Variations in size-specific effective dose with patient stature and beam width for kV cone beam CT imaging in radiotherapy

The facilities now available on linear accelerators for external beam radiotherapy enable radiation fields to be conformed to the shapes of tumours with a high level of precision. However, in order for the treatment delivered to take advantage of this, the patient must be positioned on the couch with the same degree of accuracy. Kilovoltage cone beam computed tomography systems are now incorporated into radiotherapy linear accelerators to allow imaging to be performed at the time of treatment, and image-guided radiation therapy is now standard in most radiotherapy departments throughout the world. However, because doses from imaging are much lower than therapy doses, less effort has been put into optimising radiological protection of imaging protocols. Standard imaging protocols supplied by the equipment vendor are often used with little adaptation to the stature of individual patients, and exposure factors and field sizes are frequently larger than necessary. In this study, the impact of using standard protocols for imaging anatomical phantoms of varying size from a library of 193 adult phantoms has been evaluated. Monte Carlo simulations were used to calculate doses for organs and tissues for each phantom, and results combined in terms of size-specific effective dose (SED). Values of SED from pelvic scans ranged from 11 mSv to 22 mSv for male phantoms and 8 mSv to 18 mSv for female phantoms, and for chest scans from 3.8 mSv to 7.6 mSv for male phantoms and 4.6 mSv to 9.5 mSv for female phantoms. Analysis of the results showed that if the same exposure parameters and field sizes are used, a person who is 5 cm shorter will receive a size SED that is 3%-10% greater, while a person who is 10 kg lighter will receive a dose that is 10%-14% greater compared with the average size.

Evaluation of the impact of reference tooth morphology and alignment on model measurement accuracy

Background

The development of personalized and high-precision dental treatment is inseparable from the accurate measurement and analysis of the model. Compared with traditional plaster models, digital models allow dentists to obtain richer and more detailed inspection results. However, the measurement of digital models in clinical practice usually ignores the influence of the overall three-dimensional (3D) structure of teeth and tooth arrangement on the measurement results. The purpose of this study was to evaluate the effect of calibrated tooth axis and tooth arrangement on tooth width and arch length.

Methods

A total of 110 digital models from 80 participants were used to measure teeth width and dental arch length using the following methods: Method A, simple positioning of the proximal and distal of teeth; Method B: calibration of the clinical crown axis; and Method C: calibration of the overall 3D axis of the teeth. The Measurand model included pre- and post-orthodontic models of the same patients to assess the impact of tooth alignment on outcomes.

Results

In the aligned dentition, whether the tooth axis was calibrated had no effect on the measurement results. On unaligned dentitions, calibrating the pinion allowed for more accurate measurements, with Method C the closest to the true size. Furthermore, the arrangement of teeth affected the measurement, but there was no continuous linear correlation with arch length discrepancy (ALD).

Conclusions

Clinicians should choose appropriate measurement methods according to actual needs when performing model measurement, and should pay attention to the influence of tooth axis, tooth shape, and arrangement on the measurement results.

Setup Error Assessment and Correction in Planar kV Image- Versus Cone Beam CT Image-Guided Radiation Therapy: A Clinical Study of Early Breast Cancer Treated With External Beam Partial Breast Irradiation

Objective:

To compare differences in setup error assessment and correction between planar kilovolt images and cone beam computed tomography images for external beam partial breast irradiation during free breathing.

Methods:

Nineteen patients who received external beam partial breast irradiation after breast-conserving surgery were recruited. Interfraction setup error was acquired using planar kilovolt images and cone beam computed tomography. After online setup correction, the residual error was calculated, and the setup error was compared. The residual error and setup margin were quantified for planar kilovolt and cone beam computed tomography images.

Results:

The largest setup error was observed in the anteroposterior direction for both cone beam computed tomography and planar kilovolt imaging (−1.45 mm, 1.74 mm). The cone beam computed tomography–based setup error (systematic error [Σ]) was less than the planar kilovolt images based on Σ in the anteroposterior direction (–1.2 mm vs 2.00 mm; P = .005), and no significant differences were observed for random error (σ) in 3 dimensions (P = .948, .376, .314). After online setup correction, cone beam computed tomography significantly reduced the residual setup error compared with planar kilovolt images in the anteroposterior direction (Σ: −0.20 mm vs 0.50 mm, P = .008; σ: 0.45 mm vs 1.34 mm, P = .002). The cone beam computed tomography–based setup margin was smaller than the planar kilovolt image-based setup margin in the anteroposterior direction (−1.39 mm vs 5.57 mm, P = .003; 0.00 mm vs 3.20 mm, P = .003).

Conclusions:

Discrepancy between the setup errors observed with planar kilovolt and cone beam computed tomography was obvious in the anteroposterior direction. Compared to cone beam computed tomography, the elapsed treatment time was smaller when the initial alignment used kilovolt planar imaging. Whether using planar kilovolt or cone beam computed tomography, residual errors can be reduced to 1.5 mm for external beam partial breast irradiation procedures.

The anomalous canal between two accessory foramina on the mandibular ramus: the temporal crest canal

OBJECTIVES

The temporal crest canal (TCC) is a variation of the bony canal with two accessory foramina that correspond to an entrance and an exit on the mandibular ramus. This study investigated the anatomical characteristics of the TCC using CBCT.

METHODS

The study population consisted 446 patients who had undergone CBCT. Sagittal, cross-sectional and three-dimensional images were evaluated for the presence of a TCC. The canals were classified into two types according to the configuration, and the location of the posterior accessory foramen of the TCC was also recorded.

RESULTS

6 TCCs were present in 4 of 446 patients (0.90% of the total population). All of the TCCs were observed in males, and all of the posterior foramina were located superior to the mandibular foramina on the medial aspect of the mandibular ramus. There were five noticeably curved and increasingly narrow canals (Type 1) and one slightly curved and uniformly wide canal (Type 2).

CONCLUSIONS

Precise knowledge of the TCC is clinically important for suitable local anaesthetic nerve block and the planning of surgical procedures that involve the mandibular ramus. Three-dimensional images of CBCT data are particularly effective for confirming the presence of this variation.