Factors determining bioaccumulation of neurotoxicant Hg in the zebra mussels (Dreissena polymorpha): Influence of biometric parameters, sex and storage of shell

One of benthic organisms exposed to contact with mercury in the southern Baltic is alien species of clam: Dreissena polymorpha. As this organism is increasingly dynamic in various regions of the world including the southern Baltic region, it is reasonable to ask whether it tolerates elevated concentrations of xenobiotics? Does it effectively eliminate Hg? The study determined the effects of biometric parameters and water temperature on the rate of accumulation and efficiency of eliminating Hg from body. Investigations focused on the shell which represents poorly-recognized role in the process of Hg distribution in clams. The results showed that especially during warm season, clams effectively reduced the levels of Hg in their body by the biodilution of Hg and reproduction. Important factor influencing detoxification was Hg transfer from the soft tissue to the shell. This protects the soft tissue against the toxic effect of Hg.

Mercury fractionation - Problems in method application

Mercury (Hg) is a global pollutant with a negative effect on human and ecosystem health. Mercury is toxic in all forms. The toxicity, however, varies depending on the form of mercury, determining its physical and chemical properties. Therefore, knowledge on the chemical speciation of mercury is key for the understanding of its transport and transformations in the environment. Analysis of mercury speciation, however, is time-consuming and involves high risk of contamination. The mercury thermodesorption method offers many new possibilities. The main advantages of this method are identifying which groups of compounds are being transformed in the atmosphere, sediment and soil, suspended matter and plankton, and in organisms from different trophic levels. A great advantage of the method is also its application in mercury analyzers, where it is possible to control the heating and cooling temperatures of. The standardisation of fractionation nomenclature for all matrices (both biotic and abiotic) will be helpful in application of this mercury fractionation method too. It has also disadvantages, mostly in the technical preparation of the analyzer. The analyzer must be prepared for fractionation: setting the ventilator and adjusting the PID parameters so that the pre-set heating (t1) and combustion (t2) times reach the set value in the method program. Also, any modification of the heater forces a re-optimisation of the method with mercury standards, as certified reference materials for Hg fractionation in environmental matrices are not available. The HgF2 fraction cannot be used as the methylmercury concentration, which is undoubtedly the biggest drawback of this method.

Analysis of volatile metabolites from in vitro biofilms of Pseudomonas aeruginosa with thin-film microextraction by thermal desorption gas chromatography-mass spectrometry

Cystic fibrosis (CF) is an autosomal recessive inherited disease which leads to a production of thickened mucus in the airways. These conditions are conducive to poly-microbial infections, like chronic lung infection, in which Pseudomonas aeruginosa (P. aeruginosa) is the major pathogenic bacterium colonizing CF lungs at the end of the lifetime of CF patients. This in vitro study uses a P. aeruginosa biofilm model under partly cystic fibrosis conditions, with a sampling of volatile extracellular metabolites. The gas sampling was done with thin-film microextraction (TFME) and commercial polydimethylsiloxane (PDMS) films, whereas the analysis of loaded films was done by gas chromatography coupled to quadrupole mass spectrometry and thermodesorption (TD-GC-qMS). For this purpose, two commercially available films were characterized by means of thermogravimetry coupled to a qMS with atmospheric pressure photo ionization (TG-APPI-qMS), regarding homogeneity and temperature stability. The selected film was cleaned using a method developed in this study. The TD-GC-qMS method was successfully used for standards of volatile metabolites which were known to be produced by P. aeruginosa. Limits of detection and quantification of the method for middle and less polar compounds in low nanomolar range (0.5 nM and 1.5 nM) were achieved. The developed method was finally applied to investigate the extracellular volatile metabolites produced by biofilms of the strain P. aeruginosa DSM 50071 under aerobic and anaerobic conditions. In sum, eleven metabolites could be found under both conditions. Furthermore, it was shown in this study that different oxygen conditions (aerobic and anaerobic) resulted in emitting different extracellular volatile metabolites. Specific metabolites, like 1-undecene (aerobic) and 2-undecanone (anaerobic), could be identified. The results are promising, in that the biofilm model may be applicable for the identification of P. aeruginosa under clinical conditions. Furthermore, the model could be the basis for studying extracellular volatile metabolites from different mono- or co-cultures of various bacteria, as well as the implementation of pulmonary conditions, like these in CF lungs. This possibility allows the development of a non-invasive “at-bedside” breath analysis method for CF patients in focus of various bacterial infections.

Collection, Identification, and Statistical Analysis of Volatile Organic Compound Patterns Emitted by Phytoplasma Infected Plants

In this chapter, we give an introduction to innovative attempts for the collection, identification, and statistical analysis of volatile organic compound (VOC) patterns emitted by phytoplasma-infected plants compared to healthy plants by the use of state-of-the-art techniques. This encompasses headspace-sampling techniques, gas chromatography coupled with mass spectrometry, and identification of VOC patterns by the "Automated Mass Spectral Deconvolution and Identification System" (AMDIS) followed by appropriate statistical analysis.

Mercury fractionation in marine macrofauna using thermodesorption technique: Method and its application

Mercury (Hg) is one of the most dangerous elements, and its toxicity and ability to accumulate in organisms depend on its chemical form. There are numerous methods of Hg speciation analysis, out of which the least expensive and the least time-consuming one is thermodesorption. The method has been successfully used for the analysis of abiotic samples - soils and sediments. The aim of this study was to verify whether the simplified thermodesorption method can be used in the analysis of the tissues of animal organisms from different trophic levels. Hg fractionation analyses were performed on a DMA-80 analyser (Milestone, Italy). The results presented in this paper are the first published data on Hg fractionation by thermodesorption method in animal tissues. The study showed that the 5-step thermodesorption method can be applied to various types of environmental matrices, which makes it universal. This method is of great importance in terms of estimating the Hg uptake and transfer in the trophic chain, and also enables the assessment of global Hg circulation in the environment. The presented method does not require previous digestion of samples or the use of expensive reagents. It can also be used for the preliminary selection of samples for MeHg analysis. The results obtained by this 5-step fractionation could be comparable with different research, conducted using other Hg analysers.

Determination of volatile organic compounds from biowaste and co-fermentation biogas plants by single-sorbent adsorption

Characterisation of biogases is normally dedicated to the online monitoring of the major components methane and carbon dioxide and, to a lesser extent, to the determination of ammonia and hydrogen sulphide. For the case of Volatile Organic Compounds (VOCs), much less attention is usually paid, since such compounds are normally removed during gas conditioning and with exception of sulphur compounds and siloxanes represent a rather low risk to conventional downstream devices but could be a hindrance for fuel cells. However, there is very little information in the literature about the type of substances found in biogases generated from biowaste or co-fermentation plants and their concentration fluctuations. The main aim of this study was to provide information about the time dependencies of the VOCs in three biogas plants spread out through Germany from autumn until summer, which have different process control, in order to assess their potential as biofuels. Additionally, this study was an attempt to establish a correlation between the nature of the substrates used in the biogas plants and the composition of the VOCs present in the gas phase. Significant time-dependent variations in concentration were observed for most VOCs but only small changes in composition were observed. In general, terpenes and ketones appeared as the predominant VOCs in biogas. Although for substances such as esters, sulphur-organic compounds and siloxanes the average concentrations observed were rather low, they exhibited significant concentration peaks. The second biogas plant which operates with dry fermentation was found to contain the highest levels of VOCs. The amount of total volatile organic compounds (TVOCs) for the first, second and third biogas plants ranged from 35 to 259 mg Nm(-3), 291-1731 mg Nm(-3) and 84-528 mg Nm(-3), respectively.