Medium-Entropy Monosilicates Deliver High Corrosion Resistance to Calcium-Magnesium Aluminosilicate Molten Salt

For decreasing the global cost of corrosion, it is essential to understand the intricate mechanisms of corrosion and enhance the corrosion resistance of materials. However, the ambiguity surrounding the dominant mechanism of calcium-magnesium aluminosilicate (CMAS) molten salt corrosion in extreme environments hinders the mix-and-matching of the key rare earth elements for increasing the resistance of monosilicates against corrosion of CMAS. Herein, an approach based on correlated electron microscopy techniques combined with density functional theory calculations is presented to elucidate the complex interplay of competing mechanisms that control the corrosion of CMAS of monosilicates. These findings reveal a competition between thermodynamics and kinetics that relies on the temperatures and corrosion processes. Innovative medium-entropy monosilicates with exceptional corrosion resistance even at 1500 °C are developed. This is achieved by precisely modulating the radii of rare earth ions in monosilicates to strike a delicate balance between the competition in thermodynamics and kinetics. After 50 and 100 h of corrosion, the thinnest reactive layers are measured to be only 28.8 and 35.4 µm, respectively.

Recovery Mechanisms in Aged Kesterite Solar Cells

For successful long-term deployment and operation of kesterites Cu₂ZnSn(S _x Se_1-x )₄ (CZTSSe) as light-absorber materials for photovoltaics, device stability and recovery in kesterite solar cells are investigated. A low-temperature heat treatment is applied to overcome the poor charge extraction that developed in the natural aging process. It is suggested that defect states at aged CZTSSe/CdS heterojunctions were reduced, while apparent doping density in the CZTSSe absorber increased due to Cd/Zn interdiffusion at the heterojunction during the annealing process. In situ annealing experiments in a transmission electron microscope were used to investigate the elemental diffusion at the CZTSSe/CdS heterojunction. This study reveals the critical role of heat treatment to enhance the absorber/Mo back contact, improve the quality of the absorber/buffer heterojunction, and recover the device performance in aged kesterite thin-film solar cells.

Defects and Surface Electrical Property Transformation Induced by Elemental Interdiffusion at the p-n Heterojunction via High-Temperature Annealing

Heterojunction annealing is widely used to improve the efficiency of kesterite thin-film solar cells. However, the efficiency will decrease when the annealing temperature is high, and the reason why high-temperature postdeposition annealing results in the deterioration of device performance is not well-studied, which restricts the efficiency promotion of kesterite solar cells. This study investigates the effect of high-temperature postdeposition annealing on the p-n heterojunction and, thus, on the performance of the solar cell. The surface potential of the absorber layer inverts, the number of deep-level defects increases, and the CdS/CZTSe interface barrier height increases after high-temperature postdeposition annealing. A combination of different characterization methods reveals that excessive elemental diffusion at the p-n heterojunction during high-temperature postdeposition annealing is the key reason for deterioration of the performance of CZTSe devices. This study discloses the mechanism for the change in device properties with high-temperature postdeposition annealing and will also be helpful for understanding the mechanism of efficiency change as the solar cell keeps working.

Improvement of Laser Transmission Welding of Glass with Titanium Alloy by Laser Surface Treatment

Laser surface treatment of the titanium alloy was locally oxidized on the metal surface to improve the joint strength of laser transmission welding of high borosilicate glass with titanium alloy. The results find that the welding strength was increased 5 times. The welding mechanism was investigated by the morphology of the welded parts, the tensile-fracture failure mode, the diffusion of the interface elements, and the surface free energy. The results show that there are many adherents between the titanium alloy and high borosilicate glass after tensile fracture, the welding strength was higher when the laser voltage was 460 V, and the tensile⁻fracture failure mode is mainly ductile fracture. Element-line scanning analysis revealed that elemental diffusion occurred in the two materials, which is an important reason for the high welding strength. Surface free-energy analysis shows that laser surface treatment improves the surface free energy of titanium alloy, promotes the wettability and compatibility, and increases the welding strength of titanium alloy with glass.

Insights into the Silver Reflection Layer of a Vertical LED for Light Emission Optimization

In this work, Ag as a highly reflective mirror layer of gallium nitride (GaN)-based blue vertical light-emitting diodes (VLEDs) has been systematically investigated by correlating scanning electron microscopy/energy dispersive X-ray spectroscopy/transmission Kikuchi diffraction/electron backscatter diffraction, aberration-corrected scanning transmission electron microscopy, and atomic force microscopy techniques. In the context of high-efficiency lighting, three critical aspects have been scrutinized on the nanoscale: (1) chemical diffusion, (2) grain morphology, and (3) surface topography of the Ag layer. We found that nanoscale inhomogeneous distribution of In in InGaN/GaN quantum wells (QWs), interfacial diffusion (In/Ga out-diffusion into the Ag layer and diffusion of Ag into p-GaN and QWs), and Ag agglomeration deteriorate the light reflectivity, which account for the decreased luminous efficiency in VLEDs. Meanwhile, the surface morphology and topographical analyses revealed the nanomorphology of the Ag layer, where a nanograin size of ∼300 nm with special nanotwinned boundaries and an extremely smooth surface of ∼3-4 nm are strongly desired for better reflectivity. Further, on the basis of these microscopy results, suggestions on light extraction optimization are given to improve the performance of GaN-based blue VLEDs. Our findings enable fresh and deep understanding of performance-microstructure correlation of LEDs on the nanoscale, providing guidance to the design and manufacture of high-performance LED devices.

Exciton Quenching Due to Copper Diffusion Limits the Photocatalytic Activity of CdS/Cu2S Nanorod Heterostructures

The formation of donor/acceptor junctions in hybrid nanomaterials is predicted to enhance photocatalytic activity as compared to single-component semiconductor systems. Specifically, nanomaterials containing a junction of n-type cadmium sulfide (CdS) and p-type copper sulfide (Cu2S) formed via cation exchange have been proposed as potential photocatalysts for reactions such as water splitting. Herein, we study the elemental distribution of Cu within these nanostructures using analytical transmission electron microscopy techniques. The resulting effects of this elemental distribution on photocatalytic activity and charge dynamics were further studied using a model photoreduction reaction and transient absorption spectroscopy. We find that copper diffusion in the hybrid nanostructure quenches the exciton lifetime and results in low photocatalytic activity; however, this effect can be partially mitigated via selective extraction. These results provide a deeper understanding of the physical processes within these hybrid nanostructures and will lead to more rational design of photocatalyst materials.