Reduction of molecular oxygen in flavodiiron proteins - Catalytic mechanism and comparison to heme-copper oxidases

The family of flavodiiron proteins (FDPs) plays an important role in the scavenging and detoxification of both molecular oxygen and nitric oxide. Using electrons from a flavin mononucleotide cofactor molecular oxygen is reduced to water and nitric oxide is reduced to nitrous oxide and water. While the mechanism for NO reduction in FDPs has been studied extensively, there is very little information available about O2 reduction. Here we use hybrid density functional theory (DFT) to study the mechanism for O2 reduction in FDPs. An important finding is that a proton coupled reduction is needed after the O2 molecule has bound to the diferrous diiron active site and before the OO bond can be cleaved. This is in contrast to the mechanism for NO reduction, where both NN bond formation and NO bond cleavage occurs from the same starting structure without any further reduction, according to both experimental and computational results. This computational result for the O2 reduction mechanism should be possible to evaluate experimentally. Another difference between the two substrates is that the actual OO bond cleavage barrier is low, and not involved in rate-limiting the reduction process, while the barrier connected with bond cleavage/formation in the NO reduction process is of similar height as the rate-limiting steps. We suggest that these results may be part of the explanation for the generally higher activity for O2 reduction as compared to NO reduction in most FDPs. Comparisons are also made to the O2 reduction reaction in the family of heme‑copper oxidases.

Strategies for Achieving Ultra-Long ORR Durability-Rh Activates Interatomic Interactions in Alloys

The stability of platinum-based alloy catalysts is crucial for the future development of proton exchange membrane fuel cells, considering the potential dissolution of transition metals under complex operating conditions. Here, we report on a Rh-doped Pt3Co alloy that exhibits strong interatomic interactions, thereby enhancing the durability of fuel cells. The Rh-Pt3Co/C catalyst demonstrates exceptional catalytic activity for oxygen reduction reactions (ORR) (1.31 A mgPt -1 at 0.9 V vs. the reversible hydrogen electrode (RHE) and maintaining 92 % of its mass activity after 170,000 potential cycles). Long-term testing has shown direct inhibition of Co dissolution in Rh-Pt3Co/C. Furthermore, tests on proton exchange membrane fuel cells (PEMFC) have shown excellent performance and long-term durability with low Pt loading. After 50,000 cycles, there was no voltage loss at 0.8 A cm-2 for Rh-Pt3Co/C, while Pt3Co/C experienced a loss of 200 mV. Theoretical calculations suggest that introducing transition metal atoms through doping creates a stronger compressive strain, which in turn leads to increased catalytic activity. Additionally, Rh doping increases the energy barrier for Co diffusion in the bulk phase, while also raising the vacancy formation energy of the surface Pt. This ensures the long-term stability of the alloy over the course of the cycle.

Directional manipulation of electron transfer in copper/nitrogen doped carbon by Schottky barrier for efficient anodic hydrazine oxidation and cathodic oxygen reduction

Development of bifunctional hydrazine oxidation and oxygen reduction electrocatalysts with high activity and stability is of great significance for the implementation of direct hydrazine fuel cells. Combining zero-dimensional metal nanoparticles with three-dimensional nitrogen-doped carbon nanosheets is an attractive strategy for balancing performance and cost. However, the precise construction of these composites remains a significant challenge, and thorough study of their interaction mechanisms is lacking. Herein, the CuNPs/CuSA-NPCF catalyst was constructed by anchoring copper nanoparticles on a three-dimensional nitrogen-doped porous carbon nanosheet framework through coordination of polyvinyl pyrrolidone and copper ions. The Schottky barrier of metal-semiconductor matched the Fermi level of the rectifying contact, thus enabling directional electron transfer. The resulting electron-deficient Cu nanoparticles surface exhibited Lewis acidity, which was beneficial to adsorption of hydrazine molecule. While the electron-enriched Cu-N4/carbon surface improved the adsorption of oxygen molecule, and accelerated electron supply from Cu-N4 active sites to various oxygen intermediates. The CuNPs/CuSA-NPCF Mott-Schottky catalyst exhibited excellent catalytic activity for hydrazine oxidation reaction and oxygen reduction reaction in an alkaline media. The directional manipulation of electron transfer in heterogeneous materials was an attractive universal synthesis method, providing new approach for the preparation of efficient and stable hydrazine fuel cell catalysts.

Structural and Functional Analyses of the Flavoprotein Disulfide Reductase FN0820 of Fusobacterium nucleatum

Escherichia coli RclA and Staphylococcus aureus MerA are part of the Group I flavoprotein disulfide reductase (FDR) family and have been implicated in the contribution to bacterial pathogenesis by defending against the host immune response. Fusobacterium nucleatum is a pathogenic, anaerobic Gram-negative bacterial species commonly found in the human oral cavity and gastrointestinal tract. In this study, we discovered that the F. nucleatum protein FN0820, belonging to the Group I FDR family, exhibited a higher activity of a Cu2+-dependent NADH oxidase than E. coli RclA. Moreover, FN0820 decreased the dissolved oxygen level in the solution with higher NADH oxidase activity. We found that L-tryptophan and its analog 5-hydroxytryptophan inhibit the FN0820 activities of NADH oxidase and the concomitant reduction of oxygen. Our results have implications for developing new treatment strategies against pathogens that defend the host immune response with Group I FDRs.

Engineering of heterointerface of ultrathin carbon nanosheet-supported CoN/MnO enhances oxygen electrocatalysis for rechargeable Zn-air batteries

Designing bifunctional electrocatalysts with outstanding reactivity and durability towards the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) has remained a long-term aim for metal-air batteries. Achieving the high level of fusion between two distinct metal components to form bifunctional catalysts with optimized heterointerfaces and well-defined morphology holds noteworthy implications in the enhancement of electrocatalytic activity yet challenging. Herein, the fabrication of numerous heterointerfaces of CoN/MnO is successfully realized within ultrathin carbon nanosheets via a feasible self-templating synthesis strategy. Experimental results and theoretic calculations verify that the interfacial electron transfer from CoN to MnO at the heterointerface engenders an ameliorated charge transfer velocity, finely tuned energy barriers concerning reaction intermediates and ultimately accelerated reaction kinetics. The as-prepared CoN/MnO@NC demonstrates exceptional bifunctional catalytic performance, excelling in both OER and ORR showcasing a low reversible overpotential of 0.69 V. Furthermore, rechargeable liquid and quasi-solid-state flexible Zn-air batteries employing CoN/MnO@NC as the air-cathode deliver remarkable endurance and elevated power density, registering values of 153 and 116 mW cm-2 respectively and exceeding Pt/C + RuO2 counterparts and those reported in literature. Deeply exploring the effect of electron-accumulated heterointerfaces on catalytic activity would contribute wisdom to the development of bifunctional electrocatalysts for rechargeable metal-air batteries.

Immobilization of iron phthalocyanine on MOF-derived N-doped carbon for promoting oxygen reduction in zinc-air battery

Functional carbon nanomaterials play a crucial role in the cathodic oxygen reduction reaction (ORR) for sustainable fuel cells and metal-air batteries. In this study, we propose an effective approach to immobilize iron phthalocyanines (FePc) by employing a porous N-doped carbon material, denoted as NC-1000, derived from a sheet-shaped coordination polymer. The resulting NC-1000 possesses substantial porosity and abundant pore defects. The nitrogen sites within NC-1000 not only facilitate FePc adsorption but also optimize the electron distribution at the Fe-N site. The FePc@NC-1000 composite material exhibits a significant number of active centers in the form of Fe-N4 moieties, showcasing satisfactory ORR activity. Specifically, it demonstrates an onset potential of 0.99 V, a positive half-wave potential of 0.86 V, a large limiting current of 5.96 mA cm-2, and a small Tafel slope of 44.41 mV dec-1. Additionally, theoretical calculations and experimental results confirm the favorable performance and durability of zinc-air batteries assembled using FePc@NC-1000, thereby highlighting their considerable potential for practical applications. Overall, this study provides a comprehensive exploration of the enhanced catalytic performance and increased stability of metal-organic framework-derived functional carbon nanomaterials as cost-effective, efficient, and stable catalysts for the ORR.

Boosting oxygen reduction reaction kinetics through perturbating electronic structure of single-atom Fe-N3S1 catalyst with sub-nano FeS cluster

Single atomic Fe-N4 catalyst exhibits a great prospect for oxygen reduction reaction (ORR) and adjusting the intrinsic coordination structure and the carbon matrix structure effectively improves the catalytic activity. However, controlling the active site coordination structure and its surrounding environment at atomic level remains a challenge. In this paper, Fe-N3S1 and FeS sub-nano cluster were innovatively concatenated on S, N co-doped carbon matrix (SNC), denoted as FeS/FeSA@SNC catalysts, for modulating ORR catalysis performance. Both experimental measurements and theoretical calculations have confirmed that the local electron configuration of Fe center is modulated by this unique structure combination leading to optimized ORR kinetics. Based on this design, the synthesized FeS/FeSA@SNC delivers ORR activity with a half-wave potential of 0.9 V (vs. RHE), excelling that of commercial Pt/C (0.87 V) and the Zn-air battery (ZAB) with this cathode catalyst delivers a peak power density of 126 mW cm-2. This work presents a novel strategy for manipulating the single-atom active sites through control the local coordination structure and provides a reference for the development of novel efficient ORR electrocatalysts.

Designing Oxide Catalysts for Oxygen Electrocatalysis: Insights from Mechanism to Application

The electrochemical oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are fundamental processes in a range of energy conversion devices such as fuel cells and metal-air batteries. ORR and OER both have significant activation barriers, which severely limit the overall performance of energy conversion devices that utilize ORR/OER. Meanwhile, ORR is another very important electrochemical reaction involving oxygen that has been widely investigated. ORR occurs in aqueous solutions via two pathways: the direct 4-electron reduction or 2-electron reduction pathways from O2 to water (H2O) or from O2 to hydrogen peroxide (H2O2). Noble metal electrocatalysts are often used to catalyze OER and ORR, despite the fact that noble metal electrocatalysts have certain intrinsic limitations, such as low storage. Thus, it is urgent to develop more active and stable low-cost electrocatalysts, especially for severe environments (e.g., acidic media). Theoretically, an ideal oxygen electrocatalyst should provide adequate binding to oxygen species. Transition metals not belonging to the platinum group metal-based oxides are a low-cost substance that could give a d orbital for oxygen species binding. As a result, transition metal oxides are regarded as a substitute for typical precious metal oxygen electrocatalysts. However, the development of oxide catalysts for oxygen reduction and oxygen evolution reactions still faces significant challenges, e.g., catalytic activity, stability, cost, and reaction mechanism. We discuss the fundamental principles underlying the design of oxide catalysts, including the influence of crystal structure, and electronic structure on their performance. We also discuss the challenges associated with developing oxide catalysts and the potential strategies to overcome these challenges.

A novel flow-through dual-system electro-Fenton for boosting PAEs removal efficiency in natural waters

In a conventional electro-Fenton system with a single cathode, it is difficult to attain both high H2O2 generation by oxygen reduction reaction (ORR) and efficient iron reduction reaction (FRR). For this study, a flow-through dual-system electro-Fenton (FT-DEF) reactor was designed to overcome this shortcoming and promote mass transfer to effectively remove dimethyl phthalate (DMP) from water. By comparing the ORR and FRR performances of four different commercial carbon electrodes, the graphite felt with the highest amount of H2O2 generation was selected as the cathode of the ORR system, and the activated carbon fiber with the best Fe (III) reduction effect was selected as another cathode of the FRR system. The ORR system and FRR system operate simultaneously to form the DEF system. The FT-DEF system displayed many advantages compared with the conventional electro-Fenton (CI-ORR), presenting an improved efficiency and low energy consumption in phthalates removal. Under optimal reaction conditions, the FT-DEF system is capable to degrade 100% DMP in 20 min, which is 25% higher than the CI-ORR, while the reaction rate constant (0.271 min-1) is 16 times that of CI-ORR system (0.017min-1). In addition, the TOC removal of FT-DEF achieving 72.3% within 2 h with energy consumption of 2.35 kW h·m-3 is much better than CI-ORR that only achieves 18.3% TOC removal within 2 h with energy consumption of 8.13 kW h·m-3. Furthermore, control parameters and mechanism of FT-DEF were investigated in detail. The main intermediate products of DMP were analyzed by UPLC-ESI-HRMS, and the possible degradation path of DMP was speculated. In addition, application of FT-DEF in three types of natural water demonstrated its universal applicability of the system.

PtNi-W/C with Atomically Dispersed Tungsten Sites Toward Boosted ORR in Proton Exchange Membrane Fuel Cell Devices

The performance of proton exchange membrane fuel cells is heavily dependent on the microstructure of electrode catalyst especially at low catalyst loadings. This work shows a hybrid electrocatalyst consisting of PtNi-W alloy nanocrystals loaded on carbon surface with atomically dispersed W sites by a two-step straightforward method. Single-atomic W can be found on the carbon surface, which can form protonic acid sites and establish an extended proton transport network at the catalyst surface. When implemented in membrane electrode assembly as cathode at ultra-low loading of 0.05 mgPt cm-2, the peak power density of the cell is enhanced by 64.4% compared to that with the commercial Pt/C catalyst. The theoretical calculation suggests that the single-atomic W possesses a favorable energetics toward the formation of *OOH whereby the intermediates can be efficiently converted and further reduced to water, revealing a interfacial cascade catalysis facilitated by the single-atomic W. This work highlights a novel functional hybrid electrocatalyst design from the atomic level that enables to solve the bottle-neck issues at device level.

Regulated High-Spin State and Constrained Charge Behavior of Active Cobalt Sites in Covalent Organic Frameworks for Promoting Electrocatalytic Oxygen Reduction

A novel type of covalent organic frameworks has been developed by assembling definite cobalt-nitrogen-carbon configurations onto carbon nanotubes using linkers that have varying electronic effects. This innovative approach has resulted in an efficient electrocatalyst for oxygen reduction, which is understood by a combination of in situ spectroelectrochemistry and the bond order theorem. The strong interaction between the electron-donating carbon nanotubes and the electron-accepting linker mitigates the trend of charge loss at cobalt sites, while inducing the generation of high spin state. This enhances the adsorption strength and electron transfer between the cobalt center and reactants/intermediates, leading to an improved oxygen reduction capability. This work not only presents an effective strategy for developing efficient non-noble metal electrocatalysts through reticular chemistry, but also provides valuable insights into regulating the electronic configuration and charge behavior of active sites in designing high-performance electrocatalysts.

Regulation of Atomic Fe-Spin State by Crystal Field and Magnetic Field for Enhanced Oxygen Electrocatalysis in Rechargeable Zinc-Air Batteries

Highly-active and low-cost bifunctional electrocatalysts for oxygen reduction and evolution are essential in rechargeable metal-air batteries, and single atom catalysts with Fe-N-C are promising candidates. However, the activity still needs to be boosted, and the origination of spin-related oxygen catalytic performance is still uncertain. Herein, an effective strategy to regulate local spin state of Fe-N-C through manipulating crystal field and magnetic field is proposed. The spin state of atomic Fe can be regulated from low spin to intermediate spin and to high spin. The cavitation of dxz and dyz orbitals of high spin Fe(Ⅲ) can optimize the O2 adsorption and promote the rate-determining step (*O2 to *OOH). Benefiting from these merits, the high spin Fe-N-C electrocatalyst displays the highest oxygen electrocatalytic activities. Furthermore, the high spin Fe-N-C-based rechargeable zinc-air battery displays a high power density of 170 mW cm-2 and good stability.

Uncovering Dynamic Edge-Sites in Atomic Co-N-C Electrocatalyst for Selective Hydrogen Peroxide Production

Understanding of the nature of single-atom catalytic sites and identification of their spectroscopic fingerprints are essential prerequisites for the rational design of target catalysts. Here, we apply correlated in situ X-ray absorption and infrared spectroscopy to probe the edge-site-specific chemistry of Co-N-C electrocatalyst during the oxygen reduction reaction (ORR) operation. The unique edge-hosted architecture affords single-atom Co site remarkable structural flexibility with adapted dynamic oxo adsorption and valence state shuttling between Co(2-δ)+ and Co2+, in contrast to the rigid in-plane embedded Co1-Nx counterpart. Theoretical calculations demonstrate that the synergistic interplay of in-situ reconstructed Co1-N2-oxo with peripheral oxygen groups gives rise to a near-optimal adsorption of *OOH intermediate and substantially increases the activation barrier for its dissociation, accounting for a robust acidic ORR activity and 2e- selectivity for H2O2 production.

One-pot synthesis of ultrafine trimetallic PtPdCu alloy nanoparticles decorated on carbon nanotubes for bifunctional catalysis of ethanol oxidation and oxygen reduction

Bifunctional catalysts for ethanol oxidation reaction (EOR) and oxygen reduction reaction (ORR) with high noble-metal utilization are highly beneficial to direct ethanol fuel cells (DEFCs). This study developed a ternary bifunctional catalyst composed of ultrafine PtPdCu alloy nanoparticles and carbon nanotubes (CNTs) support through a facile surfactant-free solvothermal route. The carboxyl terminal groups on CNTs ensure the confined growth of PtPdCu alloys (∼5 nm) and suppress Ostwald ripening of metallic active sites during electrochemical cycling. Consequently, PtPdCu/CNTs exhibits high mass activity (1.95 A mg^-1) and specific activity (4.08 mA cm^-2) toward EOR, which are 7.8 and 8.9 times higher, respectively, than those of commercial Pt/C. Furthermore, PtPdCu/CNTs displays superior stability toward EOR compared with its bimetallic counterparts (PtPd/CNTs and PtCu/CNTs). In addition, PtPdCu/CNTs exhibits the highest half-wave potential of 0.888 V among all electrocatalysts, indicating high ORR activity. Density functional theory calculations reveal that Pd and Cu mediate the electronic structure of Pt, leading to enhanced catalytic activity of PtPdCu/CNTs. The excellent catalytic property of PtPdCu/CNTs can also be attributed to the bifunctional effects of Pd/Cu and the interaction between metal and the carbon support. The proposed material is a contribution to the family of efficient ternary-alloy electrocatalysts for fuel cells.

pH-dependent kinetics of NO release from E. coli bd-I and bd-II oxidase reveals involvement of Asp/Glu58B

Escherichia coli contains two cytochrome bd oxidases, bd-I and bd-II. The structure of both enzymes is highly similar, but they exhibit subtle differences such as the accessibility of the active site through a putative proton channel. Here, we demonstrate that the duroquinol:dioxygen oxidoreductase activity of bd-I increased with alkaline pH, whereas bd-II showed a broad activity maximum around pH 7. Likewise, the pH dependence of NO release from the reduced active site, an essential property of bd oxidases, differed between the two oxidases as detected by UV/vis spectroscopy. Both findings may be attributed to differences in the proton channel leading to the active site heme d. The channel comprises a titratable residue (Asp58^B in bd-I and Glu58^B in bd-II). Conservative mutations at this position drastically altered NO release demonstrating its contribution to the process.

High-performance atomic Co/N co-doped porous carbon catalysts derived from Co-doped metal-organic frameworks for oxygen reduction

Improving the activity and durability of carbon-based catalysts is a key challenge for their application in fuel cells. Herein, we report a highly active and durable Co/N co-doped carbon (CoNC) catalyst prepared via pyrolysis of Co-doped zeolitic-imidazolate framework-8 (ZIF-8), which was synthesized by controlling the feeding sequence to enable Co to replace Zn in the metal-organic framework (MOF). The catalyst exhibited excellent oxygen reduction reaction (ORR) performance, while the half-wave potential decreased by only 8 mV after 5,000 accelerated stress test (AST) cycles in an acidic solution. Furthermore, the catalyst exhibited satisfactory cathodic catalytic performance when utilized in a hydrogen/oxygen single proton exchange membrane (PEM) fuel cell and a Zn-air battery, yielding maximum power densities of 530 and 164 mW cm^-2, respectively. X-ray absorption spectroscopy (XAS) and high-angle annular dark field-scanning transmission electron microscopy (HAAD-STEM) analyses revealed that Co was present in the catalyst as single atoms coordinated with N to form Co-N moieties, which results in the high catalytic performance. These results show that the reported catalyst is a promising material for inclusion into future fuel cell designs.

Conductivity-enhanced porous N/P co-doped metal-free carbon significantly enhances oxygen reduction kinetics for aqueous/flexible zinc-air batteries

Heteroatom-doped metal-free carbon catalysts for oxygen reduction reactions have gained significant attention because of their unusual activity and economic cost. Here, a novel N/P co-doped porous carbon catalyst (NPPC) with a high surface area for oxygen reduction reaction (ORR) is constructed by a facile high-temperature calcination method employing ZIF-8 as the precursor and red phosphorus as the phosphorus source. In particular, ZIF-8 is firstly calcined to obtain N-doped carbon (NC) followed by further calcination with red phosphorus to obtain NPPC. Ultraviolet photoelectron spectroscopy (UPS) analysis shows that the ultra-low amount of P doping could significantly decrease the work function from 4.32 to 3.86 eV. The resultant catalyst exhibits a promising electrocatalytic activity with a half-wave potential (E_1/2) of 0.87 V and a limiting current density (J_L) of 5.15 mA cm^-2. Besides, it also shows improved catalytic efficiency and excellent durability with a negligible decay of J_L after 2000 CV cycles. Moreover, aqueous and solid-state flexible zinc-air batteries (ZAB) using the catalyst show a promising application potential. This work provides new insight into developing P/N-doped metal-free carbon ORR catalysts.

Efficient photocatalytic hydrogen peroxide production induced by the strong internal electric field of all-organic S-scheme heterojunction

Light-driven reaction of oxygen and water to hydrogen peroxide (H₂O₂) is an environmental protection method, which can convert solar energy into green products. In this work, perylene-3, 4, 9, 10-tetracarboxylic diimide (PDINH) could be recrystallized in situ on the surface of porous carbon nitride (PCN), to obtain an all-organic S-scheme heterojunction (PDINH/PCN). The design of the hierarchical porous photocatalyst improved the mass transfer, enhanced the light absorption and increased specific surface area. Moreover, the construction of the S-scheme heterojunction at the interface of PDINH and PCN exhibited suitable band, which facilitated the separation and transfer of carriers. The H₂O₂ production rate was up to 922.4 μmol g^-1h^-1, which was 2.6 and 53.3 times higher than that of PCN and PDINH. Therefore, the all-organic S-scheme heterojunction provides an insight for improving the photocatalytic H₂O₂ production.

Wiring of bilirubin oxidases with redox polymers on gas diffusion electrodes for increased stability of self-powered biofuel cells-based glucose sensing

A new redox polymer/bilirubin oxidase (BOD)-based gas diffusion electrode was designed to be implemented as the non-current and non-stability limiting biocathode in a glucose/O₂ biofuel cell that acts as a self-powered glucose biosensor. For the proof-of-concept, a bioanode comprising the Os-complex modified redox polymer P(VI-co-AA)-[Os(bpy)₂Cl]Cl and FAD-dependent glucose dehydrogenase to oxidize the analyte was used. In order to develop an optimal O₂-reducing biocathode for the biofuel cell Mv-BOD as well as Bp-BOD and Mo-BOD have been tested in gas diffusion electrodes in direct electron transfer as well as in mediated electron transfer immobilized in the Os-complex modified redox polymer P(VI-co-AA)-[Os(diCl-bpy)₂]Cl₂. The resulting biofuel cell exhibits a glucose-dependent current and power output in the concentration region between 1 and 10 mM. To create a more realistic test environment, the performance and long-term stability of the biofuel cell-based self-powered glucose biosensor has been investigated in a flow-through cell design.

Effects of water constituents on the stability of gas diffusion electrode during electrochemical hydrogen peroxide production for water and wastewater treatment

Electrochemically producing hydrogen peroxide (H₂O₂) from oxygen reduction reaction (ORR) with natural air diffusion electrode (NADE) is an attractive way to supply H₂O₂ for decentralized water treatment. In this study, the stability of NADE during H₂O₂ electroproduction in varying water matrices were evaluated, including synthetic electrolyte solutions (0.05 M Na₂SO₄) with or without calcium ions (Ca²⁺, 200 mg/L) and/or humic acid (HA, 40 mg/L), as well as a selected municipal wastewater (92.7 mg/L Ca²⁺, 3.6 mg/L Mg²⁺, and 23.9 mg/L total organic carbon). The results show that NADEs maintained a good stability during H₂O₂ electroproduction in Na₂SO₄ solutions regardless of the presence of HA. However, Ca²⁺ (and Mg²⁺) could form significant amounts of mineral precipitates on the surface and in the internal pores of NADEs during H₂O₂ electroproduction. These mineral precipitates can negatively influence H₂O₂ production by impeding the oxygen, electron, and proton transfer processes involved in ORR to H₂O₂. Moreover, the mineral precipitates shifted the NADEs from hydrophobic to hydrophilic, which may promote H₂O₂ reduction to H₂O at the NADEs. Consequently, the apparent current efficiencies of H₂O₂ production decreased substantially from initially ∼90% to 50%-70% as the NADEs were continuously used for 60 h in the Ca-containing solutions and selected wastewater. These results indicate that water constituents that are commonly present in real water matrices, especially Ca²⁺, can cause serious deterioration of NADE stability during H₂O₂ electroproduction. Therefore, proper strategies are needed to mitigate electrode fouling during H₂O₂ electroproduction with NADEs in practical water and wastewater treatment.

Designing Thiophene-Enriched Fully Conjugated 3D Covalent Organic Framework as Metal-Free Oxygen Reduction Catalyst for Hydrogen Fuel Cells

The application of three-dimensional (3D) covalent organic frameworks (COFs) in renewable energy fields is greatly limited due to their non-conjugated skeletons. Here, we design and successfully synthesize a thiophene-enriched fully conjugated 3D COF (BUCT-COF-11) through an all-thiophene-linked saddle-shaped building block (COThTh-CHO). The BUCT-COF-11 exhibits excellent semiconducting property with intrinsic metal-free oxygen reduction reaction (ORR) activity. Using the COF as cathode catalyst, the assembled anion-exchange membrane fuel cells (AEMFCs) exhibited a high peak power density up to 493 mW cm^-2 . DFT calculations reveal that thiophene introduction in the COF not only improves the conductivity but also optimizes the electronic structure of the sample, which therefore boosts the ORR performance. This is the first report on the application of COFs as metal-free catalysts in fuel cells, demonstrating the great potential of fully conjugated 3D COFs as promising semiconductors in energy fields.

Anthraquinone acted as a catalyst for the removal of triphenylmethane dye containing tertiary amino group: Characteristics and mechanism

Herein, we found that anthraquinone (AQ) acted as a catalyst for the rapid and effective removal of triphenylmethane dye containing tertiary amino group (TDAG). Results showed that AQ had an enhanced catalytic reactivity towards the removal of TDAG compared to hydro-quinone, which was further proved and explained using density functional theory (DFT) calculations. AQs could achieve a TDAG removal efficiency and rate of approximately 100% and 0.3583 min^-1, respectively, within 20 min. Quenching experiments and electron paramagnetic resonance (EPR) tests indicated that the superoxide radical (O₂^•-) generated through the catalytic reduction of an oxygen molecule (O₂) by AQ contributed to the effective removal of the TDAG. In addition, it was found that the electrophilic attack of the O₂^•- radical on the TDAG was the driving force for the dye degradation process. Decreasing the pH led to protonation of the substituted group of AG, which resulted in formation of an electron deficient center in the TDAG molecule (TDAG-EDC⁺) through delocalization of the π electron. Therefore, the possibility of the electrophilic attack for the dye by the negative O₂^•- radical was significantly enhanced. This study revealed that the H⁺ and the O₂^•- generated by the catalytic reduction of O₂ have synergistic effects that led to a significant increase in the dye removal rate and efficiency, which were higher than those obtained through persulfate oxidation.

ZIF-8-derived N-doped porous carbon wrapped in porous carbon films as an air cathode for flexible solid-state Zn-air batteries

Metal-organic frameworks are a new type of catalyst precursor with high specific surface area and controllable composition, which can be modified by post-treatment and are suitable for use as cathode catalysts for Zn-air batteries (ZABs). Here, a self-doped nitrogen nanocatalyst (N-PC@CF) with a double-layered porous structure is rationally designed for flexible solid-state ZABs. The outer porous carbon shell of the N-PC@CF is highly hydrophilic and O₂ permeable, while the layered porous structure exposes sufficient active sites to shorten the mass transfer distance, which would promote electrocatalytic performance and increase flexibility efficiently. The obtained N-PC@CF has an onset potential of 0.926 V and a half-wave potential of 0.843 V in the oxygen reduction reaction test, which is equivalent to commercial Pt/C. Most importantly, the maximum power density of the assembled ZAB is 134.7 mW cm^-2 and it exhibits a specific capacity of 776.8 mA h g^-1 at 10 mA cm^-2, which is better than the 99.9 mW cm^-2 of the Pt/C-based battery. An obvious improvement in the constant current discharge-charge cycle durability of the ZAB is found when compared with Pt/C. The specific capacities of ZAB with N-PC@CF as the air cathode at 5, 10 and 15 mA cm^-2 are 842.7, 776.8 and 715.0 mAh g^-1 (calculated by the mass of zinc consumed), respectively, corresponding to high energy densities of 1089.7, 977.3 and 842.2 Wh kg^-1. A flexible solid-state battery is assembled with excellent flexibility and stability, even if the battery is folded into a large angle (160°). This work provides a new strategy for the design and synthesis of metal-free air cathodes.

Inhibition of direct-electron-transfer-type bioelectrocatalysis of bilirubin oxidase by silver ions

In enzyme-based biosensors, Ag⁺ eluted from the reference electrode inhibits the enzyme activity. Herein, to suppress the inhibition of bilirubin oxidase (BOD) by Ag⁺, kinetic analysis was used to examine the effect of Ag⁺ on the activity of BOD. It was confirmed that the addition of Ag⁺ decreased the bioelectrocatalytic activity of BOD. Atomic absorption spectroscopy (AAS) suggested that Ag⁺ was attached to BOD. Moreover, the changes in the visible absorption spectra after Ag⁺ addition showed that Ag⁺ was bound to the type I Cu sites in BOD. During oxygen reduction by BOD, the direct-electron-transfer-type bioelectrocatalytic current decreased after Ag⁺ was added. The decay of the catalytic current was evaluated using kinetic analysis (assuming a pseudo-first-order reaction). Based on the analysis, the inhibition of BOD was suppressed when the Ag⁺ concentration was below 0.1 µM. Referring to the solubility product of AgCl, Cl^- at a concentration of 1 mM suppressed the inhibition of the enzymatic activity by 95%.

Host-guest interactions promoted formation of Fe-N4 active site toward efficient oxygen reduction reaction catalysis

FeNC is the most promising material to replace the noble metal catalyst for cathodic oxygen reduction reaction in proton exchange membrane fuel cells (PEMFCs). However, the practical performance of FeNC catalyst is significantly limited by its low active site (Fe-N₄) density. Herein, we propose to promote the formation of Fe-N₄ active sites in FeNC catalyst by strengthening the interaction of N precursors and Fe precursors during the carbonization synthesis. In our approach, ionic liquid (IL, [EMIM][NTf₂]) with high nitrogen content and good thermal stability is caged in the pores of Fe-ZIF-8 through the host-guest interactions. These interactions are critical for the preservation of Fe and N species and formation of active sites during the synthesis. The optimal catalyst developed with this approach (Fe_0.05NC/10) has a high density of accessible Fe-N₄ sites (1.88*10¹⁹ sites g^-1). Therefore, in both acidic and alkaline media, Fe_0.05NC/10 showed excellent ORR activity comparable to commercial Pt/C catalyst. Moreover, PEMFC performance with a peak power density of 300 mW cm^-2 was demonstrated with Fe_0.05NC/10 under H₂/O₂ conditions. The synthetic approach reported herein may be used for tailoring of advanced catalyst with high intrinsic activity.

Engineering cobalt nitride nanosheet arrays with rich nitrogen defects as a bifunctional robust oxygen electrocatalyst in rechargeable Zn-air batteries

Developing high-activity bifunctional oxygen electrocatalysts to overcome the sluggish 4e^- kinetics is an urgent challenge for rechargeable metal-air batteries. Here, we prepared a CoN nanosheet catalyst with rich nitrogen defects (CoN-N_d) through solvothermal and low-temperature nitridation. Notably, the study finds for the first time that only Co LDH materials can be mostly converted to CoN-N_d under the same nitriding conditions relative to different Co-based precursors. Experiments indicate that the constructed CoN-N_d catalyst exhibits preeminent electrocatalytic activities for both oxygen evolution reaction (η₁₀ = 243 mV) and oxygen reduction reaction (J_L = 5.2 mA cm^-2). Moreover, the CoN-N_d-based Zinc-air battery showed a large power density of 120 mW cm^-2 and robust stability over 260 cycles, superior to the state-of-art Pt/C + RuO₂. The superior performance is attributed to a large number of defects formed by the disordered arrangement of local atoms on the catalyst that facilitate the formation of more active sites, and alternate array-like structures thereof improving electrolyte diffusion and gas emission.

Scalable Molten Salt Synthesis of Platinum Alloys Planted in Metal-Nitrogen-Graphene for Efficient Oxygen Reduction

Fuel cells are considered as a promising alternative to the existing traditional energy systems towards a sustainable future. Nevertheless, the synthesis of efficient and robust platinum (Pt) based catalysts remains a challenge for practical applications. In this work, we present a simple and scalable molten-salt synthesis method for producing a low-platinum (Pt) nanoalloy implanted in metal-nitrogen-graphene. The as-prepared low-Pt alloyed graphene exhibits a high oxygen reduction activity of 1.29 A mg_Pt ^-1 and excellent durability over 30 000 potential cycles. The catalyst nanoarchitecture of graphene encased Pt nanoalloy provides a robust capability against nanoparticle migration and corrosion due to a strong metal-support interaction. Similarly, advanced characterization and theoretical calculations show that the multiple active sites in platinum alloyed graphene synergistically account for the improved oxygen reduction. This work not only provides an efficient and robust low-Pt catalyst but also a facile design idea and scalable preparation technique for integrated catalysts to achieve more profound applications in fuel cells and beyond.

Highly active iron-nitrogen-boron-carbon bifunctional electrocatalytic platform for hydrogen peroxide sensing and oxygen reduction

An iron-nitrogen-boron-carbon (Fe-N-B-C) bifunctional electrocatalyst was prepared by means of a facile one-step hydrothermal reduction of graphene oxide using dimethylamine borane as doping agent. In addition, hemins were efficiently anchored during doping/reducing process on this modified graphene. The as-prepared Fe-N-B-C electro-catalyst showed enhanced response as regards its potential for reduction of H₂O₂ and O₂. In view of its catalytic activity, this Fe-N-B-C material was tested for the determination of H₂O₂ with a chronoamperometry method, obtaining a detection limit as low as 0.055 μM, which is better than that of some Hemin-N-C materials. Regarding O₂ reduction reaction, a study performed using a rotating disk electrode indicated that this material exhibits a positive onset potential (0.90V vs. RHE), high selectivity (4e^- process), high limiting-current density (4.75 mA cm^-2) and strong resistance against the crossover-effect from methanol in alkaline medium, making it to be the promising candidate as alternative for commercial Pt/C catalysts. These results could have commercial and environmental relevance and would deserve further complementary investigation.

Enhanced oxygen reduction and methanol oxidation reaction over self-assembled Pt-M (M = Co, Ni) nanoflowers

Herein, we introduce a facile approach to synthesize a unique class of Pt-M (M = Ni, Co) catalysts with a nanoflower structure for boosting both oxygen reduction reaction (ORR) and methanol oxidation reaction (MOR). By controlling the surface-active agents, we modified the functional groups surrounding the Pt atoms, tuned the alloying of Pt and the transition metals Ni and Co, and prepared two different kinds of nanodendrites. Their successful synthesis depends on the selection and amount of surfactants (hexadecyltrimethylammonium bromide (CTAB), Polyvinylpyrrolidone (PVP)). Besides, by controlling reaction time, we also explored the forming procedures for Pt-Co globularia nanodendrite (Pt-Co GND) and Pt-Ni petalody nanodendrite (Pt-Ni PND). Our investigation highlights the importance of complex nanoarchitecture, which enables surface and interface modification to achieve excellent catalytic performance in fuel cell electrocatalysis. The characterization of the as-prepared catalysts reveals a high electrochemical surface area and mass activity (2041 mAmg_Pt^-1and 950 mAmg_Pt^-1 for Pt-Co GND and Pt-Ni PND, respectively, for ORR). Furthermore, Pt-Co GND showed a high MOR activity, with a mass activity value recorded at 1615 mAmg_Pt^-1 which is far superior to that for Pt/C. Moreover, both catalysts retain high activity after accelerated durability tests (ADTs). The electron transfer number was calculated by performing the rotating ring-disk electrode (RRDE) measurements. Due to abundant active sites of Pt, both Pt-Co GND and Pt-Ni PND exhibit a 4e^- pathway for ORR with electron transfer number of >3.95.

Oxygen vacancy-rich N-doped carbon encapsulated BiOCl-CNTs heterostructures as robust electrocatalyst synergistically promote oxygen reduction and Zn-air batteries

The development of non-precious metal catalysts for oxygen reduction reactions (ORR) is vital for promising clean energy technologies such as fuel cells, and zinc-air batteries. Herein, we present a stepwise synthesis of N-doped and carbon encapsulated BiOCl-CNTs heterostructures. Electrocatalytic ORR studies show that the optimized catalyst has a high half-wave potential (E_1/2) of 0.85 V (vs. RHE), large limiting current density (-5.34 mA cm^-2@0.6 V) in alkaline medium, and nearly perfect 4e^- reduction characteristics, even surpassing commercial Pt/C. Meanwhile, the catalyst has exceptional durability (above 97.5 % after 40000 s) and strong resistance towards methanol poisoning. The good ORR activity also results in high-performance zinc-air batteries with a specific capacity (724 mAh g^-1@10 mA cm^-2), a high open-circuit potential of 1.51 V and a peak power density of 170.7 mW cm^-2, as well as an ultra-long charge-discharge cycle stability (155 h), comparable with the Pt/C catalyst. The catalytic mechanism reveals that the excellent electrocatalytic performance originates from the synergistic effect of N doping, oxygen vacancies, and BiOCl sites.

Ultrafast fabrication of robust electrocatalyst having Fe/Fe3C and CuNC for enhanced oxygen reduction reaction activity

The search for ultrafast and simple methods to fabricate non-noble metal catalysts to boost electrocatalytic oxygen reduction reaction (ORR) is still ongoing. Herein, we demonstrate a one-step microwave-assisted heating method to prepare copper nitride/iron/iron carbide nanoparticle hybrids (CuNC/Fe/Fe₃C/CNT). This ultrafast heating method induces plentiful carbon-wrapped metal and Fe₃C nanoparticles that are attached to the surface of CNT and scattered nanosheets. The CuNC/Fe/Fe₃C/CNT exhibit a half-wave potential (E_1/2) of 0.886 V toward the ORR in alkaline solution, with 220 mV more positive E_1/2 than that of CuNC/CNT and Fe/Fe₃C/CNT respectively. The activity of as-prepared catalysts is discussed by investigating their structures and compositions and their relationship with the ORR performance. Detailed analysis results disclose that the high activity of the CuNC/Fe/Fe₃C/CNT catalysts could be attributed to the interaction of CuNC and Fe/Fe₃C species. To be specific, as the electron donor, Fe/Fe₃C nanoparticles induce electron localization and promote the formation of Cu (δ + )-NC (0 < δ < 2), therefore leading to the improvement of the ORR performance. This work may offer an ultrafast way to construct efficient catalysts with enhanced ORR performance.

Electrocatalytic evidence of the diversity of the oxygen reaction in the bacterial bd oxidase from different organisms

Cytochrome bd oxidase is a bacterial terminal oxygen reductase that was suggested to enable adaptation to different environments and to confer resistance to stress conditions. An electrocatalytic study of the cyt bd oxidases from Escherichia coli, Corynebacterium glutamicum and Geobacillus thermodenitrificans gives evidence for a different reactivity towards oxygen. An inversion of the redox potential values of the three hemes is found when comparing the enzymes from different bacteria. This inversion can be correlated with different protonated glutamic acids as evidenced by reaction induced FTIR spectroscopy. The influence of the microenvironment of the hemes on the reactivity towards oxygen is discussed.

Enhanced oxygen reduction activity and high-quality effluent of membrane filtration electrodes with Prussian blue in microbial fuel cells

Membrane filtration electrode based microbial fuel cell provides a promising route to simultaneously recover energy and produce high-quality effluent during water treatment. Enhancing effluent quality and oxygen reduction reaction (ORR) activity of the membrane electrode still remains a major challenge. In this study, filtration types of membrane electrodes with Prussian blue (PB) doping and PVDF-PVC-PEG triblock copolymers were prepared by a simple phase inversion fabrication process. The PB-0.2 membrane electrode with optimal 0.2 wt% of PB obtained the highest current density (12.0 A m^-2) and the lowest charge transfer resistance (5.0 ± 0.1 Ω). Rotating disk electrode (RDE) results also demonstrated that the PB-0.2 catalyst exhibited the superior ORR activity with the highest number of transferred electrons (n = 3.90). Furthermore, the MFC with PB-0.2 produced the maximum power density of 1401 ± 17 mW m^-2, which was 186.5% higher than that of the control. Moreover, the filtrated effluent tCOD_eff was 20.6 ± 1.2 mg L^-1 for the PB-0.2, which was significantly reduced by 63% compared with the control. These results showed that the addition of PB was an effective strategy to enhance the overall oxygen reduction performance and improve effluent quality of microbial fuel cells.

Multi-role graphitic carbon nitride-derived highly porous iron/nitrogen co-doped carbon nanosheets for highly efficient oxygen reduction catalyst

Pyrolyzing precursors containing iron, nitrogen and carbon elements is a commonly used process for synthesizing FeNC catalysts for oxygen reduction reaction (ORR). Generally, aggregation of iron-based species is prone to occur because of a lack of chemical bonds between iron-based species and carbon matrix and synthesizing highly porous FeNC catalysts is difficult because carbon skeleton is prone to collapse during pyrolysis. Herein, highly porous FeNC catalysts with fine iron-based species are synthesized by selecting glucose as carbon source, FeCl₃ as iron source, and urea-derived g-C₃N₄ as nitrogen source, iron anchoring and stabilizing species, and pore-forming template. The multi-role g-C₃N₄-derived catalyst synthesized at 1100 °C (FeNC1100) has fine iron-based species, large specific surface area (737 m² g^-1), and extremely high pore volume (2.66 cm³ g^-1). Accordingly, FeNC1100 shows a larger half-wave potential (E_1/2 = 0.894 V), a higher stability (ΔE_1/2 = 6 mV) after 10,000 potential cycles in alkaline media, and a higher peak power density (P = 152 mW cm^-2) when employed as ORR catalyst of zinc-air battery, which are all superior to those of the commercial Pt/C catalyst (E_1/2 = 0.864 V, ΔE_1/2 = 30 mV, P = 134 mW cm^-2). The present work brings a new method for synthesizing highly porous FeNC catalysts decorated with fine active sites for ORR.

Oxygen-reducing microbial cathodes in hypersaline electrolyte

Hypersaline electrolytes offer a way to boost the development of microbial fuel cells by overcoming the issue due to the low conductivity of the usual media. Efficient halotolerant bioanodes have already been designed but O₂-reducing cathodes remain a strong bottleneck. Here, O₂-reducing biocathodes were designed by using salt marsh sediment as the inoculum and a hypersaline media (45 g/L NaCl) of high conductivity (10.4 S m^-1). Current density up to 2.2 A m^-2 was reached from potential of +0.2 V/SCE. The efficiency of the biocathodes was correlated to the presence of Gammaproteobacteria strain(s) related to Thiohalobacter thiocyanaticus, which were considerably enriched in the best performing biocathodes. This work opens up new perspectives to overcome the O₂ reduction issue in hypersaline MFCs by designing efficient halotolerant microbial cathodes and pointing out the strains that should now be focused to improve them.

Transition metal-containing nitrogen-doped nanocarbon catalysts derived from 5-methylresorcinol for anion exchange membrane fuel cell application

Highly active electrocatalysts for electrochemical oxygen reduction reaction (ORR) were prepared by high-temperature pyrolysis from 5-methylresorcinol, Co and/or Fe salts and dicyandiamide, which acts simultaneously as a precursor for reactive carbonitride template and a nitrogen source. The electrocatalytic activity of the catalysts for ORR in alkaline solution was studied using the rotating disc electrode (RDE) method. The bimetallic catalyst containing iron and cobalt (FeCoNC-at) showed excellent stability and remarkable ORR performance, comparable to that of commercial Pt/C (20 wt%). The superior activity was attributed to high surface metal and nitrogen contents. The FeCoNC-at catalyst was further tested in anion exchange membrane fuel cell (AEMFC) with poly-(hexamethyl-p-terphenylbenzimidazolium) (HMT-PMBI) membrane, where a high value of peak power density (P_max = 415 mW cm^-2) was achieved.

Scalable synthesis of Fe3N nanoparticles within N-doped carbon frameworks as efficient electrocatalysts for oxygen reduction reaction

Reasonable design and scalable preparation of low-cost, effective and durable electro-catalysts as substitutes to expensive Pt-derived catalysts for oxygen reduction reaction (ORR) is highly desired toward the progress of future sustainable energy storage devices. In this work, we scalably prepare a highly active ORR electrocatalyst which consists of both Fe₃N nanoparticles and Fe-N-C active sites in N-doped carbon frameworks (named as Fe₃N/Fe-N-C) and derives from walnut shells as precursors followed by iron ion incorporation and a pyrolysis process in NH₃ atmosphere. The X-ray diffraction (XRD), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopic (XPS) measurements strongly evidence the coexistence of Fe₃N nanoparticles and iron-nitrogen-carbon active sites. Benefiting from the synergistic mechanism between Fe₃N nanoparticles and Fe-N-C sites in N-doped carbon frameworks, the resultant catalyst presents desirable ORR performance with impressive E_onset, E_1/2, higher long-term stability, and satisfactory resistance to methanol interference, overtopping commercial Pt/C catalyst. The present research not only proposes a cost-effective and available ORR electro-catalyst to substitute Pt-based catalysts, but also provides a reliable and versatile technology to realize large-scale preparation for practical applications.

Atomically Dispersed Fe-N4 Modified with Precisely Located S for Highly Efficient Oxygen Reduction

Immobilizing metal atoms by multiple nitrogen atoms has triggered exceptional catalytic activity toward many critical electrochemical reactions due to their merits of highly unsaturated coordination and strong metal-substrate interaction. Herein, atomically dispersed Fe-NC material with precise sulfur modification to Fe periphery (termed as Fe-NSC) was synthesized, X-ray absorption near edge structure analysis confirmed the central Fe atom being stabilized in a specific configuration of Fe(N3)(N-C-S). By enabling precisely localized S doping, the electronic structure of Fe-N4 moiety could be mediated, leading to the beneficial adjustment of absorption/desorption properties of reactant/intermediate on Fe center. Density functional theory simulation suggested that more negative charge density would be localized over Fe-N4 moiety after S doping, allowing weakened binding capability to *OH intermediates and faster charge transfer from Fe center to O species. Electrochemical measurements revealed that the Fe-NSC sample exhibited significantly enhanced oxygen reduction reaction performance compared to the S-free Fe-NC material (termed as Fe-NC), showing an excellent onset potential of 1.09 V and half-wave potential of 0.92 V in 0.1 M KOH. Our work may enlighten relevant studies regarding to accessing improvement on the catalytic performance of atomically dispersed M-NC materials by managing precisely tuned local environments of M-Nx moiety.

Fabrication of a double-layer membrane cathode based on modified carbon nanotubes for the sequential electro-Fenton oxidation of p-nitrophenol

To improve the electrocatalytic efficiency of the cathode and provide a wider pH range in the electro-Fenton process, N-doped multi-walled carbon nanotubes (NCNTs) and ferrous ion complexed with carboxylated carbon nanotubes (CNT-COOFe²⁺) were used to fabricate the diffusion layer and catalyst layer of a membrane cathode, respectively. The morphology, structure, and composition of CNT-COOFe²⁺ were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). The oxygen reduction performance of NCNT was evaluated using cyclic voltammetry (CV) and the rotating disk electrode technique (RDE). In addition, a potential application of the cathode in sequential electro-Fenton degradation of p-nitrophenol (p-NP) was investigated. The results revealed that iron was successfully doped on the carboxylated carbon nanotubes in ionic complexation form and the content of iron atoms in CNT-COOFe²⁺ was 2.65%. Furthermore, the defects on the tube walls provided more reactive sites for the electro-Fenton process. A combination of CV and RDE data indicated that NCNT had better electrocatalytic H₂O₂ generation activity with a more positive onset potential and higher cathodic peak current response than CNT. A p-NP removal rate of 96.04% was achieved within 120 min, and a mineralization efficiency of 80.26% was obtained at 180 min in the sequential electro-Fenton process at a cathodic potential of - 0.7 V vs SCE and neutral pH. The activity of the used cathode was restored simply through electro-reduction at - 1.0 V vs SCE, and a p-NP removal rate of more than 70% was obtained at 60 min after six regeneration cycles.

Role of the two PsaE isoforms on O2 reduction at photosystem I in Arabidopsis thaliana

Leaves of Arabidopsis thaliana plants grown in short days (8 h light) generate more reactive oxygen species in the light than leaves of plants grown in long days (16 h light). The importance of the two PsaE isoforms of photosystem I, PsaE1 and PsaE2, for O₂ reduction was studied in plants grown under these different growth regimes. In short day conditions a mutant affected in the amount of PsaE1 (psae1-1) reduced more efficiently O₂ than a mutant lacking PsaE2 (psae2-1) as shown by spin trapping EPR spectroscopy on leaves and by following the kinetics of P700⁺ reduction in isolated photosystem I. In short day conditions higher O₂ reduction protected photosystem II against photoinhibition in psae1-1. In contrast in long day conditions the presence of PsaE1 was clearly beneficial for photosynthetic electron transport and for the stability of the photosynthetic apparatus under photoinhibitory conditions. We conclude that the two PsaE isoforms have distinct functions and we propose that O₂ reduction at photosystem I is beneficial for the plant under certain environmental conditions.

Rh-doped PdAg nanoparticles as efficient methanol tolerance electrocatalytic materials for oxygen reduction

Direct methanol fuel cells (DMFCs) have received extensive attention on their high efficiency, high reliability, and no carbon emission. Unfortunately, the poor methanol tolerance and sluggish oxygen reduction reaction (ORR) at cathode have seriously hindered their further development. Herein we report the synthesis of a new class of Rh-doped PdAg alloy nanoparticles (NPs) for boosting ORR activity with high methanol tolerance capacity concurrently. The ORR mass activity of typical Rh₄Pd₄₀Ag₅₆ NPs is 4.2 times higher than that of commercial Pt catalyst. Moreover, it shows a great methanol tolerance capability by maintaining 92.4% in ORR mass activity in alkaline solution with 0.1 mol L^-1 methanol, against a big decrease of almost 100% for commercial Pt. Even after 30,000 potential cycles with 1.0 mol L^-1 methanol, Rh₄Pd₄₀Ag₅₆ NPs still retain ORR mass activity of up to 68.3%. DFT calculations reveal that excellent ORR performance with excellent methanol tolerance originates the active d-band-pinning engineering for an efficient site-independent electron-transfer. A generalized d-band mediated fine electron-transfer tuning path has blueprinted for effectively minimizing intrinsic ORR barriers with high current density. The present work highlights the key role of Rh doping in enhancing the ORR activity and methanol tolerance ability of PdAg NPs for future high-performance DMFCs.

Mechanism of proton transfer through the KC proton pathway in the Vibrio cholerae cbb3 terminal oxidase

The heme‑copper oxidases (HCuOs) are terminal components of the respiratory chain, catalyzing oxygen reduction coupled to the generation of a proton motive force. The C-family HCuOs, found in many pathogenic bacteria under low oxygen tension, utilize a single proton uptake pathway to deliver protons both for O2 reduction and for proton pumping. This pathway, called the KC-pathway, starts at Glu-49P in the accessory subunit CcoP, and connects into the catalytic subunit CcoN via the polar residues Tyr-(Y)-227, Asn (N)-293, Ser (S)-244, Tyr (Y)-321 and internal water molecules, and continues to the active site. However, although the residues are known to be functionally important, little is known about the mechanism and dynamics of proton transfer in the KC-pathway. Here, we studied variants of Y227, N293 and Y321. Our results show that in the N293L variant, proton-coupled electron transfer is slowed during single-turnover oxygen reduction, and moreover it shows a pH dependence that is not observed in wildtype. This suggests that there is a shift in the pKa of an internal proton donor into an experimentally accessible range, from >10 in wildtype to ~8.8 in N293L. Furthermore, we show that there are distinct roles for the conserved Y321 and Y227. In Y321F, proton uptake from bulk solution is greatly impaired, whereas Y227F shows wildtype-like rates and retains ~50% turnover activity. These tyrosines have evolutionary counterparts in the K-pathway of B-family HCuOs, but they do not have the same roles, indicating diversity in the proton transfer dynamics in the HCuO superfamily.

Effect of artificial redox mediators on the photoinduced oxygen reduction by photosystem I complexes

The peculiarities of interaction of cyanobacterial photosystem I with redox mediators 2,6-dichlorophenolindophenol (DCPIP) and N,N,N',N'-tetramethyl-p-phenylenediamine (TMPD) were investigated. The higher donor efficiency of the reduced DCPIP form was demonstrated. The oxidized form of DCPIP was shown to be an efficient electron acceptor for terminal iron-sulfur cluster of photosystem I. Likewise methyl viologen, after one-electron reduction, DCPIP transfers an electron to the molecular oxygen. These results were discussed in terms of influence of these interactions on photosystem I reactions with the molecular oxygen and natural electron acceptors.

Dicyandiamide and iron-tannin framework derived nitrogen-doped carbon nanosheets with encapsulated iron carbide nanoparticles as advanced pH-universal oxygen reduction catalysts

The development of an efficient and cost-effective electrocatalyst toward the oxygen reduction reaction (ORR) is of critical importance for diverse renewable electrical energy techniques. Herein, a dicyandiamide and iron-tannin framework-derived nitrogen-doped carbon nanosheet with encapsulated iron carbide nanoparticle (Fe₃C/N-CNS) is developed. Particularly, dicyandiamide is the key to achieve this two-dimensional nitrogen-doped lamellar carbon nanosheet. Owing to the synergistic characteristics including composition and structure, the optimal catalyst exhibits the comparable or even better catalytic activity, as well as superior methanol tolerance and stability compared with platinum/carbon catalyst over the whole pH range. More notably, the current approach can be potentially extended to synthesize additional two-dimensional structured transition-metal/carbon composites for various energy conversion and storage technologies.

Multimetallic AuPd@Pd@Pt core-interlayer-shell icosahedral electrocatalysts for highly efficient oxygen reduction reaction

Incorporating Pt with core metals into Pt-based core-shell catalysts is regarded as a promising strategy to substantially enhance the catalytic properties towards oxygen reduction reaction (ORR) in fuel cells due to the synergetic effect between distinct metals. In this wok, ultrathin Pt skins with two atomic layers were epitaxially coated on as-prepared icosahedral Au₅₀Pd₅₀, Au₆₀Pd₄₀ and Au₆₆Pd₃₄ nanocrystal seeds, which are constructed with alloyed cores and Pd shells with different thickness. Through electron microscopic characterizations, Pd interlayers with tunable thickness of 3, 6, and 12 atomic layers can be found in the Au₆₆Pd₃₄@Pt, Au₆₀Pd₄₀@Pt and Au₅₀Pd₅₀@Pt icosahedra, respectively. These icosahedral AuPd@Pd@Pt nanocrystals show substantially enhanced activities and durabilities in electrocatalytic measurements towards ORR compared to Au₇₅Pd₂₅@Pt icosahedra without Pd interlayer and commercial Pt/C catalysts. Specifically, Au₆₀Pd₄₀@Pt icosahedra with 6 atomically thick Pd interlayer display the best electrocatalytic performances, whose mass activities before and after durability tests of 50,000 cycles are 11.6 and 30.2 times, respectively, as high as that of the commercial Pt/C.

The Chemical Evolution of the La0.6Sr0.4CoO3-δ Surface Under SOFC Operating Conditions and Its Implications for Electrochemical Oxygen Exchange Activity

Owing to its extraordinary high activity for catalysing the oxygen exchange reaction, strontium doped LaCoO₃ (LSC) is one of the most promising materials for solid oxide fuel cell (SOFC) cathodes. However, under SOFC operating conditions this material suffers from performance degradation. This loss of electrochemical activity has been extensively studied in the past and an accumulation of strontium at the LSC surface has been shown to be responsible for most of the degradation effects. The present study sheds further light onto LSC surface changes also occurring under SOFC operating conditions. In-situ near ambient pressure X-ray photoelectron spectroscopy measurements were conducted at temperatures between 400 and 790 °C. Simultaneously, electrochemical impedance measurements were performed to characterise the catalytic activity of the LSC electrode surface for O₂ reduction. This combination allowed a correlation of the loss in electro-catalytic activity with the appearance of an additional La-containing Sr-oxide species at the LSC surface. This additional Sr-oxide species preferentially covers electrochemically active Co sites at the surface, and thus very effectively decreases the oxygen exchange performance of LSC. Formation of precipitates, in contrast, was found to play a less important role for the electrochemical degradation of LSC.

The Oxygen Reduction Electrocatalytic Activity of Cobalt and Nitrogen Co-doped Carbon Nanocatalyst Synthesized by a Flat Template

The design of noble-metal-free catalysts for oxygen reduction reaction (ORR) is very important to the commercialization of fuel cells. Here, we use a Co-modified montmorillonite (Co-MMT) as a flat template to prepare Co- and N-doped nanocarbon ORR catalysts derived from carbonization of polyaniline at controlled temperatures. The use of flat template can hinder the agglomeration of polyaniline during pyrolysis process and optimize the N-rich active site density on the surface. The addition of transition metal Co in the flat MMT template can largely promote the formation of Co-N sites in prepared catalyst, facilitating the effective improvement of catalytic activity towards the ORR with a direct four-electron transfer pathway. The excellent ORR activity may be mainly attributed to high contents of graphitic N, pyridinic-N, and Co-N configurations. This study opens a new way to rationally design cheap and active ORR catalysts by using simple flat compound as a direct template.

Study on the oxygen reduction reaction catalyzed by a cold-tolerant marine strain phylogenetically related to Erythrobacter citreus

As the development of marine economy, the submarine battery with the seawater electrolyte has obtained more and more attentions. Owing to the conventional electrochemical catalysts of the cathodes in seawater battery are expensive, it is to seek the new biological catalysts to improve the electrochemical performance of the cathode and reduce the cost of seawater battery. A novel marine bacterial strain (Strain SQ-32) phylogenetically related to the Erythrobactercitreus strain has been isolated from the sea-bed sludge in the Yellow Sea of China successfully. The electrochemical measurements, which include the cyclic voltammetry, potentiostatic polarization, and electrochemical impedance spectroscopy, have been conducted in synthetic seawater. The electrochemical testing results show that the Strain SQ-32 is a cold-tolerant bacterium, which may exhibit a catalytic activity for the ORR in synthetic seawater at a freezing temperature. The SEM photo demonstrates that the Strain SQ-32 displays a rod-shaped characteristic, which has a diameter of 0.4μm and a length of about 1-2.5μm. By the testing of Gram staining, the Strain SQ-32 has been identified as a Gram-negative bacterium. The chemical analytical result reveals that the bacterium cell of Strain SQ-32 contains 1.92mgg^-1 (DCW) of coenzyme Q10, which is a possible impact factor on the electro-catalytic effect on the Strain SQ-32. The exploitation of Strain SQ-32 may boost the development of the biocathode of seawater battery at a low temperature.

The competition between cathodic oxygen and ozone reduction and its role in dictating the reaction mechanisms of an electro-peroxone process

Previous studies indicate that effective generation of hydrogen peroxide (H₂O₂) from cathodic oxygen (O₂) reduction is critical for the improved water treatment performance (e.g., enhanced pollutant degradation and reduced bromate formation) during the electro-peroxone (E-peroxone) process (a combined process of electrolysis and ozonation). However, undesired reactions (e.g., O₃, H₂O₂, and H₂O reductions) may occur in competition with O₂ reduction at the cathode. To get a better understanding of how these side reactions would affect the process, this study investigated the cathodic reaction mechanisms during electrolysis with O₂/O₃ gas mixture sparging using various electrochemical techniques (e.g., linear sweep voltammetry and stepped-current chronopotentiometry). Results show that when a carbon brush cathode was used during electrolysis with O₂/O₃ sparging, H₂O and H₂O₂ reductions were usually negligible cathodic reactions. However, O₃ can be preferentially reduced at much more positive potentials (ca. 0.9 V vs. SCE) than O₂ (ca. -0.1 V vs. SCE) at the carbon cathode. Therefore, cathodic O₂ reduction was inhibited when the process was operated under current limited conditions for cathodic O₃ reduction. The inhibition of O₂ reduction prevented the desired E-peroxone process (cathodic O₂ reduction to H₂O₂ and ensuing reaction of H₂O₂ with O₃ to OH) from occurring. In contrast, when cathodic O₃ reduction was limited by O₃ mass transfer to the cathode, cathodic O₂ reduction to H₂O₂ could occur, thus enabling the E-peroxone process to enhance pollutant degradation and mineralization. Many process and water parameters (applied current, ozone dose, and reactivity of water constituents with O₃) can cause fundamental changes in the cathodic reaction mechanisms, thus profoundly influencing water treatment performance during the E-peroxone process. To exploit the benefits of H₂O₂ in water treatment, reaction conditions should be carefully controlled to promote cathodic O₂ reduction during the E-peroxone process.