Sol-Gel Barium Titanate Nanohole Array as a Nonlinear Metasurface and a Photonic Crystal

The quest of a nonlinear optical material that can be easily nanostructured over a large surface area is still ongoing. Here, we demonstrate a nanoimprinted nonlinear barium titanate 2D nanohole array that shows the optical properties of a 2D photonic crystal and a metasurface, depending on the direction of the optical axis. The challenge of nanostructuring the inert metal-oxide is resolved by direct soft nanoimprint lithography with sol-gel derived barium titanate enabling critical dimensions of 120 nm with aspect ratios of five. The nanohole array exhibits a photonic bandgap in the infrared range when probed along the slab axis, while lattice resonant states are observed in out-of-plane transmission configuration. The enhanced light-matter interaction from the resonant structure enables to increase in the second-harmonic generation in the near-ultraviolet by a factor of 18 illustrating the potential in the flexible fabrication technique for barium titanate photonic devices.

Directed Assembly of Nanomaterials for Making Nanoscale Devices and Structures: Mechanisms and Applications

Nanofabrication has been utilized to manufacture one-, two-, and three-dimensional functional nanostructures for applications such as electronics, sensors, and photonic devices. Although conventional silicon-based nanofabrication (top-down approach) has developed into a technique with extremely high precision and integration density, nanofabrication based on directed assembly (bottom-up approach) is attracting more interest recently owing to its low cost and the advantages of additive manufacturing. Directed assembly is a process that utilizes external fields to directly interact with nanoelements (nanoparticles, 2D nanomaterials, nanotubes, nanowires, etc.) and drive the nanoelements to site-selectively assemble in patterned areas on substrates to form functional structures. Directed assembly processes can be divided into four different categories depending on the external fields: electric field-directed assembly, fluidic flow-directed assembly, magnetic field-directed assembly, and optical field-directed assembly. In this review, we summarize recent progress utilizing these four processes and address how these directed assembly processes harness the external fields, the underlying mechanism of how the external fields interact with the nanoelements, and the advantages and drawbacks of utilizing each method. Finally, we discuss applications made using directed assembly and provide a perspective on the future developments and challenges.

Evaluation of Mesoporous TiO2 Layers as Glucose Optical Sensors

Porous materials are currently the basis of many optical sensors because of their ability to provide a higher interaction between the light and the analyte, directly within the optical structure. In this study, mesoporous TiO₂ layers were fabricated using a bottom-up synthesis approach in order to develop optical sensing structures. In comparison with more typical top-down fabrication strategies where the bulk constitutive material is etched in order to obtain the required porous medium, the use of a bottom-up fabrication approach potentially allows increasing the interconnectivity of the pore network, hence improving the surface and depth homogeneity of the fabricated layer and reducing production costs by synthesizing the layers on a larger scale. The sensing performance of the fabricated mesoporous TiO₂ layers was assessed by means of the measurement of several glucose dilutions in water, estimating a limit of detection even below 0.15 mg/mL (15 mg/dL). All of these advantages make this platform a very promising candidate for the development of low-cost and high-performance optical sensors.

Multiple Scattering and Random Quasi-Phase-Matching in Disordered Assemblies of LiNbO3 Nanocubes

Nonlinear disordered photonic media (NDPM), composed of a random configuration of noncentrosymmetric crystals, offer a versatile platform to tailor nonlinear optical effects. The second-harmonic generation (SHG) and its random quasi-phase-matching (RQPM) in the multiple scattering regime are still poorly explored. In this work, we bottom-up assemble NDPM in two different geometries by using LiNbO₃ nanocubes as building blocks and investigate both the multiple scattering and the nonlinear properties. We produce disordered slabs with a continuously variable thickness and microspheres with different diameters, which display a remarkable strong light scattering, evidenced by a subwavelength transport mean free path (). We first provide explicit evidence that the SHG power scales linearly with both the thickness of the slab and the volume of the microspheres. These observations generalize the characteristic linear scaling of RQPM power with the volume to the multiple scattering regime and to different sample geometries. Our structures represent a promising platform to investigate the interplay between disorder and optical nonlinear effects.

Plasmonic Nanohole Arrays on Top of Porous Silicon Sensors: A Win-Win Situation

Label-free optical sensors are attractive candidates, for example, for detecting toxic substances and monitoring biomolecular interactions. Their performance can be pushed by the design of the sensor through clever material choices and integration of components. In this work, two porous materials, namely, porous silicon and plasmonic nanohole arrays, are combined in order to obtain increased sensitivity and dual-mode sensing capabilities. For this purpose, porous silicon monolayers are prepared by electrochemical etching and plasmonic nanohole arrays are obtained using a bottom-up strategy. Hybrid sensors of these two materials are realized by transferring the plasmonic nanohole array on top of the porous silicon. Reflectance spectra of the hybrid sensors are characterized by a fringe pattern resulting from the Fabry-Pérot interference at the porous silicon borders, which is overlaid with a broad dip based on surface plasmon resonance in the plasmonic nanohole array. In addition, the hybrid sensor shows a significant higher reflectance in comparison to the porous silicon monolayer. The sensitivities of the hybrid sensor to refractive index changes are separately determined for both components. A significant increase in sensitivity from 213 ± 12 to 386 ± 5 nm/RIU is determined for the transfer of the plasmonic nanohole array sensors from solid glass substrates to porous silicon monolayers. In contrast, the spectral position of the interference pattern of porous silicon monolayers in different media is not affected by the presence of the plasmonic nanohole array. However, the changes in fringe pattern reflectance of the hybrid sensor are increased 3.7-fold after being covered with plasmonic nanohole arrays and could be used for high-sensitivity sensing. Finally, the capability of the hybrid sensor for simultaneous and independent dual-mode sensing is demonstrated.

Silicon Nanowires for Gas Sensing: A Review

The unique electronic properties of semiconductor nanowires, in particular silicon nanowires (SiNWs), are attractive for the label-free, real-time, and sensitive detection of various gases. Therefore, over the past two decades, extensive efforts have been made to study the gas sensing function of NWs. This review article presents the recent developments related to the applications of SiNWs for gas sensing. The content begins with the two basic synthesis approaches (top-down and bottom-up) whereby the advantages and disadvantages of each approach have been discussed. Afterwards, the basic sensing mechanism of SiNWs for both resistor and field effect transistor designs have been briefly described whereby the sensitivity and selectivity to gases after different functionalization methods have been further presented. In the final words, the challenges and future opportunities of SiNWs for gas sensing have been discussed.

Bottom-Up Construction of Active Sites in a Cu-N4-C Catalyst for Highly Efficient Oxygen Reduction Reaction

Bottom-up construction of efficient active sites in transition metal-nitrogen-carbon (M-N-C) catalysts for oxygen reduction reaction (ORR) from single molecular building blocks remains one of the most difficult challenges. Herein, we report a bottom-up approach to produce a highly active Cu-N₄-C catalyst with well-defined Cu-N₄ coordination sites derived from a small molecular copper complex containing Cu-N₄ moieties. The Cu-N₄ moieties were found to be covalently integrated into graphene sheets to create the Cu-N₄ active sites for ORR. Furthermore, the activity was boosted by tuning the structure of active sites. We find that the high ORR activity of the Cu-N₄-C catalyst is related to the Cu-N₄ center linked to edges of the graphene sheets, where the electronic structure of the Cu center has the right symmetry for the degenerate π* orbital of the O₂ molecule. These findings point out the direction for the synthesis of the M-N-C catalysts at the molecular level.

Hierarchical On-Surface Synthesis of Graphene Nanoribbon Heterojunctions

Bottom-up graphene nanoribbon (GNR) heterojunctions are nanoscale strips of graphene whose electronic structure abruptly changes across a covalently bonded interface. Their rational design offers opportunities for profound technological advancements enabled by their extraordinary structural and electronic properties. Thus far, the most critical aspect of their synthesis, the control over sequence and position of heterojunctions along the length of a ribbon, has been plagued by randomness in monomer sequences emerging from step-growth copolymerization of distinct monomers. All bottom-up GNR heterojunction structures created so far have exhibited random sequences of heterojunctions and, while useful for fundamental scientific studies, are difficult to incorporate into functional nanodevices as a result. In contrast, we describe a hierarchical fabrication strategy that allows the growth of bottom-up GNRs that preferentially exhibit a single heterojunction interface rather than a random statistical sequence of junctions along the ribbon. Such heterojunctions provide a viable platform that could be directly used in functional GNR-based device applications at the molecular scale. Our hierarchical GNR fabrication strategy is based on differences in the dissociation energies of C-Br and C-I bonds that allow control over the growth sequence of the block copolymers from which GNRs are formed and consequently yields a significantly higher proportion of single-junction GNR heterostructures. Scanning tunneling spectroscopy and density functional theory calculations confirm that hierarchically grown heterojunctions between chevron GNR (cGNR) and binaphthyl-cGNR segments exhibit straddling Type I band alignment in structures that are only one atomic layer thick and 3 nm in width.

Bottom-Up Single-Electron Transistors

As the downscaling of conventional semiconductor electronics becomes more and more challenging, the interest in alternative material systems and fabrication methods is growing. A novel bottom-up approach for the fabrication of high-quality single-electron transistors (SETs) that can easily be contacted electrically in a controllable manner is developed. This approach employs the self-assembly of Au nanoparticles forming the SETs, and Au nanorods forming the leads to macroscopic electrodes, thus bridging the gap between the nano- and microscale. Low-temperature electron-transport measurements reveal exemplary single-electron tunneling characteristics. SET behavior can be significantly changed, post-fabrication, using molecular exchange of the tunnel barriers, demonstrating the tunability of the assemblies. These results form a promising proof of principle for the versatility of bottom-up nanoelectronics, and toward controlled fabrication of nanoelectronic devices.

Self-Assembly Strategy for Fabricating Connected Graphene Nanoribbons

We use self-assembly to fabricate and to connect precise graphene nanoribbons end to end. Combining scanning tunneling microscopy, Raman spectroscopy, and density functional theory, we characterize the chemical and electronic aspects of the interconnections between ribbons. We demonstrate how the substrate effects of our self-assembly can be exploited to fabricate graphene structures connected to desired electrodes.

Resistive switching in high-density nanodevices fabricated by block copolymer self-assembly

Bipolar resistive switching memories based on metal oxides offer a great potential in terms of simple process integration, memory performance, and scalability. In view of ultrahigh density memory applications, a reduced device size is not the only requirement, as the distance between different devices is a key parameter. By exploiting a bottom-up fabrication approach based on block copolymer self-assembling, we obtained the parallel production of bilayer Pt/Ti top electrodes arranged in periodic arrays over the HfO2/TiN surface, building memory devices with a diameter of 28 nm and a density of 5 × 10(10) devices/cm(2). For an electrical characterization, the sharp conducting tip of an atomic force microscope was adopted for a selective addressing of the nanodevices. The presence of devices showing high conductance in the initial state was directly connected with scattered leakage current paths in the bare oxide film, while with bipolar voltage operations we obtained reversible set/reset transitions irrespective of the conductance variability in the initial state. Finally, we disclosed a scalability limit for ultrahigh density memory arrays based on continuous HfO2 thin films, in which a cross-talk between distinct nanodevices can occur during both set and reset transitions.

Bottom-up graphene-nanoribbon fabrication reveals chiral edges and enantioselectivity

We produce precise chiral-edge graphene nanoribbons on Cu{111} using self-assembly and surface-directed chemical reactions. We show that, using specific properties of the substrate, we can change the edge conformation of the nanoribbons, segregate their adsorption chiralities, and restrict their growth directions at low surface coverage. By elucidating the molecular-assembly mechanism, we demonstrate that our method constitutes an alternative bottom-up strategy toward synthesizing defect-free zigzag-edge graphene nanoribbons.

Creation of functional micro/nano systems through top-down and bottom-up approaches

Mimicking nature's approach in creating devices with similar functional complexity is one of the ultimate goals of scientists and engineers. The remarkable elegance of these naturally evolved structures originates from bottom-up self-assembly processes. The seamless integration of top-down fabrication and bottom-up synthesis is the challenge for achieving intricate artificial systems. In this paper, technologies necessary for guided bottom-up assembly such as molecular manipulation, molecular binding, and the self assembling of molecules will be reviewed. In addition, the current progress of synthesizing mechanical devices through top-down and bottom-up approaches will be discussed.