (Basel) 2021; 14:ma14164612. [PMID: 34443133 PMCID: PMC8400108 DOI: 10.3390/ma14164612] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 07/13/2021] [Revised: 08/09/2021] [Accepted: 08/15/2021] [Indexed: 11/22/2022]
Abstract
This paper reports an evaluation of the properties of medium-quality concrete incorporating recycled coarse aggregate (RCA). Concrete specimens were prepared with various percentages of the RCA (25%, 50%, 75%, and 100%). The workability, mechanical properties, and durability in terms of abrasion of cured concrete were examined at different ages. The results reveal insignificant differences between the recycled concrete (RC) and reference concrete in terms of the mechanical and durability-related measurements. Meanwhile, the workability of the RC reduced vastly since the replacement of the RCA reached 75% and 100%. The ultrasound pulse velocity (UPV) results greatly depend on the porosity of concrete and the RC exhibited higher porosity than that of the reference concrete, particularly at the transition zone between the RCA and the new paste. Therefore, the sound transmission in the RC required longer times than that in the reference concrete. Moreover, a predictive equation relating the compressive strength to the UPV was developed.
Collapse
Affiliation(s)
- Dong Viet Phuong Tran
- Department of Civil Engineering, Industrial University of Ho Chi Minh City, Ho Chi Minh City 70000, Vietnam; (D.V.P.T.); (Y.T.H.N.)
| | - Abbas Allawi
- Department of Civil Engineering, University of Baghdad, Baghdad 17001, Iraq; (A.A.); (A.A.)
| | - Amjad Albayati
- Department of Civil Engineering, University of Baghdad, Baghdad 17001, Iraq; (A.A.); (A.A.)
| | - Thi Nguyen Cao
- Faculty of Civil Engineering, Tien Giang University, Mỹ Tho 84000, Vietnam;
| | - Ayman El-Zohairy
- Department of Engineering and Technology, Texas A&M University-Commerce, Commerce, TX 75429, USA
- Correspondence: ; Tel.: +1-903-468-8683
| | - Yen Thi Hai Nguyen
- Department of Civil Engineering, Industrial University of Ho Chi Minh City, Ho Chi Minh City 70000, Vietnam; (D.V.P.T.); (Y.T.H.N.)
| |
Collapse
|
42
|
Mrówka M, Woźniak A, Nowak J, Wróbel G, Sławski S. Determination of Mechanical and Tribological Properties of Silicone-Based Composites Filled with Manganese Waste. Materials (Basel) 2021; 14:ma14164459. [PMID: 34442982 PMCID: PMC8398512 DOI: 10.3390/ma14164459] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 07/18/2021] [Revised: 07/30/2021] [Accepted: 08/03/2021] [Indexed: 11/16/2022]
Abstract
High-tonnage industrial processes generate high amount of waste. This is a growing problem in the whole world. Neutralizing such waste can be time consuming and costly. One of the possibilities of their reuse is to use them as fillers in polymer composites. Introduction of the filler in polymer matrix causes change in its mechanical and tribological properties. In the article, the effect of introducing fillers from post-production waste, and its effect on changing the physical properties of silicone-based composites filled with manganese (II) oxide and waste manganese residue was investigated. The composites were made by gravity casting. Composites with 2.5, 5, 7.5, and 10 wt% of the fillers were examined. The composite materials were subjected to tests such as: density, hardness, resilience, tensile test, abrasion resistance, and ball-on-disc. Microscopic images showed that, the particles of the fillers are uniformly distributed in silicone matrix with the formation of smaller agglomerates. Such agglomerates introduced a discontinuity in the structure of the polymer material, which caused a decrease in the tensile strength and elongation at break for all tested compositions in comparison with the mechanical properties of the silicone used as the matrix. However, it was found that all silicone-based composites filled with manganese (II) oxide and manganese residue showed a reduction in abrasive wear, compared to the reference sample.
Collapse
Affiliation(s)
- Maciej Mrówka
- Department of Theoretical and Applied Mechanics, Silesian University of Technology, Konarskiego 18A, 44-100 Gliwice, Poland; (M.M.); (G.W.)
- Biotechnology Center, Silesian University of Technology, Krzywoustego 8, 44-100 Gliwice, Poland
| | - Anna Woźniak
- Department of Engineering Materials and Biomaterials, Silesian University of Technology, Konarskiego 18A, 44-100 Gliwice, Poland;
| | - Jerzy Nowak
- Zakłady Górniczo-Hutnicze “Bolesław” S.A. Capital Group, Kolejowa 37, 32-332 Bukowno, Poland;
| | - Gabriel Wróbel
- Department of Theoretical and Applied Mechanics, Silesian University of Technology, Konarskiego 18A, 44-100 Gliwice, Poland; (M.M.); (G.W.)
| | - Sebastian Sławski
- Department of Theoretical and Applied Mechanics, Silesian University of Technology, Konarskiego 18A, 44-100 Gliwice, Poland; (M.M.); (G.W.)
- Correspondence: ; Tel.: +48-32-237-12-87
| |
Collapse
|
43
|
Bossa N, Sipe JM, Berger W, Scott K, Kennedy A, Thomas T, Hendren CO, Wiesner MR. Quantifying Mechanical Abrasion of MWCNT Nanocomposites Used in 3D Printing: Influence of CNT Content on Abrasion Products and Rate of Microplastic Production. Environ Sci Technol 2021; 55:10332-10342. [PMID: 34264058 PMCID: PMC10084403 DOI: 10.1021/acs.est.0c02015] [Citation(s) in RCA: 13] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/27/2023]
Abstract
Manufactured nanomaterials (MNMs) are incorporated as "nanofillers" into consumer products to enhance properties of interest. Multiwalled carbon nanotubes (MWCNTs) are known for their unique properties and have many applications in polymers. However, the release of MWCNTs during the nanoenabled product life cycle is concerning. During the use phase, mechanical stresses can produce fragmented materials containing MNMs. The degree of MNM release, the resulting exposure to these materials, and the potential impacts of their release are active research topics. In this study, we describe methodological improvements to study the abrasion of plastics containing MNMs (nanocomposites) and report on characteristics of abrasion products produced and rates of microplastic production. The abrasion device developed for this work allows for the measurement of power inputs to determine scaled release rates. Abrasion rates for plastics used in 3D printing were found to be 0.27 g/m2/s for the PETG polymer and 0.3 g/m2/s for the 2% MWCNT-PETG nanocomposite. Embedded and protuberant MWCNTs appeared to impact the particle size, shape, hydrophobicity, and surface charge of the microplastics, while the inclusion of MWCNTs had a small effect on microplastic production. Measurements of power input to the abrasion process provided a basis for estimating microplastic production rates for these nanocomposites.
Collapse
Affiliation(s)
- Nathan Bossa
- Department of Civil and Environmental Engineering, Duke University, Durham, NC, 27708, USA
- Human & Environmental Health &Safety Group Materials Safety Unit, Leitat Technological Center, Carrer de la Innovació, 2, 08225, Terrassa, Spain
| | - Joana Marie Sipe
- Department of Civil and Environmental Engineering, Duke University, Durham, NC, 27708, USA
| | - William Berger
- Department of Civil and Environmental Engineering, Duke University, Durham, NC, 27708, USA
| | - Keana Scott
- Materials Measurement Science Division, National Institute of Standards and Technology, 100 Bureau Drive, MS-8372 Gaithersburg, MD 20899, United States
| | - Alan Kennedy
- US Army Engineer Research and Development Center, Environmental Laboratory, 3909 Halls Ferry Rd. Vicksburg, MS, USA
| | - Treye Thomas
- United States Consumer Product Safety Commission, 4330 East-West Highway, Bethesda, Maryland 20814, United States
| | - Christine Ogilvie Hendren
- Department of Civil and Environmental Engineering, Duke University, Durham, NC, 27708, USA
- Department of Geological and Environmental Sciences, Appalachian State University, 287 Rivers St, Boone, NC 28608, USA
| | - Mark R. Wiesner
- Department of Civil and Environmental Engineering, Duke University, Durham, NC, 27708, USA
| |
Collapse
|
44
|
Carlos DM, Almeida F, Carneiro JR, Lopes ML. Influence of Mechanical Damage under Repeated Loading on the Resistance of Geogrids against Abrasion. Materials (Basel) 2021; 14:3544. [PMID: 34201998 DOI: 10.3390/ma14133544] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/04/2021] [Revised: 06/11/2021] [Accepted: 06/15/2021] [Indexed: 11/17/2022]
Abstract
Geogrids are building materials widely used for soil reinforcement that can be affected by the action of many degradation agents throughout their service life. The potential negative effect of the degradation agents should be properly estimated and accounted for during the design phase. The main aim of this work was to study the influence of mechanical damage under repeated loading on the resistance of geogrids against abrasion. Three geogrids (one extruded and two woven) were exposed in isolation to mechanical damage under repeated loading and abrasion tests, followed by the successive exposure to both degradation tests. The damage suffered by the geogrids was evaluated by visual inspection and by tensile tests. Based on the changes found in tensile strength, reduction factors were determined. The reduction factors obtained directly from the successive exposure were compared to those resulting from a method in which the reduction factors obtained for the isolated effect of each degradation agent were multiplied. Results indicated that the abrasion process tended to be affected by a previous exposure to mechanical damage under repeated loading and that the multiplication of the reduction factors obtained for the isolated effects of the degradation agents may not correctly represent their combined effect.
Collapse
|
45
|
Salem MN, Hafez S. Aesthetic Management of Erosive Tooth Wear in a Young Egyptian Swimmer: A Case Report. Clin Cosmet Investig Dent 2021; 13:201-209. [PMID: 34079381 PMCID: PMC8164355 DOI: 10.2147/ccide.s308045] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/22/2021] [Accepted: 04/23/2021] [Indexed: 11/23/2022] Open
Abstract
Background Tooth wear can have a multifactorial aetiology which requires thorough patient assessment and aesthetic management. Purpose This case report discusses the management of a young, Egyptian swimmer complaining of tooth sensitivity associated with erosive tooth wear. Anterior teeth were restored using the injection molding technique, also known as the injectable composite resin technique, to overcome the patient’s complaint and enhance the aesthetics of compromised anterior teeth. Patients and Methods Thorough patient assessment was followed by impression taking, a diagnostic wax-up and intraoral mock-up fabrication for aesthetic, functional and biological verification. Upon the patient’s agreement on the proposed treatment, an injection molding technique was carried out. Conclusion The tooth loss pattern associated with erosive tooth wear in competitive swimmers showed a very characteristic presentation. Detailed patient history is imperative for successful assessment of the risk factors contributing to the condition and treatment planning in such cases. The use of injection molding technique for restoration of anterior teeth is a simple, straightforward and aesthetically pleasing alternative for patients with erosive tooth wear requiring direct composite veneers.
Collapse
Affiliation(s)
- Mennatallah N Salem
- Conservative Dentistry Department, Operative Division, Faculty of Oral and Dental Medicine, Misr International University, Cairo, Egypt.,Conservative Dentistry Department, Faculty of Dentistry, Cairo University, Cairo, Egypt
| | - Shereen Hafez
- Conservative Dentistry Department, Faculty of Dentistry, Cairo University, Cairo, Egypt
| |
Collapse
|
46
|
Czupryński A. Microstructure and Abrasive Wear Resistance of Metal Matrix Composite Coatings Deposited on Steel Grade AISI 4715 by Powder Plasma Transferred Arc Welding Part 2. Mechanical and Structural Properties of a Nickel-Based Alloy Surface Layer Reinforced with Particles of Tungsten Carbide and Synthetic Metal-Diamond Composite. Materials (Basel) 2021; 14:2805. [PMID: 34070349 DOI: 10.3390/ma14112805] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 04/18/2021] [Revised: 05/20/2021] [Accepted: 05/21/2021] [Indexed: 12/01/2022]
Abstract
The article is the continuation of a cycle of works published in a Special Issue of MDPI entitled “Innovative Technologies and Materials for the Production of Mechanical, Thermal and Corrosion Wear-Resistant Surface Layers and Coatings” related to tests concerning the microstructure and mechanical properties of innovative surface layers made using the Powder Plasma Transferred Arc Welding (PPTAW) method and intended for work surfaces of drilling tools and machinery applied in the extraction industry. A layer subjected to tests was a metal matrix composite, made using powder based on a nickel alloy containing spherical fused tungsten carbide (SFTC) particles, which are fused tungsten carbide (FTC) particles and spherical particles of tungsten-coated synthetic metal–diamond composite (PD-W). The layer was deposited on the substrate of low-alloy structural steel grade AISI 4715. The results showed that the chemical composition of the metallic powder as well as the content of the hard phase constituting the matrix enabled the making of a powder filler material characterised by very good weldability and appropriate melting. It was also found that the structure of the Ni-WC-PD-W layer was complex and that proper claddings (characterised by the uniform distribution of tungsten carbide (WC)) were formed in relation to specific cladding process parameters. In addition, the structure of the composite layer revealed the partial thermal and structural decomposition of tungsten carbide, while the particles of the synthetic metal–diamond composite remained coherent. The deposited surface layer was characterised by favourable resistance to moderate dynamic impact loads with a potential energy of 200 J, yet at the same time, by over 12 times lower metal–mineral abrasive wear resistance than the previously tested surface layer made of cobalt-based composite powder, the matrix of which contained the hard phase composed of TiC particles and synthetic metal–diamond composite. The lower abrasive wear resistance could result from a different mechanism responsible for the hardening of the spherical particles of the hard phase susceptible to separation from the metal matrix, as well as from a different mechanism of tribological wear.
Collapse
|
47
|
Czupryński A. Microstructure and Abrasive Wear Resistance of Metal Matrix Composite Coatings Deposited on Steel Grade AISI 4715 by Powder Plasma Transferred Arc Welding Part 1. Mechanical and Structural Properties of a Cobalt-Based Alloy Surface Layer Reinforced with Particles of Titanium Carbide and Synthetic Metal-Diamond Composite. Materials (Basel) 2021; 14:2382. [PMID: 34063703 PMCID: PMC8124939 DOI: 10.3390/ma14092382] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 04/18/2021] [Revised: 04/30/2021] [Accepted: 05/01/2021] [Indexed: 11/22/2022]
Abstract
The article discusses test results concerning an innovative surface layer obtained using the cladding with powder plasma transferred arc welding (PPTAW) method. The above-named layer, being a metal matrix composite (MCM), is characterised by high abrasive wear resistance, resistance to pressure and impact loads, and the possibility of operation at elevated temperatures. The layer was made using powder in the form of a cobalt alloy-based composite reinforced with monocarbide TiC particles and superhard spherical particles of synthetic metal-diamond composite provided with tungsten coating. The surface layer was deposited on a sheet made of low-alloy structural steel grade AISI 4715. The layer is intended for surfaces of inserts of drilling tools used in the extraction industry. The results showed the lack of the thermal and structural decomposition of the hard layer reinforcing the matrix during the cladding process, its very high resistance to metal-mineral abrasive wear and its resistance to moderate impact loads. The abrasive wear resistance of the deposited layer with particles of TiC and synthetic metal-diamond composite was about than 140 times higher than the abrasive wear resistance of abrasion resistant heat-treated steel having a nominal hardness of 400 HBW. The use of diamond as a metal matrix reinforcement in order to increase the abrasive resistance of the PPTAW overlay layer is a new and innovative area of inquiry. There is no information related to tests concerning metal matrix surface layers reinforced with synthetic metal-diamond composite and obtained using PPTAW method.
Collapse
Affiliation(s)
- Artur Czupryński
- Department of Welding Engineering, Faculty of Mechanical Engineering, Silesian University of Technology, Konarskiego 18A, 44-100 Gliwice, Poland
| |
Collapse
|
48
|
Tauböck TT, Schmidlin PR, Attin T. Vertical Bite Rehabilitation of Severely Worn Dentitions with Direct Composite Restorations: Clinical Performance up to 11 Years. J Clin Med 2021; 10:jcm10081732. [PMID: 33923679 PMCID: PMC8073648 DOI: 10.3390/jcm10081732] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/16/2021] [Revised: 04/07/2021] [Accepted: 04/13/2021] [Indexed: 01/13/2023] Open
Abstract
Our aim was to evaluate the clinical performance of direct composite restorations placed in patients with severely worn dentitions at an increased vertical dimension of occlusion, after up to 11 years. One hundred and sixty-four teeth in 13 patients with severely worn dentitions had been reconstructed with either microhybrid (first cohort; n = 59) or nanofilled (second cohort; n = 105) composite restorations at increased vertical dimension of occlusion using a wax-up-based template-aided placement technique. From the dental records, information about repair and replacement of restorations was obtained. Patients were clinically examined after a mean follow-up time of 10.7 years (first cohort) or 5.2 years (second cohort) using United States Public Health Service (USPHS) criteria. Subjective patient satisfaction was also recorded using visual analogue scales (VAS). The overall quality of the restorations was good with predominantly 'Alpha' and 'Bravo' scores, respectively. Nanofilled composite showed less surface degradation and better margin qualities than microhybrid composite. Of the 59 restored teeth in the first cohort, 13 restorations showed unfavorable events after 10.7 years, of which ten could be repaired. In the second cohort, 23 of 105 restorations showed unfavorable events, which could all be repaired. VAS scores revealed high patient satisfaction with the treatment approach. In conclusion, direct composite restorations placed at an increased vertical dimension of occlusion show good clinical long-term performance in patients with severe tooth wear.
Collapse
|
49
|
Patti A, Costa F, Perrotti M, Barbarino D, Acierno D. Polyurethane Impregnation for Improving the Mechanical and the Water Resistance of Polypropylene-Based Textiles. Materials (Basel) 2021; 14:ma14081951. [PMID: 33924577 PMCID: PMC8068850 DOI: 10.3390/ma14081951] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 02/12/2021] [Revised: 04/07/2021] [Accepted: 04/09/2021] [Indexed: 11/16/2022]
Abstract
Commercial waterborne polyurethane (PU) dispersions, different in chemistry and selected on the basis of eco-friendly components, have been applied to a common polypropylene (PP)-based woven fabric. Impregnation has been chosen as a textile treatment for improving the features of basic technical textiles in light of potential applicability in luggage and bag production. The effect of drying method, performed under conditions achieved by varying the process temperature and pressure, on the features of the treated textiles, has been verified. The prepared specimens were characterized in terms of mechanical behavior (tensile, tear and abrasion resistance) and water resistance (surface wettability and hydrostatic pressure throughout the treated textiles). The experimental results suggest an incremental improvement of the tensile features for all the investigated specimens. For tear strength, no augmentation compared to that of the neat textile, could be verified as a consequence of polyurethane treatment. Remarkable improvements of abrasion resistance were displayed for all the impregnated PP textiles. Benefits in water resistance could be attributed to the presence of hydrophobic PU in the textile weaving of the PP samples. The ultimate improvement in water resistance was dependent on drying conditions.
Collapse
Affiliation(s)
- Antonella Patti
- Department of Civil Engineering and Architecture (DICAr), University of Catania, Viale Andrea Doria 6, 95125 Catania, Italy
- Correspondence: (A.P.); (D.A.)
| | - Francesco Costa
- Kuvera Spa, Interporto di Nola-Lotto H, 80035 Naples, Italy; (F.C.); (M.P.); (D.B.)
| | - Marta Perrotti
- Kuvera Spa, Interporto di Nola-Lotto H, 80035 Naples, Italy; (F.C.); (M.P.); (D.B.)
| | - Domenico Barbarino
- Kuvera Spa, Interporto di Nola-Lotto H, 80035 Naples, Italy; (F.C.); (M.P.); (D.B.)
| | - Domenico Acierno
- CRdC Nuove Tecnologie per le Attività Produttive Scarl, Via Nuova Agnano 11, 80125 Naples, Italy
- Correspondence: (A.P.); (D.A.)
| |
Collapse
|
50
|
Nassar HM, Hara AT. Effect of dentifrice slurry abrasivity and erosive challenge on simulated non-carious cervical lesions development in vitro. J Oral Sci 2021; 63:191-194. [PMID: 33790090 DOI: 10.2334/josnusd.20-0478] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/01/2022]
Abstract
PURPOSE To investigate the effect of slurry abrasive levels and acidic challenges on the development of non-carious cervical lesions. METHODS Ninety-six extracted upper premolars were affixed in pairs to acrylic blocks and had their root surfaces covered by acrylic resin except for 2 mm from the cemento-enamel junction. The specimens were distributed into six groups (n = 8 pairs) based on two experimental factors: (1) slurry abrasivity level [low/medium/high] and (2) citric acid challenge [yes/no]. Specimens were brushed for 5,000, 15,000, 35,000, and 65,000 strokes. Volume loss (VL) was determined based on optical profilometry scans of specimens impressions at the baseline and at subsequent brushing levels. Data were analyzed using repeated measures analysis of variance and Bonferroni pairwise comparison (α = 0.05). RESULTS Higher VL values were associated with high-abrasivity slurries relative to low- and medium-abrasivity slurries (P < 0.001). Increasing the slurry abrasivity level increased the VL regardless of the acidic challenge, which did not have a significant effect (P = 0.184). After 65,000 strokes, significant VL was recorded in all groups relative to preceding brushing levels (P < 0.001). CONCLUSION Higher values of time-dependent surface loss were associated with increased dentifrice slurry abrasivity, regardless of the citric acid challenge.
Collapse
Affiliation(s)
- Hani M Nassar
- Department of Restorative Dentistry, Faculty of Dentistry, King Abdulaziz University
| | - Anderson T Hara
- Department of Cariology, Operative Dentistry, and Dental Public Health, School of Dentistry, Indiana University, Oral Health Research Institute
| |
Collapse
|