-CoOTe ( = S, Se, and P) with Oxygen/Tellurium Dual Vacancies and Banana Stem Fiber-Derived Carbon Fiber s Battery-Type Cathode and Anode Materials for Asymmetric Supercapacitor

In this work, we demonstrated the synthesis of anions (X = selenium (Se), sulfur (S), and phosphorus (P)) doped cobalt oxytelluride (X-CoOTe) with oxygen and tellurium dual vacancies using hydrothermal methods, followed by selenization, sulfurization, and phosphorization reactions. Especially, the Se-CoOTe-modified nickel foam (Se-CoOTe/NF) electrode delivered a higher specific capacity (752.95 C/g) and an extremely lower charge transfer resistance (0.87 Ω) than S-CoOTe/NF and P-CoOTe/NF due to the higher metallic conductivity of Se. Both oxygen and tellurium vacancies facilitate higher charge transfer conductivity, specific capacity, and stability. On the other hand, banana stem core fiber-derived activated carbon fiber (AC) with exfoliated carbon sheet, cracked surface, and corresponding high surface area boosts the excellent cycle stability up to 4000 cycles with capacitance retention of 100.29%. Thus, the asymmetric device (Se-CoOTe/NF//AC/NF) exhibited an extendable cell voltage (1.55 V), higher energy density (155.6 W h kg-1) at a power density (1356.2 W kg-1), and generous long-term stability (100% retention up to 10 000 cycles) in a liquid alkaline electrolyte. In the practicability test, the proposed asymmetric device mutually showed an increased operating voltage from 1.55 to 4.65 V for a three-series connection. In a three-series connection, a single white LED and an LED string glowed efficiently. This new finding will be very useful to develop tellurium-based chalcogenides and biowaste-derived carbon for energy storage applications.

Synergistically Assembled Cobalt-Telluride/Graphene Foam with High-Performance Electromagnetic Wave Absorption in Both Gigahertz and Terahertz Band Ranges

Electromagnetic wave (EMW)-absorbing materials have a great impact on civil use and national defense. In this paper, a novel composite, RGO@6CoTe₂-300 (the mass ratio of reduced graphene oxide to CoTe₂ is 1:6, annealed at 300 °C), has been obtained through a facile melt-diffusion method and solvothermal method. The as-prepared samples have shown excellent reflection losses (RL) and effective adsorption bandwidth (EAB) by controlling the loading of CoTe₂ and the annealing temperature. The sample has exhibited a RL of -62.2 dB at 13.04 GHz with the matching thickness of 3.53 mm, and the EAB reaches 8.2 GHz at 2-18 GHz. Moreover, excellent terahertz (THz) absorption property is also obtained at 0.2-2.0 THz. A RL of 54.07 dB is acquired, and the EAB covers 100% of the entire measured bandwidth. Thus, RGO@6CoTe₂-300 can be considered as a promising EMW absorption material in both gigahertz and terahertz band ranges.

Efficient Photoelectrochemical Water Splitting by Tailoring MoS2/CoTe Heterojunction in a Photoelectrochemical Cell

Solar energy conversion through photoelectrochemical water splitting (PEC) is an upcoming promising technique. MoS2/CoTe heterostructures were successfully prepared and utilized for PEC studies. MoS2 and CoTe were prepared by a hydrothermal method which were then ultrasonicated with wt. % ratios of 1:3, 1:1 and 3:1 to prepare MoS2/CoTe (1:3), MoS2/CoTe (1:1) and MoS2/CoTe (3:1) heterostructure, respectively. The pure materials and heterostructures were characterized by XRD, UV-vis-DRS, SEM, XPS, PL and Raman spectroscopy. Photoelectrochemical measurements were carried out by linear sweep voltammetry and electrochemical impedance spectroscopic measurements. A maximum photocurrent density of 2.791 mA/cm2 was observed for the MoS2/CoTe (1:1) heterojunction which is about 11 times higher than the pristine MoS2. This current density was obtained at an applied bias of 0.62 V vs. Ag/AgCl (1.23 V vs. RHE) under the light intensity of 100 mW/cm2 of AM 1.5G illumination. The enhanced photocurrent density may be attributed to the efficient electron-hole pair separation. The solar to hydrogen conversion efficiency was found to be 0.84% for 1:1 MoS2/CoTe, signifying the efficient formation of the p-n junction. This study offers a novel heterojunction photocatalyst, for PEC water splitting.

Architecting a Mesoporous N-Doped Graphitic Carbon Framework Encapsulating CoTe2 as an Efficient Oxygen Evolution Electrocatalyst

To improve the efficiency of cobalt-based catalysts for water electrolysis, tremendous efforts have been dedicated to tuning the composition, morphology, size, and structure of the materials. We report here a facile preparation of orthorhombic CoTe₂ nanocrystals embedded in an N-doped graphitic carbon matrix to form a 3D architecture with a size of ∼500 nm and abundant mesopores of ∼4 nm for the oxygen evolution reaction (OER). The hybrid electrocatalyst delivers a small overpotential of 300 mV at 10 mA cm^-2, which is much lower than that for pristine CoTe₂ powder. After cycling for 2000 cycles or driving continual OER for 20 h, only a slight loss is observed. The mesoporous 3D architecture and the strong interaction between N-doped graphitic carbon and CoTe₂ are responsible for the enhancement of the electrocatalytic performance.

Morphology-Controllable Synthesis of Cobalt Telluride Branched Nanostructures on Carbon Fiber Paper as Electrocatalysts for Hydrogen Evolution Reaction

Cobalt telluride branched nanostructures on carbon fiber paper (CFP) with two different morphologies were synthesized via solution-based conversion reaction. Both the CoTe2 with nanodendrite and CoTe with nanosheet morphologies on the CoTe2 nanotube (CoTe2 NDs/CoTe2 NTs and CoTe NSs/CoTe2 NTs) supported by CFP exhibit high activities toward hydrogen evolution reaction (HER). Particularly, the CoTe NSs/CoTe2 NTs only require an overpotential of 230.0 mV to deliver the current density of 100 mA cm(-2) in acid solution. After cycling for 5000 cycles or 20 h continual electrolysis, only a small performance loss is observed.

Formation of Semimetallic Cobalt Telluride Nanotube Film via Anion Exchange Tellurization Strategy in Aqueous Solution for Electrocatalytic Applications

Metal telluride nanostructures have demonstrated several potential applications particularly in harvesting and storing green energy. Metal tellurides are synthesized by tellurization process performed basically at high temperature in reducing gas atmosphere, which makes the process expensive and complicated. The development of a facile and economical process for desirable metal telluride nanostructures without complicated manipulation is still a challenge. In an effort to develop an alternative strategy of tellurization, herein we report a thin film formation of self-standing cobalt telluride nanotubes on various conducting and nonconducting substrates using a simple binder-free synthetic strategy based on anion exchange transformation from a thin film of cobalt hydroxycarbonate nanostructures in aqueous solution at room temperature. The nanostructured films before and after ion exchange transformation reaction are characterized using field emission scanning electron microscope, energy dispersive X-ray analyzer, X-ray photoelectron spectroscopy, thin film X-ray diffraction technique, high resolution transmission electron microscope, and selected area electron diffraction analysis technique. After the ion exchange transformation of nanostructures, the film shows conversion from insulator to highly electrical conductive semimetallic characteristic. When used as a counter electrode in I3(-)/I(-) redox electrolyte based dye-sensitized solar cells, the telluride film exhibits an electrocatalytic reduction activity for I3(-) with a demonstration of solar-light to electrical power conversion efficiency of 8.10%, which is highly competitive to the efficiency of 8.20% exhibited by a benchmarked Pt-film counter electrode. On the other hand, the telluride film electrode also demonstrates electrocatalytic activity for oxygen evolution reaction from oxidation of water.