Development of Antioxidant and Antimicrobial Membranes Based on Functionalized and Crosslinked Chitosan for Tissue Regeneration

Tissue engineering is an interdisciplinary field that develops new methods to enhance the regeneration of damaged tissues, including those of wounds. Polymer systems containing bioactive molecules can play an important role in accelerating tissue regeneration, mitigating inflammation process, and fighting bacterial infection. Chitosan (CS) has attracted much attention regarding its use in wound healing system fabrication thanks to its biocompatibility, biodegradability, and the presence of functional groups in its structure. In this work, bioactive chitosan-based membranes were obtained by both chemical and physical modifications of the polymer with glycidyl methacrylate and glycerol (GLY), respectively. The most suitable GLY concentration to obtain wound healing systems with good elongation at break, a good water vapor transmission rate (WVTR), and good wettability values was 20% (w/w). Afterwards, the membranes were crosslinked with different concentrations of ethylene glycol dimethacrylate (EGDMA). By using a concentration of 0.05 mM EGDMA, membranes with a contact angle and WVTR values suitable for the application were obtained. To make the system bioactive, 3,4-dihydrocinnamic acid (HCAF) was introduced into the membranes, either by imbibition or chemical reaction, using laccase as a catalyst. Thermal and mechanical analyses confirmed the formation of a cohesive network, which limited the plasticizing effect of GLY, particularly when HCAF was chemically bound. The HCAF-imbibed membrane showed a good antioxidant and antimicrobial activity, highlighting the potential of this system for the treatment of wound healing.

Immobilization of Papain in Chitosan Membranes as a Potential Alternative for Skin Wounds

Papain (an enzyme from the latex of Carica papaya) is an interesting natural bioactive macromolecule used as therapeutic alternative for wound healing due to debridement action in devitalized or necrotic tissues. However, its use in high doses can induce potential skin irritation and side effects. In this study, experiments explored the ability of chitosan membrane to immobilize papain, consequently improving enzymatic activity and controlling enzyme release. Papain-loading capacity was tested via experiments of force microscopy (AFM), scanning electron microscopy (SEM-FEG), and X-ray diffraction analyses. Fourier transform infrared spectroscopy and thermal analyses assessed the enzyme interactions with the copolymer. The investigation of the feasibility of membranes included pH on the surface, elasticity, and breaking strength measurements. The surface wettability and swelling capacity of different formulations revealed the best formulation for in vitro papain release experiments. The membranes had a transparent, rough, crystalline characteristic, which was homogeneous with the membrane within the neutrality. The immobilization of papain in the chitosan membrane resulted in a decrease in the vibration band characteristic of pure papain, suggesting a displacement in the vibration bands in the FTIR spectrum. The presence of papain decreased hydrophobicity on the surface of the membrane and disturbed the membrane's ability to swell. Chitosan membranes containing papain 2.5% (0.04 g) and 5.0% (0.08 g) preserved feasible properties and improved the enzymatic activity compared (0.87 ± 0.12 AU/mg and 1.59 ± 0.10 AU/mg) with a free papain sample (0.0042 ± 0.001 AU/mg). Concentrations of over 10% (0.16 g) led to phase separation into membranes. Chitosan membranes exhibited a slow papain release behavior adjusted via the Higushi model. The experimental achievements suggest a novel and promising method for the enhancement of papain. The results indicate the potential for prolonged bioactivity for use on wounds.

A Free-Standing Chitosan Membrane Prepared by the Vibration-Assisted Solvent Casting Method

Much attention has been paid to the surface modification of artificial skin barriers for the treatment of skin tissue damage. Chitosan is one of the natural materials that could be characterized by its biocompatibility. A number of methods for the preparation of chitosan membranes have been described in scientific articles, including solvent casting methods. This study investigates an improved technology to produce chitosan membranes. Thus, chitosan membranes were prepared using a vibration-assisted solvent casting method. First, aqueous acetic acid was used to pretreat chitosan. Then, free-standing chitosan membranes were prepared by solvent casting on nanoporous anodized aluminum oxide (AAO) membrane templates, allowing for the solvent to evaporate. Using finite element methods, a study was obtained showing the influence of chitosan solutions of different concentrations on the fluid flow into nanopores using high-frequency excitation. The height of the nanopillars and the surface area of the chitosan membrane were also evaluated. In this study, the surface area of the chitosan membrane was found to increase by 15, 10 and 6 times compared to the original flat surface area. The newly produced nanopillared chitosan membranes will be applicable in the fabrication of skin barriers due to the longer nanopillars on their surface and the larger surface area.

Programmable Physical Properties of Freestanding Chitosan Membranes Electrofabricated in Microfluidics

Microfluidic-integrated freestanding membranes with suitable biocompatibility and tunable physicochemical properties are in high demand for a wide range of life science and biological studies. However, there is a lack of facile and rapid methods to integrate such versatile membranes into microfluidics. A recently invented interfacial electrofabrication of chitosan membranes offers an in-situ membrane integration strategy that is flexible, controllable, simple, and biologically friendly. In this follow-up study, we explored the ability to program the physical properties of these chitosan membranes by varying the electrofabrication conditions (e.g., applied voltage and pH of alginate). We found a strong association between membrane growth rate, properties, and fabrication parameters: high electrical stimuli and pH of alginate resulted in high optical retardance and low permeability, and vice versa. This suggests that the molecular alignment and density of electrofabricated chitosan membranes could be actively tailored according to application needs. Lastly, we demonstrated that this interfacial electrofabrication could easily be expanded to produce chitosan membrane arrays with higher uniformity than the previously well-established flow assembly method. This study demonstrates the tunability of the electrofabricated membranes' properties and functionality, thus expanding the utility of such membranes for broader applications in the future.

Chitosan Micro-Membranes with Integrated Gold Nanoparticles as an LSPR-Based Sensing Platform

Currently, there is an increasing need to develop highly sensitive plasmonic sensors able to provide good biocompatibility, flexibility, and optical stability to detect low levels of analytes in biological media. In this study, gold nanoparticles (Au NPs) were dispersed into chitosan membranes by spin coating. It has been demonstrated that these membranes are particularly stable and can be successfully employed as versatile plasmonic platforms for molecular sensing. The optical response of the chitosan/Au NPs interfaces and their capability to sense the medium's refractive index (RI) changes, either in a liquid or gas media, were investigated by high-resolution localized surface plasmon resonance (HR-LSPR) spectroscopy, as a proof of concept for biosensing applications. The results revealed that the lowest polymer concentration (chitosan (0.5%)/Au-NPs membrane) presented the most suitable plasmonic response. An LSPR band redshift was observed as the RI of the surrounding media was incremented, resulting in a sensitivity value of 28 ± 1 nm/RIU. Furthermore, the plasmonic membrane showed an outstanding performance when tested in gaseous atmospheres, being capable of distinguishing inert gases with only a 10^-5 RI unit difference. The potential of chitosan/Au-NPs membranes was confirmed for application in LSPR-based sensing applications, despite the fact that further materials optimization should be performed to enhance sensitivity.

Effect of Chitosan and Aloe Vera Extract Concentrations on the Physicochemical Properties of Chitosan Biofilms

Chitosan films have been extensively studied as dressings in formulations for the treatment of chronic wounds. The incorporation of aloe vera (Aloe barbadensis Miller) into chitosan dressings could potentialize the healing process since aloe vera shows several pharmacological activities. This work aimed to evaluate the effect of aloe vera and chitosan concentrations on the physicochemical properties of the developed films. The films were obtained by casting technique and characterized with respect to their color parameters, morphology, barrier and mechanical properties, and thermal analysis. Results showed that the presence of aloe vera modified the films′ color parameters, changed barrier properties, increased fluid handling capacity (FHC), and decreased water-vapor permeability (WVP). The reduced elongation at break resulted in more rigid films. Aloe vera concentration did not significantly change film properties, but the presence of this gel increased the films’ stability at temperatures below 200 °C, showing similar behavior as chitosan films above 400 °C. The results suggest a crosslinking/complexation between chitosan and aloe vera, which combine appropriate physicochemical properties for application as wound dressing materials.

Impact of chitosan membrane culture on the expression of pro- and anti-inflammatory cytokines in mesenchymal stem cells

Osteoarthritis (OA) is a chronic inflammatory joint condition caused by various inflammatory cytokines. The pro-inflammatory cytokines controlling OA include interleukin (IL)-1β, tumor necrosis factor (TNF)-α, IL-6 and IL-18. The anti-inflammatory cytokines include IL-4, IL-10, IL-13, leukemia inhibitory factor (LIF), glycoprotein 130 (IL6ST), TNF-α-stimulated gene 6 and transforming growth factor (TGF)-β1. Mesenchymal stem cells (MSCs) serve an anti-inflammatory role in the treatment of OA by secreting various cytokines. Previous studies demonstrated that the anti-inflammatory ability of MSCs decreased rapidly in a traditional plate culture. Maintaining the anti-inflammatory properties of MSCs in vitro remains challenging. Therefore, it is necessary to develop a more stable and efficient method to culture MSCs in vitro. Chitosan is a deacetylated derivative of chitin and is the second most abundant natural polysaccharide worldwide. The present study demonstrated that that MSCs cultured on chitosan membranes (CM) spontaneously formed multicellular spheroids. Compared with the control group without CM, the formation of multicellular spheres in the CM enhanced the anti-inflammatory properties of MSCs. Expression levels of pro- and anti-inflammatory genes mRNA and their proteins in MSCs were detected by reverse transcription-quantitative PCR, western blot analysis and immunofluorescence assay. Protein and mRNA expression levels of pro-inflammatory cytokines IL-1β, TNF-α, IL-6 and IL-18 were significantly decreased in CM-cultured MSCs compared with the control group (P<0.05). Furthermore, mRNA and protein expression levels of anti-inflammatory cytokines TGF-β1 in CM-cultured MSCs were significantly increased compared with the control group (P<0.01). These results indicated that the formation of multicellular spheroids by CM-cultured MSCs aided in maintaining anti-inflammatory effects.

Modification of Chitosan Membranes via Methane Ion Beam

Chitosan has been used for biomedical applications in recent years, primarily because of its biocompatibility. A chitosan membrane with a 30 μm thickness was prepared and investigated for its surface modification using methane ions. Methane ions were implanted into the chitosan membrane using a Kaufman ion source; bombardment was accomplished using three accelerating voltages of ion beams—30, 55, and 80 kV. The influence of the ion bombardment on morphology, crystallinity, and hydrophilicity was investigated. Attenuated total reflectance Fourier-transform infrared (ATR-FTIR) spectroscopy analysis showed that a triplet bond appeared after the implantation of methane ions (acceleration voltage: 80 kV), culminating in the creation of a more amorphous membrane structure. The analyses of atomic force microscopy (AFM) images showed that, with the increase in bombardment energy, the roughness of the surface changed. These results revealed that ion bombardment improved the hydrophilicity of the membranes and the water fluxes of chitosan membranes altered after methane ion bombardment.

Chitosan Membrane Modified With a New Zinc(II)-Vanillin Complex Improves Skin Wound Healing in Diabetic Rats

The treatment of chronic wounds is considered a public health problem. When the condition affects at-risk groups such as those with diabetics, it becomes a great clinical challenge. In this work, we evaluated the healing effects of a new zinc complex, [Zn(phen)(van)2], identified as ZPV, which was synthesized, characterized and associated with chitosan (CS) membranes and tested on cutaneous wounds of diabetic rats. Chitosan membranes were modified by Schiff base reaction with the complex under two experimental conditions (14 and 21 days), resulting in membranes with concentrations of complex equal to 0.736 μmol cm-2 (CS-ZPV1) and 1.22 μmol cm-2 (CS-ZPV2). Release assays in aqueous medium indicated that the membranes release the complex gradually when exposed to an aqueous medium. Diabetes was inducted in Wistar rats using 40 mg/kg (i.v.) streptozotocin. On the 7th day after diabetic induction, a circular excision on the skin (1.0 cm) was performed with a punch. The lesions were treated with the pure chitosan membrane and the membrane associated with the zinc-vanillin complex in two different doses. Skin samples were subjected to macroscopic and histopathological analyses, cytokine (TNF-α, IL-1β, and IL-10) quantification and reverse transcriptase polymerase chain reaction (TGF-β and VEGF) assays. The analyses showed a decrease in wound size, reepithelialization, angiogenic stimulus, collagen deposition, and reduced levels of TNF-α and IL-1β as well as increased IL-10 and gene expression of TGF-β and VEGF. The evaluated parameters suggest that CS-ZPV in the two concentrations tested may be effective in the treatment of chronic wounds.

Killing Two Birds with One Stone: Coating Ag NPs Embedded Filter Paper with Chitosan for Better and Durable Point-of-Use Water Disinfection

In this study, porous chitosan (CS) coated Ag NPs embedded filter paper (CAEFP) was fabricated for point-of-use water disinfection application. Thanks for the presence of CS coating, the tensile strength of the CAEFP in wet condition was found to be 1.8 MPa, 700% increase compared with where there was no CS coating, making it much more durable. In addition, the coating with CS could greatly boost the Ag NPs loading without worrying about the excessive release of Ag into the treated water, thereby significantly improving the bactericidal efficiency but still be safe to drink in terms of Ag release. Furthermore, by controlling the amount of CS used, the flow rate and bactericidal efficiency of the CAEFP could be manipulated (customized). When the CS content increased from 0.5 to 2.0 wt %, the flow rate of CAEFP would drop from 9.3 to 0.53 L/min/m², and the bactericidal efficiency against Escherichia coli and Bacillus subtilis could improve from 4 and 3.6 to 4.9 and 4.8 log reduction, respectively. At optimum condition, the total Ag in treated water by CAEFP was below 45 μg/L, only 1/10 of that from Ag NPs loaded filter paper without CS coating, half of the WHO drinking water requirement (<100 μg/L). Natural surface water samples were used for the demonstration of the bactericidal performance of the CAEFP. Both the total bacterial and E. coli counts met the WHO standard.

Organophosphate Hydrolase in Conductometric Biosensor for the Detection of Organophosphate Pesticides

The research has developed an enzyme biosensor for the detection organophosphate pesticide residues. The biosensor consists of a pair of screen-printed carbon electrode (SPCEs). One of electrodes contains immobilized organophosphate hydrolase (OPH) on a chitosan membrane by cross-linking it with glutaraldehyde. The area of the electrodes was optimized to 3, 5, and 7 mm(2). The OPH was isolated from Pseudomonas putida, and was purified by the ammonium sulfate precipitation method, with 6444 ppm (A) and 7865 ppm (B). The organophosphate pesticide samples were 0-100 ppb in tris-acetate buffer 0.05 M, pH 8.5. The results showed that the best performance of the biosensor was achieved by the enzyme A with an electrode area of 5 mm(2). The sensitivity of the biosensor was between 3 and 32 µS/ppb, and the detection limit for the organophosphate pesticides was 40 ppb (diazinon), 30 ppb (malathion), 20 ppb (chlorpyrifos), and 40 ppm (profenofos).

Chitosan membranes in a rat model of full-thickness cutaneous wounds: healing and IL-4 levels

OBJECTIVE

The aim of this study was to examine the effect of chitosan membrane on wound healing.

METHOD

The effect of chitosan membranes was evaluated in an experimental rat model. On day 0, circular full-thickness skin sections were excised from the scalps of rats. The wounds were then measured and the surrounding area tattooed. Rats were sacrificed either immediately after excision, or randomised into control and chitosan groups and followed up on day 3, 7, 14 or 21. Control group wounds were covered with Aquacel (wound dressing). Chitosan group wounds were covered with chitosan membranes and the wound dressing. Wounds and the distances between the tattooed marks were measured on follow-up, the wound sites were harvested and histologically examined, and serum interleukin (IL-4) levels were analysed.

RESULTS

A total of 54 rats were examined and all time points included 6 control and 6 chitosan treated animals, except for day 0 which consisted of control animals only. On day 3, wounds in the chitosan group were significantly (p<0.05) smaller (60±6% versus 78±19% of the original wound area) than in the control group. Chitosan membranes were found to degrade at the wound sites between days 7 and 14. Leukocyte counts were lower in the chitosan group than in the control group on day seven (p<0.05). IL-4 levels were significantly higher on day 7 (p<0.001) and 14 (p<0.001) in the chitosan group.

CONCLUSION

According to our results chitosan membrane may promote early wound healing, reduce inflammation and affect the IL-4 pathway, however, the membrane degrades at the wound site after day 7.

Evaluation of biocompatibility and degradation of chitosan nanofiber membrane crosslinked with genipin

Chitosan, a natural polysaccharide, has demonstrated potential as a degradable biocompatible guided bone regeneration membrane. This study aimed to evaluate the in vivo biocompatibility and degradation of chitosan nanofiber membranes, with and without genipin crosslinking as compared with a commercial collagen membrane in rat model. Chitosan nanofiber membranes, with and without genipin crosslinking, and collagen membrane (control) were implanted subcutaneously in the backs of 30 rats. The membranes were analyzed histologically at 2, 4, 8, 12, 16, and 20 weeks. Sections were viewed and graded by a blinded pathologist using a 4-point scoring system (0 = absent, 1 = mild, 2 = moderate, and 3 = severe) to determine the tissue reaction to the membranes and to observe membrane degradation. There was no statistically significant difference in histological scores among chitosan and collagen membranes at different time points. Absence or minimal inflammation was observed in 57-74% of the membranes across all groups. Most chitosan membranes persisted for 16-20 weeks, whereas most collagen membranes disappeared by resorption at 12-16 weeks. The general tissue response to chitosan nanofiber membranes with and without genipin crosslinking, was similar to that of control commercial collagen membrane. However, the chitosan membranes exhibited slower degradation rates than collagen membranes.

Highly sensitive chemiluminescence immunoassay on chitosan membrane modified paper platform using TiO2 nanoparticles/multiwalled carbon nanotubes as label

A highly sensitive chemiluminescence (CL) immunoassay was incorporated into a low-cost microfluidic paper-based analytical device (μ-PAD) to fabricate a facile paper-based CL immunodevice (denoted as μ-PCLI). This μ-PCLI was constructed by covalently immobilizing capture antibody on a chitosan membrane modified μ-PADs, which was developed by simple wax printing methodology. TiO2 nanoparticles coated multiwalled carbon nanotubes (TiO2/MWCNTs) were synthesized as an amplification catalyst tag to label signal antibody (Ab2). After sandwich-type immunoreactions, the TiO2/MWCNTs were captured on the surface of μ-PADs to catalyze the luminol-p-iodophenol-H2O2 CL system, which produced an enhanced CL emission. Using prostate-specific antigen as a model analyte, the approach provided a good linear response range from 0.001 to 20 ng/mL with a low detection limit of 0.8 pg/mL under optimal conditions. This μ-PCLI showed good reproducibility, selectivity and stability. The assay results of prostate-specific antigen in clinical serum samples were in good agreement with that obtained by commercially used electrochemiluminescence methods at the Cancer Research Center of Shandong Tumor Hospital (Jinan, Shandong Province, China). This μ-PCLI could be very useful to realize highly sensitive, qualitative point-of-care testing in developing or developed countries.

Inhibitory effect of biopolymer materials on scar formation following trabeculectomy

AIM

To investigate the inhibitory effects of amniotic membrane, polylactic acid membrane and chitosan membrane on scar formation following trabeculectomy.

METHODS

A total of 24 New Zealand white rabbits (48 eyes) were randomly divided into 4 groups: amniotic membrane group, polylactic acid membrane group, chitosan membrane group, and control group, with 6 rabbits (12 eyes) in each group. The left eyes underwent routine trabeculectomy, and the right eyes were considered as controls. Amniotic membrane, polylactic acid membrane and chitosan membrane were respectively installed under sclera flap in three groups, but any treatment was not applied in control group. Intraocular pressure, conjunctival filtering bleb, and anterior chamber inflammation responses were monitored at day 1, 3, 7, 14, 28 and 56 post-operatively. Eyeball tissue underwent histopathological examination at day 56 post-operatively.

RESULTS

Fibrocytes and inflammatory cells were reduced in amniotic membrane, polylactic acid membrane and chitosan membrane groups compared to that in control group. At day 1 post-operatively, intraocular pressure was decreased in three membrane groups compared to that in control group. At day 14 post-operatively, the intraocular pressure was decreased significantly, while it of three membrane groups was significantly lower than that of preoperative (P<0.01). There were no significant differences among three membrane groups (P>0.05). Filtering bleb of four groups was clearly observed at day 7 post-operatively, but there was no significant difference in pair-wise comparison. At day 28 and 56 post-operatively, filtering bleb in control group was significantly narrowed compared to that in three membrane groups (P<0.05), but there was no significant difference in pair-wise comparison of three membrane groups.

CONCLUSION

All amniotic membrane, polylactic acid membrane and chitosan membrane can effectively inhibit scar formation following trabeculectomy, the effect of amniotic membrane is the best.