Chemical stability of active ingredients in diluted veterinary disinfectant solutions under simulated storage conditions

Introduction: The product labels of veterinary disinfectants specify their expiration dates to prevent the use of outdated products, as these may result in disinfection and biosecurity failures during outbreak situations. However, a clear standard for the storage conditions of diluted disinfectant solutions has not yet been established, and the effects of storage conditions have scarcely been investigated. To fill this research gap, our study examined the stability of the active ingredients of diluted veterinary disinfectants based on their change in concentrations when stored at various temperatures for various time periods. Methods: Twenty veterinary disinfectants effective against either foot-and-mouth disease or avian influenza viruses were selected. The disinfectants were diluted to effective concentrations following the manufacturer's instructions. Using selective analytical techniques, the concentrations of the active ingredients of the samples that had been stored for varying intervals at different temperatures (4, 20, 30, and 45°C) were determined. These samples included soaps and detergents, acids, oxidizing agents, aldehydes, and copper compounds. The active ingredient concentrations of two of the samples were determined following freezing/thawing cycle, to establish their stability when exposed to simulated winter conditions. Results: Our results showed that most of the active ingredients had concentrations of 90% or greater of their initial concentrations, indicating ≥90% stability over a 21-day period under the experimental storage conditions. However, there were some exceptions. Glutaraldehyde, formaldehyde, and malic acid are over 90% stable at ≤ 30°C for 21 days, but their concentrations decreased to below 90% of their initial concentrations at 45°C, indicating a decline in stability when stored at 45°C for 21 days. The concentrations of potassium peroxymonosulfate and peracetic acid rapidly declined with increasing time and temperature to less than 90% of their initial concentrations. Discussion: Based on our findings, we propose that diluted disinfectant solutions should preferably be prepared daily. However, if the daily preparation of a diluted disinfectant solution is not feasible, then our results can be used as a reference, providing basic scientific data on the chemical stability of diluted disinfectant solutions commonly used in the veterinary field, thus indicating suitable storage conditions.

Determination of Saffron Quality through a Multi-Analytical Approach

Currently, the specifications for the assessment of saffron quality are contained in the ISO 3632 technical standard. This norm evaluates saffron quality through a UV-Vis spectrophotometric method and grades the spice into three commercial categories. However, numerous studies have highlighted several weaknesses and limitations of the ISO method. For this reason, a new multi-analytical approach for the determination of saffron quality is proposed in this work. Different techniques were employed to assess saffron quality: UV-visible spectroscopy (UV-Vis), attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), scanning electron microscopy coupled with energy dispersive X-ray spectroscopy (SEM-EDX) and inductively coupled plasma—optical emission spectroscopy (ICP-OES). The results show that the commercial grading based on the ISO 3632 methodology is not always in line with the observations made with the other techniques. Moreover, the use of two new techniques in the field of saffron quality determination, i.e., SEM-EDX and ICP-OES, proved to be effective for the determination of elemental composition and metal content, which are two important parameters to take into consideration when assessing the quality of the spice.

Comparison of Different Surgical Systems for Treatment of Early-onset Scoliosis in the Context of Release of Titanium Ions

STUDY DESIGN

Case-control study.

OBJECTIVE

The aim of the study was to compare growth-friendly systems: traditional growing rod, guided growth systems (GGS), and vertical expandable prosthetic titanium rib in the context of titanium release.

SUMMARY OF BACKGROUND DATA

The problem of scoliosis affects even up to 3% of the population, and ca. 0.1% of patients need surgical treatment. Surgical treatment carries the risk of a long-term presence of implants in the organism, which may result in release of metal ions into the tissues and bloodstream.

METHODS

Seventy-one patients (13.5 ± 3.54 years' old) were treated for spinal deformity using various surgical systems and the samples of paraspinal tissue, blood, nails, and hair were collected before and after treatment. The quantification of titanium was performed using inductively coupled plasma optical emission spectrometry.

RESULTS

The metallic particles were released into the peri-implant tissue, and the greatest amounts of titanium were detected in patients with GGS. The concentration of soluble titanium forms in subcutaneous tissue (ST) was low and do not statistically differ from control. The average titanium content in the paraspinal tissue in patients with GGS was two- to three-fold higher than the average value in the other investigated groups. A slightly increased level of titanium compared with the control was noted in all studied groups of patients. The highest content of titanium in blood was observed in patients with the GGS system.

CONCLUSION

Neverless the system used, the concentration of soluble titanium forms in both ST and blood was only slightly higher than in the control and did not exceed the allowable levels. The increased level of titanium with GGS system is probably associated with the friction between implant components, whereas the components in the other systems are immobile relative to each other.Level of Evidence: 3.

Inductively coupled plasma optical emission spectroscopy as a tool for evaluating lateral flow assays

Lateral flow assays (LFAs) are immunochromatographic point-of-care devices that have greatly impacted disease diagnosis through their rapid, inexpensive, and easy-to-use form factor. While LFAs have been successful as field-deployable tools, they have a relatively poor limit of detection when compared to more complex methods. Moreover, most design and manufacturing optimization is achieved through time- and resource-intensive brute-force optimization. Despite increased interests in LFA manufacturing, more quantitative tools are needed to study current manufacturing protocols and therefore, optimize and streamline development of these devices further. In this work, we focus on a critical LFA component, colloidal gold conjugated to a detection antibody, one of the most commonly used reporter elements. This study utilizes inductively coupled plasma optical emission spectroscopy (ICP-OES) in conjunction with a lateral flow reader to quantitatively analyze colloidal gold distributions at the read-out test and control lines, as well as residual gold on the conjugate pad and other flow through regions. Our goals are to develop a more rigorous understanding of current LFA designs as well as a quantitative understanding of shortcomings of operational characteristics for future improvement. To our knowledge, this is the first time that ICP-OES has been used to study the initial distribution of colloidal gold on an unused LFA and its redistribution after a test is performed. Using three different brands of commercially available malaria LFAs, gold content was measured within each section of an LFA at varying parasite test concentrations. As expected, the total mass of gold remained unchanged after LFA use; however, the total mass of initial gold and its redistribution varied among manufacturers. Importantly, there are also some inherent inefficiencies that exist in these commercial LFA designs; for example, only 30% of the total gold deposited onto Brand A LFAs binds to the test and control lines, sections of the test that contain interpretable signal. Using information gathered with this method, future devices could be more purposefully engineered to focus on improved binding efficiency, resulting in reduced costs, improved limit of detection, and diminished test-to-test and manufacturer-to-manufacturer variability.

Chemometric methods for studying the relationships between trace elements in laryngeal cancer and healthy tissues

A quick and reliable method for the evaluation and classification of two types of tissues is presented. Several chemometric methods were applied to evaluate multivariate data of the tissue samples with respect to the content of trace elements. The content of Pb, Al, Zn, Cd, Cu, Ni and Co was determined in samples of healthy and cancerous tissue obtained from 26 patients. Determination was done at milligram/kilogram level with inductively coupled plasma optical emission spectrometry (ICP-OES) and atomic absorption spectroscopy (AAS) techniques. Contents of trace metals in studied tissues are not normally distributed; however, normal distribution was confirmed for log values. There is a statistically significant difference in the content of Zn, Cd, Cu and Al (p<0.01) and Ni and Co (p<0.05) when healthy tissue is compared to cancerous one. Correlation between contents of trace elements for studied tissues was positive; the highest was found between Zn and Cu. A chemometric methodology seems to be a promising tool for classifications of the tissue samples.

Effects of copper sulfate on seedlings of Prosopis pubescens (screwbean mesquite)

Phytoextraction is an established method of removal of heavy metals from contaminated soils worldwide. Phytoextraction is most efficient if local plants are used in the contaminated site. We propose that Prosopis pubescens (Screw bean mesquite) would be a successful phytoextractor of copper in our local soils. In order to determine the feasibility of using Screw bean mesquite, we utilized inductively-coupled plasma-optical emission spectroscopy (ICP-OES) and elemental analysis to observe the uptake of copper and the effects on macro and micro nutrients within laboratory-grown seedlings. We have previously shown that P. pubescens is a hyperaccumulator of copper in soil-grown seedlings. Light and transmission electron microscopy demonstrated death of root cells and ultrastructural changes due to the presence of copper from 50 mg/L - 600 mg/L. Ultrastructural changes included plasmolysis, starch accumulation, increased vacuolation and swollen chloroplasts with disarranged thylakoid membranes in cotyledons. Inductively coupled plasma-optical emission spectroscopy analyses of macro- and micro-nutrients revealed that the presence of copper sulfate in the growth medium of Petri-dish grown Prosopis pubescens seedlings resulted in dramatic decreases of magnesium, potassium and phosphorus. At 500-600 mg/L of copper sulfate, a substantial increase of sulfur was present in roots.

Comments on "Determination of mercury, cadmium, lead, zinc, selenium and iron by ICP-OES in mushroom samples from around thermal power plant in Muğla, Turkey". doi:10.1007/s00128-011-0357-1

In several articles on trace elements in mushrooms erroneous data were published on minerals sequestered in fruiting bodies. The biased analytical data published gave a false picture on the composition and nutritional value of mushrooms with respect to minerals. Wild mushrooms are relatively rich in trace elements and some species can hyperaccumulate certain metals. Selenium as reported in the referenced article is discussed in light of typical Se concentrations determined using validated methods as reported by other authors.

Using ICP-OES and SEM-EDX in biosorption studies

We have compared the analytical results obtained by inductively coupled plasma optical emission spectroscopy (ICP-OES) and by scanning electron microscopy with an energy dispersive X-ray analytical system (SEM-EDX) in order to explore the mechanism of metal ions biosorption by biomass using two independent methods. The marine macroalga Enteromorpha sp. was enriched with Cu(II), Mn(II), Zn(II), and Co(II) ions via biosorption, and the biosorption capacity of alga determined from the solution and biomass composition before and after biosorption process was compared. The first technique was used to analyze the composition of the natural and metal-loaded biomass, and additionally the composition of the solution before and after biosorption. The second technique was used to obtain a picture of the surface of natural and metal ion-loaded macroalgae, to map the elements on the cell wall of dry biomass, and to determine their concentration before and after biosorption. ICP-OES showed a better precision and lower detection limit than EDX, but SEM-EDX gave more information regarding the sample composition of Enteromorpha sp. Both techniques confirmed that biosorption is a surface phenomenon, in which alkali and alkaline earth metal ions were exchanged by metal ions from aqueous solution.FigureThe advantages and disadvantages of ICP-OES and SEM-EDX techniques ELECTRONIC SUPPLEMENTARY MATERIAL: The online version of this article (doi:10.1007/s00604-010-0468-0) contains supplementary material, which is available to authorized users.

Kinetin increases chromium absorption, modulates its distribution, and changes the activity of catalase and ascorbate peroxidase in Mexican Palo Verde

This report shows, for the first time, the effectiveness of the phytohormone kinetin (KN) in increasing Cr translocation from roots to stems in Mexican Palo Verde. Fifteen-day-old seedlings, germinated in soil spiked with Cr(III) and (VI) at 60 and 10 mg kg(-1), respectively, were watered every other day for 30 days with a KN solution at 250 μM. Samples were analyzed for catalase (CAT) and ascorbate peroxidase (APOX) activities, Cr concentration, and Cr distribution in tissues. Results showed that KN reduced CAT but increased APOX in the roots of Cr(VI)-treated plants. In the leaves, KN reduced both CAT and APOX in Cr(III) but not in Cr(VI)-treated plants. However, KN increased total Cr concentration in roots, stems, and leaves by 45%, 103%, and 72%, respectively, compared to Cr(III) alone. For Cr(VI), KN increased Cr concentrations in roots, stems, and leaves, respectively, by 53%, 129%, and 168%, compared to Cr(VI) alone. The electron probe microanalyzer results showed that Cr was mainly located at the cortex section in the root, and Cr distribution was essentially homogeneous in stems. However, proven through X-ray images, Cr(VI)-treated roots and stems had more Cr accumulation than Cr(III) counterparts. KN increased the Cr translocation from roots to stems.

Spectroscopic study of the impact of arsenic speciation on arsenic/phosphorus uptake and plant growth in tumbleweed (Salsola kali)

This manuscript reports the toxic effects of As2O3 (arsenic trioxide) and As2O5 (arsenic pentoxide) on S. kali as well as the arsenic and phosphate uptake and arsenic coordination within plant tissues. Plants were germinated and grown for 15 days on a Hoagland-modified medium containing either As(III) (arsenic trioxide) or As(V) (arsenic pentoxide). Subsequently, the seedlings were measured and analyzed using inductively coupled plasma optical emission spectroscopy and X-ray absorption spectroscopy techniques. Plants stressed with 2 mg L(-1) of whichever As(III) or As(V) concentrated 245 +/- 19, 30 +/- 1, and 60 +/- 3 mg As kg(-1) dry weight or 70 +/- 6, 10 +/- 0.3, and 27 +/- 3 mg As kg(-1) dry weight in roots, stems, and leaves, respectively. Arsenate was less toxic, and more As translocation occurred from the roots to the leaves. All treatments reduced P concentration at root level; however, only As(V) at 2 and 4 mg L(-1) reduced P concentration at leaf level. Regardless the arsenic species supplied to the plants, arsenic was found in plant tissues as As(III) coordinated to three sulfur ligands with an interatomic distance of approximately 2.25 angstroms.