Minimizing Interfacial Recombination in 1.8 eV Triple-Halide Perovskites for 27.5% Efficient All-Perovskite Tandems

All-perovskite tandem solar cells show great potential to enable the highest performance at reasonable costs for a viable market entry in the near future. In particular, wide-bandgap (WBG) perovskites with higher open-circuit voltage (VOC ) are essential to further improve the tandem solar cells' performance. Here, a new 1.8 eV bandgap triple-halide perovskite composition in conjunction with a piperazinium iodide (PI) surface treatment is developed. With structural analysis, it is found that the PI modifies the surface through a reduction of excess lead iodide in the perovskite and additionally penetrates the bulk. Constant light-induced magneto-transport measurements are applied to separately resolve charge carrier properties of electrons and holes. These measurements reveal a reduced deep trap state density, and improved steady-state carrier lifetime (factor 2.6) and diffusion lengths (factor 1.6). As a result, WBG PSCs achieve 1.36 V VOC , reaching 90% of the radiative limit. Combined with a 1.26 eV narrow bandgap (NBG) perovskite with a rubidium iodide additive, this enables a tandem cell with a certified scan efficiency of 27.5%.

Hole Transport Layer-Free Low-Bandgap Perovskite Solar Cells for Efficient All-Perovskite Tandems

Low-bandgap (LBG, Eg  ≈1.25 eV) tin-lead (Sn-Pb) perovskite solar cells (PSCs) play critical roles in constructing efficient all-perovskite tandem solar cells (TSCs) that can surpass the efficiency limit of single-junction solar cells. However, the traditional poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) hole transport layer (HTL) in LBG PSCs usually restricts device efficiency and stability. Here, a strategy of employing 2-aminoethanesulfonic acid (i.e., taurine) as the interface bridge to fabricate efficient HTL-free LBG PSCs with improved optoelectronic properties of the perovskite absorbers at the buried contacts is reported. Taurine-modified ITO substrate has lower optical losses, better energy level alignment, and higher charge transfer capability than PEDOT:PSS HTL, leading to significantly improved open-circuit voltage (VOC ) and short-circuit current density of corresponding devices. The best-performing LBG PSC with a power conversion efficiency (PCE) of 22.50% and an impressive VOC of 0.911 V is realized, enabling all-perovskite TSCs with an efficiency of 26.03%. The taurine-based HTL-free TSCs have highly increased stability, retaining more than 90% and 80% of their initial PCEs after constant operation under 1-sun illumination for 600 h and under 55 °C thermal stress for 950 h, respectively. This work provides a facile strategy for fabricating efficient and stable perovskite devices with a simplified HTL-free architecture.

Efficient Narrow-Bandgap Mixed Tin-Lead Perovskite Solar Cells via Natural Tin Oxide Doping

Narrow-bandgap (NBG) mixed tin/lead-based (Sn-Pb) perovskite solar cells (PSCs) have attracted extensive attention for use in tandem solar cells. However, they are still plagued by serious carrier recombination due to inferior film properties resulting from the alloying of Sn with Pb elements, which leads to p-type self-doping behaviors. This work reports an effective tin oxide (SnOx ) doping strategy to produce high-quality Sn-Pb perovskite films for utilization in efficient single-junction and tandem PSCs. SnOx can be naturally oxidized from tin diiodide raw powders and successfully incorporated into Sn-Pb perovskite films. Consequently, Sn-Pb perovskite films doped with SnOx exhibit dramatically improved morphology, crystallization, absorption, and more interestingly, upward-shifted Fermi levels. The resulting narrow-bandgap Sn-Pb PSCs with natural SnOx doping have considerably reduced carrier recombination, therefore delivering a maximum power conversion efficiency (PCE) of 22.16% for single-junction cells and a remarkable PCE of 26.01% (with a steady-state efficiency of 25.33%) for two-terminal all-perovskite tandem cells. This work introduces a facile doping strategy for the manufacture of efficient single-junction narrow-bandgap PSCs and their tandem solar cells.

Improved Carrier Management via a Multifunctional Modifier for High-Quality Low-Bandgap Sn-Pb Perovskites and Efficient All-Perovskite Tandem Solar Cells

All-perovskite tandem solar cells (TSCs) hold great promise in terms of ultrahigh efficiency, low manufacturing cost, and flexibility, stepping forward to the next-generation photovoltaics. However, their further development is hampered by the relatively low performance of low-bandgap (LBG) tin (Sn)-lead (Pb) perovskite solar cells (PSCs). Improving the carrier management, including suppressing trap-assisted non-radiative recombination and promoting carrier transfer, is of great significance to enhance the performance of Sn-Pb PSCs. Herein, a carrier management strategy is reported for using cysteine hydrochloride (CysHCl) simultaneously as a bulky passivator and a surface anchoring agent for Sn-Pb perovskite. CysHCl processing effectively reduces trap density and suppresses non-radiative recombination, enabling the growth of high-quality Sn-Pb perovskite with greatly improved carrier diffusion length of >8 µm. Furthermore, the electron transfer at the perovskite/C₆₀ interface is accelerated due to the formation of surface dipoles and favorable energy band bending. As a result, these advances enable the demonstration of champion efficiency of 22.15% for CysHCl-processed LBG Sn-Pb PSCs with remarkable enhancement in both open-circuit voltage and fill factor. When paired with a wide-bandgap (WBG) perovskite subcell, a certified 25.7%-efficient all-perovskite monolithic tandem device is further demonstrated.

Solution-Processed Ternary Tin (II) Alloy as Hole-Transport Layer of Sn-Pb Perovskite Solar Cells for Enhanced Efficiency and Stability

Tin-lead (Sn-Pb) narrow-bandgap (NBG) perovskites show great potential in both single-junction and all-perovskite tandem solar cells. Sn-Pb perovskite solar cells (PSCs) are still limited by low charge collection efficiency and poor stability. Here, a ternary Sn (II) alloy of SnOCl is reported as the hole-transport material (HTM) with a work function of 4.95 eV for Sn-Pb PSCs. The solution-processed SnOCl layer has a texture structure that not only reduces the optical loss of the devices, but also changes grain growth of Sn-Pb perovskites and boosts the carrier diffusion length to 3.63 µm. The formation of small perovskite grains at the HTM/perovskite interface is suppressed. These result in an almost constant internal quantum efficiency (IQE) of 96 ± 2% across the absorption spectrum of Sn-Pb perovskites. The SnOCl HTM significantly enhances the stability of Sn-Pb PSCs with 87% of its initial efficiency retained after 1-sun illumination for 1200 h, and keeps 85% efficiency under 85 °C thermal stress for 1500 h. The hybrid HTM further improves the stabilized efficiencies of single-junction Sn-Pb PSCs and all-perovskite tandem solar cells to 23.2% and 25.9%, respectively. This discovery opens an avenue to the multicomponent metal alloys as HTM in PSCs.

Steric Engineering Enables Efficient and Photostable Wide-Bandgap Perovskites for All-Perovskite Tandem Solar Cells

Wide-bandgap (WBG, ≈1.8 eV) perovskite is a crucial component to pair with narrow-bandgap perovskite in low-cost monolithic all-perovskite tandem solar cells. However, the stability and efficiency of WBG perovskite solar cells (PSCs) are constrained by the light-induced halide segregation and by the large photovoltage deficit. Here, a steric engineering to obtain high-quality and photostable WBG perovskites (≈1.8 eV) suitable for all-perovskite tandems is reported. By alloying dimethylammonium and chloride into the mixed-cation mixed-halide perovskites, wide bandgaps are obtained with much lower bromide contents while the lattice strain and trap densities are simultaneously minimized. The WBG PSCs exhibit considerably improved performance and photostability, retaining >90% of their initial efficiencies after 1000 h of operation at maximum power point. With the triple-cation/triple-halide WBG perovskites enabled by steric engineering, a stabilized power conversion efficiency of 26.0% in all-perovskite tandem solar cells is further obtained. The strategy provides an avenue to fabricate efficient and stable WBG subcells for multijunction photovoltaic devices.

Gradient Doping in Sn-Pb Perovskites by Barium Ions for Efficient Single-Junction and Tandem Solar Cells

Narrow-bandgap (NBG) tin (Sn)-lead (Pb) perovskites generally have a high density of unintentional p-type self-doping, which reduces the charge-carrier lifetimes, diffusion lengths, and device efficiencies. Here, a p-n homojunction across the Sn-Pb perovskite is demonstrated, which results from a gradient doping by barium ions (Ba²⁺ ). It is reported that 0.1 mol% Ba²⁺ can effectively compensate the p-doping of Sn-Pb perovskites or even turns it to n-type without changing its bandgap. Ba²⁺ cations are found to stay at the interstitial sites and work as shallow electron donor. In addition, Ba²⁺ cations show a unique heterogeneous distribution in perovskite film. Most of the barium ions stay in the top 600 nm region of the perovskite films and turn it into weakly n-type, while the bottom portion of the film remains as p-type. The gradient doping forms a homojunction from top to bottom of the perovskite films with a built-in field that facilitates extraction of photogenerated carriers, resulting in an increased carrier extraction length. This strategy enhances the efficiency of Sn-Pb perovskite single-junction solar cells to over 21.0% and boosts the efficiencies of monolithic perovskite-perovskite tandem solar cells to 25.3% and 24.1%, for active areas of 5.9 mm²  and 0.94 cm² , respectively.