1
|
Unraveling the Np(V) sorption on ZrO 2: A batch, spectroscopic and modeling combined approach. JOURNAL OF HAZARDOUS MATERIALS 2024; 461:132168. [PMID: 37742379 DOI: 10.1016/j.jhazmat.2023.132168] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/28/2023] [Revised: 07/25/2023] [Accepted: 07/26/2023] [Indexed: 09/26/2023]
Abstract
The interactions of the long-lived actinide neptunium with the corrosion product zirconia (ZrO2) have to be considered in the safety assessment of a repository for radioactive waste. The sorption of Np(V) on ZrO2 was investigated in the absence of carbonate at the macroscopic and molecular scale. At the macroscopic level, the Np(V) uptake was independent of ionic strength and the isoelectric point of the pristine zirconia was increased, both suggesting the presence of inner-sphere Np(V) surface complexes. The Np(V) sorption isotherms indicated the presence of strong and weak sorption sites. Molecular level information were derived from in situ attenuated total reflection Fourier-transform infrared spectroscopy and extended X-ray absorption fine structure spectroscopy (EXAFS), which confirmed the presence of Np(V) inner-sphere complexes. EXAFS experiments revealed the formation of a bidentate inner-sphere surface complex in the weak sorption site regime. The derived information at the macroscopic and molecular levels were used to parametrize a charge distribution multi-site complexation (CD-MUSIC) model. The derived thermodynamic constants can help to better predict the environmental fate of Np(V) in the context of nuclear waste repository assessments and can also support the appraisal of safety-relevant scenarios for the extended interim storage of spent nuclear fuel.
Collapse
|
2
|
Eu(III) and Am(III) adsorption on aluminum (hydr)oxide minerals: surface complexation modeling. GEOCHEMICAL TRANSACTIONS 2023; 24:2. [PMID: 37340139 DOI: 10.1186/s12932-023-00081-5] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/13/2022] [Accepted: 05/23/2023] [Indexed: 06/22/2023]
Abstract
Americium is a highly radioactive actinide element found in used nuclear fuel. Its adsorption on aluminum (hydr)oxide minerals is important to study for at least two reasons: (i) aluminum (hydr)oxide minerals are ubiquitous in the subsurface environment and (ii) bentonite clays, which are proposed engineered barriers for the geologic disposal of used nuclear fuel, have the same ≡AlOH sites as aluminum (hydr)oxide minerals. Surface complexation modeling is widely used to interpret the adsorption behavior of heavy metals on mineral surfaces. While americium sorption is understudied, multiple adsorption studies for europium, a chemical analog, are available. In this study we compiled data describing Eu(III) adsorption on three aluminum (hydr)oxide minerals-corundum (α-Al2O3), γ-alumina (γ-Al2O3) and gibbsite (γ-Al(OH)3)-and developed surface complexation models for Eu(III) adsorption on these minerals by employing diffuse double layer (DDL) and charge distribution multisite complexation (CD-MUSIC) electrostatic frameworks. We also developed surface complexation models for Am(III) adsorption on corundum (α-Al2O3) and γ-alumina (γ-Al2O3) by employing a limited number of Am(III) adsorption data sourced from literature. For corundum and γ-alumina, two different adsorbed Eu(III) species, one each for strong and weak sites, were found to be important regardless of which electrostatic framework was used. The formation constant of the weak site species was almost 10,000 times weaker than the formation constant for the corresponding strong site species. For gibbsite, two different adsorbed Eu(III) species formed on the single available site type and were important for the DDL model, whereas the best-fit CD-MUSIC model for Eu(III)-gibbsite system required only one Eu(III) surface species. The Am(III)-corundum model based on the CD-MUSIC framework had the same set of surface species as the Eu(III)-corundum model. However, the log K values of the surface reactions were different. The best-fit Am(III)-corundum model based on the DDL framework had only one site type. Both the CD-MUSIC and the DDL model developed for Am(III)-γ-alumina system only comprised of one site type and the formation constant of the corresponding surface species was ~ 500 times stronger and ~ 700 times weaker than the corresponding Eu(III) species on the weak and the strong sites, respectively. The CD-MUSIC model for corundum and both the DDL and the CD-MUSIC models for γ-alumina predicted the Am(III) adsorption data very well, whereas the DDL model for corundum overpredicted the Am(III) adsorption data. The root mean square of errors of the DDL and CD-MUSIC models developed in this study were smaller than those of two previously-published models describing Am(III)-γ-alumina system, indicating the better predictive capacity of our models. Overall, our results suggest that using Eu(III) as an analog for Am(III) is practical approach for predicting Am(III) adsorption onto well-characterized minerals.
Collapse
|
3
|
Prediction of alkaline earth metal ion adsorption on goethite for various background electrolytes with the CD-MUSIC model. THE SCIENCE OF THE TOTAL ENVIRONMENT 2023:164462. [PMID: 37263441 DOI: 10.1016/j.scitotenv.2023.164462] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Subscribe] [Scholar Register] [Received: 01/22/2023] [Revised: 05/22/2023] [Accepted: 05/23/2023] [Indexed: 06/03/2023]
Abstract
As water scarcity drives the use of more saline water sources, contaminant fate and transport models must capture the impact of high concentrations of alkaline earth metal ions (AEMs) and background electrolytes in these more complex waters. By utilizing macroscopic adsorption data from various electrolyte systems, a Charge Distribution - Multisite Complexation (CD-MUSIC) model, capable of incorporating electrolyte adsorption, was able to accurately simulate the adsorption behavior of alkaline earth metal ions onto goethite. The modeling effort was guided by previous spectroscopic and surface complexation modeling of alkaline earth metal adsorption and built on previous CD-MUSIC modeling that accounted for changes in crystal face contributions to the surface site density as a function of specific surface area. The model was constrained to consider only two dominant surface complex species for each metal ion adsorption reaction. These two species were selected from 44 possible species through objective curve fitting of single-solute macroscopic adsorption data. While most of the alkaline earth metal surface complexes formed outer-sphere complexes at the goethite surface, an inner-sphere species was utilized for Mg2+. With the surface complex species and equilibrium constants obtained from this study, the calibrated model successfully predicted alkaline earth metal ion adsorption over a wide range of solution and surface conditions; the model predictions encompassed a wide range of pH (5-11), solute/solid ratio (1.37 × 10-5-8.33 × 10-4 mol-solute/g-solid), ionic strengths (0.01 M - 0.7 M), and background electrolytes (Na+, Cs+, Rb+, Cl-, and NO3-) using the same crystal face contribution methodology for site density, capacitance values, and surface acidity constants adopted for proton and cadmium adsorption in previous work (Han and Katz, 2019). Model simulations for a range of background water chemistries demonstrated the potential for Mg2+ to reduce Cd2+ adsorption to goethite in model seawater and oil- and gas-produced waters.
Collapse
|
4
|
Modeling and spectroscopic investigation of U(VI) removal on porous amidoxime-functionalized metal organic framework derived from macromolecular carbohydrate. Int J Biol Macromol 2023:125043. [PMID: 37224909 DOI: 10.1016/j.ijbiomac.2023.125043] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/04/2023] [Revised: 05/18/2023] [Accepted: 05/21/2023] [Indexed: 05/26/2023]
Abstract
The investigation of interaction mechanism of U(VI) selective removal on amidoxime-functionalized metal organic framework (i.e., UiO-66(Zr)-AO) derived from macromolecular carbohydrate is conducive to apply metal organic frameworks in actual environmental remediation. The batch experiments showed that UiO-66(Zr)-AO displayed the fast removal rate (equilibrium time of 0.5 h), high adsorption capacity (384.6 mg/g), excellent regeneration performance (<10 % decrease after three cycles) towards U(VI) removal due to the unprecedented chemical stability, large surface area and simple fabrication. U(VI) removal at different pH can be satisfactorily fitted by diffuse layer modeling with cation exchange at low pH and an inner-sphere surface complexation at high pH. The inner-sphere surface complexation was further demonstrated by X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) analysis. These findings revealed that UiO-66(Zr)-AO can be an effective adsorbent to remove the radionuclides from aqueous solution, which is crucial for recycling of uranium resource and decreasing the uranium harm to the environment.
Collapse
|
5
|
Estimation of phosphate extractability in flooded soils: Effect of solid-solution ratio and bicarbonate concentration. CHEMOSPHERE 2022; 303:135188. [PMID: 35660054 DOI: 10.1016/j.chemosphere.2022.135188] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/25/2022] [Revised: 05/25/2022] [Accepted: 05/29/2022] [Indexed: 06/15/2023]
Abstract
The Olsen method is widely used to determine bioavailable phosphate (P) in upland soils. It is also used in flooded soils, although different estimates of extractable-P are obtained under anoxic and oxic conditions. In this study, variations in extractable-P in three soils under different redox conditions were evaluated as a function of solid to solution ratio (SSR) (1:5-1:200) and bicarbonate concentration (0.1-1 M). The parameterized CD-MUSIC model was used to describe the data, with optimization of reactive surface area (RSA) and reversibly adsorbed-P (R-PO4). The RSA may vary due to the reductive dissolution of iron minerals and/or the formation of new reactive surfaces upon the establishment of reducing conditions. Changes in SSR and bicarbonate concentration significantly affected extractable-P under both oxic and anoxic conditions; more P was extracted under anoxic than under oxic conditions. The difference was 1.5-2 times greater for the highest SSR considered. In the soil samples with higher organic carbon content, the effect of bicarbonate concentration on extractable-P was remarkable. The large differences in extractable-P under oxic and anoxic conditions were probably due to differences in iron (hydr)oxide content. The CD-MUSIC model successfully predicted the effect of SSR on extractable-P under both conditions. R-PO4 data were fitted for oxic conditions and assumed unchanged for anoxic samples, while RSA data were fitted for both conditions. The RSA values were lower in anoxic than in oxic samples. Overall, our data and model calculations indicate that using wet soil samples obtained in-situ for evaluation of Olsen-P in submerged soils lead to a higher estimation of extractable-P than estimated in oxic soils. If soil testing in the presence of target plants confirms the reliability of in-situ sampling for Olsen-P estimation, the P fertilizer dose applied to submerged soils could be reduced, which is very important from environmental and economic perspectives.
Collapse
|
6
|
Thermodynamic and kinetic coupling modeling for thallium(I) sorption at a heterogeneous titanium dioxide interface. JOURNAL OF HAZARDOUS MATERIALS 2022; 428:128230. [PMID: 35030487 DOI: 10.1016/j.jhazmat.2022.128230] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/22/2021] [Revised: 12/24/2021] [Accepted: 01/05/2022] [Indexed: 06/14/2023]
Abstract
The transformations of monovalent thallium (Tl) in an aqueous environment may be affected significantly by Tl(I) partitioning at the solid-water interface during sorption. Models used to quantify the kinetics of Tl(I) adsorption on heterogeneous adsorbents and formation of multiple complexes under a wide range of water chemistry conditions can accurately predict the environmental fate of thallium. In this study, Tl(I) sorption on representative titanium dioxide at different solution pH values and loading concentrations was investigated with two unified adsorption models, diffuse layer modeling and kinetics modeling. Three Tl(I) surface complexes, TiOTl, TiOHTl+, and TiOTlOH-, were used in the diffuse layer model and successfully described batch adsorption and the results of spectroscopic analyses. The contribution of TiOHTl+ to the adsorption capacity was much higher than those of TiOTl and TiOTlOH- under neutral and weakly alkaline conditions, while the species TiOTlOH- predominated among Tl(I) complexes in strongly alkaline environments. The adsorption and desorption rate coefficients derived from thermodynamics and kinetics coupling modeling suggested the influence of different complex characteristics on adsorption and desorption of Tl(I). Our results provide a comprehensive model for predicting the dynamic binding behavior of Tl at heterogeneous solid-water interfaces.
Collapse
|
7
|
Electrokinetic behavior of artificial and natural calcites: A review of experimental measurements and surface complexation models. Adv Colloid Interface Sci 2022; 301:102600. [PMID: 35065336 DOI: 10.1016/j.cis.2022.102600] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/03/2021] [Revised: 01/06/2022] [Accepted: 01/09/2022] [Indexed: 11/28/2022]
Abstract
The surface charge of calcite in aqueous environments is essential to many industrial and environmental applications. Electrokinetic measurements are usually used to assess the calcite charging behavior and characterize its electrical double layer (EDL). Numerous surface complexation models (SCMs) have been proposed to interpret the effect of different surface interactions on the zeta potential. Because of their versatility, SCMs have also become important tools in reactive transport modeling. The research on enhanced oil recovery within the last decade has led to an increased number of publications reporting both zeta potential measurements and SCMs for calcite. Nonetheless, the measurements are often inconsistent and the reasons for choosing one model over another are unclear. In this work, we review the models proposed for calcite and address their main differences. We first collect a large number of published zeta potential measurements and then we fit a Diffuse Layer, Basic Stern, and Charge-Distribution Multi-Site Complexation models to a selected reliable dataset. For each model, we maintain a similar number of adjustable parameters. After optimizing the parameters of the models, we systematically compare their prediction capabilities against data obtained in monovalent and divalent electrolyte systems containing calcium, magnesium, sulfate, or carbonate. We show that, often, the discrepancies between the models and the experimental data can be explained by different levels of disequilibrium. Nonetheless, assumptions used in the development of the models may significantly reduce their extrapolability to variable chemical conditions. The poor agreement between the models tuned to electrokinetic data with surface charge measurements and dynamic retention from single-phase flowthrough tests show that zeta potential may not be the best type of data to characterize ion binding at the calcite surface. Including the effect of mineral impurities and temperature on the calcite surface speciation and electrokinetic behavior prevail as main challenges for reactive transport modeling.
Collapse
|
8
|
New insights into U(VI) sorption onto montmorillonite from batch sorption and spectroscopic studies at increased ionic strength. THE SCIENCE OF THE TOTAL ENVIRONMENT 2022; 806:150653. [PMID: 34597569 DOI: 10.1016/j.scitotenv.2021.150653] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/06/2021] [Revised: 09/06/2021] [Accepted: 09/24/2021] [Indexed: 06/13/2023]
Abstract
The influence of ionic strength up to 3 mol kg-1 (background electrolytes NaCl or CaCl2) on U(VI) sorption onto montmorillonite was investigated as function of pHc in absence and presence of CO2. A multi-method approach combined batch sorption experiments with spectroscopic methods (time-resolved laser-induced fluorescence spectroscopy (TRLFS) and in situ attenuated total reflection Fourier-transform infrared spectroscopy (ATR FT-IR)). In the absence of atmospheric carbonate, U(VI) sorption was nearly 99% above pHc 6 in both NaCl and CaCl2 and no significant effect of ionic strength was found. At lower pH, cation exchange was strongly reduced with increasing ionic strength. In the presence of carbonate, U(VI) sorption was reduced above pHc 7.5 in NaCl and pHc 6 in CaCl2 system due to formation of aqueous UO2(CO3)x(2-2x) and Ca2UO2(CO3)3 complexes, respectively, as verified by TRLFS. A significant ionic strength effect was observed due to the formation of Ca2UO2(CO3)3(aq), which strongly decreases U(VI) sorption with increasing ionic strength. The joint analysis of determined sorption data together with literature data (giving a total of 213 experimental data points) allowed to derive a consistent set of surface complexation reactions and constants based on the 2SPNE SC/CE approach, yielding log K°≡SSOUO2+ = 2.42 ± 0.04, log K°≡SSOUO2OH = -4.49 ± 0.7, and log K°≡SSOUO2(OH)32- = -20.5 ± 0.4. Ternary uranyl carbonate surface complexes were not required to describe the data. With this reduced set of surface complexes, an improved robust sorption model was obtained covering a broad variety of geochemical settings over wide ranges of ionic strengths and groundwater compositions, which subsequently was validated by an independent original dataset. This model improves the understanding of U(VI) retention by clay minerals and enables now predictive modeling of U(VI) sorption processes in complex clay rich natural environments.
Collapse
|
9
|
The effect of porewater ionic composition on arsenate adsorption to clay minerals. THE SCIENCE OF THE TOTAL ENVIRONMENT 2021; 785:147096. [PMID: 33932669 DOI: 10.1016/j.scitotenv.2021.147096] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/21/2020] [Revised: 04/07/2021] [Accepted: 04/08/2021] [Indexed: 06/12/2023]
Abstract
Adsorption of arsenate on clay minerals can control the partitioning and mobility of arsenic and subsequent contamination of groundwater. While the effect of ionic strength on arsenic adsorption to phyllosilicate minerals has been evaluated for various clay minerals, the specific ionic composition of the surrounding porewater can play a critical role in promoting adsorption (or desorption) of arsenate (HxAsO4x-4). We conducted a series of adsorption isotherms to evaluate the adsorption of arsenate to various phyllosilicates in the presence of monovalent (K+), divalent (Mg2+, Ca2+), and trivalent (La3+) cations while maintaining constant ionic strength and pH. Adsorption isotherms were combined with surface complexation modeling to examine retention processes of arsenate as a function of ionic composition in the surrounding solution. The higher charge density of greater valent cations results in stronger outer-sphere bridging complexes between negatively charged phyllosilicate mineral surfaces and negatively charged arsenate oxyanions. Higher valent cations thus enhance the propensity for arsenate adsorption on phyllosilicate minerals. We further deciphered surface complexation processes by conducting adsorption isotherms on various clay minerals including smectite, illite, and pyrophyllite to evaluate the role of interlayer, permanent charge, and terminal edge sites. We conclude that arsenate is most likely retained largely on the planar surface where structural negative charge emanates allowing cation bridging complexes to develop. Our findings illustrate that clay mineralogy of soils and sediments can combine with porewater ionic composition (and specifically the proportion of divalent cations) to describe arsenic transport, particularly in iron- or aluminum-oxide poor systems.
Collapse
|
10
|
Application of surface complexation modeling on adsorption of uranium at water-solid interface: A review. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2021; 278:116861. [PMID: 33714063 DOI: 10.1016/j.envpol.2021.116861] [Citation(s) in RCA: 21] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/22/2020] [Revised: 01/17/2021] [Accepted: 02/28/2021] [Indexed: 06/12/2023]
Abstract
Precise prediction of uranium adsorption at water-mineral interface is of great significance for the safe disposal of radionuclides in geologic environments. Surface complexation modeling (SCM) as a very useful tool has been extensively investigated for simulating adsorption behavior of metals/metalloids at water-mineral interface. Numerous studies concerning the fitting of uranium adsorption on various adsorbents using SCM are well documented, but the systematic and comprehensive review of uranium adsorption using various SCM is not available. In this review, we briefly summarized the rationale of SCM, including constant-capacitance-model (CCM), diffuse-layer-model (DLM), triple-layer-model (TLM); The recent progress in the application of SCM on the fitting of uranium adsorption towards metal (hydr)oxides, clay minerals and soil/sediments was reviewed in details. This review hopefully provides the beneficial guidelines for predicting the transport and fate of uranium in geologic environments beyond laboratory timescales.
Collapse
|
11
|
Geochemical behaviour of heavy metals in sludge effluents and solid deposits on the Zambian Copperbelt: Implication for effluent treatment and sludge reuse. THE SCIENCE OF THE TOTAL ENVIRONMENT 2021; 769:144342. [PMID: 33477054 DOI: 10.1016/j.scitotenv.2020.144342] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/06/2020] [Revised: 11/19/2020] [Accepted: 12/05/2020] [Indexed: 06/12/2023]
Abstract
Sludge effluents and solid deposits generated from the conventional lime treatment processes on the Zambian Copperbelt have led to reports of copper (Cu) and cobalt (Co) contamination into the nearby water bodies. To better understand the behaviour of the metals; partitioning, adsorption and their specific binding forms were studied through sequential extraction, batch adsorption experiments and surface complexation modeling (SCM). Results of mineral composition analyses indicated that micas, kaolinite, quartz and feldspar are abundant with hydrous ferric oxide (HFO) precipitates that formed as a result of the weathering of biotite grains existing as grain surface coating. Sequential extractionrevealed that Cu and Co metals are partitioned in the order of: exchangeable (F1: 600-1500 mg/kg Cu; 100-200 mg/kg Co), acid-soluble (F2: 2200-5500 mg/kg Cu; 190-220 mg/kg Co) and reducible fraction (F3: 2200-5500 mg/kg Cu; 260-300 mg/kg Co). Metals in F1 are hosted by kaolinite, F2 by both kaolinite and HFO whereas in F3 by dominantly HFO. Equal Cu concentration between F2 and F3 is due to both the limited amount of HFO (i.e. 5-10 g/kg) and desorption of loosely adsorbed Cu and Co metals to HFO surfaces. Batch adsorption experiments revealed adsorption as the dominant metal retention mechanism. According to modeling predictions, HFO sites are the dominant metal adsorption sites. At HFO site; >(s)FeOCo+, Co showed adsorption decrease from 40% in single system to 25% in binary system between pH 7 - 7.5 due to metal competition for adsorption sites. The high Cu concentration (i.e. 0.5-1.1% Cu) displaced low Co (i.e. 0.03-0.07% Co) concentration from the adsorption sites present in sludge, thus rendering Co mobile into the environment. To keep the adsorbed metals stable from release, optimal pH of 7.5 is suggested during treatment with lime. At this optimal pH, metals are decreased to below the regulation standard values and with less generation of voluminous sludge. Adsorbed Cu and Co can be recoverable from sludge through acid treatment at pH <3 based on sequential extraction results. The resultant metal-free sludge material has potential of been used as aggregate in construction.
Collapse
|
12
|
Probing and understanding interaction of Eu(III) with γ- alumina in presenceof malonic acid. J Environ Sci (China) 2021; 100:181-192. [PMID: 33279031 DOI: 10.1016/j.jes.2020.07.020] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/23/2020] [Revised: 07/17/2020] [Accepted: 07/18/2020] [Indexed: 06/12/2023]
Abstract
Radionuclide migration in aquatic environment is influenced by its sorption onto colloids/mineral oxides and the presence of organic complexing anions. With a view to understand the sorption of trivalent actinides by mineral oxides in presence of organic acid, in the present study, Eu(III), malonic acid (MA) and γ-alumina are considered as representatives of trivalent actinides, low molecular weight natural occurring organic acid and aluminol sites, respectively. The influence of MA on sorption of Eu(III) by γ-alumina was elucidated by batch sorption, spectroscopic techniques and surface complexation modeling, for the first time. Attenuated Total Reflection-Fourier Transform Infrared spectroscopic studies of MA sorbed on γ-alumina revealed the presence of two inner-sphere surface complexes. Batch sorption for binary (alumina-Eu(III)) and ternary (alumina-Eu(III)-MA) systems were investigated as a function of pH, Eu(III) concentration and sequential addition of Eu(III)/MA. The pH edge for Eu(III) sorption shifts to higher pH with increasing Eu(III) concentration. In ternary systems, Eu(III) sorption is significantly enhanced at pH < 4.5. Eu(III) speciation on γ-alumina is independent of addition sequence of Eu(III)/MA. Time resolved fluorescence spectroscopy of Eu(III) sorbed on γ-alumina exhibited two surface species, XOEu2+ and (YO)2Eu+. The enhancement in I616/I592 and lifetime for ternary systems, as compared to binary system, at low pH, indicates the participation of Eu-MA complexes in the formation of surface species in ternary systems. The diffuse layer model has been employed to successfully model the experimental sorption profiles of binary and ternary systems, using code FITEQL 4.0, by considering the surface species identified by spectroscopic techniques.
Collapse
|
13
|
Modeling the effects of humic acid and anoxic condition on phosphate adsorption onto goethite. CHEMOSPHERE 2020; 253:126691. [PMID: 32294599 DOI: 10.1016/j.chemosphere.2020.126691] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/28/2019] [Revised: 03/29/2020] [Accepted: 04/01/2020] [Indexed: 06/11/2023]
Abstract
Low redox potential in flooded soils may affect phosphate bioavailability by reducing iron oxides or formation of new minerals. To investigate phosphate behavior in anoxic conditions, goethite was selected as a soil model and coated by humic acid (HA) and sodium borohydride was used as a reducing agent. Adsorption experiments were conducted in 0.1 M NaNO3 as a function of pH in oxic (Eh = +254 to +448 mV) and suboxic (Eh = -162 to +167 mV) conditions for four phosphate concentrations (0.05-0.8 mM). CD-MUSIC and NOM-CD models in combination with Extended Stern model were used to describe the experimental data. Results show that by increasing pH and carbon content in the organo-mineral composites, the released phosphate to the solution increases in both oxic and suboxic conditions. In suboxic conditions, as a result of sodium borohydride dissociation in water and consequently boron release to the solution, at high loading of boron and low loading of phosphate, boron can compete with phosphate for the surface reactive sites and decrease its adsorption. On the other hand, ferrous iron can attenuate boron effect and promote phosphate adsorption. The results indicated that goethite surface is resistant to the reductive transformation that may occur at relatively low redox potential due to its high crystalline character and thermodynamic stability. HA may, however, promote the formation of amorphous iron phases, which consequently might induce phosphate adsorption in OM-mineral composites. The derived affinity constants in oxic conditions described the experimental data of suboxic conditions reasonably well.
Collapse
|
14
|
Effect of DTPA on europium sorption onto quartz - Batch sorption experiments and surface complexation modeling. CHEMOSPHERE 2020; 239:124771. [PMID: 31520970 DOI: 10.1016/j.chemosphere.2019.124771] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/11/2019] [Revised: 08/22/2019] [Accepted: 09/04/2019] [Indexed: 06/10/2023]
Abstract
Sorption of radionuclides on mineral surfaces retards their migration in the environment of a repository. Presence of organic ligands, however, affects sorption and consequently influences their transport behavior. In this study, we quantify the sorption of Eu(III) onto quartz surfaces as a function of pH in the absence and presence of diethylenetriaminepentaacetic acid (DTPA). Batch sorption experiments show a pH-dependent sorption of Eu(III) on quartz. The presence of DTPA results in slightly higher sorption of Eu(III) at neutral to slightly acidic pH and considerably lower sorption at alkaline conditions. Sorption experiments were simulated using the Diffuse Double Layer Model (DDLM) with single sorption sites (≡QOH) and monodentate surface complexation. The reactions were established based on the aqueous speciation calculation under the experimental conditions, and the thermodynamic constants of surface reactions were obtained and refined by numerical optimization. Results of surface complexation modeling show the formation of a surface species ≡QOHEuDTPA2-, explaining the elevated sorption of Eu(III) at neutral to slightly acidic pH. In contrast, dissolved EuDTPA2- complex species are present at alkaline pH, resulting in an enhanced mobility of Eu(III).
Collapse
|
15
|
Uncertainty and variability in laboratory derived sorption parameters of sediments from a uranium in situ recovery site. JOURNAL OF CONTAMINANT HYDROLOGY 2018; 213:28-39. [PMID: 29691066 DOI: 10.1016/j.jconhyd.2018.04.001] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/07/2017] [Revised: 03/04/2018] [Accepted: 04/16/2018] [Indexed: 06/08/2023]
Abstract
This research assesses the ability of a GC SCM to simulate uranium transport under variable geochemical conditions typically encountered at uranium in-situ recovery (ISR) sites. Sediment was taken from a monitoring well at the SRH site at depths 192 and 193 m below ground and characterized by XRD, XRF, TOC, and BET. Duplicate column studies on the different sediment depths, were flushed with synthesized restoration waters at two different alkalinities (160 mg/l CaCO3 and 360 mg/l CaCO3) to study the effect of alkalinity on uranium mobility. Uranium breakthrough occurred 25% - 30% earlier in columns with 360 mg/l CaCO3 over columns fed with 160 mg/l CaCO3 influent water. A parameter estimation program (PEST) was coupled to PHREEQC to derive site densities from experimental data. Significant parameter fittings were produced for all models, demonstrating that the GC SCM approach can model the impact of carbonate on uranium in flow systems. Derived site densities for the two sediment depths were between 141 and 178 μmol-sites/kg-soil, demonstrating similar sorption capacities despite heterogeneity in sediment mineralogy. Model sensitivity to alkalinity and pH was shown to be moderate compared to fitted site densities, when calcite saturation was allowed to equilibrate. Calcite kinetics emerged as a potential source of error when fitting parameters in flow conditions. Fitted results were compared to data from previous batch and column studies completed on sediments from the Smith-Ranch Highland (SRH) site, to assess variability in derived parameters. Parameters from batch experiments were lower by a factor of 1.1 to 3.4 compared to column studies completed on the same sediments. The difference was attributed to errors in solid-solution ratios and the impact of calcite dissolution in batch experiments. Column studies conducted at two different laboratories showed almost an order of magnitude difference in fitted site densities suggesting that experimental methodology may play a bigger role in column sorption behavior than actual sediment heterogeneity. Our results demonstrate the necessity for ISR sites to remove residual pCO2 and equilibrate restoration water with background geochemistry to reduce uranium mobility. In addition, the observed variability between fitted parameters on the same sediments highlights the need to provide standardized guidelines and methodology for regulators and industry when the GC SCM approach is used for ISR risk assessments.
Collapse
|
16
|
An X-ray absorption fine structure spectroscopy study of metal sorption to graphene oxide. J Colloid Interface Sci 2017; 508:75-86. [PMID: 28822863 DOI: 10.1016/j.jcis.2017.08.040] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/19/2017] [Revised: 07/24/2017] [Accepted: 08/12/2017] [Indexed: 01/20/2023]
Abstract
Remediation and prevention of environmental contamination by toxic metals is an ongoing issue. Additionally, improving water filtration systems is necessary to prevent toxic metals from circulating through the water supply. Graphene oxide (GO) is a highly sorptive material for a variety of heavy metals under different ionic strength conditions over a wide pH range, making it a promising candidate for use in metal adsorption from contaminated sites or in filtration systems. We present X-ray absorption fine structure (XAFS) spectroscopy results investigating the binding environment of Cd (II), U(VI) and Pb(II) ions onto multi-layered graphene oxide (MLGO). This study shows that the binding environment of each metal onto the MLGO is unique, with different behaviors governing the sorption as a function of pH. For Cd sorption to MLGO, the same mechanism of electrostatic attraction between the MLGO and the Cd+2 ions surrounded by water molecules prevails over the entire pH range studied. The U(VI), present in solution as the uranyl ion, shows only subtle changes as a function of pH, likely due to the varied speciation of uranium in solution. The adsorption of the U to the MLGO is through a covalent, inner-sphere bond. The only metal from this study where the dominant adsorption mechanism to the MLGO changes with pH is Pb. In this case, under lower pH conditions, Pb is bound onto the MLGO through dominantly outer-sphere, electrostatic adsorption, while under higher pH conditions, the bonding changes to be dominated by inner-sphere, covalent adsorption. Since each of the metals in this study show unique binding properties, it is possible that MLGO could be engineered to effectively adsorb specific metal ions from solution and optimize environmental remediation or filtration for each metal.
Collapse
|
17
|
Effect of glutamic acid on copper sorption onto kaolinite - Batch experiments and surface complexation modeling. CHEMOSPHERE 2017; 178:277-281. [PMID: 28334668 DOI: 10.1016/j.chemosphere.2017.03.073] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/13/2017] [Revised: 03/15/2017] [Accepted: 03/16/2017] [Indexed: 06/06/2023]
Abstract
High carbonate content of the European Kupferschiefer ore deposits is a challenge for acid copper leaching (pH ≤ 2). Therefore investigating the mobility behavior of Cu(II) under conditions related to an alternative, neutrophil biohydrometallurgical Cu(II) leaching approach is of interest. As glutamic acid (Glu) might be present as a component in the growth media, we studied its effects on the adsorption of Cu(II) onto kaolinite. The binary and ternary batch sorption measurements of Cu(II) and Glu onto kaolinite were performed in the presence of 10 mM NaClO4 as background electrolyte and at a pH range from 4 to 9. Sorption experiments were modeled by the charge-distribution multi-site ion complexation (CD-MUSIC) model by using single sorption site (≡SOH) and monodentate surface complexation reactions. Glu sorption on kaolinite is weak (<10%) and independent of pH. Furthermore, Glu slightly enhances the Cu(II) sorption at low pH but strongly hinders (up to 50%) the sorption at higher pH and therewith enhances copper mobility. The results of isotherms show that Cu(II)-Glu sorption onto kaolinite mimics the Freundlich model. The proposed CD-MUSIC model provides a close fit to the experimental data and predicts the sorption of Cu(II), Cu(II)-Glu and Glu onto kaolinite as well as the effect of Glu on Cu(II) mobility.
Collapse
|
18
|
Sorption mechanisms of arsenate on Mg-Fe layered double hydroxides: A combination of adsorption modeling and solid state analysis. CHEMOSPHERE 2017; 168:539-548. [PMID: 27839879 DOI: 10.1016/j.chemosphere.2016.11.031] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/20/2016] [Revised: 10/27/2016] [Accepted: 11/05/2016] [Indexed: 06/06/2023]
Abstract
Layered double hydroxides have been proposed as effective sorbents for As(V), but studies investigating adsorption mechanisms usually lack a comprehensive mechanistic/modeling approach. In this work, we propose coupling surface complexation modeling with various spectroscopic techniques. To this end, a series of batch experiments at different pH values were performed. Kinetic data were well fitted by a pseudo-second order kinetic model, and the equilibrium data were fitted by the Freundlich model. Moreover, the pH-dependent As(V) sorption data were satisfactorily fitted by a diffuse layer model, which described the formation of >SOAsO3H- monodentate and >(SO)2AsO2- bidentate inner-sphere complexes (">S" represents a crystallographically-bound group on the surface). Additionally, XPS analyses confirmed the adsorption mechanisms. The sorption mechanisms were affected by anion exchange, which was responsible for the formation of outer sphere complexes, as identified by XRD and FTIR analyses. Furthermore, a homogenous distribution of As(V) was determined by HR-TEM with elemental mapping. Using low-temperature Mössbauer spectroscopy on isotope 57Fe, a slight shift of the hyperfine parameters towards higher values following As(V) sorption was measured, indicating a higher degree of structural disorder. In general, mechanistic adsorption modeling coupled with solid state analyses presents a powerful approach for investigating the adsorption mechanism of As(V) on Mg-Fe LDH or other sorbents.
Collapse
|
19
|
Mechanical investigation of U(VI) on pyrrhotite by batch, EXAFS and modeling techniques. JOURNAL OF HAZARDOUS MATERIALS 2017; 322:488-498. [PMID: 27776872 DOI: 10.1016/j.jhazmat.2016.10.015] [Citation(s) in RCA: 25] [Impact Index Per Article: 3.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/01/2016] [Revised: 09/30/2016] [Accepted: 10/09/2016] [Indexed: 06/06/2023]
Abstract
The interaction mechanism of U(VI) on pyrrhotite was demonstrated by batch, spectroscopic and modeling techniques. Pyrite was selected as control group in this study. The removal of U(VI) on pyrite and pyrrhotite significantly decreased with increasing ionic strength from 0.001 to 0.1mol/L at pH 2.0-6.0, whereas the no effect of ionic strength was observed at pH >6.0. The maximum removal capacity of U(VI) on pyrite and pyrrhotite calculated from Langmuir model was 10.20 and 21.34mgg-1 at pH 4.0 and 333K, respectively. The XPS analysis indicated the U(VI) was primarily adsorbed on pyrrhotite and pyrite and then approximately 15.5 and 9.8% of U(VI) were reduced to U(IV) by pyrrhotite and pyrite after 20 days, respectively. Based on the XANES analysis, the adsorption edge of uranium-containing pyrrhotite located between UIVO2(s) and UVIO22+ spectra. The EXAFS analysis demonstrated the inner-sphere surface complexation of U(VI) on pyrrhotite due to the occurrence of U-S shell, whereas the U-U shell revealed the reductive co-precipitates of U(VI) on pyrrhotite/pyrite with increasing reaction times. The surface complexation modeling showed that outer- and inner-surface complexation dominated the U(VI) removal at pH<4 and pH>5.0, respectively. The findings presented herein play a crucial role in the removal of radionuclides on iron sulfide in environmental cleanup applications.
Collapse
|
20
|
Chromate adsorption on selected soil minerals: Surface complexation modeling coupled with spectroscopic investigation. JOURNAL OF HAZARDOUS MATERIALS 2016; 318:433-442. [PMID: 27450335 DOI: 10.1016/j.jhazmat.2016.07.002] [Citation(s) in RCA: 25] [Impact Index Per Article: 3.1] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/09/2016] [Revised: 06/22/2016] [Accepted: 07/02/2016] [Indexed: 06/06/2023]
Abstract
This study investigates the mechanisms of Cr(VI) adsorption on natural clay (illite and kaolinite) and synthetic (birnessite and ferrihydrite) minerals, including its speciation changes, and combining quantitative thermodynamically based mechanistic surface complexation models (SCMs) with spectroscopic measurements. Series of adsorption experiments have been performed at different pH values (3-10), ionic strengths (0.001-0.1M KNO3), sorbate concentrations (10(-4), 10(-5), and 10(-6)M Cr(VI)), and sorbate/sorbent ratios (50-500). Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and X-ray absorption spectroscopy were used to determine the surface complexes, including surface reactions. Adsorption of Cr(VI) is strongly ionic strength dependent. For ferrihydrite at pH <7, a simple diffuse-layer model provides a reasonable prediction of adsorption. For birnessite, bidentate inner-sphere complexes of chromate and dichromate resulted in a better diffuse-layer model fit. For kaolinite, outer-sphere complexation prevails mainly at lower Cr(VI) loadings. Dissolution of solid phases needs to be considered for better SCMs fits. The coupled SCM and spectroscopic approach is thus useful for investigating individual minerals responsible for Cr(VI) retention in soils, and improving the handling and remediation processes.
Collapse
|
21
|
Competitive sorption of Pb(II), Cu(II) and Ni(II) on carbonaceous nanofibers: A spectroscopic and modeling approach. JOURNAL OF HAZARDOUS MATERIALS 2016; 313:253-61. [PMID: 27108273 DOI: 10.1016/j.jhazmat.2016.04.002] [Citation(s) in RCA: 72] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/17/2015] [Revised: 03/27/2016] [Accepted: 04/03/2016] [Indexed: 05/28/2023]
Abstract
The competitive sorption of Pb(II), Cu(II) and Ni(II) on the uniform carbonaceous nanofibers (CNFs) was investigated in binary/ternary-metal systems. The pH-dependent sorption of Pb(II), Cu(II) and Ni(II) on CNFs was independent of ionic strength, indicating that inner-sphere surface complexation dominated sorption Pb(II), Cu(II) and Ni(II) on CNFs. The maximum sorption capacities of Pb(II), Cu(II) and Ni(II) on CNFs in single-metal systems at a pH 5.5±0.2 and 25±1°C were 3.84 (795.65mg/g), 3.21 (204.00mg/g) and 2.67 (156.70mg/g)mmol/g, respectively. In equimolar binary/ternary-metal systems, Pb(II) exhibited greater inhibition of the sorption of Cu(II) and Ni(II), demonstrating the stronger affinity of CNFs for Pb(II). The competitive sorption of heavy metals in ternary-metal systems was predicted quite well by surface complexation modeling derived from single-metal data. According to FTIR, XPS and EXAFS analyses, Pb(II), Cu(II) and Ni(II) were specifically adsorbed on CNFs via covalent bonding. These observations should provide an essential start in simultaneous removal of multiple heavy metals from aquatic environments by CNFs, and open the doorways for the application of CNFs.
Collapse
|
22
|
Cu and Zn adsorption to a heterogeneous natural sediment: Influence of leached cations and natural organic matter. CHEMOSPHERE 2016; 144:1973-1979. [PMID: 26547878 DOI: 10.1016/j.chemosphere.2015.10.109] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/06/2015] [Revised: 10/09/2015] [Accepted: 10/26/2015] [Indexed: 06/05/2023]
Abstract
Adsorption of heavy metals by natural sediments has important implications to the fate and transport of contaminants in subsurface environments. Although the importance of major multivalent cations and dissolved organic matter (DOM) in heavy metal adsorption had been previously demonstrated, the leaching of major cations and DOM from sediments and its influence on heavy metal adsorption have not been fully examined. In this study, the concentrations of Ca, Mg, Al, Fe, and natural organic matter that leached from a natural sediment in Cu and Zn adsorption experiments were measured and used in surface complexation models to elucidate their effects on Cu and Zn adsorption. Experimental results showed that the leaching of cations and DOM was substantial and pH-dependent. The leached concentrations of Ca and Mg were reasonably simulated based on BaCl2 extractable Ca and Mg at pH < 5, and Al and Fe activities were accurately predicted for specific pH ranges by assuming solubility control by Al(OH)3 and Fe(OH)3. Visual MINTEQ simulations showed that the leached cations markedly decreased Cu adsorption at pH < 6 and Zn adsorption at pH 3-8. Due to varying affinity for DOM between Cu and Zn, DOM was found to decrease Cu adsorption at pH > 6 due to formation of Cu-DOM aqueous complexes, but increase Zn adsorption at pH 4-7 due to formation of aqueous complexes between DOM and major cations, which reduced competition from these cations against Zn for binding sites on the sediment.
Collapse
|
23
|
Role of competing ions in the mobilization of arsenic in groundwater of Bengal Basin: insight from surface complexation modeling. WATER RESEARCH 2014; 55:30-9. [PMID: 24583841 DOI: 10.1016/j.watres.2014.02.002] [Citation(s) in RCA: 16] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/12/2013] [Revised: 01/02/2014] [Accepted: 02/02/2014] [Indexed: 05/26/2023]
Abstract
This study assesses the role of competing ions in the mobilization of arsenic (As) by surface complexation modeling of the temporal variability of As in groundwater. The potential use of two different surface complexation models (SCMs), developed for ferrihydrite and goethite, has been explored to account for the temporal variation of As(III) and As(V) concentration, monitored in shallow groundwater of Bengal Basin over a period of 20 months. The SCM for ferrihydrite appears as the better predictor of the observed variation in both As(III) and As(V) concentrations in the study sites. It is estimated that among the competing ions, PO4(3-) is the major competitor of As(III) and As(V) adsorption onto Fe oxyhydroxide, and the competition ability decreases in the order PO4(3-) ≫ Fe(II) > H4SiO4 = HCO3(-). It is further revealed that a small change in pH can also have a significant effect on the mobility of As(III) and As(V) in the aquifers. A decrease in pH increases the concentration of As(III), whereas it decreases the As(V) concentration and vice versa. The present study suggests that the reductive dissolution of Fe oxyhydroxide alone cannot explain the observed high As concentration in groundwater of the Bengal Basin. This study supports the view that the reductive dissolution of Fe oxyhydroxide followed by competitive sorption reactions with the aquifer sediment is the processes responsible for As enrichment in groundwater.
Collapse
|
24
|
Identifying key controls on the behavior of an acidic-U(VI) plume in the Savannah River Site using reactive transport modeling. JOURNAL OF CONTAMINANT HYDROLOGY 2013; 151:34-54. [PMID: 23707874 DOI: 10.1016/j.jconhyd.2013.04.005] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/06/2012] [Revised: 04/12/2013] [Accepted: 04/18/2013] [Indexed: 06/02/2023]
Abstract
Acidic low-level waste radioactive waste solutions were discharged to three unlined seepage basins at the F-Area of the Department of Energy (DOE) Savannah River Site (SRS), South Carolina, USA, from 1955 through 1989. Despite many years of active remediation, the groundwater remains acidic and contaminated with significant levels of U(VI) and other radionuclides. Monitored Natural Attenuation (MNA) is a desired closure strategy for the site, based on the premise that regional flow of clean background groundwater will eventually neutralize the groundwater acidity, immobilizing U(VI) through adsorption. An in situ treatment system is currently in place to accelerate this in the downgradient portion of the plume and similar measures could be taken upgradient if necessary. Understanding the long-term pH and U(VI) adsorption behavior at the site is critical to assess feasibility of MNA along with the in-situ remediation treatments. This paper presents a reactive transport (RT) model and uncertainty quantification (UQ) analyses to explore key controls on the U(VI)-plume evolution and long-term mobility at this site. Two-dimensional numerical RT simulations are run including the saturated and unsaturated (vadose) zones, U(VI) and H(+) adsorption (surface complexation) onto sediments, dissolution and precipitation of Al and Fe minerals, and key hydrodynamic processes are considered. UQ techniques are applied using a new open-source tool that is part of the developing ASCEM reactive transport modeling and analysis framework to: (1) identify the complex physical and geochemical processes that control the U(VI) plume migration in the pH range where the plume is highly mobile, (2) evaluate those physical and geochemical parameters that are most controlling, and (3) predict the future plume evolution constrained by historical, chemical and hydrological data. The RT simulation results show a good agreement with the observed historical pH and concentrations of U(VI), nitrates and Al concentrations at multiple locations. Mineral dissolution and precipitation combined with adsorption reactions on goethite and kaolinite (the main minerals present with quartz) could buffer pH at the site for long periods of time. UQ analysis using the Morris one-at-a-time (OAT) method indicates that the model/parameter is most sensitive to the pH of the waste solution, discharge rates, and the reactive surface area available for adsorption. However, as a key finding, UQ analysis also indicates that this model (and parameters) sensitivity evolves in space and time, and its understanding could be crucial to assess the temporal efficiency of a remediation strategy in contaminated sites. Results also indicate that residual U(VI) and H(+) adsorbed in the vadose zone, as well as aquifer permeability, could have a significant impact on the acidic plume long-term mobility.
Collapse
|