Advances in sample environments for neutron scattering for colloid and interface science

This review describes recent advances in sample environments across the full complement of applicable neutron scattering techniques to colloid and interface science. Temperature, pressure, flow, tensile testing, ultrasound, chemical reactions, IR/visible/UV light, confinement, humidity and electric and magnetic field application, as well as tandem X-ray methods, are all addressed. Consideration for material choices in sample environments and data acquisition methods are also covered as well as discussion of current and potential future use of machine learning and artificial intelligence.

Nutrient transport, shear strength and hydraulic characteristics of topsoils amended with mulch, compost and biosolids

Anthropogenic disturbance of soils can disrupt soil structure, diminish fertility, alter soil chemical properties, and cause erosion. Current remediation practices involve amending degraded urban topsoils lacking in organic matter and nutrition with organic amendments (OA) to enhance vegetative growth. However, the impact of OAs on water quality and structural properties at rates that meet common topsoil organic matter specifications need to be studied and understood. This study tested three commonly available OAs: shredded wood mulch, leaf-based compost, and class A Exceptional Quality stabilized sewage sludge (or biosolids) for nutrient (nitrogen and phosphorus) water quality, soil shear strength, and hydraulic properties, through two greenhouse tub studies. Findings showed that nitrogen losses to leachate were greater in the biosolids amended topsoils compared to leaf-compost, mulch amended topsoils, and control treatments. Steady-state mean total nitrogen (N) concentrations from biosolids treatment exceeded typical highway stormwater concentrations by at least 25 times. Soil total N content combined with the carbon:nitrogen ratio were identified to be the governing properties of N leaching in soils. Study soils, irrespective of the type of amendment, reduced the applied (tap) water phosphorus (P) concentration of ∼0.3 mg-P/L throughout the experiment. Contrary to the effects on N leaching, P was successfully retained by the biosolids amendment, due to the presence of greater active iron contents. A breakthrough mechanism for P was observed in leaf compost amended soil, where the effluent concentrations of P continued to increase with each rainfall application, possibly due to an saturation of soil adsorption sites. The addition of OAs also improved the strength and hydraulic properties of soils. The effective interlocking mechanisms between the soil and OA surfaces could provide soil its required strength and stability, particularly on slopes. OAs also improved soil fertility to promote turf growth. Presence of vegetative root zones can further reinforce the soil and control erosion.

Implementing an accelerometer-based pelvis segment for low back kinetic analyses during dynamic movement tasks

An accelerometer-based pelvis has been employed to study segment and joint kinematics during scenarios involving close human-object interface and/or line-of-sight obstructions. However, its accuracy for examining low back kinetic outcomes is unknown. This study compared reaction moments and contact forces of the L5S1 joint calculated with an accelerometer-based and optically tracked pelvis segment. An approach to correct the global pelvis position as a function of thigh angle was developed. One participant performed four dynamic tasks: forward bend, squat, sit-to-stand-to-sit, and forward lunge. A standard bottom-up inverse dynamics approach was used and the root mean square error (RMSE) and coefficient of determination (R2) were calculated to examine kinetic differences between the optical and accelerometer approaches. The RMSE observed for L5S1 reaction flexion-extension moments ranged from 1.32 Nm to 2.20 Nm (R2 ≥ 0.98). The RMSE for net shear and compression reaction forces ranged from 2.13 to 10.45 N and 0.63 - 4.96 N, respectively. Similarly, the RMSE for L5S1 joint contact shear and compression ranged from 13.45 N to 19.51 N (R2 ≥ 0.85) and 31.18 N - 55.97 N (R2 ≥ 0.97), respectively. In conclusion, the accelerometer-based pelvis together with the approach to correct the global pelvis position is a feasible approach for computing low back kinetics with a single equivalent muscle model. The observed error in joint contact forces represents less than 5 % of the NIOSH recommended action limits and is unlikely to alter the interpretation of low back injury risk.

Engineering placental trophoblast fusion: A potential role for biomechanics in syncytialization

The process by which placental trophoblasts fuse to form the syncytiotrophoblast around the chorionic villi is not fully understood. Mechanical features of the in vivo and in vitro culture environments have recently emerged as having the potential to influence fusion efficiency, and considering these mechanical cues may ultimately allow predictive control of trophoblast syncytialization. Here, we review recent studies that suggest that biomechanical factors such as shear stress, tissue stiffness, and dimensionally-related stresses affect villous trophoblast fusion efficiency. We then discuss how these stimuli might arise in vivo and how they can be incorporated in cultures to study and enhance villous trophoblast fusion. We believe that this mechanical paradigm will provide novel insight into manipulating the syncytialization process to better engineer improved models, understand disease progression, and ultimately develop novel therapeutic strategies.

Influence of Hematocrit Level and Integrin αIIbβIII Function on vWF-Mediated Platelet Adhesion and Shear-Induced Platelet Aggregation in a Sudden Expansion

Purpose

Shear-mediated thrombosis is a clinically relevant phenomenon that underlies excessive arterial thrombosis and device-induced thrombosis. Red blood cells are known to mechanically contribute to physiological hemostasis through margination of platelets and vWF, facilitating the unfurling of vWF multimers, and increasing the fraction of thrombus-contacting platelets. Shear also plays a role in this phenomenon, increasing both the degree of margination and the near-wall forces experienced by vWF and platelets leading to unfurling and activation. Despite this, the contribution of red blood cells in shear-induced platelet aggregation has not been fully investigated-specifically the effect of elevated hematocrit has not yet been demonstrated.

Methods

Here, a microfluidic model of a sudden expansion is presented as a platform for investigating platelet adhesion at hematocrits ranging from 0 to 60% and shear rates ranging from 1000 to 10,000 s-1. The sudden expansion geometry models nonphysiological flow separation characteristic to mechanical circulatory support devices, and the validatory framework of the FDA benchmark nozzle. PDMS microchannels were fabricated and coated with human collagen. Platelets were fluorescently tagged, and blood was reconstituted at variable hematocrit prior to perfusion experiments. Integrin function of selected blood samples was inhibited by a blocking antibody, and platelet adhesion and aggregation over the course of perfusion was monitored.

Results

Increasing shear rates at physiological and elevated hematocrit levels facilitate robust platelet adhesion and formation of large aggregates. Shear-induced platelet aggregation is demonstrated to be dependent on both αIIbβIII function and the presence of red blood cells. Inhibition of αIIbβIII results in an 86.4% reduction in overall platelet adhesion and an 85.7% reduction in thrombus size at 20-60% hematocrit. Hematocrit levels of 20% are inadequate for effective platelet margination and subsequent vWF tethering, resulting in notable decreases in platelet adhesion at 5000 and 10,000 s-1 compared to 40% and 60%. Inhibition of αIIbβIII triggered dramatic reductions in overall thrombus coverage and large aggregate formation. Stability of platelets tethered by vWF are demonstrated to be αIIbβIII-dependent, as adhesion of single platelets treated with A2A9, an anti-αIIbβIII blocking antibody, is transient and did not lead to sustained thrombus formation.

Conclusions

This study highlights driving factors in vWF-mediated platelet adhesion that are relevant to clinical suppression of shear-induced thrombosis and in vitro assays of platelet adhesion. Primarily, increasing hematocrit promotes platelet margination, permitting shear-induced platelet aggregation through αIIbβIII-mediated adhesion at supraphysiological shear rates.

Supplementary Information

The online version contains supplementary material available at 10.1007/s12195-024-00796-0.

The biomechanical properties of human menisci: A systematic review

Biomechanical characterization of meniscal tissue ex vivo remains a critical need, particularly for the development of suitable meniscus replacements or therapeutic strategies that target the native mechanical properties of the meniscus. To date, a huge variety of test configurations and protocols have been reported, making it extremely difficult to compare the respective outcome parameters, thereby leading to misinterpretation. Therefore, the purpose of this systematic review was to identify test-specific parameters that contribute to uncertainties in the determination of mechanical properties of the human meniscus and its attachments, which derived from common quasi-static and dynamic tests in tension, compression, and shear. Strong evidence was found that the determined biomechanical properties vary significantly depending on the specific test parameters, as indicated by up to tenfold differences in both tensile and compressive properties. Test mode (stress relaxation, creep, cyclic) and configuration (unconfined, confined, in-situ), specimen shape and dimensions, preconditioning regimes, loading rates, post-processing of experimental data, and specimen age and degeneration were identified as the most critical parameters influencing the outcome measures. In conclusion, this work highlights an unmet need for standardization and reporting guidelines to facilitate comparability and may prove beneficial for evaluating the mechanical properties of novel meniscus constructs. STATEMENT OF SIGNIFICANCE: The biomechanical properties of the human meniscus have been studied extensively over the past decades. However, it remains unclear to what extent both test protocol and specimen-related differences are responsible for the enormous variability in material properties. Therefore, this systematic review analyzes the biomechanical properties of the human meniscus in the context of the underlying testing protocol. The most sensitive parameters affecting the determination of mechanical properties were identified and critically discussed. Currently, it is of utmost importance for scientists evaluating potential meniscal scaffolds and biomaterials to have a control group rather than a direct comparison to the literature. Standardization of both test procedures and reporting requirements is needed to improve and accelerate the development of meniscal replacement constructs.

Agitation role (Dissolved Oxygen) in production of laccase from newly identified Ganoderma multistipitatum sp. nov. and its effect on mycelium morphology

BACKGROUND

Agitation speed influenced the production rate of laccase. Orbital speed not only influenced the enzyme production, but was also effective to dissolve the oxygen during growth of mycelium, spores, and chlamydospores. Shear effects of speed greatly influenced the morphology of mycelium.

METHODS

Ganoderma multistipitatum was identified by ITS marker. Phylogenetic tree was constructed for species identification. Qualitatively by plate method contained guaiacol indicator, while quantitatively by submerged fermentation and Central Composite Design applied on agitation parameter for maximum laccase potential of this species. The effects of agitation speed on mycelium morphology were observed under compound and scanning electron microscope.

RESULTS

Statistical optimization of agitation conditions were performed by using response surface methodology to enhance the production of laccase from Ganoderma multistipitatum sp. nov. Maximum laccase yield (19.44 × 105 ± 0.28 U/L) was obtained at 150 rpm grown culture, which was higher than predicted value of laccase production (19.18 × 105 U/L) under aerobic conditions (150 rpm). The 150 rpm provided the continuous flush of oxygen. The DO (dissolved oxygen) was maximum (65%) for "27 h" incubation at 150 rpm during laccase synthesis. The statistical value of laccase production was minimum under anaerobic or nearly static condition of 50 rpm. The predicted (12.78 × 105 U/L) and obtained (12.82 × 105 U/L) yield was low at 50 rpm. Optimization of orbital shaking for aeration conditions were performed by the use of "Response Surface Methodology". The submerged shaking flasks were utilized as a nutrients growth medium to maximize the production of laccase from G. multistipitatum. The minimum incubation time highly influenced the laccase yield from 7 to 15 days via utilization of less cost-effective medium under a promising and eco-friendly method. The morphological effects of rpm on mycelium were examined under compound and scanning electron microscopy. Higher rpm (200, 230) shear the mycelium, while 150 to 200 rpm exhibited smoother and highly dense branches of mycelia.

CONCLUSION

The shear forces of 200 rpm caused the damages of mycelium and cells autolysis with less laccase production. This study concluded that 150 rpm saved the life of mycelium and enhanced the production rate of enzymes.

Shear's role in non-union. Measuring mean angle of long bone multi-fragmentary non-unions

INTRODUCTION

Both mechanical and biological theories have been proposed in the development of non-union. The mechanical theory suggests that a high strain environment in a fracture will predispose it to non-union. While in simple fractures and wedge fractures there are only one and two primary fracture planes respectively, in multi-fragmentary fractures there are many and a non-union may form along any of the original fracture lines, however the plane which experiences the highest strain is at 45O - the shear plane. We hypothesise that in multi-fragmentary fractures the initial fracture line that most often fails to unite will tend towards the plane with the highest strain.

OBJECTIVES

1) Define the mean non-union angle in a cohort of multi-fragmentary tibial and femoral fractures. 2) In wedge-like fractures within the cohort, define and compare the mean angle of initial fracture planes which go on to form a non-union to those that unite 3) In comminuted fractures within the cohort, define the mean non-union angle DESIGN: Retrospective cohort study SETTING: Level-1 trauma centre METHODOLOGY: Fractures were categorised into wedge-like and comminuted. A published technique was utilised to measure fracture and non-union angles. In wedge-like fractures, united and non-united initial planes were compared. In comminuted fractures only the mean non-union angle was defined. Demographic patient data was also collected.

RESULTS

183 non-unions were screened, 68 patients were included. The mean non-union angle was 56°(SD 18) across all fractures. In wedge-like fractures the mean non-union angle was 59°(SD 18). In comminuted fractures the mean non-union angle was 50°(SD 19). Non-united initial fracture planes in wedge-like fractures showed a peaked distribution about a mean of 58° while united fracture planes were distributed at the extremities of the range.

CONCLUSIONS

In patients with multi-fragmentary fractures resulting in non-union, the mean tibial non-union angle was 52° while the mean femoral non-union angle was 65°. In wedge-like fractures, non-unions occurred more commonly than appropriate union in fractures between 41°-80°. The non-union angle is closer to 45° in comminuted fractures than in wedge-like fractures. These results support the mechanical theory that strain from the shear plane is an important factor in the formation of non-unions.

LEVEL OF EVIDENCE

Prognostic level 3.

Role of grinding method on granular activated carbon characteristics

A coconut shell (AC1230CX) and a bituminous coal based (F400) granular activated carbon (GAC) were ground with mortar and pestle (MP), a blender, and a bench-scale ball milling unit (BMU). Blender was the most time-efficient for particle size reduction. Four size fractions ranging from 20 × 40 to 200 × 325 were characterized along with the bulk GACs. Compared to bulk GACs, F400 blender and BMU 20 × 40 fractions decreased in specific surface area (SSA, -23% and -31%, respectively) while smaller variations (-14% to 5%) occurred randomly for AC1230CX ground fractions. For F400, the blender and BMU size fraction dependencies were attributed to the combination of (i) radial trends in the F400 particle properties and (ii) importance of shear (outer layer removal) versus shock (particle fracturing) size reduction mechanisms. Compared to bulk GACs, surface oxygen content (At%-O1s) increased up to 34% for the F400 blender and BMU 20 × 40 fractions, whereas all AC1230CX ground fractions, except for the blender 100 × 200 and BMU 60 × 100 and 100 × 200 fractions, showed 25-29% consistent increases. The At%-O1s gain was attributed to (i) radial trends in F400 properties and (ii) oxidization during grinding, both of which supported the shear mechanism of mechanical grinding. Relatively small to insignificant changes in point of zero charge (pH_PZC) and crystalline structure showed similar trends with the changes in SSA and At%-O1s. The study findings provide guidance for informed selection of grinding methods based on GAC type and target particle sizes to improve the representativeness of adsorption studies conducted with ground GAC, such as rapid small-scale column tests. When GACs have radial trends in their properties and when the target size fraction only includes larger particle sizes, manual grinding is recommended.

The role of biomechanical stress in extracellular vesicle formation, composition and activity

Extracellular vesicles (EVs) are cornerstones of intercellular communication with exciting fundamental, clinical, and more broadly biotechnological applications. However, variability in EV composition, which results from the culture conditions used to generate the EVs, poses significant fundamental and applied challenges and a hurdle for scalable bioprocessing. Thus, an understanding of the relationship between EV production (and for clinical applications, manufacturing) and EV composition is increasingly recognized as important and necessary. While chemical stimulation and culture conditions such as cell density are known to influence EV biology, the impact of biomechanical forces on the generation, properties, and biological activity of EVs remains poorly understood. Given the omnipresence of these forces in EV preparation and in biomanufacturing, expanding the understanding of their impact on EV composition-and thus, activity-is vital. Although several publications have examined EV preparation and bioprocessing and briefly discussed biomechanical stresses as variables of interest, this review represents the first comprehensive evaluation of the impact of such stresses on EV production, composition and biological activity. We review how EV biogenesis, cargo, efficacy, and uptake are uniquely affected by various types, magnitudes, and durations of biomechanical forces, identifying trends that emerge both generically and for individual cell types. We also describe implications for scalable bioprocessing, evaluating processes inherent in common EV production and isolation methods, and propose a path forward for rigorous EV quality control.

The acetabular labrum tissue shows unique transcriptome signatures compared to cartilage and responds to combined cyclic compression and surface shearing

The labrum is a fibrocartilaginous ring surrounding the acetabulum. Loss of labrum function contributes to the degeneration of the hip joint, leading to osteoarthritis. Successful labrum restoration requires profound knowledge about the tissue being replaced. The aim of this study was to characterize the transcriptome and the mechanobiological function of the labrum. RNA-seq was performed to compare the transcriptome of bovine labrum against articular cartilage tissue. Differential expression and gene ontology (GO) term pathway analysis were applied using the SUSHI framework. Bovine labrum explants were cultured for 5 days with / without mechanical loading and targeted gene expression was analyzed by real time quantitative polymerase chain reaction. More than 6'000 genes were significantly differentially expressed in the labrum compared to cartilage. Up- and downregulated genes were associated with the GO term extracellular matrix organization. The study established an extracellular matrix gene expression profile of healthy labrum tissue and identified significantly upregulated extracellular matrix related genes compared to cartilage tissue. Mechanical loading significantly upregulated aggrecan (ACAN), cartilage oligomeric matrix protein (COMP), fibronectin (FN1) and proteoglycan 4 (PRG4). MMP1/3/9 and IL6, which were upregulated by an inflammatory stimulus (IL-1b), were statistically unaffected by the loading, although IL6 was upregulated in each donor immediately after the loading. Unique ECM related features may guide the development of labrum tissue-engineering solutions. Despite the transcriptome differences between labrum and cartilage tissue, gene expression response to mechanical loading showed similarities with previously reported responses in cartilage, indicating a preserved tissue adaptation mechanism to mechanical loading. Running title: Acetabular Labrum Mechanobiology.

Impact of ultra-shear technology on quality attributes of model dairy-pea protein dispersions with different fat levels

This study investigated the impact of ultra-shear technology (UST) processing on dairy-pea protein dispersions with different fat levels. Raw milk, skim milk, and cream, as well as model dispersions with combinations of dairy products and pea protein (i.e., raw milk with pea protein, skim milk with pea protein, and cream with pea protein) were employed as test samples. UST experiments were conducted at a pressure of 400 MPa and 70 °C shear valve exit temperature. The UST treatment increased the viscosity of the dispersions and the increases depended on the fat level. Dairy-pea protein dispersions from raw milk and skim milk were shear thinning and mathematically described by the power-law model defined by the consistency coefficient, K (Pa·sⁿ) and the flow behavior index, n. UST treated cream + pea protein dispersions produced structures with gel-like characteristics. Microstructure and particle size analysis determined by laser scanning microscope revealed a reduction in particle size after UST treatment in raw milk + pea protein and skim milk + pea protein dispersions up to 7.55 and 8.30 μm, respectively. In contrast, the particle mean diameter of cream + pea protein dispersions increased up to 77.20 μm after the UST treatment. Thus, the effect of UST on the particle size and rheological behavior of the dispersions depended on the fat level. UST-treated dispersions were stable with no visible phase separation or sedimentation upon centrifugation at 4000×g for 30 min (4 °C). Heat treatment and freeze-thaw treatment of UST-treated samples showed stable blends immediately after the treatments, but subsequent centrifugation showed solid separation. Results from the study suggest that UST is a potential technology to produce stable dairy + pea protein liquids foods with different rheological characteristics for diverse applications.

Study on functional mechanical performance of array structures inspired by cuttlebone

The cuttlebone structure is a complex porous bionic structure with an asymmetric S-shaped wall structure connecting laminar septa. Studies have shown that the cuttlebone structure has a low weight, high strength, and excellent energy absorption capability. To establish bio-inspired structures with superior biological functions, researchers have proposed the sinusoidally corrugated cuttlebone-like array structure (SCS). In this study, referring to Euler's theory combined with the Gaussian curvature, the effects of the thickness t, height H, amplitude A, and period P of the SCS under compressive shearing were analyzed. Through finite element calculations and parameter sensitivity analysis, the optimized Su4-Sl2 SCS was obtained. Based on the optimization results, a structure named the elliptical corrugated cuttlebone-like array structure (ECS) was designed. Various ECSs were prepared via three-dimensional (3D) printing, and the compression and shear deformation characteristics of the ECSs were analyzed through experiments and simulations. The results showed that the bearing capacities of the new ECSs were improved compared with those of SCSs; moreover, Eu60-El90, Eu60-El60, and Eu60-El60 ECSs had the best compressive and shear capacities. From the perspective of the stress, the peak compression, peak shear stress in the y-direction, and peak shear stress in the x-direction were increased by 14.2%, 32.8%, and 14.9%, respectively. From the perspective of the energy, the compressive strain energy, shear strain energy in the y-direction, and shear strain energy in the x-direction were increased by 22.8%, 33.0%, and 78.1%, respectively.

A plantar surface shear strain methodology utilising Digital Image Correlation

The increase in the global diabetic population is leading to an increase in associated complications such as diabetic foot ulceration (DFU), associated amputations, morbidity, which substantial treatment costs. Early identification of DFU risk is therefore of great benefit. International guidelines recommend off-loading is the most important intervention for healing and prevention of DFU, with current research focused on pressure measurement techniques. The contribution of strain to DFU formation is not well understood due to challenges in measurement. The limited data available in the literature suggest that plantar strain is involved in ulcer formation. As a consequence, there is a need for plantar strain measurement systems to advance understanding and inform clinical treatment. A method was developed to determine plantar strain based on a Digital Image Correlation (DIC) approach. A speckle pattern is applied to the plantar aspect of the foot using a low ink transference method. A raised walkway with transparent panels is combined with a calibrated camera to capture images of the plantar aspect throughout a single stance phase. Plantar strain is then determined using 2D DIC and custom analysis summarises these data into clinically relevant metrics. A feasibility study involving six healthy participants was used to assess the efficacy of this new technique. The feasibility study successfully captured plantar surface strain characteristics continuously throughout the stance phase for all participants. Peak mean and averaged mean strains varied in location between participants when mapped into anatomical regions of plantar interest, ranging from the calcaneus to the metatarsal heads and hallux. This method provides the ability to measure plantar skin strain for use in both research and clinical environments. It has the potential to inform improved understanding of the role of strain in DFU formation. Further studies using this technique can support these ambitions and help differentiate between healthy and abnormal plantar strain regimes.

Vitamin D deficiency and anatomical region alters porcine growth plate properties

Ossification of growth plate cartilage mediates longitudinal extension of long bones. Biomechanical and biochemical disruptions of growth plate function may lead to abnormal bone growth. In humans and animals, severe dietary vitamin D deficiency can lead to rickets which features growth plate widening, resulting in abnormalities in growth. However, effects of marginal vitamin D deficiencies on growth plates are not well understood. The purpose of this study was to examine the effects of a vitamin D deficient diet in the 26-day nursery phase on mechanical properties (ultimate normal stress, ultimate shear stress, ultimate strain, and tangent modulus) of porcine growth plate. Standard uniaxial tensile tests were applied on bone-growth plate-bone sections and the total stress was decomposed into normal stress and shear stress. Ultimate shear stress and ultimate strain traits were lower in the vitamin D deficient group than in the control. Regional differences were observed in all four variables. Ultimate normal stress was higher in the anterior region, which was consistent with a previous study. Sex differences were detected in ultimate normal stress, which was higher in females than in males. Interestingly, the classical finding of growth plate widening seen in severe vitamin D deficiency was not observed in the pigs with marginal vitamin D deficiency utilized in this study.

The effect of Rear-End collisions on triaxial acceleration to occupant cervical and lumbar Spines: An analysis of IIHS data

Rear-end impacts are the most frequent type of the more than seven million motor vehicle collisions (MVCs) occurring annually in the United States. The cervical and lumbar spine are the most commonly injured sites as a result of rear-end collisions. The direction and magnitude of accelerations and forces to the spine are considered primary indicators of injury. Yet, there is a dearth of research regarding the relation and quantification of vehicle to occupant accelerations, as well as triaxial acceleration components (and thus, forces) to occupant spines in rear-end impacts. Therefore, the current study utilizes the Insurance Institute of Highway Safety (IIHS) test database to examine the relative relations between vehicle and occupant accelerations, as well as between component accelerations experienced at the cervical and lumbar spines in rear-end collisions. Anthropometric test device (ATD) head and pelvis accelerometer data from IIHS sled testing are used as representative measures of acceleration experienced at the cervical and lumbar spine, respectively. Peak resultant acceleration is calculated at the head and pelvis, and peak directional components (x, y, and z) of acceleration are compared to resultants. This analysis revealed significantly higher occupant head than sled (2.17 ± 0.4 × Sled; p < 0.001) and pelvis than sled (1.24 ± 0.27 × Sled; p < 0.001) accelerations. There were also significant differences across triaxial acceleration components relative to resultant at the head (x = 0.99 ± 0.02, y = 0.11 ± 0.05, z = 0.34 ± 0.06; p < 0.001 for all comparisons) and pelvis (x = 0.94 ± 0.06, y = 0.12 ± 0.14, z = 0.35 ± 0.08; p < 0.001 for all comparisons). A secondary analysis examining differences in occupant dynamics by seat designs across vehicle type revealed significant differences only between the pelvis z component accelerations in the passenger vehicle and SUV groups (passenger vehicle:SUV = 1.07, p < 0.001). Due to the uniform nature of IIHS sled testing protocols, this analysis reflects similarities in seat properties rather than between vehicle types. These results may provide a simplistic approach to quantify the magnitude of directional accelerations and forces to occupant spines in rear-end collisions.

Integration of reginal shear measurements at the foot-ground interface during routine balance assessment of the elderly population

BACKGROUND

Force-plate posturography offers a convenient way for quantitative assessment of postural stability in the elderly. However, studies focusing on routine balance assessment have usually not taken reginal shear distributions (i.e., arising from horizontal forces) into consideration.

RESEARCH QUESTION

(1) Does plantar shear distribution differ between young and elderly subjects during upright standing? (2) How do the maximum plantar shear forces vary at different regions of the foot?

METHODS

The new reginal shear measurement (RSM) method can simultaneously capture the three-dimensional force distributions at regional plantar sites while subjects maintaining standing balance. The feasibility of the proposed method in characterizing the magnitude and distribution of plantar shear forces was tested in thirty-two normal young and nineteen elderly subjects. Statistical analysis was performed using the independent samples t-test for both the continuous and ordinal variables.

RESULTS

For regional AP shear forces, statistically significant differences were found between the two groups for the toe region of the right foot and the midfoot of both feet. For ML shear distributions, statistically significant differences were found at nearly all plantar sites expect for the hallux and lateral metatarsal. The maximum increase in ML shear forces occurred in the toe region of the right foot, where the peak shear values were 113.16% higher than those of the young subjects. The peak ML shear occurred in the midfoot were averagely 83.19% and 70.57% higher in the elderly's left and right feet, respectively.

SIGNIFICANCE

The RSM method may offer unique solutions to identify functional decline in postural control of the elderly. The plantar shear pattern has potential to become an important parameter in evaluating one's balance performance during upright standing.

Generating Monocyte-Derived Endothelial-like Cells for Vascular Regeneration

A major limitation in engineering vascular grafts is the lack of proper endothelium to prevent thrombosis and subsequent graft failure. Obtaining endothelial cells from patients' vasculature is intrusive and requires extensive culture time. Here we present an alternative strategy wherein abundant and easily accessible monocytes from peripheral blood are cultured and differentiated towards an endothelial-like state capable of preventing thrombosis through production of nitric oxide and formation of endothelial adherens junctions. Considering the plethora of monocytes present within peripheral blood, this method provides a robust alternative to generating endothelial cells required for vascular graft production.

Assessing the Stability of Biological Fibrils by Molecular-Scale Simulations

The nanomechanical characterization of several biological fibrils that are the result of protein aggregation via molecular dynamics simulation is nowadays feasible, and together with atomic force microscopy experiments has widened our understanding of the forces in the regime of pN-nN and system sizes of about hundreds of nanometers. Several methodologies have been developed to achieve this target, and they range from the atomistic representation via molecular force fields to coarse-grained strategies that provide comparable results with experiments in a systematic way. In this chapter, we discuss several methodologies for the calculation of mechanical parameters, such as the elastic constants of relevant biological systems. They are presented together with details about parameterization and current limitations. Then, we discuss some of the applications of such methodologies for the description of bacterial filament and β-amyloid systems. Finally, the latest lines of development are discussed.

Acoustic cavitation-induced shear: a mini-review

Acoustic cavitation (or the formation of bubbles using acoustic or ultrasound-based devices) has been extensively exploited for biological applications in the form of bioprocessing and drug delivery/uptake. However, the governing parameters behind the several physical effects induced by cavitation are generally lacking in quantity in terms of suitable operating parameters of ultrasonic units. This review elaborates the current gaps in this realm and summarizes suitable investigative tools to explore the shear generated during cavitation. The underlying physics behind these events are also discussed. Furthermore, current advances of acoustic shear on biological specimens as well as future prospects of this cavitation-induced shear are also described.

Ductility performance of reinforced rubberised concrete beams incorporating burnt clay powder

Application of rubberised concrete in earthquake prone areas is of significant importance. Although investigations have been conducted to research on the ductility of rubberised concrete, the behaviour of rubberised concrete with Burnt Clay Brick Powder (BCBP) is not well understood. This paper captures the ductility behaviour of rubberised concrete containing BCBP. In this study, 3 beams were investigated in flexure while the other 3 beams were made to fail in shear and flexure. For the beams that failed in flexure, ductility of concrete beams containing 5% BCBP and 10% Waste Tire Rubber (WTR) improved by 23.47% compared to control beam. This increase in ductility was evidenced with only 15.31% reduction in flexural load. Moreover, the beam containing 5% BCBP and 10% WTR failing in shear and flexure exhibited 14.59% ductility improvement with 16.33% load reduction in comparison to the control beam. Eventually, the study concluded that it is possible to achieve improved ductility without substantial loss in ultimate failure load by using 5% BCBP and 10% WTR. Such properties demonstrated that this rubberised concrete with 5% BCBP can be used in seismic applications.

Kinetics of aggregation of amyloid β under different shearing conditions: Experimental and modelling analyses

Amyloid β (Aβ40) is a class of amyloidogenic proteins known to aggregate into a fibrillar network. The rate of aggregation and fibril yield is sensitive to external energy input, such as shear. In this work, simple shear and shaking experiments are performed on Aβ40 solution using a Couette cell and an orbital shaker, respectively. Experiments show that, under uniform shear, both the mass of fibrils and aggregation rate increase with the shear rate. In the case of orbital shaking, the lag time decreases with the rotational speed of the shaker, but the final fibril mass is the same for all agitation speeds. To explain this contrasting behavior of aggregation kinetics, a population balance model is developed to account for the effect of shear on the aggregation of Aβ. The kinetic model includes primary nucleation, secondary nucleation, elongation, fragmentation, and depolymerization steps. The effect of steady uniform shear is encoded in the depolymerization rate constant (k_d), and it is shown that k_d decreases with shear rate initially and saturates at high shear rates. A competition between elongation and depolymerization rates yields different equilibrium masses of fibril at different shear rates. The model results agree quantitatively well with experimental data on the rate of aggregation and mass of fibrils as a function of shear rate. The modeling framework can be used to explain the shear rate-dependent aggregation of other amyloidogenic proteins.

Separation of bacteria Kocuria rhizophila BR-1 from its broth during synthesis of gold nanoparticles using ceramic membrane by shear-enhanced filtration process

In the present study, disc type ceramic membranes made from China clay, quartz and calcium carbonate were used for the separation of bacteria Kocuria rhizophila from its broth by shear-enhanced filtration process. Porosity, water permeability and average pore size of the membrane were 42%, 3.24 × 10^-4 L m^-2 h^-1 Pa^-1 and 180 nm, respectively. The membrane exhibited good chemical tolerance in acid, alkali and chlorine solutions. The effect of trans-membrane pressure and rotational speed on permeate flux and bacterial rejection was investigated. It was found that the permeate flux increased (40-163.5 L m^-2 h^-1) and bacterial rejection decreased (99.2-94.5%) with increasing pressure (69-345 kPa). With an increase in rotation (50-250 rpm), the permeate flux increased from 156.5 to 176.8 L m^-2 h^-1, while bacterial rejection decreased from 94.3 to 83.2%. The pressure of 345 kPa and rotational speed of 250 rpm with flux of 176.8 L m^-2 h^-1 and rejection of 83% was selected as an optimum process condition. The analysis of fouling models revealed that the cake filtration model provided the highest R² (0.89) value followed by intermediate pore blocking (0.87) which indicates that cake filtration model has the best fit with the experimental data. Henceforth, the shear enhanced filtration process used in this study can be considered as a pertinent filtration process for efficient recovery of biological products at industrial scale.

The influence of chondrocyte source on the manufacturing reproducibility of human tissue engineered cartilage

Multiple human tissue engineered cartilage constructs are showing promise in advanced clinical trials but identifying important measures of manufacturing reproducibility remains a challenge. FDA guidance suggests measuring multiple mechanical properties prior to implantation, because these properties could affect the long term success of the implant. Additionally, these engineered cartilage mechanics could be sensitive to the autologous chondrocyte source, an inherently irregular manufacturing starting material. If any mechanical properties are sensitive to changes in the autologous chondrocyte source, these properties may need to be measured prior to implantation to ensure manufacturing reproducibility and quality. Therefore, this study identified variability in the compressive, friction, and shear properties of a human tissue engineered cartilage constructs due to the chondrocyte source. Over 200 constructs were created from 7 different chondrocyte sources and tested using 3 distinct mechanical experiments. Under confined compression, the compressive properties (aggregate modulus and hydraulic permeability) varied by orders of magnitude due to the chondrocyte source. The friction coefficient changed by a factor of 5 due to the chondrocyte source and high intrapatient variability was noted. In contrast, the shear modulus was not affected by changes in the chondrocyte source. Finally, measurements on the local compressive and shear mechanics revealed variability in the depth dependent strain fields based on chondrocyte source. Since the chondrocyte source causes large amounts of variability in the compression and local mechanical properties of engineered cartilage, these mechanical properties may be important measures of manufacturing reproducibility. STATEMENT OF SIGNIFICANCE: Although the FDA recommends measuring mechanical properties of human tissue engineered cartilage constructs during manufacturing, the effect of manufacturing variability on construct mechanics is unknown. As one of the first studies to measure multiple mechanical properties on hundreds of human tissue engineered cartilage constructs, we found the compressive properties are most sensitive to changes in the autologous chondrocyte source, an inherently irregular manufacturing variable. This sensitivity to the autologous chondrocyte source reveals the compressive properties should be measured prior to implantation to assess manufacturing reproducibility.

The Regulatory Role of Both MBNL1 and MBNL1-AS1 in Several Common Cancers

BACKGROUND

MBNL1, a protein encoded by q25 gene on chromosome 3, belongs to the tissue-specific RNA metabolic regulation family, which controls RNA splicing.[1]MBNL1 formed in the process of development drive large transcriptomic changes in cell differentiation,[2] it serves as a kind of tumor differentiation inhibitory factor.MBNL1 has a close relationship with cancer, comprehensive analysis, [3]found that breast cancer, leukemia, stomach cancer, esophageal adenocarcinoma, glial cell carcinoma and another common tumor in the cut, and cut in Huntington's disease. But MBNL1 plays a promoting role in cervical cancer, is contradictory in colorectal cancer, It promotes colorectal cancer cell proliferation, On the other hand, it inhibits its metastasis, so it is an important physiological marker in many cancers. When we integrated the role of MBNL1 protein in various tumors, we found that its antisense RNA, MBNL1-AS1, had a good inhibitory effect in several colorectal cancer, non-small cell lung cancer, and gastric cancer.

OBJECTIVE

To elucidate the expression of MBNL1 and MBNL1-AS1 in various tumors, and to search for their physiological markers.

METHODS

It was searched by the PUMUB system and summarized its expression in various cancers.

RESULTS

MBNL1 was down-regulated, leukemia, breast cancer, glioblastoma, gastric cancer, overall survival rate, recurrence, metastasis increased. While the metastasis of colon cancer decreased, proliferation was promoted, and the effect of both was promoted for cervical cancer.MBNL1-AS1 was down-regulated, and the overall survival rate, recurrence, and metastasis of lung cancer, colorectal cancer, and bladder cancer increased.

CONCLUSION

MBNL1 may be an important regulator of cancer, and MBNL1-AS1 is a better tumor suppressor.

Evaluation of fluorohydroxyapatite/strontium coating on titanium implants fabricated by hydrothermal treatment

Titanium and its alloys are considered as appropriate replacements for the irreparable bone. Calcium phosphate coatings are widely used to improve the osteoinduction and osseointegration ability of titanium alloys. To further improve the performance of the calcium phosphate-coated implants, strontium (Sr) was introduced to partially replace the calcium ions. In this study, the effect of Sr ion addition on the fluorohydroxyapatite (FHA)-coated Ti6Al4V alloy was investigated and all the coatings were treated under hydrothermal condition. X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used to investigate the phases and microstructures, respectively. Shear tests were done to evaluate the bond strength of the coating layer. MTT, adhesion, and alkaline phosphatase tests were performed to evaluate the biocompatibility and osteogenic behavior of the samples. Results showed that the average crystallite size for the strontium-doped FHA samples was 48 nm and the bond strength had increased 13.15% in comparison with FHA-coated samples. Analysis of variance showed p value for all MTT tests at more than 0.322 and there was not any evidence of cell death after 7 days. The results of the ALP test showed that the increase of the cell activity in Sr samples from day 7 to 14 is three times higher than the FHA ones.

Microscopic characterisation of local strain field in healing tissue in the central third defect of mouse patellar tendon at early-phase of healing

Tendons exhibit a hierarchical collagen structure, wherein higher-level components, such as collagen fibres and fascicles, are elongated, slid, and rotated during macroscopic stretching. These mechanical behaviours of collagen fibres play important roles in stimulating tenocytes, imposing stretching, compression, and shear deformation. It was hypothesised that a lack of local fibre behaviours in healing tendon tissue may result in a limited application of mechanical stimuli to cells within the tissue, leading to incomplete recovery of tissue structure and functions in regenerated tendons. Therefore, the present study aimed to measure the microscopic strain field in the healing tendon tissue. A central third defect was created in the patellar tendon of mice, and the regenerated tissue in the defect was examined by tensile testing, collagen fibre analysis, and local strain measurement using confocal microscopy at 3 and 6 weeks after surgery. Healing tissue at 3 weeks exhibited a significantly lower strength and disorganised collagen fibre structure compared with the normal tendon. These characteristics at 6 weeks remained significantly different from those of the normal tendon. Moreover, the magnitude of local shear strain in the healing tissue under 4% tissue strain was significantly smaller than that in the normal tendon. Differences in the local strain field may be reflected in the cell nuclear shape and possibly the amount of mechanical stimuli applied to the cells during tendon deformation. Accordingly, restoration of a normal local mechanical environment in the healing tissue may be key to a better healing outcome of tendon injury.

Cellulose-hemicellulose interactions - A nanoscale view

In this work, we study interactions of five different hemicellulose models, i.e. Galactoglucomannan, O-Acetyl-Galactoglucomannan, Fuco-Galacto-Xyloglucan, 4-O-Methylglucuronoxylan, and 4-O-Methylglucuronoarabinoxylan, and their respective binding strength to cellulose nanocrystals by molecular dynamics simulations. Glucuronoarabinoxylan showed the highest free energy of binding, whereas Xyloglucan had the lowest interaction energies amongst the five models. We further performed simulated shear tests and concluded that failure mostly happens at the inter-molecular interaction level within the hemicellulose fraction, rather than at the interface with cellulose. The presence of water molecules seems to have a weakening effect on the interactions of hemicellulose and cellulose, taking up the available hydroxyl groups on the surface of the cellulose for hydrogen bonding. We believe that these studies can shed light on better understanding of plant cell walls, as well as providing evidence on variability of the structures of different plant sources for extractions, purification, and operation of biorefineries.

Articular surface failure in hybrid anatomic glenoid components: a unique failure mechanism

PURPOSE

Glenoid loosening is a common failure mechanism of anatomic total shoulder arthroplasty (TSA). New hybrid fixation glenoids allow bony ingrowth and decrease the rates of glenoid loosening. The purpose of this study is to describe a new failure mode of polyethylene dissociation from the ingrowth cage in a single implant design.

METHODS

A retrospective review was performed using an institutional shoulder arthroplasty database of a single hybrid cage glenoid (Exactech, Gainesville, FL). Implants demonstrating this failure mechanism were investigated.

RESULTS

Five out of 206 (2.4%) primary TSAs with cage glenoids performed at our institution and 2 referred for revision suffered glenoid articular face failure. Mean age was 57 (range 38-67 years). Two of 7 failures (29%) occurred secondary to trauma. Failure occurred at mean 14 months after index arthroplasty (range 0-30 months). Revision occurred at mean 24 months after index arthroplasty (range 6-39 months). Six of the 7 patients (86%) had posteriorly augmented glenoids. All 6 patients who had available pre-failure radiographs demonstrated off-axis deviation between the peripheral pegs and central cage (mean 4.8°, range 3°-6°), which may predispose the implant to failure by pre-stressing the material interface.

CONCLUSION

Failure between the glenoid articular face and the central ingrowth cage is a unique failure mechanism to modular hybrid ingrowth glenoids. We hypothesize that this is predisposed by off-axis drilling leading to pre-stressing of the material interface. Surgeons should be aware of the existence of this failure mechanism, particularly when seeing patients with acute pain after an otherwise unproblematic TSA.

Insights into the formation mechanisms and properties of pectin hydrogel physically cross-linked with chitosan nanogels

This study explores hydrogels based on the physical interaction between soluble pectin and chitosan nanogels. A simple technique for creating chitosan nanogels of controllable size was developed based on a two-step process: physical cross-linking with tripolyphosphate (TPP) and chemical cross-linking with genipin. The particles were stable at acidic pH, which allowed hydrogel formation. Thixotropy experiments demonstrated that the concentration but not the size of the nanogels strongly affected the gel shear modulus. The influence of the post-assembly conditions, including exposure to monovalent salts (NaCl, NaI, and NaF) and pH (2.5 or 5.5), on the gel swelling and mechanical properties was studied. Small angle x-ray scattering (SAXS) results provide evidence that these physical hydrogels are indeed a cross-linked network. These experiments provided insights into the influence of hydrogen bonds and electrostatic interactions on the gel network.

Rheo-NMR to investigate fat crystallization under shear

It is well known that shear has an effect on fat crystallization. Whereas rheo-NMR has been used to study the impact of shear on the crystallization kinetics in the past, these methods mostly used a simple Teflon mixing shaft inside a sophisticated NMR instrument to apply shear to the sample. However, this method did not enable the determination of rheological parameters. In this work, a custom made low-field rheo-NMR device was evaluated, consisting of a commercial rheometer combined with a low-field permanent magnet to enable simultaneous rheological and NMR measurements. Two fats, i.e. partially hardened sunflower oil (PHSO) and soft palm mid fraction (sPMF), were submitted to several rheo-NMR experiments. The results of these experiments clearly indicated that these fats crystallized differently. First, PHSO crystallized faster than sPMF. Moreover, the latter seemed to crystallize in two steps. Initially a weak structure was formed when a low amount of solids was present, but this structure was replaced by a stronger network once more crystals were present. Both fats were studied under stagnant conditions, but also when submitted to low shear rates (1 s⁻¹ and 5 s⁻¹). It was shown that the amount of solids necessary to obtain a viscosity of 10 ​Pa ​s was higher when the shear rate was higher. The strength of the formed crystal network at a given percentage of solids was also weaker as the shear rate during crystallization increased. Whereas these experiments were done non-isothermally, it was shown that rheo-NMR can also perfectly be used for isothermal measurements.

•

A recently developed custom-made rheo-NMR set p was used.

•

The amount of solids and rheological parameters were simultaneously determined.

•

Crystallization at a lower shear rate produced a stronger crystal network.

Exploring the influence of impact severity and posture on vertebral joint mechanics in an in-vitro porcine model

To date, no in vitro studies have been conducted to explore lumbar soft tissue injury potential and altered mechanical properties from exposure to impact forces. After a motor vehicle collision (MVC), the cause of reported acute onset low back pain is difficult to associate with potential soft tissue strain injury sites including the facet joint and innervated facet joint capsule ligament (FJC). Thus, the purpose of this investigation was to quantify intervertebral anterior-posterior (AP) translation and facet joint capsule strain under varying postures and impact severities. Seventy-two porcine spinal units were exposed to three levels of impact severity (4 g, 8 g, 11 g), and posture (Neutral, Flexion, Extension). Impacts were applied using a custom-built impact track that replicated parameters experienced in low to moderate speed rear-end MVCs. Flexion-extension and anterior-posterior shear neutral zone testing were completed prior to impact. AP intervertebral translation and the strain tensor of the facet capsule ligament were measured during impacts. A significant main effect of collision severity was observed for peak AP intervertebral translation (4 g-2.8 ±0.53 mm; 8 g-6.4 ±2.9 mm; 11 g-8.3 ±0.45 mm) and peak FJC shear strain (2.37% strain change from 4 g to 11 g impact severity). Despite observed main effects of impact severity, no influence of posture was observed. This lack of influence of posture and small FJC strain magnitudes suggest that the FJC does not appear to undergo injurious or permanent mechanical changes in response to low-to-moderate MVC impact scenarios.

The effect of dough mixing speed and work input on the structure, digestibility and celiac immunogenicity of the gluten macropolymer within bread

Modern high-speed mechanical dough development (MDD) alters the gluten macropolymer's (GMP) structure. Changes to both the protein and food matrix structure can influence protein digestibility and immunogenicity. This study investigated the relationship between protein structural changes imparted by MDD and gluten's digestibility plus celiac reactivity. Dough was prepared at three mixing speeds (63 rpm, 120 rpm and 200 rpm) to different degrees of development (between 10 and 180% wh.kg^-1). Protein structural changes were characterised by confocal microscopy, free thiol determination and protein extractability assays. MDD altered the structure of gluten within bread, changing the protein's surface area and macrostructure. Breads were digested using the INFOGEST in vitro protocol. Gluten's antigenicity and digestibility were monitored using ELISA and mass spectrometry, by monitoring the concentration of six immunogenic peptides causative of celiac disease. The structural changes imparted by mixing did not affect bread's digestibility or celiac reactivity.

Bulk Wave Velocities in Cortical Bone Reflect Porosity and Compression Strength

The goal of this study was to evaluate whether ultrasonic velocities in cortical bone can be considered as a proxy for mechanical quality of cortical bone tissue reflected by porosity and compression strength. Micro-computed tomography, compression mechanical testing and resonant ultrasound spectroscopy were used to assess, respectively, porosity, strength and velocity of bulk waves of both shear and longitudinal polarisations propagating along and perpendicular to osteons, in 92 cortical bone specimens from tibia and femur of elderly human donors. All velocities were significantly associated with strength (r = 0.65-0.83) and porosity (r = -0.64 to -0.77). Roughly, according to linear regression models, a decrease in velocity of 100 m/s corresponded to a loss of 20 MPa in strength (which is approximately 10% of the largest strength value) and to an increase in porosity of 5%. These results provide a rationale for the in vivo measurement of one or several velocities for the diagnosis of bone fragility.

A Millifluidic Perfusion Cassette for Studying the Pathogenesis of Enteric Infections Using Ex-Vivo Organoids

To generate physiologically-relevant experimental models, the study of enteric diarrheal diseases is turning increasingly to advanced in vitro models that combine ex vivo, stem cell-derived "organoid" cell lines with bioengineered culture environments that expose them to mechanical stimuli, such as fluid flow. However, such approaches require considerable technical expertise with both microfabrication and organoid culture, and are, therefore, inaccessible to many researchers. For this reason, we have developed a perfusion system that is simple to fabricate, operate, and maintain. Its dimensions approximate the volume and cell culture area of traditional 96-well plates and allow the incorporation of fastidious primary, stem cell-derived cell lines with only minimal adaptation of their established culture techniques. We show that infections with enteroaggregative E. coli and norovirus, common causes of infectious diarrhea, in the system display important differences from static models, and in some ways better recreate the pathophysiology of in vivo infections. Furthermore, commensal strains of bacteria can be added alongside the pathogens to simulate the effects of a host microbiome on the infectious process. For these reasons, we believe that this perfusion system is a powerful, yet easily accessible tool for studying host-pathogen interactions in the human intestine.

Mechanics of human vocal folds layers during finite strains in tension, compression and shear

During phonation, human vocal fold tissues are subjected to combined tension, compression and shear loading modes from small to large finite strains. Their mechanical behaviour is however still not well understood. Herein, we complete the existing mechanical database of these soft tissues, by characterising, for the first time, the cyclic and finite strains behaviour of the lamina propria and vocalis layers under these loading modes. To minimise the inter or intra-individual variability, particular attention was paid to subject each tissue sample successively to the three loadings. A non-linear mechanical behaviour is observed for all loading modes: a J-shape strain stiffening in longitudinal tension and transverse compression, albeit far less pronounced in shear, stress accommodation and stress hysteresis whatever the loading mode. In addition, recorded stress levels during longitudinal tension are much higher for the lamina propria than for the vocalis. Conversely, the responses of the lamina propria and the vocalis in transverse compression as well as transverse and longitudinal shears are of the same orders of magnitude. We also highlight the strain rate sensitivity of the tissues, as well as their anisotropic properties.

Point-of-care platelet function tests: relevance to arterial thrombosis and opportunities for improvement

Studies using whole blood platelet aggregometry as a laboratory research tool, provided important insights into the mechanism and modulators of platelet aggregation. Subsequently, a number of point-of-care (POC) platelet function tests (PFTs) were developed for clinical use, based on the concept that an individual’s thrombotic profile could be assessed in vitro by assessing the response to stimulation of platelet aggregation by specific, usually solo agonists such as adenosine diphosphate (ADP), collagen and thrombin. However, adjusting antiplatelet medication in order to improve the results of such POC PFTs has not translated into a meaningful reduction in cardiovascular events, which may be attributable to important differences between the POC PFT techniques and in vivo conditions, including patient-to-patient variability. Important limitations of most tests include the use of citrate-anticoagulated blood. Citrate directly and irreversibly diminishes platelet function and even after recalcification, it may result in altered platelet aggregation in response to ADP, epinephrine or collagen, and interfere with thrombin generation from activated platelets. Furthermore, most tests do not employ flowing blood and therefore do not assess the effect of high shear forces on platelets that initiate, propagate and stabilize arterial thrombi. Finally, the effect of endogenous thrombolysis, due to fibrinolysis and dislodgement, which ultimately determines the outcome of a thrombotic stimulus, is mostly not assessed. In order to accurately reflect an individual’s predisposition to arterial thrombosis, future tests of thrombotic status which overcome these limitations should be used, to improve cardiovascular risk prediction and to guide pharmacotherapy.

Supraspinatus muscle shear wave elastography (SWE): detection of biomechanical differences with varying tendon quality prior to gray-scale morphologic changes

OBJECTIVE

The purpose of this study was to determine whether SWE can detect biomechanical changes in the supraspinatus muscle that occur with increasing supraspinatus tendon abnormality prior to morphologic gray-scale changes.

MATERIALS AND METHODS

An IRB approved, HIPAA compliant retrospective study of shoulder ultrasounds from 2013-2018 was performed. The cohort consisted of 88 patients (mean age 55 ± 15 years old) with 110 ultrasounds. Images were acquired in longitudinal orientation to the supraspinatus muscle with shear wave velocity (SWV) point quantification. The tendon and muscle were graded in order of increasing tendinosis/tear (1-4 scale) and increasing fatty infiltration (0-3 scale). Mixed model analysis of variance, analysis of covariance, and Spearman rank correlation were used for statistical analysis.

RESULTS

There was no statistically significant age or sex dependence for supraspinatus muscle SWV (p = 0.314, 0.118, respectively). There was no significant correlation between muscle SWV and muscle or tendon grade (p = 0.317, 0.691, respectively). In patients with morphologically normal muscle on gray-scale ultrasound, there were significant differences in muscle SWV when comparing tendon grade 3 with grades 1, 2, and 4 (p = 0.018, 0.025, 0.014, respectively), even when adjusting for gender and age (p = 0.044, 0.028, 0.018, respectively). Pairwise comparison of tendon grades other than those mentioned did not achieve statistical significance (p > 0.05).

CONCLUSION

SWE can detect biomechanical differences within the supraspinatus muscle that are not morphologically evident on gray-scale ultrasound. Specifically, supraspinatus tendon partial tears with moderate to severe tendinosis may correspond to biomechanically distinct muscle properties compared to both lower grades of tendon abnormality and full-thickness tears.

Strain of the facet joint capsule during rotation and translation range-of-motion tests: an in vitro porcine model as a human surrogate

BACKGROUND CONTEXT

Prior data about the modulating effects of lumbar spine posture on facet capsule strains are limited to small joint deviations. Knowledge of facet capsule strain during rotational and translational intervertebral joint motion (ie, large joint deviations) under physiological loading could be useful as it may help explain why visually normal lumbar spinal joints become painful.

PURPOSE

This study quantified the strain tensor of the facet capsule during rotation and translation range-of-motion tests.

STUDY DESIGN/SETTING

Strain was calculated in isolated porcine functional spinal units. Following a preload, each specimen underwent a flexion/extension rotation (F/E) followed by an anterior/posterior translation (A/P) range-of-motion test while under a 300 N compression load.

METHODS

Twenty porcine spinal units (10 C3-C4, 10 C5-C6) were tested. Joint flexion/extension was imposed by applying a ±8 Nm moment at a rate of 0.5°/s, and translation was facilitated by loading the caudal vertebra with a ±400 N shear force at a rate of 0.2 mm/s. Points were drawn on the exposed capsule surface and their coordinates were optically tracked throughout each test. Strain was calculated as the displacement of the point configuration with respect to the configuration in a neutral joint position.

RESULTS

Compared to a neutral posture, superior-inferior strain increased and decreased systematically during flexion and extension, respectively. Posterior displacement of the caudal vertebra by more than 1.3 mm was associated with negative strains, which was significantly lower than the +4.6% strain observed during anterior displacement (p≥.199). The shear strain associated with anterior translation was, on average, -1.1% compared to a neutral joint posture.

CONCLUSIONS

These results demonstrate that there is a combination of strain types within the facet capsule when spinal units are rotated and translated. The strains documented in this study did not reach the thresholds associated with nociception.

CLINICAL RELEVANCE

The magnitude of flexion-extension rotation and anterior-translation may glean insight into the facet capsule deformation response under low compression (300 N) loading scenarios. Further, intervertebral joint motion alone, even under low compression loading, does not appear to initiate a clinically relevant pain response in the lumbar facet capsule of a nondegenerated spinal joint.

Cartilage and collagen mechanics under large-strain shear within in vivo and at supraphysiogical temperatures

Human joints, particularly those of extremities, experience a significant range of temperatures in vivo. Joint temperature influences the mechanics of both joint and cartilage, and the mechanics of cartilage can affect the temperature of both joint and cartilage. Thermal treatments and tissue repairs, such as thermal chondroplasty, and ex vivo tissue engineering may also expose cartilage to supraphysiological temperatures. Furthermore, although cartilage undergoes principally compressive loads in vivo, shear strain plays a significant role at larger compressive strains. Thus, we aimed to determine whether and how the bulk mechanical responses of cartilage undergoing large-strain shear change (1) within the range of temperatures relevant in vivo, and (2) both during and after supraphysiological thermal treatments. We completed large-strain shear tests (10 and 15%) at four thermal conditions: 24^∘C and 40^∘C to span the in vivo range, and 70^∘C and 24^∘C repeated after 70^∘C to explore mechanics during and after potential treatments. We calculated the bulk mechanical responses (strain-energy dissipation densities, peak-to-peak shear stresses, and peak-effective shear moduli) as of function of temperature and used statistical methods to probe significant differences. To probe the mechanisms underlying differences we assessed specimens, principally the type II collagen, with imaging (second harmonic generation and transmission electron microscopies, and histology) and assessed the temperature-dependent mechanics of type II collagen molecules within cartilage using steered molecular dynamics simulations. Our results suggest that the bulk mechanical responses of cartilage depend significantly on temperature both within the in vivo range and at supraphysiological temperatures, showing significant reductions in all mechanical measures with increasing temperature. Using imaging and simulations we determined that one underlying mechanism explaining our results may be changes in the molecular deformation profiles of collagen molecules versus temperature, likely compounded at larger length scales. These new insights into the mechanics of cartilage and collagen may suggest new treatment targets for damaged or osteoarthritic cartilage.

Interpersonal differences in the friction response of skin relate to FTIR measures for skin lipids and hydration

Understanding the mechanical response of skin to contact is of importance when developing products that interact with the skin. The shear forces that arise due to friction in the interface are a key aspect of skin interactions, because shear is known to contribute to discomfort and tissue injury. However, the frictional response of skin shows large variations between people. It has been hypothesised that these variations relate to differences between people in the physiological properties of their skin, but the underlying mechanisms are not well understood. In order to gain new insights into these interpersonal differences in friction behaviour, in vivo FTIR measurements and in vivo friction measurements were performed on the same patch of skin. Quantitative analysis of the various peaks in the FTIR spectra provided information on the moisture content of the stratum corneum and the amount and mechanical properties of the lipids on the skin. The lipid viscosity, as characterised by the width of the 2920 cm^-1 peak, correlates with the friction, whilst, interestingly, no relationship was found between the quantity of lipids on the skin surface and the coefficient of friction. Additionally, and as expected, a fairly strong correlation was obtained between the moisture content, as characterised by the height of the Amide I peak and the coefficient of friction. The presented results show that spectroscopy techniques can be used in as a non-invasive method to identify people who may show elevated levels of friction and thus are at increased risk of developing shear induced tissue injury.

Non-uniformity of displacement and strain within the Achilles tendon is affected by joint angle configuration and differential muscle loading

Although the Achilles tendon (AT) has been studied for more than a century, a complete understanding of the mechanical and functional consequences of AT structural organization is currently lacking. The aim of this study was to assess how joint angle configuration affects subtendon displacement and strain of soleus (SOL) and lateral gastrocnemius (LG) muscles. Knots sutured onto SOL and LG subtendons of 12 Wistar rats, were videotaped to quantify displacements and the ankle torque was assessed for different isometric activation conditions (i.e., individual and simultaneous) of the triceps surae muscles. Changing ankle and knee joint angle affected the magnitude of displacement, relative displacement and strain of both SOL and LG subtendons. SOL subtendon behavior was not only affected by changes in ankle angle, but also by changes in knee angle. Displacement of SOL subtendon decreased (28-49%), but strain increased in response to knee extension. Independent of joint angle configuration, stimulation of any combination of the muscles typically resulted in displacements and strains of LG and SOL subtendons. Typically SOL displaced more but LG displaced more when stimulated at longer muscle lengths. Our results demonstrate that the distinct subtendons of the Achilles tendon can move and deform differently, but are not fully independent. Within the AT, there appears to be a precarious balance between sliding allowance and mechanical connectivity between subtendons.

Interfacial rheology and relaxation behavior of adsorption layers of the triterpenoid saponin Escin

HYPOTHESIS

Escin, a monodesmosidic triterpenoid saponin, was shown previously to form viscoelastic interfaces with a very high dilatational and surface shear storage modulus. This is expected to be due to the arrangement of Escin into 2D disordered soft viscoelastic solid interfacial structures, which results in turn in a distribution of relaxation times.

EXPERIMENTS

The responses to dilatational and surface shear deformations of Escin-stabilized air-water interfaces were studied, both in the linear viscoelastic (LVE) and non-linear (NLVE) regime. Step relaxation and amplitude sweeps were performed in dilatation experiments. For surface shear, amplitude sweeps and creep recovery experiments were performed.

FINDINGS

Escin stabilized-interfaces displayed a highly non-linear behavior in dilatation as seen in the Lissajous plots. In large oscillatory shear the Lissajous curves had a rhomboidal shape, indicating intracycle yielding and recovery, typical of glassy systems. The relaxation of the interface showed stretched exponential behavior, with stretched exponents typical of disordered solids with dynamic heterogeneity. The use of surface rheological measurements beyond the commonly measured LVE regime clearly has provided new insights into the behavior of these interfaces and their microstructure. These results highlight the need to reconsider other complex interfaces as disordered solids and not as 2D homogenous viscoelastic fluids.

Viscoelastic properties of the central region of porcine temporomandibular joint disc in shear stress-relaxation

In this study, shear relaxation properties of the porcine temporomandibular joint (TMJ) disc are investigated. Previous studies have shown that, in fatigue failure and damage of cartilage and fibrocartilage, shear loads could be one of the biggest contributors to the failure. The aim of the present study is to develop an evaluation method to study shear properties of the disc and to do a mathematical characterization of it. For the experiments, twelve porcine discs were used. Each disc was dissected from the TMJ and, then, static strain control tests were carried out to obtain the shear relaxation modulus for the central region of the discs. From the results, it was found that the disc presents a viscoelastic behavior under shear loads. Relaxation modulus decreased with time. Shear relaxation was 10% of the instantaneous stress, which implies that the viscous properties of the disc cannot be neglected. The present results lead to a better understanding of the discs mechanical behavior under realistic TMJ working conditions.

Shear bioreactors stimulating chondrocyte regeneration, a systematic review

It is commonly accepted that the mechanical stimuli are important factors in the maintenance of normal structure and function of the articular cartilage. Despite extensive efforts, the cellular mechanisms underlying the responses of articular chondrocytes to mechanical stresses are not well understood. In the present review, different types of shear bioreactor and potential mechanisms that mediate and regulate the effect of shear on chondrocyte are discussed.

For this review, the search of the literature was done in the PubMed, Scopus, Web of sciences databases to identify papers reporting data about shear on chondrocyte. Keywords “shear, chondrocyte, cartilage, bioreactor” were used. Studies published until the first of March 2018 were considered in this paper. The review focused on the experimental studies conducted the effect of shear stress on cartilage tissue in vivo and in vitro. In this review, both experimental studies referring to human and animal tissues were taken into account. The following articles were excluded: reviews, meta-analysis, duplicate records, letters, and papers that did not add significant information. Mechanism of shear stress on chondrocyte, briefly can be hypothesized as (1) altered expression of aggrecan and collagen type II, (2) altered cartilage oligomeric matrix protein (COMP) serum levels, consequently, organizing the arrangement binding of glycosaminoglycans, integrins, and collagen, (3) induction of apoptosis signals, (4) altered expression of integrin.

Why is the heel particularly vulnerable to pressure ulcers?

In this article, the vulnerability of the soft tissues of the heel to pressure ulcers (injuries) is explained from a biomechanical engineering perspective, and emerging technologies for protecting the heel, particularly low-friction garments, are reviewed. Sustained deformations in the soft tissue of the weight-bearing posterior heel cause progressive cell and tissue damage due to loss of homeostasis in the cells, as the cytoskeleton and plasma membranes of the affected cells lose integrity and functionality. This deformation damage onsets and evolves rapidly when there is no relief of the tissue distortion (e.g. in supine motionless lying). Hence, prevention should be timely and be applied across all patient populations that are at risk. In particular there is a need to protect tissues from the action of frictional forces that are shearing not only the skin but also the deep tissue structures of the heel. The internal anatomy and physiology of the posterior heel, the common hospital conditions (lying supine, head of the bed elevated) and medical conditions involving neuropathy and perfusion impairments may impose specific risk for heel (pressure) ulcers. There is growing evidence that low-friction-fabric garments may provide added benefits in preventing heel ulcers when used in addition to standard clinical and technology-supported pressure ulcer prevention strategies, as the low-friction fabric structures absorb frictional forces before these are able to considerably distort the susceptible heel tissues.

Understanding the role of air and protein phase on mechanical anisotropy of calcium caseinate fibers

Calcium caseinate dispersions can be transformed into anisotropic, fibrous materials using the concept of shear-induced structuring. The aim of this study is to further investigate the relative importance of air bubbles and protein on the mechanical anisotropy of calcium caseinate material. In this study, the effect of air on mechanical anisotropy of these fibrous materials was described with a load-bearing model, with the void fraction, and the bubble length and width as input parameters. The anisotropy of the protein phase was estimated using materials obtained from deaerated dispersions after shearing at different shear rates. We concluded that the deformation of air bubbles can only partly explain the mechanical anisotropy; the anisotropy of the protein phase is more important. Based on all results, we further concluded that the anisotropy of the protein phase was affected by the air bubbles present during the structuring process. This effect was explained by locally higher shear rate in the protein matrix during the structuring process.

Neutron diffraction of deuterated tripalmitin and the influence of shear on its crystallisation

This neutron diffraction study of deuterated tripalmitin has provided further insight into a forensic observation of the crystallisation of lipids under high-shear conditions. To achieve this, an experimental set up was designed to enable simultaneous rheological data from a Couette cell to be recorded with neutron powder diffraction, enabling the influence of shear on the polymorph transformation on cooling to be monitored in real time. Tripalmitin was observed to directly transform from a liquid phase to a β polymorph under the influence of shear. Although the liquid to β transition was not observed to be influenced by shear rate, the degree of crystallinity, qualitatively denoted by an increase in the sharpness of the diffraction peaks, was observed at higher shear rates. Evidence is also presented that the rate of cooling influences the ordering in the β-polymorph produced in zero shear conditions.

Optimal hydraulic shear strength and mechanism of activated sludge floc re-growth after breakage

In order to evaluate the effects of hydraulic shearing action on activated sludge floc aggregation, floc aggregation, breakage and re-growth performances under different shear strengths were systematically examined. Performances were evaluated by measuring the floc size variations using a laser particle size analyser on-line monitoring technique. The flocs after breakage were characterised by investigating the composition of extracellular polymer substances (EPS), floc size, substances released due to surface erosion and chemical structures using Fourier transform infrared spectroscopy (FTIR) to clarify the breakage model and re-growth mechanism. The results showed that activated sludge flocs broken at a hydraulic shear strength GT value (the product of the velocity gradient and time) of 56,280 exhibited enhanced re-growth performance compared with the control. The substances released from sludge increased with shear strength, indicating that the floc breakage mode gradually transitioned from fragmentation to surface erosion. FTIR revealed that, after breakage, the spectrum of loosely bound EPS in sludge tended to be similar to that of tightly bound EPS. The results suggest that the breakage of activated sludge flocs under moderate hydraulic shear strength can fragment flocs into smaller particles without surface erosion and promote the exposure of inner tightly bound EPS, thereby improving re-growth performance.

Enhancement of Tissue Factor Expression in Monocyte-Derived Dendritic Cells by Pentraxin 3 and Its Modulation by C1 Esterase Inhibitor

BACKGROUND

We have previously shown that human monocyte-derived dendritic cells (moDCs) may participate in immune system-mediated hypercoagulable state through enhanced tissue factor (TF) expression and that the complement system may be involved in this process.

OBJECTIVES

The aim of this study was to explore the role of pentraxin 3 (PTX3) and the complement system in enhanced TF expression in moDCs.

METHODS

moDCs were generated from isolated human monocytes. PTX3 levels in whole human blood supplemented with moDCs were determined after lipopolysaccharide (LPS) stimulation. PTX3 release by the generated moDCs upon LPS stimulation was also assessed. The effect of PTX3 on whole blood coagulation was investigated using thromboelastometric analysis. TF expression in stationary moDCs treated with LPS and/or PTX3 was determined by measuring TF activity. The effect of complement inhibitors on TF activity in moDCs treated with LPS and/or PTX3 under low-shear conditions was evaluated.

RESULTS

PTX3 levels were higher in whole blood supplemented with moDCs than in the presence of monocytes and were further elevated by LPS stimulation. PTX3 release from generated moDCs was also increased by LPS stimulation. PTX3 reduced whole blood coagulation time in a dose-dependent manner. However, PTX3 did not increase TF expression in stationary moDCs. Under low-shear conditions, PTX3 increased TF expression in moDCs. C1 esterase inhibitor (C1-inh) suppressed this effect.

CONCLUSIONS

PTX3 might have a thrombophilic activity and enhance TF expression in moDCs under low-shear conditions. Furthermore, suppression of moDC-associated hypercoagulability by C1-inh might be partly ascribed to its inhibitory effect on PTX3.