Evaluation of the enantioselectivity of new chiral ligands based on imidazolidin-4-one derivatives

The new chiral ligands I-III based on derivatives of imidazolidin-4-one were synthesised and characterised. The catalytic activity and enantioselectivity of their corresponding copper(II) complexes were studied in asymmetric Henry reactions. It was found that the enantioselectivity of these catalysts is overall very high and depends on the relative configuration of the ligand used; cis-configuration of ligand affords the nitroaldols with major enantiomer S- (up to 97% ee), whereas the application of ligands with trans-configuration led to nitroaldols with major R-enantiomer (up to 96% ee). The "proline-type" ligand IV was also tested in asymmetric aldol reactions. Under the optimised reaction conditions, aldol products with enantioselectivities of up to 91% ee were obtained.

Enhancing the Efficacy of Chiral Ligands and Catalysts: Siloxane-Substituted Oxazoline Ferrocenes as Next-Generation Candidates

Since the discovery of classical chiral oxazoline ferrocene ligands in 1995, they have become pivotal in transition metal-catalyzed asymmetric transformations. Over the past decade, a notable evolution has been observed with the emergence of siloxane-substituted oxazoline ferrocenes, demonstrating significant potential as chiral ligands and catalysts. These compounds have consistently delivered exceptional results in diverse and mechanistically distinct transformations, surpassing the capabilities of classical oxazoline ferrocene ligands. This review meticulously delineates the research progress on siloxane-substituted oxazoline ferrocene compounds. It encompasses the synthesis of crucial precursors and desired products, highlights their achievements in asymmetric catalysis reactions, and delves into the exploration of the derivatization of these compounds, emphasizing the introduction of ionophilic groups and their impact on the recovery of transition metal catalysts. In addition to presenting the current state of knowledge, this review propels future research directions by identifying potential topics for further investigation concerning the siloxane-tagged derivatives. These derivatives are poised to be promising candidates for the next generation of highly efficient ligands and catalysts.

Enantioselective C-H Functionalization Reactions under Gold Catalysis

Transition metal-catalyzed enantioselective functionalization of ubiquitous C-H bonds has proven to be promising field as it offers the construction of chiral molecular complexity in a step- and atom-economical manner. In recent years, gold has emerged as an attractive contender for catalyzing such reactions. The unique reactivities and selectivities offered by gold catalysts have been exploited to access numerous asymmetric transformations based on gold-catalyzed C-H functionalization processes. Herein, this review critically highlights the major advances and discoveries made in the enantioselective C-H functionalization under gold catalysis which is accompanied by mechanistic insights at appropriate places.

Novel Bispidine-Monoterpene Conjugates-Synthesis and Application as Ligands for the Catalytic Ethylation of Chalcones

A number of new chiral bispidines containing monoterpenoid fragments have been obtained. The bispidines were studied as ligands for Ni-catalyzed addition of diethylzinc to chalcones. The conditions for chromatographic analysis by HPLC-UV were developed, in which the peaks of the enantiomers of all synthesized chiral products were separated, which made it possible to determine the enantiomeric excess of the resulting mixture. It was demonstrated that bispidine-monoterpenoid conjugates can be used as the ligands for diethylzinc addition to chalcone C=C double bond but not as inducers of chirality. Besides products of ethylation, formation of products of formal hydrogenation of the chalcone C=C double bond was observed in all cases. Note, that this formation of hydrogenation products in significant amounts in the presence of such catalytic systems was found for the first time. A tentative scheme explaining the formation of all products was proposed.

New-Generation Ligand Design for the Gold-Catalyzed Asymmetric Activation of Alkynes

Gold(I) catalysts are ideal for the activation of alkynes under very mild conditions. However, unlike allenes or alkenes, the triple bond of alkynes cannot be prochiral. In addition, the linear coordination displayed by gold(I) complexes places the chiral ligand far away from the substrate resulting in an inefficient transfer of chiral information. This poses a significant challenge for the achievement of high enantiocontrol in gold(I)-catalyzed reactions of alkynes. Although considerable progress on enantioselective gold(I)-catalyzed transformations has recently been achieved, the asymmetric activation of non-prochiral alkyne-containing small molecules still represents a great challenge. Herein we summarize recent advances in intra- and intermolecular enantioselective gold(I)-catalyzed reactions involving alkynes, discussing new chiral ligand designs that lie at the basis of these developments. We also focus on the mode of action of these catalysts, their possible limitations towards a next-generation of more efficient ligand designs. Finally, square planar chiral gold(III) complexes, which offer an alternative to chiral gold(I) complexes, are also discussed.

Chiral Gold(III) Complexes: Synthesis, Structure, and Potential Applications

Since the beginning of the 2000's, homogeneous gold catalysis has emerged as a powerful tool to promote the cyclization of unsaturated substrates with excellent regioselectivity allowing the synthesis of elaborated organic scaffolds. An important goal to achieve in gold catalysis is the possibility to induce enantioselective transformations by the assistance of chiral complexes. Unfortunately, the linear geometry of coordination for gold usually encountered in complexes at the +1 oxidation states renders this goal very challenging. In consequence, the interest toward the synthesis of chiral gold(III) complexes is steadily growing. Indeed, the square planar geometry of the gold(III) cation appears more suitable to promote chiral induction. Beside catalysis, gold(III) complexes have also shown promising potential in the field of pharmacology. Herein, syntheses and applications of well-defined gold(III) complexes reported over the last fifteen years are summarized.

New Nitrogen, Sulfur-, and Selenium-Donating Ligands Derived from Chiral Pyridine Amino Alcohols. Synthesis and Catalytic Activity in Asymmetric Allylic Alkylation

Although many chiral ligands for asymmetric catalysis have been developed, there is still a need for new structures allowing the modular approach. Recently, easy synthesis of chiral pyridine-containing β-amino alcohols has been elaborated by opening respective epoxides with enantiomeric 1-phenylethylamine. This paper reports the synthetic transformation of β-amino alcohols into the new complexing pyridine-containing seleno- and thioethers. The amino alcohols were effectively converted to cyclic sulfonamidates, which were reacted with thiolates or phenyl selenide nucleophile. The reaction was diastereoselective, and its outcome depended on the configuration at the substitution center. The problem was discussed considering DFT optimized structures of both diastereomeric sulfonamidates. New amino-aldimine ligands were also synthesized from chiral pyridine-containing diamines. Nine new chiral ligands were tested in the Tsuji-Trost allylic alkylation resulting in the enantiomerically enriched product in up to 75% ee. The observed stereochemical induction agrees with the prevailing nucleophilic attack at the allylic carbon laying opposite to the complexing nitrogen of pyridine in η³-allylic intermediate complexes.

Binuclear Lanthanide(III) Complexes with Chiral Ligands: Dynamic Equilibria in Solution and Binding with Nucleotides Studied by Spectroscopic Methods

Binuclear lanthanide complexes of Eu(III) and Sm(III) were obtained in the presence of chiral ligand 1,2-(R,R+S,S)-N,N'-bis(2-pyridylmethylene),2-diamine. An unusual structure of the Eu(III) compound with two lanthanide atoms connected through two chlorines was determined by X-ray crystallography. In solution, the dimer coexists with a monomeric complex, and the stability of the binuclear form depends on the solvent and concentration. The dimer-monomer equilibrium was monitored by circularly polarized luminescence (CPL) measured on a Raman optical activity (ROA) spectrometer, where both forms provided large CPL anisotropic ratios of up to 5.6×10^-2 . Monomer formation was favored in water, whereas the dimer was stabilized in methanol. When mixed with adenosine phosphates, AMP gave much smaller CPL than ADP and ATP, indicating a high affinity of the Eu (III) complex for the phosphate group, which in connection with the ROA/CPL technique can be developed into a bioanalytical probe.

Enantioselective Protonation: Hydrophosphinylation of 1,1-Vinyl Azaheterocycle N-Oxides Catalyzed by Chiral Bis(guanidino)iminophosphorane Organosuperbase

Enantioselective protonation by hydrophosphinylation of diarylphosphine oxides with 2-vinyl azaheterocycle N-oxide derivatives was demonstrated using chiral bis(guanidino)iminophosphorane as the higher-order organosuperbase catalyst. It was confirmed by several control experiments that a chiral weak conjugate acid of the chiral bis(guanidino)iminophosphorane, instead of achiral diarylphosphine oxides, directly functioned as the proton source to afford the corresponding product in a highly enantioselective manner in most cases. Enantioselective protonation by a weak conjugate acid generated from the higher-order organosuperbase would broaden the scope of enantioselective reaction systems because of utilization of a range of less acidic pronucleophiles. This method is highlighted by the valuable synthesis of a series of chiral P,N-ligands for chiral metal complexes through the reduction of phosphine oxide and N-oxide units of the corresponding product without loss of enantiomeric purity.

Chiral Catalysts for Pd0 -Catalyzed Enantioselective C-H Activation

In the past few decades, processes that involve transition-metal catalysis have represented a major part of the synthetic chemist's toolbox. Recently, the interest has shifted from the well-established cross-coupling reactions to C-H bond functionalization, thus making it a current frontier of transition-metal-catalyzed reactions. Constant progress in this field has led to the discovery of enantioselective methods to generate and control various types of stereogenic elements, thereby demonstrating its high value to generate scalemic chiral molecules. The present review is dedicated to enantioselective Pd⁰ -catalyzed C-H activation, which may be considered as an evolution of Pd⁰ -catalyzed cross-couplings, with a focus on the different chiral ligands and catalysts that enable these transformations.

New Advances in the Synthetic Application of Enantiomeric 1-Phenylethylamine (α-PEA): Privileged Chiral Inducer and Auxiliary

New developments in the synthesis, resolution, and synthetic applications of chiral 1-phenylethylamine (α-PEA) reported in the last decade have been reviewed. In particular, improvements in the synthesis of α-PEA and its derivatives and chiral resolution, as well as their applications in the resolution of other compounds, were discussed. α-PEA was used as a chiral auxiliary in the diastereoselective synthesis of medicinal substances and natural products. Chiral ligands with α-PEA moieties were applied in asymmetric reactions, and effective modular chiral organocatalysts were constructed with α-PEA fragments and used in important synthetic reactions.

Strategies to Achieve High Circularly Polarized Luminescence from Colloidal Organic-Inorganic Hybrid Perovskite Nanocrystals

Colloidal metal halide perovskite nanocrystals (NCs) with chiral ligands are outstanding candidates as a circularly polarized luminescence (CPL) light source due to many advantages such as high photoluminescence quantum efficiency, large spin-orbit coupling, and extensive tunability via composition and choice of organic ligands. However, achieving pronounced and controllable polarized light emission remains challenging. Here, we develop strategies to achieve high CPL responses from colloidal formamidinium lead bromide (FAPbBr3) NCs at room temperature using chiral surface ligands. First, we show that replacing a portion of typical ligands (oleylamine) with short chiral ligands ((R)-2-octylamine) during FAPbBr3 NC synthesis results in small and monodisperse NCs that yield high CPL with average luminescence dissymmetry g-factor, glum = 6.8 × 10-2. To the best of our knowledge, this is the highest among reported perovskite materials at room temperature to date and represents around 10-fold improvement over the previously reported colloidal CsPbClxBryI3-x-y NCs. In order to incorporate NCs into any optoelectronic or spintronic application, the NCs necessitate purification, which removes a substantial amount of the chiral ligands and extinguishes the CPL signals. To circumvent this issue, we also developed a postsynthetic ligand treatment using a different chiral ligand, (R-/S-)methylbenzylammonium bromide, which also induces a CPL with an average glum = ±1.18 × 10-2. This postsynthetic method is also amenable for long-range charge transport since methylbenzylammonium is quite compact in relation to other surface ligands. Our demonstrations of high CPL and glum from both as-synthesized and purified perovskite NCs at room temperature suggest a route to demonstrate colloidal NC-based spintronics.

A Chiral Macrocyclic Tetra-N-Heterocyclic Carbene Yields an "All Carbene" Iron Alkylidene Complex

The first chiral macrocyclic tetra-N-heterocyclic carbene (NHC) ligand has been synthesized. The macrocycle, prepared in high yield and large scale, was ligated onto palladium and iron to give divalent C2 -symmetric square planar complexes. Multinuclear NMR and single crystal X-ray diffraction demonstrated that there are two distinct NHCs on each ligand, due to the bridging chiral cyclohexane. Oxidation of the iron(II) complex with trimethylamine N-oxide yielded a bridging oxo complex. Diazodiphenylmethane reacted with the iron(II) complex at room temperature to give a paramagnetic diazoalkane complex; the same reaction yielded the "all carbene" complex at elevated temperature. Electrochemical measurements support the assignment of the "all carbene" complex being an alkylidene. Notably, the diazoalkane complex can be directly transformed into the alkylidene complex, which had not been previously demonstrated on iron. Finally, a test catalytic reaction with a diazoalkane on the iron(II) complex does not yield the expected cyclopropane, but actually the azine compound.

Tautomerism and Self-Association in the Solution of New Pinene-Bipyridine and Pinene-Phenanthroline Derivatives

Two novel pinene-type ligands have been synthesized and their tautomeric and self-associating behavior studied in solution and in the solid state. The first ligand, an acetylated derivative of 5,6-pinene-bipyridine, displays keto-enol tautomerism in solution. This tautomeric equilibrium was studied by NMR and UV-Vis spectroscopy in various solvents, and the results were compared with the ones obtained through DFT calculations. The second ligand was obtained by an unusual oxidation of the phenanthroline unit of a pinene-phenanthroline derivative. This compound exists as a single tautomer in solution and aggregates both in solution (as observed by NMR) and in the solid state through H-bonding as observed by X-ray structure determination and confirmed by DFT studies.

Efficient Enantioselective Syntheses of Chiral Natural Products Facilitated by Ligand Design

The employment of enantioselective transition-metal-catalyzed transformations as key steps in asymmetric natural product syntheses have attracted considerable attention in recent years owing to their versatile synthetic utilities, mild conditions and high efficiency in chirality generation. The chiral catalysts or supporting ligands are believed to be crucial for the requisite reactivity and enantioselectivity. Therefore, the rational design of chiral ligands is at the heart of developing new asymmetric transition-metal catalyzed reactions and provides an avenue to the asymmetric synthesis of natural products. Our group has been engaged in the development of transition-metal-catalyzed enantioselective cross-coupling, cyclization and other related reactions and the application of these methodologies to natural product syntheses. In this account, we summarized our recent synthetic efforts towards the efficient total syntheses of several different types of natural products including terpenes, alkaloids and polyketides facilitated by the design of a series of versatile P-chiral phosphorous ligands.

Planar-Chiral Ferrocene-Based N-Heterocyclic Carbene Ligands

In the last few decades, N-heterocyclic carbene (NHC) ligands, characterized by attractive features, have increased their presence in transition-metal catalysis. However, chiral NHC ligands still require further design enhancement to realize far more exciting synthetic applications. This review documents advances in chiral NHC ligands, focusing on planar-chiral ferrocene-based NHCs. As the basic shape of most classes of NHC rings is planar, it seems rational to employ a planar-chiral element in the design of chiral NHC ligands.

Chiral bisoxazoline ligands designed to stabilize bimetallic complexes

Chiral bisoxazoline ligands containing naphthyridine, pyridazine, pyrazole, and phenol bridging units were prepared and shown to form bimetallic complexes with various metal salts. X-ray crystal structures of bis-nickel naphthyridine-bridged, bis-zinc pyridazine-bridged, and bis-nickel as well as bis-palladium pyrazole-bridged complexes were obtained.

Two Stereoinduction Events in One C-H Activation Step: A Route towards Terphenyl Ligands with Two Atropisomeric Axes

Herein we disclose the synthesis of original chiral scaffolds-ortho-orientated terphenyls presenting two atropisomeric Ar-Ar axes. These unusual structures were built up by using the C-H activation approach, and remarkably, both chiral axes were controlled with excellent stereoselectivity in a single transformation. During the reaction, not only does atroposelective functionalization of a biaryl precursor occur to establish one stereogenic axis, but an unprecedented atropo-stereoselective C-H arylation also takes place to generate the second stereogenic element. These enantiomerically pure ortho-terphenyls show an original tridimensional structure and thus constitute a unique foundation for building up a library of enantiomerically pure bidentate ligands, such as the new ligands S/N-Biax and diphosphine BiaxPhos.

A Chiral Ligand Assembly That Confers One-Electron O2 Reduction Activity for a Cu2+ -Selective Metallohydrogel

The design of functional metallohydrogels is attractive but challenging. A rational approach is introduced for designing functional metallohydrogels using chiral ligands, a phenylalanine derivative with a pyridyl group (l/d-PF). Intriguingly, the as-prepared metallohydrogel exhibits excellent O₂ binding and activating properties. Insights into the O₂ binding pathway reveals the presence of a novel [(l+d)-PF-Cu³⁺ -O₂^- ] species, which can efficiently reduce ferric cytochrome c with the reactive O₂^- by receiving an electron from reductant ascorbic acid. This study provides helpful instructions for developing new artificial systems with specific functions through the effective combination of chiral ligands with metal ions.

Renovation of Optically Active Phenanthrolines as Powerful Chiral Ligands for Versatile Asymmetric Metal Catalysis

In the field of asymmetric synthesis, the development of new chiral ligands has been regarded as an attractive challenge for decades. Novel chiral ligands can often have a great impact on synthetic protocols. In this context, we are currently interested in the application of 1,10-phenanthroline (phen) as an entirely new class of chiral ligand. To handle this issue, we designed a chiral phen ligand that provides the N,N,O-tridentate coordination of the phen moiety and an additional phenolic hydroxyl group. As phen possesses greater coordination ability with various ions, our chiral phen ligand would be valuable as one of the "privileged" chiral ligands applied to a broad range of metal catalysts and new reactions. This account summarizes the results of the application of the chiral phen ligand to various kinds of metal catalysis.

Chiral ligands derived from monoterpenes: application in the synthesis of optically pure secondary alcohols via asymmetric catalysis

The preparation of optically pure secondary alcohols in the presence of catalysts based on chiral ligands derived from monoterpenes, such as pinenes, limonenes and carenes, is reviewed. A wide variety of these ligands has been synthesized and used in several catalytic reactions, including hydrogen transfer, C-C bond formation via addition of organozinc compounds to aldehydes, hydrosilylation, and oxazaborolidine reduction, leading to high activities and enantioselectivities.

Total synthesis of (R,R,R)-α-tocopherol through asymmetric Cu-catalyzed 1,4-addition

By introducing a disposable activating substituent at C-3, the asymmetric 1,4-addition to a notoriously unreactive 2-substituted chromenone was achieved with high levels of (2R)-stereoselectivity in the presence of a chiral Cu(I)-phosphoramidite complex as a catalyst. This paved the way for an efficient and conceptually novel synthesis of (R,R,R)-α-tocopherol from readily available starting materials.

Fast, metadynamics-based method for prediction of the stereochemistry-dependent relative free energies of ligand-receptor interactions

The computational approach applicable for the molecular dynamics (MD)-based techniques is proposed to predict the ligand-protein binding affinities dependent on the ligand stereochemistry. All possible stereoconfigurations are expressed in terms of one set of force-field parameters [stereoconfiguration-independent potential (SIP)], which allows for calculating all relative free energies by only single simulation. SIP can be used for studying diverse, stereoconfiguration-dependent phenomena by means of various computational techniques of enhanced sampling. The method has been successfully tested on the β2-adrenergic receptor (β2-AR) binding the four fenoterol stereoisomers by both metadynamics simulations and replica-exchange MD. Both the methods gave very similar results, fully confirming the presence of stereoselective effects in the fenoterol-β2-AR interactions. However, the metadynamics-based approach offered much better efficiency of sampling which allows for significant reduction of the unphysical region in SIP.

Chiral ditopic cyclophosphazane (CycloP) ligands: synthesis, coordination chemistry, and application in asymmetric catalysis

A series of dichlorocyclophosphazanes [{ClP(μ-NR)}2 ] containing chiral and achiral R groups was obtained from simple commercially available amines and PCl3 . Their condensation reactions with axially chiral biaryl diols yielded ansa-bridged chiral cyclophosphazane (CycloP) ligands. This highly modular methodology allows extensive elaboration of the ligand set, in which the chirality can be introduced at the diol bridge and/or the amido R group. This provides the possibility to observe match and mismatch effects in catalysis. A series of twenty CycloP ligands was synthesized and characterized by multinuclear NMR spectroscopy, HRMS, elemental analysis, and in selected cases, single-crystal X-ray diffraction. These studies show that all of the ditopic CycloP ligands are C2 symmetric, rendering their metal coordination sites symmetry equivalent. Two well-established enantioselective reactions were explored by using late-transition metal CycloP complexes as catalysts; the gold-catalyzed hydroamination of γ-allenyl sulfonamides and the asymmetric nickel-catalyzed three-component coupling of a diene and an aldehyde. The steric demands of the CycloP ligands have a subtle influence on the reactivity and selectivity observed in both reactions. Good enantiomeric ratios (e.r.) as high as 89:11 in the gold-catalyzed reaction and 92:8 in the nickel-catalyzed bis-homoallylation reaction were observed.

Nitrogen heterocycles as building blocks for new metallosupramolecular architectures

The syntheses of representative examples of five classes of new heterocyclic ligands are described. These include N,N'-chelating bis-heterocycles, binucleating ligands, cyclometallated compounds, chiral ligands and a family of polyheteroaryl-linked arenes.